| Age | Commit message (Collapse) | Author |
|---|
|
The default EPP is set at 50%, which is deemed insufficiently
aggressive for meeting the MTL performance expectations in
balance_performance mode.
# cat /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_preference
balance_performance
# iotools rdmsr 0 0x774
0x0000000080003f06
EPP=45% is giving the required performance in MTL.
# iotools rdmsr 0 0x774
0x0000000073003d06
NOTE: Kernel changes are necessary to ensure that the EPP (Energy Performance Preference) configured in the BIOS is not overwritten: https://patchwork.kernel.org/patch/13461932
BUG=b:314275133
TEST=Build and boot.
Change-Id: I1953994cdb4e9363fdd4b4728e3e5236276c06c8
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79386
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Non-touchscreen sku will set related GPIOs to NC. If touchscreen enabled
in overridetree for non-touchscreen sku, the boot time will be 6-7s. Set
touchscreen probed to TOUCHSCREEN_UNKNOWN for reduce boot time from 6-7s
to under 1s.
BUG=b:316434359
BRANCH=firmware-nissa-15217.B
TEST=Boot time (cbmem -t) from 6,460,972 to 922,844
Change-Id: I016ce762f726b7624bd060284f74f0992cb129b6
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Make sure that the APMC SMI command IO port is configured to what
coreboot expects and enable the SMI generation for the APMC SMI command
port.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie4fc259dea125a16556a01b80a3d5e6fb476044a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79531
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
All the resource on the host bridge are fixed resources and therefore
have the IORESOURCE_STORED flag set, so the body of this function which
configures IO or MEM ranges is never reached.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I1839f030a4a365e5bc1cdaa3cf37cdf9ca382ff8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79385
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This commit lays the groundwork for implementing the ACPI WDAT (Watchdog
Action Table) table specification. The WDAT is a special ACPI table
introduced by Microsoft that describes the watchdog for the OS.
Platforms that need to implement the WDAT table must describe the
hardware watchdog management operations as described in the
specification. See “Links to ACPI-Related Documents”
(http://uefi.org/acpi) under the heading “Watchdog Action Table”.
BUG=b:314260167
TEST=Mock the acpi_soc_fill_wdat function for a specific platform/soc
and enable ACPI_WDAT_WDT in the kconfig. Check if the build passes
successfully.
Change-Id: Ieb82d1f69b2b7fffacfd2928bc71f8ff10498074
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
FSP default value for LpDdrDqDqsReTraining is 1. For boards
that didn't set LpDdrDqDqsReTraining to any value, 0 was being
assigned and it caused black screen issue.
BUG=b:302465393
TEST=Boot to OS with debug FSP, check LpDdrDqDqsReTraining = 1
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I301a6e43f2944ffbc63431393378ab8b23450032
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch introduces a new API to disable signaling the 3-strike event
on Intel Meteor Lake C0 (QS) stepping and subsequent SoCs. This is
necessary because the existing event handling mechanism is incompatible
with the new hardware design.
Disabling the 3-strike event registration prevents the 3-strike count
from increasing, which addresses bug b:314883362. This issue can potentially lead to system instability.
BUG=b:314883362
TEST=disabling the 3-strike event on a Google Screebo system with QS silicon.
Change-Id: I15bd5a93da34d7f2a127c21c4cd8b5952926bccf
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79472
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The original DA7219 is designed to use a 500ohm mic detection
threshold. Some headset mics (e.g. Logitech H111) have a lower DC impedance that is lower than the threshold and thus cannot be
detected. Lower the threshold to 200ohm to match the new default
value provided by Renasas as in https://patchwork.kernel.org/project/alsa-devel/patch/20231201042933.26392-1-David.Rau.opensource@dm.renesas.com/ to support such headsets.
BUG=b:314062160,b:308207450
Change-Id: I6415e84a4622e0c61bc74b94536fe734048a043f
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Commit ea2c1d3 "cpu/x86/smm: Remove heap" removed the ability to use
heap in SMM, but the ENV_HAS_HEAP_SECTION macro was not updated
appropriately.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I5ae4a63a7bd1b27ae3e9c757aa8557f329aad0f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I176182180f508a180726fca60064b16fad80e9d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Call fill_fadt_extended_pm_io directly from the SoC's acpi_fill_fadt
functions instead of calling fill_fadt_extended_pm_regs that only calls
fill_fadt_extended_pm_io.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I442bc2801cf74c1d836d3b0d88f281bceb5122b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79529
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ie21bf8d436de19c23ae2176bf8d061564cd5b9cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I0a6eaf43ab6da4bb4a0cc0bbefb5b75c206348f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Add the code to configure the FCH IRQ mapping registers and provide the
IRQ name strings for each FCH IRQ mapping configuration register.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I282ae35ebc4d7754121ce4544b782e3cbe7e2256
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
FSP default value for LpDdrDqDqsReTraining is 1. For boards
that didn't set LpDdrDqDqsReTraining to any value, 0 was being
assigned and it caused black screen issue.
