aboutsummaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2021-04-05mb/google/dedede/var/sasuke: Update DPTF parametersSeunghwan Kim
Remove TSR2, use DPTF parameters from internal thermal team. BUG=b:183749595 BRANCH=dedede TEST=emerge-dedede coreboot Change-Id: I3182b96bf36c8d07299fe435a29e6b8c0b8a6927 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-04-05mb/google/dedede/var/sasuke: Configure I2C times for touchpad/audioSeunghwan Kim
Configure I2C rise/fall time in device tree to ensure I2C CLK runs accurately at I2C_SPEED_FAST (< 400 kHz). Measured I2C frequency just as below after tuning: I2C0(touchpad): 385 kHz I2C4(audio): 380 kHz BUG=b:180335053 BRANCH=dedede TEST=Build and check after tuning I2C clock is under 400kHz Change-Id: Ic92ee0379456e80260a8026bc38ee41325dad6d2 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-04-05soc/amd/common/espi: Clear DNCMD_COMPLETE on completionRaul E Rangel
Tidy up the interrupt status. This will leave SLAVE0_INT_STS = 0. BUG=b:183524609 TEST=Boot guybrush to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I950cfb81521e35758c120a482670cfdb924201d2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52056 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-05soc/amd/common/espi: Reset eSPI registers to known stateRaul E Rangel
This sets the eSPI registers to the reset values specified in the PPR. On Cezanne, the PSP modifies these registers such that the eSPI peripheral cannot send DEFER packets. This causes random bus errors. These reset values are identical to what is currently used on Zork. I didn't clear out ESPI_DECODE because it's currently being done by cb:51749. BUG=b:183524609 TEST=Boot guybrush to the OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic3a9860747aac78121358b4499d8a38052236c0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/52058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-04-05soc/amd/common/espi: Add missing eSPI register definitionsRaul E Rangel
These are defined in the public Picasso PPR - 55570-B1 Rev 3.15. BUG=b:183524609 TEST=Build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I7e601f767327e0a24a086146623af039388b2e7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/52057 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-05mb/google/dedede: add lalala variantAaron Durbin
The Lalala variant is a design that differs only in replacing Cr50 with a discrete TPM part. BUG=b:184151664 Change-Id: I2f7abb9637cd5a13ac896396781b19feb156c948 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aseda Aboagye <aaboagye@google.com>
2021-04-05mb/google/dedede: add discrete TPM 2.0 configurationAaron Durbin
There are forthcoming designs that will be utilizing a discrete TPM 2.0 solution. Split the existing dedede configuration options so future mainboard variants can easily select the appropriate Kconfig option using the newly introduced options: - BOARD_GOOGLE_BASEBOARD_DEDEDE_CR50 - BOARD_GOOGLE_BASEBOARD_DEDEDE_TPM2 The existing variants all select the former option, BOARD_GOOGLE_BASEBOARD_DEDEDE_CR50 since all those designs currently utilize Cr50. BUG=b:184151664 Change-Id: I2bdb1ca4fd78cc0628256d49678ea042c55f6fba Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52030 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aseda Aboagye <aaboagye@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-05mb/google/brya: Enable south XHCI ports 1 and 2Furquan Shaikh
FSP v2081 has a bug where it uses the information about south XHCI ports to enable TCSS XHCI ports. This change works around this bug by enabling south XHCI ports 1 and 2 in brya baseboard devicetree. brya0 already enables south XHCI port 1 in overridetree.cb, however, it is still enabled in baseboard/devicetree in case more variants are added to brya before FSP is fixed. BUG=b:184324979 TEST=Verified that TCSS XHCI ports 1 and 2 are now enabled. Change-Id: I4b86a98b18234ba309ddf2f30b80d78472951637 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-04-05nb/intel/sandybridge: Drop `pci_mmio_size`Angel Pons
There's no good reason to use values smaller than 2 GiB here. Well, it increases available DRAM in 32-bit space. However, as this is a 64-bit platform, it's highly unlikely that 32-bit limitations would cause any issues anymore. It's more likely to have the allocator give up because memory-mapped resources in 32-bit space don't fit within the specified MMIO size, which can easily occur when using a discrete graphics card. Change-Id: If585b6044f58b1e5397457f3bfa906aafc7f9297 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52072 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-05sandybridge boards: Drop default `pci_mmio_size`Angel Pons
2 GiB is the default already. Change-Id: I294460949659c97d4e19ad4e9d14f8c3566cca3f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52071 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-05nb/intel/ironlake: Drop `pci_mmio_size`Angel Pons
There's no good reason to use values smaller than 2 GiB here. Well, it increases available DRAM in 32-bit space. However, as this is a 64-bit platform, it's highly unlikely that 32-bit limitations would cause any issues anymore. It's more likely to have the allocator give up because memory-mapped resources in 32-bit space don't fit within the specified MMIO size, which can easily occur when using a discrete graphics card. Change-Id: I6cdce5f56bc94cca7065ee3e38af60d1de66e45c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52070 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-05device/dram/ddr3: Drop unused MRS helpersAngel Pons
These aren't used anywhere anymore. Change-Id: I4cf2fc0d07a772886e90fba4f66591a7b0a40e6c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-05nb/intel/sandybridge: Rename `pdwm_mode` enumAngel Pons
