| Age | Commit message (Collapse) | Author |
|---|
|
New board 'cozmo'.
BUG=b:181144502
TEST=None
BRANCH=kukui
Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com>
Change-Id: Ia0ec1d89444d2634bfcfb3475a422f4e4ae92b7f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chen-Tsung Hsieh <chentsung@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Enable gpio mode driver for ALC1015 AMP Auto Mode.
BUG=b:176956779
BRANCH=dedede
TEST=ALC1015Q-VB drive speaker OK
Change-Id: Iaa5650e120362e81fa36530f6a207c9c07e1139a
Signed-off-by: wuweimin <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
IPMI OEM command set processor information has already been implemented
in u-root payload:
https://github.com/u-root/u-root/commit/efdc3a30ecca53e8b50b863969173969127fa384
Also this command has a higher chance to see BMC KCS timeout issue when
coreboot log level is 4, which can be avoided if this command is run at
a later stage such as LinuxBoot.
Signed-off-by: JingleHsuWiwynn <jingle_hsu@wiwynn.com>
Change-Id: If0081e5195cbd605e062723c197ac74343f79a13
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51276
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch sets up cse_fw_sync() call in the romstage. The cse_fw_sync()
must be called after DRAM initialization.
Test=Verified on Alderlake platform
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I6779f4a9e140deebf7f3cecd9fc5dac18813f246
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
DPTF paramerters from thermal team.
1. PL2 =15W
2. Add TSR sensor charger, 5V regulator
BUG=b:177249297
BRANCH=dedede
TEST=build image and verified by thermal team.
Change-Id: Ia5f6cc2a4564bb5558cbaca8daf31ee70145019f
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51428
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This patch sets the HDMI audio mode to 8T as required by the latest FSP
version v2081_02
TEST: HDMI audio codecs detection is failing without this change.
Change-Id: Ie5a825da7d199c9ee61e64d8f4ee7dec28fdaacd
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
This patch disables the xDCI which is causing PC8 to PC10 state
transitions during sleep.
TEST: Confirmed that the transition is happening with this change.
Change-Id: I9bbf7b52c36954600d7e66f9b03fad39b8881a5f
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
|
|
Currently, if `get_wifi_sar_cbfs_filename()` returns NULL, then
`get_wifi_sar_limits()` assumes that the default filename is used for
CBFS SAR file. This prevents a board from supporting different models
using the same firmware -- some which require SAR support and some
which don't.
This change updates the logic in `get_wifi_sar_limits()` to return
early if filename is not provided by the mainboard. In order to
maintain the same logic as before, current mainboards are updated to
return WIFI_SAR_CBFS_DEFAULT_FILENAME instead of NULL in default
case.
Change-Id: I68b5bdd213767a3cd81fe41ace66540acd68e26a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51485
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that SAR support in VPD is deprecated in coreboot, there is no
need for a separate Kconfig `WIFI_SAR_CBFS` as the SAR table is only
supported as a CBFS file. This change drops the config `WIFI_SAR_CBFS`
from drivers/wifi/generic/Kconfig and its selection in
mb/google/.../Kconfig.
wifi_sar_defaults.hex is added to CBFS only if
CONFIG_WIFI_SAR_CBFS_FILEPATH is not empty because current mainboards
do not provide a default SAR file in
coreboot. Thus, CONFIG_WIFI_SAR_CBFS_FILEPATH is updated to have a
default value of "".
BUG=b:173465272
Cq-Depend: chromium:2757781
Change-Id: I0bb8f6e2511596e4503fe4d8c34439228ceaa3c7
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
SAR table in VPD has been deprecated for Chrome OS platforms for > 1
year now. All new Chrome OS platforms have switched to using SAR
tables from CBFS.
This change drops the support for SAR table in VPD from coreboot to
align with the factory changes. `get_wifi_sar_limits()` is thus
updated to look for SAR file in CBFS only.
Anyone building ToT coreboot for an already released Chrome OS
platform with SAR table in VPD will have to extract the "wifi_sar" key
from VPD and add it as a file to CBFS using following steps:
- On DUT, read SAR value using `vpd -i RO_VPD -g wifi_sar`
- In coreboot repo, generate CBFS SAR file using:
`echo ${SAR_STRING} > site-local/${BOARD}-sar.hex`
- Add to site-local/Kconfig:
```
config WIFI_SAR_CBFS_FILEPATH
string
default "site-local/${BOARD}-sar.hex"
```
BUG=b:173465272
Change-Id: I21d190dcc9f3554fab6e21b4498e7588a32bb1f0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Correct the wrong offset for setting PCIe domain.
