summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-11-09soc/intel/jasperlake: Update reserved GPIO names in gpio_soc_defs.hMaulik V Vaghela
Multiple GPIOs were defined as a reserved GPIO in JasperLake. Correcting this GPIOs with proper name to align with EDS volume 2 Also removing unused GPIOs at the end of community 4 (group E). Since those reserved GPIOs are at the end of the community, it won't affect the offset calculations within community. This change will also help us aligning pad numbering with kernel pin-ctrl drivers too. Reference: DOC#618876 (EDS volume 2) BUG=None BRANCH=None TEST=Platform boots fine and basic functionality such as SD, Wifi works. Change-Id: I8326b7181d47a177261656f51602638d8ce80fbb Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47232 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09mb/google/volteer/eldrid: Describe the privacy_gpioRicardo Ribalda
Add information regarding the privacy pin on the overridetree and the gpio. BUG=b:171888751 Change-Id: I1ab19a863715ba5a928dd7c16402d398e5475edc Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46964 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09mb/google/hatch/jinlon: Describe the privacy_gpioRicardo Ribalda
Add information regarding the privacy pin on the overridetree and gpio. BUG=b:169840271 Change-Id: Ifa628dda03f3f65976850aeabaf516f528a921b7 Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09drivers/usb/acpi: Add support for privacy_gpioRicardo Ribalda
Some devices, such as cameras, can implement a physical switch to disable the input on demand. Think of it like the typical privacy sticker on the notebooks, but more elegant. In order to notify the system about the status this feature, a GPIO is typically used. The map between a GPIO and the feature is done via ACPI, the same way as the reset_gpio works. This patch implements an extra field for the described privacy gpio. This gpio does not require any extra handling from the power management. BUG=b:169840271 Change-Id: Idcc65c9a13eca6f076ac3c68aaa1bed3c481df3d Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09mb/google/dedede/variants/magolor: Update Power Limit2 minimum valueSumeet R Pawnikar
Update Power Limit2 (PL2) minimum value to the same as maximum value for magolor board. DTT does not throttle PL2, so this minimum value change here does not impact any existing behavior on the system. BUG=b:168353037 BRANCH=None TEST=Build and test on magolor board Change-Id: I74e960de506d366cba2c8aefb23f9e69337fd163 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-09soc/intel/jasperlake: Add PCH PCIe RPs wake up events to event logTim Wawrzynczak
All wakes by a PCH PCIe root port were lumped under one event source; this commit splits them up so each root port gets its own ID in the event log. BUG=b:172279061 BRANCH=volteer Change-Id: Icdb10043700c20ddb6ae93747a731005fd233a70 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-09soc/intel/tigerlake: Add PCH PCIe RPs wake up events to event logTim Wawrzynczak
All wakes by a PCH PCIe root port were lumped under one event source; this commit splits them up so each root port gets its own ID in the event log. BUG=b:172279061 BRANCH=volteer Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Icebcac3b69c605ecf6df37733b641397ea3c3ad0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-09device: Move pci_dev_is_wake_source functionTim Wawrzynczak
Move this function to pci_ops.c, which is already included in the smm build. This is required to use this function in elog functionality, which is called from SMM. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ie5583c04366c9a16bc1b00a6892d39eeafe5da49 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47260 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-09mb/google/dedede/var/boten: Add LTE power on/off sequenceKarthikeyan Ramasubramanian
LTE module used in boten has a specific power on/off sequence. GPIOs related to power sequnce are: * GPP_A10 - LTE_PWR_OFF_R_ODL * GPP_H17 - LTE_RESET_R_ODL 1. Power on: GPP_A10 -> 20ms -> GPP_H17 2. Power off: GPP_H17 -> 10ms -> GPP_A10 3. Warm reset: Power off -> 500ms -> Power on Configure the GPIOs based on these requirements. BUG=b:163100335 TEST=Build and boot Boten to OS. Ensure that the LTE module power sequence requirements are met. Change-Id: Ic6d5d21ce5267f147b332a4c9b01a29b3b8ccfb8 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09mb/google/dedede: Add support for variant specific SMI sleep flowKarthikeyan Ramasubramanian