The `pdwm` part was supposed to be an abbreviation of `power down`, but it is neither self-explanatory nor properly-spelled. Rename the enum. Change-Id: I7b83c71d4534b62e18ced04eebe6a65089e1d874 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-05spd.h: Remove unused definitionsAngel Pons
These definitions are unused and not particularly useful. Drop them. Change-Id: I40a824888701870b6713c1a16ab671c19b3770ae Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51900 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-05nb/intel/i945/raminit.c: Replace `DIMM0`Angel Pons
Use the actual value as it is more informative. Change-Id: Id3bd8ccdf79d1e3fdf97cda049f81271bb017ef7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52073 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-05nb/intel/i945: Refactor `dump_spd_registers` functionAngel Pons
Use the mainboard-provided SPD map and skip unused addresses. Change-Id: I2b5b71cff290343c1000d5613209049fa9724e3d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-05device/dram/ddr4.h: Align with DDR3 and DDR2Angel Pons
Drop unnecessary typedefs and rename DDR4-specific definitions to avoid name clashes, as done for DDR3 in earlier commits. This allows including and using both DDR3 and DDR4 headers in the same compilation unit. Change-Id: I17f1cd88f83251ec23e9783a617f4d2ed41b07f0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51898 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-05include/spd_ddr2.h: Remove unused and redundant fileAngel Pons
DDR2-related definitions exist in `device/dram/ddr2` already. Change-Id: I509f728138327d8a0a88e4503235f05bf14aed20 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51897 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-05device/dram/ddr3: Rename DDR3 SPD memory typesAngel Pons
To avoid name clashes with definitions for other DRAM generations, rename the enum type and values to contain `ddr3` or `DDR3`. Change-Id: If3710149ba94b94ed14f03e32f5e1533b4bc25c8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51896 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-05device/dram/ddr3: Get rid of useless typedefsAngel Pons
These typedefs are not necessary. Remove them, and rename some elements to avoid any confusion with other DRAM generations, such as DDR4. Change-Id: Ibe40f33372358262c540e371f7866b06a4ac842a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51895 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-05soc/amd/common/espi: Add ESPI_ prefix to SLAVE0_INT_ENRaul E Rangel
This matches the other register definitions. BUG=b:183524609 TEST=Build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I0ed92add633f294f92c6a0dde32851d01b10db3c Reviewed-on: https://review.coreboot.org/c/coreboot/+/52055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-04-05soc/amd/cezanne: Clear eSPI ranges before configuring eSPIMartin Roth
The Cezanne PSP configures the eSPI with the assumption that it's a majolica, setting up both the serial port and the majolica EC IO decode ranges. Since guybrush is NOT a majolica, this doesn't work very well there. Clearing the decode ranges allows the guybrush platform to set the decode ranges needed for its EC. BUG=b:183524609 TEST=Set up eSPI on Guybrush Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I77cfb948cb9ae6d1cf001bd9e66cede8d93f50b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-04-05soc/amd/common: Add func to clear eSPI IO & memory decode rangesMartin Roth
Previously, the eSPI code would only add to existing decode ranges, and there wasn't any way to clear ranges. This clears all the ranges so the eSPI configuration can start fresh. BUG=b:183207262, b:183974365 TEST=Verify on Guybrush Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ic4e67c40d34915505bdd5b431a064d2c7b6bbc70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51748 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-04-04soc/ti/am335x/mmc.c: Fix memset length argumentAngel Pons
The sizeof() operator was being applied to a pointer-to-struct type. Correct this, so that the entire struct space gets cleared. Change-Id: Ieab3aaa2d07a928f27004b94132377d5dae935c0 Found-by: Coverity CID 1451732 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52054 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Sam Lewis <sam.vr.lewis@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-02coreboot_tables: Print strapping IDs when adding them to coreboot tableJulius Werner
These used to be printed before CB:46605. Having them in the logs can be a huge timesaver when debugging logs sent to you by other people (especially from systems that don't boot all the way). Let's add them back. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ifdbfdd29d25a0937c27113ace776f7aec231a57d Reviewed-on: https://review.coreboot.org/c/coreboot/+/52011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-04-02mb/google/zork/vilboz: Fix audio test failure on LTE SKUJohn Su
Use board id to switch acp_i2s_use_external_48mhz_osc enable. BUG=b:181720406 BRANCH=firmware-zork-13434.B TEST=emerge-zork coreboot chromeos-bootimage Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I085c39accd82bf72e4ebbc0394382ed4a7d4e901 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-04-02mb/intel/adlrvp: Update VBT filenamesTim Wawrzynczak
These files were just renamed to put `adlrvp` in between `vbt` and the memory technology type. Change-Id: Icefbac462d0ec9c660541e9cf44686d6dcf82dfd Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52032 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: YH Lin <yueherngl@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-02mb/google/guybrush: Enable early EC Software SyncKarthikeyan Ramasubramanian
