| Age | Commit message (Collapse) | Author |
|---|
|
This patch provides the functionality to enable downshift on Marvell
PHY. By setting a downshift counter, the PHY is correspondingly often
attempted to establish Gigabit link before the PHY downshifts to the
next highest speed. The range is limited to 8 trials. To activate
downshift, a software reset must follow to take effect.
Change-Id: I4224eab6c1fc13824d53556c80435bc130a13bdb
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69853
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On this mainboard Marvell PHY INTn is routed to LED[2] pin.
Change-Id: I28a78afdcf0599bb998f906ce8056a0586e24f33
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69434
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
INTn on Marvell PHY can be routed to LED[2] pin. This setting must be
made via LED Timer Control Register on page 3.
Change-Id: Ida1efbb604c382676b9d13ac8bf14de768f93637
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69433
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This mainboard has three Marvel PHYs connected to the internal SOC GbE
controllers. The default LED status after HW reset of this PHYs shows a
different mode than what is needed. LED[2] is not connected on this
mainboard.
This patch sets the following LED status:
LED[0] - 7 = On - 1000 Mbps Link, Off - Else
LED[1] - 1 = On - Link, Blink - Activity, Off - No Link
LED[2] - not connected
TEST=Try different register values to verify LED feature.
Change-Id: I51d817bc720bf787279777f503efdc17dbb1274d
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69387
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For Marvel PHY it could be necessary to customize the shown LED status
at the connector. The LED status can be changed via Function Control
Register on page 3.
Link to the Marvell PHY 88E1512 datasheet:
https://web.archive.org/web/20221109080111/https://www.marvell.com/content/dam/marvell/en/public-collateral/phys-transceivers/marvell-phys-transceivers-alaska-88e151x-datasheet.pdf
Change-Id: Ia71c43f4286f9201f03cb759252ebb405ab81904
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69386
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch provides helper functions to read or write a register via the
MDIO bus. They can be used from drivers to easily access registers on
the MDIO bus.
Change-Id: I293d93435d27269a071b4b9b94a1b55307c575a7
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69611
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This driver enables the usage of an external Marvell PHY 88E1512 which
should be connected to a SOC internal MAC controller. In a first step it
is only the framework of the driver. Functionality will follow with a
second patch.
Change-Id: I24011860caa7bb206770f9779eb34b689293db10
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69384
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch refactors the MDIO access for the TSN GbE device by placing
the MDIO read and write functions into mdio_bus_operations struct which
is assigned to the .ops_mdio member of the PCI device struct. In this
way the MDIO interface of the TSN GbE device is exposed and can be used
by other drivers if needed.
Change-Id: I5d1b9dd2f2ba8c18291fff314c13f0c3851784aa
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69383
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This patch extends the available device paths with a new device 'mdio'.
MDIO is the 'Management Data Input/Output' called interface which is
used to access an Ethernet PHY behind a MAC to change settings. The real
payload data path is not handled by this interface.
To address the PHY correctly on the MDIO bus, there is a 5 bit address
needed, which often can be configured via pins on the mainboard.
Therefore, the new introduced device has an 'addr' field to define its
address. If one wants to use a MDIO device in devicetree, the syntax is
straight forward (example):
device mdio 0x2 on end
As the MDIO interface is driven by the MAC, most likely this MDIO device
will be hooked in as a child device of the (PCI attached) MAC device.
With the new introduced ops_mdio a new interface is added to provide an
API for read and write access over MDIO.
Change-Id: I6691f92c4233bc30afc9029840b06f74bb1eb4b2
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69382
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch skips setting D0I3 bit for all HECI devices by FSP.
The learning being made from Alder Lake platform showed that the CSE
EOP cmd response time is highly nondeterministic and letting the EOP
cmd issued by FSP makes the response time even worse.
The idea being pursued during Alder Lake platform is to let FSP skip sending the EOP cmd and coreboot sends it at the last minute
(late sending of EOP) to ensure there is ample time for CSE to come
to a state where the response to the EOP is almost immediate.
There were a number of refactoring being done to ensure the EOP cmd
can be sent at the later stage.
