Age | Commit message (Collapse) | Author |
|
Low-level GPIOs should not depend on late cros_gpios that
should be guarded with CHROMEOS and implemented for the
purpose of ACPI \OIPG package generation.
Change-Id: Ibe708330504bc819e312eddaf5dfe4016cda21a1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59004
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ia473596e3c9a75587cd1288c8816bfef66bef82e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59000
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The APs don't execute this codepath but ap_romstage_main().
Change-Id: If884001bc8c5363efbbf00422a9a700896318f7b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Enable SaGv.
BUG=b:198235324
TEST=Boot into without issues.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I3cbff8d28bb5b5bfdad323f348b9f880245d049d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59095
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
https://tech-docs.system76.com/models/gaze16/README.html
The gaze16 comes in 3 variants due to differences in the discrete GPU
and network controller used.
- NVIDIA RTX 3050, using Realtek Ethernet controller
- NVIDIA RTX 3060, using Realtek Ethernet controller
- NVIDIA RTX 3060, using onboard Intel I219-V Ethernet controller
Tested on the 3050 variant.
Tested with TianoCore (UefiPayloadPkg).
Working:
- PS/2 keyboard, touchpad
- Both DIMM slots
- M.2 NVMe SSD
- M.2 SATA SSD
- 2.5" SSD
- All USB ports
- SD card reader
- Webcam
- Ethernet
- WiFi/Bluetooth
- Integrated graphics using Intel GOP driver
- HDMI output
- Internal microphone
- Internal speakers
- Combined headphone + mic 3.5mm audio*
- 3.5mm microphone input*
- S3 suspend/resume
- Booting to Pop!_OS Linux 21.04 and Windows 10 20H2
- Flashing with flashrom
Not working:
- Discrete/Hybrid graphics
- Mini DisplayPort output (requires NVIDIA GPU)
- 3.5mm audio input/output detection on Windows
Change-Id: Ifb90f9b73a10abf53a21738e2c466d539df9a37c
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Disable unused USB2 and USB3 port
BUG=b:192370253
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ia2fa10fb21e0a42e51728bc3d78163ca213f8d91
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Use the functionally-equivalent common Azalia code to get rid of
redundant code.
Change-Id: Id25d2797a91b05264b1a76fa8faec0533dd5ac78
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59120
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The `dev` parameter of the `azalia_codecs_init()` function is not used.
Remove it, and update all call sites accordingly.
Change-Id: Idbe4a6ee5e81d5a7fd451fb83e0fe91bd0c09f0e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59119
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the functionally-equivalent common Azalia code to get rid of
redundant code.
Change-Id: I83cf1a3a1a3854c9283ccac5e254357a32638dda
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59118
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make the `codec_init()` function non-static so that it can be used in
other places. Rename it to `azalia_codec_init()` for consistency with
the other functions of the API.
Also, update the function's signature to make it more flexible. Remove
the unused `dev` parameter and allow callers to pass the verb table to
use. Update the original call site to preserve behavior.
Change-Id: I5343796242065b5fedc78cd95bcf010c9e2623dd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59117
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the `azalia_program_verb_table()` function in preparation to
deduplicate Azalia init code.
Change-Id: I22cfee41e001c9ecf4fbac37aadbd12f43ac8aaf
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59116
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Handle the return value of `azalia_program_verb_table()` and print
different messages accordingly.
Change-Id: I99e9e1416217c5e67c529944736affb31f9c7d2f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59115
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the functionally-equivalent common Azalia code to get rid of
redundant code.
Change-Id: I982c1725d5affe95a20aa6713a246cd6b1ad270c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59114
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the functionally-equivalent common Azalia code to get rid of
redundant code.
Change-Id: Ib3b40e5788c6315cad02b670346997c9179e5fab
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use the functionally-equivalent common Azalia code to get rid of
redundant code.
Change-Id: Idc8d272d76a031c6835baf952eca03fc2e306525
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use the functionally-equivalent common Azalia code to get rid of
redundant code.
Change-Id: I53d993ff74e7952c34fbe94d49d3ebf2489dd414
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use the functionally-equivalent common Azalia code to get rid of
redundant code.
