summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2016-04-05chromeos: Add enable-serial GBB flagPatrick Georgi
This mirrors vboot's flag table. BUG=chromium:595715 BRANCH=none TEST=none Change-Id: I4473eb6c0e073f555e6a692a447e8cc85f8e4eeb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0fc50a6cff5ba900e6407d58a8f18db63b5946a5 Original-Change-Id: Ieabd3f9391ba256557e18386f334558d64a81694 Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/336630 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14238 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-05mediatek/mt8173: fix incorrect indentYidi Lin
BUG=none BRANCH=none TEST=emerge-oak coreboot Change-Id: Ia5f2bc9b021b9051f2e5035c5d295b6b9eea1301 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7304016041d42a5317448fc2f9c58c6e6715fc25 Original-Change-Id: I7bcd1cf8dabbe190fcbc62cbf6b3a34430a97b21 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/336592 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14236 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-05google/oak: Log hardware watchdog in eventlogJulius Werner
The MT8173 hardware watchdog can assert an external signal which we use to reset the TPM on Oak. Therefore we do not need to do the same double-reset dance as on other Chromebooks to ensure that we reset in a correct state. Still, we have a situation where we need to reconfigure the watchdog early in the bootblock in a way that will clear information about the previous reboot from the status register, and we need that information later in ramstage to log the right event. Let's reuse the same watchdog tombstone mechanism from other boards, except that we don't perform a second reset and the tombstone is simply used to communicate between bootblock and ramstage within the same boot. BRANCH=None BUG=None TEST=Run 'mem w 0x10007004 0x8' on Oak, observe how it reboots and how 'mosys eventlog list' shows a hardware watchdog reboot event afterwards. Change-Id: I1ade018eba652af91814fdaec233b9920f2df01f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 07af37e11499e86e730f7581862e8f0d67a04218 Original-Change-Id: I0b9c6b83b20d6e1362d650ac2ee49fff45b29767 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/334449 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/14234 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-04-05google/chell: Adjust nuvoton 8825 button thresholds again.Benson Leung
Changing these thresholds again for new tuning in March of 2016. Something's changed in the latest firmware to cause all values previously read on Chell to float down. Set "nuvoton,sar-threshold" property to thresholds based on tuning with the Android Wired Headphone Compatibility Kit and Chell DVT. Signed-off-by: Benson Leung <bleung@chromium.org> BUG=chrome-os-partner:49333 BRANCH=none TEST=Run evtest, selecting the input event for sklnau8825adi Using the Nominal headphones from the kit, check that the buttons for "KEY_VOLUMEDOWN", "KEY_VOLUMEUP", "KEY_MEDIA", and code 582 (?) (should be voice search, but evtest doesn't understand) All of these buttons should work properly. Change-Id: Ie5ff1d35599d2cca5ce76467ecd7ec3ecab42d8b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1d13e967addb5cd31e6196e32541cda97ae00257 Original-Change-Id: I11de7a0853a3598f3834e8bae3140b9942cbd0b0 Original-Reviewed-on: https://chromium-review.googlesource.com/334402 Original-Commit-Ready: Benson Leung <bleung@chromium.org> Original-Tested-by: Benson Leung <bleung@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14233 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-05chromeos: Simplify fill_lb_gpios even furtherJulius Werner
A long time ago many Chrome OS boards had pages full of duplicated boilerplate code for the fill_lb_gpios() function, and we spent a lot of time bikeshedding a proper solution that passes a table of lb_gpio structs which can be concisely written with a static struct initializer in http://crosreview.com/234648. Unfortunately we never really finished that patch and in the mean time a different solution using the fill_lb_gpio() helper got standardized onto most boards. Still, that solution is not quite as clean and concise as the one we had already designed, and it also wasn't applied consistently to all recent boards (causing more boards with bad code to get added afterwards). This patch switches all boards newer than Link to the better solution and also adds some nicer debug output for the GPIOs while I'm there. If more boards need to be converted from fill_lb_gpio() to this model later (e.g. from a branch), it's quite easy to do with: s/fill_lb_gpio(gpio++,\n\?\s*\([^,]*\),\n\?\s*\([^,]*\),\n\?\s*\([^,]*\),\n\?\s*\([^,]*\));/\t{\1, \2, \4, \3},/ Based on a patch by Furquan Shaikh <furquan@google.com>. BUG=None BRANCH=None TEST=Booted on Oak. Ran abuild -x. Change-Id: I449974d1c75c8ed187f5e10935495b2f03725811 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14226 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2016-04-04soc/intel/apollolake: Fill northbridge ASLZhao, Lijian
Northbridge resource assignment: Dynamicly update memory resources for northbridge devices, exclude any fixed MMIO resources. Change-Id: I9595f9a12434fa423862836d19f7266d6023fc5a Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/13371 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-04mainboard/emulation/qemu-power8: Use correct bootblock locationTimothy Pearson
Change-Id: Ia1e8f7c11708208638f83dc1058f1754e69d4d0c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14020 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2016-04-04arch/power8: Position bootblock start at reset vectorTimothy Pearson
Change-Id: I99c3b4dd0c4da41b99bc108977079c8069afc0bd Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14019 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2016-04-02superio/nuvoton: Use official spelling of Nuvoton in `CHIP_NAME`Paul Menzel
The official spelling of Nuvoton is not all uppercase. Only the first letter is uppercase. See the footer of the Nuvoton Web site. Change-Id: I6ccd4194d7be0c89f8b332fcca5feb2420a4de1e Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/5928 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-02soc/intel/apollolake: use platform_segment_loaded() for CAR coherencyAaron Durbin
Instead of using arch_segment_loaded() implement platform_segment_loaded() so as not to tangle the notion of arch and the chipset. Lastly, add a TODO to allow filtering of the L1D to L2 flush depending on the region loaded. Change-Id: I52e7cd2ae6e2d95f21bdd2fe1a471a10565309cb Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14215 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-04-02lib/prog_loading: introduce prog_segment_loaded()Aaron Durbin
In order to not muddle arch vs chipset implementations provide a generic prog_segment_loaded() which calls platform_segment_loaded() and arch_segment_loaded() in that order. This allows the arch variants to live in src/arch while the chipset/platform code can implement their own. Change-Id: I17b6497219ec904d92bd286f18c9ec96b2b7af25 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14214 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-04-02arch/x86: notify the system when the postcar parameter was updatedAaron Durbin
