| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds AML IccMax for VR configuration. From doc #594883, the
IccMax for Core was changed to 28A, we need this patch to accommodate
the changes. Besides, removes unused sku information from
sku_icc_max_mapping structure.
BUG=b:110890675
BRANCH=None
TEST=Remove icc_max from DT &
emerge-atlas coreboot chromeos-bootimage &
Tested with AML-Y and KBL-Y SKUs.
Change-Id: Ic22bae162b58b06b9519f1b708be55bde5e4641e
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/27610
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update power limit1 value from 8W to 10W. There is an error
in the energy calculation for current VR solution on GLK.
Experiments show that when power limit1 set to 10W, gained
performance improvement with SoC TDP reaches max (6W) power.
BUG=b:79779737
BRANCH=None
TEST=Build coreboot for Octopus board.
Change-Id: Ic320d442e7401e4be2e8e16d691db4c803f0fdc1
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/27819
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
setup_spread_spectrum is called in early_init, meaning the console is
not initialized yet. So you won't see boot block booting twice.
BUG=b:111610455
TEST=booted grunt and verified that AmdInitReset does not reboot. I had
AGESA patched to skip the JTAG check.
Change-Id: Ia036ea513ac67d4b8bcf5a78029d969a4ae012a6
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
From doc 571118, the bit 5 of OdtConfig is nWR config.
If the bit 5 is set, MRC will set MR1 nWR field to 24.
If the bit 5 is clear, MRC will set MR1 nWR field to 6.
Change-Id: Ic8e4e2ffb098c8ba2f670535981e9a30c3d45b64
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/27814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change adds ACPI properties for WDT8752A device.
BUG=b:111402335, b:111102092
BRANCH=master
TEST=Verify touchscreen on fleex works with this change
Change-Id: Id186d5b87343007ae7e631d5d27464ee27e5b27d
Signed-off-by: Crystal Lin <crystal_lin@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/27800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Use the default value for Iccmax which is specified in vr_config.c.
The AcLoadline and DcLoadline keep the poppy value. Besides, the
USB 2.0 ports located on the mainboard are set to USB2_PORT_SHORT
and the others on the daughterboard are set to USB2_PORT_LONG.
Those setting need to be fine tuned later.
BUG=b:111579386
BRANCH=Master
TEST=Build pass
Change-Id: Icabfac04c94b3d480872c243d811509e274ef122
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/27808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The gpio setting is based on the proto board schematics
BUG=b:111579386
BRANCH=Master
TEST=Build pass
Change-Id: I20fc081d372b8686f6128a7e85276f9c6798b199
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/27807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add memory configuration based on the proto board schematics
BUG=b:111579386
BRANCH=Master
TEST=Build pass
Change-Id: I45efdc7893b5bcbca0de6e932e1452cc1a2ff028
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/27806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Rammus uses DA7219 Headset, Maxim MAX98927 Smart Amps and 4 channel dmic
BUG=b:111579386
BRANCH=Master
TEST=Build pass
Change-Id: If21a3870ee4b000a776d2f3e025fb43ef2fe48c7
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/27805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Move the build board directory from poppy to rammus.
BUG=b:111579386
BRANCH=Master
TEST=Build pass
Change-Id: I3a9fc2bbfe7261661f0c5c073baff0ff1434d09f
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/27804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
BUG=none
TEST=none
Change-Id: Ic2d7bf5f5335894ede98dc7e6cc6a65e4897e487
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Kahlee based boards don't use SATA, so disable SATA on all boards to save
power.
BUG=b:112139043
TEST=Build and boot grunt, checked the absence of SATA PCI.
Change-Id: I6a12c03a5a95b1c8b40609a3fe656df92548b80b
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Grunt boards don't use SATA, so it should be disabled to save power.
Check if SATA is enabled in devicetree, and enable/disable the device
based on that setting.
BUG=b:112139043
TEST=Buil and boot grunt, checked the absence of SATA PCI.
Change-Id: I4a3b5f65e612e8da5bedff0c557a0850f350dfa8
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Since only a handful of boards have descriptor blobs in the tree, it makes no
sense to have `HAVE_IFD_BIN` enabled by default then disabled on each mainboard.
This patch flips the default value of said variable, rendering all current
overrides unnecessary. The few boards which have an IFD in the blobs repo use
`select HAVE_IFD_BIN` to enable adding the IFD by default.
