Age | Commit message (Collapse) | Author |
|
40651: rev 00000018
306D3: rev FFFF000F
306D4: rev 00000009
Change-Id: I47a6caadc83f0ed96b0a4b0c624ad105d9dee3b6
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/204819
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit f8f0703c7042a14c6807cbea74eae6e85ba6854e)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6983
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
broadwell: Add romstage usbdebug support
Reviewed-on: https://chromium-review.googlesource.com/199412
(cherry picked from commit 1050e7d3be6ec1e4fe5aa2df408f4bb6d33a42b5)
broadwell: Add romstage code to configure PCH UART for console
Reviewed-on: https://chromium-review.googlesource.com/199807
(cherry picked from commit ecebda4eb5d6fe58473d25c2898ba1a2eac0f39a)
broadwell: Expand the PCI device convenience macros
Reviewed-on: https://chromium-review.googlesource.com/199891
(cherry picked from commit f8c54c70f136cd2cb8f977bc25661974d7e529ad)
broadwell: Add ramstage driver for ADSP
Reviewed-on: https://chromium-review.googlesource.com/199892
(cherry picked from commit e8e986b0ba52bbfc9923d71009fbd31e749ca43f)
broadwell: Update ACPI devices
Reviewed-on: https://chromium-review.googlesource.com/201080
(cherry picked from commit 2446b35578eb36e0009415bec340059135751549)
broadwell: Reserve DPR region
Reviewed-on: https://chromium-review.googlesource.com/201081
(cherry picked from commit 8ecd9d2096db2bded6f27ef6ee9a9b39ce2dfec6)
broadwell: Remove old pei_data and add cpu function for romstage
Reviewed-on: https://chromium-review.googlesource.com/201690
(cherry picked from commit d206c9cdd69519d502a90bb0595f0e3a7cb50274)
broadwell: Fixes for graphics without executing VBIOS
Reviewed-on: https://chromium-review.googlesource.com/202356
(cherry picked from commit 0c031df1ce92c875e95ddfd3f026f649c342c7fa)
broadwell: Fix compilation failure when loglevel is lowered
Reviewed-on: https://chromium-review.googlesource.com/202357
(cherry picked from commit 708ce78b2bfae5664b1238e17b086c88cac55bdc)
broadwell: Disable GPIO controller interrupt
Reviewed-on: https://chromium-review.googlesource.com/203645
(cherry picked from commit 2d17e98eded5958258ba5c0abf600284d8d03af9)
broadwell: Add support for E0 stepping
Reviewed-on: https://chromium-review.googlesource.com/205160
(cherry picked from commit 802e9d371418cc7a7fc7af131d7e5dda0ae5b273)
broadwell: misc updates for CPU driver
Reviewed-on: https://chromium-review.googlesource.com/205161
(cherry picked from commit ea1d403817ee193648f2c119fd45894e32e57e97)
broadwell: Read power state earlier and store in romstage params
Reviewed-on: https://chromium-review.googlesource.com/208151
(cherry picked from commit b2198d71084ad3c1360a0bfedc46c8dd3825bd0e)
broadwell: Add parameters to pei_data structure
Reviewed-on: https://chromium-review.googlesource.com/208153
(cherry picked from commit 423fbf67e497a907fbc8e12caf2929d4951858af)
broadwell: Move platform report output after power state is read
Reviewed-on: https://chromium-review.googlesource.com/208213
(cherry picked from commit acedf4146bf9377133433046dae1fa9c8bc69d78)
Squashed 15 commits for broadwell support.
Change-Id: I87e320d3d5376b84dd9c146b0b833e5ce53244aa
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6982
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
New microcode released this week.
Change-Id: I426d0e00d1c03650049cbe033b53a909a7d944c9
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/198896
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 63ec6438b566d14a2b878474ca068cf70d9aa9d6)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6966
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This broadwell implementation will support Haswell ULT in
addition to broadwell CPUs. Add the latest available microcode
for the broadwell C0 and D0 parts as well as Haswell ULT.
Change-Id: I1beb71e0e28af3508e2260751b6fdfe47d53d90d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/198742
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 69d5b7c834a4f52656ab14562ea913477418e588)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6965
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
broadwell: Import files from haswell/lynxpoint into soc/broadwell
Reviewed-on: https://chromium-review.googlesource.com/198425
(cherry picked from commit 178400e5709d676dd41e6a75df06faa829e0e3af)
broadwell: Unify and clean up license
Reviewed-on: https://chromium-review.googlesource.com/198426
(cherry picked from commit 30d3c25a0abc76be68477c39a654b95a5975f55d)
broadwell: pch.h: split PM into new header
Reviewed-on: https://chromium-review.googlesource.com/198427
(cherry picked from commit 97a8d0b051f476d0edc06301f57326a718df1373)
broadwell: pch.h: split RCBA into new header
Reviewed-on: https://chromium-review.googlesource.com/198428
(cherry picked from commit fa217361b28fdb8d3a3e85f070dfaf13c0d48135)
broadwell: pch.h: split SATA into new header
Reviewed-on: https://chromium-review.googlesource.com/198429
(cherry picked from commit bf8795ca92f9f0467e7869c701038abb4529ac71)
broadwell: pch.h: split SPI into new header
Reviewed-on: https://chromium-review.googlesource.com/198550
(cherry picked from commit 099af14676a2654ca3e24e66d7b9f0b4ab13cd14)
broadwell: pch.h: split SerialIO into new header
Reviewed-on: https://chromium-review.googlesource.com/198551