#1: Ensure FSP is not putting those HECI devices into the D0i3. (SoC specific change)
#2: Modify the CSE related boot state based operation to allow a
proper window for sending late EOP cmd. (Common Code Specific change)
The entire refactoring helps us to save ~60ms of boot time.
Without those code change EOP sending timestamp as below:
943:after sending EOP to ME 1,248,328(61,954))
With those code change EOP sending timestamp as below:
943:after sending EOP to ME 1,231,660 (2,754)
Port of commit d6da4ef69e4e ("soc/intel/alderlake: Skip setting D0I3
bit for HECI devices") to incorporate the #1 which is a SoC specific
code change.
BUG=none
TEST=FSP-S UPD dump suggested `DisableD0I3SettingForHeci` UPD is
set to `1`.
Excerpt from google/rex coreboot log:
[SPEW ] DisableD0I3SettingForHeci : 0x1
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I1c3765ce41f192ab5f5ff176e0a2b49b312d18d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Adjust SPD ID order
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
H9JCNNNBK3MLYR-N6E 1 (0001)
MT62F1G32D4DR-031 WT:B 2 (0010)
H9JCNNNCP3MLYR-N6E 3 (0011)
BUG=b:254365935
BRANCH=None
TEST=run part_id_gen to generate SPD id
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I3a62cf355508debce387c48d9d089e73763b2bf0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69784
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adding cros_gpios for crossystem to access WP GPIO
BUG=b:258048687
TEST= run FAFT firmware_WriteProtect passed.
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Change-Id: Ieac1df805c6399aefdc13aae136630d496aacd58
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69924
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The brask doesn't include a real chassis so we don't need to configure
the fan setting in the overridetree.cb. Instead, we can leave the fan
running at full speed after the device boot up.
BUG=b:259643676
BRANCH=firmware-brya-14505.B
TEST=flashed the bios to the device and make sure the fan spinned
at full speed.
Change-Id: I6075b6171ca4d7b907679efd0ce7e355759385bc
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Based on the latest schematic to update the gpio table.
BUG=b:239513596
TEST=emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: Ifaf0629dcd77d21cf09fe84e760f1f22c075467f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Override devicetree configuration based on the latest gaelin schematic.
BUG=b:249000573, b:254375472
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=emerge-brask coreboot
Change-Id: I3a741feec52cf73da8d6ec0b03cc93d6a4cba256
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Update devicetree setting per the schematic.
BUG=b:239513596
TEST=emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: I8746d44daa43c06723bdfcac6803eb90a3c124b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Update the fields that need to be updated directly in the local static
usb_phy_config struct instead of dereferencing the pointer written to
the corresponding UPD field. This will allow updating the type of UPD
field in a follow-up commit to enable 64 bit coreboot builds.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I44a9fe719e6803fc957fee3db13b261489ed313d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69896
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This ports forward part of commit df0968062622 ("soc/amd/picasso: Add
support for 64bit builds") to the newer AMD SoCs.
Use -Wl instead of -l to get the output format that the commands in the
Makefile expect to extract the value for PSP_BIOSBIN_SIZE. Without this
change, readelf will split the output into two lines in case of a 64 bit
coreboot build. This results in invalid amdcompress and amdfwtool
command lines which will cause the amdfwtool call to fail with
Error: BIOS binary destination and uncompressed size are required
With the old readelf -l command we get this output in a 64 bit build:
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000080 0x0000000002030000 0x0000000002030000
0x0000000000010000 0x0000000000010000 RWE 0x10
while we get the correct output in a 32 bit build:
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000060 0x02030000 0x02030000 0x10000 0x10000 RWE 0x20
With readelf -Wl we also get the expected output in a 64 bit build:
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000080 0x0000000002030000 0x0000000002030000 0x010000 0x010000 RWE 0x10
TEST=This fixes the 64 bit build on Cezanne with some follow-up patches
applied.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I35f9feda4d0da3546592dfac233ca66732bd5464
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69895
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This reverts commit 7203aa5c2dcb90e50356305cabbe062bd4f4dc76.
BUG=b:260138434
TEST=None
Cq-Depend: chrome-internal:5126951, chromium:4049177
Change-Id: Ieaa44a33a7c65d384581b5145821b449783ca3fa
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Skip eDP initialization when we failed to get EDID. This prevents the
PLL assertion in dp_intf_config() if the display could not be
initialized properly.
