Age | Commit message (Expand) | Author |
2013-03-14 | lynxpoint: PMIR register rename | Aaron Durbin |
2013-03-14 | lynxpoint: Management Engine Updates | Aaron Durbin |
2013-03-14 | haswell: Properly Guard Engergy Policy by CPUID | Aaron Durbin |
2013-03-14 | haswell: add PCI id support | Aaron Durbin |
2013-03-14 | haswell: Remove logic to send dram init done to ME | Aaron Durbin |
2013-03-14 | basking ridge: update gpio, spd addresses, and OC | Aaron Durbin |
2013-03-14 | haswell: notes and updates. | Aaron Durbin |
2013-03-14 | haswell: align pei_data structure with intel-framework | Aaron Durbin |
2013-03-14 | haswell: use #defines for constants in udelay.c | Aaron Durbin |
2013-03-14 | Mainboard: Add support for Grays Reef | Aaron Durbin |
2013-03-14 | haswell: Add LPT LP device IDs to platform report | Duncan Laurie |
2013-03-14 | haswell: Update GPU power management setup | Duncan Laurie |
2013-03-14 | lynxpoint: Update IOBP programming method | Duncan Laurie |
2013-03-14 | x86: SMM Module Support | Aaron Durbin |
2013-03-14 | Support ITE IT8518 embedded controller running Quanta's firmware | Stefan Reinauer |
2013-03-14 | haswell: always use MMIO PCI config accesses | Aaron Durbin |
2013-03-14 | haswell: Add initial support for Haswell platforms | Aaron Durbin |
2013-03-14 | exynos5250: add RAM resource beginning at physical address | David Hendricks |
2013-03-13 | Eagleheights DSDT: Grant OS control through OSC | Mike Loptien |
2013-03-13 | exynos5250/snow: enable branch prediction | David Hendricks |
2013-03-13 | src/mainboard: Drop redundant `CHIP_NAME` again for new ports | Paul Menzel |
2013-03-13 | exynos5250: Don't set PS_HOLD in bootblock_cpu_init | David Hendricks |
2013-03-13 | exynos5250/snow: call PMIC's power_init() function | David Hendricks |
2013-03-12 | AMD CIMx SB800: Enable AHCI mode for SATA controller by default | Paul Menzel |
2013-03-12 | watchdog.h: Fix compile time error on disabling watchdog handling | Patrick Georgi |
2013-03-11 | pci.h: Drop unused `mainboard_pci_subsystem*` prototypes | Patrick Georgi |
2013-03-11 | ASUS M5A88-V: Kconfig: Fix mainboard model name | Paul Menzel |
2013-03-09 | Add Intel Panther Point USB3 initialization | Marc Jones |
2013-03-08 | Persimmon DSDT: Add secondary bus range to PCI0 | Mike Loptien |
2013-03-08 | Eliminate do_div(). | David Hendricks |
2013-03-08 | AMD Inagua: Use SPD read code from F14 wrapper | Kimarie Hoot |
2013-03-08 | AMD CIMx SB800 boards: platform_cfg.h: Integrate Kconfig SATA Mode choice | Paul Menzel |
2013-03-08 | AMD Persimmon: mainboard.c: Make comment generic to reduce difference | Paul Menzel |
2013-03-08 | AMD Union Station: Use SPD read code from F14 wrapper | Kimarie Hoot |
2013-03-08 | AMD South Station: Use SPD read code from F14 wrapper | Kimarie Hoot |
2013-03-08 | ARMV7 and Google/Snow: Add exception support code to the ramstage | Ronald G. Minnich |
2013-03-08 | AGESA: Fix CR0_PE bit define | Konstantin Aladyshev |
2013-03-08 | Supermicro H8QGI: set up right frequency limits for memory controller | Konstantin Aladyshev |
2013-03-08 | AGESA: Fix bug in AMD_DISABLE_STACK_FAMILY_HOOK_F15 | Konstantin Aladyshev |
2013-03-08 | FrontRunner/Toucan-AF: lower SPI speed to 22 MHz | Jens Rottmann |
2013-03-07 | AMD Persimmon: Use SPD read code from F14 wrapper | Martin Roth |
2013-03-07 | AMD Fam14: Add SPD read functions to wrapper code | Martin Roth |
2013-03-07 | Remove UTF-8 characters from comments | Ronald G. Minnich |
2013-03-07 | Revert "ARMv7: Simplify div64" | David Hendricks |
2013-03-07 | snow: add real values for GPIOs in fill_lb_gpios() | David Hendricks |
2013-03-07 | exynos5: add GPIO port enums | David Hendricks |
2013-03-07 | google/snow: fix coding style | Stefan Reinauer |
2013-03-07 | src/arch/x86/boot/acpigen.c: Small coding style and comment fixes | Paul Menzel |
2013-03-07 | Fix build by adding `cbmem.c` to `COLLECT_TIMESTAMPS` | Kyösti Mälkki |
2013-03-07 | Intel e7505: provide get_top_of_ram | Kyösti Mälkki |
2013-03-07 | Fix socket LGA775 | Kyösti Mälkki |
2013-03-07 | ASRock E350M1: Let `BiosGnbPcieSlotReset()` return `AGESA_UNSUPPORTED` | Paul Menzel |
