summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2018-08-10mb/gigabyte/ga-{h61m-s2pv,b75m-d3h,b75m-d3v}: Clean up mainboard codeAngel Pons
I ported ga-h61m-s2pv based on the two Gigabyte b75m boards. Based on another mainboard's code review comments, this patch improves the code quality of these three similar boards. ga-h61m-s2pv is tested and confirmed to be working, but I cannot say the same regarding the other two mainboards as I do not have them. Change-Id: Ib7747cceb5ba56f791677204cdc4c54c129c70c3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/27211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-08-10fit: Handle decompression errors properlyPatrick Rudolph
Set payload to NULL in case of decompression errors. Fixes the attempt to boot a kernel that couldn't be decompressed. Change-Id: I3a602b0e90923a0b5a3683c4a0adf9e4733d5a2a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-10src/soc/intel: Add new device IDs to support coffeelakeMaulik
1. Add new device IDs for SATA, GT and Northbridge to pci_ids.h 2. Add entry to identify CFL U GT and CPU to respective files 3. Add entry to identify CFL U to report_platform.c BUG=none BRANCH=none TEST=Boot to CFL U RVP board with this patch and check if coreboot is able to enumerate various devices and display correct component names properly in serial logs. Change-Id: I47c97fb9eb813587cd655e2bce05a686091619ed Signed-off-by: Maulik <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/27522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-08-10arm64: Turn architectural register accessors into inline functionsJulius Werner
Accesses to architectural registers should be really fast -- they're just registers, after all. In fact, the arm64 architecture uses them for some timing-senstive uses like the architectural timer. A read should be: one instruction, no data dependencies, done. However, our current coreboot framework wraps each of these accesses into a separate function. Suddenly you have to spill registers on a stack, make a function call, move your stack pointer, etc. When running without MMU this adds a significant enough delay to cause timing problems when bitbanging a UART on SDM845. This patch replaces all those existing functions with static inline definitions in the header so they will get reduced to a single instruction as they should be. Also use some macros to condense the code a little since they're all so regular, which should make it easier to add more in the future. This patch also expands all the data types to uint64_t since that's what the actual assembly instruction accesses, even if the register itself only has 32 bits (the others will be ignored by the processor and set to 0 on read). Arm regularly expands registers as they add new bit fields to them with newer iterations of the architecture anyway, so this just prepares us for the inevitable. Change-Id: I2c41cc3ce49ee26bf12cd34e3d0509d8e61ffc63 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-10arm64: Drop checks for current exception level, hardcode EL3 assumptionJulius Werner
When we first created the arm64 port, we weren't quite sure whether coreboot would always run in EL3 on all platforms. The AArch64 A.R.M. technically considers this exception level optional, but in practice all SoCs seem to support it. We have since accumulated a lot of code that already hardcodes an implicit or explicit assumption of executing in EL3 somewhere, so coreboot wouldn't work on a system that tries to enter it in EL1/2 right now anyway. However, some of our low level support libraries (in particular those for accessing architectural registers) still have provisions for running at different exception levels built-in, and often use switch statements over the current exception level to decide which register to access. This includes an unnecessarily large amount of code for what should be single-instruction operations and precludes further optimization via inlining. This patch removes any remaining code that dynamically depends on the current exception level and makes the assumption that coreboot executes at EL3 official. If this ever needs to change for a future platform, it would probably be cleaner to set the expected exception level in a Kconfig rather than always probing it at runtime. Change-Id: I1a9fb9b4227bd15a013080d1c7eabd48515fdb67 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-10arm64: Remove set_cntfrq() functionJulius Werner
CNTFRQ_EL0 is a normal AArch64 architectural register like hundreds of others that are all accessed through the raw_(read|write)_${register}() family of functions. There's no reason why this register in particular should have an inconsistent accessor, so replace all instances of set_cntfrq() with raw_write_cntfrq_el0() and get rid of it. Change-Id: I599519ba71c287d4085f9ad28d7349ef0b1eea9b Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27947 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-10marvell: Remove 'mvmap2315' SoCJulius Werner
I'm pretty sure this SoC doesn't actually exist. Change-Id: I53e268ee1795e524a2a4562d67a2b9f28af966d1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27965 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-10google: Remove board 'rotor'Julius Werner
