summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2014-05-13southbridge/amd/sb?00/lpc.c: Move i8254/i8259 down in southbridgeEdward O'Callaghan
We should configure i8254/i8259 down in to the southbridge rather than romstage of every AGESA/CIMx board much like Intel boards do. Change-Id: Id7c4f0baa0819d52aef9b0ee03c20d0fa16b9352 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5669 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-12Rambi: Enable 32k SUSCLK signalKyösti Mälkki
The SoC needs to provide a 32k clock signal SUSCLK for some modems to work properly, so this enables the signal. BUG=chrome-os-partner:24425 TEST=Manual, check SUSCLK pin with a scope. Change-Id: Ibc0d5bb38a2c3e16f381dfc256097fdced67fd1c Reviewed-on: https://chromium-review.googlesource.com/180101 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Bernie Thompson <bhthompson@chromium.org> Signed-off-by: Bernie Thompson <bhthompson@chromium.org> Tested-by: Bernie Thompson <bhthompson@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5722 Reviewed-by: Aaron Durbin <adurbin@gmail.com> Tested-by: build bot (Jenkins)
2014-05-12rambi: Make eMMC CLK pull-down and change pull strengths to 20KShawn Nematbakhsh
eMMC CLK was incorrectly configured as PULL_UP, but should have been PULL_DOWN. 2K pulls somehow masked this problem. BUG=chrome-os-partner:24353 TEST=Verify eMMC is bootable on Rambi on boards that previously failed with an all-20K, all-PU eMMC pin configuration. BRANCH=None Change-Id: I0cbb6ebbb6818f83402b99330728266b09a0f5d6 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/181034 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5026 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-12baytrail: align with intel recommendationsAaron Durbin
The BISOC.EXIT_SELF_REFRESH_LATENCY field should not be updated from the default. BUG=chrome-os-partner:24345 BRANCH=None TEST=Built and booted. S3 resumed. Change-Id: I6e701a520513372318258648e998dd8c7ab29ea4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/180730 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/5025 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-12rambi: specify reference code index in vboot areaAaron Durbin
Rambi's reference code will live at slot 3 in the verified firmware section. BUG=chrome-os-partner:22867 BRANCH=None TEST=Built and booted. Verified correct area where reference code was loaded from. Change-Id: I8bee46600429ac8f732fe334852f69aff1324150 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/180027 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/5024 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-12baytrail: add way to load reference code from vboot areaAaron Durbin
When employing vboot firmware verification the reference code loading should load from the verified firmware section. Add this ability. BUG=chrome-os-partner:22867 BRANCH=None TEST=Built and booted rambi. Noted firmware being loaded from rw verified area. Also noted S3 resume loading from cached area. Change-Id: I114de844f218b7573cf90107e174bf0962fdaa50 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/180026 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/5023 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-12baytrail: Expose IOSF as ACPI objectDuncan Laurie
The kernel iosf driver uses HID INT33BD to probe and be provided the 12 bytes in PCI for access. BUG=chrome-os-partner:17279 BRANCH=none TEST=build and boot on rambi, load iosf_mbi driver and verify that it gets address 0xe00000d0 Change-Id: I865eafe664f00f21d1ebb967c291083830d895b9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/180098 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5021 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-12rambi: Disable HSUART2 and SPI interfacesDuncan Laurie
Not used currently on rambi board. Disable in case it saves power. BUG=chrome-os-partner:23862 BRANCH=none TEST=build and boot on rambi Change-Id: Idb870c2cfa88cb6c3f1ada3caf0db566e33ec1eb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/180084 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5020 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-12rambi: Enable SCC devices in ACPI modeDuncan Laurie
With the ACPI GNVS exported and depthcharge changed to initialize eMMC in ACPI mode we can now put the SCC devices into ACPI mode. BUG=chrome-os-partner:24380 BRANCH=none TEST=build and boot on rambi, test eMMC and SD card Change-Id: I39716198f8227c0c3293ac23eb09660792e2c51b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179901 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5018 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-12baytrail: Put devices in ACPI mode after setupDuncan Laurie
Make sure reg_script is executed before the device is put into ACPI mode. BUG=chrome-os-partner:24380 BRANCH=none TEST=build and boot rambi from eMMC in ACPI mode Change-Id: I4090babbfc7fb0f3be4da869386e998d87a513ba Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179896 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5017 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-12baytrail: Add header include wrapper and offset defineDuncan Laurie
Since this file will get added to payloads it is useful if it exports what offset in NVS it lives. BUG=chrome-os-partner:24380 BRANCH=none TEST=build and boot rambi with emmc in ACPI mode Change-Id: I52860980c91dfe2525628e142b34ca192e69b258 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179848 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5014 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-12superio/ite/it8718f: Remove hard coding from romstageEdward O'Callaghan
Make use of the ITE common Super I/O framework and there-by removing any hard coding of Super I/O base address. Change-Id: I14af89d2727d7c6bac0f9840043c430726297429 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5717 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-11superio/ite/*: Factor out generic romstage componentEdward O'Callaghan
Following the reasoning of: cf7b498 superio/fintek/*: Factor out generic romstage component Change-Id: I4c0a9a5a7786eb8fcb0c3ed6251c7fe9bbbadae7 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5585 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-05-11superio/ite/it8728f: RAMstage PNP configuration componentEdward O'Callaghan
Provide devicetree.cb RAMstage configuration of this superio component. Change-Id: I376d2fb6dafc301cbc437518012f8c43b0af4be2 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5668 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-05-11SeaBIOS: Fix cpp usePatrick Georgi
