| Age | Commit message (Collapse) | Author |
|---|
|
Add TDP and Power Limit settings for ADL-S 8+8 150W, 4+0 and 2+0.
The System Agent PCI IDs were not present in older 2.1 revision of
DOC #619501. Now that the mapping of these IDs to SKUs is known, fill
the missing TDPs and Power Limit settings based on DOC #626343.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I23dd8478e60bcc81a1048f2f6e6717dd281d1a69
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Add missing System Agent PCI IDs for ADL-S 4+0 and 2+0 to configure
VccIn Aux Imon IccMax. They were not present in older 2.1 revision of
DOC #619501. Based on DOC #619501 rev 2.6.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Idfd57ce9b63db5d5fcc9d4efb8aa27ed7cc6222d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Based on DOC #619501, #634885, #626343.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ib50db521e4d127a773f903b45d4bec5c5cc180d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
The patch updates platform_is_resuming() API such that platform resume
state is determined from the saved state (CBMEM) instead of checking PMC
registers (PM1_STS & PM1_CNT) as they are getting cleared (before/early)
ramstage.
coreboot sends DISCONNECT IPC command which times out during resume (S3)
if system has servoV4 connected on port0. The issue occurs only during
the first cycle of resume (S3) test cycle after cold boot due to side
effect of platform_is_resuming() API that is not determining the resume
(S3) state correctly in ramstage.
PM1_STS and PM1_CNT register gets cleared at the start of ramstage.
platform_is_resuming() function was checks the cleared register value
and fails the condition of resume (S3) resulting in sending DISCONNECT
IPC command. Checking the platform resume state from the CBMEM saved
state using acpe_get_sleep_type() function helps cross verify the
system previous state at the later part of ramstage.
localhost ~ # cbmem -c | grep ERROR
[ERROR] EC returned error result code 3
[ERROR] PMC IPC timeout after 1000 ms
[ERROR] PMC IPC command 0x200a7 failed
[ERROR] pmc_send_ipc_cmd failed
[ERROR] Failed to setup port:0 to initial state
[ERROR] PMC IPC timeout after 1000 ms
[ERROR] PMC IPC command 0x200a7 failed
[ERROR] pmc_send_ipc_cmd failed
[ERROR] Failed to setup port:1 to initial state
[ERROR] GENERIC: 0.0 missing read_resources
[ERROR] PMC IPC timeout after 1000 ms
[ERROR] PMC IPC command 0xd0 failed
[ERROR] PMC: Failed sending PCI Enumeration Done Command
BUG=b:227289581
TEST=Verified system boots to OS and verified below tests on
Redrix (ADL-P) and Nivviks (ADL-N)
1. coreboot doesn't send the DISCONNECT during S3 resume
2. suspend S3 passes with both suzyq and servoV4 connected
3. After S3 resume, system detects the pen drive with Superspeed
4. After system resumes from S3, hot-plug the pen drive, system detects
the pen drive
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I353ab49073bc4b5288943e19a75efa04bd809227
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66126
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add weida touchscreen support for drawcia.
BRANCH=dedede
TEST=Build and verify that touchscreen works on drawcia.
Change-Id: Ic76f3529771c6eeeafef7ca50fc400065aac2211
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65471
Reviewed-by: Ivan Chen <yulunchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Replace `LEqual(a, b)` with `a == b`.
Change-Id: I4e219bea8df64db1d49beb8534f0f37fee0df5b6
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Replace `LEqual(a, b)` with `a == b`.
Change-Id: Ifffd21a663739f72a5584e26b79b0627dd532d9e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Replace `LEqual(a, b)` with `a == b`.
Change-Id: I3aebd29bba285229979b79867c881018f61e2060
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I0ae8c6624b79ce6c269244bd1435900d4d7f997a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
set i2c address to 0x14 for Goodix touchscreen
BUG=b:239180430
TEST=USE="project_joxer emerge-nissa coreboot"
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I11a2d9c684bc511b3942f88f74a2495e796bc3c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
When the dGPU is entering GCOFF, the link should first be placed into
L2/L3 as appropriate for the design, then when exiting, the link should
be placed back into L0. This patch fixes that oversight.
BUG=b:239719056
TEST=build
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ia3bdfe5641216675e06ebe82ffe58bf8c049b26b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The EEs noticed this pin was misbehaving; it was accidentally set to a
low output, but should be open-drain (NC). This patch fixes that.
BUG=b:237837108
TEST=verified by EEs
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ie76a951320c49b9fbc1f23b96f04c9f86ad44d42
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
For some yet unknown reason, when this GPIO is locked, there is an
interrupt storm for IRQ #9 apparently caused by GPE 0x66. GPP_F14 is set
to GPE 0x64 on the ADL platform, so this doesn't quite make sense. This
patch removes the lock and fixes this IRQ storm, but the root cause is
not identified yet.