Rotor is dead, long live [PROJECT NAME REDACTED]! Change-Id: Ia9308944257255e077a44c1df262c7f49c69890c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27964 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09mb/google/octopus: add support for fetching DRAM part number from CBIAaron Durbin
Add 3 new Kconfig options: DRAM_PART_NUM_IN_CBI DRAM_PART_NUM_ALWAYS_IN_CBI DRAM_PART_IN_CBI_BOARD_ID_MIN These control whether to 1. attempt to use CBI at all 2. always use cbi and 3. conditionally use cbi based on board id. The intent is that the MIN variant would be used for the tranisition period then cut over to ALWAYS after full transition. Since multiple OEMs have different schedules these options are there to bridge the gap. yorp. bip, and octopus build targets would never flip DRAM_PART_NUM_IN_CBI, but in case someone does the MIN values are 255 to always take the old path. BUG=b:112203105 TEST=Set correct part number on phaser during testing. Change-Id: If9a0102806d78e89330b42aa6947d503a8a2deac Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/27946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-09arch/x86/tables.c: Avoid static analysis error for unused valueRichard Spiegel
Within procedure arch_write_tables, the pointer "rom_table_end" is updated every time a table is created. However, after creating last table, pointer rom_table_end is not used, though it is updated. Add a "(void)rom_table_end;" at the end to avoid the static analysis error. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: I8a34026795c7f0d1bb86c5f5c0469d40aa53994a Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09cpu/x86/mp_init.c: Avoid static analysis error for unused valueRichard Spiegel
Within procedure save_bsp_msrs, the structure pointer "msr_entry" is updated every time procedure save_msr() is called. However, after the last call of save_msr(), "msr_entry" is not used, thus causing a static analysis error. Add a "(void)msr_entry;" at the end to avoid the static analysis error. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: If0fb336fbf49eec3da255fadbe38b3a38768d0cf Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09src/cpu: Fix typoElyes HAOUAS
Change-Id: I13dec72b2de2a525d45909e697c33fbdc31111cb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09src/device: Fix typoElyes HAOUAS
Change-Id: I65e57b37db9649b30ca25b2150f21ebffee73105 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27917 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09src/ec/google/chromeec: Fix typoElyes HAOUAS
Change-Id: Ia05c9c5233319fe74d81c1f1db6ca3c2d875f9e7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09src/include: Fix typoElyes HAOUAS
Change-Id: Iff445dccf29957078b8308d73fb302d03cf47d31 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09src/lib: Fix typoElyes HAOUAS
Change-Id: Ie5bf036a63a254dd95b45a0823086c8079eeafe2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27913 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09src/mainboard: Fix typoElyes HAOUAS
Change-Id: Ief6a04ccb63658b5fb03cd1d298bf00948cf7410 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09src/arch: Fix typoElyes HAOUAS
Change-Id: I24d219b4ce6033f64886e22973ca8716113d319f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09src/northbridge: Fix typoElyes HAOUAS
Change-Id: I00094028036f33892362b935899e1bceef1da625 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09src/security/vboot: Fix typoElyes HAOUAS
Change-Id: Ie98ee00a83d837b6d6491fed3a474048dc23e104 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27910 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09src/soc: Fix typoElyes HAOUAS
Change-Id: I8053d0f0863aa4d93692487f1ca802195c2d475f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09src/superio: Fix typo and remove unneeded whitespaceElyes HAOUAS
Change-Id: Iadc28d1632aa9b7d0b028c229049a348d5c07882 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09google/grunt: Override BayHub EMMC driving strengthKevin Chiu
Careena EVT SanDisk EMMC sku has high fail rate of 0x5B reboot failure. It'll need to increase 1.8V EMMC CLK/CMD, Data driving strength for this issue. CLK[6:4] CMD,DATA[3:1] original register value: 0x6B enhanced: 0x7F BUG=b:111964336 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I3db38ff12c566c258895c6643008a0472ca528bb Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/27816 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09drivers/spi/spi_flash.c: Check input parameterRichard Spiegel
In procedure spi_flash_cmd_erase(), parameter "len" is not validated and could lead to the return of an invalid (non-initialized) value. Validate the parameter early on. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: I0b5129a15c9e0ea45f4dba4ab0729196cb64699b Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09src/device/pci_rom.c: Remove double initializationRichard Spiegel
In procedure pci_rom_probe(), variable vendev is initialized twice. Remove one initialization. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: I8a71aa1aea2047ab2d98e09d1d6610de552b6cb4 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27949 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09arch/x86/exception.c: Remove double initializationRichard Spiegel