While rmodule_load() calls arch_segment_loaded() when it's done loading any pieces of code which further modify it, like changing parameters within the program itself, need to notify the rest of the system. Change-Id: Ia3374b58488120ba6279592a77d7f9c6217f1215 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14213 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-04-02soc/intel/apollolake: use arch_segment_loaded() for CAR code coherencyAaron Durbin
Instead of using platform_prog_run() for flushing programs from L1D to L2 for code coherency purposes use arch_segment_loaded() instead as that it's primary purpose. The arch_segment_loaded() is called within the infrastructure at the appropriate places when loading programs. Therefore use that to perform the L1D flush instead of when something is just about to run. Change-Id: Ib0a6be6f676dcf2c946ef5702471af65d89133e9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14212 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-04-02drivers/intel/fsp2_0: signal that FSP components are loadedAaron Durbin
In order for the platform code to handle situations where special actions are required after a piece of code is loaded use arch_segment_loaded() to signal to the platform code that the component is fully loaded into memory. Change-Id: I119cfc9913f15eb4968fe5bf6a56589e2c53f2d1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14211 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-04-02soc/intel/apollolake: use CAR code coherency for all CAR stagesAaron Durbin
The flush L1D to L2 operation was only being used when loading romstage from bootblock. However, when the FSP-M component is loaded no code coherency actions are taken. I suspect this is because the FSP-M component is larger than the 24KiB L1D and the entry point is early in the image. Thus, when loading the FSP-M component the earlier part of the image is flushed out to L2 in the process of loading the latter part of the component. Also, once verstage is introduced the same code coherency actions need to be taken as well. Therefore, position the apollolake code to handle all these cases. Change-Id: Ie71764f1b420a6072c4f149ad3e37278b6cb70e1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14210 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-04-01nb/amd/mct_ddr3: Fix revision mask for DR processorsTimothy Pearson
The revision mask for all DR-* series processors was incorrectly set to only include the DR-B revision mask. Include all DR-* series prcessors in the DR_ALL revision mask. Change-Id: Iceda96aa6267b24abcbf78d39f4848d2be8053b8 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Found-by: Coverity, CID 1229627 (#1 of 1): Logically dead code (DEADCODE) Reviewed-on: https://review.coreboot.org/14216 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-04-01soc/intel/apollolake: Fix MMIO reserved ranges calculationAndrey Petrov
mmio_resource() takes memory address in kilobytes. This patch adds resources properly. Change-Id: Id78dcecf05ad5b2c84e5bb5445ae3a4e4ec9d419 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14203 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-01intel/gma: Fix VBT generationPatrick Rudolph
The log shows the following error on systems that use the native gfx init. The error isn't shown using the VBIOS blob: GET_VBIOS: aa55 8086 0 3 0 VBIOS not found. Don't shift the class-code, as it's already shifted by the PCI layer. Tested-on: x220 Tested-by: Alexander Couzens <lynxis@fe80.eu> Change-Id: I69018940dd51966b45774e0576a1380f90716dce Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14188 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-03-31vendorcode/amd/agesa/*/AGESA.h: Correct "ne" to "be" in commentPaul Menzel
The typo is not present anymore in Family 16h (Kabini), so fix it for the older families (Family 10h, 12h, 14h, 15h, 15h Trinity) too using the command below. $ git grep -l ' ne ' src/vendorcode/amd/agesa | xargs sed -i 's/ ne / be /g' Change-Id: I9cb419251eeec79925f48a5832fac339d40f01d1 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/5543 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-03-31nb/amd_mct_ddr3: Move DRAM MCE sync flood enable to ramstageTimothy Pearson
Enabling sync flood on DRAM MCE directly after ECC clear can lead to a system hang with no way to determine the offending DRAM module. Clear MCEs after ECC setup, but do not enable sync flood until NB setup in ramstage to allow time for any MCEs to accumulate in the status registers. Before enabling sync flood on MCE, determine if any MCEs were logged during ramstage execution and display them on the serial console. Also clear the DRAM ECC sync flood bits during DRAM training and initial ramstage execution. Change-Id: Ibd93801be2eed06d89c8d306c14aef5558dd5a15 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14192 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-31src/: Fix lint style-labels warningsMartin Roth
The lint-stable-004-style-labels check tries to verify that labels in c and asm files start at the first column, and don't have whitespace in front of them. This fixes the 2 actual violations of the lint check. Change-Id: Ia11a90d7301e62a116c7a9ef9b4c2bc3f982b308 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14193 Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins)
2016-03-31nb/amd/mct_ddr3: Clear early MCEs and report DRAM MCEsTimothy Pearson
During power on from cold (S5) state, numerous MCEs are generated before DRAM training starts, e.g. during HT link training. Clear these MCEs before DRAM training start, and report any MCEs generated during DRAM training. Change-Id: I7d047571242e5bd041e4aac22c1ec1d7d26ef0e6 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14191 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-31nb/amd/mct_ddr3: Disable MCE framework during DRAM trainingTimothy Pearson
On Family 15h processors, with certain RDIMMs, MCEs are generated as a normal part of DCT startup / DRAM training. Disable sync flood on parity or UC data error until ECC has been enabled. Change-Id: Ife54751ff127ffd59baaad35d3fea14ea01ef505 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14186 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-30nb/amd/mct_ddr3: Enable DIMM parity when RDIMMs installedTimothy Pearson
This resolves a long-standing issue with RDIMM control word configuration failure, likely due to random parity failure. Change-Id: If8b8dc5b8b99f4c2fe29b3a133b064631e4693be Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14184 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-30northbridge/amd/amdfam10: Add family15h model10h-1fh (Trinity)Damien Zammit
Change-Id: I96d695ed10176276116fcf3a2b77605fb3f2d5db Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13710 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-30nb/intel/sandybridge/raminit: move ram training into seperate functionPatrick Rudolph
In order to add a fallback mechanism, move the ram training code into a new function. This function will be called multiple times and must return error or success to the calling function. Change-Id: I5ee1b3a528290d8252d236b9152b81291736958a Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14169 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-30storm: Fix compilation errorFurquan Shaikh
Somehow the missing header file in https://review.coreboot.org/#/c/14182 did not trigger compilation errors before. Add the required header file to enable proper compilation of storm. Change-Id: I83c8f2b5fc41e38c1385ff405370753e6eba2abc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14185 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-03-29intel/skylake: Enable PROCHOTPratik Prajapati
