| Age | Commit message (Collapse) | Author |
|---|
|
Setting up HT resource seems to be copied from the old native family10
code. It is however not used as no device has a child device below 18.0
in any of the fam15tn board device trees.
Setting up HT resources is therefore done by AGESA and resource
allocation mostly happens to work.
Change-Id: I7edf19f71095fb38161f19d511997cdc2fe0d76c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Setting up HT resource seems to be copied from the old native family10
code. It is however not used as no device has a child device below 18.0
in any of the fam15tn board device trees.
Setting up HT resources is therefore done by AGESA and resource
allocation mostly happens to work.
Change-Id: Id95e2dec4a6f3e70234fff1df67ee61e08731400
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68411
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The current SMBIOS for coreboot is missing processor info for Alder Lake and Raptor Lake SoC, specifically, voltage, max speed,
and upgrade (socket type). This patch implements upgrade function.
Refer to SMBIOS spec sheet for documentation on cpu socket values:
https://web.archive.org/web/20221012222420/https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf
BUG=NONE
BRANCH=firmware-brya-14505.B
TEST=Boot and verified that SMBIOS processor upgrade value is correct.
Signed-off-by: Zhixing Ma <zhixing.ma@intel.com>
Change-Id: I5796d31fa2d31b17afa5eddde0799b0f68d69909
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68024
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
X9SAE has a PS/2 controller for keyboard and mouse but its definition
in ACPI used to be missing, and X9SAE used to use a generic SuperIO
support initially generated by autoport, so the full NCT6776 support
is added here like x9scl.
Test result:
Log lines like
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
become
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
and more sub-devices within SuperIO is handled by the PNP driver.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: Ie5e73e8c3fc4e57c6683d7a7ca70e96c64dd9366
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This code is identical for all non-CAR AMD SoCs, so factor it out to
soc/amd/common/block/cpu/noncar/bootblock.c to avoid code duplication.
Also integrate the bootblock.c improvement to include cpu/cpu.h which
provides cpuid_eax from commit 68eb439d8091 ("soc/amd/picasso: Clean up
includes").
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I42e4aa85efd6312a3ab37f0323a35f6dd7acd8e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Rename soc/amd/common/block/cpu/smm/smi_ampc_helper.c to smi_apmc.c and
add the fch_apmc_smi_handler function.
Remove the duplicated function from picasso, cezanne, mendocino, and
morgana SoC.
The stoneyridge soc does not implement the APM_CNT_SMMINFO handler, so
give the handler a unique name that does not conflict with the common
handler name.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I2e6fb59a1ee15b075ee3bbb5f95debe884b66789
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68441
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: If68ce4fef69a2466e76fc7fc504c00ee915e3e36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid
name. Update hid name depending on the AUDIO_CODEC_SOURCE field of
fw_config. Define FW_CONFIG bits 41 - 43 (SSFC bits 9 - 11)
for codec selection.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:244620955
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Ia6cb56e76bc4e245a32f29b19226fa4fae330c92
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
|
|
Change-Id: I9b03ccc1100307e3c24393903600d18f6cc9abdc
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68378
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
|
|
Enable PMC in devicetree so that resources are allocated properly
for it.
Tested on StarLite Mk III & IV, and both can power on correctly.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ib4384b55751a9979e470dd04f6814d4ca170ff34
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67409
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reset the XHCI controller prior to S5 to avoid XHCI preventing shutdown.
Linux needs to put the XHCI into D3 before shutting down but the
powerstate commands do not perform a reset.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3be70443eb85a7dff8055c9de0ca2fd89f4fc88d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67678
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9377c3b65aa342f754c303148b0b8d826d05bb94
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67662
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure FSP S UPDs to allow coreboot to handle the lockdown.
The main change here is setting `Write Protection Support` to 0,
as the default is Enabled, which shouldn't allow writes (even though
it seems to).
The UPDs are identical on APL and GLK, but all ones configured
in this patch have been there since their initial releases.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1f6e5344cab2af7aa6001b9ec0f07b043a9caa8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaecb83c3bc9c75dab427a3ca54da1e6a8f87cf9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68428
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id3002dc976b82f71b1f60a6e32b16d60a7bbbead
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This AMD reference board is called Pademelon and not Padmelon, so fix
the name in coreboot. Also update the corresponding documentation.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id1c7331f5f3c34dc7ec4bc5a1f5fe3d12d503474
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I4ed869627af11b607f910644b6f21898f7c7bba5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68237
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Cezanne has two SATA controllers, but doesn't select
SOC_AMD_COMMON_BLOCK_SATA, so it's not added to the SATA devices in the
Cezanne chipset devicetree.
