summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2024-11-30Treewide: Remove unused header filesMartin Roth
These header files do not seem to be used in coreboot. Presumably they're left over after the code that used them was removed. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ide70239c7c2e93fff548d989735450396308c62b Reviewed-on: https://review.coreboot.org/c/coreboot/+/85370 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-11-29mb/siemens/mc_ehl5: Use clrsetbits macro for register accessMario Scheithauer
The code is simplified by using the mmio.h macros clrsetbits. Change-Id: Iab71ab4d6e8b6c38e07641dae3b38093690543e8 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85325 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-29mb/siemens/mc_ehl5: Limit eMMC speed mode to DDR50Mario Scheithauer
Due to layout restrictions on mc_ehl5, the eMMC interface is limited to operate in DDR50 mode. The alternative modes SDR104 and SDR50 are not supported. Limit the capabilities in the eMMC controller to DDR50 mode only so that the eMMC driver in OS will choose the right mode for operation even if the attached eMMC card supports higher modes. BUG=none TEST=Boot into Linux and check dmesg output for mmc modes Change-Id: Ie3214bc3e25e7af706a5c96244d0be50f4bb3094 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2024-11-29mb/siemens/mc_ehl5: Provide static function for disabling SDR modesMario Scheithauer
As the functionality is required for other devices, it makes sense to provide a function for this. Change-Id: If1f070eebd365de93d4bce13d5201045d3306b17 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2024-11-29mb/siemens/mc_ehl5: Rename SDIO converge layer register definesMario Scheithauer
As the registers for SD-Card and eMMC are identical, the names of the register defines should also be kept more general. Therefore change the defines from 'SD_' to 'MMC_'. Change-Id: I2e0839a00f1b097f92f4f7774d973196d2d0e9a3 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85313 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-29soc/mediatek/mt8196: Reserve 70 MB memory for OP-TEEJarried Lin
Reserve 70MB memory space for running the OP-TEE image. BUG=b:317009620 TEST=build pass Change-Id: I6f75870bdd76e89866508d351b04a0921f30fe4d Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85249 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-29mb/google/fatcat: Modify the kconfig file in felino variantTongtong Pan
kconfig incorrectly builds fatcat instead of feilino. Modify the kconfig file to successfully compile felino. BUG=b:379797598 TEST=1. util/abuild/abuild -p none -t google/fatcat -x -a make sure the build includes GOOGLE_FELINO 2. Run part_id_gen tool without any errors Change-Id: Icd76fa97b9879d8f90ae9ee13998b6667f10b39c Signed-off-by: Tongtong Pan <pantongtong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85315 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pranava Y N <pranavayn@google.com>
2024-11-29mb/google/fatcat/var/felino: Modify the overridetree fileTongtong Pan
Modify overridetree based on the schematics revision 20241120. BUG=b:379797598 TEST=abuild -v -a -x -c max -p none -t google/fatcat -b felino Change-Id: I40362b5c823144b6ab0acb878e58b4f5a295bbdd Signed-off-by: Tongtong Pan <pantongtong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-29mb/google/fatcat/var/fatcat: Remove TcssAuxOri overrideSubrata Banik
The TCSS configuration now relying on the PD<->PMC communication for the fatcat board. This removes the need to override the `TcssAuxOri` UPD setting. TEST=Booted fatcat successfully. Verified USB-C device detection and functionality on both TCSS#0 and TCSS#1 ports. Change-Id: I37d5c6fe68ad529b4da46aad460e5c1bf92179a8 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pranava Y N <pranavayn@google.com>
2024-11-28mb/google/zork: Update FP enableJon Murphy
Add/update FP enable/disable based on SKU ID. This is meant to resolve a UMA issue with devices that had the FPMCU populated on non-fp devices. Since the FPMCU is present, and the firmware enables the power GPIO's based on variant, not SKU, the devices were reporting data on fingerprint errantly. Specify the SKUs which should not have a FP sensor and default to true to maintain the legacy behavior for undefined devices and limit risk. Variants which do not have FP SKUs will be unaffected. BUG=b:354769653 TEST=Flash to zork, test FP. Disable test SKU, flash on zork, test FP. To test, run `ectool --name=cros_fp version` in the shell When enabled, the fpmcu fw version should be displayed. When disabled, an error should be displayed because the fpmcu is inaccessible. Change-Id: Ic6dc71013a1c0d5ee5263109eed87a1b31800232 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85294 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-28arch/riscv: Refactor SMP codeMaximilian Brune
Currently only a fixed number of harts/cores can be detected. This patch adds a Kconfig option which allows to detect the number of harts at runtime if a SOC or mainboard has a scheme to do so. As part of that patch SMP logic has been mostly moved to smp_resume, since it is easier to debug issues at the time smp_resume is called than it is at smp_pause, since the serial is usually not present at the time of the first smp_pause call. Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: Icc53185991fed4dbed032a52e51ff71d085ad587 Reviewed-on: https://review.coreboot.org/c/coreboot/+/81082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alicja Michalska <ahplka19@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2024-11-28arch/riscv: Allow adding OpenSBI as external blobMaximilian Brune
The reasoning is that even though vendors currently tend to open source their OpenSBI implementation, they often do so in their own repository. So instead of adding all possible source repositories as submodules, we shall allow specifying a path to an already compiled OpenSBI ELF file. This is similar of what we currently do on ARM64 with the BL31 binary. Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: I6592ad90a254ca4ac9a6cee89404ad49274f0dea Reviewed-on: https://review.coreboot.org/c/coreboot/+/83284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alicja Michalska <ahplka19@gmail.com> Reviewed-by: ron minnich <rminnich@gmail.com>
2024-11-28soc/mediatek: Eliminate redundant calls to get_pmif_controller()Yidi Lin
It is unnecessary to look up PMIF controller by mstid in multiple functions. Just pass `arb` to these functions in order to avoid redundant calls to get_pmif_controller(). BUG=none TEST=compiled Change-Id: I907d6ff029827e4afe4f1d05e39c8dd662c7c45e Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85327 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-28mb/google/rex/var/kanix: Set GPP_V14 to NCTyler Wang