Since `HAVE_ME_BIN` depends on `HAVE_IFD_BIN`, the former has been removed
alongside the latter, and has been added to the boards with a ME blob as
`select HAVE_ME_BIN`.
Both `HAVE_IFD_BIN` and `HAVE_ME_BIN` have been removed from autoport as well.
Change-Id: I330c4886f8bea4b1a8ecad6505a0e5cc381654d1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/27218
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch contains the parts that changed the hash of the generated binary;
probably due to the compiler optimizing things slightly different.
Change-Id: I3233ba1747dcf5ad05b2ad771a86e3936f655d1c
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I7935cc166aa39f4053f45eef925d92ce50fd98ba
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This part of the cleanup patches changes the hash of the output binary; likely
due to the compiler optimizing things differently.
Change-Id: I1a22f6216a75e2b463d4e169e97ad6e0bbaafae8
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27708
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I62e4a8610689e72944e1a9c020f13a47d402c136
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
On a a timeless build with coreboot i386 crossgcc 6.3.0, this doesn't change the
hash of the output binary.
Change-Id: I15e09320e72cffb8a2617eca0cfe40780f74bece
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27707
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The code only compiled when REAL was set to 1; the other case included an
unpublished include.
Change-Id: I7f31e9cd02f45492d6c9e88ec6164a537ca5e3c2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27706
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Due to vendor's requirements LED 2 and LED 3 should be turned
off in late boot process. Add appropriate functions to read and
write GPIO status.
Change-Id: Ia286ef7d02cfcefacf0e8d358847406efe1496fb
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/27729
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change GPIO setting to use IOMUX to refer to GPIO by
IOMUX register as in BKDG for Family 16h Models 30h-3fh
Processor Rev 3.06.
Change-Id: Icf4a60acabe65cd7f9985bb3af8bd577764d4196
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/27665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
* Add Mailbox 3 driver
* Request brightness change through Mailbox 3
* Return Ones on error or if unsupported
* Mark existing code as legacy
(still required if no GMA driver is running)
* Call legacy code if Mailbox 3 is unsupported, on error or
if gma driver isn't running
Tested on Lenovo T430:
* Brightness control still works
* Brightness is the same on S3 resume
Change-Id: I51554c819148336b204d28972cbf775a10c3fb8a
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/27711
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nathaniel Roach <nroach44@gmail.com>
Reviewed-by: Nicola Corna <nicola@corna.info>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
* Make tcpa_log_init static and move init code into
the tcpa_log_add_table_entry routine.
* Add more checks for log initialization.
* Fix minor issues
Change-Id: I215d79eed7ad17c6ab87f0c4b14a282e519ef07d
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/27769
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch changes the return type of gpio_base2_value() and related
functions from int to uint32_t. This makes more sense now that
board_id() and related functions (which are the primary use case) also
return that type. It's unlikely that we'll ever read a strapping of 32
GPIOs in a row, but if we did, we'd probably want to treat it as
unsigned.
Change-Id: I8fb7e3a7c76cb886aed40d0ada1f545180e43117
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Remove ACPI code which isn't necessary anymore due
to the LPC TPM ACPI generator.
Change-Id: I2fae286d61ec7c1036d1a8fa800dc8d9603252e9
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/27767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
For some reason the PSPP setting was being overwritten in the common
code. Remove the setting and allow the oem customize function to
make the setting.
BUG=b:112020107
TEST= build test
Change-Id: If7f4511a71f725fedd60d33552656850e50d955d
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/27783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Tested with GRUB 2.02 as a payload, booting Debian GNU/Linux 9.5 with
kernel 4.9. This code is based on the output of autoport.
The file `data.vbt` matches the VBT in the latest version of the vendor
firmware (version 4601).
This board works well under coreboot. A list of what works and what
doesn't can be found in the documentation part of this commit. To
summarise: the only known issues are that S3 suspend/resume doesn't
work, and that there is no automatic fan control via the super I/O.
Change-Id: I2a0579f486d3a44de2dd927fa1e76b90c3b48f62
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/27798
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
By defining SUPERIO_KBC_PS2M, ACPI code is added to show the PS/2 mouse.
This has been tested on an ASUS P8H61-M LX with Linux 4.9.110 and
4.17.8. In each case, the PS/2 mouse works automatically, whereas it was
not detected before.
Change-Id: I7983f85b3fd23547950f1f75a81bbca63c63d52b
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/27797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
When compiling for the ASUS P8H61-M LX, IASL 20180531 emits the
following remark: "Control Method should be made Serialized (due to
creation of named objects within)". Making the appropriate methods
Serialized eliminates these remarks.
