| Age | Commit message (Collapse) | Author |
|---|
|
Due to GPE routing, raw GPIO cannot be used for indicating the wake
signal for touchpad. Instead we need to reference GPE pins.
BUG=chrome-os-partner:55670
Change-Id: Ie5d8473df4301c7beef0cae8fe84e71b2838261b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15947
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This is required for using GPE_* macros in devicetree.cb.
BUG=chrome-os-partner:55670
Change-Id: I8f6f536df96cf8145bb0c03ec413fb2f374301b5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15946
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
1. Enable SoC SD_CMD/D* signals pull-down of 20k when SD-card
is removed. When SD-card is disconnected, the pull-down is
disabled.
2. Provide path for weak leakage from buffers of SD_CMD/D* signal
to be grounded. Thus dropping voltage on the SD_CMD/D* signals to ~0V.
BUG=chrome-os-partner:54421
TEST=no power leakage when SDCard isn't inserted on skylake platform
Change-Id: I567199b172841125f8916a61a76005cfdaa62eb8
Signed-off-by: Zhuo-hao.Lee <zhuo-hao.lee@intel.com>
Reviewed-on: https://review.coreboot.org/15910
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Do not pass VBT table to fsp in normal mode and S3 resume so that
PEIM GFX will not get initialized.
Change-Id: Iab7be3cceb0f80ae0273940b36fdd9c41bdb121e
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
Reviewed-on: https://review.coreboot.org/14575
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
We need to enable DRAM ODT on kevin/gru board to improve the
DRAM signal. Note, if the DRAM ODT is enabled and set to 120ohms,
the sdram VREF need to adjust to 840mv.
This patch also makes following changes:
1. For compatiblity with the old board, add the
"sdram-lpddr3-hynix-4GB-666-no-odt.inc" and
"sdram-lpddr3-hynix-4GB-800-no-odt.inc" files
which do not enable sdram ODT.
2. Delete the 300MHz dram inc file. The 300MHz sdram config just
reduced 666MHz to 300MHz based on the 666MHz config file, and it is
not stable, so delete it.
3. Delete the 928MHz dram inc file, 928MHz sdram config still in
debuging, delete it for now.
BRANCH=none
BUG=chrome-os-partner:54871
TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass
Change-Id: If0248e1bc4cef2c298762080f1ca018653af0521
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 78d8a28e2d3489c99c9bba2c1c9aa76812e2e33f
Original-Change-Id: I35f0685782d6fb178a95780ec77c45f565dd2194
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/358763
Original-Commit-Ready: Dan Shi <dshi@chromium.org>
Original-Tested-by: Caesar Wang <wxt@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15813
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When enabling the controller ODT, the controller vref needs to
correspond with the ODT value and DQ drive strength.
BRANCH=none
BUG=chrome-os-partner:54871
TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass
Original-Commit-Id: a7251c72b87d9f149b68d086c3252f1c668e0e80
Original-Change-Id: I7e54b3473f68a382208a0fb0b0600552fe6390ad
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/358762
Original-Commit-Ready: Dan Shi <dshi@chromium.org>
Original-Tested-by: Caesar Wang <wxt@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Squashed with:
rockchip/rk3399: Halt if we get an invalid odt or drv value
When we were pushing the updated sdram.c to coreboot.org, the compiler
there found that we were not initializing vref_value_dq in all code
possible code paths.
This patch updates those code paths to halt the system.
Branch=none
Bug=none
Test=Built with coreboot.org toolchain and verified that the compile
errors were gone.
Change-Id: I0ad4207dc976236d64b6cdda58d10bcfbe1fde11
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/362726
Reviewed-by: Julius Werner <jwerner@chromium.org>
Change-Id: I22a0cef6f12d9aae2ea4dcb99e7ebdd788f2cdd1
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/15812
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Update the copyright dates in the FSP 2.0 files.
Add a copyright to Kconfig.
TEST=Build and run on Galileo Gen2
Change-Id: I0ad0c5650bde0e31d01a04bcc7d22a19273fe29b
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15852
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Update the write protect GPIO reported in ACPI to GPIO_75.
Also update the controller ID to "INT3452:01" which will
point at the goldmont device and includes write protect GPIO.
BUG=chrome-os-partner:55604
BRANCH=none
TEST=verify crossystem output for wpsw_cur.
Change-Id: Ibe6a013aaab18bfa2436698298177218ca934fab
Signed-off-by: Susendra Selvaraj <susendra.selvaraj@intel.com>
Reviewed-on: https://coreboot.intel.com/7929
Reviewed-by: Petrov, Andrey <andrey.petrov@intel.com>
Tested-by: Petrov, Andrey <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15691
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add new UPDs for Fspm and Fsps. Update headers to make new UPDs
available for use. New UPDs enable various memory and trace funtionality
options as well as support for zero sized IBB region.
BUG=chrome-os-partner:55513
BRANCH=none
TEST=built and tested with no regressions
Change-Id: Id1573baaa306ed4fe4353df5f27e5963cb1a76e6
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/15815
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch updates dptf variable in gnvs based on device
configuration by reading the device tree structure.
