| Age | Commit message (Collapse) | Author |
|---|
|
Add support for a new "SPI" device type in the devicetree to bind a
device on the SPI bus. Allow device to provide chip select number for
the device as a parameter.
Add spi_bus_operations with operation dev_to_bus which allows SoCs to
define a translation method for converting "struct device" into a unique
SPI bus number.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully.
Change-Id: I86f09516d3cddd619fef23a4659c9e4eadbcf3fa
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18340
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Provide implementation of get_config routine for GSPI controller on
skylake platforms.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully.
Change-Id: I5170076c15d72a7f29acd0989acef5b9149e2ba0
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18338
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Add a new callback to spi_ctrlr structure - get_config - to obtain
configuration of SPI bus from the controller driver. Also, move common
config definitions from acpi_device.h to spi-generic.h
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Change-Id: I412c8c70167d18058a32041c2310bc1c884043ce
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18337
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
HALO SOC
Add CPU, PCH, MCH, IGD, XHCI and UART IDs for SKL/KBL HALO SOC
Change-Id: I6a44d55d1588d2620bd1179ea7dc327922f49fd7
Signed-off-by: Sooi, Li Cheng <li.cheng.sooi@intel.com>
Reviewed-on: https://review.coreboot.org/18028
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This commit makes a basic adjustment for GPIOs, device tree, flash map and
MRC settings. With these basic settings the mainboard boots into
Linux lubuntu 4.8.0-22-generic using SeaBIOS. More adjustments will follow.
Change-Id: Ia920d236814f2e6a9b777dd1e4b4feef0ddf7721
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/18292
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Create the initial Sand variant which refers to the Reef.
Sand is APL board that derives from reference board Reef.
BRANCH=master
BUG=chrome-os-partner:62200
TEST=Build (as initial setup)
Signed-off-by: YH Lin <yueherngl@chromium.org>
Change-Id: Iba8c5653b6176676c759d2b48063f0c0c6cde625
Reviewed-on: https://review.coreboot.org/18324
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
As per BWG, CPU MP Init (loading ucode) should be done prior
to BIOS_RESET_CPL. Hence, pull MP Init to BS_DEV_INIT_CHIPS Entry
(before FSP-S call).
BUG=chrome-os-partner:62438
BRANCH=NONE
TEST=Boot to OS with all threads enabled.
Change-Id: Ia6f83d466fb27e1290da84abe7832dc814b5273a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18287
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The four options are only used in X86:
- BOOTBLOCK_SIMPLE
- BOOTBLOCK_NORMAL
- BOOTBLOCK_SOURCE
- SKIP_MAX_REBOOT_CNT_CLEAR
Move them all into src/arch/x86/Kconfig - this puts them in the chipset
menu instead of general setup.
Verified that this makes no significant changes to any config file.
Change-Id: I2798ef67a8c6aed5afac34322be15fdf0c794059
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17909
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
For boolean types, 'n' is the default default value - it doesn't
NEED to be set. If it IS set, it prevents a later default from
being set. So by removing the 'default n' statements from the
early symbols, they can be overridden other places in the tree.
Verified that this makes no significant changes to any config file.
Change-Id: I1b5b66bd8a3df8154a348b5272c56c88829b3ab4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17908
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The existing default path of PCI0.LPCB is missing the \_SB prefix and prevents Linux from detecting the TPM.
This is assuming that normally the LPCB device is most commonly on \_SB.PCI0.LPCB.
SSDT excerpt without the patch:
"""
DefinitionBlock ("", "SSDT", 2, "CORE ", "COREBOOT", 0x0000002A)
{
External (_SB_.PCI0.GFX0, DeviceObj)
[...]
External (_SB_.PCI0.SATA, DeviceObj)
External (PCI0.LPCB, DeviceObj)
[...]
Scope (PCI0.LPCB)
{
Device (TPM)
[...]
Scope (\_SB.PCI0.GFX0)
{
Method (_DOD, 0, NotSerialized) // _DOD: Display Output Devices
[...]
"""
SSDT excerpt with the patch:
"""
DefinitionBlock ("", "SSDT", 2, "CORE ", "COREBOOT", 0x0000002A)
{
External (_SB_.PCI0.GFX0, DeviceObj)
[...]
External (_SB_.PCI0.LPCB, DeviceObj)
[...]
External (_SB_.PCI0.SATA, DeviceObj)
[...]
Scope (\_SB.PCI0.LPCB)
{
Device (TPM)
[...]
Scope (\_SB.PCI0.GFX0)
{
Method (_DOD, 0, NotSerialized) // _DOD: Display Output Devices
[...]
"""
After the patch the TPM shows up in /sys/bus/acpi/devices/PNP0C31:00.
Previously it was missing and not detected by the kernel.
Change-Id: I615b4873ca829a859211403c84234d43d60f2243
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: https://review.coreboot.org/18315
Tested-by: build bot (Jenkins)
Reviewed-by: Nicola Corna <nicola@corna.info>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This reverts commit 32997fb0bcb9f4183789331a91fd83138776b96f.
This change is breaking I2S audio on Kabylake platforms so
revert the change to fix audio.
BUG=chrome-os-partner:61548,chrome-os-partner:61009
TEST=manual testing on Eve P1 system
Change-Id: I3212c8be83078ed57e38501386605e67b87d5bd0
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18360
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change touchpad HID to use with the Google Centroiding Touchpad driver.