Change-Id: I8e95d9a00a629a2f904c79b78fac20810327ed37
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/27796
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Exposing the parallel port via ACPI causes Linux to automatically detect
the parallel port and load the appropriate modules. Tested on an ASUS
P8H61-M LX with Linux 4.9.110 and 4.17.8.
However, no parallel port device has been tested.
Change-Id: I2529a074e24433d093ad0650a45c7b29238620f3
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/27795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Commit ef8c559e537ed10d8054ca6a72ca50e0531fde95
[nb/intel/sandybridge/report_platform: Move remaining code to sb folder]
moved reporting code to the southbridge, but missed a reference in the
non-default MRC raminit path (so testing missed it).
Remove invalid reference to fix compilation error.
Test: build google/link with MRC raminit option selected
Change-Id: I270a95ac53fbc9f8792f375908cf91585261f6a1
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The constant used in the ACPI code is NCT6776_SHOW_KBC, so update
the comments to reflect that.
Change-Id: I9ba69384866088f84a516557d76864104a024968
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/27794
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
timer_monotonic_get() was only compiled in a !__PRE_RAM__ environment.
Clean up the code paths by employing CAR_GLOBAL for the global state
which allows the same code to be used in all stages.
Change-Id: I08fd1795508f76abdab1618585366bf9d06482ff
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27801
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These boards require polling vs interrupts, so remove the IRQ definition to
prevent it being added to the SSDT device entry.
Test: Boot Linux on various auron and cyan variants, verify no error for
'TPM interrupt not working' present in kernel boot log.
Change-Id: Ia1139389f075934d41e823ce5190011c90c7cc88
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
According to #574725, report Whiskey Lake CPUID, MCH device ID and
graphics device ID in bootblock stage.
BUG=N/A
TEST=Build and boot up whiskey lake rvp platform and check serial log to
see proper CPU/MCH/GFX/PCH got recognized.
Change-Id: I3fbc190e0520989d2fd4a9b3294e84d67e49b2cf
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/27756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
|
|
Add coffeelake config and include path to coffeelake fsp header files.
BUG=N/A
TEST=Using private mainboard file can boot up on coffeelake rvp
platform.
Change-Id: Ide180de32a9d1896bed85b9e093963721c3d6041
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/27468
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch applies correct AC/DC loadline settings for Atlas from
VRTT report.
BUG=b:111419622
BRANCH=None
TEST=emerge-atlas coreboot chromeos-bootimage and use DbC to check
the AC/DC loadline settgins.
Change-Id: I6e85b885a6d3a1db9a980d12f3cfc036a771422a
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/27788
Reviewed-by: Caveh Jalali <caveh@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch makes sure we deassert the USB hub reset pin so the hub will
work with the next board revision that drops the external pull-up.
(Actual USB support comes in a later patch.)
Change-Id: I1efdc3594cfa3229891d42d445a21c1739170b79
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27790
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds the required callbacks to read all strapping IDs on
Cheza.
Change-Id: I6437bbd03bdd00dfeedcafebabeb00b13588d052
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Extracted from live running Thinkpad x1 carbon gen1 with vendor firmware.
Thanks to Igor Lee.
Change-Id: Id59517d9040c98e67a42fbce537f42f6b0c6db2d
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: Igor Lee <getrun@gmail.com>
Reviewed-on: https://review.coreboot.org/27782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Tuning of fan speed for different temperature values. Earlier while
running few benchmarks, fan was always getting on and starting at
higher speed. With this change fan will start with lower speed and
slowly speed gets increased if temperature continue going high.
Thermal team provided these data after fine tuning of fan speed.
BUG=None.
TEST=Verified on Nami running with different benchmarks and observed
fan speed.
Change-Id: Ic3be9e44deef9570200c71807a2ee712d9f20876
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/27683
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is a potential IMVP8 issue for KBL that affects Intersil VRs
Nami is using one of the affected parts. The fix is to use an updated
microcode and also send a mailbox box command from FSP.
