| Age | Commit message (Collapse) | Author |
|---|
|
As per commit 865173153760 ("sconfig: Move config_of_soc from device.h
to static.h"), sources that require access to the devicetree should
directly include static.h so that it can be removed from device.h,
eliminating unnecessary dependencies on static.h for files that only
need the types and function declarations in device.h.
Change-Id: I3c118a707dfe7bb8932606f30eae52ef0b4c9efe
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
HPET General Capabilities and ID Register at offset 0x0 and Timer 0
Configuration and Capability Register at offset 0x100 are used to
determine the generation of HPET ACPI tables. This patch adds
macro definitions for these registers and fields. Definitions are
from IA-PC HPET (High Precision Event Timers) Specification Revision
1.0a.
Change-Id: I31413afcbfc42307e3ad3f99d75f33f87092d7aa
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84252
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel common IMC contains an embedded SMBus controller for SPD data
access. This patch implements IMC based SPD access supports through
MMIO.
Register definitons are from Intel Atom Processor C5100, C5300, P5300
and P5700 Product Families EDS, doc No. 575160 rev 2.0.
Change-Id: I3f47ddeda94d3882852d64c0052f8fb42b6b7ad2
Tested-by: Yuchi Chen <yuchi.chen@intel.com>
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
By default, PCH SMBus codes will be called to retrieve SPD data. This
patch adds a SPD IO layer so that SoC could implement its specific SPD
IO layer functions such as using Integrated Memory Controller to get
SPD data.
Change-Id: I656298aeda409fca3c85266b5b8727fac9bfc917
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84201
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add SRIOV related definitions from section 9.3 of PCI Express Base
Specification Revision 6.2.
Change-Id: Ic4bf76b0e3b20e3d04e8264c6530ab4abb95a013
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83319
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Intel server processors have a different system agent design, it has
some differences with client platform such as (1) no BDSM and BGSM
registers; (2) different alignment size and bit fields in TOLUD,
TOUUD and TSEG registers. Thus this patch adds a new common block for
server platform system agent.
Change-Id: If32c2a6524c9d55ce7f9c3dd203bcf85cab76c2c
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83318
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds support for the Integrated Sensor Hub (ISH) on the
Fatcat mainboard.
ISH can be enabled or disabled via FW_CONFIG bit 24. This allows for
flexible configuration depending on the system requirements.
The GPIO configuration for ISH is also updated based on CBI settings,
ensuring correct initialization and communication.
Verified that the device tree correctly probes ISH based on the
FW_CONFIG setting:
* FW_CONFIG with bit 24 set: ISH is probed successfully.
* FW_CONFIG with bit 24 cleared: ISH is not probed.
BUG=b:370984186
TEST=Verified ISH probing behavior with different FW_CONFIG settings
using CBI.
Change-Id: I1a9734139a49be982a7dd43d5afd92e7fea6b29c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84998
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This updates power_limits_config for Panther Lake U and H.
Source:
Intel PTL PDG 813278
Intel PTL FSP Power limit profiles table
BUG=b:357011633
TEST=Build fatcat and boot with Panther Lake SoC and RVP.
Change-Id: I1b9276af7f1e30b1cda3d8c016524fd6397fa4b2
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85006
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
This patch adds new DID0 PCI device IDs for Intel PTL-H.
Additionally, updates the System Agent driver's `systemagent_ids`
list and Panther Lake SoC bootblock to support these new IDs.
Source: Intel PTL-FAS. Document Number 812562
BUG=b:347669091
TEST=Build fatcat and boot with Panther Lake SoC with newly added
MCH ID.
With patch, coreboot log:
`[DEBUG] MCH: device id b004 (rev 00) is Pantherlake H`
`[DEBUG] MCH: device id b00a (rev 00) is Pantherlake H`
Change-Id: I56e795696f661d88828d7549f856eee19c46c942
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84916
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
1. Configure ChromeOS EC
2. Pass GPIO_EC_AP_INT_ODL to the payload
TEST=build pass
BUG=b:317009620
Change-Id: I20828eee93975e75dfb777fe29d5e1c3454b5059
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84931
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Add SPI controller driver code with support for 8 buses (SPI0 to SPI7).
Test=Build pass, verify the wavefroms for SPI0~7 are correct.
BUG=b:317009620
Change-Id: I10dd1105931c4911ce5257803073b7af76115c75
Signed-off-by: Liya Li <ot_liya.li@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84930
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add PLL and clock init code, frequency meter and APIs for raising
little CPU frequency and set tvdpll frequency.
TEST=build pass and driver init ok
BUG=b:317009620
Signed-off-by: Guangjie Song <guangjie.song@mediatek.corp-partner.google.com>
Change-Id: Icac99fb210c87c8b7b14af627fbd2f14e4c47240
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84495
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Reduce stack usage of acpi_fill_srat_memory() by 18KiB.
Directly write the SRAT table entries instead of using a temporary
buffer on the stack.
FIXES: Crash on ocp/tiogapass when writing SRAT table
TEST: Still boots on intel/archercity_crb
Change-Id: I91a6787ade8b465da7837b241c0aab00251f7de4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84832
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When soc_acpi_name() returns NULL do not create the AML code.
This prevents errors on the OS side when it tries to parse the AML
code and doesn't find a name string for the device:
ACPI Warning: Invalid character(s) in name (0x44415F08), repaired: [*_AD]
Change-Id: I72225a975663a1028283437cac3b9231b7c77ead
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
In coreboot, LPC ACPI objects with its attached devices are
usually provided by static DSDT. For Xeon-SP Gen6 LPC, its logical
attached devices are created from dynamic SSDT (e.g. super IO).
Create a simple SSDT for LPC in dynamic way as well to complete
the device relationship chain.
Fix below issues during Linux OS boot. The issue will block
Windows OS boot as well.
[ 22.986142] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.DI00.LPCB], AE_NOT_FOUND (20230628/dswload2-162)
[ 22.986792] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230628/psobject-220)
[ 22.987786] ACPI: Skipping parse of AML opcode: Scope (0x0010)
Change-Id: I08543fc77f0f3e633b05889e921c5183e6e20d8e
Signed-off-by: Lu, Pen-ChunX <pen-chunx.lu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84842
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable IRQ routing per PCH IRQ usage convention and report domain
_PRT.
Change-Id: I095c7a302894437c90d854ce4e30467357eee2ba
Signed-off-by: Lu, Pen-ChunX <pen-chunx.lu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84328
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow the power team’s recommendation:
- Enable Acoustic noise mitigation
- Set slow slew rate VCCIA and VCCGT to SLEW_FAST_4
- Set FastPkgCRampDisable VCCIA and VCCGT to 1
BUG=b:376165743
TEST=built firmware and verified by power team,
the acoustic noise can be improved a lot.