This patch would enable PROCHOT feature in skylake. Asserting PROCHOT line would throttle the GPU/CPU. BUG=chrome-os-partner:51142 BRANCH=glados TEST=manually tested on lars. asserting PROCTHOT by EC reduces FSP in fish-tank from approx 40 to 20. (50 fish setting), also CPU freq. drops to from 1600000 to 400000 Change-Id: I8fc0c015ea2c26d20bbbfc619f720f231d540feb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1b88b1f183df9c7362d7e58acb0a1fa0b076d56e Original-Change-Id: Ida8636efc3d8da56ebd3931144d31ab1b88fe806 Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/331690 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-(cherry picked from commit d091a999c3827179182b62a1274a9b3581f7f006) Original-Reviewed-on: https://chromium-review.googlesource.com/333073 Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/14120 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-29google/chell: Update DPTF thermal parametersDuncan Laurie
MinPL1: 2.5W MaxPL1: 7W StepPL1: 0.25W _PSV(TSR2): 51C _TRT(TSR2): 9 second BUG=chrome-os-partner:49859 BRANCH=glados TEST=build and boot on chell Change-Id: I69de1d66fb0d52ad0ad77eb51ca56f50fc44c255 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 845f1d046a5143057d683b2bd9cf5dab2ab2ef34 Original-Change-Id: I8a161c979a22621f5f854926677cb7835f8ce88b Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/332857 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-(cherry picked from commit 4d5023524591fc6b651a199874ed990bd5be1d50) Original-Reviewed-on: https://chromium-review.googlesource.com/333071 Reviewed-on: https://review.coreboot.org/14119 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-29intel/kunimitsu: configure native mode for GPP_E21Youvedeep Singh
GPP_E_21_DDPC_CTRLDATA is pulled low by default. This causes 2.5mW leakage from 3.3S to GND via R877. So configuring GPP_E21 in native mode. BUG=chrome-os-partner:50958 BRANCH=glados TEST=Build and boot. Measure Power at 3P3S(R955). Change-Id: I2bdcb698d0b0cd3228c2e59653ac3fb3b1a26951 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d01f932cda44b0b44c5494b316aefc43c8b84c52 Original-Change-Id: Ifd13ea4b16108ef98d09891365f0d17831ab5f65 Original-Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332369 Original-Commit-Ready: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14108 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-29vboot: Handle S3 resume path for TPM initializationDuncan Laurie
When doing verification of memory init code in verstage vboot should issue a TPM_Startup(ST_STATE) instead of TPM_Startup(ST_CLEAR) in order to preserve the flags in TPM_STCLEAR_FLAGS which include things like physical presence. In doing so we can also skip the rest of the TPM init work in this function in the S3 resume path. BUG=chrome-os-partner:50633 BRANCH=glados TEST=S3 resume on chell and ensure TPM is resumed instead of being cleared and that 'tpmc getvf|getpf|getf' does not show any difference in flags between boot and resume. Change-Id: I7a48eaf7f57d2bc6ebc182178cbe60ceb2ad8863 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f059f39a0f5c2f21e564b9554efacf26a41ad794 Original-Change-Id: I647869202d2f04328764155d3de4cad9edf10ae4 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Previous-Reviewed-on: https://chromium-review.googlesource.com/332434 Original-(cherry picked from commit 5fc7792e4104523569140cd84ce313da721ec34b) Original-Reviewed-on: https://chromium-review.googlesource.com/332542 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14107 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-29intel/fsp1_1: Do not re-init TPM in romstage if already setup in verstageDuncan Laurie
For platforms that do verification of memory init (and have verstage execute before romstage) FSP should not attempt to re-initialize the TPM again in romstage as it has already been done. BUG=chrome-os-partner:50633 BRANCH=glados TEST=boot and resume on chell and ensure TPM is not re-initialized Change-Id: Ied6f39dc8dacdbc3d76070b6135de2308196ff53 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fefd4d4b3fde4c7fe4b6de304790914b7a2f87d8 Original-Change-Id: I60a2e4e2d73270697218f094527e09d444e6ab56 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Previous-Reviewed-on: https://chromium-review.googlesource.com/332433 Original-(cherry picked from commit 2de1fd57fe1db7960e0bb86c64dccf827fa55742) Original-Reviewed-on: https://chromium-review.googlesource.com/332299 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14106 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-29nb/intel/sandybridge/raminit: move dimm_info into ramctr_timingPatrick Rudolph
It's required to store the dimm_info in ramctr_timing as only ramctr_timing is written to mrc cache. Allows to fill SMBIOS type 17 if mrc cache is used. Change-Id: I7634b05069df307d471938d9854997a018de81b3 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14168 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-29ipq806x/storm: Return NULL for cbmem_top if DRAM is not initializedFurquan Shaikh
DRAM initialization on storm requires ipq blobs to be loaded from cbfs. vboot_locator first checks cbmem_find to see if cbmem is initialized and contains selected region info, else it falls back to vboot work buffer. Since cbmem_find calls into cbmem_top to identify the location of cbmem area, board/chipset is expected to return NULL until the backing store is ready, which in this case until DRAM is initialized in romstage, return NULL for cbmem_top. Change-Id: I1880ce61dcfdabaa527d7a6dcc3482dfe5d5fd17 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14182 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-29cbmem: Add comment for cbmem_top returning NULL if backing store is not readyFurquan Shaikh
Board or chipset needs to ensure that cbmem backing store is ready when returning the cbmem top address. cbmem infrastructure has no support for checking the validity of the backing store/address. E.g.: If romstage handles cbmem coming online, chipset or board need to ensure that call to cbmem_top in romstage returns NULL if the backing store is not yet initialized. Add a comment to ensure that developers know this requirement while implementing cbmem_top for future chipsets/boards. Change-Id: I0086b8e528f65190b764a84365cf9bf970b69c3f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14181 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-29nvidia/ck804/sata: Remove space before newline in debug outputPaul Menzel
In the board status repository, there is trailing whitespace in the coreboot log of the board ASUS KFSN4-DRE. ``` SATA S SATA P ``` Remove it, as it’s unnecessary. Change-Id: I5c505eb7c734dca3fa18235e2bc0bc82b5b50b16 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/14175 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
2016-03-28nb/amd/mct_ddr3: Use standard C function calls in mct_ResetDataStruct_D()Timothy Pearson
Replace open coded memset() functions with calls to the library function. The new code also explicitly backs up and restores the data structures that are preserved across calls to mct_ResetDataStruct_D(), and no longer relies on structure member order to function correctly. Change-Id: I6dd6377deda0087cd1b65f7555588978657d6516 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14165 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-26nb/amd/amdmct: Select max_lanes based on ECC presence or absenceDamien Zammit
Change-Id: Ic5482dc13ab7b53ec4df408bbe32d20888ae2e12 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13725 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-25google/intel mainboards: Add missing board_info.txt filesMartin Roth