BUG=b:112081534
BRANCH=None
TEST=Build and boot Nami
Verify that suspend/resume and consecutive reboots are working
Change-Id: I6ec18a4c3fae6a66cf8a95685d91a8ba51e2697c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/27780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Adapted from chromium commits 831a372 and cc96c27
[Banon: board 2nd source DDR memory]
Add support for hynix/H9CCNNN8GTALAR-NUD and Nanya/NT6CL256T32CM-H1
Original-Change-Id: Ifd161ba5ade44e71c88655f760ca66668b5c5178
Original-Change-Id: I5cba13701ed8e037e21d34ed55162ee56291a842
Original-Signed-off-by: T.H. Lin <T.H_Lin@quantatw.com>
Original-Tested-by: TH Lin <t.h_lin@quanta.corp-partner.google.com>
Original-Reviewed-by: Vincent Wang <vwang@chromium.org>
Original-Reviewed-by: YH Lin <yueherngl@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I2166d1025ede33148c7ab623ba59190a342c4736
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Adapted from chromium commits 2319742 and 3b59fb2
[Edgar: Add Micron MT52L256M32D1PF-107 SPD data]
[Edgar: Add Hynix H9CCNNN8GTALAR-NUD and Nanya NT6CL256T32CM-H1 SPD data]
Supported 2nd source Hynix, Micron, and Nanya memory.
TEST=Built and used mosys command by "mosys -k memory spd print all"
Original-Change-Id: Iec9160b74d2812620d2d28f841d503e2d63c8579
Original-Change-Id: I610f01a0198f835a2038511ff78bf0cfba7812a0
Original-Signed-off-by: Hank2_Lin <Hank2_Lin@pegatroncorp.com>
Original-Reviewed-by: Vincent Wang <vwang@chromium.org>
Original-Reviewed-by: YH Lin <yueherngl@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: If2379d6e58425616f49d77b0cdea1cd90f9a8bfa
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Adapted from chromium commit adcb858
[cyan: Configure WLAN_CLKREQ as GPIO and always assert low]
This is a workaround for issue b/35648315 as proposed by Intel to
ensure that WLAN_CLKREQ always stays low.
BUG=b:35648315
Original-Change-Id: I178b3e4fbf74cf08eadfa8bd31b80b018f330e77
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/1055652
Original-Reviewed-by: Rajat Jain <rajatja@chromium.org>
Original-Tested-by: Rajat Jain <rajatja@chromium.org>
Change-Id: Ie3458b3fbd1ecadf6b99b9804fb98440cf8d6938
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27762
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Adapted from chromium commit cf18ab6
[Strago: mask Audio IRQ on boot]
Do not start with audio interrupt unmasked; this causes interrupt storms
on newer kernels that no longer mask all interrupts when initializing
Cherryview pincontrol driver.
TEST=Boot various cyan boards with kernels 3.18 and 4.14;
verify everything works.
Original-Change-Id: Id621682d3b59fea3ac54fb0ab92c8df9c78a6d43
Original-Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/894688
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Icb55c885ea661c41168d3bd24109d2cdbb225546
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Adapted from chromium commit 3750e09
[Strago: mark GpioInt() resources as PullDefault]
coreboot considers GPIO resources first-class citizens and initializes
all pads according to their intended use, with necessary pull settings
applied. Therefore let's use PullDefault as pull qualifier in AML,
letting the kernel know that it should not attempt to alter pull settings
when using GPIOs.
TEST=Built and booted on celes, cyan, and egdar; built for other cyan devices.
Original-Change-Id: Iff58a324e73a7eeac9b38df05a095fcfe7acd31b
Original-Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/898259
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I0c69e77c58b8ceca71bc0c99e16d10c3e539f783
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27760
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adapted from chromium commit 126d352
[Strago: switch Touchpad and Touchscreen interrupts to be level-triggered]
The Elan and other touch controllers found in this device work much
more reliably if used with level-triggered interrupts rather than
edge-triggered.
TEST=Boot several cyan boards, verify that touchpad and touchscreen
work.
Original-Change-Id: I59d05d9dfa9c41e5472d756ef51f0817a503c889
Original-Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/894689
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ia4f8cf83351dae0d78995ce0b0ed902d1e4ac3e8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Adapted from chromium commit ee7a150
[Strago: do not hardcode virtual interrupt numbers]
Instead of hardcoding virtual interrupt numbers that may change as
the kernel changes, use GpioInt() resources to describe keyboard,
touchpad, and touchscreen interrupt lines.
TEST=Build and boot several cyan variant boards, verify keyboard,
touchpad and touchscreen work with newer kernels (4.14+).
Original-Change-Id: I98d5726f5b8094d639fb40dfca128364f63bb30b
Original-Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/894687
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Iecfb45be433249d274532eb746588483fedb3f52
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since this works on Yorp and Bip, we should enable EC SW sync for all
known boards so that it doesn't get forgotten.
