summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2012-11-16Clean up KconfigStefan Reinauer
- move VGA handling options into devices/Kconfig - make Devices a top level menu - move some options "closer" to the code they control Change-Id: Ia79541d18b2b0d9b89a8b154255e312060627c48 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1840 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-16Drop Kconfig.deprecated_optionsStefan Reinauer
Both remaining options, DRIVERS_PS2_KEYBOARD and ID_SECTION_OFFSET are not likely to go away any time soon, so let's not keep them in Kconfig.deprecated_options but move them close to the code they control. Change-Id: I310b877c5b3d5a3444056641c4aee07a48c4c4be Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1839 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-16Drop unused Kconfig variable PCIE_TUNINGStefan Reinauer
It's only mentioned in Kconfig and never set nor used. Change-Id: Icc0ac56ae7b325a9e93ed5cdce9dc4b7bab43140 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1838 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-16Drop Kconfig variable BOARD_HAS_HARD_RESETStefan Reinauer
hard_reset was indeed consolidated and moved into the southbridge code a while ago, but the config variable was still kept alife, with some duplicate code. Change-Id: I60d4a87de916667f6e89353dfbe1a7b9eca380f7 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1837 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-16Drop unneeded BOARD_HAS_FADT optionStefan Reinauer
Change-Id: Iaaeee87d70cf052bc7980007cdf1f7dda88b3623 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1836 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-16Reduce number of per-mainboard changesStefan Reinauer
- Add mainboard_smi.c from arch/x86/Makefile if it's there - Add mainboard's chromeos.c from the chromeos Makefile Change-Id: I3f80e2cb368f88d2a38036895a19f3576dd9553b Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1835 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-16Drop CONFIG_HAVE_BUS_CONFIG, clean up KconfigStefan Reinauer
This patch is the beginning of a Kconfig cleanup series - drop CONFIG_HAVE_BUS_CONFIG and add get_bus_conf.c if it exists in the mainboard directory - drop duplicate ACPI_SSDTX_NUM from mainboard Kconfig if it only defines the defaul value of 0 - Add mptable.c, fadt.c, reset.c and ssdtX.asl when they exist, not based on some Kconfig magic Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: Ia14a7116dad6a724af7e531920fee9a51fd0b200 Reviewed-on: http://review.coreboot.org/1832 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-14Use mainboard hook for HP DL165Kyösti Mälkki
The board incorrectly overrides the southbridge hook, so use the new mainboard hook instead. This change also activates the actual southbridge hook to enable decode of complete 4 MB flash memory region. Change-Id: I02c6fe89ae9ad4a7403f024fac875ebd88a8e142 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1831 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14ms9652: fix misuse of LIFT_BSP_APIC_IDStefan Reinauer
It's a bool, not a number Change-Id: I70d52c6af6703101dbd534970ec65275902a283d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1842 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14mainboard/siemens/sitemp_g1p1: Fix YABEL usageNico Huber
The board was broken for use with CONFIG_PCI_OPTION_ROM_RUN_YABEL. Change-Id: Ia57d630143386fe637af83b9e7345d0d3750b089 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1854 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14Make YABEL's version of mainboard_interrupt_handlers() usableNico Huber
YABEL's version of mainboard_interrupt_handlers() was hidden behind an inline stub. This fixes it. Change-Id: Ie53424a8ce074e93a720c0ef94cb39994cacd023 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1853 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14mainboard/siemens/sitemp_g1p1: Fix CMOS checksum algorithm here, tooNico Huber
Some time ago our CMOS checksum algorithm was changed under the topic: Fix our CMOS checksum algorithm so it matches what /dev/nvram expects Here is another copy of the algorithm that had to be updated. Change-Id: I58659c7b8a89c89c76efdff405ee0620e7302277 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1852 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14Move HAVE_SMI_HANDLER from mainboards to chipsetsStefan Reinauer
Change-Id: Ibb6606fe3996e377181872a4544600f2d58c5439 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1834 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14VIA chipsets: fix compilation without real mode codeStefan Reinauer
The VIA chipsets CX700, VT8623 and VX800 required to be configured with real mode option rom code enabled. This patch fixes the issue and drops some unneeded header files. Change-Id: I0d8a3f8f99c2eacec7666f08f85b99f09c06af84 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1833 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14Tell CBMEM code about ACPI GNVS sectionStefan Reinauer
We moved GNVS to it's own section, but forgot to tell the cbmem code about it. This is purely cosmetical, but add it anyways. Change-Id: Icb3788c0325ea79cc1efff4a876412d07da7936e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1782 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14SMM: Fix save state searching for GSMIDuncan Laurie
The search for save state was comparing the entire RAX value when it needs to just operate on the bottom byte so it can find the GSMI command in bits 7:0 but not the extended command code in bits 15:8. Change-Id: I526c60e6b3732fa3680a17a4bed2a2ef23ccf94f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1774 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14SMM: Save the GNVS pointer when creating APCI tablesDuncan Laurie
At boot time when the ACPI tables are created and the location of GNVS is determined then save that address for resume time. This also sets the values of USB charging in S3/S5 to the expected default values for Stout/Butterfly that were not set correctly. Change-Id: I9b94b868aa6e81aced06c0262cc2697ad4faf1e6 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1768 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14SMM: Pass the ACPI GNVS pointer via state save mapDuncan Laurie