(cherry picked from commit 4f3c028686aed78fb07b8792dcf46aebd2268ea6)
broadwell: pch.h: split LPC into new header
Reviewed-on: https://chromium-review.googlesource.com/198552
(cherry picked from commit 10bad5bbb6739c0277fd5330d26a89d60fd5c102)
broadwell: pch.h: split GPIO into new header and clean up
Reviewed-on: https://chromium-review.googlesource.com/198553
(cherry picked from commit 9c97532460562215b78e10b011a29e092a07f3e5)
broadwell: pch.h: split USB into new headers
Reviewed-on: https://chromium-review.googlesource.com/198554
(cherry picked from commit 86ef1a45a2e5f307467b3be48e377569f37b3068)
broadwell: Split IOBP into separate files
Reviewed-on: https://chromium-review.googlesource.com/198734
(cherry picked from commit f93b8bda71728f1383937ad675d2d5fb5a927600)
broadwell: smbus: Extract common code and split header
Reviewed-on: https://chromium-review.googlesource.com/198735
(cherry picked from commit 8052030a9d6b22e8a19938fa9b93e90d08f0057d)
broadwell: Create iomap.h header with platform base addresses
Reviewed-on: https://chromium-review.googlesource.com/198736
(cherry picked from commit b35947d070b28871637dfe2b930a9f2be80958ee)
broadwell: Add header for platform PCI devices
Reviewed-on: https://chromium-review.googlesource.com/198737
(cherry picked from commit 6ac4e56db6e489bb9eaf91a0c3c543399f691500)
broadwell: Split SMM related defines/prototypes to new header
Reviewed-on: https://chromium-review.googlesource.com/198738
(cherry picked from commit 2a2595067077cd918bfd48cad79a684b8e1ff0f4)
broadwell: cpu.h: Split MSR defines to separate header
Reviewed-on: https://chromium-review.googlesource.com/198739
(cherry picked from commit 01148cd2c9edd97cd0c8ef3cfed58bc8c33eb805)
broadwell: Create romstage header file
Reviewed-on: https://chromium-review.googlesource.com/198740
(cherry picked from commit 31c91e811b9e07e7bcba6b9f8f5720a31322eb21)
broadwell: Create ram stage header file
Reviewed-on: https://chromium-review.googlesource.com/198741
(cherry picked from commit 93dde85f98d43d4a1886b59004d1bab4924ad621)
broadwell: Add reference code data interface
Reviewed-on: https://chromium-review.googlesource.com/198743
(cherry picked from commit 9059b8e2308892a48c838c3099404c9cf450df95)
broadwell: Clean up ACPI NVS region
Reviewed-on: https://chromium-review.googlesource.com/198897
(cherry picked from commit d83cc82c36661556eb1e2e437b7ac51d5b8e4a14)
broadwell: Move CTDP ACPI methods to new file
Reviewed-on: https://chromium-review.googlesource.com/198898
(cherry picked from commit fc1e711290df304d18c558d697eea8a5e57061b2)
broadwell: Split EHCI and XHCI ACPI devices
Reviewed-on: https://chromium-review.googlesource.com/198899
(cherry picked from commit 26f437b27e00dbd5c92ea22e76404633a62fb7ca)
broadwell: ACPI: Clean up SerialIO ACPI code
Reviewed-on: https://chromium-review.googlesource.com/198910
(cherry picked from commit ea3cd39566c1bb2ead463a6253b6204a62545d35)
broadwell: ACPI: Remove special handling of LPT-LP chipset
Reviewed-on: https://chromium-review.googlesource.com/198911
(cherry picked from commit 2c54df159bf6759c8f866628e83541de6f4e28f6)
broadwell: ACPI: Clean up use of base address defines
Reviewed-on: https://chromium-review.googlesource.com/198912
(cherry picked from commit 34e4788955bceff01631fd0b4dbf0aa24cf56b75)
broadwell: ACPI: Clean up and fix formatting
Reviewed-on: https://chromium-review.googlesource.com/198913
(cherry picked from commit bc0f7c6d2f95681eb987bb6ff6baf2d16cc77050)
broadwell: Add header for ACPI defines and prototypes
Reviewed-on: https://chromium-review.googlesource.com/198914
(cherry picked from commit 9951e7931942d2921f92f6e094b1cc32c190eab9)
broadwell: Add reset_system function and header
Reviewed-on: https://chromium-review.googlesource.com/198915
(cherry picked from commit 6d1efb94bd39bcd6f7e3e0de2f3299a384b109ef)
broadwell: Move PCODE MMIO defines to systemagent.h
Reviewed-on: https://chromium-review.googlesource.com/198916
(cherry picked from commit abb5f87e548fbde3a08e14a18714b4e4391c955f)
broadwell: Unify chip.h and add chip.c
Reviewed-on: https://chromium-review.googlesource.com/198917
(cherry picked from commit a9c2d7ff3afa1e2a10be85ccc72b7db0f2aaafe1)
broadwell: Rename HASWELL_BCLK to CPU_BCLK
Reviewed-on: https://chromium-review.googlesource.com/198918
(cherry picked from commit 65ac1a07abaf14eb42fec6c5df67d2d3688ad5a1)
broadwell: Clean up broadwell/cpu.h
Reviewed-on: https://chromium-review.googlesource.com/198919
(cherry picked from commit 17353803babc8ace279e105c012130678226144e)
broadwell: Clean up broadwell/systemagent.h
Reviewed-on: https://chromium-review.googlesource.com/198920
(cherry picked from commit 49d7a023f3ff04a65d16622aa9b2fa6004b693ae)
broadwell: Clean up broadwell/pch.h
Reviewed-on: https://chromium-review.googlesource.com/198921
(cherry picked from commit 17da652b4408a91fcfea99dd35fe9f9e1bdcf03b)
broadwell: Clean up management engine driver
Reviewed-on: https://chromium-review.googlesource.com/198922
(cherry picked from commit 4fce5fbb56dc4f31b77e5ada05463c043ad5be72)
broadwell: Add common CPUID and PCI Device ID defines
Reviewed-on: https://chromium-review.googlesource.com/198923
(cherry picked from commit c6bf20309f33168ea2cc4634cbda5ec242824ba8)
broadwell: Clean up and expand report_platform
Reviewed-on: https://chromium-review.googlesource.com/198924