This support is required to power off certain components that exist only in certain variants. BUG=None TEST=Build and boot Boten to OS. Change-Id: Ib43ada784666919a4d26246a683dad7f3546fabb Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09driver/usb/acpi: Add power resources for devices on USB portsKarthikeyan Ramasubramanian
Allow a USB device to define PowerResource in its SSDT AML code. PowerResouce ACPI generation expects SoC to define the callbacks for generating AML code for GPIO manipulation. Device requiring PowerResource needs to define following parameters: * Reset GPIO - Optional, GPIO to put device into reset or take it out of reset. * Reset delay - Delay after reset GPIO is asserted (default 0). * Reset off delay - Delay after reset GPIO is de-asserted (default 0). * Enable GPIO - Optional, GPIO to enable device. * Enable delay - Delay after enable GPIO is asserted (default 0). * Enable off delay - Delay after enable GPIO is de-asserted (default 0). BUG=b:163100335 TEST=Ensure that the Power Resource ACPI object is added under the concerned USB device. Change-Id: Icc1aebfb9e3e646a7f608f0cd391079fd30dd1c0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46713 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/common/acpi: create pep.asl from lpit.aslMichael Niewöhner
Copy lpit.asl to pep.asl to have a clean patch series without moving files and to be able to keep the replace-patch CB:46471 as small as possible to avoid confusion. Change-Id: Ib1c019039ef0c518cf678af6109ba914b7f47bb6 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09mb/google/volteer/var/voema: Add memory parts and generate DRAM IDsDavid Wu
This change adds memory parts used by variant voema to mem_parts_used.txt and generates DRAM IDs allocated to these parts. Added memory 1. MT53E512M64D4NW-046 WT:E 2. MT53E1G64D8NW-046 WT:E BUG=b:171755775 TEST=emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I24d466f92a7e0fa3ab2f6241f0b5af025c53ed98 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-11-09Atlas: Wake up AP on AC plug and unplugDaisuke Nojiri
This patch makes Atlas resume from S0ix by AC plug and unplug. BUG=b:165328935 BRANCH=atlas TEST=Put Atlas in suspend. Wake it up by AC plug. TEST=Put Atlas in suspend. Wake it up by AC unplug. Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: I95676d785bfc1488a8c1bdd3d56f2c38d95f3fb6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-11-09intel/common/pmc: Add functions for IPC mailbox in ACPIDuncan Laurie
This change adds two functions that provide an IPC mailbox method via ACPI for runtime clock configuration. pmc_acpi_fill_ssdt_ipc_write_method() will provide a method in the SSDT that can be called by other ACPI devices to send an IPC mailbox command. This function is exported because some SOCs override the default PMC device and need to call this function to write the method into the SSDT. pmc_acpi_set_pci_clock() will call the method defined by the previous function to enable or disable the PCIe SRCCLK for a specified root port and clock pin. It can be called by the PCIe root port after turning off power to the attached device. BUG=b:160996445 TEST=boot on volteer device and disassemble the SSDT to ensure that this method exists. Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I95f5a1ba2bc6905e0f8ce0e8b2342ad1287a23a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46259 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/tigerlake: Utilize vbt data size Kconfig optionSrinidhi N Kaushik
From Tigerlake FSP v3373 onwards vbt binary size changed from 8KiB to 9KiB. Commit cf5d58328fe004d967466be42de62d6bab4c3133 had changed the size from 8 to 9 Kib in drivers/gma. This change makes use of Kconfig option to pick the size for tigerlake. BUG=b:171401992 BRANCH=none TEST=build and boot delbin and verify fw screen is loaded Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I21a0bba9ae01bac326f0f931641c98e8d308310f Reviewed-on: https://review.coreboot.org/c/coreboot/+/47209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09drivers/intel/gma: Add Kconfig option for vbt data sizeSrinidhi N Kaushik
From Tigerlake FSP v3373 onwards vbt binary size changed from 8KiB to 9KiB. Commit cf5d58328fe004d967466be42de62d6bab4c3133 had changed the size from 8 to 9 Kib. This change adds Kconfig option to choose vbt data size based on platform. BUG=b:171401992 BRANCH=none TEST=build and boot delbin and verify fw screen is loaded Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ia294fc94ce759666fb664dfdb910ecd403e6a2e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47151 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09acpigen: Add more useful helper functionsDuncan Laurie