Instead of hijacking some random memory addresses to relay the GNVS pointer to SMM we can use EBX register during the write to APM_CNT register when the SMI is triggered. Change-Id: I79a89512c40353d72ad058cbf2e6a23a696945da Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1766 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14SMM: Avoid use of global variables in SMI handlerDuncan Laurie
Using global variables with the TSEG is a bad idea because they are not relocated properly right now. Instead make the variables static and add accessor functions for the rest of SMM to use. At the same time drop the tcg/smi1 pointers as they are not setup or ever used. (the debug output is added back in a subsequent commit) Change-Id: If0b2d47df4e482ead71bf713c1ef748da840073b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1764 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14SMM: Extract function for finding save state nodeDuncan Laurie
This is currently used by the ELOG GSMI interface but is a good way to pass data to SMM so move the current searching code to a separate function and make it a bit more versatile with the checks it does to find a match so it can be used in other situations. Change-Id: I5b6f92169f77c7707448ec38684cdd53c02fe0a5 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1763 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14SMM: Restore GNVS pointer in the resume pathDuncan Laurie
The SMM GNVS pointer is normally updated only when the ACPI tables are created, which does not happen in the resume path. In order to restore this pointer it needs to be available at resume time. The method used to locate it at creation time cannot be used again as that magic signature is overwritten with the address itself. So a new CBMEM ID is added to store the 32bit address so it can be found again easily. A new function is defined to save this pointer in CBMEM which needs to be called when the ACPI tables are created in each mainboard when write_acpi_tables() is called. The cpu_index variable had to be renamed due to a conflict when cpu/cpu.h is added for the smm_setup_structures() prototype. Change-Id: Ic764ff54525e12b617c1dd8d6a3e5c4f547c3e6b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1765 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14Sandybridge: Set PEG clock gatingMarc Jones
If the PEI System Agent doesn't run PCIe initialization, the PEG clock gating will not be setup. Add the PEG clock gating when pei_data->pcie_init is 0. Change-Id: I7e31bcebd11feb4807aa29b528adf09fb013c3ce Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1827 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14Add PCIe init and NMode flag to PEI data structureStefan Reinauer
The IvyBridge reference code does some slow and extensive PCIe init that we do not need on Link. Hence, add a flag to disable/enable running that init code from coreboot. NMode was used during bringup. We'll switch the setting back to auto, to let MRC decide the right thing. Change-Id: Ia989bb9ea079aadfeb41dc3029b7c2c623e84760 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1826 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14Add ddr3lv_support flag to pei_data structureDuncan Laurie
This will enable DDR3 1.35V support for memory training in the reference code. It requires the board to be setup for 1.35V with whatever board-specific GPIOs are available. Change-Id: I14e4686c20f9610f90678e6e3bece8ba80d8621a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1825 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14pei_data.h: Fix commentMarc Jones
I added a comment to the pei_data.h to remind users about how the OC pins are mapped. Change-Id: I4d74eb69fc78816a69e61260c2c9b2b3e58cafec Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1824 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14Provide MRC with a console printing callback functionVadim Bendebury
Let memory initialization code use the coreboot romstage console. This simplifies the code and makes sure that all output is available in /sys/firmware/log. The pei_data structure is modified to allow passing the console output function pointer. Romstage console_tx_byte() is used for this purpose. Change-Id: I722cfcb9ff0cf527c12cb6cac09d77ef17b588e0 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/1823 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-13Add spinlock to serialize Intel microcode updatesStefan Reinauer
Updating microcode on several threads in a core at once can be harmful. Hence add a spinlock to make sure that does not happen. Change-Id: I0c9526b6194202ae7ab5c66361fe04ce137372cc Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1778 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-13cros: Inform U-Boot via fake gpio when VGA Option ROM is loadedBill Richardson
This prepares the way for vboot to inform coreboot when it needs the VGA Option ROM loaded. Coreboot can't always know when it's needed (with keyboard-based dev-mode, coreboot can't tell if we're in dev-mode or not). By the time we get to U-Boot, it's too late, so we need two extra bits - one for vboot to tell coreboot to load the Option ROM and another for coreboot to let vboot know it's been done. This change sets up the communication, but doesn't act on it just yet. Even with this CL we always load the VGA Option ROM, so there's nothing to test. There should be no user-visible change. Change-Id: Ic4e9673a3707b6605064f4879bb3e74d4412322f Signed-off-by: Bill Richardson <wfrichar@chromium.org> Reviewed-on: http://review.coreboot.org/1822 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-13Export optionrom status on Stumpy/LumpyVadim Bendebury
ChromeOS' top of the tree u-boot expects coreboot to export information about option ROM status (started/not started). Stumpy and Lumpy were left behind and are not exporting this information. This CL fixes the problem. Change-Id: Id90035bd76ab177e4fc269efc2b74f15f641c77d Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/1713 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-13Make EmeraldLake2 work againDuncan Laurie
Fix GPIO exporting for new Vboot for oprom-matters GPIO and to make the power button static. Change-Id: Ic042c428a1d43512228c686121fa057d876606e1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1761 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-13Clean up stack checking codeStefan Reinauer