Change-Id: I9de2bdf5a0a4fb5b34985b11976fd50b397e97ba
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51512
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch rewrites the last few users of prog_locate() to access CBFS
APIs directly and removes the call. This eliminates the double-meaning
of prog_rdev() (referring to both the boot medium where the program is
stored before loading, and the memory area where it is loaded after) and
makes sure that programs are always located and loaded in a single
operation. This makes CBFS verification easier to implement and secure
because it avoids leaking a raw rdev of unverified data outside the CBFS
core code.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I7a5525f66e1d5f3a632e8f6f0ed9e116e3cebfcf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49337
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch removes the prog_locate() call for all instances of loading
payload formats (SELF and FIT), as the previous patch did for stages.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I582b37f36fe6f9f26975490a823e85b130ba49a2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49336
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes the prog_locate() step for stages and rmodules.
Instead, the stage and rmodule loading functions will now perform the
locate step directly together with the actual loading. The long-term
goal of this is to eliminate prog_locate() (and the rdev member in
struct prog that it fills) completely in order to make CBFS verification
code safer and its security guarantees easier to follow. prog_locate()
is the main remaining use case where a raw rdev of CBFS file data
"leaks" out of cbfs.c into other code, and that other code needs to
manually make sure that the contents of the rdev get verified during
loading. By eliminating this step and moving all code that directly
deals with file data into cbfs.c, we can concentrate the code that needs
to worry about file data hashing (and needs access to cbfs_private.h
APIs) into one file, making it easier to keep track of and reason about.
This patch is the first step of this move, later patches will do the
same for SELFs and other program types.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ia600e55f77c2549a00e2606f09befc1f92594a3a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49335
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If we spot any error in the file, treat it as untested and
broken copy-paste.
Change-Id: Idd13b8b006fce7383f3f73c3c0a5d51a71c0155b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38313
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
IRQ programming should be done outside (obsolete) MP table
generation.
Change-Id: Ibce2af4de91549c4c9743cd997f625164672a713
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38564
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add USB Port into devicetree for storo
BUG=b:177389444
BRANCH=dedede
TEST=built firmware and verified USB3.0 function is OK
Change-Id: I4d5160ff23d2bd386cb33164b580e6d6f3bf30fd
Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Originally, log macro names are too long, and they use
double parentheses style: ((...)), which causes compile
or runtime error easily.
Now, change them to single parenthesis mode (...), and
use shorter name.
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: I2959dc1ba0dd40a8fb954406072f31cf14c26667
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The i2c actiming with the default reg setting cannot meet spec,
so we need to set some regs.
1. adjust the ratio of SCL high and low level, to adjust "tLOW".
2. modify ext_conf reg to adjust "tSU,STO".
BUG=b:179000159
TEST=Test on asurada (MT8192), boot pass,
timing pass.
Signed-off-by: Daolong Zhu <jg_daolongzhu@mediatek.corp-partner.google.com>
Change-Id: Ifbe97edbc38972af5b782fb93342ee0616127dd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51024
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add camera support in devicetree and associated GPIO configuration.
BUG=b:181729304
BRANCH=dedede
TEST=built blipper firmware and verified camera function is OK
Change-Id: I806ec207a454d4383aca093159553b7e618e16b2
Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add audio codec and speaker amplifier support into devicetree
BUG=b:181732574
BRANCH=dedede
TEST=built blipper firmware and verified audio function is OK
Change-Id: Id4633649b5e0595ed99a40ae35eb54b005154604
Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add G2 and ELAN touchscreen into devicetree for blipper.
BUG=b:181098785
BRANCH=dedede
TEST=built blipper firmware and verified touchscreen function is ok
Change-Id: Ie0bfc2972fc1a33a6f02495d3976b816209e956b
Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Configuring GPP_B7 as GPO_HIGH.
Sasuke doesn't have SAR sensor, GPP_B7 is routed to the LTE module
and is kept high so that the LTE module uses the default emission power.