BUG=chrome-os-partner:53096
TEST=Verify that the thermal zones are enumerated
under /sys/class/thermal in Amenia and Reef board.
Navigate to /sys/class/thermal, and verify that a
thermal zone of type TCPU exists there.
Change-Id: I8ab34cdc94d8cdc840b02347569a9f07688e92cd
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15620
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch adds apollolake soc specific change. DPTF
ASL files are now in src/soc/intel/common so that
they can be reused but different soc can have different values
e.g., for skylake cpu soc thermal reporting device is at
Bus 0, Device 4, Function 0 while for apollolake it is Bus 0, Device 0,
Function 1. This patch adds a dptf asl file in soc directory where we
can define all values which can change across soc's and can be
included in mainboard dptf asl.
BUG=chrome-os-partner:53096
TEST=In Amenia and Reef board verify that the thermal zones are
enumerated under /sys/class/thermal in Amenia and Reef board.
Navigate to /sys/class/thermal, and verify that a thermal
zone of type TCPU exists there.
Change-Id: I888260a9c799d36512411a769f26dd30cf8d5788
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15619
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This patch adds the common ASL code for Intel
platforms. This is the basic ASL needed to add support
for DPTF controlled devices. We are moving
these commmon ASL files to src/soc/intel/common/acpi as
these are same codes used in all Intel platforms and
hence no need to duplicate.
BUG=chrome-os-partner:53096
TEST=Verify that the thermal zones are enumerated
under /sys/class/thermal. Navigate to
/sys/class/thermal, and verify that a thermal
zone of type TCPU exists there.
Change-Id: I01078382a9008263c6ad99f6bf07558885af6a63
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15093
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Including the terminating null, 17 characters were being written to the
field, overwriting the a byte of the size field.
Fortunately, the size was updated soon after this.
Fixes coverity warning 1229570 - Destination buffer too small.
Change-Id: I39285a9283dd9a17d638afe5b2755c7e420d7698
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15889
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
A few things are currently missing:
- The trap handler doesn't set the stack pointer, which can easily
result in trap loops or memory corruptions.
- The SBI trampolin page (as described in version 1.9 of the RISC-V
Privileged Architecture Specification), has been removed for now.
Change-Id: Id89c859fab354501c94a0e82d349349c29fa4cc6
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15591
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
And do the detection just before the initialization.
Change-Id: I9a52430262f799baa298dc4f4ea459880abe250e
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15831
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
These functions are not used anywhere.
Change-Id: Ica1f4650e8774dd796be0aff00054f3698087816
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15829
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
FSP temp ram init was getting called earlier from ROMCC bootblock.
Now with C entry boot block, it is needed to locate FSP header and
call FspTempRamInit.
Hence add fsp 1_1 driver code to locate FSP Temp ram and execute.
BUG=chrome-os-partner:55357
BRANCH=none
TEST=Built kunimitsu and ensure FSP Temp Ram Init return success
Change-Id: If40b267777a8dc5c473d1115b19b98609ff3fd74
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/15787
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Define LPC decode ranges for EC communication.
BUG=chrome-os-partner:55357
BRANCH=none
TEST=Built and boot kunimitsu to ensure no EC timeout error
Change-Id: Idefdd79e67e89a794195c6821fee16550d1eda53
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/15898
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Move mainboard post console init functionality (google_chrome_ec_init &
early_gpio programming) from verstage to bootblock.
Add chromeos-ec support in bootblock
BUG=chrome-os-partner:55357
BRANCH=none
TEST=Built and boot kunimitsu till POST code 0x34
Change-Id: I1b912985a0234d103dcf025b1a88094e639d197d
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/15786
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
List of activity performing in this patch
- early PCH programming
- early SA programming
- early CPU programming
- mainborad early gpio programming for UART and SPI
- car setup
- move chipset programming from verstage to post console
BUG=chrome-os-partner:55357
BRANCH=none
TEST=Built and booted kunimitsu till POST code 0x34
Change-Id: If20ab869de62cd4439f3f014f9362ccbec38e143
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/15785
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Enable cache-as-ram and prepare for c entry in bootblock.
BUG=chrome-os-partner:55357
BRANCH=none
TEST=Built and booted kunimitsu till POST code 0x2A
Credits-to: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I3412216cdf8ef7e952145943d33c3f07949da3c1
Reviewed-on: https://review.coreboot.org/15784
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BUG=chrome-os-partner:55639
Change-Id: I7a536bc1cab51e7c942b2e0e48dfe18d8de08a6e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15925
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:55639
Change-Id: Ie38cdbec513e2bb66e276399c8b4490cbe34a747
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15924
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:55639
Change-Id: I40a28f921499ddf43d8b423f5192ac93b40254c1
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15903
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
1. Currenty, boot reason is being added to elog only for some
ARM32/ARM64 platforms. Change this so that boot reason is logged by
default in elog for all devices which have CHROMEOS selected.