Several small improvements of the stack checking code: - move the CPU0 stack check right before jumping to the payload and out of hardwaremain (that file is too crowded anyways) - fix prototype in lib.h - print size of used stack - use checkstack function both on CPU0 and CPU1-x - print amount of stack used per core Signed-off-by: Stefan Reinauer <reinauer@google.com> Test: Boot coreboot on Link, see the following output: ... CPU1: stack: 00156000 - 00157000, lowest used address 00156c68, stack used: 920 bytes CPU2: stack: 00155000 - 00156000, lowest used address 00155c68, stack used: 920 bytes CPU3: stack: 00154000 - 00155000, lowest used address 00154c68, stack used: 920 bytes ... Jumping to boot code at 1110008 CPU0: stack: 00157000 - 00158000, lowest used address 00157af8, stack used: 1288 bytes Change-Id: I7b83eeee0186559a0a62daa12e3f7782990fd2df Reviewed-on: http://review.coreboot.org/1787 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-13Add method for delaying adding of timestampsStefan Reinauer
In hardwaremain() we can't add timestamps before we actually reinitialized the cbmem area. Hence we kept the timestamps in an array and added them later. This is ugly and intrusive and helped hiding a bug that prevented any timestamps to be logged in hardwaremain() when coming out of an S3 resume. The problem is solved by moving the logic to keep a few timestamps around into the timestamp code. This also gets rid of a lot of ugly ifdefs in hardwaremain.c Change-Id: I945fc4c77e990f620c18cbd054ccd87e746706ef Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1785 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-13Add Kconfig option to lock/unlock ME firmware during buildStefan Reinauer
For reasons of security and testing we want to be able to enable/disable ME section locking through a config option. Change-Id: I341c577cdae86be62c0e3d32bbd6b3333c004a5f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1798 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-13clean up lapic_cpu_init.cStefan Reinauer
- drop changelog and add license header instead - 80+ character fixes - make stacks array static because it's not used externally - rename copy_secondary_start_to_1m_below() Change-Id: I8b461bea21ee0ddd85ea3a3a923d1e15167f54f0 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1821 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-13Pass the CPU index as a parameter to startup.Ronald G. Minnich
This addition is in support of future multicore support in coreboot. It also will allow us to remove some asssembly code. The CPU "index" -- i.e., its order in the sequence in which cores are brought up, NOT its APIC id -- is passed into the secondary start. We modify the function to specify regparm(0). We also take this opportunity to do some cleanup: indexes become unsigned ints, not unsigned longs, for example. Build and boot on a multicore system, with pcserial enabled. Capture the output. Observe that the messages Initializing CPU #0 Initializing CPU #1 Initializing CPU #2 Initializing CPU #3 appear exactly as they do prior to this change. Change-Id: I5854d8d957c414f75fdd63fb017d2249330f955d Signed-off-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/1820 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-11-13Fix CONFIG_MAX_CPU set to 1 CPU build problemStefan Reinauer
There are some function dependancies that didn't work when MAX_CPU was set to 1 and the build would fail. Change-Id: I033a42056f7b48a40316e03772ed89ad9cb013fe Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1819 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-11-13Support better tracking of AP stack usage.Ronald G. Minnich
This change allows us to figure out how much of the AP stacks we are using, as well as to catch any case of an AP overrunning its stack. Also, the stack is poisoned, which is a good way to catch programming errors -- code should never count on auto variables being zerod. The stack bases are recorded in a new array, stacks. At the end, when all APs are initialized, the stacks are walked and the lowest level of the stack that is reached is printed. Build and boot and look for output like this: CPU1: stack allocated from 00148000 to 00148ff4:\ lowest stack address was 00148c4c CPU2: stack allocated from 00147000 to 00147ff4:\ lowest stack address was 00147c4c CPU3: stack allocated from 00146000 to 00146ff4:\ lowest stack address was 00146c4c Note that we used only about 1K of stack, even though in this case we allocated 4K (and in the main branch, we allocate 32K!) Change-Id: I99b7b9086848496feb3ecd207f64203fa69fadf5 Signed-off-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/1818 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-11-13SandyBridge/IvyBridge: Add IFD and ME firmware automaticallyStefan Reinauer
Right now coreboot's build process produces images that are not booting on actual hardware because they are smaller than the actual flash device and also don't have an IFD nor an ME firmware in them. In order to produce bootable images, you needed a wrapper script / extra step until now. With this change, the resulting coreboot.rom is actually bootable. Change-Id: I82714069fb004d4badc41698747a704bd9fed4da Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1771 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12vboot: Add option to skip TPM resume on S3 resumeStefan Reinauer
Change-Id: Ie4a98cc8af0dbcf09c7ace79668949ace5938c12 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1752 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12mmio pci config: Remove register constraintsAaron Durbin
The currently encoded register constraints fails compilation for SMM code or any code that compiles with -fPIC. The reason is that the ebx register is used for GOT base register. I don't believe the comment eluding to register constraints for AMD processors still applies. Therefore remove mmio_conf.h, and use the mmio methods in io.h. Change-Id: I391e5c2088ebc760b3a6ed6c37b65bbecab40a5c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/1801 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12cbfstool: Rework to use getopt style parametersStefan Reinauer