The lint script didn't catch that these mainboard directories didn't have board_info files. Add all missing board_info.txt files Change-Id: Ib1d61a3c04e91b22480527885faf60c22093d98a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14117 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-03-25intel/fsp_baytrail: Fix I2C abort logicBen Gardner
A call to i2c_read() for a non-existent address followed by an i2c_read() to a valid address results in a false abort status for the 2nd call. i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT) i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0x4000000 (I2C_ERR_ABORT) Because the abort status register is cleared on read and wait_tx_fifo() reads it twice, the returned status does not contain the abort status. Fixing that changed the 2nd read to reflect the abort status. i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT) i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0x4000001 (I2C_ERR_ABORT) Bit 0 indicates that the address was not acknowledged by any slave. That's the abort status from the previous transaction. So I added a read of the abort status before starting a transaction in both i2c_read() and i2c_write(). i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT) i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0 (I2C_SUCCESS) Tested on a Bay Trail E3845 SoC. Change-Id: I39e4ff4206587267b6fceef58f4a567bf162fbbe Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14160 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2016-03-25intel/fsp_baytrail: Use read32() and write32() in i2c.cBen Gardner
i2c.c uses "*(volatile unsigned int *)" constructs where it could use read32() and write32(). Switch to using read32() and write32(). The remaining instances in wait_tx_fifo() and wait_rx_fifo() are fixed in https://review.coreboot.org/#/c/14160/ Change-Id: I39e4ff4206587267b6fceef58f4a567bf162fbbe (intel/fsp_baytrail: Fix I2C abort logic) I also fixed a few minor white space issues. Change-Id: I587551272ac171ef1f42c7eb26daf877dc56646b Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14162 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2016-03-24nb/amd/mct_ddr3: Set the NBP0 read latency from P0 trained valuesTimothy Pearson
During maximum read latency training on Family 15h processors, the maximum read latency was incorrectly set from the NBP1 value instead of the correct NBP0 value. Modify maximimum read latency training to explicitly operate on the NBP0 value, and store the previously calculated NBP1 value for reference by other portions of the training algorithm. Change-Id: I5d4a6c2def83df3e23f1a4c598314c31a0172cd7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14150 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-03-24edid: Add helper function to calculate bits-per-pixel dependent valuesJulius Werner
Coreboot and most payloads support three basic pixel widths for the framebuffer. It assumes 32 by default, but several chipsets need to override that value with whatever else they're supporting. Our struct edid contains multiple convenience values that are directly derived from this (and other properties), so changing the bits per pixel always requires recalculating all those dependents in the chipset code. This patch provides a small convenience wrapper that can be used to consistently update the whole struct edid with a new pixel width instead, so we no longer need to duplicate those calculations everywhere. BUG=None TEST=Booted Oak in all three pixel widths (which it conveniently all supports), confirmed that images looked good. Change-Id: I5376dd4e28cf107ac2fba1dc418f5e1c5a2e2de6 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14158 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-23nb/amd/mct_ddr3: Remove spurious Addl_Index variable in ↵Timothy Pearson
dqsTrainMaxRdLatency_SW_Fam15() Change-Id: Ic3f636983cf6ba2796ee56e2a25b56513a4343c1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14148 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-23armv7: Word-sized/half-word-sized memory operations for 32/16 bit read/writePaul Kocialkowski
As a follow up to Change-Id: I1fb3fc139e0a813acf9d70f14386a9603c9f9ede, use as builtin compiler hint instead of inline assembly to allow the compiler to generate more efficient code. Change-Id: I690514ac6d8988a6494ad3a77690709d932802b0 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/12083 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-23soc/intel/apollolake: utilize postcar phase/stageAaron Durbin
The current Apollolake flow has its code executing out of cache-as-ram for the pre-DRAM stages. This is different from past platforms where they were just executing-in-place against the memory-mapped SPI flash boot media. The implication is that when cache-as-ram needs to be torn down one needs to be executing out of DRAM since the act of cache-as-ram going away means the code disappears out from under the processor. Therefore load and use the postcar infrastructure to bootstrap this process for tearing down cache-as-ram and subsequently loading ramstage. Change-Id: I856f4b992dd2609b95375767bfa4fe64a267d89e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14141 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-23arch/x86: introduce postcar stage/phaseAaron Durbin
Certain chipsets don't have a memory-mapped boot media so their code execution for stages prior to DRAM initialization is backed by SRAM or cache-as-ram. The postcar stage/phase handles the cache-as-ram situation where in order to tear down cache-as-ram one needs to be executing out of a backing store that isn't transient. By current definition, cache-as-ram is volatile and tearing it down leads to its contents disappearing. Therefore provide a shim layer, postcar, that's loaded into memory and executed which does 2 things: 1. Tears down cache-as-ram with a chipset helper function. 2. Loads and runs ramstage. Because those 2 things are executed out of ram there's no issue of the code's backing store while executing the code that tears down cache-as-ram. The current implementation makes no assumption regarding cacheability of the DRAM itself. If the chipset code wishes to cache DRAM for loading of the postcar stage/phase then it's also up to the chipset to handle any coherency issues pertaining to cache-as-ram destruction. Change-Id: Ia58efdadd0b48f20cfe7de2f49ab462306c3a19b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14140 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-22gpio: Add support for binary_first base3 number systemJulius Werner
This patch adds support for an alternative ternary number system in which group of GPIOs can be interpreted. In this system, the digit combinations that would form a binary number (i.e. that contain no 'Z' state) are used to represent the lower values in the way they're used in the normal binary system, and all the combinations that do contain a 'Z' are used to represent values above those. We can use this for boards that originally get strapped with binary board IDs but eventually require more revisions than that representation allows. We can switch their code to binary_first base3 and all old revisions with already produced boards will still get read as the correct numbers. Credit for the algorithm idea goes to Haran Talmon. BRANCH=None BUG=None TEST=Stubbed out the actual GPIO reading and simulated all combinations of 4 ternary digits for both number systems. Change-Id: Ib5127656455f97f890ce2999ba5ac5f58a20cf93 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14116 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-22lib/rmodule: export parameters in struct rmod_stage_loadAaron Durbin