Change-Id: Ia71985ef21d634763fc5ae22e4f611f7f5e9652a
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>
|
|
Realtek AX generation IC utilizes LTR-issued latency requests to
optimize WiFi latency and power consumption, it requires host
enabling LTR to meet the design requirement. We enabled the host's
LTR by enabling PCIe root port 8, which met resltek's technical
requirements.
BUG=b:377400590
TEST=Tested on Drawman with RTL8852BE
Use command $ lspci -vv, LTR+ is listed on DevCtl2
BRANCH=firmware-dedede-13606.B
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Change-Id: I093951f71e971fe83d61d9fcda8bf16cc5f82ffe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85011
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch addresses uninitialized usb_cfg pointer warning which is also
an error - src/soc/intel/meteorlake/fsp_params.c: error: 'usb_cfg' may
be used uninitialized in this function [-Werror=maybe-uninitialized]
BUG=None
TEST=./util/abuild/abuild for GOOGLE_HATCH, GOOGLE_VOLTEER, GOOGLE_KARIS
Change-Id: I169b6d3a979c4db78e7c0932a126d8b0a9306da7
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85026
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch introduces an API to check whether CSE is booting from
the RW slot.
This information can be used to determine if a CSE firmware update is
pending, which would help to optimize the boot flow by knowing if any
reset is expected due to CSE sync.
TEST=Able to build google/brox.
Change-Id: I1a63ae9992d83b439a0f995d599ee475f7abd75b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This patch introduces support for storing the MRC cache based on the
MRC version for RPL platforms. This patch selects the
MRC_CACHE_USING_MRC_VERSION option when client SOC_INTEL_RAPTORLAKE is
chosen.
BUG=b:281846937
TEST=Able to build and boot google/brox and verify MRC version in CBMEM.
Change-Id: I8adf519c7f27b30d69c19f1c37cf410ac8ae54db
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
A following patch that adds some support for reading the serial flash
discoverable parameters (SFDP) data structures needs to send more than
just the one command byte that 'spi_flash_cmd' supports. To be able to
do this, introduce the 'spi_flash_cmd_multi' function which supports
sending multiple bytes before reading back some bytes. The prototype is
added to drivers/spi/spi_flash_internal.h since only other files in the
same directory are supposed to be using that function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1f3872463249240c0a32e2825e4302894e856b2e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84789
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Call the PSP RPMC NVRAM 'PSP RPMC NVRAM' instead of 'PSP NVRAM' in the
debug console output to not be misleading, since the RPMC feature uses
the 'PSP_RPMC_NVRAM' fmap section and not the 'PSP_NVRAM' fmap section.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie89dfcfe4b8780f422c222477bb627e03bd3662d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85007
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Add a new Rauru follower 'Hylia'.
BRANCH=rauru
BUG=b:376357839
TEST=emerge-rauru coreboot chromeos-bootimage
Change-Id: I79c4525347fd7b1ecea6df05e1a6b726b78e946f
Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84924
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
- Boots Linux 6.11 (Debian)
- GRUB and SeaBIOS payloads work
- SMSC SCH5553 SIO/EC
+ Serial port works
+ PWM fan control works
- Realtek Gigabit LAN works
- WiFi slot works
- NVMe SSD slot works
- Extra: LPSS UART0
+ Stock FW sets undocumented power gating bit, RTC battery needs to
be pulled for it to work.
+ Signals exposed on test points on the back of the board.
FIXME: add documentation about this
- Needs 'deguard' to bypass BootGuard
+ See https://review.coreboot.org/admin/repos/deguard,general
- Audio works
- All USB ports work
- Currently limited to the Micro form factor, but others are very
similar
- HDA verbs and VBT by Leah Rowe
Change-Id: I8d443e39ee684a4eaa19c835a945cfe569c051e2
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82053
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
acpigen_write_PRT_pre_routed writes _PRT covering all direct
subordinate child devices based on interrupt line/pin info from
their PCI configuration spaces. It is required that IRQ routing
and PCI configuration space update to be done ahead of time.
TEST=Build and boot on intel/archercity CRB
Change-Id: Ic54888f76d2ec9804442bec5aec54267d9a16d7c
Signed-off-by: Lu, Pen-ChunX <pen-chunx.lu@intel.com>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82253
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
TEST=emerge-geralt coreboot
Change-Id: I9ee64677e9126789a07db1963a2c17a504cb4d9c
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84959
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rather than using a static array size for the `offset` variable, use a
pointer named `offsets` that points to a dynamically allocated array. A
separate variable called `offset_size` stores the size of this array.
TEST=emerge-corsola coreboot && emerge-geralt coreboot
Change-Id: I4b89c27fd693ee08e670c1a9ab4cbdbec220bee7
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84958
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
For ADL DIMM_MAX is a soc property and not a mainboard property.
Change-Id: I834b631ffb9b7b2272ec631122de61136e55651a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84207
Reviewed-by: Alicja Michalska <ahplka19@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Fn key on rull emits a scancode of 94 (0x5e).
BUG=b:372211281
TEST=Flash rull, boot to Linux kernel, and verify that KEY_FN is
generated when pressed using `evtest`.
Change-Id: Idb02d7013fa78233abff556bc6fa1d224c434338
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lei Cao <caolei6@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The previous method made cnvi wifi6 configuration cumbersome
and unusable. And delete unused pins. We abandoned the
fw_config judgment method and changed to the better rtd3.
BUG=b:374629673
BRANCH=None
TEST=1. emerge-nissa coreboot chromeos-bootimage
2. wifi7&wifi6 function is normal
Change-Id: Ia95dc9f6b707db63840de9b15b38bdaea48ea192
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85000
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jayvik Desai <jayvik@google.com>
|
|
Add Synaptics&PIXART init cpnfig, enable touchpad function
BUG=b:374629673
BRANCH=None
TEST=1. emerge-nissa coreboot chromeos-bootimage
2. touchpad function normal
Change-Id: Iacf09cd46d4a97fb79f91043c84452f76689462f
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84999
Reviewed-by: Lei Cao <caolei6@huaqin.corp-partner.google.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The previous GPIO config will cause the SSD device to not be recognized. Based on schematics NB7559_MB_SCH_V1_2024_1010.pdf. So we adjust the position of the enable and reset pins.
BUG=b:374629673
BRANCH=None
TEST=1. emerge-nissa coreboot chromeos-bootimage
2. power on proto board successfully
Change-Id: Idb36f67206450612655cb3efd3cce240475ef3ab
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This board is based off ga-b75m-d3h, which uses the same SuperIO chip.
It doesn't have the ASMedia SATA3 controller, the H77 chipset comes with
2 SATA3 ports next to the 4 SATA2 ports.
Flashing notes:
These boards come with dual-BIOS feature. This is set of two
unremovable what appears to be identical chips marked M_BIOS and
B_BIOS. Flash the B_BIOS chip, and boot the system. Ensure you have
a payload and setup ready to boot a Linux system with iomem=relaxed or
similar. Immediately use flashrom -p internal to flash the same
firmware again. If you skip this step your next boot will show weird
exception traces in either coreboot or your payload. Flashing from
there via the chip is very difficult (you have to try many times in
order to get a booting run), which can all be remedied by doing a
flash from internal. I suppose the dual-BIOS feature is somewhat in
the way here.