- Adding more and more optional and non-optional parameters bloated cbfstool and made the code hard to read with a lot of parsing in the actual cbfs handling functions. This change switches over to use getopt style options for everything but command and cbfs file name. - This allows us to simplify the coreboot Makefiles a bit - Also, add guards to include files - Fix some 80+ character lines - Add more detailed error reporting - Free memory we're allocating Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: Ia9137942deb8d26bbb30068e6de72466afe9b0a7 Reviewed-on: http://review.coreboot.org/1800 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12Initial IGD OpRegion implementationStefan Reinauer
Change-Id: I9e57c5792409830895a1147799acab95d910a336 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1757 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12romcc_io: add pci_or_configX functions.Aaron Durbin
Some of the modules use their own rolled pci_or_configX functions. Therefore, make them first class so everyone can use them without copying them. Change-Id: I9a4d3364c832548dbfe18139c27cce2d60c3316d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/1797 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12x86/Makefile.inc: Test if the strings are equal by single equal signZheng Bao
Double equal sign like "test a == b" works. It really does, except NetBSD. But I haven't found any clue in the manual for the command test about "==". Change-Id: I37254cfeb688fd1092f2e549d24f8eb270f02fd8 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1817 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-12If cmos is invalid, always set the rtc date and timeStefan Reinauer
If cmos is invalid for any reason, always set the date and time before marking RTC valid. Change-Id: Ib9d154802f75221d58bf28ba9c813f2529904596 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1790 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12Remove duplicate defines from mc146818rtc.cMarc Jones
Remove the duplicate #defines and use what is set in mc146818rtc.h. Change-Id: Ic471e03c68b591d19c0646fdbea78374af11c8b8 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1789 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12Avoid using hardcoded values in MRC cache codeVadim Bendebury
The MRC cache code, as implemented, in some cases uses configuration settings for MRC cache region, and in some cases - the values read from FMAP. These do not necessarily match, the code should use FMAP across the board. This change also refactors mrccache.c to limit number of iterations through the cache area and number of fmap area searches. Change-Id: Idb9cb70ead4baa3601aa244afc326d5be0d06446 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/1788 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12ivybridge: Catch unknown CPU revisionsStefan Reinauer
Adding an entry for 0x306a0 will make sure that all CPUs with CPUIDs 0x306aX will execute the driver (analog to Sandybridge behavior) Change-Id: I0353f3a48ecfd41274fdf6ee302c7d34482f1b5b Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1783 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12Store timestamps before resuming from suspendStefan Reinauer
in the resume case, timestamps were collected in RAM stage but not stored in CBMEM. This leads to only a single time stamp covering 200ms being available for all of ram stage. Change-Id: Ibf0bb92caf5e032c12fe4e1b9b84b3624d499511 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1781 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12Reduce default stack size to 4KStefan Reinauer
coreboot uses about 2K of stack on the BSP, and about 1K of stack on the APs. No reason to use an overdimensonal stack of 32k per core/thread. Change-Id: I734c240b992d40e1e35db3df5437c36da0a755cf Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1780 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12Add dependency for CONFIG_AP_IN_SIPI_WAITStefan Reinauer
Change-Id: Ia20c138dae1fc1382abe74303e1117472c513d1d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1779 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12SPI: Add early romstage SPI driver using hardware sequencingDuncan Laurie
This is a basic romstage driver that can be used for the MRC cache code on systems where we do not have the MRC cache stored in a flash region that is memory mapped. It uses the hardware sequencing interface to avoid having to know anything about the flash chip itself. BUG=chrome-os-partner:15031 BRANCH=stout TEST=manual: this was tested with debug code added to romstage that attempted to read the MRC cache at offset 0x3e0000. SPI READ offset=003e0000 size=64 buffer=ff7fba00 SPI ADDR 0x003e0000 SPI HSFC 0x3f00 SPI READ: 0=4443524d SPI READ: 1=00000bb0 SPI READ: 2=00008e24 SPI READ: 3=00000000 SPI READ: 4=001c8bbb SPI READ: 5=0c206466 SPI READ: 6=0a043220 SPI READ: 7=000058b4 SPI READ: 8=00000000 SPI READ: 9=00000000 SPI READ: 10=00100000 SPI READ: 11=00100005 SPI READ: 12=20202025 SPI READ: 13=000e0001 SPI READ: 14=00000000 SPI READ: 15=00000000 Change-Id: I5f78f53111f912ff5dda52bbf90fdc1824b82681 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1777 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12ELOG: Support for non-memory mapped flashDuncan Laurie
If the event log is stored in flash that is not memory mapped then it must use the SPI controller to read from the flash device instead of relying on memory accesses. In addition a new CBMEM ID is added to keep an resident copy of the ELOG around if needed. The use of CBMEM for this is guarded by a new CONFIG_ELOG_CBMEM config option. This CBMEM buffer is created and filled late in the process when the SMBIOS table is being created because CBMEM is not functional when ELOG is first initialized. The downside to using CBMEM is that events added via the SMI handler at runtime are not reflected in the CBMEM copy because I don't want to let the SMM handler write to memory outside the TSEG region. In reality the only time we add runtime events is at kernel shutdown so the impact is limited. Test: 1) Test with CONFIG_ELOG_CBMEM enabled to ensure the event log is operational and SMBIOS points to address in CBMEM. The test should involve at least on