Change-Id: If7f0a9638151cf981d891464a2c3a0ec5fc9c780
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This removed the need to maintain a PCI driver.
Change-Id: I43def81d615749008fcc9de8734fa2aca752aa9d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68146
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This removes the need for a PCI driver.
Change-Id: I6674d13f434cfa27fa6514623ba305af6681f70d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This removes the need for a PCI driver.
Change-Id: Iab75f8c28a247f1370f4425e19cc215678bfa3e5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68140
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If5447f9272183f83bc422520ada93d3cfd96551e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Several EC host commands check for support of a given feature or msg
version, and a non-zero response does not necessarily indicate an actual
error. Since the caller is (should be) handling the non-zero response to
the host command, demote the EC printk from ERR to SPEW to clean up the
console log and prevent non-errors from causing false failures in
firmware tests.
BUG=b:238961053
Change-Id: Ib7afc0b7e5b571acb56252f7adb518a6b2716b62
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68259
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove the "_DEPRECATED_" tag from ChromeOS diagnostics event and add a
subtype: "ELOG_CROS_DIAGNOSTICS_LOGS" under it.
The data of "ELOG_CROS_DIAGNOSTICS_LOGS" (0x02) contains:
* An uint8_t of subtype code
* Any number of "ChromeOS diagnostics logs" events
Each "ChromeOS diagnostics log" represents the result of one ChromeOS
diagnostics test run. It is stored within an uint8_t raw[3]:
* [23:19] = ELOG_CROS_DIAG_TYPE_*
* [18:16] = ELOG_CROS_DIAG_RESULT_*
* [15:0] = Running time in seconds
Also add support for parsing this event. The parser will first calculate
the number of runs it contains, and try to parse the result one by one.
BUG=b:226551117
TEST=Build and boot google/tomato to OS,
localhost ~ # elogtool list
0 | 2022-09-26 04:25:32 | Log area cleared | 186
1 | 2022-09-26 04:25:50 | System boot | 0
2 | 2022-09-26 04:25:50 | Firmware vboot info | boot_mode=Manual recovery
| recovery_reason=0x2/0 (Recovery button pressed)
| fw_tried=A | fw_try_count=0 | fw_prev_tried=A
| fw_prev_result=Unknown
3 | 2022-09-26 04:25:50 | EC Event | Keyboard Recovery
4 | 2022-09-26 04:26:01 | Memory Cache Update | Normal | Success
5 | 2022-09-26 04:26:06 | System boot | 0
6 | 2022-09-26 04:26:07 | Firmware vboot info | boot_mode=Diagnostic
| fw_tried=A | fw_try_count=0 | fw_prev_tried=A
| fw_prev_result=Unknown
7 | 2022-09-26 04:26:07 | Diagnostics Mode | Diagnostics Logs
| type=Memory check (quick), result=Aborted, time=0m0s
| type=Memory check (full), result=Aborted, time=0m0s
| type=Storage self-test (extended), result=Aborted, time=0m1s
Change-Id: I02428cd21be2ed797eb7aab45f1ef1d782a9c047
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch creates helper header file (ufs.h) for UFS to keep
required registers details and ACPI device id for UFS.
BUG=none
TEST=Able to build and boot Google/Kano.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If08c54eb706876a4255542a708aa5fcd8bf43c55
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68299
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add UFS PID (`PID_UFSX2`) value 0x50.
BUG=none
TEST=Able to build and boot Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I229469475cd116bf911b6530c3c819d00c808aa9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68298
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add DEVAPC permission settings for ADSP and set its domain number to 6.
TEST=SOF driver is functional.
BUG=b:204229221
Change-Id: I37bfea70386af953e89f3c38ac51e41af6aafa6e
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68290
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To use SOF correctly, we need to initialize ADSP in coreboot stage.
TEST=SOF driver is functional.
BUG=b:204229221
Change-Id: I45db587252ccdcdf75e0be2029743034a79925c5
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68289
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To use SOF correctly, we need to enable power domain of ADSP.