BUG=chrome-os-partner:61088
TEST=`emerge-eve coreboot`
Change-Id: I199ff46f1a93d3eccc8c694742585dcf37b2373f
Signed-off-by: Wei-Ning Huang <wnhuang@google.com>
Reviewed-on: https://review.coreboot.org/18359
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Some variants need the internal pull resistor on GPIO_SSUS_40
set explicitly to pull down rather than disabling the pull,
in order for the ram-id to be read correctly via GPIO.
Correct this by adding a function to enable and set the internal pull
and define its use as needed in the board's variant.h.
Chromium source:
branch: firmware-gnawty-5216.239.B
/src/soc/intel/baytrail/baytrail/gpio.h#418
/src/mainboard/google/gnawty/romstage.c#60
Test: boot 4GB Candy board and observe correct RAM id, amount detected
Change-Id: I8823c27385f4422184b5afa57f6048f7ff2a25ab
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/18309
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Those are the result from tracing what linux or the option rom do
but are not needed here.
TESTED on Thinkpad X60.
Change-Id: I4297a78c4ab6a19ef6161778c993fc3f3fb08c7e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18294
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I3395e274e0ba43de7e7306daedeb26c75de65ee1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18327
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Poppy doesn't support 8042 keyboard. Select
NO_FADT_8042 to disable 8042 in FADT header.
Kernel will not try to access 8042 region
if 8042.FADT=0
BUG=chrome-os-partner:61858
TEST=Boot OS and verify FADT 8042 flag
Change-Id: I00182eb4b059d4d9f0705d349dc98651e3955f0d
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Reviewed-on: https://review.coreboot.org/18311
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Kernel relies on FADT 8042 flag to enable/disable
8042 interface. If FADT reports 8042 capability and
8042 (/PS2) capability is actually disabled by coreboot,
kernel would assume the presence of 8042 based on the
FADT flag. This results in undesired system power off when
kernel tries to access the 8042 memory region. To address
this, CONFIG_NO_FADT_8042 was added to selectively
disable 8042 on FADT.
BUG=chrome-os-partner:61858
TEST=Boot OS and verify FADT 8042 flag
Change-Id: Ic80b3835cb5cccdde1203e24a58e28746b0196fc
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Reviewed-on: https://review.coreboot.org/18307
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Update DPTF parameters based on thermal team test result.
1. Update TSR2 trigger points.
TSR2 passive point: 70, critical point: 90
2. Set PL2 Max to 15W.
BUG=chrome-os-partner:61383
BRANCH=reef
TEST=build, boot on snappy, and verified by thermal team
Change-Id: I8d01d6c1d7eabd359ceb131f3cd10965d4ac2c42
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/18318
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Void pointer arithmetics are forbidden in standard C but GCC has
an extension that allows it.
Change-Id: I43029b2ab2f7709b8e1ba85eb05c31341b8ac16f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18293
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Performance degradation seen with current PL1 throttling rate as 8
seconds for TSR1 sensor with Aquarium workload. After fine tuning PL1
throttling rate to 15 seconds, fps score improved.
BUG=chrome-os-partner:60038
BRANCH=reef
TEST=Built and tested on electro system
Change-Id: I5cdebb08e00f0f28b88f1c6b2b1cafaeb8cdb453
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/18317
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
|
|
There will be more follow-up changes.
BUG=chrome-os-partner:62377
BRANCH=None
TEST=emerge-scarlet coreboot libpayload
Change-Id: I9ca45598ff0ab12bf8063d16a86be564cf509390
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a020a9ba1228b15599e202972df0096f58b1b31c
Original-Change-Id: I4804239483f8b35bc3703aa62c2a8fd642e0234a
Original-Signed-off-by: philipchen <philipchen@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/433039
Original-Commit-Ready: Philip Chen <philipchen@chromium.org>
Original-Tested-by: Philip Chen <philipchen@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18296
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
It's an attempt to consolidate the access code, even if there are still
multiple implementations in the code.
Change-Id: I4b2b9cbc24a445f8fa4e0148f52fd15950535240
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18265
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since it checks for DDR3 style checksums, it's a more appropriate name.
Also make its configuration local for a future code move.
Change-Id: I417ae165579618d9215b8ca5f0500ff9a61af42f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18264
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Also make sure that no board changes behaviour because of that by adding
a static assert.
TEST=abuild over all builds still succeeds (where it doesn't if
DIMM_SPD_SIZE isn't set to 128 bytes for boards that use the
device/dram code).
Change-Id: Iddb962b16857ee859ddcf1b52d18da9b3be56449
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18254
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Shorten field names of struct cbmem_console since saying "buffer_" in
front of everything is redundant and we can use the gained space to save
some line breaks in the code later. This also aligns the definition with
the version in libpayload.
Change-Id: I160ad1f39b719ac7e912d0466c82a58013cca0f9
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18299
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Update FSP UPD header files as per version 1.6.0.
Below UPDs are added to FspsUpd.h:
* DelayUsbPdoProgramming
* MeUnconfigIsValid
* CpuS3ResumeDataSize
* CpuS3ResumeData
CQ-DEPEND=CL:*322871,CL:*323186,CL:*322870
BUG=None
BRANCH=None
TEST=Build and boot on RVP3 and poppy
Change-Id: Id51a474764a28eec463285757d0eb8ec7ca13fd1
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/18289
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The FSP UPD offsets and the corresponding structure size do not match,
CpuConfigData.h needs an update to align the same. Hence update the
header file based on FSP version 1.4.0.