Tested with:
- CPU Core i7-3770S
- RAM single bank 4GB CL11, two banks 4+4GB CL11
- OS Gentoo Linux LiveUSB, KDE desktop (Linux 5.15.72)
Working:
- GRUB2 payload
- Intel ME stripped
- Integrated graphics with libgfxinit
- (boot from) SATA2, SATA3 ports
- Rear and mainboard connector USB ports, supporting boot
- Atheros GbE NIC
- 2.0 channel audio via lineout jack output
- ACPI (power button triggers OS events)
- S3 suspend/resume
- PWM FAN control, FAN speed readings
- Temperature sensor readings
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: Icb3e74326a0a7aaf770d1917a2a0931feadd7eab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77046
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ASRock IMB-1222 Intel Comet Lake-S Q470E industrial thin mini-ITX
motherboard [1].
Working:
- Dual Channel DDR4 2933/2666/2400 MHz;
- Intel UHD Graphics (VGA Option ROM, libgfxinit, GOP driver);
- DP (both), HDMI;
- PCIe x16 Slot (Gen3);
- SATA ports;
- USB 2.0 ports;
- USB 3.2 ports;
- M.2 Key-E 2230 slot for Wireless (PCIe x1, USB 2.0 and CNVi);
- M.2 Key-B 3042/3052 slot for 4G/5G modem (PCIe x1);
- M.2 Key-M 2242/2260/2280 for SSD/NVMe (PCIE x4, SATA3);
- LAN1 Intel I225LM/I225V, 10/100/1000/2500 Mbps;
- LAN2 Intel I219LM, 10/100/1000 Mbps;
- Realtek ALC887 HD Audio (line-out, mic-in);
- COM 1/2/3/4 ports;
- onboard speaker;
- HWM/FANs control (fintek f81966);
- S3 suspend and wake;
- TPM;
- disabling ME with me_cleaner [2];
Payload:
- Linux as payload;
- LinuxBoot;
- SeaBIOS;
- edk2 [3].
Bootable OS:
- Ubuntu 22.04 (Linux 6.5.0-15-generic);
- Ubuntu 24.04 (Linux 6.8.0-41-generic);
- Microsoft Windows 10 Pro (10.0.19045.4780, 22H2 2022);
- Andoid 13, Bliss OS x86_64 (16.9.7, Linux 6.1.112-gloria-xanmod1).
Unknown/untested:
- USB3.0 in M.2 Key-B 3042/3052 slot;
- eDP/LVDS;
- PCIe riser cards;
- SPDIF.
There is no schematic/boardview, reverse engineering only.
This port is based on system76/bonw14 because it has a similar topology.
[1] https://web.archive.org/web/20220924171403/https://
www.asrockind.com/en-gb/IMB-1222
[2] XutaxKamay's me_cleaner fork,
https://github.com/XutaxKamay/me_cleaner, v1.2-9-gf20532d
[3] MrChromebox's edk2 fork, https://github.com/mrchromebox/edk2
uefipayload_2408 branch
Change-Id: Id2b4c903546f9174b5e7dd26e54a0c5aaa09e1f8
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83107
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch addresses uninitialized usb_cfg pointer warning which is also
an error - src/soc/intel/alderlake/fsp_params.c:936:48: error: 'usb_cfg'
may be used uninitialized in this function [-Werror=maybe-uninitialized]
BUG=None
TEST=./util/abuild/abuild
Change-Id: I764fed561dfe2a571f3404fe505997edd7aa5ff7
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84939
Reviewed-by: Jayvik Desai <jayvik@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for the mainboard to check for any potential firmware
component update and hence the assosicated reset. This indication can be
used to avoid any redundant resets during the boot flow.
BUG=b:375444631
TEST=Build Brox BIOS image and boot to OS. Ensure that the hints are
provided correctly and 2 redundant resets are filtered out.
Change-Id: Ieed3f9013dee9aa501a3f0403f3a28722a3878f1
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84937
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
An unintended suffix got added in google_chromeec_get_pd_chip_info. Fix
the typo by removing that suffix.
BUG=None
TEST=Build Brox BIOS image and boot to OS.
Change-Id: I76048ec1ed6b4387098fecf35ccc5b1c1742abb0
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch reduces PL4 only for no battery condition i.e. when battery
is disconnected or not physically present.
BUG=b:377305625
TEST=Build Brox and boot when the battery is disconnected
Change-Id: I59a1028ce9cd3a6cf98f865d9c085a64f391f201
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This patch is to add FspProducerDataHeader.h header file to support MRC
version Info in RPL.
BUG=b:281846937
TEST=Able to build and boot google/brox.
Change-Id: Iaf7983fbe8f103d9f51065cd160177e2bde7fd3d
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84723
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
RPL FSP v5311 uses 202305 Edk2. Select UDK_202305_BINDING Kconfig for
RPL SoC.
BUG=b:281846937
TEST=Able to build and boot google/brox.
Change-Id: I8dcc7d85cddadcce148ded5a81658253e8598413
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84722
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jayvik Desai <jayvik@google.com>
|
|
Add edk2-stable202305 support for MTL and RPL FSPs.
This patch includes (edk2/edk2-stable202302) all required
headers for edk2-stable202302 EDK2 tag from EDK2 github
project using below command:
git clone -b edk2-stable202305 https://github.com/tianocore/edk2.git
commit hash: ba91d0292e593df8528b66f99c1b0b14fadc8e16
Only include necessary header files.
MdePkg/Include/Base.h was updated to avoid compilation errors
through safeguarding definitions for MIN, MAX, NULL, ABS, ARRAY_SIZE.
Add following fixes from older Edk2
060492ecd2 Safe guard enum macro in SmBios.h
2bf9599cf1 Use fixed size struct elements
cf4c6fd225 Remove FSPM_ARCH_UPD config guard
dc781d3a83 Define FSP_SIG macro for FSP 2.x compatibility
d045074b91 Remove wchar_t asserts
Change-Id: I96f0d0e393d31b325f9e42e3494556a2f6e1228e
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Realtek AX generation IC utilizes LTR-issued latency requests to
optimize WiFi latency and power consumption, it requires host
enabling LTR to meet the design requirement. We enabled the host's
LTR by enabling PCIe root port 8, which met resltek's technical
requirements.
BUG=b:366383364
TEST=Tested on Awasuki with RTL8852BE
Use command $ lspci -vv, LTR+ is listed on DevCtl2
Change-Id: I0c80f89b4fdb52a5d9da17548537072ec2d40418
Signed-off-by: Hualin Wei <weihualin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Reserve Root Port LTR mechanism in FSP, in case some devices
need to optimize LTR.