(cherry picked from commit 5082d4824db149e867a2cd8be34c932b03754022)
broadwell: Clean up the bootblock code
Reviewed-on: https://chromium-review.googlesource.com/198925
(cherry picked from commit ba0206ab76fe0b6834a14dc57f400d139094623c)
broadwell: Clean up ramstage device and driver operations
Reviewed-on: https://chromium-review.googlesource.com/199180
(cherry picked from commit d8fc9daf129738713a5059286b7ead004f3b7569)
broadwell: Clean up XHCI and EHCI ramstage drivers
Reviewed-on: https://chromium-review.googlesource.com/199181
(cherry picked from commit d355247333a828a146ce7cf9b92a63da74119c1d)
broadwell: Clean up gpio handling code
Reviewed-on: https://chromium-review.googlesource.com/199182
(cherry picked from commit d62cef1970fe75f8166315016b3d8415cddcab20)
broadwell: Clean up the PCH generic code
Reviewed-on: https://chromium-review.googlesource.com/199183
(cherry picked from commit 3b93b3ea79965d5ac831bf9015e49330f157b0ff)
broadwell: Move get_top_of_ram() and cbmem_top() to memmap.c
Reviewed-on: https://chromium-review.googlesource.com/199184
(cherry picked from commit 68955ba4ff8b49ff466d7badaa934bd143026ba7)
broadwell: Clean up pmutil.c
Reviewed-on: https://chromium-review.googlesource.com/199185
(cherry picked from commit b6fb672ae879e17422f7449f70c3669055096f84)
broadwell: pmutil: Add new acpi_sci_irq() function
Reviewed-on: https://chromium-review.googlesource.com/199186
(cherry picked from commit 80ad8bb9bdc75f180e667861fed42a3844226bc5)
broadwell: Clean up HDA ramstage driver
Reviewed-on: https://chromium-review.googlesource.com/199187
(cherry picked from commit b4962acd706eaa66c1c3ef4d22eba313642fbb2d)
broadwell: Clean up cache_as_ram assembly
Reviewed-on: https://chromium-review.googlesource.com/199188
(cherry picked from commit 8a457b82610b604ae7f69e2500815ce411c2d02d)
broadwell: romstage: Separate stack helper functions
Reviewed-on: https://chromium-review.googlesource.com/199189
(cherry picked from commit c220383c90466fc2dbf4b6107679b08ecb4aadad)
broadwell: Add function to read WPSR from SPI
Reviewed-on: https://chromium-review.googlesource.com/199190
(cherry picked from commit 935404da1157d606b913eff6c2635ae898e9980a)
broadwell: Clean up SMBUS code in romstage and ramstage
Reviewed-on: https://chromium-review.googlesource.com/199191
(cherry picked from commit 6ae9d93c1a6f14da6429a4e5b01619c9ccaefdaa)
broadwell: SPI: Clean up romstage and ramstage code
Reviewed-on: https://chromium-review.googlesource.com/199192
(cherry picked from commit 28ffd71a416aee2ab54bc5d782cfeef31d4d30bf)
broadwell: Clean up PCIe root port ramstage driver
Reviewed-on: https://chromium-review.googlesource.com/199193
(cherry picked from commit 781f3a1b72c72f0bb05f5524edec471ad13ec90e)
broadwell: Clean up minihd ramstage driver
Reviewed-on: https://chromium-review.googlesource.com/199194
(cherry picked from commit a52d275e41fdcbf9895d07350725609d9be1ff0e)
broadwell: Update romstage main to follow baytrail format
Reviewed-on: https://chromium-review.googlesource.com/199361
(cherry picked from commit 0678c739af84c871922ffba5594132b25e471ddd)
broadwell: Add CPU set_max_freq function for romstage
Reviewed-on: https://chromium-review.googlesource.com/199362
(cherry picked from commit 68b0122472af27f38502d42a8a6c80678ddbbba6)
broadwell: romstage: Add chipset_power_state implementation
Reviewed-on: https://chromium-review.googlesource.com/199363
(cherry picked from commit 761cec3b6bb9bde579c3214f3f1196f65700757c)
broadwell: romstage: Convert systemagent init to reg_script
Reviewed-on: https://chromium-review.googlesource.com/199364
(cherry picked from commit c2ea2d3a0c7555a353fb9a1d4a63e773ac8961b2)
broadwell: romstage: Convert pch init to reg_script
Reviewed-on: https://chromium-review.googlesource.com/199365
(cherry picked from commit 4383de5846e97ca5aee6dd210459d8dba0af981c)
broadwell: elog: Use chipset_power_state for events
Reviewed-on: https://chromium-review.googlesource.com/199366
(cherry picked from commit 0ef5961ebe3a7037d5fbe361fbc70a87ac2edad9)
broadwell: Clean up SATA ramstage driver
Reviewed-on: https://chromium-review.googlesource.com/199367
(cherry picked from commit ffa5743f74551bd48aa7e5445ce7cd9dc7b07ce8)
broadwell: Update ramstage graphics driver to support broadwell
Reviewed-on: https://chromium-review.googlesource.com/199368
(cherry picked from commit bb01deb8bbed56f15e1143504e4cf012ecf5a281)
broadwell: Update raminit to follow baytrail layout
Reviewed-on: https://chromium-review.googlesource.com/199369
(cherry picked from commit 3f25c23dc58f85d2521916cd6edbe9deeeb8d523)
broadwell: Update and unify the finalize steps
Reviewed-on: https://chromium-review.googlesource.com/199390
(cherry picked from commit ddc4c116b42d38dfdfc45ef4388fbfab32ca48fa)
broadwell: Clean up SMM code
Reviewed-on: https://chromium-review.googlesource.com/199391
(cherry picked from commit 8295e56c9b643fd4b9267d70b5efd0cf94dd67dd)
broadwell: Clean up LPC ramstage driver
Reviewed-on: https://chromium-review.googlesource.com/199392
(cherry picked from commit 28326aeaaf304c9262866588d91b79b37d1d9a2e)
broadwell: Clean up systemagent ramstage driver
Reviewed-on: https://chromium-review.googlesource.com/199393
(cherry picked from commit 749988fff07eab8d2c9ebc731e3ed9e427b3f7b3)
broadwell: Move C-state configuration information to acpi.c
Reviewed-on: https://chromium-review.googlesource.com/199394