BUG=chrome-os-partner:61548
BRANCH=none
TEST=Built and booted KBLRVP and verify that all UPDs are in sync in
both coreboot and FSP.
Change-Id: I5ef7cbb569c3d1a44e7846717201952a0acf12ab
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/18285
Tested-by: build bot (Jenkins)
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The apollolake boards don't have an me.bin proper, but they still have
descriptor regions which need to be locked down. Therefore, remove the
restriction of HAVE_ME_BIN from LOCK_MANAGEMENT_ENGINE.
BUG=chrome-os-partner:62177
TEST=For apollolake one can select LOCK_MANAGEMENT_ENGINE.
Change-Id: I73aab3a604ec25cd56d760bf76cc21c5a298799e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/18304
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Dump the CSE status registers for potential debugging purposes.
Explicitly call out manufacturing mode of the part since it's
important shipping devices ensure manufacturing mode is locked
down. Intel is planning on writing a common driver so a complete
status -> string dumps was not done because (surprise surprise)
not all the fields are equal with previous implementations.
BUG=chrome-os-partner:62177
BRANCH=reef
TEST=Booted and noted dump of CSE status registers.
Change-Id: I71d15722bb193877f1569c1d3e7f441302f5bd14
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/18303
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This fixes an issue on systems where the S3 state in the pm1 control
registers are not cleared when vboot determines recovery mode is
required on an S3 resume. The EC code will reboot the system knowing
that the EC was in RW. However, on subsequent entry into romstage the
S3 path will be taken and fails to recover cbmem -- forcing another
reboot. To work around that, signal to the platform a reboot is
happening and let the platform perform the necessary fix ups to the
register state.
BUG=chrome-os-partner:62627
Change-Id: Ic144b11b4968c92a1273b8d9eb9dc10f0056bf3d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/18295
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Reef is a convertible add support for sending Tablet mode switch
changes from EC to AP.
Change-Id: I6dfddbfdb5a2ffbdfd77c5f49602bf68e9693a06
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://review.coreboot.org/18277
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Eve is a convertible add support for sending Tablet mode switch
changes from EC to AP.
Change-Id: I35133ebc1439852d0ceb88d7d679b37356b0869d
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://review.coreboot.org/18276
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Add a new driver GOOG0006 to report tablet switch
to user space.
On glados based convertible, check that with a new kernel driver
(cros_ec_tbmc) that evtest collects tablet switch changes.
Change-Id: I6821eaac1feb6c182bc973aaa2f747e687715afb
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/430951
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/18173
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Change-Id: I14c044bb32713ef4133bce8a8238a2bc200c4959
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18085
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Options with no prompt can go anywhere in the tree with the same
dependencies and they have the same effect. Moving them lower in
the tree allows the default values to be overridden by other Kconfig
files.
This patch just moves options with default values that aren't 'n'. The
'n' options are just removed in the next patch, since they aren't needed.
Verified that this makes no significant changes to any config file.
Change-Id: I46175756b937a241edba87dbf70ce1be851fa89d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17907
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The WAK_STS bit is not set in a wake from G3, so the check for this
bit needs to only be done when checking for a wake from S3.
This change correctly enables the keyboard backlight in wake from G3
and only does not enable it during a wake from S3.
BUG=chrome-os-partner:58666
TEST=Use Refresh+Power to issue hard reset and ensure that the keyboard
backlight turns on like it does when waking from S5. Also force enter
hibernate with Alt+VolumeUp+H and then power back up and ensure that
the keyboard backlight is enabled when booting.
Change-Id: I44045950e38aa5e5ae96a79385d604791852c7e6
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18280
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
For Kconfig options that we might want to override the default,
move the fallback default to the bottom of the file. This allows
the default to be set anywhere else, without requiring a select.
This is especially important for non-boolean symbols, which can't
have their defaults overridden in the Kconfig. Those can only be
updated in a saved config file.
Verified that this makes no significant changes to any config file.
Change-Id: I66034f356428f4ccd191d7420baf888edd5216dc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17906
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
When guado/rikku/tidus were rolled into jecht, an error was
made in set_power_led() as guado/rikku set the polarity
differently than tidus. Fix the power LED for guado/rikku
by setting the polarity correctly.
Test: boot guado/rikku and observe proper function of power LED
under S0, S3, and S5 power states.
Change-Id: I23072ac60bc9683776f748ca1326d98257c3c54f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/18249
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Bit 16 in BLC_PWM_CTL enables brightness controls, but the
current value is generic. Use the proper value, obtained
by reading BLC_PWM_CTL while running the VBIOS.
Change-Id: Ib273359e1c285b405a9bb26fc217c2f7e255b99f
Signed-off-by: Francis Rowe <info@gluglug.org.uk>
Reviewed-on: https://review.coreboot.org/10624
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Reason for revert:
Pyro has two touchscreen sources: WACOM/ELAN.
It will not have both touchscreen IC in one system at the same time.
So the "probed" property of WACOM i2c device is mandatory to set for kernel
to know whether it exists before driver initializes it.
Otherwise in ELAN case, when driver fails to init WACOM i2c device, ACPI _OFF
will be invoked to set GPIO#152 low to cut off power.
BUG=chrome-os-partner:62371
BRANCH=reef
TEST=emerge-pyro coreboot
Change-Id: I30f467bd8720d959686dc14f7877e6bc11ea6213
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/18291
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This also selects RELOCATABLE_RAMSTAGE and
CACHE_RELOCATABLE_RAMSTAGE_OUTSIDE_CBMEM by default on Haswell.