2. Add a new option to select ELOG_WATCHDOG_RESET for the devices that
want to add details about watchdog reset in elog. This requires a
special region WATCHDOG to be present in the memlayout.
3. Remove calls to elog add boot reason and watchdog reset from
mainboards.
BUG=chrome-os-partner:55639
Change-Id: I91ff5b158cfd2a0749e7fefc498d8659f7e6aa91
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15897
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This is required to enable elog support in ChromeOS by default.
BUG=chrome-os-partner:55639
Change-Id: I9c97143d794de4bf220ddf67c0ca2eac2f7a326d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15896
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:55639
Change-Id: Idbad4f8763be18002907a62be755b2fdf7e479ec
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15895
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:55639
Change-Id: Ie859ec3ff682e91a4d7d38d3c3cd6badf7385431
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15894
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
These files are required by storm and gale boards for enabling elog
support in ramstage.
BUG=chrome-os-partner:55639
Change-Id: I2bbfee2acf2bfe2f896a8619b1276dcea1b87f16
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15893
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:55639
Change-Id: I3ac2b256862758bb5c9e6c2f1311972af474e8f6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15870
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
With VBOOT_VERIFY_FIRMWARE separated from CHROMEOS, move recovery and
developer mode check functions to vboot. Thus, get rid of the
BOOTMODE_STRAPS option which controlled these functions under src/lib.
BUG=chrome-os-partner:55639
Change-Id: Ia2571026ce8976856add01095cc6be415d2be22e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15868
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
VBOOT_VERIFY_FIRMWARE should be independent of CHROMEOS. This allows use
of verified boot library without having to stick to CHROMEOS.
BUG=chrome-os-partner:55639
Change-Id: Ia2c328712caedd230ab295b8a613e3c1ed1532d9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15867
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
If the system is in recovery, store the newly generated MRC data using a
dummy version which is not legit. This ensures that on next normal boot,
new MRC data will be generated and stored.
BUG=chrome-os-partner:55699
Change-Id: Ib13e8c978dc1b4fc8817fab16d0e606f210f2586
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15828
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Currently, coreboot performs an erase of the entire MRC cache region on
flash if there is a version mismatch for the MRC data. Instead of doing
that, store the new MRC data in the next available slot, if there is
enough space available in the cache region.
BUG=chrome-os-partner:55699
Change-Id: Ib24a94f0a47c79941ed9f60095360ae3aad5540b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15915
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The slippy board was a proof of concept device that has never
made it out in the wild. Moreover, I don't think any of these
boards exist any longer.
Change-Id: I24fb08d9be35b2367e7aa64520ce5778ab861535
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15902
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The bolt board was a proof of concept device that has never
made it out in the wild. Moreover, I don't think any of these
boards exist any longer.
Change-Id: I5ca055d448659a2b8e2eafcfc2114a6b8f8a56a4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15901
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The monitor/mwait is broken on Apollolake. So use ACPI legacy
mwait IO redirection as a work around
BUG=chrome-os-partner:55110
Change-Id: I2e1834130d9586b4310466d3549d19bf427ffe24
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/15890
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This renames the VB_SOURCE variable to VBOOT_SOURCE in the build system,
providing increased clarity about what it represents.
Since the submodule itself is called "vboot", it makes sense to use that
name in full instead of a very shortened (and confusing) version of it.
Change-Id: Ib343b6642363665ec1205134832498a59b7c4a26
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15824
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This introduces a CHROMEEC_SOURCE variable used for indicating the CrOS
EC source path, with a fallback to 3rdparty/chromeec.
This allows specifying an external path for the CrOS EC source path.
Change-Id: I9792c7f21597127a385b961b65a00d44cfa37146
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15765
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Quark does not support the rdmsr and wrmsr instructions. Use SOC
specific routines to configure the MTRRs on Quark based platforms.
Add cpu_common.c as a build dependency to provide access to the routine
cpu_phys_address_size.
TEST=Build and run on Galileo Gen2
Change-Id: I43b7067c66c5c55b42097937e862078adf17fb19
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15846
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Quark does not support the rdmsr and wrmsr instructions. In this case
use a SOC specific routine to support the setting of the MTRRs. Migrate
the code from FSP 1.1 to be x86 CPU common.
Since all rdmsr/wrmsr accesses are being converted, fix the build
failure for quark in lib/reg_script.c. Move the soc_msr_x routines and
their depencies from romstage/mtrr.c to reg_access.c.
TEST=Build and run on Galileo Gen2
Change-Id: Ibc68e696d8066fbe2322f446d8c983d3f86052ea
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15839
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Now hardcode maximum memory frequency capability to 800MHz, as
all chipsets in x4x family support PC2-6400 according to the datasheet.
CAS latency detection also relies on this, and has been cleaned up.
Ram initialization does not work with FSB 1333MHz / DDR2 800MHz combination,
so disable this combination for now, and reduce to 667MHz instead.