In procedure exception_init(), structure pointer gates is initialized twice. Remove one initialization. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: If0280963e8b796f795e77a11569277dcf16b4507 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27948 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09cpu/x86/mp_init.c: Fix error treatmentRichard Spiegel
In procedure allocate_cpu_devices(), if structure pointer new is null skip using the pointer. Add a "continue;" to skip using the pointer. The issue was found by static analysis tool. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: I7011fbfa0725f22a6dfbca6752e668eddac3463c Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27951 Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09mb/google/octopus: remove disable_periodic_retraining optionsAaron Durbin
The Micron material that was broken has long since been fixed that required this option. glkrvp had these stale entries and were subsequently copied to octopus. Remove the need for this option. BUG=b:35581751 Change-Id: Id73584367c2ad0e4958b5ea0f04a28e5fc82d085 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/27959 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09cpu/intel/smm: Make sure SMRR base is aligned to SMRR sizeArthur Heymans
If TSEG_BASE is not TSEG_SIZE aligned the SMRR settings are invalid, therefore guard against this. Change-Id: I48f55cdac5f4b16b9a8d7a8ef3a84918e756e315 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-09rk3288: Dig up two more KB of SRAM from under the couch cushionsJulius Werner
RK3288 has always been notoriously low on SRAM, to the point where its boards have less than 100 bytes left in both their bootblock/verstage sections. This becomes a problem every time we try to add a tiny amount of code to common coreboot interfaces that are included in them. This patch manages to add another KB to each, one from the CBMEM console (which now might get cut off a bit, but that's life) and one by moving the TTB_SUBTABLES to PMUSRAM. PMUSRAM is a weird world where write accesses must always be exactly 4 bytes long or they hang the CPU, so we mostly ignore it... but thankfully, page table entries are exactly 4 bytes long and that's the only thing we write to this region, so it works out in this case. Change-Id: I5aecd66db40b3f52299b270322b8c8784dbe7e6f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-08-09drivers/spi/winbond: Improve structure packingPatrick Rudolph
Use bitfields to pack the struct more tightly. Change-Id: If1e7a5a3a9504327f987403ec0a7b79b2383792a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27815 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09superio: fix and extend pnp_info of wpcd376iStefan Tauner
The implementation of wpcd376i in coreboot is based on the superiotool output which apparently was incorrect. This patch refines the implementation to match the datasheet. Change-Id: I0108e912dc4f603276074f0999c6d3146c3b13f9 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/27857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-09lib/edid.c: Avoid static analysis error for unused valueRichard Spiegel
Within procedure cea_hdmi_block, the variable "b" is used as an index into a buffer of EDID bytes. At the end, it's incremented but not used, thus causing a static analysis error. Add a "(void)b;" at the end to avoid the static analysis error. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: Ibd0b4a21bf82fcc46a627bc75564a850b7374989 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27929 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09mb/google/poppy/variants/atlas: Do not override icc_maxCaveh Jalali
Skylake SoC code now sets the icc_max based on the CPU SKU, so we should not hard-code it in the device tree. BUG=b:110890675 BRANCH=None TEST=boots on atlas Change-Id: I7eb3499b7bea9ab2c49e1f299e2dbb688c8d1c33 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Gaggery Tsai <gaggery.tsai@intel.com>
2018-08-08security/tpm: Report tpm_unmarshal_response warningRichard Spiegel
In procedure tpm_unmarshal_response(), variable "rc" is used early to decide if it should return NULL. Later however, the code proceeds to its end even if one subroutine reports error. If "rc" is not 0, report that there was a partial error in the procedure. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: I7575bc75104fd97f138224aa57561e68f6548e58 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27931 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-08security/vboot: Split fwid.region build targetRaul E Rangel
Add the ability to specify the fwid version via a file instead of via config. This makes it so when doing an incremental build all objects are not invalidated when bumping the fwid. The coreboot ebuild will create this file to pass the latest version. BUG=b:112267918 TEST=ran dmidecide -t 0 and verified version was present Change-Id: I955106efd648a75a1311f24ede46bd238d1517e0 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-08-08mainboard/google/kahlee: Set SYSTEM_TYPE_LAPTOPRaul E Rangel
This configures the ACPI FADT perferred power management profile to PM_MOBILE instead of PM_DESKTOP. I'm not sure what impact this actually has. I just noticed the other boards have it set. BUG=b:110971913 TEST=Made sure SYSTEM_TYPE_LAPTOP shows up in coreboot.config Change-Id: Iea1b8359b80d167e69745358f543f025713294ba Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-08soc/amd/stoneyridge: Prevent reboot in romstageRaul E Rangel