In order for a caller to utilize an rmodule's parameters section after calling rmodule_stage_load() export the rmodule's parameter pointer in struct rmod_stage_load. Change-Id: I9cd51652cf8cdb3fae773256989851638aa1a60f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14139 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-21soc/apollolake: Add skeleton ACPI entryLance Zhao
Change-Id: Ib127af5392ca2b349480f5b21fad2186b444d7e6 Signed-off-by: Lance Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/13348 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-21nb/intel/sandybridge: increase MMCONF_BASE_ADDRESSPatrick Rudolph
Set MMCONF_BASE_ADDRESS to 0xf8000000. It was already done for some boards, but not all. The sandybridge chipset code assumes 64 pci buses behind MMCONF. Therefore, only 64MiB of physical address space is required. Increasing the address allows to use additional 128MiB of MMIO space and to use the Intel IGD and a PEG at the same time. Previously it wasn't possible to use both at the same time, as two 256MiB areas won't fit into MMIO space. Test system: * Gigabyte GA-B75M-D3H * Intel Pentium CPU G2130 * Onboard GPU Intel IvyBridge Desktop * PEG GPU AMD RV770 Change-Id: I3bf72439056c8089ada6899bb0605e5cd9d89cd6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14096 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-03-21mediatek/mt8173: Enable ARM trusted firmware integrationPatrick Georgi
In Chromium OS downstream this was done together with adding the support for ATF, but unfortunately ATF upstream isn't ready yet. This commit is a reminder to enable things once ATF caught up. Change-Id: Id0d6908d906a1e54cdda4f232d572d996d9c556f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13968 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-21mediatek/mt8173: Remove bl31 board parameters passing mechanismJimmy Huang
As the DA9212 and MT6311 external buck can be controlled by hardware since rev-5 board, we don't need to pass any board specific parameter to ARM TF. BRANCH=none BUG=none TEST=build pass Change-Id: I43eebe25ab14d3dd84e8bb4286e2bb55c8c3c063 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9c4dfe61c69042e464b384e2e0edbc55eda23a74 Original-Change-Id: I541357fee6afb1ff2d771bcb073f7c9a9db52f00 Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332344 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14124 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-21google/oak: Move external buck initialization to coreboothenryc.chen
Remove the code which is passing parameters to ARMTF and move external buck initilizaton from ARMTF to coreboot. BRANCH=none BUG=none TEST=verified on Oak rev4/rev5 Change-Id: I4f4b30acbee9b42a202b326f2fe4517cb4b9d83c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 37bec54b4d8a3bce38878e292e4821da3959026a Original-Change-Id: Ib81709812a064f6daf13c9b4d6525f1858c81393 Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332343 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14123 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-21mediatek/mt8173: Add da9212 driverhenryc.chen
Add secondary PMIC for external buck control on Oak rev0/1/2/5 BRANCH=none BUG=none TEST=verified on Oak rev4/rev5 Change-Id: Ia000b0c7d61e8396856656247f9627e33b21b19b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 241508e7d781fac8ee085ee81962043dd654c52d Original-Change-Id: I6c75e2462363a5523bf1ebb03af7a36740293624 Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332342 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14122 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-21mediatek/mt8173: Add mt6311 driverhenryc.chen
Add secondary PMIC for external buck control on Oak rev3/4 BRANCH=none BUG=none TEST=verified on Oak rev4/rev5 Change-Id: I24c18a1cf71fc57deacedcbeb6a100b131c28077 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7f7f8ceac795d8193194a6918a73c4b391009025 Original-Change-Id: I312d8281d2c09d8bc43f092edef3e405d51ee7d0 Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332341 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14121 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-21device: Add i2c read/write register field APIYidi Lin
i2c_read_field() - read the value from the specific register field i2c_write_field() - write the value to the specific register field BRANCH=none BUG=none TEST=none Change-Id: I2098715b4583c1936c93b3ff45ec330910964304 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0817fc76d07491b39c066f1393a6435f0831b50c Original-Change-Id: I92c187a89d10cfcecf3dfd9291e0bc015459c393 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332712 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14105 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-21nb/amd/amdmct/mct_ddr3: Ensure BlockRxDqsLock does not remain setTimothy Pearson
Under certain conditions (training abort) BlockRxDqsLock could remain set in violation of the BKDG. Ensure BlockRxDqsLock is reset to 0 after a lane training abort. Change-Id: I1a49a24d02b2b7cacae074794ec274a424a9e66b Reviewed-on: https://review.coreboot.org/14144 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-21soc/intel/quark: Disable the ROM shadowLee Leahy
Disable the ROM shadow and enable RAM for 0x000e0000 - 0x000fffff. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Testing successful display of 0x000ffff0 - 0x000fffff does not match the end of the SPI flash. Change-Id: I6e0a50417815320333eae0b69b96280c39db7eaa Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14110 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-21mainboard/intel/galileo: Enable SPI controllersLee Leahy
Enable the SPI controllers on the Quark SoC. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Load the SPI driver stack * Testing is successful when the time is able to be displayed on a set of seven-segment displays controlled by a Maxim MAX6950 SPI display controller. Change-Id: Ic9c4575730c5a9a27cf9a38a41e82d8462467f3f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14109 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-21device/dram/ddr3: fix debug outputPatrick Rudolph
Add missing punctuation and align output. No functionality is changed. Old logging output: Revision: 11 Type : b Key : 2 Banks : 8 Capacity: 4 Gb Supported voltages: 1.5V SDRAM width : 8 Bus extension : 0 bits Bus width : 64 Optional features : DLL-Off_mode RZQ/7 RZQ/6 Thermal features : ASR ext_temp_range Thermal sensor : no Standard SDRAM : yes DIMM Rank1 Address bits mirrored!!! DIMM Reference card B DIMM Manufacturer ID cd04 DIMM Part number F3-1866C9-8GSR XMP Profile 1 Max DIMMs per channel: 4 XMP Revision: 1.3 Requested voltage: 1500 mV New logging output: Revision : 11 Type : b Key : 2 Banks : 8 Capacity : 4 Gb Supported voltages : 1.5V SDRAM width : 8 Bus extension : 0 bits Bus width : 64 Optional features : DLL-Off_mode RZQ/7 RZQ/6 Thermal features : ASR ext_temp_range Thermal sensor : no Standard SDRAM : yes Rank1 Address bits : mirrored DIMM Reference card: B Manufacturer ID : cd04 Part number : F3-1866C9-8GSR XMP Profile : 1 Max DIMMs/channel : 4 XMP Revision : 1.3 Requested voltage : 1500 mV Change-Id: Iee4d7a7c0e1070706fb60d7316fad49813963b51 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14083 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-21arch/x86: honor CONFIG_X86_TOP4G_BOOTMEDIA_MAP for verstageAaron Durbin