Still don't know why this is the case, but FSB1333/667 works.
These changes should now allow existing configurations to continue working,
while providing support for previously unworking configurations, due to
previous buggy CAS latency detection code.
TESTED: on GA-G41M-ES2L
CPU: E5200 @ 2.50GHz (FSB 800MHz)
2x 1GB 667MHz hynix worked @ 667
1x 2GB 800Mhz ARAM worked @ 800
1x 1GB 667Mhz StarRam worked @ 667
2x 2GB 800Mhz (generic) worked @ 800
Change-Id: I1ddd7827ee6fe3d4162ba0546f738a8f9decdf93
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/15818
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Allow bootblock to get access to the static device tree like
other early stages. device_romstage.c was renamed to
device_simple.c to better articulate the usage since it's not
just being used in romstage.
BUG=chrome-os-partner:55357
Change-Id: I3d63d2754c737cc738c09a3e3b3b468362fb78d1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15837
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins)
|
|
All mainboards (nyans) utilizing the cache_policy option
has it set to DCACHE_WRITETHROUGH. This option is for setting
the framebuffer's cache attribute. However, this option is
reliant on an architecture-specific enumeration. Just remove
the option and use DCACHE_WRITETHROUGH across the board. If
someone wants to reconfigure it at a later date one can
introduce a non-architecture specific option.
Change-Id: I6a0848231f5e28d36ec2d56b239bed67619fe5a7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15838
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Convert the FSP 2.0 UPD headers from typedef to struct:
* FSP_UPD_HEADER
* FSPM_ARCH_UPD
TEST=Build and run on Galileo Gen2
Change-Id: Iab241ea07c955e95ff988a4a30103d2a112179b6
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15856
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
We set this driving control to prevent signal attenuation caused by
LVDS DRV termination.
When DA_LVDSTX_PWR_ON is not set, LVSH has no power and LVDS DRV
termination status is unknown(floating). This creates a chance that MIPI
output would be influenced. The DSI's LP signal will be half voltage
attenuation. There will be no display on panel.
When DA_LVDSTX_PWR_ON is set, LVSH and LVDS DRV termination are
effective and termination is fixed OFF. The DSI won't be influenced.
We only need to set this register once, so we set it here to prevent
repeat setting in the kernel when the system goes to recovery mode.
BUG=chrome-os-partner:55296
BRANCH=none
TEST=build pass elm and show ui
The original commit in the cros repo combined the chipset and mainboard
code changes. This has been split for the push to coreboot.org
Change-Id: I733bdd115950b71493856220414ac0dd75d28122
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 0d25a27f300acc4b65a894110d3ee0cc9676cd12
Original-Change-Id: Ie71f9cc41924787be8539c576392034320b57a49
Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/360850
Original-Commit-Ready: jitao shi <jitao.shi@mediatek.com>
Original-Tested-by: jitao shi <jitao.shi@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15808
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
We set this driving control to prevent signal attenuation caused by
LVDS DRV termination.
When DA_LVDSTX_PWR_ON is not set, LVSH has no power and LVDS DRV
termination status is unknown (floating). This creates a chance that
MIPI output would be influenced. The DSI's LP signal will be half
voltage attenuation. There will be no display on panel.
When DA_LVDSTX_PWR_ON is set, LVSH and LVDS DRV termination are
effective and termination is fixed OFF. The DSI won't be influenced.
We only need to set this register once, so we set it here to prevent
repeatedly setting in the kernel when the system goes to recovery mode.
BUG=chrome-os-partner:55296
BRANCH=none
TEST=build pass elm and show ui
Change-Id: Ie3ccf6fb611dd5a1e2c02b7825d42a92e61268c0
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 0d25a27f300acc4b65a894110d3ee0cc9676cd12
Original-Change-Id: Ie71f9cc41924787be8539c576392034320b57a49
Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/360850
Original-Commit-Ready: jitao shi <jitao.shi@mediatek.com>
Original-Tested-by: jitao shi <jitao.shi@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15807
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Place a map file for the postcar stage and place it into
build/cbfs/fallback.
TEST=Build and run on Galileo Gen2
Change-Id: I349c06e3c610db5b3f2511083208db27110c34d0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15845
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Move the ramstage files to the beginning of the section. Eliminate
duplicate conditionals.
TEST=Build and run on Galileo Gen2
Change-Id: I461a5b78a76bd0d2643b85973fd0a70bc5e89581
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15892
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Move the romstage files into the romstage section of the file.
Eliminate duplicate conditional statements.
TEST=None
Change-Id: Ie2d65cef3797a2c091c0cd76b147b30a765332ad
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15891
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Move the postcar commands to in between romstage and ramstage. Add the
stage header.
TEST=Build and run on Galileo Gen2
Change-Id: I530da6afd8ccbcea217995ddd27066df6d45de22
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15844
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The removal of ELOG_FLASH_BASE and ELOG_FLASH_SIZE resulted
in the FMAP region for the eventlog to be honored. However,
certain systems seem to have a large eventlog region that
wasn't being used in practice. Because of the malloc() in the
eventlog init sequence a large allocation was now being requested
that can exhaust the heap. Put back the 4KiB capacity until
the resource usage is fixed.