BUG=b:236997604
TEST=`grep ' 9:' /proc/interrupts` shows a reasonable value now
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I3d1c66fac80a173798ae33e48b1776d9f4fb5eaa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
After staring at lots of scope shots, the EE has determined that a few
modifications to the GCOFF sequence can be made:
- Remove delay between PERST# assertion and GPU_ALLRAILS_PG deassertion
- Remove delay after ramping down FBVDD
This patch implements these minor changes.
BUG=b:240199017
TEST=verified by EE
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I7d492b3e65a231bc5f64fe9c3add60b5e72eb072
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66199
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
After some debugging, it has been determined that the ASPM L0s substate
is functional, but there is still some problem with ASPM L1 substates,
so this patch updates ASPM status for the dGPU from disabled to L0s
only.
BUG=b:240390998
TEST=tested with nvidia tools
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I584bdbf26eda20246034263446492bf4daf5f3b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66198
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
There are 3 more CPU PCIe RP UPDs that are the current code is not setting,
and some boards may want to set these, so this patch adds support to set
these UPDs. The default values for any existing boards using these UPDs
should not change with this patch.
The UPDs are:
- CpuPcieRpDetectTimeoutMs
- CpuPcieRpAspm
- CpuPcieRpSlotImplemented
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Id48019f984e8e53ff3ce0c3c23e02dab65112c99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66197
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Generate SPD id for hynix H54G68CYRBX248
BUG=b:239899929
BRANCH=firmware-brya-14505.B
TEST=run part_id_gen to generate SPD id
Change-Id: I96babe340678ca9b82b06d3193b93a7676f23fef
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Generate SPD id for Hynix H54G68CYRBX248
BUG=b:239888704
BRANCH=firmware-brya-14505.B
TEST=run part_id_gen to generate SPD id
Change-Id: I9412b988bcdb0c744e016f3add6dacda8185d6db
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
GPP_F0 to GPP_F4 is for CNVi and should be NF1.
GPP_F5 is for CNVi CLK_REQ, and should be NF3 CRF_XTAL_CLKREQ.
BUG=b:240006200
BRANCH=firmware-brya-14505.B
TEST=CNVi wifi can get probed in kernel.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ice3fde3a457f6f5c058c0a7d3ca2e63775bda96c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
|
|
Add SLP_S0 residency register and enable LPIT support.
Change-Id: I45e1fc9df3e782cdaac810af3189c5797b1fe413
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The current "normal" EPB (six) setting resulted in the desired out of
box power and performance for several CPU generations.
However, a power and performance analysis on Alder Lake and Raptor
Lake CPUs demonstrates that this value results in undesirable higher
uncore power and that seven is a more appropriate value.
Note: the Linux kernel "4ecc933b x86: intel_epb: Allow model specific
normal EPB value" patch sets the EPB to 7 for Alder Lake.
BRANCH=firmware-brya-14505.B
BUG=b:239853069
TEST=verify that EPB is set by coreboot
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I5784656903d4c58bedc5063ee3ef310a99711050
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66059
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to document 619503 ADL EDS Vol2, bit 18 of MSR_POWER_CTL
must be set to be able to set the Energy/Performance Bias using MSR
IA32_ENERGY_PERF_BIAS.
Note that since this bit was not set until this patch, the
`set_energy_perf_bias(ENERGY_POLICY_NORMAL);' call in
`soc_core_init()` was systematically failing.
BRANCH=firmware-brya-14505.B
BUG=b:239853069
TEST=verify that EPB is set by coreboot
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: Ic24abdd7f63f4707b8996da4755a26be148efe4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch adds a new variant called Pazquel360 \
that is identical to Pazquel for now.
BUG=b:239987191
TEST=make
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: I0a9ca4a59fb44256d0d8fcdbdf2a7db533c84412
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Bob Moragues <moragues@google.com>
|
|
The concise multi-line comment style is for inside function bodies to
save space. Outside of it, use non-concise style.
Change-Id: I34d9ec6984b598a37c438fa3c395b5478207e31d
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This adds the initial gpio configuration for the rex initial variant.
BUG=b:238165977
TEST=Boots and no errors on simics
Change-Id: I55ab31c7943e22df9cec8db4a9f0c3ab6f065ae1
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65952
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch fixes the documentation discrepancy of GPIO reset type
between PCH EDS and GPIO BWG.
As per GPIO BWG, there are four GPIO reset types in Meteor Lake as
below:
- Power Good - (Value 00)
- Deep - (Value 01)
- Host Reset/PLTRST - (Value 10)
- Global Reset for GPP - (Value 11)
Also, dropped the need for having dedicated reset type for GPIO
community 3. As per the MTL EDS, all GPIO communities have the same
reset type.