No need to pass CPP down to SeaBIOS, it's not architecture specific and they define their own variable. Change-Id: I811aaf3929fa11cc01b7f168ccd310008e21e60c Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5715 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-10Arch-level Kconfig menu cleanupFurquan Shaikh
Remove arch-level Kconfig menu option as it shows all available architectures in make menuconfig. Instead pull the bootblock options for choice and update image to top-level Kconfig since it is already present for both x86 and arm. Change-Id: Iab9c4539f05cd54a7f751565fefcaf7b6f0edc86 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5673 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-10Replace SERIAL_CPU_INIT with PARALLEL_CPU_INITKyösti Mälkki
Lines with 'select SERIAL_CPU_INIT' where redundant with the default being yes. Since there is no 'unselect SERIAL_CPU_INIT' possibility, invert the default and rename option. This squelches Kconfig warnings about unmet dependencies. Change-Id: Iae546c56006278489ebae10f2daa627af48abe94 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5700 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-10mainboard/jetway/nf81-t56n-lf: Toggle WDT and CIR in devicetree.cbEdward O'Callaghan
Turn on WDT support in the devicetree. Turn off CIR support. Dispense with old commentary. Change-Id: Icf0c0e12a0ed7ce6c3b6176653e076ffc2ba937e Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5698 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-10superio/fintek/f71869ad: Fix incorrect LDN'sEdward O'Callaghan
Turns out there are a few minor differences of the LDN's in the AD rev. of this Fintek chip. 0x07 is in fact the WDT so renaming and remove the now incorrect io mask. Add missing CIR LDN functionality and touch up src inline doc. Change-Id: I440aebad71d62d199d3283dd061933e76b21dda5 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5696 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-10baytrail: cache reference code for S3 resumeAaron Durbin
In order to use the same reference code on S3 resume that was booted the program needs to be cached. Piggy back on the ramstage cache to save the loaded reference code program. BUG=chrome-os-partner:22867 BRANCH=None TEST=Built and booted. S3 resumed. Noted locations of reference code caching and load addresses in console. Change-Id: I90ceaf5697e8c269c3244370519d4d8a8ee2eb4a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179777 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/5013 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-10baytrail: allow ramstage_cache_location() usage in ramstageAaron Durbin
To prepare for caching reference code for S3 resume the ramstage cache needs to be accesible in ramstage as well. BUG=chrome-os-partner:22867 BRANCH=None TEST=Built and booted. S3 resumed. Change-Id: I4c825c965b98cd71ea0eb9c93fe168a358da4c97 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179776 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/5012 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-10ramstage_cache: allow ramstage usage add valid helperAaron Durbin
Allow ramstage cache to be used from ramstage proper. Also add a helper function for checking validity of ramstage cache structure. BUG=chrome-os-partner:22867 BRANCH=None TEST=Built and booted. S3 resumed. Change-Id: If1f2ad1bcf64504b42e315be243a12432b50e3d5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179775 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/5011 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-10baytrail: note S3 resume status earlierAaron Durbin
Certain code paths want to know if S3 resume is happening. However, the current baytrail code doesn't note S3 resume early enough. Therefore, mark S3 resume just after pattr setup. BUG=chrome-os-partner:22867 BRANCH=None TEST=Built and booted. S3 resumed. Change-Id: I5e5cc285940e4567521afb8483614ce6f813ddde Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179774 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/5010 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-10baytrail: utilize reg_script_run_on_dev()Aaron Durbin
The inclusion of reg_script_run_on_dev() allows for removing some of the chained reg_scripts just to set up the device context. Use the new reg_script function in those cases. BUG=None BRANCH=None TEST=Built and booted. Didn't see any bizarre dmesg or coreboot console output. Change-Id: I3207449424c1efe92186125004d5aea1bb5ba438 Signed-off-by: Aaron Durbin <adurbin@chromium.og> Reviewed-on: https://chromium-review.googlesource.com/179541 Tested-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5009 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-10baytrail: initialize perf/power registersAaron Durbin
According to the reference code all these registers need to be set to their best known values. BUG=chrome-os-partner:24345 BRANCH=None TEST=Built and booted. Suspend and wake. No idea about observable impact yet. Change-Id: I0e31505a165eee1d177e5d726edcfa6947430476 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179749 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/5008 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-10baytrail: add more iosf access functionsAaron Durbin
There's a slew of ports required to initialize baytrail's perf and power values. Therefore, add the necessary functionality in the iosf module as well as the reg_script library. BUG=chrome-os-partner:24345 BRANCH=None TEST=Built and booted. Change-Id: Id45def82f9b173abeba0e67e4055f21853e62772 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179748 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/5007 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-10baytrail: remove verbosity in iosfAaron Durbin
The iosf access functions already use some common code, however there is a duplication for setting up the proper control register for port and opcode. Introduce macros to remove this verbosity. BUG=chrome-os-partner:24345 BRANCH=None TEST=Built and booted. Suspend and wake. Change-Id: I5bad7e2a11fa8e8bd4a3d7fa53d917b2565644f8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179747 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/5006 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-10reg_script: add reg_script_run_on_dev()Aaron Durbin
The reg_script library has proven to be useful. It's also shown that many scripts operate on devices. However, certain code paths run the same script on multiple, but different, devices. In order to make that easier introduce reg_script_run_on_dev() which takes a device as a parameter. That way, chained reg_scripts are not scrictly needed to run the same script on multiple devices. BUG=None BRANCH=None TEST=Built. Change-Id: I273499af4d303ebd7dc19e9b635ca23cf9bb2225 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179540 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/5005 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-10baytrail: Add support for LPSS and SCC devices in ACPI modeDuncan Laurie