reboot to ensure that the kernel is able to write events as well. > mosys -l smbios info log | grep ^address address | 0xacedd000 > mosys eventlog list 0 | 2012-10-10 14:02:46 | Log area cleared | 4096 1 | 2012-10-10 14:02:46 | System boot | 478 2 | 2012-10-10 14:02:46 | System Reset 3 | 2012-10-10 14:03:33 | Kernel Event | Clean Shutdown 4 | 2012-10-10 14:03:34 | System boot | 479 5 | 2012-10-10 14:03:34 | System Reset 2) Test with CONFIG_ELOG_CBMEM disabled to ensure the event log is operational and SMBIOS points to memory mapped flash. The test should involve at least on reboot to ensure that the kernel is able to write events as well. > mosys -l smbios info log | grep ^address address | 0xffbf0000 > mosys eventlog list 0 | 2012-10-10 14:33:17 | Log area cleared | 4096 1 | 2012-10-10 14:33:18 | System boot | 480 2 | 2012-10-10 14:33:18 | System Reset 3 | 2012-10-10 14:33:35 | Kernel Event | Clean Shutdown 4 | 2012-10-10 14:33:36 | System boot | 481 5 | 2012-10-10 14:33:36 | System Reset Change-Id: I87755d5291ce209c1e647792227c433dc966615d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1776 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12SPI: Fix and enable Fast Read supportDuncan Laurie
- Fix handling of 5-byte Fast Read command in the ICH SPI driver. This fix is ported from the U-boot driver. - Allow CONFIG_SPI_FLASH_NO_FAST_READ to be overridden by defining a name for the bool in Kconfig and removing the forced select in southbridge config - Fix use of CONFIG_SPI_FLASH_NO_FAST_READ in SPI drivers to use #if instead of #ifdef - Relocate flash functions in SMM so they are usable. This really only needs to happen for read function pointer since it uses a global function rather than a static one from the chip, but it is good to ensure the rest are set up correctly as well. Change-Id: Ic1bb0764cb111f96dd8a389d83b39fe8f5e72fbd Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1775 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12Fix gcc-4.7 building problem.Han Shen
Applied function attribute to function definition to avoid 'conflicting type' warning. Function declaration is in src/include/cpu.h void secondary_cpu_init(unsigned int cpu_index)__attribute__((regparm(0))); But function definition in lapic_cpu_init.c is missing the "__attribute__" part. Change-Id: Idb7cd00fda5a2d486893f9866920929c685d266e Signed-off-by: Han Shen <shenhan@google.com> Reviewed-on: http://review.coreboot.org/1784 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-12Add bd82x6x mainboards ASPM overrides.Marc Jones
The Intel PCH can override the ASPM settings via the MPC2 register. Add a chip override for F0-F7. Mainboards may implement this as needed. This also fixes the final PM setup being done too early. It was being done prior to the PCIe ASPM setup, which happens in the bridge scan. Change-Id: Idf2d2374899873fc6b1a2b00abdb683ea9f5bd6b Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1796 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-12SPI: Configure Software Sequence SPI Freq to match descriptorDuncan Laurie
Right now the SPI bus is getting set to 20mhz for transactions initiated with the software sequence interface. In order to be able to do reasonable fastread/write/erase we can bump this up to a higher value at boot before it gets locked at 20mhz. To do this read out the speed set in the SPI descriptor for hardware sequencing and apply it to software sequencing. Change-Id: I79aa2fe7f30f734785d61955ed81329fc654f4a4 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/1773 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-12SPI: Add Fast Read to the OPMENU for locked down SPIDuncan Laurie
The chips we are using do not use BE52 (block erase 0x52) so we can use that opcode menu location to enable fast read. Change-Id: I18f3e0e5e462b052358654faa0c82103b23a9f61 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/1772 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-12oprom: Ensure that mode information is valid before putting it in the tables.Gabe Black
At least when CONFIG_CHROMEOS is turned on, it's possible for CONFIG_FRAMEBUFFER_KEEP_VESA_MODE to be set but for there not to be any valid information to put into the framebuffer coreboot table. That means that what's put in there is junk, probably all zeroes from the uninitialized global variable the mode information is stored in (mode_info). When a payload uses libpayload and turns on the coreboot framebuffer console, that console will attempt to scroll at some point and decrease the cursor's y coordinate until it is less than the number of rows claimed by the console. The number of rows is computed by taking the vertical resolution of the framebuffer and dividing it by the height of the font. Because the mode information was all zeroes, the coreboot table info is all zeroes, and that means that the number of rows the console claims is zero. You can't get the unsigned y coordinate of the cursor to be less than zero, so libpayload gets stuck in an infinite loop. The solution this change implements is to add a new function, vbe_mode_info_valid, which simply returns whether or not mode_info has anything in it. If not, the framebuffer coreboot table is not created, and libpayload doesn't get stuck. Change-Id: I08f3ec628e4453f0cfe9e15c4d8dfd40327f91c9 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1758 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-12Define post codes for OS boot and resumeDuncan Laurie
And move the pre-hardwaremain post code to 0x79 so it comes before hardwaremain at 0x80. Emit these codes from ACPI OS resume vector as well as the finalize step in bd82x6x southbridge. Change-Id: I7f258998a2f6549016e99b67bc21f7c59d2bcf9e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1702 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-12Pass correct sleep type to mainboard sleep handlerStefan Reinauer
The sleep type is 5 for S3 and 7 for S5. Change-Id: I7ffdb3d27b6994ac4a12a343caf4d7abb82fe6ca Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1760 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-12ACPI: Zero pstate/cstate control values in FADTDuncan Laurie