BUG=b:213293047
TEST=Able to build and boot Google/Rex without below error msg.
[ERROR] gpio_pad_reset_config_override: Logical to Chipset mapping
not found
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Id7ea16d89b6f01b00a7b7c52945f6e01e8db6cbd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66155
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Will Kim <norwayforest92@gmail.com>
|
|
This patch introduces a new macro for GPP PAD reset type as
`Global Reset` as documented in Alder Lake EDS doc 630603.
BUG=b:213293047
TEST=Able to build Google/Kano with this change.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I39428911babc393dd10750801522a00d0b26d3e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66154
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Enabling them causes firmware keyblock/preamble and/or body verification
failure. Hence disabling them to use software based verification.
Re-enable them once the issue is root-caused.
BUG=b:217414563
TEST=Build and boot to OS in Skyrim with PSP and x86 verstage.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I7e259ae5d790977d08afcb0a77f8d4f38c85f39e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66134
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently only SHA_GENERIC is used and does not need to be passed.
BUG=b:217414563
TEST=Build and boot to OS in Skyrim with PSP and x86 verstage.
Change-Id: Id705b1361fffaf940c51515e7f77d7fb0677fc4a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66133
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
ChromeOS connection manager (shill) already
has support for dock MAC address passthrough, therefore remove the
code to pass a dock's MAC address in ACPI.
BUG=b:235045188
TEST=build coreboot
Signed-off-by: Franklin Lin <franklin_lin@wistron.corp-partner.google.com>
Change-Id: I78320a7c6b0fd5392e24b63bff234229a3f4b9bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66040
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow latest schematic 6/27 to update the DQ map.
BUG=b:240006200
BRANCH=firmware-brya-14505.B
TEST=build passed.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I8d0de04a001cab53a245185707ebc9da7a501ec4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66122
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
wifi
This reverts commit 5e6fd360de7fe92f1e8b1b3eb20241809e2a6aff.
On nereid, the SSDT entry for the PCIe wifi device is missing, causing
wake-on-WLAN not to work since the _PRW is missing.
It seems like when commit 5e6fd360de changed the SSDT generation logic
for CNVi and PCIe wifi, it broke the PCIe case. `wifi_pcie_ops` are
never assigned to any device, so
`parent && parent->ops == &wifi_pcie_ops` always returns false, and the
`wifi_cnvi_ops` are used even for PCIe devices.
Undo the changes in that CL. This allows both the CNVi and PCIe cases to
work. That CL was meant to fix an issue with the CNVi _PRW containing
garbage, but I can't reproduce this when the change is undone.
It was also meant to fix the following error on CNVi devices, but I
don't see any errors with this change:
[ERROR] NONE missing set_resources
BUB=b:233325709
TEST=On both nivviks (CNVi) and nereid (PCIe), check that the SSDT
contains the correct wifi device entries (below), including a _PRW
containing the correct GPE, and check that wake-on-WLAN works.
nivviks:
```
Scope (\_SB.PCI0.CNVW)
{
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x6D,
0x03
})
Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
{
<snip>
}
}
```
nereid:
```
Device (\_SB.PCI0.RP01.WF00)
{
Name (_UID, 0x923ACF1C) // _UID: Unique ID
Name (_DDN, "WIFI Device") // _DDN: DOS Device Name
Name (_ADR, 0x0000000000000000) // _ADR: Address
}
Scope (\_SB.PCI0.RP01.WF00)
{
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x23,
0x03
})
Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
{
<snip>
}
}
```
Fixes: 5e6fd360de ("drivers/wifi/generic: Fix properties in generic-under-PCI device case")
Change-Id: I100c5ee3842997c50444e5ce68d583834ed3a8ad
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66063
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add critical, passive policy, and pl values from thermal team.
BUG=b:239495499
TEST=Build and test on MB, system can boot to OS.
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I8beb3b57ff56c6fe413bb0e3dd43d693aee08e36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66125
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Beginning FSP 2.2 specifications Fsps Config Upd "FspEventHandler"
was moved to Fsps Arch Upd. Hence we were not seeing Fsps Debug
log was not using coreboot debug library.
This change assigns Fspd Arch Upd FspEventHandler with coreboot
ramstage debug handler when FSP_USES_CB_DEBUG_EVENT_HANDLER
Kconfig is enabled.