BUG=b:180492044
BRANCH=firmware-dedede-13606.B
TEST="FW_NAME=sasuke emerge-dedede coreboot"
Change-Id: Ib38c649830db2291b3a2a771f5c884acf37dcbeb
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51049
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In RX Gating flow, PI P1 delay is missing, so re-add the initialization.
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: Ic72ccecd205062ee79f6928993fac772fc10f880
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51425
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
For bootup faster, fast-k elapsed time is improved by ~400ms.
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: Ifa945012aa66df4433fe63aab75a1e785d343d9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51406
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SKU IDs also need mapping table when reading voltages.
BUG=None
BRANCH=asurada
TEST=emerge-asurada coreboot
Change-Id: Ice91961d6c33cfa27254221663edca1547c9ddcc
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
BUG=b:181972598
TEST=builds
Signed-off-by: Mathew King <mathewk@chromium.org>
Change-Id: I1abb070324254e21b03bfe00d6eee3b70120564c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Guybrush does not have a dedicated SCI pin so it uses VW.
BUG=b:181134664
TEST=builds
Signed-off-by: Mathew King <mathewk@chromium.org>
Change-Id: I12fb7c23718ad2350478b89b321e9f0aa099e53b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51238
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some of the temperature sensors defined in baseboard do not exist in
magolor. With the format the DPTF policies are defined in magolor, all
the entries from the baseboard are included and then the overrides
applied. This causes the non-existent DPTF devices to be exported in
the ACPI table and in turn OS reading invalid temperatures. Fix the
format for DPTF passive and critical policies.
BUG=None
BRANCH=dedede
TEST=Build and boot to OS in magolor. Ensure that the DPTF entries look
correct in both static.c and SSDT tables i.e. passive and critical
policies for applicable devices only are present.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I43f0b188e49e24657db055ce898ce159d499a22e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Some of the temperature sensors defined in baseboard do not exist in
madoo. With the format the DPTF policies are defined in madoo, all the
entries from the baseboard are included and then the overrides applied.
This causes the non-existent DPTF devices to be exported in the ACPI
table and in turn OS reading invalid temperatures. Fix the format for
DPTF passive and critical policies.
BUG=b:182513022
BRANCH=dedede
TEST=Build and boot to OS in madoo. Ensure that the DPTF entries look
correct in both static.c and SSDT tables i.e. passive and critical
policies for applicable devices only are present.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Idc5d0b357d61b9346b4d20ec8322b124c9655b4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Ben Kao <ben.kao@intel.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
The X11SSH-LN4F and X11SSH-F are very similiar. They both use the same
PCB and use the same Supermicro BIOS ID. The X11SSH-LN4F has 4 NICs in
difference to the X11SSH-F which only has 2 NICs. The two additional
NICs aren't populated on the X11SSH-F. Enable the PCIe root ports
connected to the two additional Intel NICs.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Change-Id: Id4e66be47ceef75905ba760b8d5a14284e130f63
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Already selected by SoC.
Change-Id: I1d941881f50350b6b581416a2e722ea2e7485a1c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This change adds fine-tuned USB2 PHY parameters for sasukette.
BUG=180753635
TEST=Built and verified USB2 eye diagram test result
Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com>
Change-Id: I5612e7dcca15b340763dee1475e979ee551a2146
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Drop the 100ms delay in the _PS0 method because kernel already adds this
100ms. This change also drops polling TBT PCIe root ports Link Active
State because this scheme is not applicable for SW CM.
BUG=None
TEST=Built Alderlake coreboot image successfully.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I792d3c8ca4249ed74d4090ec1efba5a180429c75
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51191
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
wrong date code MB
Disable SA GV, because factory used Samsung memory with wrong date code.
So we need to use board version to identify build MB phase to disable SA GV.
Disable SA GV when board version equal one.
BUG=b:179747696
BRANCH=firmware-volteer-13672.B
TEST=Built and booted into OS.
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I51f4adcf0dd8dbf1cf39d8aec6e4303565551e5f
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Id534e1b73e73bbb9d944c988d1ef66bc1f463eff
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50867
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Deomid "rojer" Ryabkov <rojer9@fb.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the PCIe RTD3 driver for WWAN device attached to PCIe Root
Port 4 and provide the reset GPIO / src clk pin.