Change-Id: I50b9ee8bbfb3611fccfd1cfde58c6c9f46b189ca
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18232
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This change fixes the two sets of pins that were swapped in the
map of DQS signals from CPU to DRAM for channel 1.
Although this does not appear to have any impact to the system it
does result in different register values for DQS pin mapping that
are programmed inside FSP.
BUG=chrome-os-partner:58666
TEST=This fix was verified against the current schematic and using
FSP debug output.
Change-Id: I45b821071ba287493b3b13204b7f5b38e06eee75
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18279
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The selection of the SSC reference frequency for LVDS was based on a
completely unrelated clock.
The `ssc_freq` flag should be set when the SSC reference runs at a
different frequency than the general display reference clock (DREF).
For most platforms, there is no choice, i.e. for i945 and gm45 the SSC
reference always differs from the display reference clock (i945: 66Mhz
SSC vs. 48MHz DREF; gm45: 100MHz SSC vs. 96Mhz DREF), for Nehalem and
newer, it's the same frequency for SSC/non-SSC (120MHz). The only,
currently supported platform with a choice seems to be Pineview, where
the alternative is 100MHz vs. the default 96MHz.
Change-Id: I7791754bd366c9fe6832c32eccef4657ba5f309b
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/18186
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
same change as I49935e659bf67225d3f5db1b06acc2cd046dcd74
this is required for poppy board as well.
GPIO GPP_D22 controls the I2S buffer for isolating the I2S signals
when doing GPIO-driven I2S. This needs to be high by default so
the DSP can drive these signals, instead of low where it is enabled
for GPIO-driven I2S and the DSP cannot drive these signals.
BUG=None
BRANCH=None
TEST=play test sound in OS over internal speaker
Change-Id: I1695e9198f8f78e9c5ad6df6c1ac073ac1762c6b
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/18282
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
GPIO GPP_D22 controls the I2S buffer for isolating the I2S signals
when doing GPIO-driven I2S. This needs to be high by default so
the DSP can drive these signals, instead of low where it is enabled
for GPIO-driven I2S and the DSP cannot drive these signals.
BUG=chrome-os-partner:58666
TEST=play test sound in OS over internal speaker
Change-Id: I49935e659bf67225d3f5db1b06acc2cd046dcd74
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18281
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The me_cleaner option is available on multiple platforms:
* Sandy and Ivy Bridge (well tested by multiple users).
* Skylake and Braswell (tested).
* Haswell, Broadwell and Bay Trail (untested).
The untested platforms have been included anyways because all the
firmwares are very similar and Intel ME/TXE probably behaves in the
same way.
Change-Id: I46f461a1a7e058d57259f313142b00146f0196aa
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/18206
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Hide the IGD to make sure ramstage doesn't detect it.
Change-Id: If389016f3bb0c4c2fd0b826914997a87a9137201
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18194
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add VFCT table to provide PCI Optiom Rom for
AMD graphic devices.
Useful for GNU Linux payloads and embedded dual GPU systems.
Tested on Lenovo T500 with AMD RV635 as secondary gpu.
Original Change-Id: I3b4a587c71e7165338cad3aca77ed5afa085a63c
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Change-Id: I4dc00005270240c048272b2e4f52ae46ba1c9422
Reviewed-on: https://review.coreboot.org/18192
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch sets PL2 override value to 15W in RAPL registers.
BUG=chrome-os-partner:62110
BRANCH=reef
TEST=Apply new firmware to evaluate Octane benchmark score.
Change-Id: I51734051586753677129314b5273fb275c74f5d2
Signed-off-by: Harry Pan <harry.pan@intel.com>
Reviewed-on: https://review.coreboot.org/18283
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This allows for defaults to be applied to CMOS parameters
when cmos checksum is incorrect.
This probably results in changed cmos settings for current users of
these targets.
Change-Id: Ifec0093f4b0dbaa51b96812a041f0eaf5c58ee86
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17041
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Activate the IOMMU for the ASUS F2A85-M LE board.
Enable the IOMMU in `devicetree.cb` and build AGESA IOMMU code by
enabling the option in `buildOpts.c`.
ACPI and MPTABLES interrupt routers are already present since they are
syminks to the F2A85-M version.
```
$ uname -a
Linux nukunuku 4.8.5 #35 SMP Sun Oct 30 19:34:55 CET 2016 x86_64 GNU/Linux
$ lspci -s 0.2
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) I/O Memory Management Unit
$ dmesg | grep -i IOMMU
ACPI: IVRS 0x00000000BFFAFF70 000070 (v02 AMD AMDIOMMU 00000001 AMD 00000000)
AMD-Vi: Applying erratum 746 workaround for IOMMU at 0000:00:00.2
iommu: Adding device 0000:00:01.0 to group 0
[...]
iommu: Adding device 0000:00:18.5 to group 9
iommu: Adding device 0000:03:00.0 to group 8
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
```
Change-Id: I6049fcfad53d16a99495d7a8fbc584c71e371d73
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: https://review.coreboot.org/18259
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This mainboard is based on Intel's Leafhill CRB with Apollo Lake
silicon. In a first step, it concerns only a copy of intel/leafhill
directory with minimum changes. Special adaptations for MC APL1
mainboard will follow in separate commits.