Change-Id: Icc435dd0c7cef1b458c877b5a64e6dba1d10524c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
These southbridges support four external codecs, not three.
Change-Id: I3f352451d16dceefa0f3fabf413a0e57aa498df5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Make the `codecs_init()` function non-static so that it can be used in
other places. Rename it to `azalia_codecs_init()` to avoid name clashes
with static definitions in southbridge code (which will be removed in
subsequent commits).
Change-Id: I080a73102b0c4f9f8a283cd93bba9b3b23169be0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: If725a369e7a12fbddd7b108e557d34a13bc78c09
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
For consistency with other Intel southbridges, program PC BEEP verbs.
None of the boards in the tree using this southbridge provide PC BEEP
verbs, so this change makes no difference.
Change-Id: I94d24999af819cf3951510586fd4864d1ed3f2f1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59106
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use the `azalia_program_verb_table()` function in preparation to
deduplicate Azalia init code.
With this change, the "Azalia: verb loaded." message is now printed when
programming the verbs failed. This will be addressed once `codec_init()`
has been deduplicated.
Change-Id: I5d9e0f19429620166f2a6ef48ec7c963ee64b59c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use gpio_keys driver to add ACPI node for pen eject event. Also
setting gpio wake pin for wake events.
BUG=b:192415743
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ia36119678cfd5c65a62685d3312537d9aa21e83b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Move SGX ACPI code to block/acpi. Also move the register definitions
there, since they are misplaced in intelblocks/msr.h and are used only
once anyways.
Change-Id: I089d0ee97c37df2be060b5996183201bfa9b49ca
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58925
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Currently all the power sequencing for FPMCU is done explicitly in
different stages of coreboot. This can all be done by adding ACPI power
resources for FPMCU and clean up the unused code. Here is the expected
power sequence:
PowerUp : Assert EN_PWR_FP -> 3 ms delay -> De-assert FPMCU_RST_ODL
Shutdown : De-assert EN_PWR_FP -> Assert FPMCU_RST_ODL
Reboot : Shutdown -> 200 ms delay -> PowerUp
BUG=None
TEST=Build and boot to OS in Guybrush. Ensure that the FP is able to
unlock the system after the first login attempt. Ensure that the FP is
able to wakeup the system. Observed that the power resource is added
correctly in the FPMCU ACPI object
Name (_PR0, Package (0x01) // _PR0: Power Resources for D0
{
PR01
})
Name (_PR3, Package (0x01) // _PR3: Power Resources for D3hot
{
PR01
})
PowerResource (PR01, 0x00, 0x0000)
{
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x01)
}
Method (_ON, 0, Serialized) // _ON_: Power On
{
\_SB.CTXS (0x0B)
\_SB.STXS (0x20)
\_SB.STXS (0x0B)
}
Method (_OFF, 0, Serialized) // _OFF: Power Off
{
\_SB.CTXS (0x0B)
\_SB.CTXS (0x20)
}
}
Change-Id: I52322eaecf6961ff9a196ca9ab2d58b7d4599d4f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Modify settings to enable CPU PCIE RP 1 according to schematics.
BUG=b:205504257
TEST=emerge-brya coreboot and can successfully boot with ssd and emmc.
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I0f817c860f2b295c6aa84fa1999d374d99f817f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59080
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
copy config from guybrush reference board.
BUG=b:204151079
BRANCH=guybrush
TEST=emerge-guybrush coreboot chromeos-bootimage
Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Ide9e002390e59725dc0e45f83280db2a78270993
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
- Set MAX OC1 to USB2_C1
BUG=b:205676803
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: Idcf13ad072ae5d7a897f54adb19e6b2b068609dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
Use size_t for count variables.
Reduce debug log level and fix typo.
Fix commit: https://review.coreboot.org/c/coreboot/+/58794
BUG=b:203145462
BRANCH=cherry
TEST=boot cherry correctly
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
Change-Id: Ic03f71b7a9038edb5877ebd9b6aed5e9bd63c918
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59038
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We need to put USB setting in mux order.