BUG=b:302465393,b:315739133
TEST=Boot to OS with debug FSP, check LpDdrDqDqsReTraining = 1
Change-Id: I5d61301fddac6630bb1c48e992dd76e5cf02a272
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79533
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Previously ramdetect.c was compiled only for VENDOR_EMULATION.
Hence add Kconfig option PROBE_RAM which allows board outside
the scope of VENDOR_EMULATION to select and utilize probe_ram
function to runtime detect usable RAM in emulation environment.
PROBE_RAM is default selected if VENDOR_EMULATION is set so
that existing boards under VENDOR_EMULATION scope are not
affected.
Other boards can explicitly select PROBE_RAM to use probe_ram.
TEST=Build mb/arm/rdn2 with PROBE_RAM selected & make sure
there is no any error.
Also checked qemu-aarch64 build to make sure build is success.
Change-Id: Id909ddaee6958cfa8a6c263a11f9a90d94710aa7
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iab640551d6dd246884802ced948ff8c359d922a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79470
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change GPP_B14 from UP_20K to NONE for compatible
with DVT1 and DVT2 board
BUG=b:272447747
TEST=enable usb OC2 function to ensure USBA work normal
Change-Id: Ib7720980335660f423b3a74199ceedc113ec70df
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79431
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update DTT settings based on the suggestion of the thermal.
BUG=b:313833488
TEST=emerge-nissa coreboot
Change-Id: I2296990062cadc05202e3d1ab90af04234bda885
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
1. Ref to SCH, LTE use USB3 Port3, enable it.
2. Explicitly define the use of USB3 Port1 & USB3 Port2.
BUG=b:315061146
TEST=can pass PCIe Hardware Compliance Test
Change-Id: I03d6925020012fa740bbd0168a2f5b02ea6763b4
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change code style to be compatible with Nissa's format:
register "option" = "{
[0] = value /* comment */
...
}"
to
register "option[0]" = "value" /* comment */
BUG=none
TEST=abuild -v -a -x -c max -p none -t google/brya -b anraggar
Change-Id: I60659bd44813173f9b984216473a0919c5f331b8
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79376
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iadc37f2724a9be43cad1f1934403ebabd5cca245
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
- DSDT
- MADT
- SSDT CPUs
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0c86694ae83e9e6aa06a50a8a35bf2b24bc8ab65
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76530
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the opensil_fill_fadt_io_ports function to fill in the ACPI I/O
ports in FADT that openSIL configured.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I154a162cc8e048cadab693c0755e96c71a62983c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76529
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the existing FSP 4301.01 headers for Raptor Lake out of
subdirectory called 43101.01 to follow standard process.
Change-Id: I710f373acd37e9e0f8b50084a1a7e9fbda816e8c
Signed-off-by: Kulkarni, Srinivas <srinivas.kulkarni@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Add the missing parts in soc.asl. Compared to earlier versions of this,
the includes related to S0i3 and DPTC were removed.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I89ecf469e44ca2a3b35c9fcf57c008ff29e7b9bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79468
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the 4 root bridge devices using the ROOT_BRIDGE macro.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If405a90981e5c1fea51935c520800a245473317e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79467
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
acpi/dsdt_top.asl provides some common functionality and needs to be
included at the beginning of the DSDT.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia7b5ddce110b35ed65c6df6cc42995abe93a3ffc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79466
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Instead of including globalnvs.asl in the mainboard's dsdt.asl, include
it in Genoa's soc.asl. This aligns Genoa with Cezanne and newer and also
moves more SoC-common code to the SoC folder.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie0e3299a95e007188a4d9de824cfff8d25a778be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79465
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Apart from the IOAPIC in the FCH which is handled by amd_lpc_ops,
there's one IOAPIC per PCI root which also needs to be initialized.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I38af5a194062e714827852e95f4e29b45311e517
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
There's no need for the two additional spaces between the tabs and the
'='.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic6824e8c7ee870fc44c5efd70cc05677e9948a9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79464
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I00a567f417b1e22167923fc3193583138718dbbd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79463
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PIRQ_SCI is already defined as 0x10 and this also brings the definitions
more in line with Phoenix.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib2ab954b379d2edd0167d7fb229557600cbc4e48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
To quote its repo[0]: Wuffs is a memory-safe programming language (and
a standard library written in that language) for Wrangling Untrusted
File Formats Safely. Wrangling includes parsing, decoding and encoding.