This adds the option to put LPSS and SCC devices into ACPI mode by saving their BAR0 and BAR1 base addresses in a new device NVS structure that is placed at offset 0x1000 within the global NVS table. The Chrome NVS strcture is padded out to 0xf00 bytes so there is a clean offset to work with as it will need to be used by depthcharge to know what addresses devices live at. A few ACPI Mode IRQs are fixed up, DMA1 and DMA2 are swapped and the EMMC 4.5 IRQ is changed to 44. New ACPI code is provided to instantiate the LPSS and SCC devices with the magic HID values from Intel so the kernel drivers can locate and use them. The default is still for devices to be in PCI mode so this does not have any real effect without it being enabled in the mainboard devicetree. Note: this needs the updated IASL compiler which is in the CQ now because it uses the FixedDMA() ACPI operator. BUG=chrome-os-partner:23505,chrome-os-partner:24380 CQ-DEPEND=CL:179459,CL:179364 BRANCH=none TEST=manual tests on rambi device: 1) build and boot with devices still in PCI mode and ensure that nothing is changed 2) enable lpss_acpi_mode and see I2C devices detected by the kernel in ACPI mode. Note that by itself this breaks trackpad probing so that will need to be implemented before it is enabled. 3) enable scc_acpi_mode and see EMMC and SDCard devices detected by the kernel in ACPI mode. Note that this breaks depthcharge use of the EMMC because it is not longer discoverable as a PCI device. Change-Id: I2a007f3c4e0b06ace5172a15c696a8eaad41ed73 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179481 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5004 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-09cougar_canyon2: Switch CPU/NB/SB to the shared FSP codeMartin Roth
CPU - fsp_model_206ax: - Remove Kconfig options and mark this as using the FSP. - Use shared FSP cache_as_ram.inc file Mainboard - intel/cougar_canyon2: - Update to use the shared FSP header file. - Modify to call copy_and_run() directly instead of returning to cache_as_ram.inc. Northbridge - fsp_sandybridge: - remove mrccache, fsp_util.[ch] - add fsp/chipset_fsp_util.[ch] with chipset specific FSP bits. - Update to use the shared FSP header file. These changes were validated with FSP: CHIEFRIVER_FSP_GOLD_001_09-OCTOBER-2013.fd SHA256: e1bbd614058675636ee45f8dc1a6dbf0e818bcdb32318b7f8d8b6ac0ce730801 MD5: 24965382fbb832f7b184d3f24157abda Change-Id: Ibc52a78312c2fcbd1e632bc2484e4379a4f057d4 Signed-off-by: Martin Roth <gaumless@gmail.com> Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5636 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-05-09Intel FSP: add a shared set of functions for the FSPMartin Roth
- Move the non chipset-specific fsp pieces out of the chipset into a shared area. This is used by northbridge / southbrige / SOC code. It pulls in pieces from Kconfig, Makefile and FSP specific code. - Enabled in the CPU code with a Kconfig "select PLATFORM_USES_FSP" Change-Id: I7ffa934c1df09b71d48a876a56e3b888685870b8 Signed-off-by: Martin Roth <gaumless@gmail.com> Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5635 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-05-09superio/serverengines/pilot: Avoid .c includesEdward O'Callaghan
Following the same reasoning as commit d3043313a91dff3bc2f879ffb3b4bf23a364d711 superio/fintek/f81865f: Avoid .c includes Clean up the early_serial #include directives in mainboard/romstage code. Change-Id: Ia6ed36c8517a95b651fefdd855eec0ec91d73187 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5439 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-09Squelch some warnings from KconfigKyösti Mälkki
Overriding global config entries in mainboard directory Kconfig files often raise unnecessary warnings. Squelch some of those. Change-Id: Ib5127672ae068670028aa25c8ccb5366277622f2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5699 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-09rambi: Enable DPTFDuncan Laurie
This enables the DPTF framework, but it doesn't do much without some sort of kernel+user components to drive it. BUG=chrome-os-partner:17279 BRANCH=none TEST=build and boot on rambi, dump DSDT and look over \_SB.DPTF Change-Id: Icb632a6e70c3912bbdfa6ef3f5c87cd79d2b8a3a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179480 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5003 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-09baytrail: Basic DPTF frameworkDuncan Laurie
This is not complete yet but it compiles and doesn't cause any issues by itself. It is tied into the EC pretty closely so that is part of the same commit. Once we have more of the EC support done it will need some more work to make use of those new interfaces properly. BUG=chrome-os-partner:17279 BRANCH=none TEST=build and boot on rambi, dump DSDT and look over \_SB.DPTF Change-Id: I4b27e38baae18627a275488d77944208950b98bd Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179459 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5002 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-09rambi: Set panel power timingsDuncan Laurie
These are the values that are seen with VBIOS and may need tweaked for derivative panels. BUG=chrome-os-partner:24367 BRANCH=none TEST=boot on rambi in normal mode and see the panel come up Change-Id: Ie3120ab3c5298135626e8534d3954acd263dc74b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179365 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5001 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-09baytrail: Enable panel and set timingsDuncan Laurie
These need to be set before the kernel will work without running the VBIOS option rom. Also necessary is setting the PP_CONTROL register with the EDP_FORCE_VDD bit. BUG=chrome-os-partner:24367 BRANCH=none TEST=boot on rambi in normal mode and see the panel come up Change-Id: I495f818d581d08b80db11785fe28b601ec956b3b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179364 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5000 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-09rambi: change SD card pulls to 20KAaron Durbin
Now that the SD card controller is limited to the SD card 2.0 spec it's possible to use 20K pulls for the pads. BUG=chrome-os-partner:24423 BUG=chrome-os-partner:24312 BRANCH=None TEST=Built and booted. Able to dd to/from /dev/mmcblk1 without any errors. Change-Id: Id5396c55330a84bf7a09d227507d2bfcde66a1a4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179423 Reviewed-on: http://review.coreboot.org/4999 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-09rambi: limit SD card controller to 2.0 specAaron Durbin