When CONFIG_X86_TOP4G_BOOTMEDIA_MAP was introduced verstage was not updated. Correct this oversight. Change-Id: I2775c08798906ba0ba55a361407d7d2b52313229 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14142 Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Tested-by: build bot (Jenkins)
2016-03-18src/arch/x86/acpi.c: Use correct host address width in DMAR ACPI tableJacob Laska
The previous implementation assumed the CPU physical address size to be 40 which is not true of all platforms. Use an existing function to obtain the correct CPU physical address to report in the DMAR ACPI table. Change-Id: Ia79e9dadecc3f5f6a86ce3789b213222bef482b3 Signed-off-by: Jacob Laska <jlaska91@gmail.com> Reviewed-on: https://review.coreboot.org/14102 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-03-18mtrr: Define a function for obtaining free var mtrrFurquan Shaikh
Instead of hard-coding var mtrr numbers in code, use this function to identify the first available variable mtrr. If no such mtrr is available, the function will return -1. Change-Id: I2a1e02cdb45c0ab7e30609641977471eaa2431fd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14115 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-18google/oak: Enable RAM_CODE_SUPPORTYidi Lin
BRANCH=none BUG=chrome-os-partner:50820 TEST=check /proc/device-tree/firmware/coreboot/ram-code Change-Id: I5ecf45cada7f8999ad607487d5d9281c4fb659ed Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 79d2f0e183a2bde70817d673ae315709f46e3361 Original-Change-Id: I35e91b4e29f8e09acd74770715c96cf7320ac22c Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332564 Original-Reviewed-by: Milton Chiang <milton.chiang@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14104 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-18mediatek/mt8173: mt6391: set VSRMCA7 to HW control by SRCVOLTENhenryc.chen
When system enters suspend, SPM will pull SRCVOLTEN low to turn off some power rails. VSRMCA7 should follow this pin to turn on/off the power. BRANCH=none BUG=none TEST=verified on Oak rev5 Change-Id: I9d81f855a74fe02a59246ce0c6a7f0e162b9fd0a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d92fb1029b810028138eb91b064b63a58b82602f Original-Change-Id: I37ff0694cbd7b17d5a1ae172c463b4e6aae2b99c Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332345 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14103 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-16cpu/x86: compile earlymtrr.c code for romstage as wellAndrey Petrov
In order to make this work earlymtrr.c needed to be removed from intel/truxton/romstage.c. It's not a ROMCC board so there's no reason to be including .c files. Change-Id: If4f5494a53773454b97b90fb856f7e52cadb3f44 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14094 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-16cpu/x86/mtrr: remove early_mtrr_* functionsAaron Durbin
I see no user of any of this code. Remove it. Change-Id: I776cd3d9ac6578ecb0fe6d98f15611e4463afb7a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14098 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-16cpu/x86/mtrr: move cache_ramstage() to its only userAaron Durbin
The Intel i3100 northbridge code is the only user of cache_ramstage(). Therefore, place it next to the sole consumer. Change-Id: If15fb8d84f98dce7f4de9e089ec33035622d8f74 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14097 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-16rockchip: update make_idb.pyhuang lin
make_idb.py only support RK3288 before, add chip parameter, so we can support RK3399 either. Change-Id: I6811acb7f0cdaf1930af9942a70db54765d544d5 Signed-off-by: huang lin <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/13913 Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-16skylake mainboards: Configure gpio PADRSTCFG to PLTRSTNaresh G Solanki
With gpio PADRSTCFG set to DEEP & GPIROUTIOXAPIC=1 & PADRSTCFG, causes IRQ storm after S3 resume. GPIOs that fire IRQs via IOAPIC need to get their logic reset over pltrst and hence configuring PADRSTCFG to PLTRST to prevent IRQ strom after S3 resume. BRANCH=glados BUG=chrome-os-partner:50536 TEST=Build for kunimitsu and Boot on FAB4, no irq storm observed after S3 resume. Change-Id: I7f1ae90aed03778e7d6cb2d79de0efe9a6d9e20d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: aff91da4feaf8f7e42cfeee756cf468288cbfd68 Original-Change-Id: I7cac60fb0144e090b8decb05d948b2d8d2f8deac Original-Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329453 Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com> Original-Tested-by: Naresh Solanki <naresh.solanki@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331174 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13992 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-16parade/ps8640: Clean upPatrick Georgi
Sort out some style issues that were identified by Paul. Change-Id: I9ed946ae613c87234f8c9824eb14b8d28909dfcf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14064 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-15pcengines/apu1: Enable USB overcurrent detection.Tobias Diedrich
The two external USB ports and the internal USB header have overcurrent protection chips with the low-active overcurrent signal connected to the chipset. The power-on default for this register disables the software detection of overcurrent conditions. After setting the register Linux correctly shows the overcurrent condition in the kernel log (tested by shorting the 5v and gnd lines on J14 / the internal USB header): [ 2015.229921] usb usb1-port3: over-current condition [ 2015.449925] usb usb1-port4: over-current condition Simlar for the external ports: [ 256.237916] usb usb1-port1: over-current condition [ 256.458084] usb usb1-port5: over-current condition Note that each signal is shared between two ports: usboc0#: External ports (port1/5) usboc1#: Internal ports (port3/4) Change-Id: I02d498053b8ec61dc206e74a96c4a1dcfd4fae92 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/14084 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15lenovo: add config ONBOARD_VGA_IS_PRIMARYPatrick Rudolph
Fix for the T4xx and T5xx series. It does not apply to X2xx/X6x series as those have only one GPU, which is always connected to the display. The T6x series needs special care not handled with this patch. Without ONBOARD_VGA_IS_PRIMARY the onboard GPU would be deactivated in case a dedicated GPU is found and active, leaving the system without a working display. Change-Id: I94d1700e9afb75de83a4f2ed1ff53ba3b0559ae1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14031 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2016-03-15google/oak: add table for 4GB configurationPH Hsu
BRANCH=none BUG=chrome-os-partner:49229 BUG=chrome-os-partner:50806 TEST=power on to kernel on Oak Rev3 with 4GB dram Change-Id: I32fa881df12eb9b7f66086904aebde3dd1483fbf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 94c8b7ad911c93c4325113e7afc009f2f81d2275 Original-Change-Id: Ia3640882a46e695550e679dc70611855b64a560f Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/331811 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14089 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15mediatek/mt8173: Enable 4GB modePH Hsu