BUG=b:233720142
TEST=boot to depthcharge on MT8188 EVB.
Change-Id: I0fd672b175feb9b813c1d9ec4140e4273079ff07
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69858
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic6c711fe3fad19c24ca4c01f8d0a4bc002f14bd6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69807
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use post_code() instead of 'outb(value, CONFIG_POST_IO_PORT)'.
Change-Id: I1ba6bff810b61a1249cda6e96eb40f4a81381322
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69901
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
All parameters of DPTC_INPUT() need to be configured on devicetree
when SOC_AMD_COMMON_BLOCK_ACPI_DPTC is enabled. The parameters without
configurations on devicetree would be 0 when
SOC_AMD_COMMON_BLOCK_ACPI_DPTC is enable. Follow AMD DevHub document
#57316. Configure vrm_current_limit_mA, vrm_maximum_current_limit_mA
and vrm_soc_current_limit_mA on devicetree with thermal table config E
as default table for SMT. Since the dynamic thermal table switching
mechanism is still under cooking, after discussing with thermal team,
suggest adopting config E(limit Soc not reach to max power) as default
thermal config to avoidany thermal-related issue during phase build.
Once the dynamic thermal table switching mechanism is finished, will
change the default value to config A.
BUG=b:258572474, b:248976976, b:259167917, b:257394883
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: Ic1e7a46cac4119c7237d96a7bd0d23c8db028680
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
This patch helps to save 10.200ms of booting time without any issue
seen during MP Init. All cores are out from reset and alive.
Port the Alder Lake 'commit 6526e7896727 ("soc/intel/alderlake: Select X86_INIT_NEED_1_SIPI Kconfig for RPL")' also to Meteor Lake.
Additionally, no performance degradation is observed while running
benchmarks.
BUG=b:211770003
TEST=Able to boot Google, Rex to ChromeOS with all cores enabled.
Without this patch:
30:device enumeration 1,480,217 (28,232)
With this patch:
30:device enumeration 1,472,466 (18,334)
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iec21470b9b34514169789c39bdc3be4e4ff6c7b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69851
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For the most part, this just moves the existing post codes into macros
so that they're not just bare numbers.
cache_as_ram.S:
Post code 0x28 was previously pointless with just a single jump between
it and post code 0x29, car_init_done. This code was removed, and the
0x28 value was used to differentiate the car_nem_enhanced subroutine
from the other 0x26 post codes used before calling the clear_car
subroutine.
All other post codes remain identical.
POST_BOOTBLOCK and POST_CODE_ZERO are expected to become global, whereas
the POST_SOC codes are expected to be Intel only.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I82a34960ae73fc263359e4519234ee78e7e3daab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69865
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This moves a lot of post code values, but unifies them between
platforms, so that the same value means the same thing as much as
possible.
The P4-netburst code was the most extensive and most different, so that
dictated the majority of the values. Three were two values there that
didn't match the other files, so those two values, 0x22 & 0x29 have
duplicate entries in the table.
The rest of the entries are similar between platforms, though the values
for many of them were moved to match the P4-netburst values.
POST_BOOTBLOCK and POST_POSTCAR values are intended to eventually become
global, while POST_SOC would be specific to the Intel platforms.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If13e40b700a41d56bca85510d68da0ab31a235a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69866
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It shouldn't be assumed that all variants of skyrim will use the same
gpio for TPM interrupts.
Use the PSP's new mailbox command to tell it what gpio the tpm interrupt
comes in on.
BUG=b:248193764
TEST=tast run <ip> hwsec.TPMContest
Verify log entry:[DEBUG] PSP: Setting TPM GPIO to 18...OK
Use incorrect GPIO in mailbox cmd and verify TPMContest test
failed.