BUG=None TEST=Build and boot to OS in Guybrush. Ensure that the EC Software Sync is complete. Change-Id: Id8655b6f805e14ce3cb71777c1cc175f45841fcc Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-02soc/amd/cezanne: Add support to perform early EC syncKarthikeyan Ramasubramanian
Ideally we would like to perform EC Software Sync in payload. But with the hardware requirement (EC_IN_RW) and firmware requirement (TPM command to get EC execution environment) not met yet, adding the support to perform early EC Software sync. With EFS2 enabled, this will also help cr50 to set the boot mode as NORMAL instead of NO_BOOT. BUG=None TEST=Build and Boot to OS in Guybrush. Ensure that the EC software sync is successfully complete. CBFS: Found 'ecrw.hash' @0x50400 size 0x20 in mcache @0x020171ec VB2:check_ec_hash() Hexp RW(active): 2dd8dbb78d0c626358a626037973a3d81982f88f3f38e7f759039bf84e05ccc6 VB2:check_ec_hash() Hmir: 2dd8dbb78d0c626358a626037973a3d81982f88f3f38e7f759039bf84e05ccc6 <snip> VB2:check_ec_hash() Heff RW(active): 2dd8dbb78d0c626358a626037973a3d81982f88f3f38e7f759039bf84e05ccc6 VB2:sync_ec() select_rw=RW(active) Change-Id: I820e651c6b22a833fef6f17a4ceb5a8cfb6f1616 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-02mb/google/guybrush: Add Elan Touchpad configurationKarthikeyan Ramasubramanian
Enable Touchpad by configuring the enable GPIO to logic high. Add touchpad configuration for ELAN touchpad. BUG=b:182207444 TEST=Build and boot to OS in Guybrush. Ensure that the trackpad events are detected using evtest. Change-Id: Ib47fbb33f2b181eb85f6ded98a5b0ce08fbc7b64 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51962 Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-02mainboard/google/brya: Disable touchpad as S3 wake sourceBoris Mittelberg
This change disables touchpad interrupt, as it sends spurious wake signal via GPP_F14 and immediately wakes the system from S3. It happens because touchpad's power is gated by deassertion of PLTRST#. The behaviour for S0ix is unchanged. BUG=183738135 TEST=manually Signed-off-by: Boris Mittelberg <bmbm@google.com> Change-Id: Ia7d282f38d205a94cc43eaa1832729f4606437c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51831 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-02mainboard/google/brya: Enable tight timestampBoris Mittelberg
This change exposes the PCH_INT_ODL line in GPP_F17 as interrupt resource for CREC device BUG=none TEST=manual test Signed-off-by: Boris Mittelberg <bmbm@google.com> Change-Id: I0c05160cb7894b5f7beee93a0c93776f973eae56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-04-02mb/google/brya: change reset signal for GPP_F17 from PLTRST to DEEPBoris Mittelberg
PCH_INT_ODL (GPP_F17) is used to wake AP from S3, however it was configured to reset state on PLT reset assertion. This change reconfigures the pad using DEEP instead of PLTRST to retain pad configuration across S3. BUG=b:178545523 TEST=manual: verified that asserting PCH_INT_ODL wakes system and the wake source is GPP_F17 Signed-off-by: Boris Mittelberg <bmbm@google.com> Change-Id: I8df5dafedabc7b6af74c39621f0e1eb7019a9a17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-04-02nb/intel/pineview: Correct COMP register writeAngel Pons
Reference code does an and-or operation with zero as or-value, reading and writing to the same address. The accessed register is 32-bit, and reference code programs bits 22, 21, 20, 16 to zero. However, coreboot code reads the value from bits 7..0 instead. Correct this. Change-Id: I33bf268449c2f799321be81a02bbccff855ee1fe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51861 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-02mb/hp/snb_ivb_laptops: Remove undefined variable in cmos.defaultBill XIE
There is no "volume" defined in cmos.layout now, so removing "volume=" from cmos.default, otherwise building will fail with CONFIG_USE_OPTION_TABLE set. Change-Id: I1d6bb68fb927882ddcc052b432bb34b42c58eac7 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Iru Cai (vimacs) <mytbk920423@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-01google/trogdor: Don't build for rev0 by defaultJulius Werner
We've mostly stopped using Trogdor-rev0 now and are starting to bring up rev2 instead. Therefore, the default revisions this builds for should be the newer ones. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ie433ebb2a03fb1636b5012b4a0567ba6f982579d Reviewed-on: https://review.coreboot.org/c/coreboot/+/52007 Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-01google/grunt: Add ALC5682 ACPI I2S machine driverKevin Chiu
The is used for AMD Grunt board which uses ALC5682 and MAX98357 codec. kernel driver will need to retrieve MISC FCH memory resource for CLK enabling per different CID/HID. BUG=b:171755306 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I5f29a2d784a9fc749fff61a9c96c0a487b71a2d7 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51659 Reviewed-by: Yu-hsuan Hsu <yuhsuan@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-01mb/google/dedede/var/lantis: Configure Acoustic noise mitigation UPDsTony Huang
Enable Acoustic noise mitigation for lantis and set slew rate to 1/4 which is calibrated value for the board. Other values like PreWake, Rampup and RampDown are 0 by default. BUG=b:183561593 BRANCH=dedede TEST=EE verify acoustic noise test passes. Change-Id: I5e5f24ed934910726c220678068d085b6ee2bcf6 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51762 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-01mb/google/guybrush: Add IRQ numbersRaul E Rangel
BUG=b:183737011 TEST=cat /proc/interrupts and see i2c controllers and gpio controller listed Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5b2f23b2c2a7c4cec198276814d80f545e85aa41 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-04-01soc/amd/cezanne: Enable GENERIC_GPIO_LIBRaul E Rangel