If these values are non-zero then the kernel will issue an SMI for each core (cstate) and package (pstate). Since we don't do anything with these SMI callbacks we can avoid taking the extra SMIs at boot time by zeroing these fields. Change-Id: I3bc5fe0a9f45141d46884cb77ecdfaeaa45d2439 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1769 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-12Initialize the VMX MSRMarc Jones
The VMX MSR may come up with random values and needs to be initialized to zero. This was done incorrectly in finalize_smm. It must be done on a per core basis in the general CPU init. This touches all Sandybridge and Ivybridge configs. Change-Id: I015352d0f8e2ebe55ac0a5e9c5bbff83bd2ff86b Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1794 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-12Revert "Remove code that enables/disables VMX in coreboot on chromebooks."Marc Jones
The MSR for VMX can start with a random value and needs to be cleared by coreboot. I am reverting this change, as it handles almost everything and doing a follow-on change to fix the improper clearing of the MSR. Change-Id: Ibad7a27b03f199241c52c1ebdd2b6d4e81a18a4e Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1793 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-12sandybridge: Correct reporting of cores and threadsStefan Reinauer
The reporting of cores and threads in the system was a bit ambiguous. This patch makes it clearer. Change-Id: Ia05838a53f696fbaf78a1762fc6f4bf348d4ff0e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1786 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-09Make coreboot use the offset parameter in cbfstool createStefan Reinauer
On Sandybridge and Ivybridge systems the firmware image has to store a lot more than just coreboot, including: - a firmware descriptor - Intel Management Engine firmware - MRC cache information This option allows to limit the size of the CBFS portion in the firmware image. Change-Id: Ib87fd16fff2a6811cf898d611c966b90c939c50f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1770 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09Prevent inclusion of tsc.h when not neededVadim Bendebury
src/include/timestamp.h is an interface describing timestamp storage in coreboot. Exporting this interface is complicated by inclusion of tsc.h which is needed only for the API and is not used in structure definitions. Including this dependency only when needed fixes the problem. Change-Id: Ie6b1460b1dab0f5b5781cb5a9fa89a1a52aa9f17 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/1753 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-09PCH: Add register descriptions used by IGD OpRegionStefan Reinauer
These bits are used by the IGD OpRegion code Change-Id: I89a11fc5021d51e0c1675ba56f6a3bc3b79bb8aa Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1751 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-09Add IGD Opregion variables to NVSStefan Reinauer
In order to support Intel's IGD Opregion standard, we need an additional set of flags shared between firmware, ACPI, SMM, and the graphics driver. Change-Id: I1a9b8dff5e5ee8d501b6672bc3bcca39ea65572e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1750 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09Make register/value lists constStefan Reinauer
These can be stored in the code segment, since it's never changed. Change-Id: I8b3827838e08e6cc30678aad36c39249fbca0c38 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1749 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-09Get rid of hard coded strings in ACPI tablesStefan Reinauer
(cosmetical) Change-Id: I3e01d8fbf2d71abcfcbe47efedd2184566c91df7 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1748 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-09Add Gigadevice SPI rom supportMartin Roth
Add support for GigaDevice SPI ROMS. The GD25Q64B device has been tested, the other rom devices added to the file have not. Change-Id: If35676ca6b90329f15667ebb32efa0d1a159ae91 Signed-off-by: Martin Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/1747 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09ELOG: Add EC events to elog headerDuncan Laurie
These events were initially for Chrome EC but they can be applied to any EC. Change-Id: I0eba9dbe8bde506e7f9ce18c7793399d40e6ab3b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1746 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09SPI: re-init SMM SPI driver after lockdownDuncan Laurie
If the driver is initialized before the lockdown then it will fail to work after the lockdown bit is set. Change-Id: Idc05d33d8d726bf29cb3c9b1b4604522bd64170a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1745 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-09Change flashmap base to reflect new FMAP in U-bootDuncan Laurie
The RO_FMAP base moved from 0x5f0000 to 0x610000. Also update Kconfig default and add a descripton so the default can be changed by boards. Change-Id: I0caad0ce6e6f19750dbbf042a5a489b558f62b96 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1705 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-09mc146818rtc: Remove the hyphen to build on NetBSD and DarwinZheng Bao
http://netbsd.gw.com/cgi-bin/man-cgi?date++NetBSD-current The NetBSD manual tells us the date in NetBSD doesn't take any flags to enable or disable padding in the format. By default, date pads numeric fields with zeroes. This will convert the number to octal one. So add "0x" to convert it to BCD directly. Change-Id: Icd44312acf01b8232f1da1fbaa70630d09007b40 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1804 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-09mc146818rtc: Update the Day of Week in CMOS in the right way.Zheng Bao
The range of weekday in CMOS is 01-07, while the Sunday is 1, and Saturday is 7. The comand date in coreutils defines %u day of week (1..7); 1 is Monday %w day of week (0..6); 0 is Sunday There are 1 day offset for each week day. So we use "%w" and plus 1 before we update the weekday in CMOS. Change-Id: I3fab4e95f04924ff0ba10a7012b57da1d3f0d1a5 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1802 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-08mainboard/roda/rk886ex: Disable CHECK_SLFRCS_ON_RESUMENico Huber