(cherry picked from commit 198a3cd5cbd009be406298cbb53163f075fe9990)
broadwell: Clean up CPU ramstage driver
Reviewed-on: https://chromium-review.googlesource.com/199395
(cherry picked from commit 8159689bba479bab6fd2e949e3e1c3f817088969)
broadwell: Do not reserve SMM relocation region
Reviewed-on: https://chromium-review.googlesource.com/199402
(cherry picked from commit e2ab52340e3d3a97a3f8dbdad8fac9f7769d1b4c)
broadwell: Add an early ramstage driver
Reviewed-on: https://chromium-review.googlesource.com/199403
(cherry picked from commit c7a8c867101b49a7f9f17ec1a8777a8db145f3e3)
broadwell: Support for second reference code binary
Reviewed-on: https://chromium-review.googlesource.com/199404
(cherry picked from commit abb99b36e97c4f739b23abed6146fea370bbbec2)
broadwell: Clean up serialio init code
Reviewed-on: https://chromium-review.googlesource.com/199405
(cherry picked from commit e09a1f8520a7b72451a1e2068b200f7c5451f489)
broadwell: acpi: Add function to fill out FADT
Reviewed-on: https://chromium-review.googlesource.com/199406
(cherry picked from commit 7e58f43e46d4382cf4541057f81fe6be3e4d6e74)
broadwell: Update C-state table creation
Reviewed-on: https://chromium-review.googlesource.com/199407
(cherry picked from commit 68b1f70e32e1d0c6fc4332dce402ad78334e0063)
broadwell: acpi: Clean up acpi table creation code
Reviewed-on: https://chromium-review.googlesource.com/199408
(cherry picked from commit 49088b312b159bb17a9330eda6a88d6f324ea146)
broadwell: acpi: Add ACPI table create helper functions
Reviewed-on: https://chromium-review.googlesource.com/199409
(cherry picked from commit 344c3c511d0341457525ef4d6eb70201404fc62c)
broadwell: Add soc/intel/broadwell Makefiles
Reviewed-on: https://chromium-review.googlesource.com/199410
(cherry picked from commit ea8f97738eadd3b0b6a642754df7a7d22e547ffc)
broadwell: Add Kconfig for broadwell soc
Reviewed-on: https://chromium-review.googlesource.com/199411
(cherry picked from commit 8c99038a5c20812497619134c66d45bc4f21c8fe)
Squashed 78 commits for broadwell that form a solid code base.
Change-Id: I365ca9a45978b5e0cc5237f884e20a44f62a0e63
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6964
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This is common code for Intel SOC that can be shared.
Change-Id: Ic703f36f56a8238d5cc1248b353d8c3a49827a9a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/196264
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 3a9057b9616c54a8404eee55511743d2492dbc28)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6968
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This common code can be shared across Intel SOCs.
Change-Id: Id9ec4ccd3fc81cbab19a7d7e13bfa3975d9802d0
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/196263
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit f9919e2551b02056b83918d2e7b515b25541c583)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6967
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
baytrail: Change all GPIO related pull resistors from 10K to 20K
Reviewed-on: https://chromium-review.googlesource.com/187570
(cherry picked from commit 762e99861dd1ae61ddcf1ebdec8e698ede54405e)
baytrail: workaround kernel using serial console on resume
Reviewed-on: https://chromium-review.googlesource.com/188011
(cherry picked from commit b0da3bdb5b6b417ad6cab0084359d4eae1cb4469)
baytrail: allow dirty cache line evictions for SMRAM to stick
Reviewed-on: https://chromium-review.googlesource.com/188015
(cherry picked from commit 50fb1e6a844e1db05574c92625da23777ad7a0ca)
baytrail: Optionally pull up TDO and TMS to avoid power loss in S3.
Reviewed-on: https://chromium-review.googlesource.com/188260
(cherry picked from commit e240856609b4eed5ed44ec4e021ed385965768d6)
rambi: always load option rom
Reviewed-on: https://chromium-review.googlesource.com/188721
(cherry picked from commit d8a1d108548d20755f8683497c215e76d513b7a9)
baytrail: use new chromeos ram oops API
Reviewed-on: https://chromium-review.googlesource.com/186394
(cherry picked from commit f38e6969df9b5453b10d49be60b5d033d38b4594)
rambi: always show dev/rec screens on eDP connected panel
Reviewed-on: https://chromium-review.googlesource.com/188731
(cherry picked from commit 7d8570ac52f68492a2250fa536d55f7cbbd9ef95)
baytrail: stop e820 reserving default SMM region
Reviewed-on: https://chromium-review.googlesource.com/189084
(cherry picked from commit 6fce823512f5db5a09a9c89048334c3524c69a24)
baytrai: update MRC wrapper header
Reviewed-on: https://chromium-review.googlesource.com/189196
(cherry picked from commit 36b33a25b6603b6a74990b00d981226440b68970)
rambi: Put LPE device into ACPI mode
Reviewed-on: https://chromium-review.googlesource.com/189371
(cherry picked from commit 5955350cd57fd1b3732b6db62911d824712a5413)
baytrail: DPTF: Enable mainboard-specific PPCC
Reviewed-on: https://chromium-review.googlesource.com/189576
(cherry picked from commit 27fae3e670244b529b7c0241742fc2b55d52c612)
baytrail: Add config option for PCIe wake
Reviewed-on: https://chromium-review.googlesource.com/189994
(cherry picked from commit 1cc31a7c021ec84311f1d4e89dd3e57ca8801ab5)
rambi: Enable PCIe wake
Reviewed-on: https://chromium-review.googlesource.com/189995
(cherry picked from commit c98ae1fee54cfb2b3d3c21a19cdbbf56a0bfa1e6)
Squashed 13 commits for baytrail/rambi.