Change-Id: If0b8a2bc21c99c3be4e6043e8febfb1b91ff0a63
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/18272
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Brenton Dong <brenton.m.dong@intel.com>
|
|
Add new ChromeOS devices banjo, candy, clapper, glimmer, gnawty,
heli, kip, orco, quawks, squawks, sumo, swanky, and winky using
their common reference board (rambi) as a base.
Chromium sources used:
firmware-banjo-5216.334.B 32ec493 [chromeos: vboot_loader: Set...]
firmware-candy-5216.310.B 519ff11 [baytrail: Preserve VbNv around...]
firmware-clapper-5216.199.B 80d55e3 [baytrail: add code for...]
firmware-glimmer-5216.198.B fae0770 [baytrail: add code for...]
firmware-gnawty-5216.239.B 952adb7 [Gnawty/Olay: Add 2nd source...]
firmware-heli-5216.392.B f1f3604 [helis: Lock ME / TXE section...]
firmware-kip-5216.227.B db3c5d9 [kip: update spd for for MT41K256M16*]
firmware-orco-5216.362.B 76f1651 [Orco: Adjust rx delay for norm.]
firmware-quawks-5216.204.B edb60c9 [Quawks: Update SPD data]
firmware-squawks-5216.152.B c6573dc [Squawks: Update SPD data]
firmware-sumo-5216.382.B c62b6f23 [Ninja, Sumo: Add SPD source...]
firmware-swanky-5216.238.B 233b2a7 [Swanky: update SPD table]
firmware-winky-5216.265.B ce91ffc [Add to support HT Micron...]
The same basic cleanup/changes are made here as with the initial BYT
variant commit:
- remove unused ACPI trackpad/touchscreen devices
- correct I2C addresses in SMBIOS entries
- clean up comment formatting
- remove ACPI device for unused light sensor
- switch I2C ACPI devices from edge to level triggered interrupts,
for better compatibility/functionality (and to be consistent
with other recently-upstreamed ChromeOS devices)
- Micron 2GB SPD file for kip with updated values renamed to distinguish
from same file used by other boards
Change-Id: Ic66f9b539afb5aff32c4c1a8563f6612f5a2927c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/18164
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
That status isn't needed and making it non-static helps gcc 4.9.2 (or
any compiler that insists on "standard C" behaviour with global const
initializers)
Change-Id: Ib1fbd5213d262e653f31564b106095b4a28292f6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/18266
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
We rely on gnu make, so we can expect the jobserver to be around in
parallel builds, too. Avoids some make warnings and slightly speeds up
the build if those sub-makes are executed (eg for arm-trusted-firmware
and vboot).
Change-Id: I0e6a77f2813f7453d53e88e0214ad8c1b8689042
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/18263
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Reorder the items to minimize the differences.
Change-Id: I745ec70a990f997d87c2a0b6164ae127eb694ddf
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/17438
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The rule to make spd.bin that's in src/lib is for the 'generic_spd_bin'
implementation. It wasn't guarded though, so it was generating a build
warning for any other platform that generated an spd.bin file.
Sample warning that this fixes:
src/mainboard/gizmosphere/gizmo/Makefile.inc:42:
warning: overriding recipe for target 'build/spd.bin'
src/lib/Makefile.inc:298: warning: ignoring old recipe for target
'build/spd.bin'
Change-Id: Iadd6743f8ae476969bf36f99b918f04c04172d1d
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/18261
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Apollolake boards should use DMIC-4ch configuration in Kernel side and
use CaptureChannelMap in userspace to distinguish boards with different
number of DMIC's. So, NHLT DMIC 1-ch & 2-ch endpoint configuration will
not be required and hence removed.
BUG=chrome-os-partner:60827
TEST=Verify internal mic capture
TEST='arecord -Dhw:0,3 dmic_4ch.wav -f S16_LE -r 48000 -c 4 -d 10' works
Change-Id: Ibe81290906c9e379ae49e437648ee9cd6f123ff8
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-on: https://review.coreboot.org/18252
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
EC sets the logic level based on outstanding wake events. When GPIO_22
is configured as a level triggered interrupt, the events are not
cleared from the interrupt handler. Hence, we'd just be re-signalling
over and over causing an interrupt storm upon lid open. So, GPIO_22
needs to be configured as EDGE_SINGLE instead of LEVEL.
BUG=chrome-os-partner:62458
TEST=Lid close/open. check CPU usage using top. It should
not show 70% CPU usage.
Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
Change-Id: I710a690578c6e5b63be34b7fbcb21c703ef56e3a
Reviewed-on: https://review.coreboot.org/18267
Tested-by: build bot (Jenkins)
Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
For the boards that intend to use mock tpm and have recovery mrc cache
support enabled, provide mock functions to read and write mrc hash
space.
Reading MRC hash space returns TPM_SUCCESS as later checks take care of
comparing the hash value and retraining if hash comparison fails. Thus,
in case of mock tpm, device would always end up doing the memory
retraining in recovery mode.
BUG=chrome-os-partner:62413
BRANCH=None
TEST=Verified that eve builds with mock tpm selected.
Change-Id: I7817cda7821fadeea0e887cb9860804256dabfd9
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18248
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Export PowerResource for WDT touchscreen device.
BUG=chrome-os-partner:62311, chrome-os-partner:60194,
chrome-os-partner:62371
BRANCH=reef
TEST=Compiles successfully.