Signed-off-by: Mark Hasemeyer <markhas@google.com>
Change-Id: I9f4005e10987caf9f32e5ac99ff5f2b9467e586c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69874
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I3c077dee1c14e4aa45f837361daf799f02d32a29
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69818
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib20f02cc9e5be0efea8bc29fce6bd148adf28ead
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69817
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I00551dfd963d47a58284bc31f21b0fa12130fe78
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69816
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If6c1a17d15e24ecdc56b0cc9cb7e7dc7d6e6936b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69813
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I32b41eded11e4e575627fec3947a75c08fdfd0a6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69812
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ieb094096e9e204e59a1f3fcf716d906e7736fb43
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69811
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I096e88158027ac22cf93a9450c869807dbc14670
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69810
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I871579cc434820294f285298fe43da4cd1da27a3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69809
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If4564abf060410726b0b245ba002a35ca9d30769
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69808
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib82968724696110a8d1655928db5b2a665525d20
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69805
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I11593245fedc26489e3506d773aaff1ad34188b1
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69804
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I16689da893b5a0c3254364759d435281cb3e1caf
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69803
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie6def0dab9ac37c0938b73d27148a49531c6b17f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69802
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I12463d4d26c03c85fa018b421bb9166fbfeb0b60
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69801
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ibd41382d0e0ef58498ac925dc9e10b54a76a798a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69800
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For nissa, the ISH main firmware will be included in the CSE region in
flash instead of loading it from rootfs. So remove the ISH
firmware-name.
BUG=b:234776154
TEST=Boot to OS on nirwen and yaviks UFS SKUs. Check ISH firmware is not
loaded by kernel, and device still goes to S0i3.
Cq-Depend: chrome-internal:5102230
Change-Id: I68f963e17bc0dbf9db9adaaa3f96f06b8737523b
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69868
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
BUG=b:253387689
Test:Boot to OS on craask and check SAR Proximity Sensor GPIO pin
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I2b2a2516890b68036e96d1a542e6a10a098cb6a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69790
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Move smbios_ec_revision to ocp folder so that all ocp boards
share the same function without implementing again.
TESTED=Execute "dmidecode -t 0" to check corresponding field.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Jonzhang Zhang <jonzhang@meta.com>
Change-Id: I898662b78d3dbab1861cee6f1b6e148297a5d11b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68785
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7af61404d11f7e0ff5f30c42958c4dd9318538fa
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie5355e05982b372ef69515cfa081e2afbc7b09fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
CBFS_MCACHE is currently experiencing overflow with CBFS verification
enabled. Reduce the pre-x86 cbmem console size from ~5.5 KiB to 4 KiB.
This reduction along with the available free space in PSP shared buffer
(32 KiB) helps to increase the CBFS_MCACHE size from 8 KiB to required
14 KiB.
BUG=b:259342909
TEST=Build and boot to OS in Skyrim. Ensure that there are no CBFS
mcache overflows.
FMAP: area COREBOOT found @ 80a000 (8347648 bytes)
VB2:vb2_digest_init() 0 bytes, hash algo 2, HW acceleration unsupported
CBFS: mcache @0x00019a40 built for 67 files, used 0x19a0 of 0x1c00 bytes
CBFS: Found 'apu/amdfw_a' @0x0 size 0x3ff80 in mcache @0x0001b640
VB2:vb2_digest_init() 262016 bytes, hash algo 2, HW acceleration enabled
Ensure that firmware_CbfsMcache FAFT test is successful.
Change-Id: I35e1a8c6d73e0870b6a43aac604f83a0b6c3aabe
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69827
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Remove SSE when SSE is already selected by supported CPUs.
Add "config SOCKET_SPECIFIC_OPTIONS" section to socket_p/Kconfig.
Change-Id: If2265ac716e90720e7ccc550239737d40c2f7a0a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Iab76316f345fb0cf2ca2a3eaf40f64a1f1b7fc13
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69814
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
VB2_FIRMWARE_WORKBUF_RECOMMENDED_SIZE is nowadays defined in
vboot/firmware/2lib/include/2constants.h, so update the comment.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia7c9a5476ae06d4bac762da1729aff878b7d0965
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
The patch parses CPU and PCH Trace Hub modes from the debug area in the
Descriptor Region. The modes can be updated in the debug area in order
to configure the CPU and PCH Trace Hub modes. The debug area's offset
starts from the SPI Flash offset:0xf00.
For runtime debugging, the OEM Section in the Descriptor Region is being
used as debug area. The OEM Section details are documented in the SPI
Programmer Guide of CSE Lite kit.