Needed so we write the correct resource into the ACPI tables. BUG=b:183737011 TEST=Boot OS and see GPIO devices working Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I2ba4349e0ed500912db40aa6ef9b649046f4358f Reviewed-on: https://review.coreboot.org/c/coreboot/+/51961 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-01soc/amd/cezanne: Add device tree support for I2CRaul E Rangel
This allows the cr50 on guybrush to show up in ACPI. BUG=b:183737011 TEST=Boot OS and see I2C devices initialized Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ifb5679b7bbefbf753217981874bb1bdaef35f6db Reviewed-on: https://review.coreboot.org/c/coreboot/+/51958 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-31mb/google/guybrush: Enable VBOOT_LID_SWITCHRaul E Rangel
Needed so get_lid_switch will actually call the EC. Otherwise it returns -1. BUG=b:183524609 TEST=Depthcharge no longer halts complaining that coreboot didn't sample the pin Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I4639b3713d726192e251dcffa14381dd92518fa2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2021-03-31mb/google/guybrush: Switch eSPI to 16 MHzRaul E Rangel
It looks like we are having SI issues on eSPI at 33 MHz. Switching to 16 MHz makes everything a lot more stable. BUG=b:183524609 TEST=Boot to OS and run `ectool version` 1000 times and see no problems. Before with 33 MHz there was an error every few cycles. declare -i i=0; while ectool version; do i+=1; echo "$i"; sleep .11; done; echo "Finished: $i" Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I6ab515629703a157c1d1ac6adcf5cf379e80f8ee Reviewed-on: https://review.coreboot.org/c/coreboot/+/51953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-03-31soc/amd/common/block/graphics: Don't add VBIOS to cbmem when using GOPRaul E Rangel
pci_rom_ssdt reloads the oprom from cbfs. It then places it into cbmem and writes the offsets as the ROM ACPI node. The GOP driver modifies the VBIOS so we don't want to reread from cbfs. When using GOP we also pass the offsets with the VFCT table. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iaf53e750564f1f0e115cd354790da62e672d74b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2021-03-31soc/amd/picasso/acpi: pass correct enum to acpigen_write_CSD_packageFelix Held
The coordtype parameter of acpigen_write_CSD_package expects a CSD_coord enum value, but HW_ALL that got passed as parameter is a PSD_coord enum value, so replace that with the correct CSD_HW_ALL enum value. TEST=Timeless build results in identical binary for Mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Found-by: Paul Menzel <pmenzel@molgen.mpg.de> Change-Id: I90b19345b8dc6d386b6acfa81c6c072dcd6981ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/51931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-03-31mb/google/zork/vilboz: set the eDP phy overriden for WWAN SKUChris Wang
Move the eDP phy overridden to variant for WWAN SKU. BUG=b:171269338 BRANCH=firmware-zork-13434.B TEST=emerge-zork coreboot chromeos-bootimage Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I0400e8f78b152f260c632fba3cfa43aeca2f6776 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-03-31mb/ti/beaglebone: Fix MMAP_HELPER API usageNico Huber
This replays the changes made in commit 9b1f3cc6fb (cbfs: Pull handling of the CBFS_CACHE mem_pool into CBFS core) for the latest work on the BeagleBone port. I hope it's the right thing to do. Fixes: Makes `master` compile again. Change-Id: Ia51c66dbe425a662ea2a6b2527b2b6982f587891 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51943 Reviewed-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-31mb/google/kukui/var/cozmo: Add RAM ID tableLucas Chen
Add the RAM ID table offset 0x30 for cozmo. BUG=b:182776048 BRANCH=kukui TEST=emerge-jacuzzi coreboot Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Change-Id: Ia29d38f61975c5e29a901adbfad343153628405f Reviewed-on: https://review.coreboot.org/c/coreboot/+/51845 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-30soc/amd/cezanne: Comment the AOAC register accessKarthikeyan Ramasubramanian
Causing the AOAC register access as part of system suspend (S3) causes the suspend procedure to be stuck. Comment it for now to unblock entering S3 and collecting the power numbers. BUG=b:181766974 TEST=Build and boot to OS in Majolica. Enter S3 through "echo mem > /sys/power/state". Change-Id: Ie93bbe393b209b784b9a2257f3916b29d84b25d1 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51926 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-30security: vboot: Clarify PCR extension algorithms/sizesJulius Werner
The PCR algorithms used for vboot are frequently causing confusion (e.g. see CB:35645) because depending on the circumstances sometimes a (zero-extended) SHA1 value is interpreted as a SHA256, and sometimes a SHA256 is interpreted as a SHA1. We can't really "fix" anything here because the resulting digests are hardcoded in many generations of Chromebooks, but we can document and isolate it better to reduce confusion. This patch adds an explanatory comment and fixes both algorithms and size passed into the lower-level TPM APIs to their actual values (whereas it previously still relied on the TPM 1.2 TSS not checking the algorithm type, and the TPM 2.0 TSS only using the size value for the TCPA log and not the actual TPM operation). Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ib0b6ecb8c7e9a405ae966f1049158f1d3820f7e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Pronin <apronin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2021-03-30soc/intel/alderlake: Enable logging of wake sources for S0ixSugnan Prabhu S