It compiles its library, written in its own language, to a C/C++ source
file that can then be used independently without needing support for
the language. That library is now imported to src/vendorcode/wuffs/.
This change modifies our linters to ignore that directory because
it's supposed to contain the wuffs compiler's result verbatim.
Nigel Tao provided an initial wrapper around wuffs' jpeg decoder
that implements our JPEG API. I further changed it a bit regarding
data placement, dropped stuff from our API that wasn't ever used,
or isn't used anymore, and generally made it fit coreboot a bit
better. Features are Nigel's, bugs are mine.
This commit also adapts our jpeg fuzz test to work with the modified
API. After limiting it to deal only with approximately screen sized
inputs, it fuzzed for 25 hours CPU time without a single hang or
crash. This is a notable improvement over running the test with our
old decoder which crashes within a minute.
Finally, I tried the new parser with a pretty-much-random JPEG file
I got from the internet, and it just showed it (once the resolution
matched), which is also a notable improvement over the old decoder
which is very particular about the subset of JPEG it supports.
In terms of code size, a QEmu build's ramstage increases
from 128060 bytes decompressed (64121 bytes after LZMA)
to 172304 bytes decompressed (82734 bytes after LZMA).
[0] https://github.com/google/wuffs
Change-Id: If8fa7da69da1ad412f27c2c5e882393c7739bc82
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Based-on-work-by: Nigel Tao <nigeltao@golang.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78271
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure UART baud rate, Line Control register as 8n1 with FIFO
enable and enable UART TX and RX.
Change-Id: I090344a20430dc370a0b93ff7fbbae54111fae24
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79406
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I926ec4c1c00339209ef656995031026935e52558
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77637
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the MICRON MT62F1G32D2DS-023 WT:B RAM part for brox:
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
H9JCNNNBK3MLYR-N6E 0 (0000)
MT62F1G32D4DR-031 WT:B 1 (0001)
MT62F1G32D2DS-023 WT:B 2 (0010)
BUG=b:311450057,b:315913909
BRANCH=None
TEST=Run part_id_gen tool without any errors
Change-Id: Id120a5eb311d8299a8e59d2c1658fe0742e93934
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79459
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2d5efa948e8bd993ca4b5af80f664db687b8a766
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Early versions of CB:76519 had more devices enabled in the chipset
devicetree which shouldn't necessarily be enabled in the chipset
devicetree. Enable most of those in the Onyx mainboard's devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ieeb96755a007a5ca70e4c31df09325835bb8ef47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Disable the IOMMU PCI devices in the chipset devicetree. In order for
the IOMMU devices on the Onyx mainboard still be enabled, enable them in
the mainboard devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8c1bbbf370a3b5566a8484bcfa88dc4efa31222b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79409
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the xPRF call to report holes in memory and report those regions as
reserved.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5605499e39931e1a1592318310112666f8a0f144
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Use the xPRF call to report holes in memory to report those regions as
reserved.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: If89b08a31a9b9f8e7d2959d1bc45e91763fe565b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78922
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the device and chip entries for the various PCIe ports and MPIO
lane configuration. Below each PCIe bridge device with an external PCIe
port on the mainboard, an MPIO chip is added that provides the
corresponding MPIO configuration for this external PCIe port.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8563c5a07eb8fd8ff9dd4e7b63fc9a7d485b1316
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78921
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the openSIL MPIO chip driver that allows specifying the MPIO lane
configuration in the mainboard's devicetree instead of having this
configuration in a separate port descriptor C file.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I1d408a7eff22423612bc5eb9bfebaf0d86642829
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76520
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For now, we'll use a hard-coded SATA controller configuration that
should work in most cases instead of making everything configurable via
devicetree settings.
In the process of scrubbing opensil for public release SATA became non
functional.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ib37a081c0be4fdd2785e1dca70f376b967ce4462
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76518
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Drive board specific USB configuration from the coreboot devicetree into
the opensil input block.
In the process of scrubbing opensil for public release USB became non
functional.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I62eefe1061446612168dd27e673a2742903456c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78920
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Drive board specific USB configuration from the coreboot devicetree into
the opensil input block.