Before:
Dumping FSPS_UPD - Size: 0x00001510
0x00000000: 0x41 0x44 0x4C 0x55 0x50 0x44 0x5F 0x53 0x02 0x00 0x00
0x00000010: 0x00
With the fix:
[SPEW ] Dumping FSPS_UPD - Size: 0x00001528
[SPEW ] 0x00000000: 0x41 0x44 0x4C 0x55 0x50 0x44 0x5F 0x53 0x02
[SPEW ] 0x00000010: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
[SPEW ] 0x00000020: 0x01 0x00 0x00 0x00 0x20 0x00 0x00 0x00 0xAA
[SPEW ] 0x00000030: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
[SPEW ] 0x00000040: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
BUG=b:237263080
TEST=Able to build and boot MTL RVP, verified the FSP-S debug
log is using coreboot debug library.
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Ie63258f6427b3da7927a866bc3767f548b16e3e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66146
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Pujjo support WLAN device, enable PCIe port 4 for WLAN device
BUG=b:239899932
TEST=Build and boot on pujjo
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: Ic8b7240941cf87a4f27963d50fffe28875114a81
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66073
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To avoid unnecessary PCIe early initialization for non-NVMe devices
(which would take about 150ms on dojo), skip setting PCIe ops when
initializing mt8195 SoC.
BUG=b:238850212
TEST=emerge-cherry coreboot
TEST=Dojo SKU1 (eMMC) boot time <= 1s
BRANCH=cherry
Change-Id: I8945890ba422c0c4eb42683935220b7afbb80dfd
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65993
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Implement mainboard_needs_pcie_init() for cherry as a callback for
mt8195 SoC to determine whether to initialize PCIe. When the SKU id is
unknown or unprovisioned (for example at the beginning of the factory
flow), we should still initialize PCIe. Otherwise the devices with NVMe
will fail to boot.
BUG=b:238850212
TEST=emerge-cherry coreboot
BRANCH=cherry
Change-Id: I2ed0ceeb37d2924ca16485fb2d130959a7eff102
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
1. Set Type-A USB3 port0/1 tx_de_emp to 0x2B to fix the USB3 Gen2 RX
signal integrity issue.
2. Disable unused USB port.
BUG=b:238230292
TEST=build FW and check Type-A USB3 port0/port1 RX pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I8356ca30a965e5774a1556c5cb81e1586c55496c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Joxer will have both eMMC and UFS SKUs, which require different
settings in the descriptor. So update the descriptor at run-time based
on fw_config.
By default, the descriptor is configured for UFS. This configuration
still boots fine on eMMC SKUs, it just might cause problems with S0ix.
This is a temporary workaround. It will be removed once we've
implemented a proper solution for configuring the descriptor differently
for different SKUs.
BUG=b:238234376
TEST=Make an identical change for nivviks. On both nivviks (eMMC) and
nirwen (UFS), check that it boots and that the logs show the descriptor
being configured as expected.
Change-Id: I14232eb773936f2ecd183687208d332136935601
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
SSPM is "Secure System Power Manager" that provides power control in
secure domain. The initialization flow is to load SSPM firmware to
its SRAM space and then enable.
It takes 21 ms to load sspm.bin.
coreboot logs:
CBFS: Found 'sspm.bin' @0x21680 size 0xa815 in mcache @0xffffeac4
mtk_init_mcu: Loaded (and reset) sspm.bin in 21 msecs (137348 bytes)
TEST=we can see the sspm logs.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ib6443b64734048c1d71eeac650f36d7c4ac709cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Load MCUPM firmware and boot up MCUPM in ramstage.
It takes 41 ms to load mcupm.bin.
coreboot logs:
CBFS: Found 'mcupm.bin' @0x12580 size 0xf0c6 in mcache @0xffffead0
mtk_init_mcu: Loaded (and reset) mcupm.bin in 41 msecs (122184 bytes)
TEST=we can see the mcupm logs after reset releases.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Id1e62d9d6ede1c453e03eeda0d9b16fafa9e2372
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Set GPE route as
GPE0_DW0 -> GPP_A
GPE0_DW1 -> GPP_E
GPE0_DW2 -> GPP_F
BUG=b:224325352
TEST=Verified in emulator that there is no regression
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I5e3e09cfc06d2556ea32cca23b3dae114a510498
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This reverts commit b57d172fbb5265d632c031532fcc2aec156e065a.
Reason for revert: Results into hard hang with serial debug msg as
below:
`[EMERG] Unable to unhide the P2SB device!`
Intel team is working towards to fix this issue.
BUG=b:239806774
TEST=Able to boot the Intel/MTLRVP with this revert.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic6be37c000afdf4f0c6c22497c233aa0bbc49d48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65500
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch overrides `Lp5CccConfig` UPD as per the CCC mapping data
captured from the Rex schematics dated 07/16.