BUG=366383364
TEST=Tested on Awasuki with RTL8852BE
use lspci -xxx to get PCIE config space dump, and LTR Mechanism Enable
bit is offset 68h[10].
00:1c.0 PCI bridge: Intel Corporation Device 4dbf (rev 01)
00: 86 80 bf 4d 07 05 10 00 01 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 20 20 00 20
20: c0 7f c0 7f f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 04 12 00
40: 10 80 42 01 00 80 00 00 00 00 10 00 13 4c 72 08
50: 43 00 11 70 00 b2 3c 00 00 00 40 01 08 00 00 00
60: 00 00 00 00 37 08 00 00 00 04 00 00 0e 00 00 00
70: 03 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 38 02 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 86 80 bf 4d 00 00 00 00 00 00 00 00
a0: 01 00 03 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 10 00 07 42 18 01 40 08 00 9e 09 00 00 00 00
e0: 00 03 e3 00 00 00 00 00 16 00 10 00 00 00 00 00
f0: 50 01 00 00 00 00 00 4c b5 0f 02 01 04 00 00 84
Change-Id: I85e50b01cc9fb5522d457cfce3700b7c85d7012f
Signed-off-by: Lawrence Chang <lawrence.chang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84866
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: David Ruth <druth@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ext_vr_update should be run after board version 0xb, but skipped by
return. Drawper LTE board version was set after 0x9, but there are more
board added after that. Specific Drawper board version as 0xa, 0xb and
0xf.
BUG=b:376828839
BRANCH=firmware-dedede-13606.B
TEST=emerge-dedede coreboot chromeos-bootimage and test on DUTs.
Change-Id: I13f4709b6f490169f69054cf2b26430b4de0746a
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
This patch removes the SOC_INTEL_GFX_MBUS_JOIN configuration option.
Support for fast modeset joining has been added to the mainline i915
kernel driver (https://patchwork.freedesktop.org/series/130480/),
making this coreboot-specific workaround unnecessary.
BUG=b:291885733
TEST=Successful build and boot of google/screebo with single and dual
displays, no redundant boot splash.
Change-Id: Ifb0416df53a453ce16815f9fd52ec6b53fade5e2
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81034
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Paz Zcharya <pazz@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This was found due to the `_Static_assert()` from CB:84360 failing.
As I do not own this board, I cannot test whether is change is
"functionally correct". However, I believe it is more likely that the
original authors forgot to update the verb table size, rather than them
adding additional verb data which was not meant to be used.
TEST=`_Static_assert()` mentioned above does not fail anymore.
Change-Id: I8df44e056bc841bfb344749ba214e6fb71a1955b
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84487
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Add DB_1C_LTE 4 on DB_USB fw_config.
2. Implement WWAN power sequencing.
3. Disable LTE-related GPIOs based on fw_config.
4. Add I2C SX9324 (P-sensor) support.
Refer Schematic file: CA31AC_R10_MB_SUB_240903A_P.pdf
BUG=b:374666995
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Confirm the device node i2c-STH9324:00 created correctly,
and command for # i2cdump -f -y 11 0x28 is workable.
Change-Id: Ida56ff338d82f48aef419a65830a3380c83123d5
Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84925
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Irq2axi translates wire-based interrupt into message signal interrupt.
Since MT8196 uses legacy wire-based interrupt, this feature needs to be
disabled. If the interrupt is not handled, it will cause the system fail
to boot.
TEST=Build pass, check irq2axi_disable log and the interrupt can be
correctly handled by checking /proc/interrupts.
BUG=b:317009620
Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com>
Change-Id: I0e89a0ee75e574a4b9e8df0a0f6a5f6e03bba2d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84896
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The boot time is improved by 58ms in bootblock. (78ms -> 20m)
BUG=b:361729697
TEST=check cbmem
Change-Id: I27ce378ba8e3744cfb3921835e34b32bbba991cb
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84897
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
De-assert PERST# at romstage to reduce the waiting time in ramstage.
BUG=b:361728592
TEST=The boot time improves 62ms
Change-Id: I2cd5cd59e7513b6e4036c3e8013a3c7322d2f787
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84895
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Looking at Intel document 759603 revision 001, Alder Lake N only has 5
PCIe clock outputs and clock request pins. I only have the version 2 of
this board which has a significantly different USB port configuration to
version 1, but there the Ethernet controller on RP 11 and the E key m.2
slot on RP 12 share the last PCIe clock output. The on-board TUBF0304
clock buffer chip takes the clock output form the last PCH PCIe clock
generator output and drives the clock inputs of both the last Ethernet
chip and the E key m.2 slot. Since the last clock output is always
active, since RP 11 has the PCIE_RP_CLK_REQ_UNUSED flag set, using the
non-existent clock output and request for RP 12 didn't break things.
ASPM L0s might still work though, since that one doesn't involve
switching off the PCIe reference clock, but haven't tested that yet.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I103f7c3fe0b806f5c0a5202b8221f522a4b1c378
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83911
Reviewed-by: coreboot org <coreboot.org@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It may come with 8th or 9th Gen CPUs. i5-8500T has been tested here.
Works:
- Serial adapter from daughter board (COM1 connector)
- USB ports front and back
- USB-C port (charging, data)
- HDMI
- Ethernet
- SATA
- NVMe
- internal speaker
- TPM2.0
- PCIe x8 port (x8 riser tested, x4 not)
Does not work:
- front audio jacks
Change-Id: Iea1dc5745c0ecf687fa18b793f0aab4b0855d6d4
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80609
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the functions that call 'spi_controller_available' end up checking
if the SPI controller is busy, refactor the function into
'spi_controller_busy' to simplify the logic on the caller's side. Also
move printing of the notice that the SPI controller is busy to
'spi_controller_busy' to not have that duplicated in caller.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibc21ab6eacf07c4adffdb4658142c2f9dfcbf2a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84920
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the RPMC-related functions will only need the spi_flash struct,
but not the region_device struct of the store region corresponding to
the 'target_nv_id', factor out 'get_flash_device' from
'find_psp_spi_flash_device_region'.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia99d3454df2c1c4182c193da7de1bbb4eef18313
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84905
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ana Carolina Cabral
|
|
Disable UFS controllers during romstage initialization only when
resuming from S5 (full power off).
On warm reboot, the UFS controllers are already disabled by the
previous boot cycle, so disabling them again is unnecessary.
TEST=Able to ensure UFS controller is already disabled in warm reboot
path and not causing any problem during S0ix cycle test.
Change-Id: Ia27d2156a002cef032d5f57d212cf4eb520b3bdf
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jayvik Desai <jayvik@google.com>
|
|
Disable the `FSP_UGOP_EARLY_SIGN_OF_LIFE` option (eSOL) for the
Ovis baseboard.
eSOL currently only supports display output over eDP and HDMI.