Change-Id: I153ef5a43e2bede05cfd624f53e24a0013fd8fb4
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6957
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Change-Id: Ic9734bf2672942a09f2136b0c066f2eda58486d9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7126
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Iee581183f9cd9f5fecd5604536b735f6a04a0f93
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7019
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
Change-Id: Ic8472745c2ff0c68fd63b51d1a149a11be1650e9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7047
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: If973f28931e65a57cbb8d6739542a57c844f0d66
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7115
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: Ic08f1f2fdbcf6164eb1a0330f9134da3fdb978d7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7114
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Remove northbridge specific callouts for AGESA_READ_SPD.
Move low-level SMBus code to southbridge.
Change-Id: I5fc91c49d9ef8e0af1c4d8194f857c61ce417d1d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7113
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Remove northbridge specific callouts for AGESA_READ_SPD.
Move low-level SMBus code to southbridge.
Change-Id: I3e272389e2a7db542fb48fca8606325af27b65a5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7112
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: If5c62b868c4144845d79dc26068c500ab5d26947
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7111
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
These allocations are not really part of write_tables() and the move
opens possibilities to use CBMEM instead of SPI Flash to restore some
parts of system state after S3 resume.
Change-Id: I0c36bcee3f1da525af077fc1d18677ee85097e4d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7097
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Placement of romstage stack in RAM was vulnerable for getting corrupted
by decompressed ramstage.
Change-Id: Ic032bd3e69f4ab8dab8e5932df39fab70aa3e769
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7096
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: I84ee953196ae9bed3392c2b9bab2e8d9f0d27908
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7095
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: Ie8e4fffcec308d1cd5e696605e78671f3ababf40
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7054
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ia3f6691ae7c33b5e22010e25a1f01996a594196e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6943
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Id90db4f6ce1a5fb506c81bc3a6010d85b0aa8c43
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6940
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I00d0d0e2556d4cd0553a2b3351ace26bf747ff6a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6944
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Just took combined sandybridge per-device ACPI patch and applied it
on FSP flavour to avoid need of separate tests.
Change-Id: I09838cc01ede504416078edcb1c267a11539e714
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7044
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I4cf0a67b0251d2d3adff5de74bf56b7d4c4524ee
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6811
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
A cast did not work for me, but this variable did.
This is one of the many issues with building e3501 I'm
running into.
Change-Id: Ifb19a17770604f2d63dfef762d08200add77ee34
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/7122
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Two issues:
1. without config, there were two NULL derefs
2. output for "Secondary" looked at ide0_enable
Change-Id: I34ddbc0f9b27226981ccbc237e3d59e522076d55
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6989
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
"AMD\t " isn't 8 characters long.
Change-Id: I47b2a39d7dca0201b7ee5dfd1f77e0714411257c
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6991
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de>
|
|
Change-Id: I706891b9408cf14b559ef228766c04e98345ff6e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6938
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I076cba7d21926cabf90d485de50268ae40c435f3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7087
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Native raminit for sandy/ivybridge was introduced in:
7686a56 sandy/ivybridge: Native raminit.
An additional current level is needed.
Change-Id: Ied73d168045c25d37afa5d9d7073de7f9c6435c7
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: http://review.coreboot.org/7098
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I5c8a689a4923175fff1f38847b7cfbbaeeb0ea22
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/7092
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ieb23728ba171733820830e86e77a4c6d8e1cc57d
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/7101
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Without this patch the laptop powers down after resume.
Change-Id: Ic6486fd4c4cc55b1ac5695f9d6d83fc2193b7eba
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/7102
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Change-Id: Ieeefbe4617ea6c131236d8c94e9990f7b797192b
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/7103
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
This amdfam10 board was by mistake modified with commit
b6f3da4 AGESA CIMx: Move late init out of get_bus_conf()
Change-Id: I8edf6f7f4cc635d31e7e485e3f6de57ef8ed7b1e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7104
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
As introduced in:
1783a3c ivybridge: LVDS gfx init.
The panel on the T520 is a LP156WD1 40 pin LVDS (2 ch, 6-bit).
Tx parameters derived from datasheet table.
Change-Id: Ib733836e3233a7f14a79f36a27ed36b638e837f5
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/7100
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
It's specific to butterfly. Doesn't do anything on lenovos.
Change-Id: I98b7c3199de5d8515bd869936e1b95847321d264
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/7099
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
This patch adjusts the read timeout in order to support flash chips
which needs more than 60ms to complete a spi command.
This problem can be reproduced on a Thinkpad T520 with M25PX64 spi chip ( suspend to ram bug ).
Change-Id: I22b2e59f1855ead6162a292b83b9b854b55c0235
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: http://review.coreboot.org/7105
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Change-Id: I4ed04ecbc9e11200577cc2b6ede0e05af9f346fa
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7082
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Change-Id: I2d946b9d757cc6158ff7f8927a81d7bf03a2e062
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7084
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I74943d0248f49796b9d31d6ed827c69f8cea13a5
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7090
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I387bb6154fe432ef2fc5f92faca69e67d7a6370a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7083
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Move generic options to the "General Setup" menu.