BUG=b:204230406
TEST=Type C mux configuration is correct.
Wrong:
added type-c port0 info to cbmem: usb2:2 usb3:2 sbu:0 data:0
added type-c port1 info to cbmem: usb2:3 usb3:3 sbu:0 data:0
Correct:
added type-c port0 info to cbmem: usb2:3 usb3:3 sbu:0 data:0
added type-c port1 info to cbmem: usb2:2 usb3:2 sbu:0 data:0
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I19338e162db6145dbeb5830de1a372cf98f779a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Divide dsm_param_file_name into dsm_param_R and dsm_param_L
BUG=b:205684021
TEST=build and check SSDT
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: Ie2db709a63152c1ccee2f7d594284e366ada8a01
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59046
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add wifi sar for galtic/galtic360/galith360
Using convertible mode of SKU ID to load wifi table.
Each Project and SKU ID correspond as below
galtic (sku id:0x120000)
galith (sku id:0x130000)
gallop (sku id:0x150000)
galtic360 (sku id:0x260000)
galith360 (sku id:0x270000)
BUG=b:203741126
TEST=emerge-dedede coreboot chromeos-bootimage \
coreboot-private-files-baseboard-dedede
verify the SAR table is correct in each project
Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: If4203d176dd717fa62c88d9b4fab8a53847213fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Use the official spelling. [1]
[1]: https://ark.intel.com/content/www/us/en/ark/products/codename/189143/products-formerly-cooper-lake.html
Change-Id: I7dbd332600caa7c04fc4f6bac53880e832e97bda
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59036
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I75c2e86e64943eb241db48482746317ed9ba47af
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ib360a6fa00d0ebda4635b96f1b671a66c1ca11c1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I4052baca2d8041b2a6d6fd410fcf99248662d7a5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58998
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ic8b189dd82c412aa439694e200d530ae7e71d7e2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
List of changes:
1. Create Module Type macros as per Memory Type
(i.e. DDR2/DDR3/DDR4/DDR5/LPDDR4/LPDDR5) and fix compilation
issue due to renaming of existing macros due to scoping the Memory
Type.
2. Use dedicated Memory Type and Module type for `Form Factor`
and `TypeDetail` conversion using `get_spd_info()` function.
3. Create a new API (convert_form_factor_to_module_type()) for
`Form Factor` to 'Module type' conversion as per `Memory Type`.
4. Add new argument as `Memory Type` to
smbios_form_factor_to_spd_mod_type() so that it can internally
call convert_form_factor_to_module_type() for `Module Type`
conversion.
5. Update `test_smbios_form_factor_to_spd_mod_type()` to
accommodate different memory types.
6. Skip fixed module type to form factor conversion using DDR2 SPD4
specification (inside dimm_info_fill()).
Refer to datasheet SPD4.1.2.M-1 for LPDDRx and SPD4.1.2.L-3 for DDRx.
BUG=b:194659789
TEST=Refer to dmidecode -t 17 output as below:
Without this code change:
Handle 0x0012, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: Not Provided
Total Width: 16 bits
Data Width: 16 bits
Size: 2048 MB
Form Factor: Unknown
....
With this code change:
Handle 0x0012, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: Not Provided
Total Width: 16 bits
Data Width: 16 bits
Size: 2048 MB
Form Factor: Row Of Chips
....
Change-Id: Ia337ac8f50b61ae78d86a07c7a86aa9c248bad50
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
It's commented in <types.h> that it shall provide <commonlib/helpers.h>.
Fix for ARRAY_SIZE() in bulk, followup works will reduce the number
of other includes these files have.
Change-Id: I2572aaa2cf4254f0dea6698cba627de12725200f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
MAINBOARD_HAS_CHROMEOS always evaluates true for this board.
The commentary about get_write_protect_state() was wrong, it's
currently only called in ramstage.
Change-Id: I0d5f1520a180ae6762c07dca7284894d9cf661b4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Enable DPTF based thermal control functionality for tpch device
on brya device.