In the process of scrubbing opensil for public release USB became non
functional.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic41f57f3208aebb3a8b42f70cf558de50fa4de24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78919
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Genoa has no XHCI2 controller, so drop this devicetree option.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5b995bb1c0cf0032be25ab215333bc966427f7ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79454
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When preprocessing the linker script the target arch needs to be
specified.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Id18af3da93d2d06a2ebb83eddd03377c9026c8fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Adjust PL1 max value from 15W to 25W
BUG=b:314263021
TEST=emerge-rex coreboot
Change-Id: I4122a13d7e33c736299c1a759ec51f7a3b29340f
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79377
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ACPI spec defines keywords for the GpioInt and Interrupt resources
to specify whether a given pin is wake capable. Some boards are using
the ec sync interrupt pin to wake the system so the CREC _CRS needs to
be updated accordingly.
Provide a new macro that allows a board to specify whether its ec sync
pin is wake capable.
BUG=b:243700486
TEST=Dump ACPI and verify ExclusiveAndWake share type is set when
EC_SYNC_IRQ_WAKE_CAPABLE is defined
Change-Id: I483c801ff0fee4d3ce0a3b2fc220e0bd9356a612
Signed-off-by: Mark Hasemeyer <markhas@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Forest Mittelberg <bmbm@google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I22b9b6781f516b96724b67d1321dd71b98e0e0e3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79410
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Drive board specific USB configuration from the coreboot devicetree into
the opensil input block.
Add USB OC pins to chipset.cb
In the process of scrubbing opensil for public release USB became non
functional.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I506547a7abbb643d3e982e44a92f33b45cd739e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Enable the dummy function 0 that don't have an alias in the chipset
devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I607245c587a544007fd714f64901cbb50014612f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Update proximity sensor tuning value from dedede/kracko tuning.
Remove GPIO override to use the configuration from nissa baseboard:
- GPP_B5 ==> SOC_I2C_SUB_SDA
- GPP_B6 ==> SOC_I2C_SUB_SCL
BUG=b:310050220
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I7c687677a797415d80be4c420484d3346a8455f6
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79247
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Return the PCI segment group number from data_fabric_get_pci_bus_numbers
via pointer argument so that amd_pci_domain_scan_bus can handle the PCI
segment group numbers once coreboot supports more than one PCI segment
group. For now, just print an error and return if the buses are on a PCI
segment group other than 0.
TEST=Mandolin still boots
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia53cda0ba656201c2197d05bc0d4a8fbbe8ad5d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This patch records early signs of user activity during CSE firmware
synchronization or MRC (re)training events in the event
log (ELOG_TYPE_FW_EARLY_SOL).
These can be used to ensure persistence across global reset (e.g. after
CSE sync) so that they can be later retrieved in order to build things
such as test automation ensuring that we went through the SOL
path/display initialized.
BUG=b:279173035
TEST=Verified on google/rex, event shows in eventlog after CSE sync
and/or MRC.
Scenario #1: While performing MRC update
1 | 2023-11-08 | Early Sign of Life | MRC Early SOL Screen Shown
2 | 2023-11-08 | Memory Cache Update | Normal | Success
3 | 2023-11-08 | System boot | 9
4 | 2023-11-08 | ACPI Wake | S5
Scenario #2: While performing CSE update/downgrade
11 | 2023-11-08 | Early Sign of Life | CSE Sync Early SOL Screen Shown
12 | 2023-11-08 | System boot | 13
Scenario #2: While performing both MRC and CSE upgrade
16 | 2023-11-08 | Early Sign of Life | MRC Early SOL Screen Shown
17 | 2023-11-08 | Early Sign of Life | CSE Sync Early SOL Screen Shown
18 | 2023-11-08 | Memory Cache Update | Normal | Success
19 | 2023-11-08 | System boot | 16
20 | 2023-11-08 | ACPI Wake | S5
Change-Id: Idfa6f216194fd311bb1a57dd7c86fe7446a3597c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78983
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Meteor Lake Firmware Support Package (FSP-M) for ChromeOS includes an
pre-memory graphics driver which can be leveraged to display a text
message thanks to the following FSP-M UPD (Updateable Product Data):
- VgaInitControl (bitfield):
Bit 0: Turn on graphics, setup VGA text mode and display
`VgaMessage' text centered on the screen.
Bit 1: Clear text and tear down VGA text mode and graphics before
returning from FSP-M.
- VbtPtr (address): Pointer to the VBT (Video BIOS Tables) binary.
- VbtSize (unsigned int): Size of the VBT binary.
- LidStatus (boolean): Due to limited resources at early boot stages,
the text message is displayed on a single monitor. The lid status
helps decide which display is the most appropriate.
0: Lid is closed: show the text message on the external display if
available, do not display anything otherwise.
1: Lid is open: show the message on the internal display if
available, use an external display if available otherwise.
- VgaMessage (string): Text message to display.