The rambi board can only meet the SD card 2.0 specification. Therefore, the controller capabilities need to be overridden to match. BUG=chrome-os-partner:24423 BRANCH=None TEST=Built and booted. /sys/kernel/debug/mmc0/ios shows high speed as maximum timing as well as 3.3V signal voltage. Change-Id: Ib3824800852376e0f15a70584917d6692087ccfe Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179415 Reviewed-on: http://review.coreboot.org/4998 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-09baytrail: allow SD card controller capabilities overridesAaron Durbin
The SD card controller can have the capabilities it supports to be overridden. Add two optional fields to the chip structure to allow the mainboard to override the SD card controller capabilities. BUG=chrome-os-partner:24423 BRANCH=None TEST=Built and booted. Noted capabilities override console output. Change-Id: Ibfef8f765b35eeec6da969dd05f5484f8672a7b9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179414 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4997 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-09baytrail: fix nvs offsetsAaron Durbin
The VDAT data was off by 2 bytes when reading it from the kernel. The reason is that the header did not line up correctly with actual ACPI code. BUG=chrome-os-partner:24440 BRANCH=None TEST=crossystem devsw_cur now returns either 0 or 1 depending on state. Change-Id: Ie78599f29cd5daf7da98db5e37fa276d24339f6a Signed-off-by: Aaron durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179372 Reviewed-on: http://review.coreboot.org/4996 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-09rambi: export SPI write-protect GPIO correctlyAaron Durbin
Bay Trail has 3 banks of gpios. Therefore, in order to properly identify a gpio the specific bank number as well as the GPIO within that bank is needed. The SPI write-protect GPIO is GPIO 6 within the SUS bank (offset 0x2000). BUG=chrome-os-partner:24324 BUG=chrome-os-partner:24408 BRANCH=None TEST=Built and booted. Looked at GPIO sysfs in the chromeos_acpi directory. Change-Id: Ic51b5abe3bacf6cf9b6a90cf666f1a63b098a0e3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179195 Reviewed-on: http://review.coreboot.org/4995 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-09baytrail: lpe audio device needs memory for its firmwareAaron Durbin
The LPE audio device needs 1MiB of memory for its firmware. It also has a requirement that the memory needs to be on a 512MiB boundary. Just take 1MiB @ 512MiB for the LPE device. BUG=chrome-os-partner:23791 BRANCH=None TEST=Built and analyzed console logs for resources. Also interrogated registres within the kernel. Change-Id: I4d9ad5c7b5a2f3eb627b30528d738289278b3a7b Reviewed-on: https://chromium-review.googlesource.com/179192 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Tested-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4994 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08ChromeOS boards: Always build code for bootmode strapsKyösti Mälkki
Leave it under BOOTMODE_STRAPS to control whether these have any functional meaning on the build. Change-Id: Ieb59aa7ab4b1e8da6a1002e7a8e5462eb7988d35 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5643 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-08ChromeOS boards: Fix includesKyösti Mälkki
Change-Id: Ib8448f3d36a23538cd9fea897f09da3ec4ad007a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5647 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-08Declare get_write_protect_state() without ChromeOSKyösti Mälkki
Change-Id: I72471ac68088cd26f8277b27b75b7d44ad72cfc4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5642 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-05-08Rename from save_chromeos_gpios() to init_bootmode_straps()Kyösti Mälkki
This feature is no longer specific to ChromeOS builds. Change-Id: If27d4dc7caff8a551b5b325cdebdd05c079ec921 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5641 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-05-08ChromeOS boards: Use explicit include of chromeos.cKyösti Mälkki
Change-Id: I7b3d044fad1d6973910e9bef347478a45c149a4f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5640 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-05-08superio/fintek/f71869ad: Make hwm devicetree configurableEdward O'Callaghan
Provision the configuration of the Fintek F71869AD Hardware Monitor's configuration by way of devicetree.cb. Make use of this in the jetway/nf81-t56n-lf board to properly control fan's. Change-Id: Ic25b29d1b7a9145e0e209b490b25a2cbc46cb75c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5580 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-08superio/fintek/f71869ad: Configure multi-func reg in devicetreeEdward O'Callaghan
Facilitate for the configuration of so called "Multi-function Select Registers" with devicetree.cb in ramstage. Make use of this new functionality in, mainboard/jetway/nf81-t56n-lf to correctly configure the Fintek's multiplexed GPIO pins to be in AMD TSI mode. This allows the Fintek to correctly talk to the Southbridge over the SMBus for CPU temperature data as to control fans and so on. Change-Id: I80abcd8b767fc4b22d00d1384ce4ef89fe837e3d Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5576 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08mainboard/jetway/nf81-t56n-lf: Improve diags in romstageEdward O'Callaghan
romstage reports a completely unintelligible printf of "error level:", fix this and document meaning of the return values in source. Change-Id: Ia2fb9a6206e08822f6c2f62b69bf22cdae2ba819 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5465 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-08rambi: Make ec_in_rw a legacy GPIOShawn Nematbakhsh
ec_in_rw needs to be read by depthcharge, which only supports legacy GPIOs. BUG=chrome-os-partner:24408 TEST=Manual on Rambi. Cold + warm boot device, verify that depthcharge detects the proper ec_in_ro state. BRANCH=None Change-Id: I25802b445c795eb85580c22d880efee8eeb21318 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179228 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4993 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2014-05-08baytrail: gpio: Make GPIO inputs MMIO by defaultShawn Nematbakhsh