Ovis/Deku exclusively use Type-C for display, and eSOL cannot render
output over Type-C during early boot because it depends on Type-C
firmware loaded in a later stage.
TEST=Able to build and boot google/deku.
Change-Id: I5ddbd340f667b1631a42d130a793f0b1831aa0ba
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
1. Extend 1 bit [34] for the TOUCHSCREEN_SOURCE.
SSFC range for TOUCHSCREEN_SOURCE is bit[32:34].
2. Touchscreen panel: MUTTO A153728S1Y,
and set TOUCHSCREEN_ILIT2901 to value "4"
3. Datasheet: #153728S1V1.0 SPEC_20240923.pdf
BUG=b:375986645
BRANCH=firmware-nissa-15217.B
TEST=1. emerge-nissa coreboot chromeos-bootimage
2. Confirm command evtest and touchscreen function is workable.
Change-Id: I6e13c948edca5a894e1a00a1954f0f88c4a079cf
Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84894
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add API to get Power Delivery (PD) Chip info which includes vendor ID,
product ID and firmware version(if any).
BUG=None
TEST=Build Brox BIOS image and boot to OS.
Change-Id: I4cc4493ac64d44076877fee633488c95cd09807e
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
commit 6c83a71b0a80 ("skl mainboards/dt: Move usb{2,3}_ports settings
into XHCI device scope") not only moved the USB port definitions under
the XHCI device reference, but also combined multiple register
definitions. In doing so, it broke the inheritance from the baseboard,
since the variant overridetree registers now replaced the entire
usb2_ports/usb3_ports structs, rather than replacing individual array
elements therein. This resulted in any USB ports inherited from the
baseboard and not overridden by the variant being non-functional as they
were not included in the resulting combined devicetree.
To fix this, return to overriding individual array elements in the
usb2/3_ports structs.
TEST=build/boot google/fizz/var/karma. Verify all USB ports present and
functional. Verify mainboard/static.c in built shows all ports.
Change-Id: I0e80bf4949a857c21d44537eb720a7a8a7db2f80
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84955
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch configures the ESPI_SOC_ALERT_L GPIO pad on fatcat as
NC to enable S0ix low power entry.
TEST=Build fatcat and check the platform boots without an issue.
Change-Id: Icb80a56177105c0281d05fe1f5daa87e6f7e291f
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84957
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
|
|
Package C-state auto demotion feature allows hardware to determine lower
C-state as per platform policy. Since platform sets performance policy
to balanced from hardware, auto demotion can be disabled without
performance impact.
TEST=Build fatcat and check the platform boots without an issue.
Change-Id: I01f2cb8ac1093ae98cc076e35ad1924baa53aa59
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch adds is_battery_present() to check if the
battery is physically present
BUG=b:335046538,b:329722827
TEST=Build Brox and check is_battery_present
returns the correct battery status.
Change-Id: Ie49ed8f6d8b0fa59ec0e7b06efea9cac4d253957
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83735
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
1. Modify the I2C frequency of the touchpad between 380 Khz and
400 Khz to meet the spec.
2. Increase clk the time of high (TH) to greater than 600ns.
Before:
I2C0 - 420KHz
TH - 557ns
After:
I2C0 - 398Khz
TH - 630ns
BUG=b:351968527
TEST=Check that the wave form meets the spec.
Change-Id: I5ccaa3a669e18319311de14833966410c7adf40d
Signed-off-by: Hualin Wei <weihualin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84898
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
|
|
Add Micron part MT62F2G32D4DS-020 WT:F only for Francka.
DRAM Part Name ID to assign
MT62F2G32D4DS-020 WT:F 0 (0000)
BUG=b:373394046
TEST=emerge-fatcat coreboot
Change-Id: I2de56c8c7a028edefbd3dc53f8b1e26dee3286f7
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84781
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The size of the inner array of the 2-dimensional array pad_funcs should
be 4 instead of SPI_BUS_NUMBER (6). This bug leads to two extra
gpio_set_mode() calls with unexpected GPIOs.
Inspecting spi.o, the data immediately after the .rodata.pad_funcs
section is .rodata.spi_ctrlr_bus_map, with the following data:
00000428 00 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00
00000438 00 00 00 00 00 00 00 00 ...
This is equivalent to the following calls:
gpio_set_mode(GPIO(GPIO05), 0);
gpio_set_mode(GPIO(GPIO00), 0);
The second call is already included in the pad_funcs array, so the first
call is the only practical impact of this bug.
Change-Id: I9c44f09b3cdadbbf039b95efca7144f213672092
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
If the mainboard expects upcoming reset, then skip the reset after
disabling UFS. This will reduce the number of resets during firmware
update.
BUG=b:375444631
TEST=Build Brox BIOS image and boot to OS. Perform a firmware update and
confirm that the number of reset is reduced by 2 resets.
Change-Id: I4399555302ec23a76f89f406f437f311eea0ef99
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84935
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Update device tree to support speaker o/p on MAX98357A AIC.
BUG=b:357011633
TEST=build coreboot image and test audio playback on Google/Fatcat board.
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: I20de87f673e947f0e2332b818ebca01c0fa5e200
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84888
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Select SOC_INTEL_RAPTORLAKE to force coreboot to use the RPL FSP
headers for FSP as banshee is using a converged firmware image.
This effort also helps to save banshee boot time by 80-100ms as
RPL FSP is better optimized.
Additionally, Raptor Lake platform only needs 1 SIPI-SIPI which
saves 10ms of the boot time.
BUG=b:358254132
TEST=Able to build and boot google/banshee.
cold boot time w/o this CL
```
Total Time: 1,399,888
```
cold boot time w/ this CL
```
Total Time: 1,295,334
```
Change-Id: If22e07a4c1b35fe1d060ca523743c6c503937287
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
From power team's recommendation, increase the VccIn Aux Imon IccMax
to 30A to meet HW settings.
BUG=b:376306118
TEST=Build firmware and check the value is changing as expected.
Paste the firmware log.
[SPEW ] VccInAuxImonIccImax= 0x78
[SPEW ] (MAILBOX) VccInAuxImonIccImax = 120 (1/4 Amp)
[INFO ] Override VccInAuxImonIccImax = 120
Change-Id: I71020c2f631cb517a52d4bb65e35277eb731ced7
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
According to the PCIe CEM specification, the deassertion of PERST#
should occur at least 100ms after the assertion. Right now we simply
wait for 100ms in ramstage for that.
To speed up the boot time, pre-initialize PCIe by asserting PERST#
earlier in the bootblock stage. The pre-initialization time is stored
in the early init data region, so that the PCIe initialization in
ramstage could make sure the required 100ms delay is still reached.
This pre-initialization will speed up the boot time by 100ms on rauru.