TEST=Build code for Gimble
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I61241c5c1981ddc4b21581bb3ed9f531da5f41b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
field STORAGE 30 31
option STORAGE_UNKNOWN 0
option STORAGE_NVME 1
option STORAGE_UFS 2
end
BUG=b:254365935
TEST=emerge-brya coreboot.
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I17f8a852808d279a1f2b08b364cd4e525a807560
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69786
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
One register configuring multi-pin functions was outside of the Global
Configuration Registers space and skipped in the initial port patches.
Replicate the vendor configuration and set the Super I/O pin for PECI
functionality.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I90f142a1a9ee27dd061fc71b791bd4c7df97da6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68711
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add pcie_find_dsn() to detect and match PCIe device serial
number. In addition, vendor ID is matched when provided.
Change-Id: I54b6dc42c8da47cd7b4447ab23a6a21562c7618
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Add initial CEDT (CXL Early Discovery Table) support based on
CXL spec 2.0 section 9.14.1.
Add functions to create CEDT table (revision 1), and create CEDT
CXL Host Bridge Structure (CHBS) and CXL Fixed Memory Windows
Structure (CFMWS).
TESTED=Create CEDT table on Intel Archer City CRB, dumped the
CEDT table and examined the content.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I4fbce78efc86ad9f2468c37b4827a6dadbdc6802
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64263
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
There is a note about the default I2C speed of this being 400 kHz
despite the logic in rx6110sa.c sets the fallback (correctly) to
100 kHz.
This information originally comes from the fact the dw_i2c bus
controller default speed is 400 kHz. This is irrelevant to
the default speed of this device as it can be used with any
bus controller.
BUG=none
TEST=coreboot builds correctly (no functional changes).
Change-Id: Ic0ffe5667574c59e1c1df952b84b8a3680b53341
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69545
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit doesn't add any new format options, just makes selecting
existing format explicit.
Ticket: https://ticket.coreboot.org/issues/422
Change-Id: I3903aff54e01093bc9ea75862bbf5989cc6e6c55
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68746
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
This change enables the DisplayPort detection at preboot for Rex board.
BUG=b:247670186
TEST=Built image and validated DisplayPort feature at preboot on Rex.
Change-Id: I1a8a13e937c7132696aa39d85c3c6b6fb2dd13a5
Signed-off-by: zhaojohn <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67742
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
After DisplayPort is plugged into type-C port, its hpd signal
instantly presents and EC has mux_info for dp and hpd. This change
fixes the DP detection flow to avoid the 1 second delay while no DP
is connected. If DP is present, there will be requests towards PMC
through the sequence of connect, safe mode, dp and hpd mode.
BUG=b:247670186
TEST=Built image and validated the DisplayPort preboot feature on Rex.
Change-Id: I7cb95ec7fcc7e1a86e86466e6d45390eedcc4531
Signed-off-by: zhaojohn <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Update definitions on glinda used by birman.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I03065011581489b5345c16e225edc341e1d7811c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Update definitions to match morgana FSP.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ic893526789c05a298965702114d4a814466a5742
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
EC_HOST_EVENT_USB_CHARGER is no longer defined by the EC, so remove all
references.
BUG=b:216485035,b:258126464
BRANCH=none
TEST=none
Change-Id: I9e3e0e9b45385766343489ae2d8fc43fb0954923
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
BUG=b:235919755
Test=Check error message "Exposing GPIOs in Power Resource and _CRS"
not show in firmware log.
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I21a47adde48555098d041b94d483cad308bdb717
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Set `EnableTcoTimer=1` in order to keep FSP from
1) enabling ACPI Timer emulation in uCode.
2) disabling the PM ACPI Timer.
Both actions are now done in coreboot.
`EnableTcoTimer=1` makes FSP skip these steps in any possible case
including `SkipMpInit=0`, `SkipMpInit=1`, use of the MP PPI or FSP
Multiphase Init. This way full control is left to coreboot.
Port of commit 0e905801f8ff ("soc/intel: transition full control over PM
Timer from FSP to coreboot").
NOTE: This will have a huge power impact when it's enabled. If TCO timer
is disabled, uCode ACPI timer emulation must be enabled, and WDAT table
must not be exposed to the OS.