Follow schematic(ver.1122A), set GPP_V14 to NC. BUG=b:380218793, b:366291025 TEST=emerge-rex coreboot pass Change-Id: I91abc4e07836abb163c8bb28d54a711d2b25375d Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-28mb/google/rex/var/kanix: Add LAN RTL8125BG related settingsTyler Wang
Add LAN RTL8125BG related settings based on schematic(ver.1122A). BUG=b:380218793, b:366291025 TEST=emerge-rex coreboot pass Change-Id: Icc24f00406d5f91e38725588109c61b7bad099c3 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85322 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-28mb/google/rex/var/kanix: Update fw_config settingsTyler Wang
Update following fw_config settings: +-----------+-------------------------+----------------------------+ | Bit 0-1 | DB_USB | 0 --> DB_USB_UNKNOWN | | | | 1 --> DB_2USBA | +-----------+-------------------------+----------------------------+ | Bit 2-3 | RETIMER | 0 --> INTEL_HAYDEN_BRIDGE | +-----------+-------------------------+----------------------------+ | Bit 4-6 | AUDIO | 0 --> ALC5682I_ALC1019 | +-----------+-------------------------+----------------------------+ | Bit 7-8 | FAN | 0 --> ABSENT | | | | 1 --> PRESENT | +-----------+-------------------------+----------------------------+ | Bit 9-10 | MIPI_CAM | 0 --> UF_CAM_HI556 | +-----------+-------------------------+----------------------------+ | Bit 11-12 | FP_MCU | 0 --> FP_MCU_ABSENT | | | | 1 --> FP_MCU_NUVOTON | +-----------+-------------------------+----------------------------+ | Bit 13 | WIFI_TYPE | 0 --> WIFI_CNVI | | | | 1 --> WIFI_PCIE | +-----------+-------------------------+----------------------------+ | Bit 14 | KB_TYPE | 0 --> KB_TYPE_DEFAULT | | | | 1 --> KB_TYPE_CA | +-----------+-------------------------+----------------------------+ | Bit 15 | PANEL_PWRSEQ_EC_CONTROL | 0 --> WIFI_CNVI | | | | 1 --> DISABLE | +-----------+-------------------------+----------------------------+ | Bit 16 | KB_BACKLIGHT | 0 --> KB_BACKLIGHT_ABSENT | | | | 1 --> KB_BACKLIGHT_PRESENT | +-----------+-------------------------+----------------------------+ BUG=b:377377766 TEST=emerge-rex coreboot pass Change-Id: Ic6ab99a05cd6d995dc71b39e002c8ad5b1dafc4a Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85293 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-11-28mb/google/rex/var/kanix: Update GPIO settingsTyler Wang
BUG=b:366291025 TEST=emerge-rex coreboot pass Change-Id: I8a9de4098739cbcdc09f2ec685c374bee3c236a7 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85248 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-28mb/google/fatcat: Refactor EC_SOC_INT_ODL GPP for fatcat_ish variantJayvik Desai
This patch refactors the configuration of GPP_E07 (EC_SOC_INT_ODL) to accommodate the fatcat_ish variant The GPP_E07 is not connected on google/fatcat variants using the Microchip EC AIC. BUG=b:370984186 TEST=Able to build fatcat/fatcat_ish w/o any error. Change-Id: I88bd76b2110b4c0742569f1ccb2030ea516b3782 Signed-off-by: Jayvik Desai <jayvik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85223 Reviewed-by: Pranava Y N <pranavayn@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-28mb/google/fatcat: Adjust EC host command range for fatcat_ish variantJayvik Desai
Adjusts the EC host command range for the fatcat_ish variant to 0x800-0x807 & 0x200-0x20f. This change is necessary because the microchip EC used on the Fatcat board has a smaller host command range than the ITE/Nuvoton ECs used on other Fatcat variants. without this patch: [SPEW ] LPC: Trying to open IO window from 800 size 8 [ERROR] LPC: Cannot open IO window: 800 size 8 [ERROR] No more IO windows with this patch: [SPEW ] LPC: Trying to open IO window from 800 size 8 BUG=b:370984186 TEST=Able to build fatcat/fatcat_ish w/o any error. Change-Id: I0d726d60d2a15d2dfaff35f570de479fdc6d15aa Signed-off-by: Jayvik Desai <jayvik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pranava Y N <pranavayn@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-11-28mb/google/fatcat: Add fatcat_ish variantJayvik Desai
This patch adds the "fatcat_ish" board to the fatcat Kconfig. BUG=b:370984186 TEST=Able to build fatcat/fatcat_ish and verify the correct configs selected in coreboot.config Change-Id: I8a49ce54e946dfdfad253ff946da1b37ed50dd0a Signed-off-by: Jayvik Desai <jayvik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85220 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Pranava Y N <pranavayn@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-28mb/google/fatcat/var/felino: Add initial memory configTongtong Pan
Configure memory according to schematics revision 20241120. BUG=b:379797598 TEST=abuild -v -a -x -c max -p none -t google/fatcat -b felino Change-Id: I8420c5cf0421ec9265613c3e1374542a067ce6ed Signed-off-by: Tongtong Pan <pantongtong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85320 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-27drivers/pc80/pc: Clean up formatting of PS/2 related ASL codeNicholas Sudsgaard
This change corrects the indentation and also does the following to have the ASL code written in a more canonical style: - Add space between the operator name and "(". - Use uppercase for hexadecimal values. Change-Id: Ib946599f8ab4d68b16867912743f4a7a5bc0307d Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85281 Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-11-27drivers/wifi: Support Drive Strength BRI Rsp TableJeremy Compostella
Drive Strength BRI Rsp Object provides information from the OEM platforms if they have replaced the Bluetooth Radio Interface resistor to overcome the potential STEP errors on their designs. Based on configuration, CNV firmware shall adjust the BRI Rsp line drive strength. The bri_resistor_value is encoded as follow: | Bit | Val | Description | Default | |------+-----+---------------------------------------------+---------| | 0 | 0 | Device FW default values | 1 | | | 1 | Override device FW default values | | | 3:1 | 0 | Reserved (shall be set to 0) | 0 | | 7:4 | 0 | DSBR override values (only if bit 0 is set) | 0xf | | 31:7 | 0 | Reserved (shall be set to 0) | 0 | Possible values: - 0xf1 (default): indicates that the resistor on board is 33 Ohm - 0x0 or 0xb1: indicates that the resistor on board is 10 Ohm The implementation follows document 559910 Intel Connectivity Platforms BIOS Guideline revision 9.2 specification. BUG=b:346600091 TEST=DSBR methods are added to the wifi device and bluetooth companion device and they return the data supplied by the SAR binary blob Change-Id: Iebe95815c944d045f4cf686abcd1874a8a45e300 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85017 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-27drivers/wifi: Support Wi-Fi PHY Filter ConfigurationJeremy Compostella