The Linux kernel driver cannot handle Baytrail legacy GPIOs, so make the default input GPIO type MMIO. BUG=chrome-os-partner:24408 TEST=Manual on Rambi. Run "echo 169 > /sys/class/gpio/export; cat /sys/class/gpio/gpio169/value", verify GPIO value changes based upon mic jack status. BRANCH=None Change-Id: I27870ce8b7ecae9228e06e48c8759409c824c2eb Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179169 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4992 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08rambi: Change eMMC pin PUs to 2KShawn Nematbakhsh
Strengthen PUs on all eMMC pins to fix problems with eMMC not coming up on certain boards. BUG=chrome-os-partner:24353 TEST=Manual. Burn FW on board that previously failed to boot eMMC, verify chromeos can now install + boot from eMMC. BRANCH=none Change-Id: I7a9742968b8b8c2c42285ffc21de46aed9c87fb7 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178917 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4991 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08rambi: configure SD card signalsAaron Durbin
Rambi 1.5 boards use the native SD card controller on baytrail. Therefore, enable those signals. The CLK, D*, and CMD pins use 2K pulls as these were shown to not exhibit any errors when doing reads or writes to a DDR50 sd card. Note that if a servo is connected on needs to enable the sd_vref_sel rail to pp1800 as this causes issues with card detect if it is not set to pp1800. BUG=chrome-os-partner:24312 BRANCH=None TEST=Built and booted. Tested sd card read and write works in kernel. Also noted that write protect detection works as well. Change-Id: I520e2808acbd8494534fcb710411dbc0e12fc874 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178961 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4990 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08baytrail: enable lpe resources assigned to deviceAaron Durbin
The enable_resources callback was accidentally populated with NULL. Make that callback be the generic pci_dev_enable_resources. BUG=chrome-os-partner:23791 BRANCH=None TEST=Built and booted. Change-Id: I670b51bd9aff6764e9b549287a737b662572cdc7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178960 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4989 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08baytrail: Fix _CRS to build with new IASLDuncan Laurie
The new IASL is complaining about the PCI memory region not having consistent base/end/length values because they are placeholder that are fixed up in the method before returning. Put in some more valid placeholder values to make it happy. BUG=chromium:311294 BRANCH=none TEST=build and boot with IASL 20130117 on rambi Change-Id: I0e21adcce43deb14d3c2c45787ff8c9efc357c2f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178864 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Duncan Laurie <dlaurie@google.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4988 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08rambi: configure the LPE audio codec clockAaron Durbin
Rambi has the LPE audio codec connected to PMC_PLT_CLK[0]. Configure it for 25MHz. BUG=chrome-os-partner:23791 BRANCH=None TEST=Built and booted. Noted message in console output. Change-Id: I11297ba951149e5831c65ca70ac7bdbbed113098 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178781 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4987 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-08baytrail: add lpe codec clock configurationAaron Durbin
Add device tree option to determine if the LPE audio codec has a platform clock signal connected to it from the SoC. If a frequency is selected the platform clock number is used to enable the clock. BUG=chrome-os-partner:23791 BRANCH=None TEST=Built and booted rambi with 25MHz option. Probed pin to audio codec. Noted 25MHz clock. Change-Id: I67d0d034f30ae1c7ee8269c0aea43e8c92ff868c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178780 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4986 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08baytrail: Add ACPI code to describe GPIO controllerDuncan Laurie
There are 3 banks of GPIOs that need to be described with specific _UID and memory/interrupt values. BUG=chrome-os-partner:24314 BRANCH=none TEST=build and boot on rambi, check for probed driver: gpiochip_find_base: found new base at 154 gpiochip_add: registered GPIOs 154 to 255 on device: INT33FC:00 gpiochip_find_base: found new base at 126 gpiochip_add: registered GPIOs 126 to 153 on device: INT33FC:01 gpiochip_find_base: found new base at 82 gpiochip_add: registered GPIOs 82 to 125 on device: INT33FC:02 fed0c000-fed0cfff : INT33FC:00 fed0c000-fed0cfff : INT33FC:00 fed0d000-fed0dfff : INT33FC:01 fed0d000-fed0dfff : INT33FC:01 fed0e000-fed0efff : INT33FC:02 fed0e000-fed0efff : INT33FC:02 Change-Id: I9619e2af4e1ccdf3d7b2e4ae280aadf22e278aeb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178601 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4985 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08baytrail: Update to microcode 31E and fix C-state tableDuncan Laurie
With microcode 31E MWAIT 0x51 is now C6NS and 0x52 is now C6FS. BUG=chrome-os-partner:23505 BRANCH=none TEST=build and boot on rambi, check that C1/C2/C3 are all used now Change-Id: I8528d808f4082c85d90e2b57747d9f2e2d982b85 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178461 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4984 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-07baytrail: minor stylePatrick Georgi
use IS_ENABLED() over #if brackets Change-Id: I101f99971c0f7b5311ef19cc9832713ab0696935 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5692 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-07rambi: Remove outdated commentPatrick Georgi
Change-Id: Ic555d23a9112677a784dd814601f8202d4d17261 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5691 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-07rambi: handle single channel configsAaron Durbin
Some 1.5 boards have a single channel ram configuration. Accomodate such configs. BUG=chrome-os-partner:22865 BRANCH=None TEST=Built and booted ChromeOS. Change-Id: I513327e47b9211d2dd1ea960d7da671a3773cb91 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178340 Reviewed-by: Nick Sanders <nsanders@chromium.org> Tested-by: Bernie Thompson <bhthompson@chromium.org> Tested-by: Nick Sanders <nsanders@chromium.org> Reviewed-on: http://review.coreboot.org/4983 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: romstage: Add config option to enable RMTShawn Nematbakhsh
Add config option to enable RMT in the MRC. BUG=chrome-os-partner:21807 TEST=Manual. Build w/ "USE=rmt", verify RMT print seen on FW console. Build w/o USE flag, verify no RMT print. BRANCH=None. CQ-DEPEND=CL:*148655 Change-Id: Ibd3da87317a3359e797d9b43bc437e7227a85048 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178095 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4982 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: pcie: Root port initializationAaron Durbin