TEST=SOF driver is functional.
BUG=b:204229221
Signed-off-by: Mandy Liu <mandyjh.liu@mediatek.com>
Change-Id: I39d1357af5f901a91379fdf7e595f16952b962de
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68288
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To use SOF correctly, we need to enable ADSP clock.
TEST=SOF driver is functional.
BUG=b:204229221
Signed-off-by: Mandy Liu <mandyjh.liu@mediatek.com>
Change-Id: Ia17db889829df2668cf2af1b71c6468230de68e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68287
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add initial fw config as per config.star.
BUG=b:253199788, b:245158908, b:244113761, b:244012065
TEST=emerge-rex coreboot. Make sure that ACPI tables are equivalent
before and after this change with CBI.FW_CONFIG set to 0x1561.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I66f8b3e4ab414c03b8d63fdd31e0f3f424619340
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68220
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:253199788
TEST=Build and boot to Google/Rex.
Change-Id: Ib729c98a4d67aa46992fdccf592010b0313605a6
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66817
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When fw_config is unprovisioned, devicetree will disable all probed
devices. However, boot-critical devices such as storage devices need to
be enabled.
As a temporary workaround while adding devicetree support for this,
remove the fw_config probe for storage devices so that all storage
devices are always enabled. On eMMC SKUs, UFS and ISH will be disabled
by the PCI scan anyway. On UFS SKUs, eMMC is not disabled by the PCI
scan, but keeping it enabled should have no functional impact, only a
possible power impact.
BUG=b:251055188
TEST=On yaviks eMMC and UFS SKUs, boot to OS and
`suspend_stress_test -c 10`
Change-Id: I6b3a20f3c14d5e9aa8d71f6ca436b5a682310797
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68365
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1.Change the TPM I2C freqeuncy to 1 MHz for xivu.
2.Config same settings as the baseboard for I2C buses 1-5.
BUG=b:249953477
TEST=On xivu, all timing requirements in the spec are met.
Frequencies:
1. I2C0 (TPM): 974.3 Khz
2. I2C1 (TouchScreen); 375.5 Khz
3. I2C3 （Audio): 389.0 Khz
4. I2C5 (Touchpad): 388.5 Khz
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I33f712c14978b95f3a4da82d6f1f5fbae1283b17
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
The current SMBIOS for coreboot is missing processor info for Alder Lake and Raptor Lake SoC, specifically, voltage, max speed,
and upgrade (socket type). This patch implements voltage function.
Refer to SMBIOS spec sheet for documentation:
https://web.archive.org/web/20221012222420/https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf
BUG=NONE
BRANCH=firmware-brya-14505.B
TEST=Boot and verified that SMBIOS processor voltage value is correct.
Signed-off-by: Zhixing Ma <zhixing.ma@intel.com>
Change-Id: I77712b72fa47bdcb56ffddeff15cff9f3b3bbe86
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68023
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The current SMBIOS for coreboot is missing processor info for Alder Lake
and Raptor Lake SoC, specifically, voltage, max speed,
and upgrade (socket type). This patch implements max speed function.
Refer to SMBIOS spec sheet for documentation:
https://web.archive.org/web/20221012222420/https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf
BUG=NONE
BRANCH=firmware-brya-14505.B
TEST=Boot and verified that SMBIOS max speed value is correct.
Signed-off-by: Zhixing Ma <zhixing.ma@intel.com>
Change-Id: I09bcccc6f97238f7328224af8b852751114896fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67913
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PCIe port descriptor list seems to be specific to Merlin Falcon and
Prairie Falcon has a different PCIe root port configuration. Since I
neither have the board nor the different APUs, I just add a comment
about this instead of trying to come up with a PCIe port descriptor list
that may or may not work properly on Prairie Falcon APUs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8e1eb67a8f684297bbefc6e2593250d7bd45593f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The northbridge ops should be added to the actual northbridge and not
the first HT device. Neither of the devices has BARs on it, so
read_resources implementation will still work correctly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2e5f21bfe5fff043d7d9afafa360764203dd61f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68409
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Stoneyridge is a SoC so it makes sense to statically use ops instead of
matching them to PCI DID/VID at runtime. In contrast to the other AMD
SoCs in the coreboot tree the PC driver used the PCI ID of the first HT
PCI device function, so add the ops to the device 0x18 function 0
devicetree entry in this patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I500521701479aa271ebd61e22a1494c8bfaf87fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68408
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This removes the need for a lot of boilerplate code in the soc code to
hook up device_operations to devices.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id668587e1b747c28207b213b985204b7a961a631
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68410
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Ibb7aac1204bc297d16797cac5b32b119d0a9204b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68224
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
1. Add CHROMEOS_WIFI_SAR to include the SAR configs.
2. Add get_wifi_sar_cbfs_file_name() that return the wifi SAR
filename.