BUG=none
TEST=Boot to OS on google/rex.
Excerpt from google/rex coreboot log:
[SPEW ] EnableTcoTimer = 1
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I2693f0390e6c9fa92fec366ab87589c3bcea9027
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch deselects `USE_PM_ACPI_TIMER` kconfig to ensure that
ACPI PM timer remains disabled.
The PM timer (by PMC IP) consumes more power and blocks S0ix so the
timer is emulated by ucode to save power and unblock S0ix.
TEST=Able to boot Google, Rex and ensure PMC MMIO register 0x18fc
BIT 1 is set.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I2a23b417ff7fb6328323380a7df46b4b397fc8eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69685
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
BUG=b:231291430
TEST=See STB Spill-to-DRAM enabled
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ib60b7fc2ba85c7a8025c9f8c6495e94049499f56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69707
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The coreboot build system automatically adds a `config` file to CBFS
that lists the exact Kconfig configuration that this image was built
with. This is useful to reproduce a build after the fact or to check
whether support for a specific feature is enabled in the image.
However, the file is currently generated using the `savedefconfig`
command to Kconfig, which generates the minimal .config file that is
needed to produce the required config in a coreboot build. This is fine
for reproduction, but bad when you want to check if a certain config was
enabled, since many configs get enabled by default or pulled in through
another config's `select` statement and thus don't show up in the
defconfig.
This patch tries to fix that second use case by instead including the
full .config instead. In order to save some space, we can remove all
comments (e.g. `# CONFIG_XXX is not set`) from the file, which still
makes it easy to test for a specific config (if it's in the file you can
extract the right value, if not you can assume it was set to `n`). We
can also LZMA compress it since this file is never read by firmware
itself and only intended for later re-extraction via cbfstool, which
always has LZMA support included.
On a sample Trogdor device the existing (uncompressed) `config` file
takes up 519 bytes in CBFS, whereas the new (compressed) file after this
patch will take up 1832 bytes -- still a small amount that should
hopefully not break the bank for anyone.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I5259ec6f932cdc5780b8843f46dd476da9d19728
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Set the logging message prefix to the device name instead of the
device path in order to make the output consistent with other
logging messages in this and other drivers.
Change-Id: Ib63b93d52aad220d17f1f4ee0d47a949933ec26d
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69718
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
device
Instead of creating a dummy I2C device in order to force Linux to
decrease the I2C bus speed, use the own 'bus_speed' field of RV3028
device config structure.
Linux should always set the bus speed to the speed of the slowest
device sitting on the bus. Hence the dummy device is not needed
here anymore.
BUG=none
TEST=See if the RV3028 RTC is visible and working (date/time can
be set/read) in Linux. At the time, a driver modification is needed
to add a match table for the "MCRY3028" ACPI HID. A proper kernel
patch is pending.
Change-Id: I6e269dc67d1fe2a6747fcf3bee224def7b553f08
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69544
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Add ACPI generation callback to the driver after obtaining the
ACPI HID "MCRY3028" for this device from Microcrystal AG (VID: "MCRY").
Also add I2C bus speed field to the device config structure, which
is a required ACPI entry.
BUG=none
TEST=Disassemble the SSDT table and see whether the device entry
"MC28" is generated correctly. Also check whether the RV3028 driver
in Linux (drivers/rtc/rtc-rv-3028.c) is bound correctly after adding
an ACPI match table to it containing the HID. A proper kernel patch
is pending.
Change-Id: I3b8cf5c8dc551439755992ff05b6693e91cc3f21
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
It is no longer necessary to explicitly add "Warning" in front of
BIOS_WARNING message.
Change-Id: I6e4341555a3b03a531bd94ba5e36cbcadda9c663
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69624
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Get rid of a lot of casts.
Change-Id: I93645ef5dd270905ce421e68e342aff4c331eae6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
Update acpigen_write_alib_dptc() to support extra 5 thermal profiles.
User can use these profiles for dynamic thermal table switching support.
BUG=b:232946420
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I9e6d5c0fc6f492340c935899920d9ee7c9396256
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68470
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Issue:
Device can't wake up using power key.