BUG=None
TEST=None
Change-Id: Ifee8e0b6620dc7554160a10a8e4663db25b6413d
Signed-off-by: Justin TerAvest <teravest@chromium.org>
Reviewed-on: https://review.coreboot.org/27755
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduces new and required GPIO APIs, using common pinmux
definitions for GPIO configuration.
TEST=build & run
Change-Id: I8cef9dae2072da32cb0678efefeb8f0070cdde9c
Signed-off-by: David Dai <daidavid1@codeaurora.org>
Reviewed-on: https://review.coreboot.org/26233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
With commits 9987534 [southbridge/intel: Remove leftover TPM ACPI code]
and 66ce18c [soc/intel: Remove legacy static TPM asl code] removing
TPM ASL code from the southbridge's LPCB device, the LPC TPM chip driver
(drivers/pc80/tpm) must be added to devicetree in order to ensure the
new acpigen code is used to replace it.
Test: boot various google/samsung boards, verify SSDT created with
LPBC.TPM device and TPM visible to and usable by SeaBIOS and Linux
Change-Id: Iedaa01f26fb357914549bb3dda24b0bd6ef67480
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27786
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I1c81eb7c8ed0b819bb76196208cc1269180aca55
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
This effectively means it is possible to run another bootblock located at
top_of_flash - 64K.
The i82801gx southbridge has the ability to swap the two top 64K ranges by
flipping the BUC.TS bit (RCBA[3414] bit0).
This allows coreboot to build roms with a bootblock at the top swap offset by
selecting CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK.
Change-Id: Id96e10aea3e5fd955d45287134eb8643be414de9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
src/arch/riscv/stages.c is an entry of romstage/ramstage, and does not
needs to be bootblock.
src/arch/riscv/id.S src/arch/riscv/id.ld is used to generate some
compile/board/time information, which is repeated with src/lib/version.c
Change-Id: Ic736b378e24df387584c5f86a2b04078fc55723d
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/27557
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
2 bits of LPC host control were originally not public, and wrongly
identified as IMC related. Now that the bits are available in public BKDG,
fix the naming of the bits.
BUG=b:111912080
TEST=build and boot grunt.
Change-Id: I1921f46c6be54eda6329c98267cec27004caadd5
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27744
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds a function to overwrite AC/DC loadlines for differnt
projects.
BUG=b:111761175
BRANCH=None
TEST=emerge-nami coreboot chromeos-bootimage and use DCI to dump
AC/DC loadline settings. Tested on Vayne and Akali.
Change-Id: Id0068c5334c257b9f4c32b6088becbfe8391a864
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/27644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch doesn't change the hash of a timeless build.
Change-Id: I5d329f65be0eee741fd330c0926881ff4f956624
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Change-Id: I01bd69605760e8a03787dcfa3da9f47576e3144a
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
This patch contains the parts that changed the hash of the generated binary;
probably due to the compiler optimizing things slightly different.
Change-Id: Ide0b3296864e24edb646956e47221bfef8182e3d
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27725
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When using timeless builds and coreboot crossgcc 6.3.0, the checksum of the
resulting binary doesn't change with applying this commit.
Change-Id: I2b1dc8befa3381f3edac06704e31e7ef50f86fa4
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27724
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I5d91674ebd281a595e7c0462671f4715ca09cb5c
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27723
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
pci ops happen to work on this struct device since the device_path is an union.
This patch still keeps adding the fixed resources in the pci_domain
ops since moving it to the PCI ops which could properly use the
function argument for PCI operations would require all PCI IDs to be
added or else breakages are to be expected.
Change-Id: I598b056d5fb1ce23b390b2f0ab4e9fb242d3685a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27242
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
pci ops happen to work on this struct device since the device_path is an union.
This patch still keeps adding the fixed resources in the pci_domain
ops since moving it to the PCI ops which could properly use the
function argument for PCI operations would require all PCI IDs to be
added or else breakages are to be expected.
Change-Id: Iea5a09c62cca102b2c211e9256295c24cf3e9fa0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27243
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
pci ops happen to work on this struct device since the device_path is an union.
This patch still keeps adding the fixed resources in the pci_domain
ops since moving it to the PCI ops which could properly use the
function argument for PCI operations would require all PCI IDs to be
added or else breakages are to be expected.
Change-Id: Iabfd15884ec8feb846d01b6af3c4afe5c1494feb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27245
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
pci ops happen to work on this struct device since the device_path is an union.