BUG=none
TEST=emerge-rex coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia863eaa53c9456ae0e9f0e8914e0de497a32b53b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68393
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Disable the unused PCIe root ports that are disabled in the PCIe port
corresponding descriptor list passed to AGESA/binaryPI. This descriptor
list is in src/mainboard/google/kahlee/variants/baseboard/OemCustomize.c
and it only has B0D2F2 (gpp_bridge_1) and B0D2F4 (gpp_bridge_3) enabled.
Since the PCIe engines marked as unused in the port descriptor list
won't show up as PCI devices, don't enable those PCI devices in the
devicetree so that coreboot won't complain about static PCI devices not
being found on the PCI bus.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If8378e343a2eb13de66171cf4f38d77ae3401016
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68382
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I63b1053d36b284ed95b015c0b4b26bdf8e162e67
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68381
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I509daac75c80bdca808706f783b04843209cc313
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68380
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The board's PCIe port descriptors have the PCIe engine disabled, so
update the devicetree accordingly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic97a54c3cc762a36752d6b9f21467428912a9edd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68379
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9a429c0fd23eb3b52a19a974b22079d675e3506a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68318
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since commit 60e9114c6210 ("include/device: ensure valid link/bus is
passed to mp_cpu_bus_init"), no dummy LAPIC device is required under the
CPU cluster device. Since the CPU cluster device is already present in
the Stoneyridge chipset devicetree, drop the whole CPU cluster part from
the mainboard's devicetrees.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8918c14be25ac9756926a9c6a2806a3dceced42a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68317
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add chipset devicetrees for Stoneyridge and Carrizo, which is also
supported by the Stoneyridge code, but has more external PCIe ports and
devices. The mainboard's devicetrees will be changed to use the aliases
defined in the chipset devicetree in follow-up patches. This is a
preparation to statically assign the ops for the internal devices
statically in the SoC devicetree instead of dynamically adding them in
ramstage.
BKDG #55072 Rev 3.04 was used to check the PCI devices and functions and
the MMIO addresses.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia45260b1168ed1d99993adfb98475da5b5c90d11
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68316
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When using a Merlin Falcon APU, explicitly enable the PCIe root port at
B0D3F1. B0D3F0 is only a dummy PCI device function, but needs to also be
enabled in order for the actually used function to be usable. Prairie
Falcon doesn't have and PCI device 3 on bus 0, so remove D3F0 from the
common mainboard devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I01f9b9ac2a9ebd5899a093d97eb5b2d76d309f66
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68315
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the correct PCIe root ports in the devicetree so that the
configuration matches the PCIe port descriptors in
src/mainboard/amd/padmelon/bootblock/OemCustomize.c.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idb00a65adcf2059d7432a8df08654bb0ba965e24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68314
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PCI devices that aren't present in the devicetree will be treated as
enabled. Since the chipset devicetree that will be added in a follow-up
patch disables this device by default, explicitly enable the IOMMU
device on the Stoneyridge mainboards that don't disable it to keep the
same behavior.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4a2cdd00abe8309244829dc633dd8a9ca0038dfa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68313
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the devicetree files are passed to util/sconfig without being
processed by the C preprocessor, using #if in the devicetree won't give
the behavior that might be expected. Instead sconfig treats the #if as a
comment, but still processes all other lines. To get the intended
behavior, replace the C preprocessor usage in the devicetree by moving
the APU-specific parts to override devicetrees that get selected
according to the selected APU type.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iddd317b27a838849fa40c0fb77d942609104cf04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68312
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PCIEXP_HOTPLUG_PREFETCH_MEM_BELOW_4G is no longer needed so remove it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I82841c2114ceb5e7a46ce228fce63d24822098d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68084
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This removes the need for a PCI driver.