BUG=chrome-os-partner:55593
Change-Id: Ib54b396b48e5be80f737fc3feb0d58348c0d2844
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15835
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
XIP cachelines contain the executable to run, we never want
that to get modified. With the change such erronous writes
are ignored and next cacheline miss will fetch from boot
media (SPI / FWH flash).
Change-Id: I52b62866b5658e103281ffa1a91e1c64262f3175
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15778
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Match the definition and use of these variable with haswell, such that
DCACHE_RAM_MRC_VAR_SIZE is not included in DCACHE_RAM_SIZE.
Change-Id: I5af20f63cd0cb631d39f7c7fe0e2a99ebd3ce986
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15761
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The build fails during postcar when ULZMA compression is not selected.
Fix cbfs.c to support LZ compression for ramstage as well.
The build error is:
build/postcar/lib/cbfs.o: In function `cbfs_load_and_decompress':
/home/lee/coreboot/public/src/lib/cbfs.c:116: undefined reference to
`ulzman'
make: *** [build/cbfs/fallback/postcar.debug] Error 1
TEST=Build and run on Galileo Gen2
Change-Id: I7fa8ff33c0d32e0c5ff5de7918e13e6efb1df38e
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15841
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Separate NO_XIP_EARLY_STAGES from loading FSP-M into cache-as-RAM.
Quark executes romstage directly from the SPI flash part (in-place),
but loads FSP-M into ESRAM. This split occurs because ESRAM is too
small to hold everything while debugging.
Platforms executing FSP-M directly from the SPI flash need to select
FSP_M_XIP.
TEST=Build and run on Galileo Gen2.
Change-Id: Ib5313ae96dcec101510e82438b1889d315569696
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15848
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Enable the display of cbmem during romstage and postcar. Add a Kconfig
value to prevent coreboot images from increasing in size when this
feature is not in use.
TEST=Build and run on Galileo Gen2
Change-Id: Ib70ad517ebf7d37a7f46ba503b4432c7c04d7ded
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15842
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Build the UART drivers for the postcar stage.
TEST=Build and run on Galileo Gen2
Change-Id: I8bf51135ab7e62fa4bc3e8d45583f2feac56942f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15843
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This allows the board to save the recovery request in case of unexpected
reboots caused by FSP.
With recovery module in vboot handling the saving of recovery reason
across reboots, there is no need to have special fsp reset handling
under soc.
BUG=chrome-os-partner:55431
Change-Id: I0b7ce14868a322072d3e60c1dae43f211b43fdbf
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15804
Tested-by: build bot (Jenkins)
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This allows the board to save the recovery request in case of unexpected
reboots caused by FSP.
BUG=chrome-os-partner:55431
Change-Id: If71802d2cba52a426f4c2db90d6c5384ed03ce68
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15803
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
As shown in testing, if CA use 34.3ohms drive strength, it leads
to an overshoot. To fix this, change the drive strength to 48 ohms.
BRANCH=none
BUG=chrome-os-partner:54871
TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass
Change-Id: I8666474fc18391da14a3338611f962f2f08f36d0
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: fbc1c13f9ab808fc907b2e3f9bde1d09f92980f1
Original-Change-Id: I231f5b1bd45ff262686fbacbaf119a8a57fad27b
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/358761
Original-Commit-Ready: Dan Shi <dshi@chromium.org>
Original-Tested-by: Caesar Wang <wxt@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15811
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
_Static_assert() gets evaluated even when the code path it's in is
unreachable (e.g. inside an if (0) block). Unfortunately, Kconfigs that
depend on a disabled Kconfig are always 0, meaning that
CONFIG_CONSOLE_SERIAL_UART_ADDRESS on Gru cannot evaluate to UART2 when
CONFIG_CONSOLE_SERIAL (which it depends on) is disabled. Switch the
condition it is wrapped in to a preprocessor #if so that the
_Static_assert() is not evaluated when building without serial support.
BRANCH=None
BUG=None
TEST=Built and booted Kevin without serial
Change-Id: I391325fcc4b7d64b4866a7fce4444e2f28365b7d
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: f5e5cf0644154eca5b347ea381df3f6b28287524
Original-Change-Id: I33d51d4ef09b218c14173d39a12795f0cef6bb40
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/361581
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15810
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
On some x86 platforms (skylake, apollolake), we observe reboots at
different steps during the FSP initialization. These additional reboots
result in loss of recovery request because vboot_reference library
clears recovery request on vbnv once verification is complete and it has
made a decision about which boot path to take(normal/dev, slot-a/slot-b,
recovery).
Provide a way to allow mainboards/chipsets to inform recovery module in
vboot2 to save recovery reason to survive unexpected reboots. The
recovery reason is set in vbnv after vboot_reference library completes
its verification and clears the reason in vbnv while jumping to
payload.