By setting this register in bootblock AmdInitEnv will no longer trigger a reset in romstage. This fixes a few vboot test failures and also speeds up boot time. BUG=b:111610455 TEST=Built grunt and made sure bootblock only happens once on cold boot, and S3 resume. Change-Id: Ie19f7a14deaef45ac63156bec6946273c1b9447e Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-08amd/stoneyridge: Dump MCA registersMarshall Dawson
Add a function to provide a rudimentary dump of the Machine Check Architecture registers. These values survive a warm reset. BUG=b:65445599 TEST=Verify on a Grunt having propensity for #MC errors Change-Id: Ib6875cabe3041e65c811d8b2232f7ac6bedd1a02 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/27926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-08amd/fam15: Add MCA bank register definitionsMarshall Dawson
Define the additional registers used for each Machine Check Architecture bank. Change-Id: I962f23662789a3b974f4946555f67fcfc6147df8 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/27925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-08amd/stoneyridge: Add warm reset detectionMarshall Dawson
Extend the existing reset handling features in Stoney Ridge to plan for, and recognize, warm resets. The ColdRstDet bit is always zero on a cold reset, and is intended as a mechanism for the BIOS to determine the type of a reset that occurred. Set ColdRstDet=1 after all cores have been initialized, so that any subsequent reset may be identified as warm/cold. A later patch will check the value during mp_init. Change-Id: I90255918de03018c9f090bff1e56a8bda5e7365e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/27924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-08cpu/amd: Correct number of MCA banks clearedMarshall Dawson
Use the value discovered in the MCG_CAP[Count] for the number of MCA status registers to clear. The generations should have the following number of banks: * Family 10h: 6 banks * Family 12h: 6 * Family 14h: 6 * Family 15h: 7 * Family 16h: 6 Change-Id: I0fc6d127a200b10fd484e051d84353cc61b27a41 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/27923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-08cpu/amd: Improve formattingMarshall Dawson
Remove for() braces from around single lines. Remove extra blank lines. This cleans up checkpatch problems in a subsequent patch. Change-Id: I329ac03365e51799581c56eed27ee54de6826f14 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/27935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-08cpu/amd: Rename MCA status registerMarshall Dawson
Change the defined name of MCI_STATUS (i.e. MCi_STATUS) to reflect its MC0_STATUS address. Change-Id: I97d2631a186965bb8b18f544ed9648b3a71f5fb0 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/27922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-08ec/google/chromeec: add support for retrieving DRAM part numberAaron Durbin
The DRAM part number can be stored in the CBI data. Therefore, add support for fetching the DRAM part number from CBI. BUG=b:112203105 TEST=Fetched data from CBI on phaser during testing. Change-Id: Ia721c01aab5848ff36e11792adf9c494aa25c01d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/27945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-08soc/intel/apollolake: add new dimm info saving APIAaron Durbin
The current call for saving dimm info passed the lpddr4_cfg and memory sku id. In order to prepare decoupling the part number from lpddr4_cfg provide a new API, save_lpddr4_dimm_info_part_num(), which explicitly takes the part number. The previous API now uses the new one internally. BUG=b:112203105 Change-Id: Ieadf452b6daa3231a0c5e3be61b0603b40d0fff2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/27944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-08soc/intel/apollolake: Add support for LPDDR4 nWR settingRavi Sarawadi
nWR (Write-Recovery for AutoPre-charge commands), the programmed value of nWR is the number of clock cycles the LPDDR4-SDRAM device uses to determine the starting point of an internal Pre-charge operation after a Write burst with AP (auto-pre-charge) enabled. For >2133MHz speed parts the nWR needs to be set to 24 clock cycles. The nWR field, though, is only in the GLK FSP, so just update that field conditionally based on the GLK Kconfig option. BUG=b:112062440 TEST= build test Change-Id: I1147538f72f4e2f14e32f3657c05f1f505a56fbf Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/27850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-08soc/amd/stoneyridge/acpi.c: Remove fixed value variablesRichard Spiegel
In procedure generate_cpu_entries(), the code was copied from code that could change variables "plen" and "pcontrol_blk" based on number of cores. This is not the case with stoneyridge (2 cores only), and there's no need to use the variables. Remove them and replace with fixed values. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: I0258b19960b050e8da9d218ded3f1f3bfccad163 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27877 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-08device/pci_device.c: Remove unused variable attr settingRichard Spiegel