This patch still keeps adding the fixed resources in the pci_domain
ops since moving it to the PCI ops which could properly use the
function argument for PCI operations would require all PCI IDs to be
added or else breakages are to be expected.
Change-Id: Id73c16fad4fb9ece78595844a39da993d169f057
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27244
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Specifically PCI device ID for graphics and PCI device ID for northbridge.
Change-Id: Ide237d3274df0543409c8a23b9bb50c8e0a6b7a3
Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com>
Reviewed-on: https://review.coreboot.org/27519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kin Wai Ng <kin.wai.ng@intel.com>
|
|
Change f849972 (security/vboot: Enable TCPA log extension) enabled
support for adding TCPA log to CBMEM. However, if CBMEM is not online,
this function doesn't do anything and returns early. This condition is
not really a valid error condition as it depends on when the call to
tcpa_log_add_table_entry is made. Since tcpa_log_add_table_entry
returns -1 when cbmem is not online, tpm_extend_pcr prints an error
message with prefix "ERROR:". This can confuse any scripts trying to
catch errors in boot flow.
This CL makes the following changes:
1. Removes the print in tpm_extend_pcr since tcpa_log_add_table_entry
already prints out appropriate ERROR messages in case of failure to
add log entry.
2. Since the return value of tcpa_log_add_table_entry is not used
anymore, return type for tcpa_log_add_table_entry is changed to void.
BUG=b:112030232
Change-Id: I32d313609a3e57845e67059b3747b81b5c8adb2a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
Add lpddr4 skus for new memory sources K4F6E3S4HM-MGCJ and MT53E512M32D2NP-046.
BUG=b:111964159
BRANCH=master
TEST=emerge-octopus coreboot chromeos-bootimage
Change-Id: Id39a332998b28262e5aa45822078f3c4087f163f
Signed-off-by: nickchen <nickchen@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/27747
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Peichao Li <peichao.wang@bitland.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This never got enabled for fleex; we should enable this to make it
easier to have updated EC firmware.
With this commit, here's the relevant console messages:
sync_one_ec: devidx=0 select_rw=4
update_ec: Updating RW(active)...
Trying to locate 'ecrw' in CBFS
update_ec: image len = 137580
EFS: EC is verifying updated image...
send_packet: CrosEC result code 1
EFS: EC doesn't support EFS_VERIFY command
vboot_hash_image: No valid hash (status=0 size=0). Compute one...
print_hash: RW(active) hash: 35ba735cf97dd990f6f7f0895264382aa20beb4e7ba57270b0a7b24686e26afd
Trying to locate 'ecrw.hash' in CBFS
sync_one_ec: jumping to EC-RW
send_packet: CrosEC result code 12
EC returned from reboot after 27753us
BUG=b:112038021
TEST=Successful boot after EC update via sync
Change-Id: I2dc97c8e2b07f3bdef0d723789cc12c23b32c135
Signed-off-by: Justin TerAvest <teravest@chromium.org>
Reviewed-on: https://review.coreboot.org/27753
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When I tried to compile the RISC-V code (202e7d4f3c), I found some errors:
`PRIu64` is undefined
src/arch/riscv/timestamp.c does not exist
Currently RISC-V does not have the implementation and use of timestamp,
so I temporarily delete the code related to timestamp in the Makefile.
And define PRIu64.
Change-Id: I7f1a0793113bce7c1411e39f102cf20dbadda5d6
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/27543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Add support for libgfxinit
Test: boot stumpy, verify all outputs operational prior for pre-OS display
Change-Id: Ia720814c2225502316de5c5e9639c67df65a2ed0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The careena board requires a different setting within VBIOS in order to
pass the eDP eye diagram test. Update all kahlee boards to use the new vBIOS.
CQ-DEPEND=CL:1153080
BUG=b:111673328
TEST=Verify, via SOME unspecified method, that the new vBIOS is built into
the Grunt/Careena ROM files.
Change-Id: I268cd3dbce6ba1f7bd781d768f470463846a4e10
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27643
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Per AMD, the Integrated Micro Controller is not a supported feature of the
Stoney Ridge APU. Systems are expected to implement an external EC for
desired features. Remove all stoney IMC files and functions from vendor code.
BUG=b:111780177
TEST=Build grunt and gardenia
Change-Id: I06e993fa498cc0978c1d037bc6001682407f7fac
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27652
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Per AMD, the Integrated Micro Controller is not a supported feature of
the Stoney Ridge APU. Systems are expected to implement an external EC
for desired features. Remove all stoney IMC files and functions from
src/soc/amd/stoneyridge.