This feature provides ability to provide Wi-Fi PHY filter Configuration. A well-defined dedicated filter on particular platform can be used to perform the maximum Wi-Fi performance. The implementation follows document 559910 Intel Connectivity Platforms BIOS Guideline revision 9.2 specification. BUG=b:346600091 TEST=WPFC method is added to the wifi device and return the data supplied by the SAR binary blob Change-Id: Iebe95815c944d045f4cf686abcd1874a8a45e270 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84948 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-27drivers/wifi: Support Extended Bluetooth Regulatory DescriptorJeremy Compostella
Extended Bluetooth Regulatory Descriptor (EBRD) SAR/RFE are safety regulations for limiting antenna radiation near human contact. EBRD provides option to provide up to three sets of TX power limits and power restrictions. As the EBRD table is related to the revision 2 of the BRDS, this commit also adds support for this new revision. The implementation follows document 559910 Intel Connectivity Platforms BIOS Guideline revision 9.2 specification. BUG=b:346600091 TEST=EBRD method is added to the bluetooth companion device and return the data supplied by the SAR binary blob Change-Id: Iebe95815c944d045f4cf686abcd1874a8a45e250 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84947 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-27drivers/wifi: Support Bluetooth Dual Mac ModeJeremy Compostella
This feature provides ability to set the Bluetooth Dual Mac Mode setting. The implementation follows document 559910 Intel Connectivity Platforms BIOS Guideline revision 9.2 specification. BUG=b:346600091 TEST=BDMM method is added to the bluetooth companion device and return the data supplied by the SAR binary blob Change-Id: Iebe95815c944d045f4cf686abcd1874a8a45e240 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84946 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-11-27drivers/wifi: Support Ultra High Band Country SelectionJeremy Compostella
This feature provides ability to set the Bluetooth Ultra High Band (UHB) settings per country. The bluetooth UHB country selection is defined as follow (default is 0): | Bit | Value | | |-------+-------+---------------------------------------------------| | 0 | 0 | No override; use BT device settings | | | 1 | Force disable BT in all countries that are not | | | | defined in the following bits | | 1 | 0 | USA 6GHz BT disable | | | 1 | 6GHz BT allowed in the USA (enabled only if the | | | | device is certified to the USA) | | 2 | 0 | Rest of the World 6GHz BT disable | | | 1 | 6GHz BT allowed in the Rest of the World (enabled | | | | only if the device is certified to the rest | | | | of the world) | | 3 | 0 | EU countries 6GHz BT disable | | | 1 | 6GHz BT allowed in the EU countries (enabled only | | | | if the device is certified to the EU countries) | | 4 | 0 | South Korea 6GHz BT disable | | | 1 | 6GHz BT allowed in the South Korea (enabled only | | | | if the device is certified to the South Korea) | | 5 | 0 | Brazil 6GHz BT disable | | | 1 | 6GHz BT allowed in the Brazil (enabled only if | | | | the device is certified to the Brazil) | | 6 | 0 | Chile 6GHz BT disable | | | 1 | 6GHz BT allowed in the Chile (enabled only if the | | | | device is certified to the Chile) | | 7 | 0 | Japan 6GHz BT disable | | | 1 | 6GHz BT allowed in Japan (enabled only if the | | | | device is certified to Japan) | | 8 | 0 | Canada 6GHz BT disable | | | 1 | 6GHz BT allowed in Canada (enabled only if the | | | | device is certified to Canada) | | 9 | 0 | Morocco 6GHz BT disable | | | 1 | 6GHz BT allowed in the Morocco (enabled only if | | | | the device is certified to the Morocco) | | 10 | 0 | Mongolia 6GHz BT disable | | | 1 | 6GHz BT allowed in the Mongolia (enabled only if | | | | the device is certified to the Mongolia) | | 11 | 0 | Malaysia 6GHz BT disable | | | 1 | 6GHz BT allowed in the Malaysia (enabled only if | | | | the device is certified to the Malaysia) | | 31:12 | 0 | Reserved Should set to zeros | The implementation follows document 559910 Intel Connectivity Platforms BIOS Guideline revision 9.2 specification. BUG=b:346600091 TEST=BUCS method is added to the bluetooth companion device and return the data supplied by the SAR binary blob Change-Id: Iebe95815c944d045f4cf686abcd1874a8a45e231 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-27drivers/wifi: Support Bluetooth Bands Selection ModeJeremy Compostella
This feature provides ability to provide Bluetooth Bands Selection Mode. The bluetooth bands selection mode is defined as follow: | Bit | Band GHz | Value | Description | Default | |------+----------+-------+----------------------+---------| | 0 | 2.4GHz | 0 | Controlled by NIC | 0 | | | | 1 | Force disable 2.4GHz | | | 1 | 5.2GHz | 0 | Controlled by NIC | 0 | | | | 1 | Force disable 5.2GHz | | | 2 | 5.8GHz | 0 | Controlled by NIC | 0 | | | | 1 | Force disable 5.8GHz | | | 3 | 6.2GHz | 0 | Controlled by NIC | 0 | | | | 1 | Force disable 6.2GHz | | | 31:4 | Reserved | | NA | 0 | The implementation follows document 559910 Intel Connectivity Platforms BIOS Guideline revision 9.2 specification. BUG=b:346600091 TEST=BBSM method is added to the bluetooth companion device and return the data supplied by the SAR binary blob Change-Id: Iebe95815c944d045f4cf686abcd1874a8a45e230 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-11-27drivers/wifi: Support Bluetooth Dual Chain ModeJeremy Compostella
This feature provides ability to provide dual chain setting. The implementation follows document 559910 Intel Connectivity Platforms BIOS Guideline revision 9.2 specification. BUG=b:346600091 TEST=BDCM method is added to the bluetooth companion device and return the data supplied by the SAR binary blob Change-Id: Iebe95815c944d045f4cf686abcd1874a8a45e220 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84943 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-11-27drivers/wifi: Support Bluetooth BiQuad Bypass FilterJeremy Compostella
This feature provides ability to identify non-LTE platform and disable BiQuad Bypass filter logic in hardware for Bluetooth usecases reducing device power consumption. The implementation follows document 559910 Intel Connectivity Platforms BIOS Guideline revision 9.2 specification. BUG=b:346600091 TEST=BBFB method is added to the bluetooth companion device and return the data supplied by the SAR binary blob Change-Id: Iebe95815c944d045f4cf686abcd1874a8a45e213 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84942 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-11-27drivers/wifi: Support Bluetooth Per-Platform Antenna GainJeremy Compostella