In procedure pci_get_resource, when setting an IO mapped base address, variable attr is &= with PCI_BASE_ADDRESS_IO_ATTR_MASK. However, in this particular code flow variable attr is not used later. Remove the line. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: Ia4fdda1be92d22017a7a913a911db15aaa440b69 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-08lib/bootmem.c: Remove unused setting of variable "begin"Richard Spiegel
The variable "begin" is extracted from the structure, but 4 lines below it's overwritten with "end - size". This causes a static build scan error that should be fixed. Remove the initial assignment of variable "begin". BUG=b:112253891 TEST=Build and boot grunt. Change-Id: I0a265747e61289f045c5cac09e40478bd31e16fc Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27886 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-08mb/intel/cannonlake_rvp/devicetree: Remove spurious CPP directivesArthur Heymans
The devicetree is not run through a C pre-processor, so remove it. Change-Id: I161be45b2035f3a8724bf3217260e7571c429da8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27927 Reviewed-by: Naresh Solanki <naresh.solanki.2011@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-08src/soc/intel/common: Configure the gspi chip select state correctlyAamir Bohra
This implementation updates the chip select control register programming in gspi controller setup call to program the correct bit fields for chip select state. Change-Id: Ifab37b0003f09a680024d5b155ab0bb157920a53 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/27889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-07arch: Retire cache_sync_instructions() from <arch/cache.h> (except arm)Julius Werner
cache_sync_instructions() has been superseded by arch_program_segment_loaded() and friends for a while. There are no uses in common code anymore, so let's remove it from <arch/cache.h> for all architectures. arm64 still has an implementation and one reference, but they are not really needed since arch_program_segment_loaded() does the same thing already. Remove them. Leave it in arm(32) since there are several references (including in SoC code) that I don't feel like tracking down and testing right now. Change-Id: I6b776ad49782d981d6f1ef0a0e013812cf408524 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-07arm64: Disable MMU during legacy payload handoff (without Arm TF)Julius Werner
coreboot payloads expect to be entered with MMU disabled on arm64. The usual path via Arm TF already does this, so let's align the legacy path (without Secure Monitor) to do the same. Change-Id: I18717e00c905123d53b27a81185b534ba819c7b3 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-07sdm845: Implement bitbang UART for bootblockJulius Werner
This patch replaces the UART in the bootblock of SDM845 with a bitbang implementation. Since SDM845 hardware UART needs a firmware blob loaded into it before it becomes usable, it is not really suited for use in the bootblock (since by the time we can read blobs from SPI, the bootblock is essentially over anyway). This solution allows us to still have some console output during early SoC initialization. Change-Id: I0c252ec83a7993edce5c4debc687f1fdd0d7b36d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/25813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-07security/tpm: Check for NULL pointerFurquan Shaikh
Change bce49c2 (security/tpm: Improve TCPA log generation) missed checking for NULL pointer before accessing the tcpa_table returned by tcpa_log_init. This change fixes the boot hang observed on octopus by ensuring pointer is checked for NULL before using it. BUG=b:111403731 TEST=Verified that octopus boots up fine. Change-Id: I2e46197065f8db1dc028a85551546263e60d46b2 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-07sb/intel/i82801[ijg]x: remove stale board-specific comments from ich*.aslStefan Tauner
Apparently they were introduced when refining ICH7 support when porting Kontron 986LCD-M and then copied over to ICH9 and 10. Change-Id: I2d9ece608955310d22b79574b9113a1521b2076c Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/27855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-07mb/google/poppy/variants/nautilus: Set CABC_EN to GPO high before EDP power onSeunghwan Kim
If GPP_E22(CABC_EN) remained floating GPI(SoC default) at V3.3_DX_EDP on, it may cause damage on the GPIO pad. To prevent, we would set this pad to GPO on romstage before EDP power on. Since we need to cover all systems in market, I put it into romstage instead of early_gpio_table. BUG=b:111860510 BRANCH=poppy TEST=Verified CABC_EN is set to GPO high 5ms before EDP power on Change-Id: I34e2fe86329a88eb05e0ea3c6beac6a64754b41e Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-07mb/google/poppy: Add variant callback for romstage GPIO configurationFurquan Shaikh
This change adds variant callback to get GPIO configuration table in romstage and configures these GPIOs before memory training is performed. BUG=b:111860510 BRANCH=poppy Change-Id: I1eb51356fb3f4c0f4ff29b22dbcde6dbece303ad Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-07mb/google/poppy/variants/nautilus: Add SKU info to SMBIOSFurquan Shaikh
This change provides implementation of smbios_mainboard_sku() to add proper "skuX" string to SMBIOS table 1. BUG=b:112163362 TEST=Verified "dmidecode -t 1" reports skuX correctly. Change-Id: I7e42d2c80d791ea7170d066d2eeaa0c6811eb9c9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-06soc/amd/stoneyridge: Call AMD ALIB method with AC/DC stateMarc Jones