There are 2 "IMC bits" left (and used) that are not truly IMC. New BKDG
describe these bits, so a new patch will be released later to fix the
names and comment.
BUG=b:111780177
TEST=Build grunt and gardenia
Change-Id: I6a24e4c3f03d04713a030b884c611d9c64c4cb3a
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27651
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Per AMD, the Integrated Micro Controller is not a supported feature of the
Stoney Ridge APU. Systems are expected to implement an external EC for
desired features. Remove IMC files and functions from gardenia.
BUG=b:111780177
TEST=Build gardenia
Change-Id: I570b7f8e364b0c2937592590cc033d5a6c9fade0
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27650
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When using timeless builds and coreboot crossgcc 6.3.0, the checksum of the
resulting binary doesn't change with applying this commit.
Change-Id: I057abe314622e92000c7e4ff2faa4595edb5244b
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This makes i82801ix use the common smm southbridge code to set up smm
relocation and smi handler setup. This is needed in this change for the
the smm relocation code relies on some southbridge functions provided
in the common code. Some of the old code is kept for the Q35 qemu
target.
This also caches the TSEG region and therefore increases MTRR usage a
little in some cases.
Currently SMRR msr's are not set on model_1067x and model_6fx since this needs
the MSRR enable bit and lock set in IA32_FEATURE_CONTROL. This will be handled
properly in the subsequent parallel mp init patchset.
Tested on Thinkpad X200: boots and going to and resuming from S3 still
works fine.
Change-Id: Ic80c65ea42fcf554ea5695772e8828d2f3b00b98
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23419
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie95321f3eb6fb17b17eb25e8a54670654c373706
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
According to the "Intel® 64 and IA-32 Architectures Software Developer’s Manual"
the SMRR MSR are at a different offset for model_6fx and model_1067x.
This still need SMRR enabled and lock bit set in MSR_FEATURE_CONTROL.
Change-Id: I8ee8292ab038e58deb8c24745ec1a9b5da8c31a9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This code was copied from x86. It is not needed for RISC-V.
Change-Id: If6c3bfdc4090e45d171e68a28d27c38dabe91687
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/27544
Reviewed-by: Philipp Hug <philipp@hug.cx>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Store the power on defaults in the _REG method after the ERAM region
is ready for use. It might not be ready when accessed from _INI.
Tested on Lenovo T430.
Change-Id: I70f22f8ac61dd850180fa159313bb0f8e4ab31d9
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/27710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Ibb13627bcd2ad023f7686b5ae0bd7331e09cf5b4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27283
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ife344d1699a2eff7d93738221a0e87d0481f05d7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27285
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: If4d6c80e95469341f0c978f302f04508f50280bd
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Id42bbea1f2deb0be80af2c8008045d37a926126a
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Ie95d9c04375e0125bae9bc01ae5caef423faf33e
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/27679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The careena board needs different video settings to pass eye diagram test,
which does not affect negatively the grunt board. In preparation for new
VBIOS, AGESA environment needs eDP high vdiff enabled.
BUG=b:111673328
TEST=Add debug code to AGESA to display set eDP. Build AGESA. Build and
boot grunt. Add new code to grunt, build and boot, verify eDP changed.
Change-Id: I3e6b409699e8192eb39cc189628ff95b9f985e54
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The careena board needs different video settings to pass eye diagram test,
which does not affect negatively the grunt board. In preparation for new
VBIOS, create code that allows changing eDP training parameter.
BUG=b:111673328
TEST=Tested in child patch.
Change-Id: Ic0452618bfc5e05b9ef8280bb8ba398ec7b4ce95
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
- add Nanya NT6CL256T32CM-H1 to memory strapping table
BUG=b:111906760
BRANCH=none
TEST=none
Change-Id: I1432b9ab84f01a7fee1bc562aa40c714ddbf639e
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/27660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Caveh Jalali <caveh@google.com>
|
|
This change primarily moves the PowerResource up to a more common scope so
that the _PRx references are simpler. The ^ scope modifier isn't well
supported everywhere amongst OSes and drivers. Windows 10 will BSOD
early during boot with ACPI_BIOS_ERROR (code 0x6, which means it could
not find the object referenced by a _PRx) with the way things are currently
laid out).