The ACPI BPAG method provide information to controls the antenna gain method to be used per country. The antenna gain mode is a bit field (0 - disabled, 1 -enabled) defined as follow: - Bit 0 - Antenna gain in EU - Bit 1 - Antenna gain in China Mainland The implementation follows document 559910 Intel Connectivity Platforms BIOS Guideline revision 9.2 specification. BUG=b:346600091 TEST=BPAG method is added to the bluetooth companion device and return the data supplied by the SAR binary blob Change-Id: Iebe95815c944d045f4cf686abcd1874a8a45e210 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84941 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-11-27mb/google/rauru: Add configuration for SD card detect pinYidi Lin
Pass SD card detect GPIO to payloads for SD card detection. BUG=b:317009620 TEST=build pass Change-Id: I1901fd45833f2415c61b61f9e04ebb54440df80a Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85250 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-27mainboard/intel/frost_creek: Add support for Intel CRB Frost CreekYuchi Chen
The Frost Creek CRB is a reference platform for Intel Atom P5300 and P5700 (known as Snow Ridge NS and Snow Ridge NX) SoC. Change-Id: If3b387a6a4a567415aef21e520056c23b8cfa013 Signed-off-by: Yuchi Chen <yuchi.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83322 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-27soc/intel/snowridge: Add support for Intel Atom Snow Ridge SoCYuchi Chen
This change adds support for Intel Atom Processors P5300, P5700 product families (known as Snow Ridge NS and Snow Ridge NX). Change-Id: I32ad836dfaaff0d1816eac41e5a7d19ece11080f Signed-off-by: Yuchi Chen <yuchi.chen@intel.com> Tested-by: Vasiliy Khoruzhick <vasilykh@arista.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-11-27commonlib/bsd/mem_chip_info: Add mem_chip_info_entry_density_bytesYu-Ping Wu
Add a helper function to get the mem_chip_info entry size. Change-Id: Ibf2a2006fb3e7772688b80807589e8f2d64d1147 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-11-26mb/google/brya/var/trulo: Remove overriding of PL1 value to 20WVidya Gopalakrishnan
The RAPL PL1 limit and MMIO PL1 max values should be set as per silicon TDP as specified in the PDG doc#646929. BUG=b:378623372 TEST=Build and boot on Trulo board. Verified PL1 value is updated in DTT and sysfs interfaces. Output with 15W silicon as below: cd /sys/class/powercap/ cat intel-rapl/intel-rapl\:0/constraint_0_max_power_uw 15000000 cat intel-rapl/intel-rapl\:0/constraint_0_power_limit_uw 15000000 cat intel-rapl-mmio/intel-rapl-mmio\:0/constraint_0_max_power_uw 15000000 cat intel-rapl-mmio/intel-rapl-mmio\:0/constraint_0_power_limit_uw 15000000 Change-Id: I798c4f10e10a579f470e00dbdb77a84619ad796a Signed-off-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85184 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-11-26mb/google/brya/var/trulo: Enable Charger participant in Passive PolicyVidya Gopalakrishnan
Update the TSR1 target's source to CHARGER in Passive Policy. BUG=b:378623372 TEST=Build and boot on Trulo board. Verified the source for TSR1 is updated to Charger in Passive Policy Change-Id: I43db616fd48fc4659dcba359f17854e14adb6039 Signed-off-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-26mb/google/fatcat/var/felino: Add initial GPIOs configTongtong Pan
Configure GPIOs according to schematics revision 20241120. BUG=b:379797598 TEST=abuild -v -a -x -c max -p none -t google/fatcat -b felino Change-Id: I4e9e81af9c3d8807e65ecd552e73305c1d109a2d Signed-off-by: Tongtong Pan <pantongtong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85234 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
2024-11-26mb/google/brya: Create uldrenite variantJohn Su
Create the uldrenite variant of the brya reference board by copying the template files to a new directory named for the variant. BUG=b:376781355 TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_ULDRENITE Change-Id: Ife666c6f2fe69643033e2ce3b299e7414e16eef1 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85207 Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-25soc/intel/ptl: Change ACPI name for IPUCliff Huang
Change IPU name to 4 characters: IPU0 While the ACPI device name is 'IPU', some part of generated SSDT looks for 'IPU_', since by convention, the names less than 4 characters is padded with underscope ("_"). Please see APCI spec 5.3 ACPI Namespace. BUG=none TEST=Boot fatcat board to OS and check that IPU device name is IPU0 in the SSDT. Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: I60ce2998cb1d97589c0f7544ce8dc92c12a2b8c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/85274 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-25Revert "mb/google/nissa/var/telith: Add 6W and 15W power limit parameters"Rui Zhou
This reverts commit c89ccaf2816a781ae0acb997557aed7d8cf10b7c. Reason for revert: b:378775630#comment11 Intel believes that the AC only issue should be addressed head-on and the previous power limit default settings should be maintained. BUG=b:378775630 TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I9f8344288a1811bddce702c16a244e3d4a59f195 Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85276 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-11-23mb/google/fatcat: Move CSE sync at payloadSubrata Banik
The CSE sync in the payload would allow CrOS devices to render the user notification when updating. Currently, CrOS devices typically take 8-20 seconds to do a CSE sync. BUG=b:380220737 TEST=Able to build and boot google/fatcat. Change-Id: I8f1dd2e153ed0f1e671699002cf34a58d758ce2f Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85233 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-22mb/google/brya/var/redrix: Add ACPI fan definitionsStanislaw Kardach
Add entries in overridetree.cb required for exposing fan control via ACPI, which is used then by acpi-fan driver in Linux kernel. This includes: 1. Fan duty-cycle/rpm table. The RPM numbers were adjusted to the values reported by ACPI on different duty cycle levels. 2. Dummy Active DPTF policy. This is required to mark the TFNx devices as active and therefore let the acpi-fan driver probe. BUG=b:358089775 TEST=Build and flash on redrix and check /sys/class/thermal for TFN1 Change-Id: Iaeffe8bc48cd8cd800efa7be29ec81447ecf2935 Signed-off-by: Stanislaw Kardach <skardach@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85175 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-11-22mb/google/nissa/var/pujjoga: Turn off camera during S0ixRoger Wang