BUG=b:224325352
TEST=Able to build Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia1d9e3665cff74a803e730c76f62773996efb3dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66049
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set the SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_PCR config on Meteor Lake
to instruct Pad Configuration Lock.
BUG=b:211573253, b:211950520, b:213596994
TEST=Able to perform GPIO lock programming without error on MTLRVP.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Icd123adb02716149fa51c9e4c987c281f9de2f43
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Add the required files to support VBOOT for when it is enabled.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I083107b21c23f42193fc88aa174ec22850f45bc8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65705
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The X2APIC_LATE_WORKAROUND kconfig allows bringing APs in XAPIC mode initially hence, it won't work if LAPIC ID is > 0xff.
This patch ensures the MAX_CPUS logic is appropriate while selecting X2APIC_LATE_WORKAROUND kconfig from SoC.
BUG=b:219061518, b:219053812
TEST=Able to build Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I466e6cc568024a9dea80af21e0ebf3572e74a1f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add pujjo new supported memory parts in mem_parts_used.txt.
Generate SPD id for this part.
Micron MT62F1G32D4DR-031 WT:B
BUG=b:239776504
TEST=Use part_id_gen to generate related settings
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I95eb194ecbd5d39f66eb566132e75af056899325
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66039
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This patch updates the GPIO lock configuration recommendation
kconfig string to ensure the SoC user can select the correct
config as applicable for the SoC.
Note: From MTL onwards GPIO lock config can be performed using
PCR write (MMIO write) and the GPIO team has confirmed this.
BUG=b:213596994
TEST=Able to fix below GPIO lock config error msg on MTL with
`SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_PCR` kconfig enabled.
[INFO ] Locking pad configuration using SBI
[INFO ] gpio_pad_config_lock_using_sbi: Locking pad 73
configuration
[ERROR] SBI Failure: Transaction Status = 1
[ERROR] Failed to lock GPIO PAD, response = 1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Icab1e4849b8e08ee1c695c924599f1513774178f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch reads various memory configuration GPIOs to fill in below
details:
1. variant_memory_sku()
2. variant_is_half_populated()
BUG=b:224325352
TEST=Able to build Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I23bad8c78523cb56008e6d67e7776e57e42fbeb9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This patch ensures the debug consent value is matching with the
inline comment.
TEST=Able to build the Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Icf72eb2aa4064fd78f4f99570a4cf44e41932ec3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66008
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Lots of code from lenovo/haswell can be reused for lenovo/w541. Thus,
integrate it into lenovo/haswell and make it a variant.
Change-Id: If99d842cff777fe27ff63baabc447e69b9d0333c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
In preparation to CB:63514, make the INT15 support specific for the
T440p variant since the W541 doesn't support it currently.
Change-Id: I8dfcc061e1b8a831f75bf9a8035770cb678a85d4
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66106
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I36091118d98f71dc4141aca4e45858a22d519a9b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
TEST=Build mtlrvp and check IPU0 ACPI ojbect from ssdt
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ib5c3d455d272af0e753c775a5fd3f19851b7937d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66056
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds more GBB related configs. Select
`HAS_RECOVERY_MRC_CACHE` config.
Additionally, move VBOOT_LID_SWITCH config under VBOOT config.
TEST=Able to build the Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I28976200cbd70dc23f58868ee89c0ac700793be9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66007
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This patch is to denote the correct value of ACPI _PLD for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
C2 | | A0
C0 | MLB DB | C1
| |
+----------------+
BUG=b:216490477
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot
Change-Id: I96202b9ac9586975e960d6577d279c995c67f34e
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66031
Reviewed-by: Won Chung <wonchung@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Hide these ACPI device so Windows does not warn about missing device
drivers.
Change-Id: Iba6cf7a17eefc9f4f247621f6625151f2fd5f3a7
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66054
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I49185352002f6df2f9e9ab9c39d44cc9247b41b5
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I6b3fe8f4acbb5a2f9fca605e07854ebcc3f2a065
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I11f2ebb94b0e9a3e2c18c5b2071ccc3e03c16655
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Set the default value for MAX_CPUS in the SoC config and drop it from
the mainboards where it is set to those values.
Change-Id: Ib56fdcfe770ef736a2c5e183481d9f9966570e6d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add two memory parts and generate the associated DRAM part ID.