BUG=none
TEST=Boot to OS, verify the link is in L2 state during S0ix.
Change-Id: I669e02bd02e3af878648a6f3cf4fbb4d06c9857f
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51315
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Add LTE module support into devicetree and associated GPIO configuartion.
BUG=b:177955524
BRANCH=dedede
TEST=LTE function is OK
Change-Id: I9aff9608e08eae00ab5ac8547f63bc83b62fea78
Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add P-sensor into devicetree for storo according to
configuration information provided by the vendor.
BUG=b:177392203
BRANCH=dedede
TEST=built storo firmware and verified P-sensor function
Change-Id: Iced4ab7d94b38ef8b1807955cbb887454accb1e8
Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
|
|
Add audio codec and speaker amplifier support into devicetree
BUG=b:179057895
BRANCH=dedede
TEST=audio function is OK
Change-Id: Ia864ac47223adb80463966209f6ff3640b715378
Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51003
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To support mipi camera.
1. enable DRIVERS_INTEL_MIPI_CAMERA/SOC_INTEL_COMMON_BLOCK_IPU
2. add IPU/VCM/NVM/CAM1 into devicetree
To support usb camera.
add camera support in devicetree and associated GPIO configuration.
BUG=b:177393430, b:177388006
TEST=Build and boot to OS. Camera function is OK.
Change-Id: I98d5708d1955406c2e46db972903057bb3d12dcc
Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50995
Reviewed-by: Andy Yeh <andy.yeh@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update T440p's VBT from version 1215 to version 2179. Extracted
using VBiosFinder (https://github.com/coderobe/VBiosFinder)
from the latest bios update file:
https://download.lenovo.com/pccbbs/mobiles/gluj42us.iso
The new version solves the problem that DP output was broken
under Windows.
Test: boot t440p with both SeaBIOS and Tianocore payloads,
verify dp output and backlight control all works under both
Linux and Windows.
Signed-off-by: Da Lao <dalao@tutanota.com>
Change-Id: If8669b8de6fa0801e261138651b8b2cf50432a70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40723
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jamal Wright <Crabstorage@getbackinthe.kitchen>
|
|
In both the Kconfig and Makefile in this directory,
"STM_TTYS0_BASE" is used. Therefore, fix the typo.
Change-Id: Ie83ec31c7bb0f6805c0225ee7405e137a666a5d3
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51206
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eugene Myers <cedarhouse1@comcast.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is no PCI host interface for this version of CNVi BT.
CNVi BT on Tigerlake is an USB device.
Change-Id: Ib71a827c36dfac55c3e5ce586b00a26fc6264464
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50900
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove the CNVi BT PCI config and add BT flag. There is no PCI host interface
in this version of CNVi.
TEST: BT is checked using 'lsusb -d 8087:0026' from OS to make sure BT is
enumerated.
Change-Id: I8de5615235f24e6169bf67dbbadb92e69437bc4e
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50899
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
flag
Remove the CNVi BT PCI config and add BT flag. There is no PCI host interface
in this version of CNVi.
TEST: BT is checked using 'lsusb -d 8087:0026' from OS to make sure BT is
enumerated.
Change-Id: Ic700021d7a09be63ffc2715f31992257e2e893af
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50898
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
update the DPTF parameters received from the thermal team.
BUG=b:181627614
TEST=emerge-ambassador coreboot
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: Ied6b71d9285662a70446af2e781b630e184c3b19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joe Tessler <jrt@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
There is no PCI host interface for Cnvi BT in Alderlake.
CNVi BT on Alderlake is an USB device.
Change-Id: I3e08c6d6f00e81267dc28c9b37b2dfff5cd75db1
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51352
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove the CNVi BT PCI config and add Bt flag.
There is no PCI host interface in this version of CNVi.
TEST: BT is checked using 'lsusb -d 8087:0026' from OS.
Change-Id: I7e8ca1bb6a57721a72478137612d7a9c391ca0b2
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Remove the CNVi Bt PCI config and add Bt flag.
There is no PCI host interface in this version of CNVi.
TEST: BT is checked using 'lsusb -d 8087:0026' from OS.
Change-Id: I17c3e2761f91fb397d140d1954b6d4b451c4c603
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This change adds the corresponding CNVi BT Core enabling flag.