I've also not seen a firmware outside of coreboot that tries to reference
count _ON and _OFF. Isn't it up to the OS to deference count, and whatever
it tells ACPI is what should happen (i.e., on means on and off means off)?
Some of the _UIDs are also duplicated. This change makes them unique.
A few cosmetic changes are made so that diffing cam0.asl against
cam1.asl has fewer extraneous differences.
Change-Id: I9c9f6c712b075450539d5b84ac5bb221b3cbb57e
Signed-off-by: Matt Delco <delco@chromium.org>
Reviewed-on: https://review.coreboot.org/27605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
|
|
Adapted from chromium commit 7633daa
[caroline: Change debounce time for jack insertion and ejection]
We are using max debounce time. During this time line, MICBIAS will be
zero because of jack chasis. At the moment we got 0 button (PLAY/PAUSE)
We need to reduce this time to below 100ms for caroline device.
BUG=b:79559096
TEST=see there is no more irq before jack insertion/ejection irq
complete
Original-Change-Id: Ib6abdb4ff041823ca89f74cf59e2bfa644bb0d6a
Original-Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/1143109
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Wonjoon Lee <woojoo.lee@samsung.com>
Change-Id: I8f605989d6ffc8a75127ed6722e7a37db95029ed
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27659
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On kukui board, the eMMC is routed to EC for boot ROM emulation when
loading bootblock, and should be set back to real eMMC as early as
possible after bootblock is loaded.
BUG=b:80501386
TEST=make; boots and verified BOOTBLOCK_EN_L GPIO is enabled.
BRANCH=None
Change-Id: Ifefb2e26ed048c38595907cc0875757410129828
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/27601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add 4 helper functions to get microcode info.
* get_current_microcode_rev
return the the version of the currently running microcode.
* get_microcode_rev
extract microcode revision from the given patch.
* get_microcode_size
extract microcode size from the given patch.
* get_microcode_checksum
extract checksum from the given patch.
The simpler thing would be to just move the struct microcode
to microcode.h so that the structure members can be dereferenced.
To encapsulate the structure details added the helper functions.
This information will be used in future to compare microcodes for update.
Change-Id: I67a08ba40b393874d8cc17363fefe21e2ea904f3
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/27365
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
RTC BUC control register provides a software interface to
configure the top swap feature. This patch adds implementation
to enable/disable top swap feature and gets it accessible in
romstage as well.
The top swap control functions are exposed only if INTEL_HAS_TOP_SWAP
is selected.
To use the topswap feature a second bootblock has to be added
to the cbfs. Below configs aid in doing that,
INTEL_HAS_TOP_SWAP
INTEL_ADD_TOP_SWAP_BOOTBLOCK
INTEL_TOP_SWAP_BOOTBLOCK_SIZE
Enabling and Disabling topswap, using the added API enables user
to boot alternatively from either bootblock.
Change-Id: Iea31b891f81e76d4d623fcb68183c3ad3dcadbad
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/25805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Enable power to FPMCU by default on power-on and deassert
the PCH_FPMCU_RST_ODL reset line.
BUG=b:111880258
BRANCH=none
TEST='emerge-nocturne coreboot chromeos-bootimage', flash and boot
nocturne to kernel, login and execute "powerd_dbus_suspend" at kernel
prompt, wait a few seconds, press power button to wake, then execute
"cat /var/log/cros_fp.log | grep 'Reset cause'" and assure search comes
up empty.
Change-Id: I7f8419dd58f79816f8061d0da4a0d3984c814289
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/27658
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable nocturne to wake from lid attach/detach events.
BUG=b:111803637
BRANCH=none
TEST="emerge-nocturne coreboot chromeos-bootimage", verify EC has
commit a5abbbb4eb9b15a72624dddbfd727d0b324c3f36, and verify nocturne
wakes from suspend on a lid attach/detach event.
Change-Id: I22b957d741426ca8b49d1819cf39c940f55198eb
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/27649
Reviewed-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some fields were only required during early stages of IPU3.
Remove some fields that aren't used for the current version of IPU3.
BUG:None
TEST=Launch camera app and check if it works properly.
Change-Id: I72bcba13cc353a1b16fedeb7543fbbac432fbf5d
Signed-off-by: Alan Chiang <alanx.chiang@intel.com>
Reviewed-on: https://review.coreboot.org/27617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Andy Yeh <andy.yeh@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Compile the linux devicetree using dtc and add it to CBFS.
Change-Id: I8a98ed7b128f65a6e0109963dbabca91563a315c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/26229
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