Root cause and solution:
EINT event mask register is used to mask EINT wakeup sources. All
wakeup sources are masked by default. So we add a driver here to unmask
all wakeup sources.
BUG=none
TEST=wake the device up by power key on MT8188 EVB.
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Change-Id: I94b20909b0b8d77f75c41bc745f892baded7a54b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69688
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
On Herobrine, we will determine if we have an NVMe device based on SKU
id. Basically, if bit 0 is 2 (or Z), then we know that we have an
NVMe device and thus will need to go through PCIe initialization.
Otherwise, we know that we are booting an eMMC device.
BUG=b:254281839
BRANCH=None
TEST=build firmware image and boot and make sure we can boot up Tested
on villager, which does not have NVMe and made sure that it boots
still. Check cbmem dump to make sure that device configuration
entry is still low since it's not initializing PCIe devices:
40:device configuration 730,203 (1,295)
Change-Id: I1fa0ad392ba6320fdbab54b3b5dc83ac28cd20ba
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69690
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement mainboard_needs_pcie_init() for herobrine in order to
determine if we need to initialize the pcie links. When the SKU id is
unknown or unprovisioned (for example at the beginning of the factory
flow), we should still initialize PCIe. Otherwise the devices with
NVMe will fail to boot.
BUG=b:254281839
BRANCH=None
TEST=emerge-herobrine coreboot
Change-Id: I8972424f0c5d082165c185ab52a638e8b134064c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add Meteor Lake MCH device ID 0x7d15.
TEST=Build and verify boot on MTL RVP
With patch, coreboot log:
`[DEBUG] MCH: device id 7d15 (rev 00) is Meteorlake P`
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: If46b01910239173cd74bf6eebc69a81291b6e15a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Modify the chromeos FMD file for nissa variants to redistribute the
buffer in SI_ME region obtained due to CSE size optimizations to SI_BIOS
region.
1. Modify SI_ALL region size to 3712K. SI_DESC remains at 4K and SI_ME
is 3708K.
2. Modify SI_BIOS region to 12672K. This results in an addition of 32K
buffer each to FW_MAIN_A/B regions.
BUG=b:228936671
BRANCH=firmware-nissa-15217.B
TEST=Verify CSE FW update with new FMD and ME RW blobs on craask.
Cq-Depend: chrome-internal:5094491
Change-Id: I5ead2f81850a2aa79e677c7f271db672e235750a
Signed-off-by: Krishna P Bhat D <krishna.p.bhat.d@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
+-----------+-------+-------+---------+-------------+----------+
| Setting | AC LL | DC LL | ICC MAX | TDC Current | TDC Time |
| |(mOhms)|(mOhms)| (A) | (A) | (msec) |
+-----------+-------+-------+---------+-------------+----------+
| IA | 2.8 | 2.8 | 80 | 43 | 28000 |
+-----------+-------+-------+---------+-------------+----------+
| GT | 3.2 | 3.2 | 40 | 23 | 28000 |
+-----------+-------+-------+---------+-------------+----------+
- IA TDC current from 20A to 43A.
- GT TDC current from 20A to 23A.
BUG=b:256754175
TEST=Build test image and use PTAT to check IA and GT value
Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com>
Change-Id: Ife36655f077bae567bff3c3e33f779c990cf5ed9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69135
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Yang <paul.f.yang@intel.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
No boards now have a missing dependency so remove the workaround.
Change-Id: I787f6aa588175ba620a068918c42edc9d257c3ef
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69514
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Calling setup_ioapic() was only correct for the
IOAPIC routing GSI 0..15 that mimic legacy PIC IRQs.
Change-Id: Ifdacc61b72f461ec6bea334fa06651c09a9695d6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
_PRS only makes sense if _SRS is implemented.
Change-Id: I030bd716215b5ac5738e00ebf6ed991d9d6c5ca0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69513
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Simply return the current resource settings in the _PRS method. This
means that coreboot has to correctly set up the resources on the
device. This won't result in any regression as without _PRS the ACPI
OS would not know what resources settings are valid, so it would never
use _SRS.
Change-Id: I2726714cbe076fc7c772c06883d8551400ff2baa
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64218
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Read FRU product info of PSU to get Type 39 required information.
Further development needed if multi-record info of PSU FRU is required.