TEST: BT is checked using 'lsusb -d 8087:0026' from OS.
Change-Id: Iecc10c8946a450350adb34b984cf48ad988097ca
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51350
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
FSP has added the Cnvi BT Core enabling in addition to the existing
CnviMode. This change adds the flag at the soc config side (i.e.
soc_intel_tigerlake_config for devicetree). Also, there is no longer PCI host
interface for BT. Therefore, BT core should not use the pci port status to turn
on/off.
TEST: BT enumeration is checked using 'lsusb -d 8087:0026' from OS to make
sure BT is turned on.
Change-Id: I71c512fe884060e23ee26e7334c575c4c517b78d
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
making the symbols common accross targets to avoid duplicates for each soc.
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Change-Id: Ic60f46891dfadc7db5ece02756cb449aacdd63c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51337
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
From ALSA reviewer suggest to change the name to RTL1015.
Details in below threads:
https://www.spinics.net/lists/alsa-devel/msg123395.html
BUG=b:177971830
TEST=: ALC1015P driver can probe properly.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I2762852bdc3164346e3618c373aa4d3336415653
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Missing acpi_dp_write and correct the name from sdb to sdb-gpios for
driver.
BUG=b:177971830
TEST: ALC1015P driver can get sdb-gpio properly.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I2728a7dad695d5c97e85c5d86b1effea1595da65
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51379
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use VPD of "coreboot_uart_io" to select uart io if
OVERRIDE_UART_FOR_CONSOLE is selected.
Tested=On OCP Delta Lake, console messages correctly output to uart
port which is defined in VPD.
Signed-off-by: Bryant Ou <Bryant.Ou.Q@gmail.com>
Change-Id: I55a85d6f137ef1aba95466e7b094740b685bf9bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
Create the collis variant of the volteer reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:182227204
BRANCH=None
TEST=util/abuild/abuild -p none -t google/volteer -x -a
make sure the build includes GOOGLE_COLLIS
Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Ibcf8b59b38d02517cea0a3ee474ff82fc0a2a958
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
Add support to pick the right vbt from cbfs according to
SKU-ID.
Change-Id: I8795cc67d87429eddb31328f1e2a90c346b53533
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Override SMBIOS type 2 board feature flags. For Delta Lake, board is
replaceable and is a hosting board.
Tested=Execute "dmidecode -t 2" to check info is correct.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I4469360ec51369dbf8179b3cbac0519ead7f0382
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
Follow 20210308 schematic.
BUG=b:182211161
TEST=builds
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ib259f3defc606c373f5ccac5f022d93e9a5c1469
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
Follow 20210308 schematic.
BUG=b:182211161
TEST=builds
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I1720ea8fec004d3ed3b3faaffa3b37dfcd710241
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51372
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
This patch overrides the get_wifi_sar_cbfs_filename()
to return different sar table according to the sku id.
BUG=b:173465272
TEST=checked bios log and the correct sar table was loaded.
Change-Id: Ia30d760b1a029197d470818c73bfd2c00514652d
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Use gpio_keys driver to add ACPI node for pen eject event.
Also setting gpio wake pin for wake events.
BUG=b:175519097
BRANCH=firmware-volteer-13672.B
TEST=build and verify on a Copano
Change-Id: Id0a132aa398abde4983af123d00e355ac61839a8
Signed-off-by: hao_chou <hao_chou@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51249
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Wayne3 Wang <wayne3_wang@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia9e57f34eceaf1925dc5e3ffa6370ba0241447a4
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
Lindar/Lillipup uses the WIFI_SAR_ID field in FW_CONFIG to pick which
SAR table to load.
BUG=b:178302811
BRANCH=volteer
TEST=build and test no lindar/lillipup
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: Ibe829062033ba8246b9d9550cdcdc360f5f67dd3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: YH Lin <yueherngl@google.com>
|
|
Add FW_CONFIG WIFI_SAR_ID fields in devicetree.
BUG=b:178302811
BRANCH=volteer
TEST=build and test on lindar/lillipup
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I7ec37b80ffca6924f1f0952dcfbc43c378a70923
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51386
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fleex will use SSFC to support RTL5682.
BUG=b:178653122
TEST=abuild
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Icb06eabe297c5562bd2171b52cc9671c342e6dfd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
|
|
Update GPP_A10 and GPP_H17 configuration to meet LTE power sequence
specification.