1) Hynix H9JCNNNBK3MLYR-N6E
2) Hynix H58G56AK6BX069
BUG=b:228415394
TEST=none
Change-Id: I0f5ca291e02e209032e2533f4b2d4241b5e62e42
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66062
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Use fw_config Bit 0 and Bit 1 to control:
Bit 0 = 0 --> enable WFC
Bit 0 = 1 --> disable WFC
Bit 1 = 0 --> enable pen garage wake
Bit 1 = 1 --> disable pen garage wake
BUG=b:238045498
TEST=emerge-nissa coreboot chromeos-bootimage
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I85bc4753bfd16fd460286aa2b3bb5f3341049f61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If8af4657508f00feff8525b0135c7f73c1959965
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Remove the sections that coreboot doesn't need to know about.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ide6c0d44f1f9ad9b962d2b8e14ac91e87f5ca031
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65453
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reserve bits 15 and 16 in the fw_config to be used to specify WFC
population status.
Possible values for field WFC bits include:
option WFC_ABSENT 0
option_WFC_MIPI_OVTI5675 1
option WFC_MIPI_OVTI8856 2
BUG=b:239613517
BRANCH=firmware-brya-14505.B
TEST='emerge-brya coreboot' and make sure it compiles successfully.
Change-Id: If797b79f0d094816eeb3df7bfded06e92e4e6a32
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add TPM device for Rex.
Device details:
I2C Controller/Bus = 4
I2C Slave Address = 0x50
GPE = GPE0_DW1_03/GPP_E03
BUG=b:224325352
TEST=Verified in emulator that there is no regression
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ifa3a5b503a203e3900049f27a54025156e22a285
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66014
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 58f68fb0cb8e9824256a115d1ebdc840c281e987.
Reason for revert: ODM thermal team request that change IA/GT TDC
current back to 20A.
BUG=b:237230877
TEST=Build and boot to Chrome OS
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I6a5cfdc18afb6fe43a3d630e5fa3d77c19640fc2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65980
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Baieswara Reddy Sagili <baieswara.reddy.sagili@intel.corp-partner.google.com>
Reviewed-by: Vinay Kumar <vinay.kumar@intel.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
|
|
Enables the EC_GOOGLE_CHROMEEC_BOARDID feature so we can read
board_id() on rex.
TEST=Verified builds succeed and code is linked
Change-Id: Id202019519fc4a05c80374bc97663e59fdca3d76
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66018
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Geralt reference design has both eMMC and SD card interfaces, so we
configure both in mainboard_init() in ramstage.
TEST=boot to kernel using emmc successfully.
BUG=b:236331724
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.corp-partner.google.com>
Change-Id: I200a065ab96584d824153480e594e19baae97f9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65976
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Geralt reference design has both eMMC and SD card interfaces, so we have
to configure both in ramstage.
Implement msdc.c (mass storage device class) to place the eMMC and SD
card drivers.
This implementation is based on chapter 5.9 in MT8188 Functional
Specification.
TEST=boot to kernel using emmc successfully.
BUG=b:236331724
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.corp-partner.google.com>
Change-Id: I6594c8466a133d3fdb0084716acca8dcf785f94f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65975
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Control regulator more easily with regulator interface.
TEST=measure 3.0V in VMCH and VMC.
BUG=b:236331724
Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com>
Change-Id: I9727475774b3b9a8dcd49e5e60e133f9d745b407
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65875
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We plan to make 3 firmwares which differ only by Kconfig options and
can share a common variant directory.
ghost4adl: Board with an ADL chip.
ghost4es: Board near identical but has RPL-ES chip.
ghost: Will have final RPL silicon.
Since they will only differ by Kconfig options and Intel binary blobs,
let's not duplicate the variant directory but instead share it in
common.
BUG=b:239456576
BRANCH=firmware-brya-14505.B
TEST="make menuconfig", verify layout of board selection
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I94f2048bbe6675a807f8eba986a1ded0a4167733
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Follow the LED modification request in ADL_Moli_SC_MB_2022_0601.pdf and
set the customized_leds to 0x0482 based on 7.4 Customizable LED Configuration in "REALTEK+RTL8111K-CG+SPEC+0116" for RTL8111K in moli.
BUG=b:218985167
TEST=emerge-brask coreboot and check RTL8111K LED behaviour
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: Ia154d15ecf14b32a4d589abf27b9573693339a8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65958
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reserve bits 15 and 16 in the fw_config to be used to specify WFC
population status.
Possible values for field WFC bits include:
option WFC_ABSENT 0
option_WFC_MIPI_OVTI5675 1
option WFC_MIPI_OVTI8856 2
BUG=b:239613517
BRANCH=firmware-brya-14505.B
TEST='emerge-brya coreboot' and make sure it compiles successfully.
Change-Id: I23bdaf7feaff2e6a4979c3da789ab877e6ac3af2
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
While adequate for ChromeOS, 16MiB VRAM is insufficient for current
mainline Linux and Windows amdgpu drivers to operate properly. Under
Linux, the driver fails to allocate a framebuffer and causes multiple
kernel panics. Under Windows, the driver fails to load due to
insufficient resources available. Revert the VRAM allocation to the
previous amount of 32MiB.