BUG=chrome-os-partner:55431
Change-Id: Ie96be9aeb42c8209d8215943409e6327d6a8bf98
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15802
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Fix the board ID handling.
Recovery switch and WP status GPIO has been reassigned in board rev3.
Configure related GPIOs based on Board ID.
BUG=chrome-os-partner:55320
TEST=Verified GPIO assignment for Rev.1 board.
BRANCH=None
Change-Id: Id8e1ba1c039f8b5b503f0da038e5cfc84b72678f
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: d295ab514e31d9ebd1b77e0af9b769e64cbf567e
Original-Change-Id: I6d3d5df2e9017f7845edc3cd0b2c19ad7c58a97c
Original-Signed-off-by: Kan Yan <kyan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/361393
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/15809
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Use the newly added check recovery request function from recovery module
in vboot2 to check for a pending recovery request.
BUG=chrome-os-partner:55431
Change-Id: I354cc094f1e5d0044cf13e5bc28246f058d470c6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15801
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add recovery module in vboot2 that checks if a recovery request is
pending and returns appropriate reason code:
1. Checks if recovery mode is initiated by EC.
2. Checks if recovery request is present in VBNV.
3. Checks if recovery request is present in handoff for post-cbmem
stages.
4. Checks if vboot verification is complete and looks up selected region
to identify if recovery is requested by vboot library.
BUG=chrome-os-partner:55431
Change-Id: I31e332a4d014a185df2434c3730954e08dc27281
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15800
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
1. Remove unused functions/structures.
2. Add checks for NULL return values.
3. Change prefixes to vb2 instead of vboot for functions used internally
within vboot2/
4. Get rid of vboot_handoff.h file and move the structure definition to
vboot_common.h
5. Rename all functions using handoff structure to have prefix
vboot_handoff_*. All the handoff functions can be run _only_ after cbmem
is online.
6. Organize vboot_common.h content according to different
functionalities.
BUG=chrome-os-partner:55431
Change-Id: I4c07d50327d88cddbdfbb0b6f82c264e2b8620eb
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15799
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
All the mainboards share the same config options for CHROMEOS. Instead
of duplicating those in every mainboard, move the CHROMEOS config to SoC
and make it dependent on MAINBOARD_HAS_CHROMEOS.
BUG=chrome-os-partner:55431
Change-Id: Iafabb6373dfe16aaf0fe2cbc4e978952adeb403e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15822
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
All the mainboards share the same config options for CHROMEOS. Instead
of duplicating those in every mainboard, move the CHROMEOS config to SoC
and make it dependent on MAINBOARD_HAS_CHROMEOS.
BUG=chrome-os-partner:55431
Change-Id: I2d54ff6beac9fca7596a8f104e3c1447cada5c05
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15821
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:55431
Change-Id: I94fe54c12d7438a71f81a9053cc9785c0aa1e6cf
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15823
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Bitmap images have been moved to CBFS from GBB. This patch adjusts the flash
size accordingly for jecht.
BUG=chromium:622501,chromium:628494
BRANCH=none
TEST=emerge-jecht chromeos-bootimage
CQ-DEPEND=CL:361380
Change-Id: I941df04b4999d35bd652e4ee1664c032cb550b29
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: c859ce04d2df5f21c47a164cabbc9ef6dec61818
Original-Change-Id: I50a9ade2e90237b0a7c277bffd7b540132415f13
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/361370
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15806
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This device has a built-in keyboard that should be enabled by default
or it will not work in firmware. This was tested to ensure that TAB
(display info) and Ctrl+D (enter developer mode) are functional at the
Chrome OS recovery screen.
BUG=chrome-os-partner:55549
Change-Id: I60156f1fc001b88deac69e03e02e9d8277fbc38d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15782
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The controller for device mode USB is not plan of record
on apollolake. However, one still needs to configure the
one port to be host mode by default such that the devices
work as expected when plugged into the board.
BUG=chrome-os-partner:54581,chrome-os-partner:54656
TEST=Enabled xdci controller. Used USB type C->A dongle to
check that a mass storage device worked on port 0 on
reef.
Change-Id: Ia9ec5076491f31bc5dc3d534e235fb49f7b2efac
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15781
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Now that FMAP is a first class citizen in coreboot
there's no reason to have alternate locations for ELOG.
If one wants eventlog support they need to specify the
ELOG entry in the FMAP. The one side effect is that
the code was previously limiting the size to 4KiB
because the default ELOG_AREA_SIZE was 4KiB. However,
that's no longer the case as the FMAP region size is
honored.
Change-Id: I4ce5f15032387155d2f56f0de61f2d85271ba606
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15814
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
At this state, variable MTRRs are disabled. We overwrite this MTRR entry
before they are re-enabled.