- FCPO (GPP_A10) should not turned off during warm reset.
BUG=b:177177967
BRANCH=dedede
TEST=Verified LTE power signal waveforms during powering on and off
Change-Id: I469f9c94ebd6bf2b68a0edc74f229158d82d0ef8
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
I was bugged by spurious "Failed to enable LTR" messages for years.
Looking at the the current algorithm, it is flawed in multiple ways:
* It looks like the author didn't know they implemented a
recursive algorithm (pciexp_enable_ltr()) inside another
recursive algorithm (pciexp_scan_bridge()). Thus, at every
tree level, everything is run again for the whole sub-
tree.
* LTR is enabled no matter if `.set_ltr_max_latencies` is
implemented or not. Leaving the endpoints' LTR settings
at 0: They are told to always report zero tolerance.
In theory, depending on the root-complex implementation,
this may result in higher power consumption than without
LTR messages.
* `.set_ltr_max_latencies` is only considered for the direct
parent of a device. Thus, even with it implemented, an
endpoint below a (non-root) bridge may suffer from the 0
settings as described above.
* Due to the double-recursive nature, LTR is enabled starting
with the endpoints, then moving up the tree, while the PCIe
spec tells us to do it in the exact opposite order.
With the current implementation of pciexp_scan_bridge(), it is
hard to hook anything in that runs for each device from top to
bottom. So the proposed solution still adds some redundancy:
First, for every device that uses pciexp_scan_bus(), we enable
LTR if possible (see below). Then, when returning from the bus-
scanning recursion, we enable LTR for every device and configure
the maximum latencies (if supported). The latter runs again on
all bridges, because it's hard to know if pciexp_scan_bus() was
used for them.
When to enable LTR:
* For all devices that implement `.set_ltr_max_latencies`.
* For all devices below a bridge that has it enabled already.
Change-Id: I2c5b8658f1fc8cec15e8b0824464c6fc9bee7e0e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51328
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since no board overrides the weak get_gpe_table function,
gpe_configure_sci wasn't called for any variant, so drop the function.
TEST=none
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3de204cc808449b625e1fa1e79fe653608e4b88a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
This change select the Kconfig to pre-allocate the Intel-recommended bus
and memory resources per-PCIe TBT root port for the adlrvp mainboard.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ic56ebab02e50a466662a07d122d8f40eaf16b54b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51461
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change select the Kconfig to pre-allocate the Intel-recommended bus
and memory resources per-PCIe TBT root port for the brya0 mainboard.
TEST=snippet from dmesg logs shows the correct resources being allocated:
PCI: 00:07.0 resource base 27fc00000 size 1c000000 align 20 gran 20 limit 29bbfffff flags 60181202 index 24
PCI: 00:07.0 resource base 83000000 size c200000 align 20 gran 20 limit 8f1fffff flags 60080202 index 20
PCI: 00:07.1 resource base 29bc00000 size 1c000000 align 20 gran 20 limit 2b7bfffff flags 60181202 index 24
PCI: 00:07.1 resource base a0000000 size c200000 align 20 gran 20 limit ac1fffff flags 60080202 index 20
PCI: 00:07.2 resource base 2b7c00000 size 1c000000 align 20 gran 20 limit 2d3bfffff flags 60181202 index 24
PCI: 00:07.2 resource base ac200000 size c200000 align 20 gran 20 limit b83fffff flags 60080202 index 20
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I6b520ae50f19a730263de7918594718f3b4b1c1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51455
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Intel ADL BIOS specification #627270 recommends reserving the
following resources for each PCIe TBT root port:
- 42 buses
- 192 MiB Non-prefetchable memory
- 448 MiB Prefetchable memory
Add a mainboard Kconfig which will auto-select these recommended values,
in addition to PCIEXP_HOTPLUG.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Icdfa2688d69c2db0f98d0523d5aba42eec1824db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51460
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The _DSD is generated at runtime using the Intel common pcie
driver, therefore remove it from the ASL files.
BUG=b:182522802, b:182478306
TEST=boot into latest kernel, no thunderbolt driver errors
seen
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Iee25a77bf5cc6636f46a5c32f3eeabe8524e0a04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51454
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The _DSD is generated at runtime using the Intel common USB4
driver, therefore remove it from the ASL files.