Add PCIe driver to initialize root ports. BUG=chrome-os-partner:24111 TEST=Manual on Rambi. Verify that PCIe Wifi card is detected and able to detect networks. BRANCH=None. Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Change-Id: I3c68da5f27cd162e112add488bdf5ced192b7d12 Reviewed-on: https://chromium-review.googlesource.com/177652 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4981 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: gpio: Fix NCORE gpio-to-pad LUTShawn Nematbakhsh
NCORE pad addresses were wildly wrong due to documentation bugs. BUG=chrome-os-partner:24179 TEST=Manual on Rambi. Verify display isn't always on. Verify brightness control now works in Chrome OS. BRANCH=None. Change-Id: I464436a58baa4957329c11231c5a866dafd97ce8 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/177597 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4980 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07rambi: use SERIRQ pad as keyboard irq in gpio modeAaron Durbin
The level shifting between 3.3V and 1.8V for the SERIRQ signal is not working. Instead use the SERIRQ pad as a gpio which is used as a direct IRQ signal for the keyboard interupt. BUG=chrome-os-partner:23965 BRANCH=None TEST=Built and booted rambi. Keyboard works with associated EC change. CQ-DEPEND=CL:177189 Change-Id: Ifc270ca38207828a6d4711551d4bde9121559cca Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/177223 Tested-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-on: http://review.coreboot.org/4979 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07rambi: make ramids non-legacy gpio inputsAaron Durbin
The romstage code for rambi uses the mmio way of reading inputs. However, this is a problem is the GPIOs are set up as legacy mode. Subsequent warm resets mean the ram_id is read incorrectly. Ensure the ram_id is read consistently by keeping the GPIOs for ram_id in mmio mode. BUG=chrome-os-partner:24085 BRANCH=None TEST=Built and booted. And rebooted. Now seeing consistent ram_id values on warm resets. Change-Id: Ieff98c000be80998854f325754f1e819975d2be5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/177230 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4977 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: enable caching and prefetching in spi controllerAaron Durbin
The default mode of the SPI controller has prefetching disabled. That obviously has a performance impact. Enable both caching and prefetching to make booting faster. This has a significant impact on streaming data out of SPI. BUG=chrome-os-partner:24085 BRANCH=None TEST=Built and booted rambi. Payload loading step went from ~285ms to ~54ms. Change-Id: I065cf44e1de7dcefc49aa9ea9ad0204929ab26f4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/177220 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4976 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: fix direct irq pad configurationAaron Durbin
When a pad is configured for direct IRQ it needs to be in non-legacy. Additionally, the signal is passed directly to the APIC by setting the LEVEL and TPE bits in the pad config register. The APIC can then be configured for level, edge, and rising/falling. BUG=chrome-os-partner:24037 BUG=chrome-os-partner:22863 BRANCH=None TEST=Built and booted with this config. Trackpad is firing interrupts more than it should, but it appears to be a trackpad firmware and/or configuration issue. Change-Id: I00042b2ddba67d6bf23f0e7468d0719196e6f865 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176793 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4975 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: ensure init_chromeos() is called in romstageAaron Durbin
The TPM needs to have the TPM_Startup command sent to it on all boot paths. The call init_chromeos() in romstage_common() fulfills this requirement. BUG=chrome-os-partner:24057 BRANCH=None TEST=Built and booted. Was able to suspend to ram multiple times in a row. Change-Id: Id0339a9d82897249d20ff5f62d2dcb8b535310fa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176803 Reviewed-by: Todd Broch <tbroch@chromium.org> Tested-by: Todd Broch <tbroch@chromium.org> Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4974 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-07rambi: distribute IRQs away from PIRQA on pci devicesAaron Durbin
Some of the drivers in the kernel were not so happy about having shared IRQs. Also, sharing IRQs means more code needs to be run in interrupt context to determine if the IRQ was meant for a particular device. Fix this. No more 'mmc1: got irq while runtime suspended' messages. BUG=chrome-os-partner:24056 BRANCH=None TEST=Built and booted. Looked at /proc/interrupts and noted no more sharing between pci devices. Change-Id: Ie5da102204ffe3156dd55ab17af77df245a57c97 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176792 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4973 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07superio/common/conf_mode: Provide another common pnp entry/exitEdward O'Callaghan
ITE Super I/O's make use of this method to enter and exit in and out of their PNP configuration. Provide functions for use in ram stage component. Change-Id: I2b546c2b17eefc89aaab4982192f5e9a15a16c2f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5666 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-05-07baytrail: don't allow PCIE wake upsAaron Durbin
The PCIe subsystem was constantly waking up boards from S3 and S5. Completely disable PCIe wake ups. It can be made mainboard-configurable later if needed. BUG=chrome-os-partner:24004 BRANCH=None TEST=Both S3 and EC RW->RW update (trip through S5) don't cause wakeups. Change-Id: I922e2947c4b6e29277d913f06192601a2954f8fe Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176791 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4972 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: gpio: Make pad input/output state mutually exclusiveShawn Nematbakhsh
Previously pads were being configured as both input and output simultaneously due to the config bits being active low. Create new defines that only enable either input or output, and use them in our GPIO configs. BUG=chrome-os-partner:22863 TEST=Manual on Rambi. Verify system boots and peripherals still function. BRANCH=None. Change-Id: If386682a3d810864b7b9f5d2aecdb2e6cfceea86 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176725 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4971 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07rambi: fixup settings so trackpad can be found in kernelAaron Durbin