Move device specific options to the "Devices" menu.
Change-Id: I514a021305d43f026b24fd3016477300700ed401
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7089
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Iea035f80695623e4e8d53eea7e3ec294d868fb5b
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7053
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I29c7d367df7d1ce911f6cd7ed5e5c56865b41dcc
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7063
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Support added for Micron N25Q128 SPI flash, which has
the same manufacturer id as ST Micro. Jedec ID =
0x20 0xBB 0x18. Since existing stmicro.c only compares
the last device id byte, this flash is mistakenly
identified as M25P128, which has ID = 0x20 0x20 0x18.
To handle this situation and avoid breaking code for
existing devices, a two byte .id member is added.
New devices should be added to the beginning of the
flash table array with .idcode = STM_ID_USE_ALT_ID and
.id = the two byte jedec device id.
A 4KB subsector erase capability is added and used for
this new device. It requires using a different SPI
op-code supported by adding .op_erase member. Previous
devices defined in stmicro.c are assigned their original
op-code for 64KB sector erase.
N25Q128 is now working on a custom designed Bayley Bay
based board. Tested by verifying the MRC fastboot cache
is successfully (re)written. Note that previous devices
were not retested.
Change-Id: Ic63d86958bf8d301898a157b435f549a0dd9893c
Signed-off-by: Scott Radcliffe <sradcliffe@microind.com>
Reviewed-on: http://review.coreboot.org/7077
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I6189930fd3c69c3497e4cf1a78035e6614761b13
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6923
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Iac53462ab3621d96ba15e2fde2800212584246db
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7072
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Nowhere in database p_state_num is set. So this whole function ends up
being a noop. Moreover the offsets used by it are wrong with any
optimizing iasl. Remove it in preparation of move to per-device ACPI.
Change-Id: I1f1f9743565aa8f0b8fca472ad4cb6d7542fcecb
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7012
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I04b485945a1830deaf5a695507ea81809edbceeb
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7073
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I2a9960861465f4686113213d5e5793333b6274b2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7079
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I179a4cede2f826f72a400208748798737216c01a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7071
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
We had lots of casts that caused warnings when compiling on RISCV.
Clean them up.
Change-Id: I46fcb33147ad6bf75e49ebfdfa05990e8c7ae4eb
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/7066
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I5499a99cec82b464c5146cfc2008d683d079b23a
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/7068
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I4b55b635cc233a9d48b284623399277d941b0d5a
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/7069
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
This really is not critical but we might as well get it right.
Change-Id: Ifec1e8dc35d7f5bb89d9a7a877d82410c83a3288
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/7070
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ia85e3b588c0e255e5c0f77114f051130596ce8d5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6922
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I9ba1fa5f9ad38cb619466c6199eacd219bc53281
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6921
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I6d4178e5aaffc1330b0953b0601bf6b448250a8e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6920
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
It's specific to butterfly. Doesn't do anything on lenovos.
Change-Id: I7b607196733225eace0f5e70b4cc02651488aa74
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6841
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I485791015aa7eaabba53813945c216f5725554b1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6948
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
As currently many systems would be barely functional without ACPI,
always generate ACPI tables if supported.
Change-Id: I372dbd03101030c904dab153552a1291f3b63518
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4609
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: Iee3ee33ca58b8c722d2d38aae31e7130032512ad
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6804
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: Ib04b03b2dc2ad3bfa886b43df9dd6518bbb46e3f
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6803
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
The offset of the device_nvs in the gnvs struct is expected to be
0x1000. It is actually 0x100 so padding is needed to move device_nvs
to the expected location. ACPI references to device_nvs objects will
be correct with the padding.
This was tested using a Micro Industries customized Baytrail-I board
based on the Intel Bayley Bay CRB. In intel/baytrail/nvs.h, there's
a Google customized structure located at 0x0100-0x0FFF that is
removed from the fsp_baytrail/nvs.h which explains the mismatch here.
Change-Id: I4721a79b53b5b3345ff9b0c053bdd31d2cf9cb61
Signed-off-by: Scott Radcliffe <sradcliffe@microind.com>
Reviewed-on: http://review.coreboot.org/7038
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
ACPI globalnvs.asl expects the gnvs memory area size to be 0x2000.
Padding has been added to device_nvs struct to reserve the full
0x2000 bytes for gnvs usage.
No known issues are caused by having the GNVS area shorter than
what ACPI thinks. Since there's nothing defined in this area,
O/S shouldn't try to access it. Only problem might be if O/S
notices the SSDT is located within the GNVS defined area.
I verified that the next table written to memory (SSDT) is 0x2000
past GNVS start using a custom-designed Baytrail-I motherboard
based on the Intel Bayley Bay CRB.
Change-Id: I9792954c7a3403eba6f37d7e53ea4a9ed3a2e4ac
Signed-off-by: Scott Radcliffe <sradcliffe@microind.com>
Reviewed-on: http://review.coreboot.org/7039
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Zero out the GNVS area so that uninitialized portions are defined.
Tests using Microsoft Windows (XP/7/8) gave a bluescreen bugcheck: A5
(ACPI_BIOS_ERROR) with the first parameter (0x00001000)
(ACPI_BIOS_USING_OS_MEMORY). Some ACPI enumerated devices use the
GNVS area to define whether they're enabled and their MMIO regions.
On my custom baytrail-based board and build, these devices were
disabled but GNVS had uninitialized data indicating the devices
were enabled with improper MMIO regions.
Should investigate further to see where the GNVS device values are
set if enabled and make sure they're set to valid values even when
the devices are disabled via the mainboard/devicetree.cb.