Change-Id: Icc5be170353753201d3571c39b50e29424d4d6d3
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18240
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1. For ELAN, export reset GPIO as well as PowerResource
2. For WCOM, export PowerResource
BUG=chrome-os-partner:62311, chrome-os-partner:60194,
chrome-os-partner:62371
BRANCH=reef
TEST=Verified that touchscreen works on pyro with WCOM device on
power-on as well as after suspend/resume.
Change-Id: I0306e24e19bf821cd3e08fdacc0d78b494c9a92f
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18239
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Linux kernel expects that power management with ACPI should always be
handled using PowerResource. However, some kernel drivers (e.g. ELAN
touchscreen) check to see if reset gpio is passed in by the BIOS to
decide whether the device loses power in suspend. Thus, until the kernel
has a better way for drivers to query if device lost power in suspend,
we need to allow passing in of GPIOs via _CRS as well as exporting
PowerResource to control power to the device.
Update mainboards to export reset GPIO as well as PowerResource for
ELAN touchscreen device.
BUG=chrome-os-partner:62311,chrome-os-partner:60194
BRANCH=reef
TEST=Verified that touchscreen works on power-on as well as after
suspend-resume.
Change-Id: I3409689cf56bfddd321402ad5dda3fc8762e6bc6
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18238
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
I2C data (GPIO_132) and Clk (GPIO_133) lines are pulled low during
standby states S3/S0ix. This causes leakage of power. To reduce the
leakage, we have to pull these lines high during S3/S0ix. This is
done by programming the IOSSTATE to HIz. Also note that we are using
the internal pull ups to keep at SOC at 1.8V and the I2C lines are
not floating.
BUG=chrome-os-partner:62428,chrome-os-partner:61651
TEST=Enter S3/S0ix. Measure trackpad power. It should be less
than 4mW. Also I2c lines should be pulled high in S3/S0ix.
Change-Id: I5570ac37ec3cc41f6463dd6b858fdb56a20a1733
Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
Reviewed-on: https://review.coreboot.org/18251
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
If cmos is invalid, it doesn't make sense to read the value before
finding that out.
Change-Id: Ieb4661aad7e4d640772325c3c6b184de1947edc3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18236
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
In order to pass type A USB2 eye diagram,
USB2 port#0/#1 PHY register will need to be overridden.
port#0:
PERPORTPETXISET = 7
PERPORTTXISET = 1
IUSBTXEMPHASISEN = 3
PERPORTTXPEHALF = 0
port#1:
PERPORTPETXISET = 7
PERPORTTXISET = 2
IUSBTXEMPHASISEN = 3
PERPORTTXPEHALF = 0
BUG=chrome-os-partner:59491
BRANCH=reef
TEST=emerge-pyro coreboot
Change-Id: I8e67a6f0192d1c0abf6ec4926c2a17e44c818948
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/18229
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Wacom touchscreen is i2c hid device and it's the device that always
exists.
So no need to set "probed" property for it.
BUG=chrome-os-partner:61513
BRANCH=reef
TEST=emerge-pyro coreboot
Change-Id: I27fe18ceadd03029b826e0237f80132eda1089b0
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/18227
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The default macaddress in rt8168.c can be changed with a cbfsfile
called macaddress. This patch makes it possible to add such a file
using Kconfig at build time.
This also changes the name of the cbfsfile from "macaddress" to
"rt8168-macaddress" to avoid confusion.
Change-Id: I24674d8df11845167b837b79344427ce0c67f4fb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18088
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Ubuntu’s default compiler flags for GCC [1][2] include `-Wformat
-Wformat-security`, causing errors similar like the one below.
```
CC romstage/northbridge/amd/amdht/ht_wrapper.o
src/northbridge/amd/amdht/ht_wrapper.c: In function 'AMD_CB_EventNotify':
src/northbridge/amd/amdht/ht_wrapper.c:124:4: error: format not a string literal and no format arguments [-Werror=format-security]
printk(log_level, event_class_string_decodes[evtClass]);
^
[…]
```
Fix that, by explicitly using a format string.
TEST=Built and booted on ASUS KGPE-D16.
[1] https://stackoverflow.com/questions/17260409/fprintf-error-format-not-a-string-literal-and-no-format-arguments-werror-for
"fprintf, error: format not a string literal and no format arguments [-Werror=format-security"
[2] I tested with gcc (Ubuntu 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609.
Change-Id: Iabe60deeffa441146eab31dac4416846ce95c32a
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/18208
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I877d4470b697d6a6d4652ed1c60028cdcbe8df98
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18143
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ia7fa2c290e540ff779cf8dc16147db5a248021e2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18142
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Follow i2c-hid spec definition, level trigger interrupt is required
for i2c-hid device.
BUG=chrome-os-partner:61513
BRANCH=reef
TEST=emerge-pyro coreboot
Change-Id: Ia825bd0c898e71e2ee2bf411f117a49a8fb411b6
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/18217
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This fixes building coreboot with -std=gnu11 on gcc 4.9.x
Also needs fix ups for asus/kcma-d8 and asus/kgpe-d16 due to the missing
type.
Change-Id: I920d492a1422433d7d4b4659b27f5a22914bc438
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18220
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This reverts commit 580db7fd9036134b1da4fe7340e306fee4681659.
There's a (parallel) mechanism more closely aligned with how the values
are filled in (fixed device part + version string) that landed from
Chrome OS downstream (see commit 4399b85fdd).