Add a variant specific S0ix hook to fill the SSDT table to disable and enable camera during suspend and resume respectively. For safety concern, our client LENOVO want us to follow the Boten project to create the function. BUG=b:378525209 TEST=Build Pujjoga BIOS image. Ensure that camera is disabled during suspend and enabled during resume. Do the powerd_dbus_suspend and measure the camera power 3.3V which is disable. And resume will recover. Change-Id: I7c7f5d314e8b2a4d5f72c452128f6c4b57c45993 Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85133 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-22mb/google/fatcat/var/francka: Add memory DQ mapIan Feng
Follow latest schematics MB_SCH_1102A to add the DQ map. BUG=b:372395010 TEST=emerge-fatcat coreboot Change-Id: I2ea0c5a07d83df108e41fc838e702b793c878096 Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Pranava Y N <pranavayn@google.com>
2024-11-22mb/google/fatcat/var/francka: Use RAM ID 1 for MT62F2G32D4DS-020 WT:FAmanda Huang
Change the ram_id to 1 for MT62F2G32D4DS-020 WT:F based on the hardware schematic MB_SCH_1102A. BUG=b:372395010 TEST=Run part_id_gen tool and check the generated files. Change-Id: I8cf0e65036c2da7641f29b2975dece718f7c83e3 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85206 Reviewed-by: Pranava Y N <pranavayn@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-22mb/google/fatcat/var/fatcat: Enable UFS controllerSubrata Banik
This commit enables the UFS controller on the Google Fatcat mainboard based on FW_CONFIG. This change allows the system to utilize the UFS storage device. TEST=Built google/fatcat with UFS enabled. Change-Id: Ib32523e7865b2ea23d990b2cf9b7406a4d6ecde3 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85192 Reviewed-by: Pranava Y N <pranavayn@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-11-22soc/intel/pantherlake: Add option to enable UFS controllerSubrata Banik
This patch adds a Kconfig option to enable the UFS controller for mainboards using the Intel Panther Lake-UH SoC. By default, the UFS controller is disabled as it is not supported by other SoC configurations. This prevents accidental enabling of the UFS controller on unsupported platforms. BUG=b:379828045 TEST=Built google/fatcat with and without UFS enabled. Change-Id: Ica89ae85582367809128fc6cf0cd5fe5d40a2235 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85191 Reviewed-by: Pranava Y N <pranavayn@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-22soc/intel/cmn/acpi: Use Kconfig guards for UFS workaroundsSubrata Banik
This change introduces Kconfig guards around the UFS workaround code in the common ACPI ASL file. This ensures that these workarounds are only applied when necessary, allowing future SoCs with UFS controllers to reuse the common ASL file without modification. By using Kconfig, we can enable or disable the workarounds based on the specific SoC configuration, providing greater flexibility and maintainability. BUG=b:379828045 TEST=Able to compile google/fatcat. Change-Id: I968b8811e508378a36648bd8234ff0fd7237b00d Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85208 Reviewed-by: Pranava Y N <pranavayn@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-21vc/google/chromeos/sar: Use size_t instead of int for size functionJeremy Compostella
BUG=b:346600091 TEST=Compilation successful Change-Id: Iebe95815c944d045f4cf686abcd1874a8a45e225 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-21soc/mediatek: Rename FREQ_*MHZ to PMIF_TARGET_FREQ_MHZYu-Ping Wu
Enum is useful for improving readability because of the meaningful enum names. Names such as "FREQ_260MHZ = 260", however, don't provide any extra information of the value itself. Therefore, rename those enums to PMIF_TARGET_FREQ_MHZ to better reflect its usage. Change-Id: I420b909a76973a040b96feb2bcb93d3640b086b5 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85204 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-21soc/mediatek: Rename pmif_ulposc_* function argumentsYu-Ping Wu
Rename the arguments of pmif_ulposc_check() and pmif_ulposc_cali() to make the frequency unit clearer. Change-Id: I7719fd4dc43edd47bf014af13fb57ad38f43778c Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-11-21mb/topton/adl: Add initial support for X2F N100 FW applianceAlicja Michalska
X2F-N100 is an embedded device/firewall with Intel N100 SoC and 4x 2.5Gb Intel I226-V NICs. Currently tested and working: - Payload (EDK2) - Suspend (S3 state) - All USB ports - 4x NICs - M.2 NVME - mPCI-E (WiFi/modem) - 4G USB modem in mPCI-E slot - PCI-E passtrough to VMs (NICs) - HDMI/DP output + HDA audio OS: - Alpine Linux - Windows 11 Pro (from USB) Untested, looks sane: - Internal USB port on M.2 slot marked as "5G_USB" Broken/TODO: - SATA EDK2 reports "Unsupported", drive's not detected. - Suspend in Windows (statements dreamed up by the utterly deranged) Change-Id: Ic5cd2060c1635b79cb28ffe294220b63ad2bab65 Signed-off-by: Alicja Michalska <alicja.michalska@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84175 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Alicja Michalska <ahplka19@gmail.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2024-11-21superio/ite: Add support for IT8625EAlicja Michalska
Found on tiny firewall appliance from Chinese company named "Topton" with Intel N100 SoC. This system is fanless so all we need is the ability to use serial output (RS232 in RJ45 form-factor, called "Cisco-style" at address 0x3f8), which is working. Change-Id: I9c27f52785d294a6f7c315b8df47d4dd5b389414 Signed-off-by: Alicja Michalska <ahplka19@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84176 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Goncharov <chat@joursoir.net> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2024-11-21mb/google/rauru: Initialize DPM in ramstageJarried Lin
Add initialization of DPM drvier for DRAM low power mode. This DPM flow adds 3ms to the boot time, making the total boot time 860ms. coreboot logs: CBFS: Found 'dpm.dm' @0x19880 size 0x5b7 in mcache @0xfffdd1fc mtk_init_mcu: Loaded (and reset) dpm.dm in 0 msecs (1888 bytes) CBFS: Found 'dpm.pm' @0x19ec0 size 0x7fb5 in mcache @0xfffdd258 mtk_init_mcu: Loaded (and reset) dpm.pm in 3 msecs (43844 bytes) TEST=Build pass. Check with cbmem -1. BUG=b:317009620 Change-Id: Ib855e133a30067fc89c88d5c0fb454cc78504ff3 Signed-off-by: Crystal Guo <crystal.guo@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85122 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-21soc/mediatek: Rename dpm to dpm_v1Crystal Guo