This change reverts
commit 87dcd0061af4 ("mainboard/google/kahlee: Reduce VRAM to 16MB")
Test: build/boot Linux 5.17.x on google/liara, verify framebuffer
allocation succeeds and no kernel panic reported.
Change-Id: I1967a203fed80456a20af00943eba21bc1c0577b
Signed-off-by: Matt DeVillier (AMD) <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66022
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The full dGPU power-on sequence, when executed from ACPI, is taking
roughly 15ms or so, which puts it close to the maximum of 20ms required
from the Nvidia spec. Changing the polling period to 100 us instead of 1
ms drastically reduces the time required for this sequence, now taking
typically 7 ms or so. This gives a lot more margin during the power on
sequence.
BUG=b:238466724
TEST=Sequence verified by EE on a scope
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I3ba676c5fac983a0c1ad1d60c3863d06ed33fa27
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66020
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Zoglin is like Hoglin, but with a smaller flash size, which requires
us to create a new variant.
BUG=b:239851866
BRANCH=None
TEST=Make sure BOARD_GOOGLE_ZOGLIN builds
Change-Id: Id1401a052061dcfc1d1ee41b88ce4a11fd9f3d01
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Skolas baseboard needs to set BOARD_ROMSIZE_KB_32768, so this change
sets it.
BUG=b:239628052
BRANCH=firmware-brya-14505.B
TEST="emerge-brya coreboot" and verify that the following configs
are set as:
CONFIG_BOARD_ROMSIZE_KB_32768=y
CONFIG_COREBOOT_ROMSIZE_KB_32768=y
CONFIG_COREBOOT_ROMSIZE_KB=32768
CONFIG_ROM_SIZE=0x02000000
Change-Id: I0846b8e69c8b65e010eef9a8f4a88606197cd0c6
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Because 0 and 1 are the only possible values,
1. Change input argument "enable" of mainboard_enable_regulator to bool.
2. Change return value of mainboard_regulator_is_enabled() to bool.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Iae09c5fedf8f7394bfbb677e5aee37ed061304fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65997
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
From comments of CB:65875, we replace *_vol to *_voltage.
s/mainboard_set_regulator_vol/mainboard_set_regulator_voltage/
s/mainboard_get_regulator_vol/mainboard_get_regulator_voltage/
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Iadf0408e8914d6e32915464f93979978c4634eaf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65994
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
For MT8188, we need to enable and adjust VMCH and VMC to support SD
cards. Therefore, we add VPA and VSIM1 voltage adjustment APIs.
TEST=measure 3.0V in VMCH and VMC.
BUG=b:236331724
Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com>
Change-Id: I03938f9ef17a0bdd615bcbbfc7b59fa5acb8fbfb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65874
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I71cc69c74dd618f441140790af351095ead3f6f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65759
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add PMIF, SPI, SPMI and PMIC init code.
These PMIC settings are used by MediaTek internally. We can find these
registers in "MT6365_PMIC_Data_Sheet_V1.4.pdf" and
"MT6315 datasheet v1.3.pdf". The setting values are provided by MeidaTek
designers.
TEST=build pass
BUG=b:233720142
Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com>
Change-Id: I05a51894b130a59c28d957b64d6401c8bb9cee91
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
We will use the same drivers for checking ulposc in MT8188, so we add a
new function pmif_ulposc_check() to common.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I40136eaeb2c08a97cd65bfb8a81f2f24739d4d51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65841
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Ti50 hasn't implemented version reading yet. To avoid the confusing
error message
Did not recognize Cr50 version format
enable TI50_FIRMWARE_VERSION_NOT_SUPPORTED to make clear that this
feature is not supported.
BUG=b:234533588
TEST=emerge-corsola coreboot
BRANCH=none
Change-Id: I18dd4b5bc05c2af06627275968e49aba048ba05e
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65839
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
This patch moves the early GPIO programming from
`bootblock_mainboard_init` to `bootblock_mainboard_early_init`.
It will help to get the early debug prints as below.
TEST=Without this CL the initial report platform information
was missing as below:
[DEBUG] VBOOT: Loading verstage.
[DEBUG] FMAP: Found "FLASH" version 1.1 at 0x1c04000.
[DEBUG] FMAP: base = 0xfe000000 size = 0x2000000 #areas = 33
[DEBUG] FMAP: area COREBOOT found @ 1c09000 (4157440 bytes)
[INFO ] CBFS: mcache @0xfef84a00 built for 18 files, used 0x414
of 0x2000 bytes
[INFO ] CBFS: Found 'fallback/verstage' @0x24d240 size 0x133d0 in
mcache @0xfef84d50
With this CL the complete bootblock serial msg is coming.