The kernel chromeos_laptop driver nomenclature expects the board name to not be in all caps. Fix this as well as the i2c address for the trackpad. BUG=chrome-os-partner:24307 BRANCH=None TEST=Built and booted. trackpad device is found. IRQs still not working yet. Change-Id: Id6be8ee4bce2835e303ea4fe63944be80d2d7ec2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176680 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4970 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: first pass at lpss device initializationAaron Durbin
This commit does the common parts for all LPSS devices that are enabled: enable snoop in IOSF and enable power management. Additionally, the i2c devices are taken out of reset. BUG=chrome-os-partner:23790 BRANCH=None TEST=Built and booted with modified kernel-next. I2C bus devices show up and I see 0x10 on one of the buses. Change-Id: I540caea6a8666f5684dc5cee683a6b085dfac6de Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176424 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4969 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07reg_script: add iosf lpss port accessAaron Durbin
Add the LPSS IOSF port access to reg_script. This is going to be used by baytrail. BUG=chrome-os-partner:23790 BRANCH=None TEST=Buit. Change-Id: I0367acdb584f2de0bb871b136042b57fe6b7ec90 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176423 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4968 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: initialize eMMC deviceAaron Durbin
The eMMC device is initialized as version 4.5 with HS200 speeds. BUG=chrome-os-partner:23966 BRANCH=None TEST=Built and booted rambi to login screen off of eMMC device. Change-Id: I686c6136005fcb2587b939ddea293f4398df9868 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176536 Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4967 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: initialize common SSC functionalityAaron Durbin
The SSC (storage control cluster) houses the SD, SDIO, and eMMC interfaces. The scc cofniguration function, baytrail_init_scc(), is ran in the pre device stage to initialize the SCC. The eMMC is expected to be configured for version 4.5. BUG=chrome-os-partner:23966 BRANCH=None TEST=Built and booted with some other eMMC changes into login screen off of eMMC device. Change-Id: I81cc755a790b7e43ad234a8201dae480277202c8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176535 Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4966 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07reg_script: add iosf paths for score, ccu, and sscAaron Durbin
Handle SCORE, CCU, and SSC IOSF accesses. BUG=chrome-os-partner:23966 BRANCH=None TEST=Built. Change-Id: I6e678eb79bd1451f156bdd14cf46d3378dc527c9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176534 Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4965 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: add score and ssc iosf access functionsAaron Durbin
The SCORE allows controlling the pad configuration while the SSC handles the configuration for the storage control cluster. BUG=chrome-os-partner:23966 BRANCH=None TEST=Built. Change-Id: Ifd9f67a4e88d5bb99faec6ceeb3e263001a87c41 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176533 Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4964 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07rambi: Add DIRQs for trackpad and touchscreenShawn Nematbakhsh
Also add the relevant info about these pins to the ASL tables + add SMBIOS type 41 data for these parts. BUG=chrome-os-partner:22863 TEST=Manual on Rambi. Set some pins to GPIO_DIRQ, and then verify DIRQ regwrites w/ GPIO_DEBUG look correct. Change-Id: Id40655f9fb2ea7b10e1ff58d0b2a8b4cc6f05ff8 Reviewed-on: https://chromium-review.googlesource.com/176299 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4963 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-06Introduce stage-specific architecture for corebootFurquan Shaikh
Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-05-06baytrail: gpio: Add support for direct / dedicated IRQsShawn Nematbakhsh
Add support for DirectIRQ / dedicated IRQs. This consists of up to 16 IRQs for both SCORE and SSUS banks. BUG=chrome-os-partner:22863 TEST=Manual on Rambi. Set some pins to GPIO_DIRQ, and then verify DIRQ regwrites w/ GPIO_DEBUG look correct. Change-Id: I4b0dc6e7ae86c9f554b6e78792239234f702764c Reviewed-on: https://chromium-review.googlesource.com/176165 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4962 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: disable HDA deviceAaron Durbin
For some reason HDA can now be disabled. It's unclear what changes in the baytrail code allowed this to happen, sadly. BUG=chrome-os-partner:22871 BRANCH=None TEST=Noted hda is not in lspci. Change-Id: I64e2560533be6f701fa66cd53c906b62b09012ed Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176394 Reviewed-on: http://review.coreboot.org/4961 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: enable SCI and SMI gpiosAaron Durbin
Rambi has 3 pins that need to be configured for SCI and SMI: 1. GPIO_CORE[0] - runtime SCI pin 2. GPIO_SUS[7] - SMI for firmware lid events 3. GPIO_SUS[0] - wake pin for S3 wakes from EC. Configure these pins now that the rest of the infrastructure is in place. The one thing that is yet to work is runtime SCI for lid events once booted. BUG=chrome-os-partner:23505 BRANCH=None TEST=built and booted. lid close at rec screen works. And wake from S3 with a keyboard press works. Change-Id: I5f8e38ec5f4cf1a8ef7aa7fcee9abc344d9b184f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176393 Reviewed-on: http://review.coreboot.org/4960 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: mainboard EC - SCI and SMI fixesAaron Durbin
As rambi is a baytrail board it doesn't have a dedicated wake pin. Therefore, one needs to enable the proper GPIO to wake up the sytem before going into S3. BUG=chrome-os-partner:23505 BRANCH=None TEST=Put system into S3. Keyboard press created wake event. Also, typed 'lidclose' on EC console while at recovery screen. Machine properly shutdown. Change-Id: Ic67b6bce93d57c620f498505d83197e4ae34a07d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176392 Reviewed-on: http://review.coreboot.org/4959 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: add GPIO SMI supportAaron Durbin