AMD ALIB Function 1 accepts the AC/DC startup state. This is reported to be required for AMD PSPP settings. BUG=b:112020107 TEST= build test Change-Id: Ibb6c872d84745217912956c15d6ca2e8ba387561 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27785 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-06mainboard/google/kahlee: Add PSPP override settingMarc Jones
Add default PSPP AGESA setting for Kahlee/Grunt mainboards. BUG=b:112020107 TEST= build test Change-Id: I8a8605402379de88a04f3a16553c308513fa1531 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-06google/grunt: Move PSP_SELECTABLE_SMU_FW to socRichard Spiegel
Now that an updated bootloader with important fixes is available at coreboot repository, all stoneyridge boards should use it. Move the selection of SOC_AMD_PSP_SELECTABLE_SMU_FW from mb/google/kahlee to soc/amd/stoneyridge. BUG=b:111428800 TEST=Build and boot grunt. Change-Id: Idf8e348efbc85569aa1163125f412c5242c46eb4 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27844 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-06src/soc/intel: Add AML IGD in platform reportingGaggery Tsai
This patch revises IGD naming and adds AML IGD in platform reporting. BUG=None BRANCH=None TEST=emerge-atlas coreboot chromeos-bootimage & Ensure AML IGD is shown in platform reporting. Change-Id: Id8f8379703abdaa5b14a4337a4fca04b370f3a2a Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/27846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06soc/intel/skl: Add AML IccMax and remove unused infoGaggery Tsai
This patch adds AML IccMax for VR configuration. From doc #594883, the IccMax for Core was changed to 28A, we need this patch to accommodate the changes. Besides, removes unused sku information from sku_icc_max_mapping structure. BUG=b:110890675 BRANCH=None TEST=Remove icc_max from DT & emerge-atlas coreboot chromeos-bootimage & Tested with AML-Y and KBL-Y SKUs. Change-Id: Ic22bae162b58b06b9519f1b708be55bde5e4641e Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/27610 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-06mb/google/octopus/variants/baseboard: Update Power Limit1Sumeet Pawnikar
Update power limit1 value from 8W to 10W. There is an error in the energy calculation for current VR solution on GLK. Experiments show that when power limit1 set to 10W, gained performance improvement with SoC TDP reaches max (6W) power. BUG=b:79779737 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: Ic320d442e7401e4be2e8e16d691db4c803f0fdc1 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/27819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06soc/amd/stoneyridge: Enable spread spectrum in bootblockRaul E Rangel
setup_spread_spectrum is called in early_init, meaning the console is not initialized yet. So you won't see boot block booting twice. BUG=b:111610455 TEST=booted grunt and verified that AmdInitReset does not reboot. I had AGESA patched to skip the JTAG check. Change-Id: Ia036ea513ac67d4b8bcf5a78029d969a4ae012a6 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-06vendorcode/intel/fsp/fsp2_0/glk: Add nWR config in Odt ConfigKane Chen
From doc 571118, the bit 5 of OdtConfig is nWR config. If the bit 5 is set, MRC will set MR1 nWR field to 24. If the bit 5 is clear, MRC will set MR1 nWR field to 6. Change-Id: Ic8e4e2ffb098c8ba2f670535981e9a30c3d45b64 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/27814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-06mb/google/octopus/variants/fleex: Enable Weida touchscreen deviceCrystal Lin
This change adds ACPI properties for WDT8752A device. BUG=b:111402335, b:111102092 BRANCH=master TEST=Verify touchscreen on fleex works with this change Change-Id: Id186d5b87343007ae7e631d5d27464ee27e5b27d Signed-off-by: Crystal Lin <crystal_lin@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add rammus devicetree.cbZhuohao Lee
Use the default value for Iccmax which is specified in vr_config.c. The AcLoadline and DcLoadline keep the poppy value. Besides, the USB 2.0 ports located on the mainboard are set to USB2_PORT_SHORT and the others on the daughterboard are set to USB2_PORT_LONG. Those setting need to be fine tuned later. BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: Icabfac04c94b3d480872c243d811509e274ef122 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add gpio settingZhuohao Lee
The gpio setting is based on the proto board schematics BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: I20fc081d372b8686f6128a7e85276f9c6798b199 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add memory configurationZhuohao Lee
Add memory configuration based on the proto board schematics BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: I45efdc7893b5bcbca0de6e932e1452cc1a2ff028 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add audio, mic and codec configurationZhuohao Lee
Rammus uses DA7219 Headset, Maxim MAX98927 Smart Amps and 4 channel dmic BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: If21a3870ee4b000a776d2f3e025fb43ef2fe48c7 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: change build directory to rammusZhuohao Lee
Move the build board directory from poppy to rammus. BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: I3a9fc2bbfe7261661f0c5c073baff0ff1434d09f Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mp_init: fix typoRaul E Rangel