TEST=Build pass, show pcie init pass log:
mtk_pcie_domain_enable: PCIe link up success (1)
BUG=b:317009620
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: I2b84c25ae3ea9069fd38fa6b20b8235a7fc3a484
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
We want to configure different VBT timings for panels of different sizes
and distinguish them through SSFC. We select the reserved bit 6 of SSFC
as the flag bit. When using a 12-inch panel, set this bit to 0; when
using an 11-inch panel, set this bit to 1.
Without splitting, the platform_BootPerf test will fail.
BUG=b:374428465
TEST=
1. can match VBT with SSFC
-When SSFC is set to 0x40:
$ cat /sys/firmware/log | grep vbt
Bit 6 of SSFC is 1, use vbt-teliks_panel_11_inch.bin
CBFS: Found 'vbt-teliks_panel_11_inch.bin' @0x1c6140 size 0x50f in mcache @0x76adda14
-When SSFC is set to 0x0:
$ cat /sys/firmware/log | grep vbt
Bit 6 of SSFC is 0, use vbt-teliks.bin
CBFS: Found 'vbt-teliks.bin' @0x1c5bc0 size 0x50e in mcache @0x76add9b0
2. can pass platform_BootPerf test
The platform_BootPerf time measured for all SKUs is less than 1.55s.
Change-Id: Ia8fb45aede5ead4826d983760506c366a70643ee
Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84871
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This commit adjusts the EC host command range for the Fatcat board to
0x800-0x807 & 0x200-0x20f.
This change is necessary because the microchip EC used on the Fatcat
board has a smaller host command range than the ITE/Nuvoton ECs used
on other Fatcat variants.
The `gen1_dec` register in the devicetree is updated to reflect this
change.
As per boot log, the `gen1_dec` aka offset 0x84, base address is 800
and size is 8 bytes.
AP FW Boot log:
[SPEW] PCI: 00:00:1f.0 resource base 800 size 8 align 0 gran 0 limit 0 flags c0000100 index 84
BUG=b:376207365
TEST=Able to build and boot google/fatcat w/o any error.
without this patch:
[SPEW ] LPC: Trying to open IO window from 800 size 8
[ERROR] LPC: Cannot open IO window: 800 size 8
[ERROR] No more IO windows
with this patch:
[SPEW ] LPC: Trying to open IO window from 800 size 8
Change-Id: Ifcee533341fa583d841a4b564f25831c6d04e951
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84919
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
|
|
This patch implements the `save_dimm_info()` API to populate and pass
DRAM-related information to the next stage. This information
is used to generate the SMBIOS memory table, providing details about
installed DIMMs.
This addresses the issue where SMBIOS lacked detailed DIMM information.
Verified that `dmidecode` correctly dumps the DIMM information from the
SMBIOS table after this change.
BUG=b:376103463
TEST=Built and booted successfully. Verified DIMM info in SMBIOS using
`dmidecode`.
> dmidecode -t 17
```
Getting SMBIOS data from sysfs.
SMBIOS 3.0 present.
Handle 0x000B, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: Not Provided
Total Width: 16 bits
Data Width: 16 bits
Size: 2 GB
Form Factor: Row Of Chips
Set: None
Locator: Channel-0-DIMM-0
Bank Locator: BANK 0
Type: LPDDR5
Type Detail: Unknown Synchronous
Speed: 6400 MT/s
Manufacturer: Hynix
Serial Number: 00000000
Asset Tag: Channel-0-DIMM-0-AssetTag
Part Number: H58G56BK7BX068
Rank: 1
Configured Memory Speed: 6400 MT/s
Minimum Voltage: 0.5 V
Maximum Voltage: 0.5 V
Configured Voltage: 0.5 V
...
...
Handle 0x0012, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: Not Provided
Total Width: 16 bits
Data Width: 16 bits
Size: 2 GB
Form Factor: Row Of Chips
Set: None
Locator: Channel-3-DIMM-0
Bank Locator: BANK 0
Type: LPDDR5
Type Detail: Unknown Synchronous
Speed: 6400 MT/s
Manufacturer: Hynix
Serial Number: 00000000
Asset Tag: Channel-3-DIMM-0-AssetTag
Part Number: H58G56BK7BX068
Rank: 1
Configured Memory Speed: 6400 MT/s
Minimum Voltage: 0.5 V
Maximum Voltage: 0.5 V
Configured Voltage: 0.5 V
```
Change-Id: I3b942610272de401589ee0463de9cd0985974774
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch adds ACPI names for the following devices:
- THC0 (PCI: 00:10.0)
- THC1 (PCI: 00:10.1)
- SRAM (PCI: 00:14.2)
- FSPI (PCI: 00:1f.5)
TEST=Able to build and boot google/fatcat without any error.
w/o this patch:
[ERROR] Missing ACPI Name for PCI: 00:10.0
[ERROR] Missing ACPI Name for PCI: 00:10.1
[ERROR] Missing ACPI Name for PCI: 00:14.2
[ERROR] Missing ACPI Name for PCI: 00:1f.5
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I474089607522a4bd13375cc34b8f8645ca3663d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84910
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This change sets the SMBUS device to min sleep state D0 in the ACPI
sleep state table.
TEST=Able to build and boot google/fatcat.
w/o this patch:
[WARN ] Unknown min d_state for PCI: 00:1f.4
w/ this patch:
No Error or Warning.
Change-Id: If84d2ee8abfef34f6411e01e6c37d4e2008a3666
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84909
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit defines the EC_SYNC_IRQ and GPIO_PCH_WP macros for
different Fatcat variants.
The EC_SYNC_IRQ macro is used for tight timestamps and wake support,
while the GPIO_PCH_WP macro is used for the WP signal to the PCH.
These macros were previously undefined or incorrectly defined for some
variants. This commit fixes these issues and ensures that the macros
are defined correctly for all variants.
Specifically, this commit:
- Defines EC_SYNC_IRQ and GPIO_PCH_WP for Fatcat Nuvo and Fatcat ITE.
- Defines EC_SYNC_IRQ as 0 (not connected) for Fatcat.
- Defines GPIO_PCH_WP as GPP_D02 for Fatcat.
- Leaves EC_SYNC_IRQ and GPIO_PCH_WP as 0 (TODO) for Francka.
TEST=Able to build and boot google/fatcat.
w/o this patch:
```
cros_ec_lpcs GOOG0004:00: couldn't retrieve IRQ number (-22)
cros_ec_lpcs GOOG0004:00: probe with driver cros_ec_lpcs failed with error -22
```
w/ this patch:
```
cros_ec_lpcs GOOG0004:00: Chrome EC device registered
```
Change-Id: I9bd248496f08869c08cf6daafeed6584d0b166b7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
This patch updates the flash map layout to guarantee that the
RW_SECTION_B section starts at the 16MB boundary.
Additionally, fix typo in flash descriptor comment, where comment
incorrectly referred to "MTL" instead of "PTL".
TEST=Successfully builds google/fatcat.