This makes resume from S3 work again. The check is new and fails on other boards, too. Change-Id: I0ada569e4ba649b9ac82768b0888e16104c621e8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1809 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-08Log unexpected post code from the previous bootDuncan Laurie
Read out the post code from the previous boot and log it if the code is not one of the expected values. Test: 1) interrupt the boot of the system, this is easiest with warm reset button when servo is attached 2) check the event log with mosys 65 | 2012-09-09 12:32:11 | Last post code in previous boot | 0x9d Change-Id: Id418f4c0cf005a3e97b8c63de67cb9a09bc57384 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1744 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-08Add support for storing POST codes in CMOSDuncan Laurie
This will use 3 bytes of CMOS to keep track of the POST code for the current boot while also leaving a record of the previous boot. The active bank is switched early in the bootblock. Test: 1) clear cmos 2) reboot 3) use "mosys nvram dump" to verify that the first byte contains 0x80 and the second byte contains 0xF8 4) powerd_suspend and then resume 5) use "mosys nvram dump" to verify that the first byte contains 0x81 and the second byte contains 0xFD Change-Id: I1ee6bb2dac053018f3042ab5a0b26c435dbfd151 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-08x86 memcpy: Copy 4 bytes at onceStefan Reinauer
This is a slight improvement over the rep movsb loop Change-Id: Id71d9bfe5330b154a5c62fac85ce3955ae89b057 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1742 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-08RTC: Don't clear pending interrupt in resume pathDuncan Laurie
The linux kernel relies on the RTC reporting pending interrupts if the RTC alarm was used to wake the system. If we clear these flags here then the rtc-cmos driver in the kernel will think that no interrupts are pending and will not re-start the timerqueue to handle the alarm timerqueue node. This flag doesn't exist in SMM but the rtc code is compiled there. Since rtc_init() is not called by SMM it is guarded with an ifdef. I performed several thousand suspend/resume cycles without seeing an issue where hwclock was unable to read from /dev/rtc. There still is a potential kernel issue where the timerqueue can stall but this makes that much less likely to happen on resume. Change-Id: I5a343da4ce5c4c8ec4783b4e503869ccfa5077f0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1741 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-08smi: make tseg_relocate check pointer offsetDuncan Laurie
In case tseg_relocate() is called again on a pointer we should not relocate it again. Change-Id: Ida1f9c20dc94b448c773b14d8864afe585369119 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1740 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-08elog: add extended management engine eventDuncan Laurie
We are seeing ME disabled and ME error events on some devices and this extended info can help with debug. Also fix a potential issue where if the log does manage to get completely full it will never try to shrink it because the only call to shrink the log happens after a successful event write. Add a check at elog init time to shrink the log size. Change-Id: Ib81dc231f6a004b341900374e6c07962cc292031 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1739 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-08spi: fix erase in SMM while SPIBAR is lockedDuncan Laurie
The handling of write enable was not entirely correct, the opcode needs to be skipped when the controller is locked down. Addresses were not getting set properly for erase commands which seemed to mostly work when the previous command had set an address. Tested by adding events to the event log at runtime on a freslhy flashed device (with locked down SPI controller) until the log log shrink happens to ensure it does not hang: hexdump -C elog.event.kernel_clean 00000000 01 00 00 00 ad de 00 00 00 00 for x in $(seq 1 232); do cat elog.event.kernel_clean > /sys/firmware/gsmi/append_to_eventlog done mosys eventlog list | tail -6 154 | 2012-09-01 13:54:43 | Kernel Event | Clean Shutdown 155 | 2012-09-01 13:54:43 | Kernel Event | Clean Shutdown 156 | 2012-09-01 13:54:43 | Kernel Event | Clean Shutdown 157 | 2012-09-01 13:54:43 | Kernel Event | Clean Shutdown 158 | 2012-09-01 13:54:43 | Log area cleared | 1030 159 | 2012-09-01 13:54:43 | Kernel Event | Clean Shutdown Change-Id: I3a50dae54422a9ff37daefce3632f8bcbe4eb89f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1717 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-08Make option rom init more verboseStefan Reinauer
When bringing up VGA by running the option rom it's sometimes useful to get more information about the mode that gets set, or the reason why the mode could not be set or a picture could not be displayed. Also prefix the output from VBE mode setting with VBE: Copying VGA ROM Image from fff0fd78 to 0xc0000, 0x10000 bytes Real mode stub @00000600: 867 bytes Calling Option ROM... int15_handler: INT15 function 5fac! ... Option ROM returned. VBE: Getting information about VESA mode 4161 VBE: resolution: 1280x1024@16 VBE: framebuffer: d0000000 VBE: Setting VESA mode 4161 VGA Option ROM has been loaded Change-Id: I2be11f095dc62ed3c99e0d4272ad9d6521608a44 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1714 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-08ELOG: Find flash base in FMAP if possibleDuncan Laurie
Now that we have FMAP support in coreboot use it to find the offset in flash for ELOG to use. If coreboot has elog configured with a smaller size then use that over the FMAP size. This is because I set aside a 16KB region in the FMAP but we only use 4KB of it to keep the impact to boot/resume speed to a minimum. FMAP: Found "FMAP" version 1.0 at ffe10000. FMAP: base = 0 size = 800000 #areas = 32 FMAP: area RW_ELOG found FMAP: offset: 3f0000 FMAP: size: 16384 bytes FMAP: No valid base address, using 0xff800000 ELOG: base=0x003f0000 base_ptr=0xffbf0000 ELOG: MEM @0x00190ad8 FLASH @0xffbf0000 ELOG: areas are 4096 bytes, full threshold 3072, shrink size 1024 Change-Id: I3d826812c0f259d61f41b42797c58dd179f9f1c8 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1706 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-07ELOG: Don't disable SPI controller lockdownDuncan Laurie