If the `SOC_INTEL_METEORLAKE_SIGN_OF_LIFE' flag is set, coreboot
configures the UPDs above to display a text message during memory
training and CSME update. The text message can be configured via the
locale text mechanism using the `memory_training_desc' name.
The `SOC_INTEL_METEORLAKE_SIGN_OF_LIFE' selects the LZ4 compression
algorithm for VBT because LZMA decompression is not available in
romstage by default and adding LZMA support increases the romstage
binary size more than the VBT binary is reduced.
BUG=b:279173035
TEST=Text message is displayed during memory training on a rex board
Change-Id: I8e7772582b1895fa8e38780932346683be998558
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78244
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds a function to check if a CSE FW update is required
during this boot. The function is expected to be used during use
cases like Pre-Memory Sign of Life text display to inform user of
a CSE Firmware update.
Bug=279173035
TEST=build and boot on google/rex board. Call the function in romstage
and confirm it returns True during CSE FW update and False otherwise
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: If5fae95786d28d586566881bc4436812754636ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78243
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
By default MarginLimitCheck and RMC UPDs are enabled in FSP
which enables fast and cold boot retraining causing the
boot time increase. So, disabling the same UPDs to fix it.
Change-Id: Ib15d37dbe177f31590f23de4e239a2e82abf1335
Signed-off-by: Kilari Raasi <kilari.raasi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Update header files for FSP for Meteor Lake platform to
version 3424_88, previous version being 3323_86.
FSPM:
1. Add `MarginLimitCheck` UPD
2. Add pre-memory graphics UPDs i.e `LidStatus`,
`VgaInitControl`,`VbtPtr`,`VbtSize`,`VgaMessage`
3. Address offset changes
FSPS:
1. Add `Usb4CmMode` UPD
2. Address offset changes
BUG=b:310108425
TEST=Able to build and boot google/rex to ChromeOS.
Change-Id: I3f71cd739a607318fda06fa50d4a379d64857458
Signed-off-by: Kilari Raasi <kilari.raasi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78997
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
LLVM/clang 17 removed support for CSR names that are no longer included
in the RISC-V ISA Manual Privileged Specification since version 1.12.
Related LLVM commit: https://reviews.llvm.org/D149278
Change-Id: I7c8f2a06a109333f95230bf0a3056c8d5c8a9132
Signed-off-by: Lennart Eichhorn <lennarteichhorn@googlemail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Tell the resource manager in openSIL to distribute the available IO and
MMIO ranges across the different PCI root bridges.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0985712bc4e87b4068dea22bde1dfa371a6c47bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
vboot_fw.a is built via a sub-invocation of make, but make is not able
to track dependencies between different invocations. That means the
toplevel make assumes that the vboot_fw.a target depends only on the
dependencies explicitly listed in coreboot's Makefile (only config.h in
this case), and thus assumes that if config.h didn't change it does not
need to rebuild the library. This breaks incremental builds when files
inside the vboot repository change.
This patch marks the target as .PHONY so that it will always be rebuilt.
The vboot Makefile's own dependency tracking will then ensure that on an
incremental build we only rebuild the vboot sources that actually
changed, so if nothing changed this will just add a simple and quick
$(AR) call.
Change-Id: I8bdd4e1589124914ba1e877e04b40ee709ea4140
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79375
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Updated Linux FW works with PCI gen3 speed and PSPP.
This reverts
commit 05c9a850fd21 ("mb/google/nipperkin: Fix WLAN to GEN2 speed")
https://review.coreboot.org/c/coreboot/+/63593
and
commit 76fddd963925 ("mb/google/nipperkin: Disable PSPP for WLAN")
https://review.coreboot.org/c/coreboot/+/63722
The changes are overlapped and are reverted together.
BUG=b:240426142 & b:228830362
The system is able to ran over 2500 cycles on Nipperkin with command
suspend_stress_test -c 10000 --wake_min 10 --suspend_min 10 \
--nofw_errors_fatal
The whole variant_update_dxio_descriptors is empty and is pushed back
to weak function.
Change-Id: Id207076542edc8ea0cabc6e02e29856c2b6803c7
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Use the generic resource_consumer method which works for memory both
above and below 4G.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I1bc553b18d08cee502b765166227810f8e619631
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76181
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Enable BT offload when I2S option is selected for screebo.
BUG=b:275538390
TEST=Verified audio playback using BT speaker/headset in I2S mode on google/screebo.
Fixes: https://review.coreboot.org/c/coreboot/+/77755
Change-Id: I7ebe8e28d35428ce2fb8129dc145fec9ac60f9da
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79378
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Due to TCPC0 & TCPC1 exchanged compare to Neried design,
but related USB2 Ports not exchanged, keep mainboard C port to conn0.