acpigen_write_debug_namestr() - Debug = NAME acpigen_write_return_namestr() - Return (NAME) acpigen_set_package_op_element_int() - Set package pointer element DeRefOf (PKG[ELEM]) = INT acpigen_get_package_element() - Get package (not pointer) element dest_op = PKG[ELEM] acpigen_set_package_element_int() - Set package element to integer PKG[ELEM] = INT acpigen_set_package_element_namestr() - Set package element to namestr PKG[ELEM] = NAME acpigen_write_delay_until_namestr_int() - Delay while waiting for register to equal expected value. BUG=b:160996445 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I9b20a23872b7d4a50f03761032426ffbb722b9ee Reviewed-on: https://review.coreboot.org/c/coreboot/+/47196 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09mb/google/dedede/var/drawcia: Remove camera EEPROM power resourceKarthikeyan Ramasubramanian
EEPROM in the camera module does not require any specific power resources. This will ensure that no unnecessary resources are turned on while accessing the camera EEPROM. BUG=b:167938257 TEST=Build and boot to OS in Drawlat. Ensure that the camera EEPROM is listed in the output of i2cdetect. Change-Id: Iece9b3f657bf94a21cc08bf1745353575858f9b2 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09mb/google/dedede: Enable Wake on AC connect and disconnectKarthikeyan Ramasubramanian
Handle AC connect and disconnect notifications from Embedded Controller (EC) and wake from S3/S0ix. BUG=b:172266344 TEST=Build and Boot to OS in Drawlat. Ensure that the system wakes up from suspend on AC connect and disconnect on both the TypeC ports. 276 | 2020-11-04 12:21:29 | S0ix Enter 277 | 2020-11-04 12:21:40 | S0ix Exit 278 | 2020-11-04 12:21:40 | EC Event | AC Disconnected 279 | 2020-11-04 12:21:57 | S0ix Enter 280 | 2020-11-04 12:22:03 | S0ix Exit 281 | 2020-11-04 12:22:03 | EC Event | AC Connected 282 | 2020-11-04 12:22:35 | S0ix Enter 283 | 2020-11-04 12:22:47 | S0ix Exit 284 | 2020-11-04 12:22:47 | EC Event | AC Disconnected 285 | 2020-11-04 12:23:08 | S0ix Enter 286 | 2020-11-04 12:23:16 | S0ix Exit 287 | 2020-11-04 12:23:16 | EC Event | AC Connected Change-Id: I7fa4ac0096548fd63af86e9f56c4c1ee25491399 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09ec/purism/librem/ec.asl: End commentBenjamin Doron
End comment that (likely mistakenly) removed an EC query method. Change-Id: Id192d665a22a8885d7cec56cd6b8ea207fb54402 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-09mb/google/dedede/variants: Update Power Limit2 minimum valueSumeet R Pawnikar
Update Power Limit2 (PL2) minimum value to the same as maximum value for dedede variants (baseboard and drawcia). Currently, variants like boten, waddledee, waddledoo, metaknight and wheelie uses the DTT entries from baseboard devicetree since there is no override present for these variants. So, these variants will also reflect this change of PL1 minimum value. For madoo variant, PL2 minimum value already set the same as PL2 maximum value. DTT does not throttle PL2, so this minimum value change here does not impact any existing behavior on the system. BUG=None BRANCH=None TEST=Build and test on drawcia system Change-Id: I7ecf1ffcc7871192ebe18eb8c3c3fd3e1193721e Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47154 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09mb/intel/jasperlake_rvp: Update Power Limit2 minimum valueSumeet R Pawnikar
Update Power Limit2 (PL2) minimum value to the same as maximum value for jasperlake rvp board. DTT does not throttle PL2, so this minimum value change here does not impact any existing behavior on the system. BUG=None BRANCH=None TEST=Build and test on jasperlake rvp board Change-Id: I862f7106846de5fb37f74419807eedc3096ded8a Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09nb/intel/pineview: Fix clearing memoryArthur Heymans
The regions TSEG, GSM, GMS should not be marked as cacheable resources. Change-Id: I083b096cf3ed250bca722674abe9feffdb2436d1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-09soc/intel/*/chip: Remove unused devicetree entryPatrick Rudolph
InternalGfx isn't used so drop it. Change-Id: I12f424d8d883e065ef8d007e56a8bff41a7fae53 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-09mb/google/volteer/var/voema: config CSE LITEDavid Wu
Config voema to use CSE LITE BUG=b:171755775 TEST=FW_NAME=voema emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ic4ca82ce844e6367da70ed052445943572ae7b09 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-09mb/google/variant/voema: Select USE_CAR_NEM_ENHANCED_V2 for voemaDavid Wu