BUG=b:198582766
BRANCH=None
TEST=Build FW and test on brya0 board
Change-Id: I6a35a101599bb811fcddaabab5296f8c6c12af31
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Since the if block contains multiple statements, it uses curly braces
around them, so also add curly braces around the else block even though
it only contains one statement.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia8d6b45ec16916ff77078446414de259cffa1475
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59070
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We are currently counting how long it takes to print the waiting
message, in addition to the actual time we spent waiting. This results
in inflating the measurement by 1.7ms when the serial console is
enabled. This CL makes it so the print happens before the stopwatch
starts.
BUG=b:179699789
TEST=No longer see printk time taken into account on serial console
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib48e37c1b2cb462d634141bf767673936aa2dd26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58960
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Currently, the MMCONF Kconfigs only support the Enhanced Configuration
Access mechanism (ECAM) method for accessing the PCI config address
space. Some platforms have a different way of mapping the PCI config
space to memory. This patch renames the following configs to
make it clear that these configs are ECAM-specific:
- NO_MMCONF_SUPPORT --> NO_ECAM_MMCONF_SUPPORT
- MMCONF_SUPPORT --> ECAM_MMCONF_SUPPORT
- MMCONF_BASE_ADDRESS --> ECAM_MMCONF_BASE_ADDRESS
- MMCONF_BUS_NUMBER --> ECAM_MMCONF_BUS_NUMBER
- MMCONF_LENGTH --> ECAM_MMCONF_LENGTH
Please refer to CB:57861 "Proposed coreboot Changes" for more
details.
BUG=b:181098581
BRANCH=None
TEST=./util/abuild/abuild -p none -t GOOGLE_KOHAKU -x -a -c max
Make sure Jenkins verifies that builds on other boards
Change-Id: I1e196a1ed52d131a71f00cba1d93a23e54aca3e2
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Use bitwise or instead of additions to build bit masks with multiple
bits set.
TEST=Timeless build results in identical image on amd/mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I42cc6686d8fa3f694a46ba4ca801a822ef1db1d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
In both the Picasso PPR (rev 3.16) and the Cezanne PPR (rev 3.03) bit 16
of the misc I2C pad control registers is defined as BiasCrtEn, so rename
I2C_PAD_CTRL_BIOS_CRT_EN to I2C_PAD_CTRL_BIAS_CRT_EN.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If39ac17a433cb90c944fdde038cd246a995e193a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59028
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set RFI Spread Spectrum to 6% for Redrix as RF team request.
The default of Spread Spectrum in FSP is 1.5%, and set 1.5% in baseboard
as default.
BUG=b:200886627
TEST=build
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: Id0b42446e9e46ef629b5ca8d5d29faf2d771348d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add RFI UPD settings to mitigate RFI noise issues and exporting
these UPDs to override via board devicetree.
BUG=b:200886627
TEST=build
Change-Id: I37bfef295fcd886d4f01abd40f9467a0791e9e34
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
During CSE firmware updates, the CSE RW firmware from ME_RW_A/B is
copied to CSE_RW, so the sizes of these regions need to match.
BUG=b:189177538
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I94e0615088349af34020fb8a126fce9e72df9ee2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59006
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
For the Qualcomm PBL configuration of GPIO, we need to initial the
GPIOs for VDD33# and RST# at the beginning of coreboot. According to
the pa8640 latest spec v1.4, update the sequence of VDD33# and PD#.
BUG=b:204637643
BRANCH=trogdor
TEST=verified the waveform of ps8640 at coreboot phase.
Signed-off-by: xuxinxiong <xuxinxiong@huaqin.corp-partner.google.com>
Change-Id: Ia378aafa49ec462c990501ce48721e330d9648b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58994
Reviewed-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Probe the fw_config for RT1015 speaker amplifier operation mode and
enable it accordingly in the device tree.
BUG=none
BRANCH=dedede
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I2de1487b7f4767e9ba6432174c39feeb25f9534c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This change adjusts all I2C speed to lower then 400KHz. The rise_time_ns
and fall_time_ns values for each port are capured by a scope.