Change-Id: I5ccd06eadabb396452cc9d1d4dff780ea0720523
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18205
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
In order for PD charge events to properly notify the OS when a charger is
attached we need to enable the PD MCU device and event source from the EC.
Without this change the charging still happens, but the OS does not notice
and update the charge state icon in the Chrome OS UI.
BUG=chrome-os-partner:62206
BRANCH=none
TEST=plug in a charger to either port and see charge status updated to
indicate charging in the power_supply_info tool and the Chrome OS UI.
Change-Id: Ia6f63ac719b739326d313f657a68005c32f45b8d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18209
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add support for Lenovo Thinkpad L520.
The files are generated by autoport,
and are successfully tested on the board.
L520 has got 4MiB flash chip, that contains a "slim" ME
with 1.2MiB only. The flash IC has to be desoldered, as
it won't be accessible in circuit. It is located on top
of the mainboard right under the touchpad.
Test-setup:
Extract the following blobs from vendor BIOS:
* Intel Flash Descriptor
* Intel Management Engine
* Intel VBios
The laptop has been externaly flashed. It was able to
turn on the display and load SeaBIOS.
Latest debian has been booted from harddisk.
Latest fedora has been booted from USB flash drive.
The following hardware has been tested and is working:
* Display using Option Rom
* PCIe wifi
* Ethernet
* Keyboard, trackpoint and touchpad
* Some Fn functions keys
* Volume Keys (except mic mute)
* Status LEDs
* Audio (headphone jack only)
* USB ports
* Native raminit dual channel (2 DDR3-1333 DIMMs tested)
* SATA cdrom
* SATA harddrive
Broken:
* Some Fn functions keys
* Microphone mute button
* Speakers (but headphone jack gives sound)
Untested:
* Expansion slot
* SD card slot
* Docking station
* Native gfx init
The EHCI debug port is the first one on the right side.
Change-Id: Ic8943799b953bde09ff1daf8427ce5125a0778ca
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18003
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This commit makes the initial changes to support the Intel Leaf Hill
CRB with Apollo Lake silicon. Memory parameters and some GPIOs are set.
The google/reef directory is used as a template, and the same IFWI
stitching process as reef is used to generate a bootable image.
Apollo Lake silicon requires a boot media region called IFWI which includes
assets such as CSE firmware, PMC microcode, CPU microcode, and boot
firmware.
Change-Id: Id92f0458548e3054d86f5faa8152d58d902f4418
Signed-off-by: Brenton Dong <brenton.m.dong@intel.com>
Reviewed-on: https://review.coreboot.org/18039
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
o Fix indentation and other whitespace issues,
o Use `const` where applicable,
o Avoid retyping the same constant literals,
o Actually read PCI revision from the device (instead of using the
lowest class byte).
Change-Id: I2c64153c61a51a6a87848360d22f981225812a3b
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/18185
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This commit adds the initial scaffolding for the Intel Leafhill CRB
with Apollo Lake silicon.
The google/reef directory is used as a template. This commit only
makes the minimum changes to Kconfig and Kconfig.name needed for
the build bot to not have issues.
Change-Id: I088edee0e94ecfb4666fa31e08dbcfd24a81891b
Signed-off-by: Brenton Dong <brenton.m.dong@intel.com>
Reviewed-on: https://review.coreboot.org/18038
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Currently, it will print the function name as a prefix to the debug
output. Make it so that a null function name won't get printed, so
that it's possible to print little bits of debug output.
BUG=chromium:683391
BRANCH=none
TEST=build_packages --board=reef chromeos-firmware
Change-Id: I046fa766773fc08a29460db1f884d7902692d182
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 853ff7176e97e5e1ab664d094e1914c9c94510aa
Original-Change-Id: I1dff38e4d8ab03118e5f8832a16d82c2d2116ec9
Original-Signed-off-by: Randall Spangler <rspangler@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/431111
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18204
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
It may cause an edp aux transfer error if the edp pclk is
set too high, so reduce it to 25MHz.
BUG=chrome-os-partner:60130
BRANCH=None
TEST=Build and Boot
Change-Id: Id1063baa5a82637b03c0f1f754181df074ab17cc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8f7ce31a7483e765ae0c86f8e62ef51413ee1596
Original-Change-Id: Ibb86c12c1d7c00dc3b4cc7a6bdf3bd6e895cd9f3
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/429410
Original-Commit-Ready: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18178
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
1. Update DPTF CPU/TSR1 passive trigger points.
CPU passive point: 80
TSR1 passive point: 46
2. Update DPTF TRT Sample Period
TSR1: 8s
BUG=chrome-os-partner:62133
BRANCH=reef
TEST=emerge-pyro coreboot
Change-Id: I8fcf750ac17b8894ed3c8704eec62f5071d9cf24
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/18174
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The same GPIOs are used on both platforms, definitions are added an a
new .h to make it easier to re-use them across the code.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=panel backlight still enabled on Gru as before. The rest of the
GPIOs are used in the upcoming patches.
Change-Id: I54ef3e8dd79670bdb037baeec91430113d11bcc1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c58788026f28af52c650da0159b93d97269ca4a9
Original-Change-Id: I1a6c5b5beb82ffcc5fea397e8e9ec2f183f4a7e0
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/346219
Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com>
Reviewed-on: https://review.coreboot.org/18176
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The results were obtained by comparing the MCHBAR registers of vendor bios
with coreboot at the same dram timings.