Change-Id: I2b575c65bfaab58ae6206ac6f457c259c27a7d97
Signed-off-by: Scott Radcliffe <sradcliffe@microind.com>
Reviewed-on: http://review.coreboot.org/7040
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
It's harmless but useless.
Change-Id: Iaaa5f6933d120a2071b2e32e62e36e63afa96be3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7043
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Tested-by: build bot (Jenkins)
|
|
It's useless and error-prone.
Change-Id: Ie385e147d42b05290ab8c3ca193c5c871306f4ac
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7018
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Windows chokes if it's not the case.
Change-Id: I3df15228ed00c3124b8d42fc01d7d63ff3fe07ba
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7017
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
With handling of this section removed it confused the linker.
Change-Id: Id096c1642c0bfed1007a4b7d7dfa89f8b4ffcae1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7042
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Change-Id: Ic63fc1f933fff5cd58adcd4299c4ac2a62c4bb68
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6941
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
According to ACPI spec all SSDTs should have distinct OEM table ID.
We end up with 2 SSDTs named "COREBOOT". Fix this.
Change-Id: I01bccb72758baf51c6b4263778716f4bb9d438c9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7016
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: I672c3ca9e7f30a21330cf1920a25b1ab38b3f282
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7015
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Otherwise "reserved" fields end up with a garbage instead of predictable
value.
Change-Id: I8a036769a8f86f1d6752651601de2800f4f1bd00
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7014
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Fix the error 'implicit declaration of function
"southcluster_smm_save_gpio_route"', when SMM module is added.
Change-Id: Ia050ab7e2b036541537b645d3fe4dc747cd1dff8
Signed-off-by: Kayalvizhi Dhandapani <kayalvizhid@ami.com>
Reviewed-on: http://review.coreboot.org/7024
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
Change-Id: I6d8622c7f343619b915442d8056aa6672dfc4f6e
Signed-off-by: Kayalvizhi Dhandapani <kayalvizhid@ami.com>
Reviewed-on: http://review.coreboot.org/7025
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
With SMM enabled the boot stopped while patching up global NVS in DSDT.
The cause is that both CPUs are assigned the same SMBASE address.
So update the "cpu_smm_do_relocation()" function so that each
CPU gets a different SMBASE address
Based on rmodule work that wasn't propagated to the FSP
version: commit 3eb8eb7eba55cdfd64c8d50181ea066526ff6485
Change-Id: I77cd27d3a4f207411a689b5be572b4406a03f16b
Signed-off-by: Kayalvizhi Dhandapani <kayalvizhid@ami.com>
Reviewed-on: http://review.coreboot.org/7026
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
The static library builder for the stub that interfaces to the
AGESA binary does not include config.h and kconfig.h, so any
header file changes that depend on Kconfig variables fail. Force
these two system headers to be included in the build of any AGESA
stub files.
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Change-Id: I2e8d38fa5aa21cc31b995ee3abe68ab3c3c55a68
Reviewed-on: http://review.coreboot.org/6979
Reviewed-by: Martin Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins)
|
|
In E-EDID (EDID v1.3), Monitor Name (0xfc) and Monitor Range Limits (0xfd) are
always required. However, some panels do not really have these fields. As a
workaround (and since we don't really use these fields), we only print warning
messages for that case.
Change-Id: I81b1db7d7f6c6f9320a862608dec4c7be298d7db
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193742
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit c633215ef8342664d9a4478e821fc8aad368b7f3)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/7009
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
On non-x86 systems, the location of the preram CBMEM console may not be in a
predictable place relative to other things in the linker script. That makes it
difficult to work with as its own section because the linker will complain if
you try to move backwards as it lays out memory. If the console header is
treated as an actual blob of memory which has to be put in the image, we'd
have to predict where to put it so that it isn't before something with a lower
address or after something with a higher address. Symbols, on the other hand,
can be defined arbitrarily.
Change-Id: I3257b981eee0c15bb997a9f2c55a03494c6ec6f0
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/193164
Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit a492761c27076bcac080013d509ae4aafd6dc3e3)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/7013
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Typically assert.h should provide assert().
Change-Id: I465f4a616b212f7b00d445c575866b13eecfa6fb
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/187410
Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 3990584ac8e1ec9b3838bd9dfdf8a9cb2d20fbd0)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/6961
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Copied (and unmodified) the minimal bits from ChromeOS libVPD:
https://chromium.googlesource.com/chromiumos/platform/vpd
Old-Change-Id: Id75d1bfd16263ac1b94c22979f9892cf7908d5e6
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/187411
Reviewed-by: Yung-chieh Lo <yjlou@chromium.org>
(cherry picked from commit a10ca23686299f3fd5b639631242cadaa2ca9e8a)
vendorcode: Update ChromeOS VPD Parser.
Merge recent changes in ChromeOS VPD that allows non-memory-mapped firmware
to load VPD easier and faster (ref:
https://chromium-review.googlesource.com/188134 ).
Old-Change-Id: I3ee0b89c703f476f3d77cdde52cc7588724f7686
Reviewed-on: https://chromium-review.googlesource.com/188743
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yung-chieh Lo <yjlou@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 03f4d521a7fa711b963b0e1822e92eac16a691b1)
vendorcode: Access to ChromeOS VPD on default CBFS media.
The new function "cros_vpd_gets(key, buf, size)" provides an easy and quick way
to retrieve values in ChromeOS VPD section.
Old-Change-Id: I38e50615e515707ffaecdc4c4fae65043541b687
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/187430
Reviewed-by: Yung-chieh Lo <yjlou@chromium.org>
(cherry picked from commit bcd3832c06e8ed357c50f19396da21a218dc4b39)
Squashed 3 related commits for a ChromeOS VPD parser.