Change-Id: I4b499013a80f5c1bd6ac265a5ae8e635598d9e6c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This removes the need for a PCI driver.
Change-Id: I8e235d25622d0bd3f1bb3f18ec0400a02f674a6d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This removes the need for a PCI driver.
Change-Id: Id25016703d1716930d9b6c6d1dab5481b10aca17
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68145
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Morgana is a SoC so it makes sense to statically use ops instead of
matching them to PCI DID/VID at runtime.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I67362ae4a32bc9b1dd19ee5e4caf42db8f5dd1bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68311
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Mendocino is a SoC so it makes sense to statically use ops instead of
matching them to PCI DID/VID at runtime.
Change-Id: I5619c8ad42cdeb019cb7294da884909df64a2211
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Cezanne is a SoC so it makes sense to statically use ops instead of
matching them to PCI DID/VID at runtime.
Change-Id: If535221335217cee53bca956747e7f17f0a5fd8d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Picasso is a SoC so it makes sense to statically use ops instead of
matching them to PCI DID/VID at runtime.
Change-Id: Ide747c9d386731af89b27630b200676c6e439910
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67743
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This removes the need for a lot of boilerplate code in the soc code to
hook up device_operations to devices.
Change-Id: I2afc1855407910f1faa9bdd4e9416dd46474658e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This allows for reduced use of chip_operations in the followup patch and
allows the allocator to skip over the used mmio.
Change-Id: I4052438185e7861792733b96a1298201c73fc3ff
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I80f3d2c90c58daa62651f6fd635c043b1ce38b84
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Switch from gpio_configure_pads() to gpio_configure_pads_with_override()
so variants can override romstage GPIO defaults. Rename baseboard
function and add an weak empty override function to be used by variants.
Will be used for touchscreen power sequencing in a follow-on commit.
Change-Id: I45586237919cd07a171beac57f3510e26338f67f
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Create the zombie variant of the herobrine reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:249180463
BRANCH=None
TEST=util/abuild/abuild -p none -t google/herobrine -x -a
make sure the build includes GOOGLE_ZOMBIE
Signed-off-by: Maulik Vaghela <maulikvaghela@google.com>
Change-Id: Ifecf0a6323b20012defbf14bd16ce2f1f41f4714
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
The psp_verstage/svc.h SVC_CALLx macros are virtually
identical between picasso/cezanne/mendocino, so move
to common.
TEST=timeless builds are identical
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I86a8d9b043f68c01ee487f2cdbf7f61934b4a520
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This change updates scl_lcnt, scl_hcnt, sda_hold value for I2C5.
BUG=b:249031186
BRANCH=brya
TEST=TP function is normal from EE check.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I5e756b7d7e14cace24ef2dfbb323c840c867ae1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Change-Id: I2473fe61b299d1c6221844cd744791b8012c5c67
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
HP Z220 series has PCI slot(s) but Interrupt Routing Table in ACPI
used to be missing, so one is added.
Note that the values within the added one are obtained from my own SFF
variant. If other variants have different values, please add them in a
manner similar to mb/gigabyte/ga-b75m-d3h/acpi/pci.asl.
Test result:
Log lines like
pci 0000:00:1e.0: can't derive routing for PCI INT A
ath9k 0000:04:00.0: PCI INT A: no GSI
disappeared from dmesg.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I8522b25ac46db2054302c8f2418927c722b157e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68334
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I66f99a5afbdd2b847a916a470a5def9a6d3999bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68335
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Strings in C are highly cursed. Use `snprintf()` to minimize the
potential of running into undefined behavior in the future.
Change-Id: I3caef25bc7676ac84bb1c40efe6d16f50f8f4d26
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68323
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The `eeprom_read_serial()` function could return a non-NULL terminated
string if the serial in EEPROM has `HERMES_SN_PN_LENGTH` (32) non-NULL
characters. Make this impossible by adding an additional character for
a NULL byte in the static buffer, which always gets set to 0 (NULL).
Change-Id: I306fe1b6dd3836156afca786e352d2a7dca0d77c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68322
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This patch drops unused ADL-N UFS PCI Device ID macro
`PCI_DID_INTEL_ADP_UFS`.