GPIOs which trigger SMIs only set the status bits in the ALT_GPIO_SMI regier. No bits in the SMI_STS register are set. Therefore, the ALT_GPIO_SMI register needs to be read and cleared on every SMI. Additionally, the mainboard_gpi_smi() handler needs to be called as well on every SMI because of this property. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted to recovery screen. Typed 'lidclose' on EC console. SMI occurred which caused the board to be shutdown. Change-Id: Ic204d8b928a0cb4f51f108a649f374d9f94e4f47 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176391 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4958 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: add support for routing gpio pins to smi/sciAaron Durbin
In order for gpio pins to trigger an smi/sci the GPIO_ROUT register needs to be set accordingly. For SMI, the ALT_GPIO_SMI register needs to be enabled for each gpio as well. The first 8 gpios from the suspend and core well are the only gpios that can trigger an SMI or SCI. The settings for the GPIO_ROUT and ALT_GPIO_SMI register are not commited until the SMM settings are enabled in the southcluster. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted. Manually triggered SCI by changing GPE0a_EN and toggling PCH_WAKE_L on the EC console. Change-Id: Id79b70084edc39fc047475e984494c224bd75d6d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176390 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4957 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: fix fadt structure for gpe0 blockAaron Durbin
The gpe0 block's size was being misreported. Correct the gpe0 size and use make the FADT fields be more robust instead instead of hand calculating fields that are the based on the same size. This change correctly enables GPE events in the kernel. Confirmed this by using iotools read the gpe_cnt register. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted. Confirmed EC's GPE event is enabled (but still not working). Change-Id: I415710f7fec2e95cecee3bf679ee673dacc27480 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176271 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4956 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: Add microcode/punit release 31aDuncan Laurie
BUG=chrome-os-partner:23505 BRANCH=none TEST=build and boot on rambi Change-Id: I89c25142245cd268f755210784fd9d0c60dc5661 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176305 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Tested-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4955 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: Add ACPI CPU entriesDuncan Laurie
- C-state table based on static config MWAIT values are from ref code for non-S0ix config C6 substate 8 is ignored by the kernel as it violates the CPUID but it is left in as the other substate may not work. - P-state table generated with proper ratio and VID values relies on having the package power msr set to magic value as the power-on default is wrong - T-state table uses static table BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: I7c997e58cb3a71d0ec413b17f0c5467bef4bf62c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175742 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4954 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: Add BCLK and IACORE to pattrsDuncan Laurie
The bus clock speed is needed when building ACPI P-state tables so extract that function and have the value be saved in pattrs. The various IACORE values are also needed, but rather than have the ACPI code to the bit manipulation have the pattrs store an array of the possible values for it to use directly. BUG=chrome-os-partner:23505 BRANCH=none TEST=build and boot on rambi Change-Id: I5ac06ccf66e9109186dd01342dbb6ccdd334ca69 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176140 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4953 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: Enable Turbo/Burst and set some magic MSRsDuncan Laurie
As far as I can tell turbo enabling behaves like it did on haswell so use the standard code. There are also some magic values to set in some magic MSRs related to turbo and package power so they report correctly. The L2 cache shrink is enabled and a threshold is set that makes both dual and quad core happy. C1E is disabled to match the reference code. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: Ic6d4283d480a44d85a9b96571baf83928615665c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175743 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4952 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06regscript: Add support for MSR typeDuncan Laurie
This required changing value/mask types to uint64_t. Another option would be to use id field to select low or high 32 bits of the MSR and set them independently. BUG=chrome-os-partner:23505 BRANCH=none TEST=build and boot on rambi Change-Id: Ied9998058a8035bf3f003185236f3be3e0df7fc9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176304 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4951 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: include the EC devices normally on superioAaron Durbin
The superio.asl file allows for the mainboard to hang devices off of the LPC bus in ACPI. Include the keyboard controller, EC memory map, and host interface's resources. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted. Noted resource reservations in dmesg. Change-Id: Ida6481cd4c4725b5d3946bc64179ee99c93b0106 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176134 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4950 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: include mainboard's superio.aslAaron Durbin
The mainboard needs an opportunity to hang devices off of the LPC device. Therefore, provide this opportunity for the mainboard. BUG=chrome-os-partner:23505 BRANCH=None TEST=Buit and booted with keyboard. Keys work. Change-Id: Ie2b660ad43e86d9237b0b0bb0720b069670bc537 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176133 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4949 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: update EC supportAaron Durbin
Fix the SMI and SCI gpios for Rambi. Also, add in the EC callbacks for the SMI handler. Note that the handler for GPI SMIs has not been tested yet as baytrail chipset code doesn't yet support setting up those configurations yet. BUG=chrome-os-partner:23505 BRANCH=None TEST=Noted that SCI was enabled in /sys/firmware/acpi/interrupts for the EC's SCI GPI. Also was able to see Chrome EC messages with CONFIG_DEBUG_SMI and powering down at the dev screen. Change-Id: I67b278fd38e1c09271d2c1e16e42f6e8c49e3a70 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176077 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4948 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 19:41:29 +0000