Change-Id: Ieedf90f65514d848905626e75be496e08f710d91
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15794
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I65f0ad430bdcc2065c1e873743da04201a68d9c9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15796
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ib3c973d2e89d4c25c3bf1e52662fbfcb4b1e4355
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15789
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The fixed MTRRs cover the range [0:1MiB). While calculating the
variable MTRR usage the 1MiB boundary is checked such that
an excessive number of MTRRs aren't used because of unnatural
alignment at the low end of the physical address space. Howevever,
those checks weren't inclusive of the 1MiB boundary. As such a
variable MTRR could be used for a range which is actually covered
by the fixed MTRRs when the end address is equal to 1MiB. Likewise,
if the starting address of the range lands on the 1MiB boundary
then more variable MTRRs are calculated in order to meet natural
alignment requirements.
Before:
MTRR: Physical address space:
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
0x00000000000a0000 - 0x0000000000100000 size 0x00060000 type 0
0x0000000000100000 - 0x000000007b800000 size 0x7b700000 type 6
0x000000007b800000 - 0x00000000b0000000 size 0x34800000 type 0
0x00000000b0000000 - 0x00000000c0000000 size 0x10000000 type 1
0x00000000c0000000 - 0x0000000100000000 size 0x40000000 type 0
0x0000000100000000 - 0x0000000180000000 size 0x80000000 type 6
CPU physical address size: 39 bits
MTRR: default type WB/UC MTRR counts: 7/17.
MTRR: WB selected as default type.
MTRR: 0 base 0x0000000000000000 mask 0x0000007ffff00000 type 0
MTRR: 1 base 0x000000007b800000 mask 0x0000007fff800000 type 0
MTRR: 2 base 0x000000007c000000 mask 0x0000007ffc000000 type 0
MTRR: 3 base 0x0000000080000000 mask 0x0000007fe0000000 type 0
MTRR: 4 base 0x00000000a0000000 mask 0x0000007ff0000000 type 0
MTRR: 5 base 0x00000000b0000000 mask 0x0000007ff0000000 type 1
MTRR: 6 base 0x00000000c0000000 mask 0x0000007fc0000000 type 0
After:
MTRR: Physical address space:
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
0x00000000000a0000 - 0x0000000000100000 size 0x00060000 type 0
0x0000000000100000 - 0x000000007b800000 size 0x7b700000 type 6
0x000000007b800000 - 0x00000000b0000000 size 0x34800000 type 0
0x00000000b0000000 - 0x00000000c0000000 size 0x10000000 type 1
0x00000000c0000000 - 0x0000000100000000 size 0x40000000 type 0
0x0000000100000000 - 0x0000000180000000 size 0x80000000 type 6
CPU physical address size: 39 bits
MTRR: default type WB/UC MTRR counts: 6/8.
MTRR: WB selected as default type.
MTRR: 0 base 0x000000007b800000 mask 0x0000007fff800000 type 0
MTRR: 1 base 0x000000007c000000 mask 0x0000007ffc000000 type 0
MTRR: 2 base 0x0000000080000000 mask 0x0000007fe0000000 type 0
MTRR: 3 base 0x00000000a0000000 mask 0x0000007ff0000000 type 0
MTRR: 4 base 0x00000000b0000000 mask 0x0000007ff0000000 type 1
MTRR: 5 base 0x00000000c0000000 mask 0x0000007fc0000000 type 0
BUG=chrome-os-partner:55504
Change-Id: I7feab38dfe135f5e596c9e67520378a406aa6866
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15780
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Update the write protect GPIO reported in ACPI to GPIO_75.
Also update the controller ID to "INT3452:01" which will
point at the goldmont device and includes write protect GPIO.
BUG=none
BRANCH=none
TEST=verify crossystem output for wpsw_cur.
Change-Id: Id6b172e289976072836746c1814e0300544a06cb
Signed-off-by: sselvar2 <susendra.selvaraj@intel.com>
Reviewed-on: https://coreboot.intel.com/7771
Reviewed-by: Sparry, Icarus W <icarus.w.sparry@intel.com>
Reviewed-by: Petrov, Andrey <andrey.petrov@intel.com>
Tested-by: Petrov, Andrey <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15496
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The gpio bank irq is not correct and hence gpio
bank handler is never called in case of gpio based irq.
Correct the gpio bank irq to enable gpio based irq.
BUG=chrome-os-partner:55433
TEST=cat /proc/interrupts | grep INT3452 should
output 14.
Change-Id: I54253786425b7d4c2007043d49a91dfa6db0397b
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/15756
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
YangtzeSataResetService implements the SataSetMaxGen2 double.
The value should be only set, if the condition is met.
For testing, add
FchParams_env->Sata.SataMode.SataSetMaxGen2 = FALSE;
to your BiosCallOuts.c, which enables GEN3 for the SATA ports.
Patch is tested with bap/e20xx board, Lubuntu 16.04 Kernel 4.4.
$ dmesg | grep ahci #before patch
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
$ dmesg | grep ahci #after patch
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
Change-Id: I17a493b876a4be3236736b2116b331e465b159af
Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com>
Reviewed-on: https://review.coreboot.org/15728
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This changelist updates gpio config for speaker SDMODE pin.