Change-Id: Ia6dba611fba50f9694a75670d954a4630cde4d70
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84899
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This to fix the error when using C23:
cannot cast an object of type 'nullptr_t' to 'uintptr_t' (aka 'unsigned long')
return (uintptr_t)NULL;
^
Change-Id: Ibdc8794513a508fc61a5046692f854183c36b781
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Use the resource size to determine Vtd BAR size and drop the code to
calculate the Vtd BAR size.
While on it do not truncate the resource address to 32-bit, since the
DMAR entry is 64-bit wide anyway.
TEST: Booted on intel/archercity_crb
Change-Id: Ibaadc25c44345ba2eb9e6f75989d32b43d00d7a5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Align DSDT names with SSDT naming scheme, as provided by
iio_domain_set_acpi_name() and hide unused devices by implementing
the _STA method as done on newer platforms.
Change-Id: I8488907f28a78a6f71046dba54ba9cbd4b0652eb
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Get rid of some helper functions by properly using a pci_driver.
Configure SAD if necessary and lock SAD if necessary in the newly added
SAD PCI driver. This allows to drop lock_pam0123(), unlock_pam_regions()
and socket0_get_ubox_busno().
- Fixes SAD instance on secondary sockets not decoding the C-F segments
as DRAM, which would prevent those sockets to access the ACPI/SMBIOS
table anchor
- Adds PCI multi segment support
(SKX and CPX only, other were working properly already)
- Moves locking of PAM0123_CSR and PAM456_CSR from SoC to driver code
Change-Id: I167b6ce48631fe3f97359ee33704f52ca854dbd1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84794
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set characteristics 1 based on slot type and scan PCI capabilities
to update the characteristics 2 field in SMBIOS type 9 accordingly.
Change-Id: If96e0381b10c25cf73b3797a0f02a40dc933993e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
|
|
Add a helper method to read the PME capability.
Will be used in the following commit.
Change-Id: Id1fdc98c9ce86d3ddf8056bb609afc58008cf2e9
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84793
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add the code to request the provisioning of the RPMC root key from the
PSP. When RPMC hasn't already been provisioned enabled and the PSP has
detected a SPI flash chip that both supports RPMC and has monotonic
counters that can still be provisioned, we send the PSP mailbox command
to request the RPMC provisioning and then reset the system, so the PSP
can do the actual provisioning.
TEST=On an out of tree AMD reference board using the Cezanne SoC code,
provisioning RPMC works as expected when selecting the corresponding
PERFORM_RPMC_PROVISIONING Kconfig option:
1st boot to initiate the RPMC provisioning:
[DEBUG] PSP: Querying PSP capabilities...OK
[DEBUG] PSP: Querying HSTI state...OK
[SPEW ] RPMC isn't provisioned
[SPEW ] SPI flash supports RPMC
[SPEW ] RPMC revision 0
[SPEW ] PSP NVRAM isn't healthy
[SPEW ] PSP NVRAM is using RPMC protection
[SPEW ] SPI flash RPMC counter 0 can still be provisioned
[SPEW ] SPI flash RPMC counter 1 can still be provisioned
[SPEW ] SPI flash RPMC counter 2 can still be provisioned
[SPEW ] SPI flash RPMC counter 3 can still be provisioned
[SPEW ] SPI flash RPMC counter 0 is in use
[SPEW ] SPI flash RPMC counter 1 is not in use
[SPEW ] SPI flash RPMC counter 2 is not in use
[SPEW ] SPI flash RPMC counter 3 is not in use
[SPEW ] SoC RPMC slot 0 can still be provisioned
[SPEW ] SoC RPMC slot 1 can still be provisioned
[SPEW ] SoC RPMC slot 2 can still be provisioned
[SPEW ] SoC RPMC slot 3 can still be provisioned
[DEBUG] RPMC: perform fusing using RPMC counter address 0
[DEBUG] OK
[NOTE ] RPMC: Rebooting
[INFO ] warm_reset() called!
2nd boot after the provisioning is done:
[DEBUG] PSP: Querying PSP capabilities...OK
[DEBUG] PSP: Querying HSTI state...OK
[SPEW ] RPMC is provisioned
[SPEW ] SPI flash supports RPMC
[SPEW ] RPMC revision 0
[SPEW ] PSP NVRAM isn't healthy
[SPEW ] PSP NVRAM is using RPMC protection
[SPEW ] SPI flash RPMC counter 0 has already been provisioned
[SPEW ] SPI flash RPMC counter 1 can still be provisioned
[SPEW ] SPI flash RPMC counter 2 can still be provisioned
[SPEW ] SPI flash RPMC counter 3 can still be provisioned
[SPEW ] SPI flash RPMC counter 0 is in use
[SPEW ] SPI flash RPMC counter 1 is not in use
[SPEW ] SPI flash RPMC counter 2 is not in use
[SPEW ] SPI flash RPMC counter 3 is not in use
[SPEW ] SoC RPMC slot 0 has already been provisioned
[SPEW ] SoC RPMC slot 1 can still be provisioned
[SPEW ] SoC RPMC slot 2 can still be provisioned
[SPEW ] SoC RPMC slot 3 can still be provisioned
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia7760c0bf7618ca60ef160329d0110ac8109032a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84707
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the code to query the status of the replay-protected monotonic
counter (RPMC) infrastructure from the PSP and display it in a decoded
form.
Certain SPI flash chips have 4 32-bit monotonic counters in addition to
the actual flash storage. During the RPMC root key provisioning process,
which is done at the end of manufacturing, a 256 bit RPMC root key is
generated by the PSP and programmed into both SoC fuses and the RPMC SPI
flash chip. After that, commands to read or increment the monotonic
counters can be sent to the SPI flash which are protected by a
HMAC-SHA-256 signature using a key derived from the provisioned RPMC
root key.
The code to do the RPMC provisioning is added in a follow-up patch.
TEST=On an out of tree AMD reference board using the Cezanne SoC code
and with the SOC_AMD_COMMON_BLOCK_PSP_RPMC Kconfig option selected, the
newly added code prints this on the console after the provisioning was
done:
[DEBUG] PSP: Querying PSP capabilities...OK
[DEBUG] PSP: Querying HSTI state...OK
[SPEW ] RPMC is provisioned
[SPEW ] SPI flash supports RPMC
[SPEW ] RPMC revision 0
[SPEW ] PSP NVRAM isn't healthy
[SPEW ] PSP NVRAM is using RPMC protection
[SPEW ] SPI flash RPMC counter 0 has already been provisioned
[SPEW ] SPI flash RPMC counter 1 can still be provisioned
[SPEW ] SPI flash RPMC counter 2 can still be provisioned
[SPEW ] SPI flash RPMC counter 3 can still be provisioned
[SPEW ] SPI flash RPMC counter 0 is in use
[SPEW ] SPI flash RPMC counter 1 is not in use
[SPEW ] SPI flash RPMC counter 2 is not in use
[SPEW ] SPI flash RPMC counter 3 is not in use
[SPEW ] SoC RPMC slot 0 has already been provisioned
[SPEW ] SoC RPMC slot 1 can still be provisioned
[SPEW ] SoC RPMC slot 2 can still be provisioned
[SPEW ] SoC RPMC slot 3 can still be provisioned
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I498eec58189da710b725ac6575c68ba7ab0bcc43
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84706
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The functions psp_get_ftpm_capabilties, psp_get_hsti_state, and
psp_get_psp_capabilities which were added in commit 5e7ab1a23346
("soc/amd/common/psp: add helper functions to retrieve capability bits")
have a bug in the 'cmd_status' error handling logic. In case of an
error, 'cmd_status' is non-zero, while the check somehow expected the
opposite. Fix the bug by returning an error if 'cmd_status' is non-zero.