BUG=none
TEST=Able to build and boot Google/Kano.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I24e4a1a871763473df4d610b13e8a3a754470233
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Correct UART source clock value in comment from 120 MHz to 100 MHz.
BUG=b:249530903
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ifc17357051ae0b3bc663da467b4fc809a46024d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68286
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 4b5ba9436373d1addab13cd38ee6899e49ea029f.
Reason for revert: This optimization is causing the non-serial enabled
tot BIOS to not boot. To get tot back into good shape, will revert
for now and reevalute this fix and resubmit at a later time.
BUG=b:218406702
BRANCH=None
TEST=reboot from AP console (on herobrine) after flashing
image-herobrine.bin.
prior to fix the device would never boot to login prompt.
after rever the device would boot to login prompt again.
Change-Id: Iaac5f2fb2120f6aa41a0ce9a763d50fd7b9a3ec7
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
|
|
The decompression is critical for speed of boot. So we sacrifice some
generated code size to optimize for speed.
This change speeds up the LZMA decompression between 3% and 6% at a
cost of just over 2k of additional code space.
BUG=b:223985641
TEST=Majolica
The test is done on Majolica and the result is listed below.
Time saved:
We tested the boot time with each flag for 10 times. The duration of
each decompression process is listed as below.
Load FSP-M Load ramstage Load payload
Ofast Os Ofast Os Ofast Os
------------------------------------------
62543 62959 20585 22458 9945 10626
62548 62967 20587 22461 9951 10637
62560 62980 20588 22478 9951 10641
62561 62988 20596 22478 9954 10643
62569 62993 20596 22479 9954 10643
62574 63000 20605 22492 9958 10647
62575 63026 20615 22495 9959 10647
62576 63038 20743 22614 9960 10647
62587 63044 20758 22625 9961 10647
62592 63045 20769 22637 9961 10647
-----------------------------------------
average 62568 63004 20644 22521 9955 10642
(unit: microseconds)
Size sacrificed:
The size of object file with -Os:
./build/ramstage/lib/lzmadecode.o: file format elf32-i386
4 .text.LzmaDecode 00000d84 00000000 00000000 00000076 2**0
CONTENTS, ALLOC, LOAD, READONLY, CODE
The size of object file with -Ofast:
./build/ramstage/lib/lzmadecode.o: file format elf32-i386
4 .text.LzmaDecode 00001719 00000000 00000000 00000080 2**4
CONTENTS, ALLOC, LOAD, READONLY, CODE
(Output by running "objdump -h ./build/ramstage/lib/lzmadecode.o")
We can see that size is increased from 3460 bytes to 5913 bytes, a
change of 2453 bytes or 171%.
Change-Id: Ie003164e2e93ba8ed3ccd207f3af31c6acf1c5e2
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66392
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Configure PMC mux in devicetree.
Tested on StarBook Mk V with Ubuntu 22.04.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I297d5446e43357d97357f345668cf40dcd28502d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68083
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Enable the P2SB so that the SPI is discoverable by the OS.
Change-Id: I49802f93a97a18ecc10f48d213619855728e1290
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67029
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie9655406c7afe7a22f131d35633a697c5bbde4e3
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ic48c5c165732c8397c06a2362191a94ae5805cf1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68276
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I7ddb4ea792b9a2153b7c77d2978d9e1c4544535d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68275
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I040ddab8845cc2191c6ca5af7f132ec8a504bccf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I05d5097097b925a7bc8058f4c23e7c13a49f03c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I581cacb6086d94fe65e6f4800454f447e1ada07b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Id4e2939b74ec93f50a4bedd0069090f0775b0556
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I4e468e6bb58adc44bd66149eb79dc885dbf73c67
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I1e51ccad32f1c5e692c76b331eedf4d3bb260d38
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Function 'setbits16' performs an 'OR' operation with the new data and
the origin register entry. This can lead to an incorrect value in the
register which can then lead to issues.
Change-Id: I0212420be770e2ffdabebbfaf5dfbf8d99d25915
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Makes it possible to configure the maximum allowed/supported DDR memory
frequency on a per mainboard basis.