It disables speaker by default.
Audio kernel is expected to enable this when audio rendering starts.
Change-Id: Id33ad29e637bf1fe6b02e8a4b0fd9e220e8983e7
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-on: https://review.coreboot.org/15433
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The 'dram density' is a misnomer because the memory initialization
code treats that input parameter as a per rank density. Therefore,
update the variables to further clarify how it's actually being
used.
BUG=chrome-os-partner:55446
Change-Id: Ie4c944f35b531812205ac0bb1c70f39ac401495e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15773
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
The 16Gb devices use two ranks per channel within the DRAM module.
However, the density settings are really on a per rank basis so
indicate dual rank with a device density of 8Gb.
BUG=chrome-os-partner:55446
Change-Id: Ib5dba6f9ed248750d68b726996c71def9b75961e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15772
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Despite the UPD comments the Chx_RankEnable fields are a bit
mask which indicates which ranks are enabled for physical
channel. Add the ability to set the rank mask correctly for
dual rank LPDDR4 modules.
BUG=chrome-os-partner:55446
Change-Id: I9dbed7bb6a4b512e57f6b4481180932a7cce91ff
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15771
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
The reset requests are handled in the FSP 2.0 wrapper, but
the current code doesn't check any non-successful return
values. Provide parity with the memory init path which die()s
under those circumstances.
Change-Id: I9df61323f742b4e94294321e3ca3ab58a68ca4dd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15766
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Not all are matched, but this makes it easier to backport
MTRR changes from haswell.
Change-Id: Ida5943b1469fc0089a31ff3b18131fb82b0941c6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15760
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Icd0cc7d27f38bdaee6addb98abec6f310cdd9fae
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15759
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
These guards have been removed starting with model_206ax.
Change-Id: Id63034ec4080e37eee2c120aa1f1ef604db5b203
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15758
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Since the socket layer is implemented with this CPU model, there
could potentially be multiple CPU models included. There can be
only one cache_as_ram include, so select it directly within
the socket directory.
Change-Id: Ia52bb152276eddfd1fb33ddb7f5d153ab8e8163c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15757
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The EVT board uses an active high power control signal while
the previous board used an active low signal. Update the tables
to reflect the differences.
BUG=chrome-os-partner:55470
Change-Id: I198c0e4e019fcffe2cf748d382351ac965a81077
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15763
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
I mistakenly assumed the order of the bits matched how one
would assign values as they wrote them msb .. lsb. However, the
gpio lib doesn't do that. Correct the order so that values are
read out correctly.
BUG=chrome-os-partner:54949t
Change-Id: I5304dfe2ba6f8eb073acab3377327167573ec2cc
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15753
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This entry gets added in run_ramstage().
Change-Id: I18cda4ead3614c6d07c3269cbee53e6def6408c7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15755
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Zero-filling memory below 1 MiB resets car_migrated variable so
any CAR GLOBALs are not addressed correctly for the remaining
time in romstage. Also there is no actual need to do this as
ramstage loader handles BSS.
This fixes regression with commit 70cd54310 that broke fam10 boards
with romstage spinlocks enabled.
Change-Id: I7418821997a980ae5b818bd57e8a1b6507a543af
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15754
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
B stepping onwards we have to support two Graphics Device ID.
BUG=chrome-os-partner:55449
Change-Id: I520791ad8573dc5deb6ea1e33e1486f05050438c
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
Reviewed-on: https://review.coreboot.org/15767
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Split the additional time stamps concerning depthcharge from
the cbmem utility sourcecode and move them into
commonlib/timestamp_serialized.h header.
Change-Id: Ic23c3bc12eac246336b2ba7c7c39eb2673897d5a
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15725
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
EVT has a wake signal for track pad which is routed to GP_15.
BUG=chrome-os-partner:54960
Change-Id: I9a73a3dc74e3bbed63509a3c076ec17a6559da55
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15723
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The tpm2_marshal_command() function returns a negative value on error,
so we must use a signed type for the return value.
This was found by the coverity scan:
https://scan.coverity.com/projects/coreboot?tab=overview
CID:1357675
CID:1357676
Change-Id: I56d2ce7d52b9b70e43378c13c66b55ac2948f218
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Found-by: Coverity Scan
Reviewed-on: https://review.coreboot.org/15717
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
Add missing break to LEG_GPIO_REGS case to return the correct value for
legacy GPIO reads. Fixes coverity issue CID 1357460.
Found by Coverity, Fixes:
* CID 1357460 (#1 of 1): Unused value (UNUSED_VALUE)
returned_value: Assigning value from reg_legacy_gpio_read(step->reg)
to value here, but that stored value is overwritten before it can be
used.
value_overwrite: Overwriting previous write to value with value from
reg_pcie_afe_read(step->reg).
TEST=Build and run on Galileo Gen2.
Change-Id: I6c52e8801a32f510ac94276fe0c097850cbfde57
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15732
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ibab9039306730bfd3063b34cf085e854e4608902
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/14970
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