If the system is using 4GB of memory, enable 4GB mode in the memory controller. Change-Id: I4d0f8ad8d43ff45dd786f4244b11c0879d2088cd Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 94c8b7ad911c93c4325113e7afc009f2f81d2275 Original-Change-Id: Ia3640882a46e695550e679dc70611855b64a560f Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/331811 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14088 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15google/oak: Remove EC_SUSPEND_L from APKoro Chen
This pin is not used anymore since Rev5. BRANCH=none BUG=chrome-os-partner:49375 TEST=make and boot on Rev4/5 Change-Id: I3c775eb2b5e05256523bfd8be814e516944a2f90 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a87e3babe28413bd879a2d95d4612a5b6b541419 Original-Change-Id: I87972ff8961309ecdad03639e1b6fac1da119cd7 Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/331810 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14087 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15x86: Drop CONFIG_COMPILE_IN_DSDTStefan Reinauer
This option is no longer needed, as FMAP support has been fully integrated in coreboot Change-Id: I6121b31bf946532717ba15e12f5c63d2baa95ab2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14078 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-15vendorcode/intel/Kconfig: Add broadwell_de symbol to fix lintMartin Roth
The Kconfig lint tool is complaining because this symbol doesn't exist. Create a temporary definition that can be removed when the chipset is added. Change-Id: I6a8abffcc91773aae16721ee1f48c4c64bd6b486 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14091 Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-14vendorcode/intel/fsp1_0: Add Broadwell-DE SoC vendor codeYork Yang
Initial vendor codes to support Broadwell-DE SoC. This is FSP 1.0 based project and is based on Broadwell-DE Gold release. Change has been verified on Intel Camelback Mountain CRB. Change-Id: I9262c9d70a58f0c7427f0658948adf080f2f6d8f Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: https://review.coreboot.org/14030 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-14intel/fsp_baytrail: Enable LPSS in ACPI modeBen Gardner
This change fixes LPSS ACPI mode. Previously, enabling ACPI mode would result in unusable devices, as the resources were set to 0 and the devices were disabled. lpss.c was copied from intel/baytrail with a few minor adjustment for the different config structure. ACPI mode requires setting PcdLpssSioEnablePciMode==LPSS_PCI_MODE_DISABLE and applying the patch that disables clearing gnvs. https://review.coreboot.org/#/c/14040/ This doesn't handle the case where the FSP has PcdLpssSioEnablePciMode set to disable and the devicetree set to default. Change-Id: I12fffea3820ed948defe7a4f11af6b6363402560 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14042 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-14intel/fsp1.1: Mark graphics init done after SiliconInit phaseDuncan Laurie
If the VBT was provided to the FSP GOP driver then graphics init will be done as part of SiliconInit step and we can mark that when it is completed. This will result in the "oprom" flag being set properly in the coreboot gpio table and the netboot firmware will have video. [pg: avoided conflict with Quark that comes without silicon_init_params.GraphicsConfigPtr] BUG=chrome-os-partner:50864 BRANCH=glados TEST=boot image.net.bin on chell and get working graphics without being setuck in a reboot loop thinking graphics needs to be started when it already has been. Change-Id: I0e481b4be57096ed5c60d78e3fa00f3bb2a4eae1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 089d93c712431d1b5923e844137c558994555e95 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331301 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-(cherry picked from commit eeb9d470d8118422feb39ca71106972f2882e240) Original-Change-Id: Ic59bad27eb9f184ca3eba24643851bfadfe23ab5 Original-Reviewed-on: https://chromium-review.googlesource.com/331355 Reviewed-on: https://review.coreboot.org/13986 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-03-13nb/amd/mct_ddr3: Use correct initial UI setting during DRAM trainingTimothy Pearson
Rebasing change I3be808db5d15ceec4c36d17582756b01425df09a did not take into account the default UI setting introduced in change I6ae88c891e92b21dc0ca3c47b8f3d269f83b3204 , causing DRAM instability and occassional failure to boot. Use the correct 1UI value for the modified function semantics. Change-Id: I9fd24cf83e4c4083c6e467d49021c98e5f5f2c53 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14073 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13intel/fsp_baytrail: Fix LPE initialization and enable ACPI modeBen Gardner
This change properly assigns resources to the LPE (Low Power Engine for Audio) and enables ACPI mode. lpe.c was copied from intel/baytrail with a few minor adjustment for the different config structure. ACPI mode requires setting LpeAcpiModeEnable=LPE_ACPI_MODE_ENABLED and applying the patch that disables clearing gnvs. https://review.coreboot.org/#/c/14040/ Change-Id: I3fff9aa158bde88e571082642d4f985a5ae1976e Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14041 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13intel/fsp_baytrail: Don't clear gnvs in acpi_init_gnvs()Ben Gardner
That wipes out all previously stored settings and breaks running devices in ACPI mode. This more closely matches what is done in intel/baytrail. Change-Id: Ie993c9f9e1eceb73d016d2df72770a27abb26ec1 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14040 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13northbridge/intel/i3100: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i3100 boards in the chipset. Change-Id: Ia66a0561c75777a9e98bb87117859808a2ff3732 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13786 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13northbridge/intel/i82810: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i810 boards in the chipset. Change-Id: Ifda7dcfdf37b6affce838ee96ca6382b2d4be8c3 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13784 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12northbridge/intel/i82830: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i830 boards in the chipset. Change-Id: I0a63ddd3c5e43ea65f776385f54eceb6569751ac Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13783 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12nb/amd/mct_ddr3: Consolidate duplicated codeTimothy Pearson
read_dqs_read_data_timing_registers() and read_read_dqs_timing_control_registers() served essentially the same function but had slightly different semantics, causing confusion and needlessly complex Family15h code. Consolidate both into read_dqs_read_data_timing_registers() and adjust surrounding code to match new semantics. Change-Id: I3be808db5d15ceec4c36d17582756b01425df09a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13994 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12intel/skylake: Do not log wake source on resetDuncan Laurie
Skip logging a wake source when just resetting without coming from S3 or S5 state. This will prevent the occasional spurious event like PCI PME from showing up in the event log. BUG=chrome-os-partner:40635 BRANCH=glados TEST=run warm reboot teset on chell and ensure no wake source is logged Change-Id: If739034dc9022b37c90b9cc849a00c604383e70f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e7b5cc91adc3ed10df7cebd758cf8144216b9890 Original-Change-Id: I16f4f98df8c70fd25986a8b3644334c7209fd083 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/329846 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331173 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13991 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12intel/kunimitsu: Add SD card detect GPIO for SDHCI runtime PMmgarima