Change-Id: Iafcd185ec4a8a4c0e463b0ac5bac3ef78a0af305
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84836
Reviewed-by: Ana Carolina Cabral
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
When creating variant, it was copied from teliks, and according to the requirements of telith project, update the override devicetree to use ELAN touchscreen.
BUG=b:373510302
BRANCH=None
TEST=1. emerge-nissa coreboot chromeos-bootimage
2. power on proto board successfully
3. touchscreen is functional
Change-Id: If0da85a38f3a68b6f50cfd096a628174b313fcc9
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84865
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Create the rull variant of the nissa reference board by copying
the template files to a new directory named for the variant.
And based on schematics NB7559_MB_SCH_V1_2024_1010.pdf
update devicetree settings.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0)
BUG=b:374673463
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_RULL
Change-Id: If48273f3e9db69507b41ea0313916d94ecabe309
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84828
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This change enables the integrated GPU (iGPU) display on the Fatcat
board based on the FW_CONFIG setting (specifically the DISPLAY bit).
By conditionally probing the display based on FW_CONFIG, the iGPU
is dynamically enabled or disabled according to the SKU configuration.
TEST=Verified display functionality on Fatcat with the iGPU:
> cbi set 6 0x58A814 4 (DISPLAY_ABSENT):
- lspci does not list the iGPU.
- No display output, but the device boots to the OS (verified via
console).
> cbi set 6 0x5CA814 4 (DISPLAY_PRESENT):
- lspci lists the iGPU.
- Display output is functional, showing firmware and OS UI.
Change-Id: I5762adf5ec8a86a00c16544670cb2f998055bd35
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84877
Reviewed-by: Jayvik Desai <jayvik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The iGPU device is enabled by default in the Pantherlake chipset
configuration. Remove the redundant device entry in the Fatcat
devicetree.
This change ensures that the iGPU remains enabled without explicit
configuration in the board-specific devicetree.
TEST=Able to build google/fatcat and able to see firmware and OS
display/UI.
Change-Id: I9a2ec9b47acb389f5bb6b30e61352aaefa327328
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84876
Reviewed-by: Jayvik Desai <jayvik@google.com>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Add PCIe domain support.
TEST=Build pass, show pcie init pass log:
mtk_pcie_domain_enable: PCIe link up success (1)
BUG=b:317009620
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: I3e06dfaf79924cd5352348afaa526fc7dedbb540
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84700
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable PCIe support for mt8196.
TEST=Build pass, show pcie init pass log:
mtk_pcie_domain_enable: PCIe link up success (1)
BUG=b:317009620
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: I9c0aaa1c6da8c247b319e7ed2317dd871e276461
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84698
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a trivial mainboard_needs_pcie_init implementation that always
return true. For now, the storage types of rauru SKUs are still unknown.
TEST=Build pass, show pcie init pass log:
mtk_pcie_domain_enable: PCIe link up success (1)
BUG=b:317009620
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: I6b4f08e15f62da18aa37226075894f2827a9e7ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84697
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add PCIe driver for MT8196 platform.
According to the PCIe CEM specification, the deassertion of PERST#
should occur at least 100ms after the assertion. To ensure the 100ms
delay requirement is met and to save delay time in the ramstage, add
an early init data region to store the elapsed time since assertion.
This will speed up the boot time by 100ms.
PCIe port 1 and port 2 share the same PCIe resources, but PCIe port 2 is
not used. Therefore, in mtk_pcie_pre_init(), make sure PCIe port 2 is
reset to prevent interference with PCIe port 1.
TEST=Build pass, show pcie init pass log:
mtk_pcie_domain_enable: PCIe link up success (1)
BUG=b:317009620
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: I826a96822e88972bcd4966b6681797a646adf3d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
To reduce duplicate pcie.h in other SOC folder, mocw pcie.h to
mediatek/common folder
TEST=Build pass
BUG=b:317009620
Change-Id: I8e29ed4027433700652b07b3461eeb8546d45c9b
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
This code is never reached since the hardware uses different SoCs.
Besides, mainboard specific code should not be added to SoC code.
Change-Id: Id82d5d0b829442c35c093974c06a029259838a9a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This commit improves the debug messages when initializing SPI flash
windows by adding the window type (Fixed Decode or Extended Decode)
to the log output.
This makes it easier to understand which window is being initialized
and can help with debugging issues related to SPI flash access.
w/o this patch:
[INFO ] MMAP window: SPI flash base=0x1000000, Host base=0xff000000, Size=0x1000000
[INFO ] MMAP window: SPI flash base=0x900000, Host base=0xf9900000, Size=0x700000
w/ this patch:
[INFO ] Fixed Decode Window: SPI flash base=0x1000000, Host base=0xff000000, Size=0x1000000
[INFO ] Extended Decode Window: SPI flash base=0x900000, Host base=0xf9900000, Size=0x700000
Change-Id: I904f70f42fa70ea06e6f49bd44631a8491463207
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
Ideally lock configuration is not applicable for early GPIO
configuration (like bootblock/romstage) and is only required for GPIO
PAD configuration by later statge (like ramstage).
The GPP_D15 pin was previously configured with LOCK_CONFIG in the
early bootblock GPIO configuration. This is not necessary and prevents
later boot stages from configuring this GPIO.
Change-Id: Ie0e648b750d7579def39ed95eab862dc3245499c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
|
|
Enable BT audio offload of WIFI_CNVI_WIFI6E or unprovisioned
based on fw_config.
BUG=b:373510270
TEST=Build and boot to Lotso. Verify the config from serial logs.
w/o this CL -
```
[SPEW ] -- CNVi Config --
[SPEW ] CNVi Mode= 1
[SPEW ] Wi-Fi Core= 1
[SPEW ] BT Core= 1
[SPEW ] BT Audio Offload= 0
```
w/ this CL -
```
[SPEW ] -- CNVi Config --
[SPEW ] CNVi Mode= 1
[SPEW ] Wi-Fi Core= 1
[SPEW ] BT Core= 1
[SPEW ] BT Audio Offload= 1
```
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Change-Id: I36f8c3fb24166c86d5fc4099fa9cde8cdecb9d49
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84768
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