BUG=b:312998945
TEST=can boot from external Type-c USB disk
Change-Id: Ib8df4a256bd9cd1b2ca229b09d68f97babc8092e
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79372
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Update brox devicetree based on the latest schematics.
- Configure typeC to EC mux ports settings.
- Configure USB2/USB3 ports settings.
- Configure TCSS ports settings.
BUG=b:311450057
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: Iac5a2e8be6cea64f107d267d4cf71529f08bb63d
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79391
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The device/device.h provides the definition for struct device used in
those files, so include this header file to make sure that it's not only
included indirectly via some other header file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6ff7cdbf0f53ada92adb53cf268e5feee9df4629
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
CLKREQ programming as currently implemented is completely dependent on
FSP DXIO descriptors, so move under common/fsp/pci and rename the
Kconfig to reflect the move.
TEST=build google/{guybrush, skyrim, myst}
Change-Id: I87b53d092ddc367b134c25949f9da7670a6a1d88
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
- First a console is set up for opensil.
- After that a region in CBMEM is reserved and passed to opensil which
will use it as a buffer for input/output information.
- Finally opensil is called and the return value handled.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I4833a5a86034a13e6be102a6b68c3bb54108bc9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add the support LP5 RAM parts for brox:
1. HYNIX LPDDR5 6400 2GB H9JCNNNBK3MLYR-N6E
2. MICRON LPDDR5 6400 4GB MT62F1G32D4DR-031 WT:B
DRAM Part Name ID to assign
H9JCNNNBK3MLYR-N6E 0 (0000)
MT62F1G32D4DR-031 WT:B 1 (0001)
BUG=b:311450057
BRANCH=None
TEST=Run part_id_gen tool without any errors
Change-Id: Ib17f26a310435e37088191594863a645aa751440
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79392
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Since the EHCI controllers in the PCH are always on the same device
functions, the device operations can be statically assigned in the
devicetree and there's no need to bind the EHCI device operations to the
PCI devices during runtime via a list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I92ecc3607216fb2f31639db9628898c9ce81770d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79171
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Since the XHCI controller in the PCH is always on the same device
function, the device operations can be statically assigned in the
devicetree and there's no need to bind the XHCI device operations to the
PCI device during runtime via a list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8685bec734415346a53330c9bd1aa82986995f1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79170
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Since the PCI bridge in the PCH is always on the same device function,
the device operations can be statically assigned in the devicetree and
there's no need to bind the PCI bridge device operations to the PCI
device during runtime via a list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic9ca925a12e64c9a5b3bf295653bf032572ff29a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79169
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Since the SMBus controller in the PCH is always on the same device
function, the device operations can be statically assigned in the
devicetree and there's no need to bind the SMBus device operations to
the PCI device during runtime via a list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3d3745ba5aefa30efbe705155d216aa7eadd26a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79168
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I05e7ba10e499ea1e824bdd6c87df05fc5a0864f8
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79400
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Function 0 of the device that has the bridges to other buses is a dummy
function that can be left enabled to not have to shuffle around the
device function numbers when the first PCI bridge on that device isn't
enabled. That dummy device function is however not a PCI host bridge, so
change the comment from 'Dummy Host Bridge' to 'Dummy device function'.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Nico Huber <nico.h@gmx.de>
Change-Id: I6069205bd2e1cb0f75025e9f330afc50462e742a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79397
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Function 0 of the devices that have the bridges to other buses are dummy
functions that can be left enabled to not have to shuffle around the
device function numbers when the first PCI bridge on those devices isn't
enabled. Those dummy device functions are however not PCI host bridges,
so change the comments from 'Dummy Host Bridge' to 'Dummy device
function'.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Nico Huber <nico.h@gmx.de>
Change-Id: Ibddfdf558d84bc44434d718b86f41bd06044b22a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
BUG=b:305793886
TEST=util/abuild/abuild -p none -t google/rex -x -a -b deku
Change-Id: I41a64252f08304ffc66fd782e54720252064ca49
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79398
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add defaults for the CONSOLE_UART_BASE_ADDRESS Kconfig symbol so that
the SeaBIOS payload will know where the MMIO address of the UART is to
build successfully without any additional user input during the build.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia05c3531cdbf3fd3e2e5f81b9d652f9dfef2111a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79395
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Add support for generating GIC subtable ITS (Interrupt Translator
Service).
Change-Id: I1bcb3ad24de64cbba8aeef7ba7254d3157e0dc43
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Input Output Remapping Table (IORT) represents the IO topology of an Arm
based system.