Enable SDHCI runtime PM since the display flicker due to SCC Power Gatingis addressed by 0x82 microcode BRANCH=glados BUG=chrome-os-partner:44663 TEST=Check if display flicker is gone when SCC is power-gated Change-Id: I7d1ac6e77a0d2e0a25414df6130862efcdae2c82 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b552120cfeff09d16cb79652b7de7296121858ba Original-Change-Id: Id82df475b262e8a91f0a93f8ddf80002b05c52f3 Original-Signed-off-by: Medha Garima <medha.garima@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329651 Original-Commit-Ready: Jenny Tc <jenny.tc@intel.com> Original-Tested-by: Jenny Tc <jenny.tc@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331172 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13990 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12soc/intel/skylake: add option to statically clock gate 8254 timerAaron Durbin
In order to save more power by shutting down clocks add the ability to optionally clock gate the 8254 programmable interrupt timer. When doing this the platforms lose their "PC"-ness which certain payloads and OSes rely on such as SeaBIOS. BUG=chrome-os-partner:50214 BRANCH=glados TEST=Enabled option on chell. Noted the bit is set upon booting. Change-Id: I01f9d177bbde417d1efec2e16656a07dcebccbde Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 662575aa6a63656dedfa0ce1f202f5fac0205477 Original-Change-Id: Ib4a613cf1c28fc96c36fa2987c4b58a05beab178 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/329411 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331171 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13985 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12glados/chell: send an extra VR mailbox commandRizwan Qureshi
MPS IMVP8 VR is not entering PS4 in S0ix on Glados/Chell. The pcode has been updated since v76, and it requires an an extra VR mailbox command should be sent from coreboot to pcode. BUG=chrome-os-partner:48511 BRANCH=None TEST=Verified on glados, clean S0ix entry and exit. IMVP8 power is also pretty low CQ-DEPEND=CL:329393 Change-Id: Ia3ef4031269ac2d4557bba65de34c41a8d73f89a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3e66903c9017f9d3f45c97b68284f4e1058c03e2 Original-Change-Id: Ie9e370556bb35d02f6bfcfe5cb81dd977fceace1 Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329480 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13983 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12soc/intel/skylake: add option to enable VR specific mailbox cmdRizwan Qureshi
Adding an option to enable VR specific mailbox command. When set, an extra VR mailbox command specifically for the MPS IMPV8 VR will be sent. BUG=chrome-os-partner:48511 BRANCH=None TEST=Verified on glados, clean S0ix entry and exit. IMVP8 power is also pretty low Change-Id: Ia5a23cbb1eca8b463eb7c7c279b74635f1d6b9f7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c90a799b51fe35bf184dca6ffce59c89a60f9917 Original-Change-Id: Iffd3fbcb9a15611eefc942529e6cdafba859fb2e Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329393 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13982 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12vendorcode/intel/fsp/fsp1_1/skylake: update FspUpdVpd.h 1.9.0Aaron Durbin
The previous copy of FspUpdVpd.h was not up to date w.r.t. the FSP release being used for skylake boards. Fix that. BUG=chrome-os-partner:50863 BRANCH=None TEST=Built and booted on chell. Change-Id: I39896c04d35189b0fb2c903eefda4e5b7c57084a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fd647f354b8d9946b2217751cf1af845f29191b7 Original-Change-Id: I4ad131af6c563c9c33eb2b9207b13617ff24385d Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331290 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13984 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12mediatek/mt8173: memlayout: Create DRAM DMA region for NOR flash DMA read.Yidi Lin
NOR flash has a hardware limitation that it can't access SRAM region after 4GB mode is enabled. We add a DRAM DMA region after 0x40000000 for NOR flash driver. So that the NOR flash driver can use this region after 4GB mode is enabled. BRANCH=none BUG=chormoe-os-partner:49229 TEST=Boot to kernel on rev4 w/ 2GB ram and rev3 w/ 4GB ram. And check /proc/meminfo. Change-Id: I4a86f0028b26509589ec8d09e2d077920446ece1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: dc61ec55187959101a9e891fe5e93928e9b8176e Original-Change-Id: Ifedc9e2dfba5d294297b3a28134997ac1dd38f94 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/327962 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331177 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13989 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: detect sdram size at runtimeYidi Lin
Remove DRAM_SIZE_MB Kconfig setting and use sdram_size_mb() to detect the DRAM size at runtime. BUG=chrome-os-partner:49427 BRANCH=none TEST=Boot to kernel Change-Id: I0c3245db73335fb4f1c89c1debde715fc96ecba7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 00f6f2bbed0e7d23181337b9274191b31e73e223 Original-Change-Id: I409163fe527e966c184f28d7d9bbc809ae2308ed Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com> Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/327961 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331176 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13988 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: mmu: update mmu range before DRAM is initialized.Yidi Lin
The DRAM size can not be determined before DRAM is initialized. Since mt8173 only support 2GB and 4GB DRAM models. We map 0x0 to the end of 2GB DRAM address before DRAM is initialized. BRANCH=none BUG=none TEST=boot to kernel Change-Id: I27a00106b0aa91c3dacfcd2bcd9208f08b108dc5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9720e67c86f0d37a08f7c32e900996c75d60288a Original-Change-Id: I87d9c6ac11486decde102b7821f550c2f1a51f1c Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/327960 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331175 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13987 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12Add a driver for the parade ps8640Jitao Shi
BRANCH=none BUG=none TEST=none Change-Id: Icf397ce2ffdaed5048367daf2086c067984fea0a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b5a88793ccfc46af196300791a300be67b70f5b1 Original-Change-Id: I75adf2688c9c8b9a2338f7dee5d0ac10e7181529 Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/321056 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13981 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: pll: raising the CPU core frequencyYidi Lin
Runs the LITTLE core at highest freqency to speed up the boot time. Set Vproc to 1.125V and set the freqency to 1.6Ghz for backward compatibility. (The highest frequency for the IC before E3 is 1.6Ghz.) BRANCH=none BUG=chrome-os-partner:47422 TEST=flash the bootloader and measure the boottime by cbmem result Change-Id: Id0b906bf34ac534667eb6e8f576e30942ceb923e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5fc38548d158158f07cded8cfc8ea5a0a7952161 Original-Change-Id: I62af26c13d98211974243100c581abcb5408fd63 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/324685 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13980 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 11:13:52 +0000