BUG=None
BRANCH=dedede
TEST=built and verified adjusted I2C speed < 400KHz
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: I9504608dd8d9a5f5a3848ef34691557942c21023
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58965
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add ELAN touchscreen support for magneto.
BUG=b:203122673
TEST=Build and verify that touchscreen works.
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: Ie86692901113e952c597fcfc6c58e7ee0fc172fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Update charger performance control table of DPTF for bugzzy.
Since the EC change chromium:197776876 modified maximum charging current
to reduce skin temperature, this change adjusts the charging performance
table with the modified value.
BUG=b:197776876
BRANCH=dedede
TEST=emerge-dedede coreboot
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: I33e176fcf5d380b315ff352c6c65af3b8b93c4b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
BUG=None
BRANCH=dedede
TEST=enable CHROMEOS_WIFI_SAR in config of coreboot,
emerge-dedede coreboot chromeos-bootimage
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: Ie967ef7fbc19886c631e634a0b0c3f2cf1e490af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
GNVS should not be used for values that are static at runtime. Thus,
use SSDT for the SGX fields.
Change-Id: Icf9f035e0c2b8617eef82fb043293bcb913e3012
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This drops VBOOT_NO_BOARD_SUPPORT.
There is little impact of always having recovery_mode_switch()
implemented in bootmode.c. A weak write_protect_state() is not
necessary as there is no BOOT_DEVICE_SPI_FLASH with the emulation.
Call to fill_lb_gpios() is already guarded with CONFIG(CHROMEOS)
so the weak implementation would not be referenced.
Change-Id: I3c00b30c5233ae3556b7622f97c3166668c8ab12
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=b:140165023
Change-Id: I1908f727a7be1e33cbfd273b7261cbd989a414fe
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
When MMIO functions are available, the pci_s_* functions do exactly
the same thing. Drop the redundant pci_mmio_* versions.
Change-Id: I1043cbb9a1823ef94bcbb42169cb7edf282f560b
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
To ease code sharing with other MMIO-based configuration mechanisms,
move everything MMCONF (more specifically ECAM) related to one spot
and guard it.
Change-Id: Idda2320c331499dabbee7447f1ad3e81340f2a25
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
There is no platform in our tree that requires the PCI MMIO ops but
doesn't want the pci_s_* definitions. The only case where we include
the `pci_mmio_cfg.h` header but don't want the pci_s_* functions to
use MMIO is on older x86 platforms, so move the guard there.
Change-Id: Iaeed6ab43ad61b7c0e14572b12bf4ec06b6a26af
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Ibbdd589119bbccd3516737c8ee9f90c4bef17c1e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Avoid indirect <vc/google/chromeos/chromeos.h> as the
files really only need <security/vboot/vboot_common.h>.
Change-Id: Ic02bd5dcdde0bb5c8be0e2c52c20048ed0d4ad94
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Technically, it's not depending on the hardware but on the software
(OS/payload), if the PM Timer is optional. OSes with ACPI >= 5.0A
support disabling of the PM Timer, when the respective FADT flag is
unset. Thus, drop this guard.
For platforms without hardware PM Timer (Apollo Lake, Gemini Lake) the
Kconfig `USE_PM_ACPI_TIMER` depends on `!NO_PM_ACPI_TIMER`.
As of this change, new platforms must either implement code for
disabling the hardware PM timer or select `NO_PM_ACPI_TIMER` if no such
is present.
Change-Id: I973ad418ba43cbd80b023abf94d3548edc53a561
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lance Zhao
|
|
In the non-XIP world, FSP is normally memmapped and then decompressed.
The AMD SPI DMA controller can actually read faster than mmap. So by
reading the contents into a buffer and then decompressing we reduce boot
time.
BUG=b:179699789
TEST=Boot guybrush and see 30ms reduction in boot time
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I28d7530ae9e50f743e3d6c86a5a29b1fa85cacb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58987
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This option will allow setting the FSP alignment in CBFS.
BUG=b:179699789
TEST=Boot with and without the option set and verify -a option was
passed.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4533f6c9d56bea6520aa3aa87dd49f2144a23850
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
We no longer need to do this since we relocate at runtime.