Document number: ARM DEN 0049E.e, Sep 2022
Change-Id: I4e8e3323caa714a56882939914cac510bf95d30b
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
While acpidump_print shouldn't be called with a NULL pointer as
table_ptr argument, better add a check to not end up dereferencing the
NULL pointer.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic3cc103c8a47fb8c2fe4262236ea47013af27c4f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79393
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
Since the LPC bridge in the PCH is always on the same device function,
the device operations can be statically assigned in the devicetree and
there's no need to bind the LPC bridge device operations to the PCI
device during runtime via a list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I366226be4aba75b98e45e4832bfe129fac14dbfa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Fix up the memory config for brox based on the schematics. Also,
since memory training needs to happen in romstage, initializing the
MEM_STRAP & MEM_CH_SEL gpios for use in romstage. Also consolidating
the GPIOs needing to be initialized in romstage into the baseboard
gpio.c file.
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: I17615cda7df10e73e49fb49f736728787ef7625d
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1e8c8b3e3672d1589a5910753986e4033d2ce766
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79116
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Building the Lenovo T60/T60p, iasl 20230628 shows the remark below:
dsdt.asl 2099: PowerResource (FPwR, 0, 0)
Remark 2182 - ^ At least one lower case letter found in NameSeg, ASL is case insensitive - converting to upper case (FPWR)
dsdt.asl 2118: Name (_PR0, Package () { FPwR })
Remark 2182 - ^ At least one lower case letter found in NameSeg, ASL is case insensitive - converting to upper case (FPWR)
Address it by making it all upper case.
Change-Id: Ia7924b015e76c43818d2d82da35ce0013d721c26
Fixes: 3ab13a8691cb ("ec/lenovo/h8/acpi/thermal: Add support for passive cooling")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79367
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch allows variants to override the default baseboard PLx
limits.
Additionally, rearrange the include header files alphabetically.
BUG=b:313667378
TEST=Able to boot google/screebo with modified power limits.
Before:
[DEBUG] WEAK: src/mainboard/google/rex/variants/baseboard/rex/
ramstage.c/variant_devtree_update called
[INFO ] Overriding power limits PL1 (mW) (10000, 15000)
PL2 (mW) (40000, 40000) PL4 (W) (84)
After:
[INFO ] Overriding power limits PL1 (mW) (10000, 15000)
PL2 (mW) (40000, 40000) PL4 (W) (84)
Change-Id: Ic66872c530963238a0bf5eebbd5b5a76a7985e5c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Update BND_NORTH_APB2_S's domain 5 permission to allow the access from
APU. The APU requires certain information saved in BND_NORTH_APB2_S for
voltage tuning. If this information cannot be retrieved, the APU may
operate at a high frequency with low voltage. Consequently, the APU may
not function as expected.
Change-Id: I967b138dc5517e54da7fbf94b9e502e478c991b5
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>
Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79348
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For ChromeOS platform the recovery reason is cleared in
vb2api_kernel_phase2 which is probably not called by any non-ChromeOS
system. It results in the platform being stuck in recovery mode, e.g.
when RW firmware verification fails. Even if the RW partition is
flashed with correctly signed image, the persistent non-zero recovery
reason will prevent vboot from attempting the RW partition check.
Use the newly exposed vb2api_clear_recovery and
VBOOT_CLEAR_RECOVERY_IN_RAMSTAGE Kconfig option to clear the recovery
reason and save it immediately to the VBNV. The idea is to let
non-ChromeOS coreboot platform to clear the recovery reason when
needed.
TEST=Clear the recovery reason in mainboard_final function right
before payload jump when RW partition is corrupted and RW partition is
valid. In case it is corrupted, the platform stays in recovery mode,
when valid the platform boots from RW partition. Tested on MSI PRO
Z690-A DDR4.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I7ffaf3e8f61a28a68c9802c184961b1b9bf9d617
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74343
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use existing macro instead of open coding magic numbers.
No functionality change.