MT8196 equips new DPM hardware which is different from precedent SoCs. Therefore, we need implement a new DPM loader (said version 2) to run the blob. Considering the version iteration, rename the original dpm to dpm_v1. TEST=Build pass. BUG=b:317009620 Change-Id: I07afb8f5c23e96aad3c6cb0887cb7efd16ebf296 Signed-off-by: Crystal Guo <crystal.guo@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-11-21soc/mediatek/mt8196: Add version two DPM driverJarried Lin
Add version two of the DPM driver for DVFS and DRAM low power feature. MT8196 equips new DPM hardware which is different from precedent SoCs. Therefore, we implement a new DPM loader (said version 2) to run the blob. The new DPM driver includes following features. - Simplify the DPM loading flow without the needs of waking DPM SRAM up and initializing bootargs. - Use the broadcast function to ensure that the DPM load and reset operations performed on channel A will be synchronized to the other three channels. TEST=Full calibration pass. BUG=b:317009620 Change-Id: I77e1ac252b00ab9c4864cc308f20da4a79714e4c Signed-off-by: Crystal Guo <crystal.guo@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85121 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-11-21mb/google/rauru: Fully calibrate DRAMJarried Lin
Initialize and calibrate DRAM in romstage. DRAM full calibration logs: dram_init: dram init end (result: 0) DRAM-K: Fast calibration passed in 1119 msecs TEST=Full calibration pass. BUG=b:317009620 Change-Id: Ibb18675caa11a828d27860eeab48c49acf6b938d Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85120 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-11-21soc/mediatek/mt8196: Set DRAMC_PARAM_HEADER_VERSION to 3Jarried Lin
Set DRAMC_PARAM_HEADER_VERSION to 3 for aligning with DRAM blob. Test=Bootup pass BUG=b:317009620 Change-Id: I17062bc3b79f60552981d7c604bb5350d8f6199f Signed-off-by: Crystal Guo <crystal.guo@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85119 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-11-21nb/via/cx700/romstage: Include missing static.h headerFelix Singer
Commit 755ecc259c42 ("nb/via/cx700: Implement raminit") is missing an include for static.h and breaks the main branch. Fix it. Change-Id: I836ab03b4eba6f32a2ae576eafc465543179cd05 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85232 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-11-21mb/google/nissa/var/glassway: Support HDMI FeatureDaniel Peng
1. Add DB_HDMI_LTE 5 on DB_USB fw_config . 2. Due to refer Nivviks, used GPP_A20/GPP_E20/GPP_E21 as default to set for NF1. Moreover, set to disable HDMI to NC when fw_config not for DB_HDMI_LTE. 3. Set related DB_USB fields to probe correct devices. BUG=b:369509276 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: Ic5e3b596ff3681f79f31c262e9e59d163e471e3c Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-11-21nb/via/cx700: Scan PCI bus and probe resourcesNico Huber
Change-Id: I1268a8f886ff395ff822b14a5427a5031260c541 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83389 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-21cpu/via/c7: Compress ramstage with LZ4 by defaultNico Huber
It's a slow CPU. Change-Id: I0bf75f410c1d9134f05a2d11b8d011499a7cf794 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82772 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-21cpu/via/c7: Use the simple p4-netburst CAR teardownNico Huber
Change-Id: Icba7586145fbfd859d738ecd7a407739a7024ebb Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82771 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-21nb/via/cx700: Implement raminitNico Huber
This brings the old raminit implementation for CX700 back. It was removed in commit e99f0390b9b8 (Remove VIA CX700 northbridge sup- port). The code is mostly unchanged, three minor issues are fixed: * A shift (>>= 2) was missing when reading tRRD from SPD byte 28. The fixed value matches what the vendor BIOS of a VIA EPIA-EX board programs. The code also suggests that we are looking for a small value (<= 19 for DDR2-533). * We allow the board port to specify which clock outputs should be enabled now. This is necessary for the VIA EPIA-EX, which needs the ALL_MCLKO setting (instead of the previously hard- coded MCLKO2. * When programming the DQS output delays, we considered the 1~2 rank values only for single-rank configurations. Changing the `< 2` to `<= 2` brings us closer to the vendor values on the VIA EPIA-EX. Otherwise a lot of cosmetics changed. Partly because the original code was to be #included into another C file, but also to satisfy checkpatch. Also, all the #if'd code was removed (32-bit width option, ECC, etc.). Change-Id: Ibc36b4f314cdf47f18c8be0fcb98218c50938e94 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-11-21nb/via/cx700: Implement FSB tuningNico Huber
This northbridge provides a lot of knobs for fine-grained tuning of the FSB drivers. The programming manual calls this "Host AGTL+ I/O Driving Control". We program the known good values for use with a VIA C7 CPU, and warn about use with different CPUs. The numbers were pulled out of raminit of the original CX700 port. Originally, there was a write to 0x83 as well, to set bit 1 which triggers a soft reset of the CPU. It was amidst a table, so it seems unclear if it was put there intentionally. Change-Id: I24ba6cfaab2ca3069952a6c399a065caea7b49f2 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-11-21nb/via/cx700: Perform early bootblock initNico Huber
Disable a timer (GP3) that is always running by default. And enable SMBus, which is useful this early as a console. The SMBus controller is mostly compatible to the Intel one. Change-Id: I77f179433b280d67860fc495605b5764ed081a6c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-11-21soc/intel/xeon_sp: Fix SRAT debug printsPatrick Rudolph
- Drop duplicated fields - Drop fields filled with constant values - Drop SRAT prefix for sysmemmap entries - Print all zeros when concatenating two hex numbers Change-Id: I379aeb6fcd2e28665c7d592b0639db3c1b4caa9b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85189 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-21mb/google/nissa/var/telith: Add 6W and 15W power limit parametersRui Zhou
The power limit parameters were defined for 378775630#comment5 by the power team. BUG=b:378775630 TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I069869fa01dc157cf2544e72468f43ce1bb64035 Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85209 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lei Cao <caolei6@huaqin.corp-partner.google.com>
2024-11-21mb/google/nissa/var/rull: add RAM ID MT62F1G32D2DS-023 WT:BRui Zhou