2013-03-06 | samsung/exynos5: add display port and framebuffer defines and initialization | Ronald G. Minnich |
2013-03-06 | ASRock E350M1: mainboard.c: Add declarations for `set_pcie_{,de}reset` | Paul Menzel |
2013-03-06 | Google/Snow: enable sound hardware clocks | Ronald G. Minnich |
2013-03-06 | google/snow: Change MMC0 to work in 8 bit mode. | Ronald G. Minnich |
2013-03-06 | AMD SB800: don't switch clock from 14 to 48 MHz for smscsuperio | Jens Rottmann |
2013-03-04 | FrontRunner/Toucan-AF: drop unnecessary compile time CPU model selection | Jens Rottmann |
2013-03-04 | ARM: remove code that is IMHO a dangerous design | Ronald G. Minnich |
2013-03-04 | bump SeaBIOS to 1.7.2.1 | Idwer Vollering |
2013-03-03 | AMD Persimmon, LiPPERT Fam14: Fix typo code*c* in comment | Paul Menzel |
2013-03-02 | ASRock E350M1: Remove non-existing PCI devices 12.1 and 13.1 | Paul Menzel |
2013-03-02 | FrontRunner/Toucan-AF: work around AGESA RAM init crashing on reboot | Jens Rottmann |
2013-03-02 | LiPPERT Toucan-AF [2/2]: actually implement mainboard support | Jens Rottmann |
2013-03-02 | LiPPERT Toucan-AF [1/2]: create board by forking AMD Persimmon | Jens Rottmann |
2013-03-02 | LiPPERT FrontRunner-AF [2/2]: actually implement mainboard support | Jens Rottmann |
2013-03-02 | LiPPERT FrontRunner-AF [1/2]: create board by forking AMD Persimmon | Jens Rottmann |
2013-03-01 | GPLv2 notice: Unify all files to just use one space in »MA 02110-1301« | Paul Menzel |
2013-03-01 | armv7/snow: Add S5P MSHC initialization in ROM stage. | Hung-Te Lin |
2013-02-28 | Revert "ARMv7: drop special handling for stages.c" | Ronald G. Minnich |
2013-02-28 | CBMEM: always initialize early if the board supports it | Stefan Reinauer |
2013-02-28 | Drop SRC_ROOT from mainboard Makefile.incs | Stefan Reinauer |
2013-02-28 | Use defines for some i82801ex/gx registers | Kyösti Mälkki |
2013-02-28 | ARMv7: drop special handling for stages.c | Stefan Reinauer |
2013-02-28 | Drop CONFIG_WRITE_HIGH_TABLES | Stefan Reinauer |
2013-02-27 | Fix microcode selection code | Stefan Reinauer |
2013-02-27 | Google/snow: update the GPIO emulation. | Ronald G. Minnich |
2013-02-27 | Persimmon: remove HDMI Audio, PCI device 00:01.1 from devicetree.cb | Jens Rottmann |
2013-02-27 | selfboot: Report correct entry point address in debug message. | Hung-Te Lin |
2013-02-27 | smm: Update rev 0x30101 SMM revision save state | Aaron Durbin |
2013-02-27 | Mainboard SMI S state handler was using the wrong defines | Marc Jones |
2013-02-27 | IOAPIC: Divide setup_ioapic() in two parts. | Kyösti Mälkki |
2013-02-26 | Unify setting 82801a/b/c/d IOAPIC ID | Kyösti Mälkki |
2013-02-26 | AMD Inagua: buildOpts.c: Adapt whitespace to coding style | Paul Menzel |
2013-02-26 | AGESA: skip s3_resume.h if CONFIG_HAVE_ACPI_RESUME is disabled | Jens Rottmann |
2013-02-26 | AMD Fam14 boards: reduce unnecessary differences, 2nd attempt | Jens Rottmann |
2013-02-26 | Revert "AMD S3: Program the flash in a bigger data packet" | Dave Frodin |
2013-02-25 | AMD Southbridge: Add RTC init to lpc_init | Mike Loptien |
2013-02-25 | Supermicro H8SCM & H8QGI: Fix printk warnings | Martin Roth |
2013-02-25 | AMD Southstation: Fix final warning | Martin Roth |
2013-02-25 | AMD Fam14 boards: Set P_BLK length to 6 for all processors | Paul Menzel |
2013-02-25 | Persimmon, Inagua: PCI devs 12.1, 13.1 (USB) don't exist, but 14.6 (GEC) does | Jens Rottmann |
2013-02-25 | AMD boards: ACPI DSDT: Use COREBOOT for the OEM Table ID field | Paul Menzel |
2013-02-25 | google/snow: enable GPIO entries and CHROMEOS in building | Ronald G. Minnich |
2013-02-25 | QEMU x86: northbridge.c: Name enabling device function to `northbridge_enable` | Paul Menzel |
2013-02-25 | Persimmon: Fix warning, enable warnings as errors | Martin Roth |
2013-02-25 | mainboard.c: Name enable_dev function uniformly `mainboard_enable` | Paul Menzel |
2013-02-25 | Technologic TS5300: mainboard.c: Move { to next line | Paul Menzel |
2013-02-25 | ARMv7: Simplify div64 | Stefan Reinauer |
2013-02-24 | Siemens SITEMP G1P1: mainboard.c: Rename `init` to `mainboard_init` | Paul Menzel |