BUG=b:179699789
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ibef849d5b3f0290cb7b7c5ff18aabe002bf53344
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
AMD platforms pass in the base address to cbfs tool:
fspm.bin-options: -b $(CONFIG_FSP_M_ADDR)
There is no technical reason not to allow FSP-M to be relocated when
!XIP. By allowing this, we no longer need to pass in the base address
into cbfstool when adding fspm.bin. This enables passing in the
`--alignment` argument to cbfs tool instead. cbfstool currently has a
check that prevents both `-b` and `-a` from being passed in.
BUG=b:179699789
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I797fb319333c53ad0bbf7340924f7d07dfc7de30
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
thread_mutex uses bool.
BUG=b:179699789
TEST=Build guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Id26b37d3e38852d72fcb6ff07ed578b0879e55dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58990
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The follow up CLs will use CBFS_PRELOAD. The default CBFS_CACHE_SIZE was
derived by examining the `cbfstool print` output and summing the files
we intend to preload.
BUG=b:179699789
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I208067e6ceec6ffb602a87bee3bf99a0a75c822d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ida8d767a5b56bdf59747362ddf68372436573895
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58972
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Read fw_config value from VPD.
This new option can be used where chrome EC is not supported like
pre-silicon platform and fw_config can be updated by VPD tool in OS.
TEST= boot to OS and read fw_config from vpd
1. Boot to OS
2. Write "fw_config" in VPD
ex) vpd -i "RW_VPD" -s "fw_config"="1"
3. reboot and check fw_config value from coreboot log
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I4df7d5612e18957416a40ab854fa63c8b11b4216
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58839
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Request fw_config values from various sources (as enabled via Kconfig)
until a valid value has been read.
With this change, Chrome EC CBI takes precedence over CBFS fw_config.
TEST=select both configs and check fallback behavior.
1. select both FW_CONFIG_SOURCE_CHROMEEC_CBI and FW_CONFIG_SOURCE_CBFS
2. check log for reading fw_config from CBI and CBFS
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I215c13a4fcb9dc3b94f73c770e704d4e353e9cff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
elog init requires doing a lot of SPI transactions. This change makes it
clear how long we spend initializing elog.
BUG=b:179699789
TEST=Boot guybrush and see elog init timestamps
114:started elog init 3,029,116 (88)
115:finished elog init 3,071,281 (42,165)
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia92372dd76535e06eb3b8a08b53e80ddb38b7a8f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58957
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This gives us a knob that can be controlled via a .config to
enable/disable file preloading. I left the option disabled because
there is currently a race condition that can cause data corruption when
using the SPI DMA controller. The fix will actually introduce a
boot time regression because the preloads are happening at the same time
as the elog init. I want to keep preloading disabled for now until
I get all the sequencing worked out.
BUG=b:179699789
TEST=Boot guybrush and verify no preloading happens.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ie839e54fa38b81a5d18715f190c0c92467bd9371
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Add SPI controller drivers.
TEST=build pass
BUG=b:202871018
Signed-off-by: Ruwen Liu <ot_ruwen.liu@mediatek.com>
Change-Id: I59a885c4fa31b6e2921698eaa3b97dbdc3144946
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
SPI speed override is not related to ChromeOS, thus the
location in chromeos.c was poor choice.
Change-Id: Ie3db89f252af1f44e9539497c05bdf965565a191
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Since all other defines for the number of certain things are at the top
of the file, move NUMBER_SMITYPES there as well to keep things
consistent.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idfb599531d6cc382ab258bd1eae89e7b35fa9e79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
SCIMAPS is the total number of SCI to GEVENT mappings. configure_scimap
returns early when the scimap is greater or equal than SCIMAPS, so for
SMITYPE_ACDC_TIMER it returned early without doing what was expected
from it to do despite that being a valid value, so fix this off-by-one.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibaf8c5618ddbf0b8d4cd612a7f1347d8562bbfcb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I9e7200d60db4333551e34a615433fa21c3135db6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Return 0 instead of -1 in case of error. Both values indicate an error
has happened. Adapt `cpu_bus_scan()` accordingly.