This change adds elog.c and xhci.c to smm-y for alderlake platforms to enable the logging of wake sources in eventlog for S0ix. BUG=b:183684923 TEST=Verified on Brya that entry/exit for S0ix are logged in eventlogs. 295 | 2021-03-29 10:31:48 | S0ix Enter 296 | 2021-03-29 10:31:58 | S0ix Exit 297 | 2021-03-29 10:31:58 | Wake Source | RTC Alarm | 0 298 | 2021-03-29 10:32:30 | S0ix Enter 299 | 2021-03-29 10:32:55 | S0ix Exit 300 | 2021-03-29 10:32:55 | Wake Source | Power Button | 0 301 | 2021-03-29 10:32:55 | EC Event | Power Button 305 | 2021-03-29 10:43:13 | S0ix Enter 306 | 2021-03-29 10:43:14 | S0ix Exit 307 | 2021-03-29 10:43:14 | Wake Source | PME - XHCI | 0 308 | 2021-03-29 10:43:14 | Wake Source | PME - XHCI | 0 309 | 2021-03-29 10:43:14 | Wake Source | PME - XHCI (USB 2.0 port) | 8 310 | 2021-03-29 10:43:14 | Wake Source | GPE # | 109 Change-Id: Icc836caa797d3bc4e782c6a51492de23e7b49b71 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51839 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-30security/intel/cbnt: Add options to generate BPM from KconfigArthur Heymans
Use Kconfig options to set BPM fields. Change-Id: I9f5ffa0f692b06265f992b07a44763ff1aa8dfa7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-30soc/intel/xeon_sp: Prepare for CBnT BPM generationArthur Heymans
To generate a working BPM, boot policy manifest for Intel CBnT the tool that generates it, requires ACPI base and PCH PWRM base as input. Therefore make it a Kconfig symbol, that can be used in Makefile.inc. Change-Id: I6f1f9b53e34114682bd3258753f2d5aada9a530d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51805 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-30security/intel/cbnt: Add option to generate an unsigned BPMArthur Heymans
Change-Id: Ic1b941f06b44bd3067e5b071af8f7a02499d7827 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51573 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-30security/intel/cbnt: Add option to generate BPMArthur Heymans
This add an option to generate BPM using the 9elements bg-prov tool using a json config file. A template for the json config file can be obtained via "bg-prov template". Another option is to extract it from a working configuration: "bg-prov read-config". The option to just include a provided BPM binary is kept. Change-Id: I38808ca56953b80bac36bd186932d6286a79bebe Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50411 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-30security/intel/cbnt: Add an option to generate an unsigned KMArthur Heymans
This is useful if you have external infrastructure to sign KM. Change-Id: If5e9306366230b75d97e4e1fb271bcd7615abd5f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51572 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-30soc/ti/am335x: Map useable RAMSam Lewis
Maps the useable RAM so that it can be used for booting a payload. TEST: Booted a simple ELF payload (that just flashes LEDs) on the Beaglebone Black. Change-Id: I7f657c97e4753071c90ba8ca800a96108807e6b9 Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44388 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-30mb/ti/beaglebone: Initialize DDR3Sam Lewis
Adds initialisation of 512MB of DDR memory on the BBB to the romstage. The parameters for the DDR peripherals are taken from U-Boot. TEST: Booted from romstage into ramstage. Also successfully managed to run the "ram_check" in lib.h. Change-Id: I692bfd913c8217a78d073d19c5344c9bb40722a8 Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-03-30soc/ti/am335x: Add SDRAM initialization driverSam Lewis
Adds code taken and (barely) adapted from U-Boot (release 2020.04, commit 36fec02b1f90b92cf51ec531564f9284eae27ab4) for SDRAM initialization. This should in theory work for other configurations than the Beaglebone Black's DRAM configuration, but hasn't been tested. Change-Id: Ib1bc2fa606f7010c8c789aa7a5c37cd41bc484b9 Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44386 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-30mb/ti/beaglebone: Load romstage/ramstage from SDSam Lewis
Adds a "sd_media" boot_device to allow booting from the SD card. This assumes that the generated "MLO" file is placed at a 128KB offset from the start of the SD card, to allow for the MBR etc. to be at the start of the SD card. Placing the MLO file here allows the AM335x boot ROM to load and execute the bootblock stage as well, as 128KB is one of the offsets the boot ROM checks when looking for the next stage to execute. As part of this, a FMD for the Beaglebone has also been defined. It's sized at 32M somewhat arbitrarily, as SD cards could allow for much bigger payloads. TEST: Beaglebone boots from bootblock into romstage. Romstage to ramstage still doesn't work as it needs RAM initialization first. Change-Id: I5f6901217fb974808e84aeb679af2f47eeae30fd Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44385 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-30soc/ti/am335x: Add MMC/SD driverSam Lewis
Adds a driver for the am335x MMC peripheral. This has only been tested with SD cards and probably needs some modification to use eMMC or MMC cards. It's also currently a little slow as it only supports reading a block at a time. Change-Id: I5c2b250782cddca17aa46cc8222b9aebef505fb2 Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-03-29soc/amd: smbus: Use correct type for uintptr_tPaul Menzel