This fixes 2 issues:
* 1333MHz fsb CPUs were limited to 667MHz ddr2 speeds, because with
800MHz raminit failed;
* 1067MHz fsb CPUs did not boot when second dimm slot was populated.
TESTED on ga-g41m-es2l on 800, 1067 and 1333MHz CPUs with
DDR2 667 and 800MHz dimms.
Change-Id: I70f554f97b44947c2c78713b4d73a47c06d7ba60
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18022
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Update the DPTF parameters based on thermal test result.
(ZHT_DPTF_EVT2_v0.4_20170120.xlsx)
1. Update DPTF TSR1 passive trigger point.
TSR1 passive point: 46
BUG=chrome-os-partner:60038
BRANCH=master
TEST=build and boot on electro dut
Change-Id: If35e4cf2dbf7c506534c52a052598f6204d5315a
Signed-off-by: Tim Chen <Tim-Chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/18183
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The devicetree settings were incorrect in a few places with
respect to the SOC and board design:
- IMVP8 VR workaround is for MP2939 and not MP2949 on Eve
- IccMax values are incorrect according to KBL-Y EDS
- USB2[6] is incorrectly labeled
- I2C touch devices do not need probed as they are not optional
- PCIe Root Port 5 should be enabled
- I2C5 device should not be enabled as it is unused
BUG=chrome-os-partner:58666
TEST=manually tested on Eve board
Change-Id: I74e092444ead4b40c6d8091b80a691d44e2c6c7d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18200
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In order to get quick boot speeds into recovery enable the
feature that allows for a separate recovery MRC cache.
This requires shuffling the FMAP around a bit in order to
provide another region for the recovery MRC cache. To make
that shuffling easier, group the RW components into another
sub-region so it can use relative addresses.
BUG=chrome-os-partner:58666
TEST=manual testing on eve: check that recovery uses the MRC
cache, and that normal mode does too. Check that if cache is
retrained in recovery mode it is also retrained in normal mode.
Also check that events show up in the log when retrain happens.
Change-Id: I6a9507eb0b919b3af2752e2499904cc62509c06a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18199
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The lpss_i2c driver is enabled in romstage, so the SOC needs to
export the pre-ram compatible I2C controller info, which for
skylake is in the bootblock/i2c.c file.
This was not causing a compiler error in normal use, but when
adding I2C debug code in romstage it failed to compile.
With this added, I can now do I2C transactions in romstage.
Change-Id: I0778b0497d0b6936df47c29b2ce942c8d90cf39b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18198
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Enable the keyboard backlight as early in boot as possible to
provide a indication that the BIOS is executing.
Since this is bootblock it can't use the convenience function
for checking for S3 resume so just read the PM1 value from the
SOC and check it directly.
Use a value of 75% for the current system as that is visible
without being full brightness.
BUG=chrome-os-partner:61464
TEST=boot on eve and check that keyboard backlight is enabled
as soon as the SOC starts booting
Change-Id: I9ac78e9c3913a2776943088f35142afe3ffef056
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18197
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The define for GPIO_13_IRQ had the wrong IRQ number. It should
be 0x70 instead of 0x6f.
BUG=chrome-os-partner:62085
BRANCH=reef
TEST=touch controller doesn't indicate continuous interrupts
Change-Id: I3a0726db59fc1eb7736d348aecbf1082719f15b2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/18190
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The PP1800_S rail is turned off in S3. However, enabling internal
pullups on the pins which are connected to PP1800_S results in
leakage into the P1800_S rail. Fix this by disabling the internal
pullups on PP1800_S rail pins.
BUG=chrome-os-partner:61968
BRANCH=reef
TEST=measured leakage on PP1800_S rail. Gone with this patch.
Change-Id: I5ae92b31c1a633f59d425f4105b8db1c9c18c808
Signed-off-by: Aaron Duribn <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/18189
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ic8149b1dd19d70935e00881cffa7ead0960d1c78
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18154
Tested-by: build bot (Jenkins)
Reviewed-by: Piotr Król <piotr.krol@3mdeb.com>
|
|
Installed memory only, PCB revision cannot be detected.
Change-Id: Ib6224018db3de4a7ddd9e6f7f30edc438c3f0702
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18153
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ie4f80619d9417200a007fc65154b97a5bc05f2f8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18152
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This string should not include manufacturer name.
Change-Id: I63793b16129334ea4930b8b0264a39d7f9849bba
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18151
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Assembled SoC part does not have integrated graphics.
Change-Id: I5d157063cd850d343df73d448e6904c188a09730
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18150
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ie1c360ac29eb30af6f4b5447add467f3c13ba211
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18180
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
They were sized to 32-bit alignment, this grows them to 64 bit-aligned.
Change-Id: I494b942c4866a7912fb48a53f9524db20ac53a8c
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/18165
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add weida touchscreen as 2nd touchscreen source
BUG=chrome-os-partner:61865
BRANCH=reef
TEST=emerge-snappy coreboot, and verified that touchscreen works on
snappy.
Change-Id: If76312a62e97da9d5de18ad895e90ee6b0f0c6ae
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/18166
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
ELAN touchscreen device expects firmware to export GPIOs and ACPI
regulators for managing power to the device. Thus, provide the
required ACPI elements for OS driver to properly manage this device.
BUG=None
BRANCH=None
TEST=Verified that touchscreen works properly on boot-up and after
suspend/resume.
Change-Id: I78e0c35f60289afe338d140d90784a433ca534ae
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/18163
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