[NOTE ] coreboot-.mtl.po.ww29.5 Fri Jul 15 21:47:36 UTC 2022
bootblock starting (log level: 8)...
[DEBUG] CPU: Genuine Intel(R) 0000 @
[DEBUG] CPU: ID a06a0, MeteorLake A0, ucode: f0270108
[DEBUG] CPU: AES supported, TXT supported, VT supported
[DEBUG] MCH: device id 7d14 (rev 00) is MeteorLake P
[DEBUG] PCH: device id 7e01 (rev 00) is MeteorLake SOC
[DEBUG] IGD: device id 7d55 (rev 00) is MeteorLake-P GT2
[DEBUG] VBOOT: Loading verstage.
[DEBUG] FMAP: Found "FLASH" version 1.1 at 0x1c04000.
[DEBUG] FMAP: base = 0xfe000000 size = 0x2000000 #areas = 33
[DEBUG] FMAP: area COREBOOT found @ 1c09000 (4157440 bytes)
[INFO ] CBFS: mcache @0xfef84a00 built for 18 files, used 0x414
of 0x2000 bytes
[INFO ] CBFS: Found 'fallback/verstage' @0x24d240 size 0x133d0
in mcache @0xfef84d50
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3e092cd749359e54fe518de21671275af4b03062
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65986
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
The generic wifi driver currently contains a lot of intel specific
functionality that results in it not working properly on AMD platforms.
This commit updates the base device tree to use the generic PCIe driver
instead.
BUG=none
TEST=Ran on nipperkin device, dumped SSDT and checked wakeup sources
Change-Id: Iafbc68c1ae33ccc260889f0b39fc5fe8a59d7aca
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65990
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The generic wifi driver currently contains a lot of intel-specific
functionality that interferes with enabling wake-on-lan. This commit
changes the device tree to use the generic PCIe driver which better
supports this functionality.
BUG=b:237682766
TEST=Booted on skyrim device and verified that wake on LAN works
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: I5d15d33fd0a152eb3bf2bfe78e802483a701e750
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65800
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit adds support for `_PRW` in this driver.
BUG=b:237682766
TEST=Built and booted on Skyrim device, dumped SSDT
Change-Id: Ife4ba48994cbf993bc88df8354576336438e4258
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65799
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit adds code to allow the driver to use an ACPI device name
that is set in the device tree.
BUG=b:237682766
TEST=Boot changes on Skyrim device, dumped SSDT
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: Ie40a335e35b8ac83658e67d7cfba0750dd4784ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65798
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This removes unneeded and unused functionality in the driver as part of
an effort to make the driver more generic and useful. The things that
have been removed are: `DmaProperty` and its associated `is_untrusted`
config, `_DSD` generation, and the companion device functionality. This
driver isn't currently used anywhere so there won't be any issues from
removing the above functionality.
BUG=b:237682766
TEST=Built and booted coreboot on Skyrim device
Change-Id: I0abd9148ab66ea9426069102ecc8c2fa77fea98e
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65797
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SPI_RESTRICTED_CMD register is not a PCI configuration register. It
is memory mapped from the SPI bar.
Verified against PPR 55570 rev 3.16, PPR 56569 rev 3.03, and PPR 57243
rev 1.50
TEST=Compile tested only
Change-Id: I7c88aaea9ddac200644bb368be3bd4e9be47fd7b
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63305
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adjust I2C speed for codec, TPM, touchpad.
BUG=b:237691531
TEST=Built and verified adjusted I2C speed < 400KHz
Change-Id: I203d137d61019235ddf38ef74607427db2a7e975
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This makes inspection of linker scripts in the build dir a little
easier.
Change-Id: I509faa4cee2c9f066f4e20f6038349e1165a619a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Prepare platforms for linking romstage code in the bootblock.
Change-Id: Ic20799b4d6e3f62cd05791a2bd275000a12cc83c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Switch x86 uart output from EC to LPSS.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I2756d139a72185ba6a5c6d1079d770ce33afdf71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65985
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:238571507
BRANCH=None
TEST=emerge-herobrine coreboot
Change-Id: Ie596e5c4b72de84d16571043db4291bbd0825c78
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65947
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Bob Moragues <moragues@chromium.org>
|
|
PSP expects PSP L2 directory address relative to the start of the SPI
ROM. Also PSP does not expect BIOS L2 directory address since it is an
entry in PSP L2 directory. Update the configuration such that PSP
verstage passes the right address to PSP.
BUG=b:217414563
TEST=Build Skyrim BIOS image. Ensure that PSP verstage passes the
address as expected by PSP.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I8dc3aa4cb401d16a68da446f83eb9e68ee290fea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