Fix the format warning below by using `PRIxPTR`, which is defined as unsigned long. src/soc/amd/common/block/smbus/smbus.c:33:56: error: format specifies type 'size_t' (aka 'unsigned int') but the argument has type 'uintptr_t' (aka 'unsigned long') [-Werror,-Wformat] printk(BIOS_ERR, "Invalid SMBus or ASF base %#zx\n", mmio); ~~~~ ^~~~ %#lx src/include/console/console.h:60:61: note: expanded from macro 'printk' #define printk(LEVEL, fmt, args...) do_printk(LEVEL, fmt, ##args) ~~~ ^~~~ 1 error generated. Change-Id: I727c490d3097dcf36cdbcd4db2852cd49d11785f Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-03-29mb/amd: majolica,mandolin: Remove needless article from warningPaul Menzel
At the end of the built, the line below is printed. coreboot has been built without an the Microchip EC FW. Remove *an*, as one article is enough. Change-Id: I28b24f0f2dade17e30e16cc6d935976e331a7a97 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-03-29soc/amd/cezanne: factor out UPD-M configuration from romstageFelix Held
Move the parts of romstage.c that populate the UPD-M data structure to the newly created fsp_m_params.c file. Since platform_fsp_memory_init_params_cb gets called from the FSP driver and not directly from car_stage_entry the two code parts in romstage.c weren't directly interacting. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1f7f5879ac318372042ff703ebbe584ce1c32c91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-29soc/amd/picasso: factor out UPD-M configuration from romstageFelix Held
Move the parts of romstage.c that populate the UPD-M data structure to the newly created fsp_m_params.c file. Since platform_fsp_memory_init_params_cb gets called from the FSP driver and not directly from car_stage_entry the two code parts in romstage.c weren't directly interacting. Since soc/romstage.h only contains the mainboard_updm_update function prototype, rename it to soc/fsp.h. This patch also removes a few unused includes. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I52c21f13520dbdfab37587d17b3a8a3b1a780f36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-29soc/amd/cezanne,picasso: rename fsp_params.c to fsp_s_params.cFelix Held
This file populates the UPD-S data structure that gets passed to the FSP-S, so add that s part to make it a bit clearer which FSP parameters it'll set up. This is also a preparation to add a fsp_m_params.c file in the following patches. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I53786df0909055e66eac675b5580909b7960944f Reviewed-on: https://review.coreboot.org/c/coreboot/+/51833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-29mb/google/guybrush: select DISABLE_KEYBOARD_RESET_PINFelix Held
Now that we have the DISABLE_KEYBOARD_RESET_PIN Kconfig option, select it and remove the temporary workaround that was implemented in the mainboard code in commit 39ef89033624a2d14b0c77cdbdf287dd7d7059e1. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I634d11290dad8c93f10979f06243b1bf84737ae2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-29soc/amd: add DISABLE_KEYBOARD_RESET_PIN optionFelix Held
The KBRST_L pin will cause a reset when driven or pulled low even when the GPIO mux is set to GPIO and not native function. So when you want to use that pin as general purpose output the keyboard reset input functionality needs to be disabled by selecting this option in the board's Kconfig file to avoid causing a reset by writing a 0 to the output level bit when it's configured as an output. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Furquan Shaikh <furquan@google.com> Change-Id: I517ad551db9321f26afdba15d97ddb61be1f7d51 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51757 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-29mb/google/guybrush: Enable DISABLE_SPI_FLASH_ROM_SHARINGRaul E Rangel
Guybrush uses GPIO67 as an input. BUG=none TEST=Boot guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I10068bb6870b2cb96033cf3893cde71db5c1d709 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51781 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-29soc/amd/cezanne: Implement PROVIDES_ROM_SHARINGRaul E Rangel
BUG=none TEST=Build guybrush and verified with the PPR that the register and bits are still the same Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I0619f84cf82cbb90ded9dfd58afa6acc9520fb8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-29soc/amd/common/block/acpimmio/mmio_util: add fch_disable_kb_rstFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Kangheui Won <khwon@chromium.org> Change-Id: Ie65e39ffb8c353415f5b68e1e0f378d18eeb7498 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51784 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-29soc/amd: move PM_RST_CTRL1 register definition to common acpimmio headerFelix Held
TEST=Verified that this register and the defined bits exist in Cezanne, Picasso, Stoneyridge, Bolton and SB800. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I32d1d577b05edab006981516a5aefd822e7b984a Reviewed-on: https://review.coreboot.org/c/coreboot/+/51783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-29soc/amd/*/gpio: include types.h instead of stdint.h to have size_tFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7a747d4c28e6d449c054ce83966767e13b51a939 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-28nb/intel/pineview/raminit.c: Correct clkset1 programmingAngel Pons
Reference code does a 32-bit write, and the values don't fit in 16 bits. Change-Id: I1195c0637b5c215a45328ebae312cf620cd4c950 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51860 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28nb/intel/pineview: Correct HICLKGTCTL writeAngel Pons
Reference code uses the `0x06` as an or-mask, which makes more sense. Change-Id: I04e5262d9ab36ae866fccd90255e4a0f85328e85 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51859 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28nb/intel/pineview: Drop MCHBAR macro from DMIBAR accessAngel Pons