For now, the read_fru_areas() only read product chassis and board info.
Signed-off-by: lichenchen.carl <lichenchen.carl@bytedance.com>
Signed-off-by: ziang <ziang.wang@intel.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Change-Id: I18d056cba1a79b0775c8a42b3a879e819887adca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuming Chu (Shuming) <s1218944@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
This patch adds unique device-locators, bank-locators and
asset-tags to the smbios type17 tables by making use of a
DIMMs controller-ID. This way we avoid name clashes when,
for example, two DIMMs share the same channel-ID and DIMM-ID
but have a distinct controller-ID.
Signed-off-by: David Milosevic <David.Milosevic@9elements.com>
Change-Id: I8aef79faa43f2475485f581c675ee152e580f678
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The dimm_info structure (defined in src/include/memory_info.h)
currently does not hold information about the DIMM's
node/controller ID.
This patch extends the dimm_info structure by adding a new field for
the node ID, called node_num. Also, adapt the dimm_info_fill()
function accordingly to populate the newly-added field.
Background: These changes are necessary for the Atlas mainboard, where
we are currently experiencing issues with the DIMMs device/bank
locator. Our 2 DIMMs share the same CHANNEL and DIMM ID but have a
distinct NODE ID. By looking at the smbios table we see
Channel-0-DIMM-0 for both DIMMs. Thus, we need their NODE IDs in order
to distinguish them.
This patch was tested by building and booting for the Alderlake-P
RVP board, which has the same DIMM slot configuration as the
Prodrive Atlas mainboard.
Signed-off-by: David Milosevic <David.Milosevic@9elements.com>
Change-Id: I6ffa5bdff0ba0e3c4a4a51f2419291fd1278cd68
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68525
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update touchscreen setting.
Change hid as panel team request to fix touchscreen with no function.
The panel team verification result is on b/251378772 comment#17.
BUG=b:251378772
TEST=Build/boot ChromeOS on winterhold, ensure touchscreen is
functional.
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I07d446111b1c18bfe15d00b6eacff23382cd461a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I0897acddd00bad89a5fd784f82380ed0d0d2c06e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69703
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I58ff31ab98c4310478cf3bbe8aecce4000ac8205
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69717
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Make use of deterministic cache helper functions from Meteor Lake
SoC code to print useful information during boot as below:
Cache: Level 3: Associativity = 12 Partitions = 1 Line Size = 64
Sets = 32768
Cache size = 24 MiB
Port of commit 55f5410fcd78 ("soc/intel/alderlake: Implement report_cache_info() function")
BUG=none
TEST=Build and Boot verified on google/rex
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I561658c8da0136d6c3d9578f22f5d320e542457d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69681
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Change-Id: Ife134ef6d508113e3cd27b6352ee5044aee43744
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I4baa2e06d336736caf5505a05ed4353bcbfdb517
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
None of the touchscreens (over I2C) used in the rex program requires
exporting GPIOs in the ACPI _CRS method.
This can cause i2c devices to malfunction or cause timing
sequence violations if ACPI exports a PowerResource for the
device that uses GPIOs that are also exported in _CRS.
BUG=none
TEST=Able to build and boot Google, Rex platform.
Without this patch:
[ERROR] I2C: 00:10: Exposing GPIOs in Power Resource and _CRS
With this patch:
None
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I578a60eff27f94d6dc94b900604bc7560337d60b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69612
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tune timing between power on and reset on SD device RTD3.
BUG=b:250746988
TEST=Use the value to boot on Pujjo successfully.
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I1ea77ec8381000249229653f1c0b9044bdf7866d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
It is no longer necessary to explicitly add "CRIT: " in front of
BIOS_CRIT message.
Change-Id: I506c1d278960c91d1283e9b1936c9c1678a10e17
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
It is no longer necessary to explicitly add "ERROR: " in front of
BIOS_ERR message.
Change-Id: I36e2785ae567d82339212140c1bde0876dfd450d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I43e6b57477cb4fd2c8ab399e9cc74591b0a44684
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: Id50ebecdaddcce426b15d535afcc3e755f2c5a35
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I713b3fed3fc6d55139badec93a67943dd93ced2a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69333
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