Change-Id: If45f7f3f2b4226cedde6ff91b9848b9875f45f9f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79148
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
+-------------+----------------+------------+
| USB 2.0 | Connector Type | OC Mapping |
+-------------+----------------+------------+
| 1 | Type-C | OC_0 |
+-------------+----------------+------------+
| 2 | Type-C | OC_0 |
+-------------+----------------+------------+
| 3 | Type-C | OC-0 |
+-------------+----------------+------------+
| 4 | Type-A | OC_3 |
+-------------+----------------+------------+
| 5 | Type-C | OC_0 |
+-------------+----------------+------------+
| 6 | Type-A | OC_3 |
+-------------+----------------+------------+
| 7 | Type-A | OC_3 |
+-------------+----------------+------------+
| 8 | Type-A | OC_3 |
+-------------+----------------+------------+
| 9 | Type-A | OC_3 |
+-------------+----------------+------------+
| 10 | BT | NA |
+-------------+----------------+------------+
+---------------------+-------------------+------------+
| USB 3.2 Gen 2x1 | Connector Details | OC Mapping |
+---------------------+-------------------+------------+
| 1 | Type-A | OC_3 |
+---------------------+-------------------+------------+
| 2 | Type-A | OC_3 |
+---------------------+-------------------+------------+
+------+-------------------+------------+
| TCPx | Connector Details | OC Mapping |
+------+-------------------+------------+
| 1 | Type C port 0 | OC_0 |
+------+-------------------+------------+
| 2 | Type C port 1 | OC_0 |
+------+-------------------+------------+
| 3 | Type C port 2 | OC_0 |
+------+-------------------+------------+
| 4 | Type C port 3 | OC_0 |
+------+-------------------+------------+
BUG=b:305793886
TEST=util/abuild/abuild -p none -t google/rex -x -a -b deku
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I90d3d984af6d40efb4553cf5675617700161d2d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79356
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add default Intel DPTF.
BUG=b:305793886
TEST=util/abuild/abuild -p none -t google/rex -x -a -b deku
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: Id681754fc8e7b418de35f66df097cadd4aad7448
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
google/deku is a Chromebox featuring two LAN ports.
Add overridetree.cb entry to configure the LAN0 LAN1 devices.
BUG=b:305793886
TEST=Built FW image correctly.
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I8980dabc7f9fc731a2b60c599e1e48c9b11dabb4
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79292
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch adds the power limit configuration for MCH ID index 3 aka
0x7d14 DID which is identical to MCH ID 0x7d01 (index 1).
TEST=Able to perform power limit configuration for google/ovis.
[DEBUG] WEAK: src/mainboard/google/rex/variants/baseboard/ovis/
ramstage.c/variant_devtree_update called
[INFO ] Overriding power limits PL1 (mW) (19000, 28000)
PL2 (mW) (64000, 64000) PL4 (W) (120)
Change-Id: Iff71adb4e26d18970b5947927c258419f751de32
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79332
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This patch removes the deprecated PL_PERFORMANCE and PL_BASELINE
configurations, relying instead on the refactored power limit flow.
This flow allows for seamless overrides by the baseboard and/or by
the variant board, if necessary.
Specifically, this patch:
- Removes PL_PERFORMANCE and PL_BASELINE configuration options from
mainboard.c in the google/rex directory.
- Relies on the baseboard_devtree_update() function, which is
implemented by the respective baseboard, to handle power limit
configuration.
- Leverages the variant_devtree_update() function, which is a
__weak implementation, to allow overrides by the variant directory.
This simplification improves code readability and maintainability while
maintaining the flexibility to handle power limit configurations as
needed.
Change-Id: I872e5cb59d7b2789ef517d4a090189785db46b85
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79331
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch ensures that the LidStatus UPD is passed a dynamic value,
rather than always passing 1 (CONFIG_RUN_FSP_GOP enabled) for FSP 2.0
devices.
Problem statement:
* FSP-S GFX PEIM initializes the on-board display (eDP) even when the
LID is physically closed, because LidStatus is always set to 1.
* FSP-S skips external display initialization even when the LID is
closed.
Solution:
* FSP-S GFX PEIM module understands the presence of an external display
if LidStatus is not set, and tries to probe the other display
endpoint.
* Statically passing LidStatus as always enabled (aka 1) does not
illustrate the exact device scenarios, so this patch updates
LidStatus dynamically by reading the EC memory map offset.
BUG=b:313886118
TEST=Able to build and boot google/marasov to redirect the display
using external HDMI monitor while LID is closed.
Change-Id: Idb1d71bd54837630f36d43a45effc53d35f9cb70
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79352
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds code to generate Processor Properties
Topology Tables (PPTT) compliant to the ACPI 6.4 specification.
- The 'acpi_get_pptt_topology' hook is mandatory once ACPI_PPTT
is selected. Its purpose is to return a pointer to a topology tree,
which describes the relationship between CPUs and caches. The hook
can be provided by, for example, mainboard code.
Background: We are currently working on mainboard code for qemu-sbsa
and Neoverse N2. Both require a valid PPTT table. Patch was tested
against the qemu-sbsa board.
Change-Id: Ia119e1ba15756704668116bdbc655190ec94ff10
Signed-off-by: David Milosevic <David.Milosevic@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