BUG=b:182522802, b:182478306
TEST=boot into latest kernel, no thunderbolt driver errors
seen
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I77dc283aeb5f52191255137e941487cf68cb7970
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51453
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add touchpad into devicetree for blipper.
BUG=b:172787208
BRANCH=dedede
TEST=built blipper firmware and verified touchpad function
the kernel log: found RMI device, manufacturer: Synaptics
Change-Id: I2c9b61ba9d282f994e2f756bafe4af1091d4d617
Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51188
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Done for consistency with other platforms. This also drops redundant S3
resume logging, as `southbridge_detect_s3_resume` already prints it.
Tested on Asrock B85M Pro4, still boots and still resumes from S3.
Change-Id: Id96c5aedad80702ebf343dd0a351fbd4e7b1c6c1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The `HPET_ADDRESS` Kconfig option has the same value. Use it instead.
Change-Id: I268e949d4396aa20e38f719b36cc4e6226efe082
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This reverts commit 87a1bd696d47f80101e46132efae8cad8cfe5c7e.
Reason for revert: skin temperature is overheating due to boost time is too long
BUG=b:175364713
TEST=1. emerge-zork coreboot
2. run balance performance and skin temperature test => pass
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Change-Id: I31db06f4bcb986398e7bd2ac2858ffbedb257e2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
MT8192 devapc supports remapping domains.
There may be different domain bit for different subsys.
For example, domain bit in INFRA is 4-bit, while in MMSYS,
domain bit is 2-bit. For INFRA master to access MM registers,
the domain bit will change from 4 to 2 and need to be remapped.
In this patch we have remapped:
1. TINYSYS (3-bit to 4-bit)
- domain 3 to domain 3
- others to domain 15
2. MMSYS slave (4-bit to 2-bit)
- domain X to domain X, for X = 0 ~ 3
- others to domain 0
Change-Id: Id10a4c0bdf141cc76a386159896c861d0dc302aa
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49790
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The SKU ID for Asurada should come from AP ADC channel 5 and 6.
BUG=None
TEST=make; boots on asurada
Change-Id: I6a00c555f20aca4cd7f8bcee46ee81c17ef6ca3c
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Move the initialization from bootblock to romstage for following reasons:
- Follow MT8183 initialization sequence.
- PMIC and RTC functions are only called after verstage.
- Reduce bootblock size.
- PMIC initialization setting is complex and may need to be changed by
an RW firmware update.
TEST=boot to kernel successfully
Change-Id: I3e4c3f918639590ffc73076450235771d06aae91
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Xi Chen <xixi.chen@mediatek.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
BUG=b:180531661
TEST=builds
Signed-off-by: Mathew King <mathewk@chromium.org>
Change-Id: I5feeead1dcb368c5173901f5cab411f439dffede
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51475
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Let the linker do its job.
This fixes building with !CONFIG_PCIEXP_HOTPLUG on some platforms.
Change-Id: I46560722dcb5f1d902709e40b714ef092515b164
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51417
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
BUG=b:181690884
TEST=builds
Signed-off-by: Mathew King <mathewk@chromium.org>
Change-Id: I8ceeb8db24be34588b370c13d865753f095e4be6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51472
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
To use this, Enable "CONFIG_RUN_FSP_GOP" in the platform's Kconfig.
BUG=b:171234996
TEST=Boot Majolica with GOP graphics
Change-Id: Ic9401cc93ee50fb7dbd84fe26ef24306a1673f58
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
The Picasso APUs advertise 23 MCA banks in the lower byte of the
IA32_MCG_CAP MSR, which is more than the 7 core MCA banks.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3e1c8ed437820b350c78b0517e6521582002ee1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The bank names were copied over from Stoneyridge, but they don't match
for Picasso.
TEST=Checked the Picasso PPR.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia86cf3874f8b16b007bad46535af6dafb776fbdd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51476
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This enables the standard library method of adding SPDs to CBFS.
BUG=b:178715165
TEST=Build
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I2ec94fd866409e1dfa5cb65f6960ea07cbe22f2a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51022
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the option to build guybrush firmware with support for EM100.
This will assist in bringup of the new board.