Add RAM ID for DDR MICRON MT62F1G32D2DS-023 WT:B BUG=b:378821948 BRANCH=None TEST=boot to kernel success Change-Id: I22e00cffaf6007c64d0c9ffa5f5dde528e3d8952 Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85202 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Lei Cao <caolei6@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-11-21tree: Remove unused <bootstate.h>Elyes Haouas
Remove "include <bootstate.h>" when it is not used. Change-Id: Ic27acf9f8dfbbccb8f48a139032b1463e7185030 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85216 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-20mb/hp: Add HP Compaq 8300 Elite SFFMichał Zieliński
* Add initial board commit based on HP 8200 SFF and HP Z220 SFF. * Add documentation. Tested on HP 8300 SFF. Change-Id: Ib5322acc0210f000b53954e2925549358f86d5c8 Signed-off-by: Michał Zieliński <michal.zielinski@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67666 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alicja Michalska <ahplka19@gmail.com>
2024-11-20mb/ocp/tiogapass: Only advertise C-states C1C6Patrick Rudolph
Only advertise C-state C1 and C6. TEST: On ocp/tiogapass Linux no longer complains about advertised but unsupported C-states. Change-Id: I184c337478f97e2d36f6e89b764dbe1da1b91697 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85190 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-20soc/intel/pantherlake/acpi: Update camera_clock_ctl.aslBora Guvendik
Fix ISCLK register definitions Reference: 813032 - Panther Lake H I/O Registers BUG=b:357011633 TEST=check camera functionality on fatcat Change-Id: Ie9f1f639970344eb359dee37914ee26a02dcfb4b Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85058 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Pranava Y N <pranavayn@google.com>
2024-11-20soc/intel/ptl: Update ME specification version to 21Pranava Y N
This patch updates Kconfig that selects ME specification version for Pantherlake SoC from version 18 to version 21. BUG=b:362647201 TEST=Able to build fatcat with SOC_INTEL_COMMON_ME_SPEC_21 selected. Change-Id: Ibfebd7c093240aa7f1d6337f3e4dd6e5d34bed1d Signed-off-by: Pranava Y N <pranavayn@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85187 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-11-20common/block/cse: Add Kconfig to support ME specification version 21Pranava Y N
This patch introduces Kconfig support for Intel's Management Engine (ME), version 21. When 'SOC_INTEL_COMMON_BLOCK_ME_SPEC_21' is selected it sets the ME_SPEC configuration to 18 because ME version 21 is compatible with version 18 in terms of Host Firmware status registers. BUG=b:362647201 TEST=Able to build fatcat after selecting SOC_INTEL_COMMON_ME_SPEC_21 Change-Id: I90c946751ac530dac1af4ff9c3c921b5faf82448 Signed-off-by: Pranava Y N <pranavayn@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-20device: Add const qualifier for input of dev_is_active_bridgeShuo Liu
Add const qualifier for input of dev_is_active_bridge so that dev_is_active_bridge could be used for both struct device * input and const struct device * input. TESTED=Build and boot on intel/avenuecity CRB Change-Id: Ia4231534c87cd13d4e6e4d606733f9eb11221ac1 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-11-20soc/intel/pantherlake: Enable CPU feature programming in corebootSubrata Banik
This patch enables coreboot to perform CPU feature programming for both the Boot Strap Processor (BSP) and Application Processors (APs) on Intel Panther Lake platforms. This change eliminates the need for the following FSP modules: - CpuMpPpi - CpuFeature By handling CPU feature programming within coreboot, we reduce reliance on external FSP binaries and improve code maintainability. BUG=b:376092389, b/364822529 TEST=Built and booted google/fatcat successfully. Verified CPU features are correctly programmed. Change-Id: I73321485327f6a02ec8338fcfa1faf1e71008ba6 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2024-11-20mb/google/fatcat: Create felino variantTongtong Pan
Create the felino variant of the fatcat reference board by copying the fatcat files to a new directory named for the variant. BUG=b:379797598 TEST=1. util/abuild/abuild -p none -t google/fatcat -x -a make sure the build includes GOOGLE_FELINO 2. Run part_id_gen tool without any errors Change-Id: Iff7989c19e775d65d5fb04aa4489854150390a35 Signed-off-by: Tongtong Pan <pantongtong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85185 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-19soc/intel/xeon_sp: Walk devicetree to find IOAPICsPatrick Rudolph
Walk the devicetree to collect all PCI IOAPICs. When found read the IOAPIC base address from hardware. TEST: On ocp/tiogapass all IOAPICs are found and advertised. Change-Id: I2835c202e56849655795b96bc83862cb18e83fc0 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84851 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-19soc/intel/xeon_sp/cpx: Fix PCU device IDsPatrick Rudolph
CPX uses the same PCU IDs as SKX. Change-Id: I1bc96232e120b9cd9cb4f5b7b5df7d7db62fcbc4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84852 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-19soc/intel/xeon_sp: Fix VTD addressPatrick Rudolph
On 1st and 2nd gen Xeon-SP the VTD PCI device is not at DEVFN 0.0. Fix the DEVFN address and thus fix an assertion in vtd_probe_bar_size(). Change-Id: Ie879e95436af92fca1fee49135938ca2b005d579 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-11-19soc/intel/xeon_sp: Drop DMAR_X2APIC_OPT_OUTPatrick Rudolph
Drop DMAR_X2APIC_OPT_OUT since coreboot is able to enable X2APIC. TEST: Works fine on OCP/tiogapass, thus drop the opt out. Change-Id: Ia0443a39a9bf392976cfd1a7ccf6a335d5f0bd70 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-11-19soc/intel/xeon_sp/acpi/gen1: Properly set _PXMPatrick Rudolph
Set _PXM in ACPI to indicate which socket the PCI domain belongs to. TEST: Booted on 2S ocp/tiogapass and checked dmesg that PCI domains are advertised in the correct Proximity Domain. Change-Id: I39cec0307b0dce0a4da5df5be5095b8d90758997 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-11-19mb/ocp/tiogapass: Enable GBE and 10GBE regionPatrick Rudolph
Enable GBE and 10GBE region since it's used on vendor firmware. TEST: Able to include gbe.bin and 10gbe.bin blobs into ROM. Change-Id: Ia868d6b42e5e557d2abd60be4b2f318a1313b039 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85171 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-19soc/intel/xeon_sp: Read IOAPIC ID from hardwarePatrick Rudolph