While the macro value is the same, the DMIBAR register is not HTBONUS1. Tested with BUILD_TIMELESS=1, Foxconn D41S remains identical. Change-Id: I5025f115f5a55dc782092989f3d158802d1d9353 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51858 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28nb/intel/ironlake/quickpath.c: Correct one valueAngel Pons
Commit 56823f53dc6de5a804f7c88b9f24847133ddc876 (nb/intel/ironlake: Rewrite early QPI init) rewrote this part, but the or-value is missing one zero. Correct this magic value to align with MRC binaries. Change-Id: Id7a6766b3f0fe415dea70cbc54afc30f808c8b16 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51857 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28nb/intel/ironlake: Drop copy-pasted finalisation stepsAngel Pons
This was copied from Sandy Bridge and does not apply to Ironlake. These offsets go past the MCHBAR window (MCHBAR size is 16 KiB on Ironlake). Some of these writes would have collided with `DEFAULT_HECIBAR` if the PCI resource had been reported as fixed. Remove the copy-pasted code. Change-Id: I7688921ad7517cbd68a0c48262b29ecf7b4c396c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51856 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28nb/intel/haswell: Replace `DMIBAR64` and `EPBAR64`Angel Pons
While 64-bit writes seem to work properly, there could be unknown side-effects in some cases, e.g. when running in long mode. Since reference code uses two 32-bit writes, follow suit. Change-Id: I48ed3d94c7865b3a3cce52108e99cf1656b57fc2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51855 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/google/dedede/var/boten: Fix DPTF passive and critical policiesStanley Wu
Thermal sensor2 defined in baseboard do not exist in boten. With the format the DPTF policies are defined in boten, all the entries from the baseboard are included and then the overrides applied. This causes the non-existent DPTF devices to be exported in the ACPI table and in turn OS reading invalid temperatures. Fix the format for DPTF passive and critical policies. BUG=None BRANCH=dedede TEST=Build and boot to OS in boten. Ensure that the DPTF entries look correct in both static.c and SSDT tables i.e. passive and critical policies for applicable devices only are present. Change-Id: I63c781e0a439f1e7a3525fa7cf290fa9300cb066 Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Ben Kao <ben.kao@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-03-28mb/google/zork: update stamp_boost parameter for gumbozKevin Chiu
Original Stamp_boost parameter will cause boost time over 2500sec(3960sec) To pass balance performance and skin temperature test, decrease stamp_boost: 2500 -> 1640 BUG=b:182753072 TEST=1. emerge-zork coreboot 2. run balance performance and skin temperature test Change-Id: I43c104ef912aafecadf9497f9ea20c8478c0e920 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-03-28soc/intel/alderlake: add processor power limits control supportSumeet R Pawnikar
Add processor power limits control support to configure values for alderlake soc based platforms. BRANCH=None BUG=None TEST=Build and test on alderlake rvp board Change-Id: I9dc37c7a43e6bd6f1ff5e8a97e22a0c7ac421802 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-28mb/purism/librem_14: Move/fix touchpad interrupt GPIOMatt DeVillier
On production boards, the touchpad interrupt line was moved from GPP_B20 to GPP_B3. Fix the GPIO pad config and devicetree entry, and update documentation to remove touchpad config issue. Change-Id: Iaefeba8f78c567b67e7a416c27299bff574c23ab Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51797 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28soc/intel/common/gpio: Add function to get GPIO index in groupTim Wawrzynczak
The gpio_get_index_in_group function returns the index of the GPIO within its own group Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I7f6b312bd1d0388ef799cd127c88b17bad6a3886 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-28soc/intel/common/systemagent: Add macros to access REGBAR spaceTim Wawrzynczak
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I97203aca377d4dd77e03b2c83fdd20a2874cc1c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51755 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28soc/intel/tigerlake: Fix REG_BASE_SIZETim Wawrzynczak
REG_BASE_SIZE is supposed to represent the size of the REGBAR MMIO space in KiB. It is currently sized at 4MiB, but this is incorrect, EDS Vol. 2 indicates REGBAR is 16MiB in size, therefore update the constant to reflect this. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I0cfbe5b8bb07faa854efd4bf70640daa117f2bb2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-28soc/intel/common/tcss: Rename TCSS_DISPLAYTim Wawrzynczak
This name isn't very meaningful, rename the config option to ENABLE_TCSS_DISPLAY_DETECTION to make its meaning more obvious. Change-Id: Ib21a3b5a37d25f93bd515f8c6e5ad39c9d2ea1c4 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51771 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28soc/intel/tigerlake: Move TCSS code to intel/common/blockTim Wawrzynczak
The Type-C subsystem ("TCSS") IP block is similar between TGL and ADL. For pre-boot purposes, the limited amount of functionality required appears to be common between the two, therefore move the functionality to intel/common/block and rename from `early_tcss to `tcss` along the way. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I1c6bb9c7098691f0c828f9d5ab4bd522515ae966 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51753 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28ACPI: Add SATC structure for DMAR tableJohn Zhao