BUG=b:180723776
TEST=builds
Signed-off-by: Mathew King <mathewk@chromium.org>
Change-Id: I2246d2952f341cd8fff8fd486cf989cdb7929411
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51071
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since not all mainboards based on the Cezanne SoC have to support ACPI
resume, select this option in the mainboard's Kconfig and not in the
SoC's Kconfig.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I988276ccb5b61837d7f3f015d1d1aba783324b02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Needed to get the _SX ASL methods.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6323ba413a21d9d867727dbb28340e6df807c86a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, `check-fmap-16mib-crossing` compares the offset and end of
each SPI flash region to 16MiB to ensure that no region is placed
across this 16MiB boundary from the start of SPI flash. What really
needs to be checked is that the region isn't placed across the 16MiB
boundary from the end of BIOS region. Thus, current check works only
if the SPI flash is 32MiB under the assumption that the BIOS region
is mapped at the top of SPI flash. However, this check will not work
if a flash part greater than 32MiB is used.
This change replaces the hardcoded boundary value of 16MiB with a
value calculated by subtracting 16MiB from the SPI flash size (if it
is greater than 16MiB). This calculated value is used as the boundary
that no region defined in the flashmap should be placed across.
The assumption here is that BIOS region is always placed at the top of
SPI flash. Hence, the standard decode window would be from
end_of_flash - 16M to end_of_flash (because end_of_flash =
end_of_bios_region). Currently, there is no consistency in the name
used for BIOS region in flashmap layout for boards in
coreboot. But all Intel-based boards (except APL and GLK) place BIOS
region at the end of SPI flash. Since APL and GLK do not support the
extended window, this check does not matter for these platforms.
Change-Id: Icff83e5bffacfd443c1c3fbc101675c4a6f75e24
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51359
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Perform some cosmetical changes:
* Override the first prerequisite so we can use `$<`.
* Add/remove whitspace to align things (recipe needs to be indented
by a single tab only).
* We can use shell variables inside double quotes. To make the
end of the variable name clear, use braces, e.g. "${x}".
NB. Most of the double quotes are unnecessary. They only change
the way the script would be failing in case of spurious whitespace.
* Break some lines doing multiple things at once.
* To reduce remaining clutter, put reading numbers into a shell
function.
And functional changes:
* No need to spawn `cat`, the shell can redirect input as well as
output (using `<`).
* To read a number from the `fmap_config.h`, we spawned 4 processes
where a single one can achieve the same. With one exception: GNU
awk refuses to parse hex numbers by default. Luckily, it turned
out that we don't need intermediate decimal numbers: Shells can
do arithmetic with hex values as well.
Change-Id: Ia7bfba0d7864fc091ee6003e09b705fd7254e99b
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51325
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Currently, if everything worked fine, `$fail` will be unset, leading
to the following `if` statement:
if [ -eq 1 ]
Resulting in the error message:
/bin/sh: line 9: [: -eq: unary operator expected
Fix this by removing the whole `if`, we can just use `exit`.
Change-Id: I1bc7508d2a45a2bec07ef46b9c5d9d0b740fbc74
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This adds the Guybrush APCBs into the AMD firmware binary.
BUG=b:182510885
TEST=Build
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Iba40cab1d68e9f8d7291e7d715be185a3b6249f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51418
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
Pass PCI_VGA_RAM_IMAGE_START as VBIOS image pointer for GOP driver.
BUG=b:171234996
Change-Id: I504f808d85d8084e6f32f73cebf02fb0f784cd73
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51421
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Pass PCI_VGA_RAM_IMAGE_START as VBIOS image pointer for GOP driver.
BUG=b:171234996
BRANCH=Zork
Change-Id: I49adcacf2abb914e460fbc87b488a22dca8c8af2
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Load VBIOS in pci set_resources to PCI_VGA_RAM_IMAGE_START (0xc0000)
since pci_dev_init() will not load it in GOP case (VGA_ROM_RUN is not
set). Add Cezanne GFX PID.
BUG=b:171234996
BRANCH=Zork
Change-Id: I4a6fea9b6cd60c862e15ed2ed539869c0f9bd363
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
BUG=b:180507937
TEST=builds
Signed-off-by: Mathew King <mathewk@chromium.org>
Change-Id: Icb8aba87390475cad7a2a9911c3832a59c987b65
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51240
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