BUG=none TEST=none Change-Id: Ic2d7bf5f5335894ede98dc7e6cc6a65e4897e487 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-06mb/google/kahlee: Disable SATA in all boardsRichard Spiegel
Kahlee based boards don't use SATA, so disable SATA on all boards to save power. BUG=b:112139043 TEST=Build and boot grunt, checked the absence of SATA PCI. Change-Id: I6a12c03a5a95b1c8b40609a3fe656df92548b80b Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-06soc/amd/stoneyridge: Disable SATA based on devicetree settingRichard Spiegel
Grunt boards don't use SATA, so it should be disabled to save power. Check if SATA is enabled in devicetree, and enable/disable the device based on that setting. BUG=b:112139043 TEST=Buil and boot grunt, checked the absence of SATA PCI. Change-Id: I4a3b5f65e612e8da5bedff0c557a0850f350dfa8 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-05southbridge/intel/bd82x6x/Kconfig: Do not include any IFD by defaultAngel Pons
Since only a handful of boards have descriptor blobs in the tree, it makes no sense to have `HAVE_IFD_BIN` enabled by default then disabled on each mainboard. This patch flips the default value of said variable, rendering all current overrides unnecessary. The few boards which have an IFD in the blobs repo use `select HAVE_IFD_BIN` to enable adding the IFD by default. Since `HAVE_ME_BIN` depends on `HAVE_IFD_BIN`, the former has been removed alongside the latter, and has been added to the boards with a ME blob as `select HAVE_ME_BIN`. Both `HAVE_IFD_BIN` and `HAVE_ME_BIN` have been removed from autoport as well. Change-Id: I330c4886f8bea4b1a8ecad6505a0e5cc381654d1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/27218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-04x4x/raminit_ddr23: use MCHBAR AND/OR/AND_OR macros [2/2]Felix Held
This patch contains the parts that changed the hash of the generated binary; probably due to the compiler optimizing things slightly different. Change-Id: I3233ba1747dcf5ad05b2ad771a86e3936f655d1c Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-04nehalem/raminit: remove read_mchbar functionsFelix Held
Change-Id: I7935cc166aa39f4053f45eef925d92ce50fd98ba Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-04nehalem/raminit: clean up code and remove write_mchbar functionsFelix Held
This part of the cleanup patches changes the hash of the output binary; likely due to the compiler optimizing things differently. Change-Id: I1a22f6216a75e2b463d4e169e97ad6e0bbaafae8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27708 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-04northbridge/nehalem: add MCHBAR8/16 AND_OR macrosFelix Held
Change-Id: I62e4a8610689e72944e1a9c020f13a47d402c136 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-04nehalem/raminit: clean up code and use MCHBAR macrosFelix Held
On a a timeless build with coreboot i386 crossgcc 6.3.0, this doesn't change the hash of the output binary. Change-Id: I15e09320e72cffb8a2617eca0cfe40780f74bece Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27707 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-04nehalem/raminit: remove REAL define and most dead codeFelix Held
The code only compiled when REAL was set to 1; the other case included an unpublished include. Change-Id: I7f31e9cd02f45492d6c9e88ec6164a537ca5e3c2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27706 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-04mb/pcengines/apu2: turn LED 2 and LED 3 off in final stageMichał Żygowski
Due to vendor's requirements LED 2 and LED 3 should be turned off in late boot process. Add appropriate functions to read and write GPIO status. Change-Id: Ia286ef7d02cfcefacf0e8d358847406efe1496fb Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/27729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-04mb/pcengines/apu2: change GPIO settingMichał Żygowski
Change GPIO setting to use IOMUX to refer to GPIO by IOMUX register as in BKDG for Family 16h Models 30h-3fh Processor Rev 3.06. Change-Id: Icf4a60acabe65cd7f9985bb3af8bd577764d4196 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/27665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-04drvs/intel/gma/acpi: Add methods to use MBOX3Patrick Rudolph
* Add Mailbox 3 driver * Request brightness change through Mailbox 3 * Return Ones on error or if unsupported * Mark existing code as legacy (still required if no GMA driver is running) * Call legacy code if Mailbox 3 is unsupported, on error or if gma driver isn't running Tested on Lenovo T430: * Brightness control still works * Brightness is the same on S3 resume Change-Id: I51554c819148336b204d28972cbf775a10c3fb8a Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/27711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nathaniel Roach <nroach44@gmail.com> Reviewed-by: Nicola Corna <nicola@corna.info> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-03security/tpm: Improve TCPA log generationPhilipp Deppenwiese
* Make tcpa_log_init static and move init code into the tcpa_log_add_table_entry routine. * Add more checks for log initialization. * Fix minor issues Change-Id: I215d79eed7ad17c6ab87f0c4b14a282e519ef07d Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/27769 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-03gpio: Change gpio_baseX_value() function return types to unsignedJulius Werner