Change-Id: I0f83fdc41c20ed3aae80829432fc84024f5b9b47
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Id95e45a3eba384a61c02016b7663ec71c3ae1865
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58917
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
EINT event mask register is used to mask EINT wakeup source.
All wakeup sources are masked by default. Since most MediaTek SoCs do
not have this design, we can't modify the kernel EINT upstream driver to
solve the issue 'Can't wake using power button (cros_ec) or touchpad'.
So we add a driver here to unmask all wakeup sources.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I84946c2c74dd233419cb94f013a42c734363baf7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add timer drivers to use timer function.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I6524e4dec4cbe7f7eb75a7940c329416559a03c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58937
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add PLL and clock init code, frequency meter and APIs for
raising little CPU/CCI frequency.
TEST=build pass
BUG=b:202871018
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Change-Id: Id46d0708e7ba0c1a4043a5dce33ef69421cb59c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: I882c567e6bca0982a0d3d44c742777c4d7bd5439
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add NOR-Flash drivers to pass verification of flash at verstage.
TEST=boot to romstage
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Iee3dd336632b0cf998f5f7c1d118e01e8270e815
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The NOR-Flash can be configured on SPI0 or TDM-RX GPIOs so we have to
provide an init function in SoC for the mainboard to select right
configuration.
TEST=boot to romstage
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I285ec64ace8b72a48ef1d481d366bd67cb9b0337
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This patch sets the enable the external voltage rails since taeko
board have V1p05 and Vnn bypass rails.
BRANCH=None
BUG=b:204832954
TEST=FW_NAME=Check in FSP log and run PLT test
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I20ff310d48d3e7073fe5e94d03d29cc55a46d1f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58943
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Type C port2 uses EC mux port0 as per schematics.
BUG=b:204230406
TEST=No error message in depthahrge.
update_port_state: port C2: get_usb_pd_mux_info failed
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I85218c81018b248c41a2cdaf9360a86e2a7d4d7a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Rewrite level type check and use unsigned types. In addition, also use
unsigned types in the `get_cpu_count()` function.
Change-Id: I63f236f0f94f9412ec03ae25781befe619cf7c1f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Reduce the visibility of the `get_threads_per_package()` function and
retype its return value to `unsigned int`.
Change-Id: Ie71730d9a89eb7c4bb82d09d140fbcec7a6fe5f3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Iff6da3dc9c744a3dae3f4dd4ac37a91f348450a3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I9ab0106c27a834d5d2ac1cb8023f4400a8ad91cd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58916
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This can now be controlled with the `MMCONF_BUS_NUMBER` Kconfig option.
Change-Id: If0fdefc5b4339acc843443c551892b397ed39c2e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The `find_resource` function will never return null (will die instead).
In cases where the existing code already accounts for null pointers, it
is better to use `probe_resource` instead, which returns a null pointer
instead of dying.
Change-Id: I329efcb42a444b097794fde4f40acf5ececaea8c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lance Zhao
|
|
The `find_resource` function will never return null (will die instead).
In cases where the existing code already accounts for null pointers, it
is better to use `probe_resource` instead, which returns a null pointer
instead of dying.
Change-Id: Ic6e28add78f686fc9ab4556eddbedf7828fba9ef
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58909
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The `find_resource` function will never return null (will die instead).
In cases where the existing code already accounts for null pointers, it
is better to use `probe_resource` instead, which returns a null pointer
instead of dying.
Change-Id: Ia9a4b62c857f7362d67aee4f9de3bb2da1838394
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The `find_resource` function will never return null (will die instead).
In cases where the existing code already accounts for null pointers, it
is better to use `probe_resource` instead, which returns a null pointer
instead of dying.
Change-Id: I2a57ea1c2f5b156afd0724829e5b1880246f351f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The `find_resource` function will never return null (will die instead).
In cases where the existing code already accounts for null pointers, it
is better to use `probe_resource` instead, which returns a null pointer
instead of dying.
Change-Id: I617fea8a09049e9a87130640835ea6c3e2faec60
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|