Change-Id: I4ba8fce16ea123c78d7b543c8353ab9bc1e2aa9f
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6959
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I1508f3d3c56cb9afbf4a23355831549552a62866
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6891
Tested-by: build bot (Jenkins)
Reviewed-by: Kevin O'Connor <kevin@koconnor.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
It is hard to see where things are coming from without correct headers.
Change-Id: I8e2195b101501ffd25464196283fb2bddb5b8f51
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5980
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
There is a status bit for this event in most intel chipsets that
we can read and report. Start by adding the new event type.
Change-Id: Ib06411e3b87a1d069fb469943dd445bee6c1291f
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/199370
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 386a06170ec5afb31d0fe93ace3afbaab897a598)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/7004
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
baytrail: Add 811 microcode for C0 parts
Incorporate 811 microcode version for C0 stepping parts.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Old-Change-Id: Ic34c233df28fa2c94db3a886faad8239a05f475d
Reviewed-on: https://chromium-review.googlesource.com/191693
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 57c9cbdb9e4bb1cf721849ace8958eb6ec032594)
baytrail: Add 813 microcode for C0 parts
Incorporate 813 microcode version for C0 stepping parts.
Old-Change-Id: I513ce5cc1470fa0154bee088547c5cb8a5902fb5
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/195200
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit bf15a48c6bd71c2b0ab91530713afb26e139ad9c)
baytrail: Update microcode to version 816
Version 816 of microcode.
Old-Change-Id: I868702ec94a265013bb5e378a2345ff1cf0dc364
Original-Change-Id: I9a9cacf2d16bdabdb7ec84607bf6c96e4ac3f3c4
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/197692
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 16512b09e399c05cf42694854277aa7f1753e49e)
Squashed 3 successive updates for baytrail C0 microcode.
Change-Id: I76714ae636b119348e6bb9f8a4639c68be32ba3a
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/7000
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Replace it with the existing #define
Change-Id: I6e67ed1a455cd4f9eeed1865b9ef981e7ef0a874
Found-by: Idwer Vollering
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6992
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Also replace magic number with already existing #define
Change-Id: I64d22aca185bf43ff0ac126584b41920182a1112
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6990
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
These have apparently never been used because they are
incorrect.
Change-Id: I3624cb2548a0ee3da56a2cca62ed50b0dfbf7817
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/196266
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit bc0187702061fe326422c070c592a18cd93de723)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6999
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
EDID v1.4 has changed some fields (0xfc - Monitor Name, 0xfd - Monitor Range
Limits) to optional so we need to list the requirements explicitly instead of
sharing v1.3 requirements.
Change-Id: I5c7ca06893bd20e178bc35164c4ca639c881e00b
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193013
(cherry picked from commit 2ad598b8bd620117e70e13347365d74a7c6b87ef)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6998
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The detail block may contain timing descriptor, or other fields like monitor
descriptor, so we should return 1 in detailed_block function when a valid
structure is found, otherwise for any EDID containing monitor descriptor we will
see following error messages:
EDID block does not conform at all!
Detailed blocks filled with garbage
Change-Id: Ib4e91d648741e5b54a558d53a1152273c7341427
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193002
(cherry picked from commit a1f212d6aaa14d5f795beeabdb8b7b8a79578c33)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6997
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The ASCII Data String in EDID Monitor Descriptor (3.10.3) is "Stored as ASCII,
code page #437" and may contain special characters like '-'. The isalnum check
should be removed.
Also, the "Monitor Name" (0xfc) does not need to always end with 0Ah, so the
name_descriptor_terminated should be replaced by has_valid_string_termination.
Change-Id: I12a670237e12577fc971c0fbd9b2a61c82040ad3
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193001
(cherry picked from commit 671f82fd5963e32e72d3886aa242cb3e8519f226)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6996
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Skeleton for storm mainboard
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/190724
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit ba371d410768fae169da929a23c40139d26a55d3)
Removed 'select ARCH_ARM' and added 'select BOARD_ROMSIZE_KB_1024' to
the Kconfig.
Change-Id: I55c0ad6a47515ba4124b99a69d5776db2365f06e
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6975
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
When parsing "extensions", we should skip the first EDID (main) block and start
from offset 128 (EDID may have only main block, so an EDID without any
extension is fine) because the header format for main block and extensions are
different.
Without this we will see "Unknown extension block" on all EDIDs, and seeing an
error (1) return value for EDIDs without extension.
Also, after the first "unknown" error is fixed, we can now collect all return
values from parse_extension, and return an error when any of the extensions are
wrong (not just last one).
Change-Id: I0ee029ac8ec6800687cd7749e23989399e721109
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193011
(cherry picked from commit fdf0cc2e9573c19b550fa2b5e4e06337b114f864)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6995
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Some lines in decode_edid have incorrect indent levels.
Change-Id: Icc9cb57ff8dd2e2056599b3dc733fe5ac4e41c16
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193010
Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 3211ac0a29a037c5414f9ed1736c8f7822ad116b)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6994
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Iec0397a981c31c8af3def04b8c170884f79a50cc
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: http://review.coreboot.org/6871
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This enables S3 Suspend / Resume support for MinnowMax board
using Intel's Bay Trail FSP
Tested resume from Power Button and Magic Packet.
Change-Id: I021122a68c05f2e725cabb8f3946249afe802bbe
Signed-off-by: Mohan D'Costa <mohan@ndr.co.jp>
Reviewed-on: http://review.coreboot.org/6972
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins)
|
|
This adds S3 Suspend / Resume support to Intel's Bay Trail FSP
It is based on the "src/soc/intel/baytrail/romstage/romstage.c"
implementation.
Change-Id: If0011068eb7290d1b764c5c4b12c17375fb69008
Signed-off-by: Mohan D'Costa <mohan@ndr.co.jp>
Reviewed-on: http://review.coreboot.org/6937
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins)
|