The SoC integrated address translation cache(SATC) reporting structure is added to Virtualization Technology for Directed I/O specification Rev3.2. This change adds an ACPI Name-Space Device Declaration structure SATC which has type 5 reporting structure. BUG=None TEST=Built image successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I91d1384083c98b75bcbdddd9cc7b7a26fab25d9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/51776 Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/google/dedede/var/blipper: Enable ALC1015 AMP (Auto Mode) driverlizhi7
Enable gpio mode driver for ALC1015 AMP Auto Mode. BUG=b:181732574 BRANCH=dedede TEST=ALC1015Q-VB drive speaker OK Signed-off-by: lizhi7 <lizhi7@huaqin.corp-partner.google.com> Change-Id: Idc5b190fc2c30689feaf08229b2a75c69894ac5e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51763 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/google/dedede/var/storo: Enable ALC1015 AMP (Auto Mode) driverlizhi7
Enable gpio mode driver for ALC1015 AMP Auto Mode. BUG=b:177868812 BRANCH=dedede TEST=ALC1015Q-VB drive speaker OK Signed-off-by: lizhi7 <lizhi7@huaqin.corp-partner.google.com> Change-Id: Ic7deb9be6444d85d32ff94ce8e4a140dbdea349e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-03-28mb/google/dedede/var/storo: Configure I2C times for I2C devicesTao Xia
Configure I2C high / low time in device tree to ensure I2C CLK runs accurately at I2C_SPEED_FAST (400 kHz). Measured I2C frequency just as below after tuning: touchpad:371.63 kHz touchpanel:368.24 kHz audio codec RT5682:369.13 kHz speaker AMP L:366.21 kHz speaker AMP R:365.8 kHz P-sensor:368.34 kHz MIPI Camera:363.35 kHz BUG=b:181589325 BRANCH=dedede TEST=Build and check after tuning I2C clock is under 400kHz Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: I1a755a54540e106b41ac427f84989ed7e8037558 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51624 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28soc/amd/common/gpio: add PAD_NF_SCI pad typeFelix Held
This patch adds a pin configuration macro that supports both switching a pin to its native function and configuring it as a SCI source. This is a preparation to remove the GPIO2 soc_gpio_hook. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If0da5c010f35fd902f6b8857368daec93c12394a Reviewed-on: https://review.coreboot.org/c/coreboot/+/50373 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/google/zork: update telemetry settings for gumbozKevin Chiu
update telemetry to improve the performance. BUG=b:182753072 BRANCH=zork TEST=1. emerge-zork coreboot 2. run AMD SDLE stardust test => pass Change-Id: I6e4d0c6fcd740d82edf073fb307aa6a6b09ec78a Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51790 Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/google/caroline: Re-enable I2C2 / fix digitizerMatt DeVillier
Caroline has a Wacom W9013 digitizer on I2C2, which was incorrectly disabled in commit d957d12e6 [mb/google/glados: clean up variant devicetrees] as part of preparation for converting to overridetree format. Test: build/boot, verify digitizer now available under Linux Change-Id: I234bc0126b5d13c22a663d6544382890b312ce63 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-28mb/intel/adlrvp_m: Enable ADL-M RVP LP5 memory configurationMaulik V Vaghela
List of changes: 1. Add correct board Id for ADL-M LP5 configuration 2. Add spd hex files for LP5 Micron part 3. Update memory.c file with correct Dq-dqs and byte mapping for LP5 BUG=None BRANCH=None TEST=Build is successful for ADL-M RVP Change-Id: I0bbd3f5b56bf7fbe918cc599d32a01dcae896ddd Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2021-03-28mb/intel/adlrvp_m: Enable ADL_M RVP LP4 memory configurationMaulik V Vaghela
List of changes: 1. Add board Ids for ADL-M LP4 configuration 2. Add spd hex files for LP4 configuration 3. Update memory.c file with correct Dq-dqs and byte mapping for LP4 BUG=None BRANCH=None TEST=Build and boot is successful for ADL M LP4 RVP Change-Id: Id817faee3fff2a8a911ebda35774dfb6ddc5524b Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50257 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/intel/adlrvp: Configure GPIOs for ADLRVP-MVarshit Pandya
List of changes: 1. Add separate file for ADL-M GPIOs 2. Configure GPIOs as per the schematics of ADL-M RVP TEST=Able to build ADL-M Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com> Change-Id: I03a532f69f42db723b976a0f7b0acf6f4b98e354 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2021-03-28mb/intel/shadowwmountain: Enable CSE Lite SKU for shadowmountainSridhar Siricilla
During the initial phases, the development and validation teams have to deal with both Consumer SKU and Lite SKU firmware. Having the support for CSE Lite enabled by default in coreboot helps in integrating both the SKUs. With this we only have to interchange the CSE region in the full BIOS image without having to worry about Kconfigs. Eases the build and integration flow. TEST=Verified build for Shadowmountain Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I2ebf4da1b8c1df2e9c43b6e3bb688a9f8db652d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51496 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/intel/adlrvp: Enable CSE Lite SKUSridhar Siricilla
During the initial phases, the development and validation teams have to deal with both Consumer SKU and Lite SKU firmware. Having the support for CSE Lite enabled by default in coreboot helps in integrating both the SKUs. With this we only have to interchange the CSE region in the full BIOS image without having to worry about Kconfigs. Eases the build and integration flow. TEST= Built and booted on ADL-P LP4 RVP Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ia92c7b71c69a23104ace9fc53fd39f01120fa751 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51567 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-25 21:24:39 +0000