Currently coreboot hardcodes the same IOAPIC IDs as used on UEFI native, however FSP does not program the IOAPIC IDs, except for PCH IOAPIC. Drop existing code that hardcodes PCI addresses and IOAPIC IDs and detect the IOAPIC inside the domain automatically, read the IOAPIC base address and let existing code figure out the IOAPIC ID by reading it back from HW. Change-Id: I2543a46dcc4a98ec8629530ca87882a7106c9ed1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84850 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-11-19soc/intel/xeon_sp: Drop unused codePatrick Rudolph
Drop soc_get_stack_for_port() and move a comment. Change-Id: I9d7615b633b344783150b3e1f3d98634630ed354 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84844 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-19soc/intel/common/block/gpmr: Disable GPMR regs if ext-BIOS is disabledYuchi Chen
General Purpose Memory Range registers are only used if extended BIOS region is enabled now, this patch wraps the related code with Kconfig item `CONFIG_FAST_SPI_SUPPORTS_EXT_BIOS_WINDOW`. Change-Id: I975840684b3dd9e9e76ec6a08de12d8dd3c8f08a Signed-off-by: Yuchi Chen <yuchi.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-11-19soc/intel/common/block/itss: Route PCI INT pin to PIRQ using PIRYuchi Chen
ITSS has PCI Interrupt Route (PIR) registers to map PCI INTA-D to one of PIRQA-H. This patch adds a function itss_get_dev_pirq() returning PIRQ for a given device and INT pin. Change-Id: If911b34c506a4a3657b873baab33814c1a7d674b Signed-off-by: Yuchi Chen <yuchi.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-11-19drivers/wifi: Remove unnecessary data structure copyJeremy Compostella
The current design has the emit_wifi_sar_acpi_structures() function load and unload the SAR binary. Since DSM and Bluetooth SAR data structures are used outside this function, they are being copied into data structure located in the calling function stack. This overhead is unnecessary as loading and unloading the SAR binary could be done by the calling function. In addition, we are about to add several Bluetooth related data structures which, under the current design, would require to add even more data structure copy operations. BUG=b:346600091 TEST=Wifi/Bluetooth SAR ACPI tables are identical before and after this commit Change-Id: Iebe95815c944d045f4cf686abcd1874a8a45e207 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-19mb/google/brya/var/orisa: Update Type C DisplayPort HPD ConfigurationVarun Upadhyay
This change removes the GPIO configuration for Type C DP HPD, as the Type C port does not require HPD setup. BUG=b:366156678 TEST=Build and boot google/orisa. Test Type C port for external usb and DisplayPort functionality. Change-Id: I59ec5c19dbbd053bda25f4260321220524d785b3 Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85181 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-11-19mb/google/brya/var/trulo: Update Type C DisplayPort HPD ConfigurationVarun Upadhyay
This change removes the GPIO configuration for Type C DP HPD, as the Type C port does not require HPD setup. BUG=b:366156678 TEST=Build and boot google/trulo. Test Type C port for external usb and DisplayPort functionality. Change-Id: Iad602c9a15c65d37a37d06d486843f45e341b6bc Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85180 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-11-19mb/google/brox: Reset XHCI controller while preparing for S5Karthikeyan Ramasubramanian
This patch calls `xhci_host_reset()` function to perform XHCI controller reset. This is proactively pulled in to avoid any potential timeouts when PMC sends an IPC command to disconnect the active USB ports. BUG=b:364158487 TEST=Build Brox BIOS image and boot to OS. Perform warm reset, cold reset and suspend/resume cycle. Change-Id: I33fd3aa13e81c7b1ae1ebf6674cc8ac1437ecc03 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: <srinivas.kulkarni@intel.com>
2024-11-19tree: Remove unused <assert.h>Elyes Haouas
Remove <assert.h> when it is not used. Change-Id: Icb8ee7dcfd05e0a3131d02d1bc8fe150bbf9527b Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85164 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-11-19soc/qualcomm/sc7280/socinfo: Add missing <console/console.h>Elyes Haouas
This to fix Wimplicit-function-declaration error: src/soc/qualcomm/sc7280/socinfo.c:67:2: error: call to undeclared function 'die'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration] 67 | die("could not match jtagid\n"); | ^ src/soc/qualcomm/sc7280/socinfo.c:81:2: error: call to undeclared function 'die'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration] 81 | die("could not match jtagid\n"); | ^ Change-Id: If930e39d0c7231975c1a11179fa7dbd9fcc0d1d1 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85166 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-18vendorcode/intel/fsp/skx_sp: Fix PCI domain scanningPatrick Rudolph
Properly scan all logical stack when creating PCI domains. Fixes PCI bus ranges being used on other stacks, since they look unused, as not all stacks are checked. Change-Id: I13c8b389a585dbccec182d3c98021f1d9d648b2c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-11-18mb/ocp/tiogapass: Fix GPIOsPatrick Rudolph
Do not enable SMIs on GPIOs since there's no SMI handler. Without an SMI handler this will just slow down the platform once the SMI asserts since it's never cleared. Once the protocol between BMC and x86 has been implemented in an SMI handler, this can be reverted. TEST: Booted on OCP/tiogapass without massive slowdown when SMIs are enabled. Change-Id: If16c2c427f9b160f78a768a01a60128a6ed2c53f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alicja Michalska <ahplka19@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2024-11-18mb/google/nissa/var/rull: add RAM ID H58G56BK8BX068Rui Zhou
Add RAM ID for DDR Hynix H58G56BK8BX068 BUG=b:378821948 BRANCH=None TEST=boot to kernel success Change-Id: I4c4ad191a5e9703ee0f3bed150c816bfb098daf5 Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85117 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Jayvik Desai <jayvik@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-11-18mb/google/rex/var/kanix: Add USB A1 port supportTyler Wang
BUG=b:366291025 TEST=emerge-rex coreboot pass Change-Id: Ie76b20cab9e15a1944451697ebf243c0f0cc4740 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85105 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-11-18mb/google/rex/var/kanix: Add audio codec/amp supportTyler Wang
Add support for Realtek audio codec ALC5682I-VS and Realtek audio amp ALC1019. BUG=b:366291025 TEST=emerge-rex coreboot pass Change-Id: I0cac934004b0b1b72feaacea99a602fffd2f1457 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85100 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 10:40:04 +0000