This patch changes the return type of gpio_base2_value() and related functions from int to uint32_t. This makes more sense now that board_id() and related functions (which are the primary use case) also return that type. It's unlikely that we'll ever read a strapping of 32 GPIOs in a row, but if we did, we'd probably want to treat it as unsigned. Change-Id: I8fb7e3a7c76cb886aed40d0ada1f545180e43117 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03southbridge/intel: Remove leftover TPM ACPI codePhilipp Deppenwiese
Remove ACPI code which isn't necessary anymore due to the LPC TPM ACPI generator. Change-Id: I2fae286d61ec7c1036d1a8fa800dc8d9603252e9 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/27767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03soc/amd/common: Remove PSPP override settingMarc Jones
For some reason the PSPP setting was being overwritten in the common code. Remove the setting and allow the oem customize function to make the setting. BUG=b:112020107 TEST= build test Change-Id: If7f4511a71f725fedd60d33552656850e50d955d Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-03mainboard: Add ASUS P8H61-M LXTristan Corrick
Tested with GRUB 2.02 as a payload, booting Debian GNU/Linux 9.5 with kernel 4.9. This code is based on the output of autoport. The file `data.vbt` matches the VBT in the latest version of the vendor firmware (version 4601). This board works well under coreboot. A list of what works and what doesn't can be found in the documentation part of this commit. To summarise: the only known issues are that S3 suspend/resume doesn't work, and that there is no automatic fan control via the super I/O. Change-Id: I2a0579f486d3a44de2dd927fa1e76b90c3b48f62 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03superio/nuvoton/nct6776/acpi: Add PS/2 mouse supportTristan Corrick
By defining SUPERIO_KBC_PS2M, ACPI code is added to show the PS/2 mouse. This has been tested on an ASUS P8H61-M LX with Linux 4.9.110 and 4.17.8. In each case, the PS/2 mouse works automatically, whereas it was not detected before. Change-Id: I7983f85b3fd23547950f1f75a81bbca63c63d52b Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03superio/acpi: Make _CRS methods Serialized, eliminating IASL remarksTristan Corrick
When compiling for the ASUS P8H61-M LX, IASL 20180531 emits the following remark: "Control Method should be made Serialized (due to creation of named objects within)". Making the appropriate methods Serialized eliminates these remarks. Change-Id: I8e95d9a00a629a2f904c79b78fac20810327ed37 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27796 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-03superio/nuvoton/nct6776/acpi: Add parallel port supportTristan Corrick
Exposing the parallel port via ACPI causes Linux to automatically detect the parallel port and load the appropriate modules. Tested on an ASUS P8H61-M LX with Linux 4.9.110 and 4.17.8. However, no parallel port device has been tested. Change-Id: I2529a074e24433d093ad0650a45c7b29238620f3 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03sandybridge/raminit_mrc: remove reference to report_platform_info()Matt DeVillier
Commit ef8c559e537ed10d8054ca6a72ca50e0531fde95 [nb/intel/sandybridge/report_platform: Move remaining code to sb folder] moved reporting code to the southbridge, but missed a reference in the non-default MRC raminit path (so testing missed it). Remove invalid reference to fix compilation error. Test: build google/link with MRC raminit option selected Change-Id: I270a95ac53fbc9f8792f375908cf91585261f6a1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-03superio/nuvoton/nct6776/acpi: Fix typo in commentsTristan Corrick
The constant used in the ACPI code is NCT6776_SHOW_KBC, so update the comments to reflect that. Change-Id: I9ba69384866088f84a516557d76864104a024968 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03cpu/x86/lapic/apic_timer.c: Compile the same code for all stagesArthur Heymans
timer_monotonic_get() was only compiled in a !__PRE_RAM__ environment. Clean up the code paths by employing CAR_GLOBAL for the global state which allows the same code to be used in all stages. Change-Id: I08fd1795508f76abdab1618585366bf9d06482ff Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27801 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-03mb/google/auron,cyan: Remove interrupt from devicetree LPC TPM chip driverMatt DeVillier
These boards require polling vs interrupts, so remove the IRQ definition to prevent it being added to the SSDT device entry. Test: Boot Linux on various auron and cyan variants, verify no error for 'TPM interrupt not working' present in kernel boot log. Change-Id: Ia1139389f075934d41e823ce5190011c90c7cc88 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-03soc/intel/cannonlake: Report Whiskey Lake infoLijian Zhao
According to #574725, report Whiskey Lake CPUID, MCH device ID and graphics device ID in bootblock stage. BUG=N/A TEST=Build and boot up whiskey lake rvp platform and check serial log to see proper CPU/MCH/GFX/PCH got recognized. Change-Id: I3fbc190e0520989d2fd4a9b3294e84d67e49b2cf Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/27756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>