Now that WREN prefix is handled properly ELOG is able to write when the SPI controller is locked down. To test, ensure that runtime SPI write via ELOG is successful by checking the event log for a kernel shutdown reason code: 5 | 2012-08-27 11:09:48 | Kernel Event | Clean Shutdown 6 | 2012-08-27 11:09:50 | System boot | 26 7 | 2012-08-27 11:09:50 | System Reset Change-Id: If6d0dced7cb0f5ca7038b3d758f31b856826d30b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1712 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07SPI: opmenu special case for WREN as atomic prefixDuncan Laurie
The code that attempts to use the opmenu needs to have a special case for write enable now that it is handled as an atomic prefix and not as a standalone opcode. To test, ensure that runtime SPI write via ELOG is successful by checking the event log for a kernel shutdown reason code: 5 | 2012-08-27 11:09:48 | Kernel Event | Clean Shutdown 6 | 2012-08-27 11:09:50 | System boot | 26 7 | 2012-08-27 11:09:50 | System Reset Change-Id: I527638ef3e2a5ab100192c5be6e6b3b40916295a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1710 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07RTC: Write build date in BCD when clearing RTC CMOSDuncan Laurie
Check the RTC on boot after RTC battery failure and ensure that the reported build date matches what is reported: > grep ^rtc /proc/driver/rtc rtc_time : 01:00:21 rtc_date : 2012-08-16 Change-Id: If23f436796754c68ae6244ef7633ff4fa0a93603 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1709 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07SMI: Change order of SMI_EN and PM1_EN initDuncan Laurie
This appears to fix an infrequent resume hang on Ivybridge. Tested on 2 devices with 15k suspend/resume cycles each Change-Id: I53618bc7966824413f1720a2be3cbd2550e29473 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1704 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07EC: Prepare to read and log last post code from previous bootDuncan Laurie
(elog portion, support in EC code pending) - Use a new EC command to read the last post code from the previous boot - If the post code is not well-known final boot or resume code then log it Change-Id: Id6249e9a182243eb87c777edd56f48de72125e77 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1703 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07SandyBridge/IvyBridge: Use flash map to find MRC cacheStefan Reinauer
Until now, the MRC cache position and size was hard coded in Kconfig. However, on ChromeOS devices, it should be determined by reading the FMAP. This patch provides a minimalistic FMAP parser (libflashmap was too complex and OS centered) to allow reading the in-ROM flash map and look for sections. This will also be needed on some partner devices where coreboot will have to find the VPD in order to set up the device's mac address correctly. The MRC cache implementation demonstrates how to use the FMAP parser. Change-Id: I34964b72587443a6ca4f27407d778af8728565f8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1701 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07Add missing newline in error messageStefan Reinauer
This is purely cosmetic. All error messages in the Sandybridge raminit code printed a newline at the end. Change-Id: I880d291928291d487039850a2a3d53a1101124ba Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1699 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07rtc: add explicit dependency on build.hVincent Palatin
build.h is generated at build time, with highly parallel builds, we might try to compile the rtc driver too early. Change-Id: I9a2681484d58b67ed3061669fbdf52ac5ad14dab Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: http://review.coreboot.org/1698 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07rtc: erase CMOS memory after power failureVincent Palatin
When a power failure happens on the RTC rail, the CMOS memory (including the RTC registers) is filled with garbage. So, we erase the full first bank (112 bytes) and we reset the RTC date to the build date. To test, disconnect the CMOS battery to produce an RTC power failure, then boot the machine and observe the RTC date is the build date using "cat /sys/class/rtc/rtc0/date" Change-Id: I684bb3ad5079f96825555d4ed84dc0f7914e9884 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: http://review.coreboot.org/1697 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07AMD G34 CPU: change lapic_id in northbridge.c to accommodate G34 CPUSiyuan Wang
Each G34 socket has two node. Previous lapic algorithm is written for the CPU which has one node per socket. I test the code on h8qgi with 4 family 15 CPUs(8 cores per CPU). The topology is: socket 0 --> Node 0, Node 1 socket 2 --> Node 2, Node 3 socket 1 --> Node 4, Node 5 socket 3 --> Node 6, Node 7 Each node has 4 cores. I change the code according to this topology. Change-Id: I45f242e0dfc61bd9b18afc952d7a0ad6a0fc3855 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1659 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-07CMOS: Move MRC seed offset into upper bankDuncan Laurie
This will allow the lower bank to be cleared without impacting the ability to suspend/resume. Change-Id: Iaec3c9e7e40c334053c814eaddd1f614df245a73 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1696 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07rtc: force mc146818 register D to a correct valueVincent Palatin
On Panther Point PCH (and maybe cougar point), when some of the register D reserved bits are set, the RTC starts misbehaving (e.g. incrementing the year byte every second). There are probably undocumented features implemented behind those bits. Let's reset register D to a known state to ensure we get the expected RTC behavior. Change-Id: I7e2c2a2c6130a974bccb3d760b41eaa579a58b67 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: http://review.coreboot.org/1695 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07Fix CONFIG_ use in i8254.cStefan Reinauer
We always define CONFIG_ variables, even if they're not set. Hence, remove the check whether CONFIG_UDELAY_TIMER2 is defined Change-Id: Iefdf2389941f2cc63ae4f13ac6b213da4c96b201 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1694 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 07:17:19 +0000