Test
- Define maximum memory frequency in mainboard devicetree.cb
- Boot into Linux and run 'sudo dmidecode --type 17' to check memory
speed
- Boot into Linux and run 'phoronix-test-suite benchmark ramspeed'
Change-Id: I9e0c7225e2141e675a20b8e3f0dbe8c0b3a29b28
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68097
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I8ea6e773d858b30d75ff93d4fe07301f3825c1cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68240
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Selecting *Output verbose RAM init debug messages*
(`CONFIG_DEBUG_RAM_SETUP=y`) the build fails due to the missing header.
CC romstage/northbridge/intel/i945/raminit.o
src/northbridge/intel/i945/raminit.c: In function 'ram_read32':
src/northbridge/intel/i945/raminit.c:77:39: error: expected ')' before 'PRIxPTR'
77 | PRINTK_DEBUG(" RAM read: %" PRIxPTR "\n", offset);
| ^~~~~~~
src/northbridge/intel/i945/raminit.c:25:52: note: in definition of macro 'PRINTK_DEBUG'
25 | #define PRINTK_DEBUG(x...) printk(BIOS_DEBUG, x)
| ^
src/northbridge/intel/i945/raminit.c:22:1: note: 'PRIxPTR' is defined in header '<inttypes.h>'; did you forget to '#include <inttypes.h>'?
21 | #include "chip.h"
+++ |+#include <inttypes.h>
22 |
src/northbridge/intel/i945/raminit.c:25:39: note: to match this '('
25 | #define PRINTK_DEBUG(x...) printk(BIOS_DEBUG, x)
| ^
src/northbridge/intel/i945/raminit.c:77:9: note: in expansion of macro 'PRINTK_DEBUG'
77 | PRINTK_DEBUG(" RAM read: %" PRIxPTR "\n", offset);
| ^~~~~~~~~~~~
src/northbridge/intel/i945/raminit.c:77:22: error: spurious trailing '%' in format [-Werror=format=]
77 | PRINTK_DEBUG(" RAM read: %" PRIxPTR "\n", offset);
| ^~~~~~~~~~~~~~~~
src/northbridge/intel/i945/raminit.c:25:52: note: in definition of macro 'PRINTK_DEBUG'
25 | #define PRINTK_DEBUG(x...) printk(BIOS_DEBUG, x)
| ^
src/northbridge/intel/i945/raminit.c:77:36: note: format string is defined here
77 | PRINTK_DEBUG(" RAM read: %" PRIxPTR "\n", offset);
| ^
Include `inttypes.h` to fix it.
Fixes: e8bb6d2b16ac ("Output verbose RAM init debug messages")
Change-Id: If3851ec899d4c7ce5fd64542827f9e0eb546d68b
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68265
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
config.h is a dependency so add it.
Change-Id: Iac87039dd43aa75d49766b9a239fbd841ca6850c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68244
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Fixes brightness controls on Windows 10.
Change-Id: I33ac1b5a17c95dbb1b166c38fcd639cdac439724
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67636
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Windows hardware tests require this field not be "Reserved".
The System76 EC firmware does not report the wake type, so it is not
possible to know if the system was powered on from the power switch or
Wake-on-LAN. In the case WoL is used, this will report the wrong value.
Change-Id: I4653c6bce2a5f0a88281fc810df5646e44f90674
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2da15db3d7fba4396c74800e531476c108cafe17
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67421
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable SRAM in devicetree so that resources are allocated properly
for it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1d7ee4f950b31f2be6fb7bd107b5fe54785ed81a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67420
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the P2SB so that the SPI is discoverable by the OS.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ied7a6ea706e6da86182c109ab4813fa3fcebb1f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67419
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BRANCH=none
BUG=b:234776154
TEST=build and boot Nirwen UFS, copy ISH firmware to host
file system /lib/firmware/intel/adln_ish.bin
check "dmesg |grep ish", it should show:
ish-loader: ISH firmware intel/adlnrvp_ish.bin loaded
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I89782b0b7dde1fca0130472a38628e72dfd5c26c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
First of all, make sure that `get_board_settings()` never returns NULL.
If there's a problem, return predefined values for board settings.
If the board settings definition differs between coreboot and the BMC,
the CRC will not match. Allow coreboot to use the BMC settings provided
by older BMC firmware revisions which have less settings, if the CRC of
the first N bytes matches the expected CRC.
TEST=Boot coreboot master with BMC FW R04.05, observe board settings
being honored even though coreboot's definition has an extra option.
Change-Id: I0f009b21ef0850a2af6edef1818c770171358314
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67381
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