BUG=b:171755775 TEST=FW_NAME=voema emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ibedbbe8f9ac039cbde114ace3266ec067a4003ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/47159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-09mb/google/volteer: Skip TPM detection except on SPIJes Klinke
Production Volteer devices have Cr50 TPM connected via SPI, depending on Cr50 firmware version it may or may not support long enough interrupt pulses for the SoC to safely be able to enable lowest power mode. Some reworked Volteer devices have had the Cr50 (Haven) TPM replaced with Dauntless, communicating via I2C. The I2C drivers do not support being accessed early in ramstage, before chip init and memory mapping, (tlcl_lib_init() will halt with an error finding the I2C controller base address.) Since the Dauntless device under development can be made to support longer interrupts, or a completely new interrupt signalling mode, there is no need to try to go through the same discovery as is done via SPI. This CL will skip the discovery, enabling the S0i3.4 sleep mode in all cases, on the reworked test devices. BUG=b:169526865, b:172509545 TEST=abuild -t GOOGLE_VOLTEER2 -c max -x Change-Id: I08a533cede30a3c0ab943938961dc7e4b572d4ce Signed-off-by: Jes Bodi Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47049 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09acpi: Call acpi_fill_ssdt() only for enabled devicesKarthikeyan Ramasubramanian
Individual drivers check whether the concerned device is enabled before filling in the SSDT. Move the check before calling acpi_fill_ssdt() and remove the check in the individual drivers. BUG=None TEST=util/abuild/abuild Change-Id: Ib042bec7e8c68b38fafa60a8e965d781bddcd1f0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2020-11-09mb/google/volteer/variants/volteer2: Tune I2C3 camera bus freq 400 kHzJohnny Li
The current I2C3 bus frequency is 341 kHZ, which does not meet the spec. This change updates scl_lcnt, scl_hcnt, sda_hold value for I2C3 to bring the bus frequency closer to 400kHz. BUG=b:153588771 TEST=Verified that I2C3 frequency is 394kHz. Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com> Change-Id: Ie1ef95bb39d71fbb113120a0ec88305bc23e7ab9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47225 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-11-09mb/google/puff/var/dooly: Set default I2C0 frequencyTony Huang
This setting copy from puff reference board and should measure again after whole system build. BUG=b:155261464 BRANCH=puff TEST=emerge-puff coreboot and check system speaker has sound output. Change-Id: Idd5c3276e9306e81ea766d14ed1415a68dedc2ad Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47161 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/xeon_sp/skx: Reorder soc_util.cMarc Jones
Reorder soc_util.c and remove the un-needed #if ENV_RAMSTAGE to match cpx version in preparation for more de-duplication. Change-Id: Iab343e903e2478709fe91739c9ca77f587286df7 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-08mb/intel/adlrvp: Refactor ADLRVP code to get rid of 'variants/baseboard'Subrata Banik
List of changes: 1. Use devicetree.cb from default location 2. Create variant directory for ADL RVP with external EC as 'adlrvp_p_ext_ec' 3. Add initial overridetree.cb for 'adlrvp_p' and 'adlrvp_p_ext_ec' to override 'devicetree.cb' as applicable. 4. Move all common files between 'adlrvp_p' and 'adlrvp_p_ext_ec' to mainboard directory TEST=Build and boot both ADLRVP with onboard and external EC. Change-Id: I3591e214ed32dc9baaa49b92dff59579f29c7bd6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47335 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-07soc/amd/common: Don't program GPIOs if the table isn't setMartin Roth
Currently, there's no check for the table being programmed. This skips programming a table if the table size is zero, or the pointer to the table has been set to NULL. BUG=None TEST=Set table pointer to NULL, table doesn't run. BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I7d09b47e7d619428b64cc0695f220fb64c71ef4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/47307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-07soc/amd/common/psp: expand CPU family names in Kconfig help textFelix Held
Expand fam17h to family 17h to make the help text slightly easier to understand and add family 19h to the description of SOC_AMD_COMMON_BLOCK_PSP_GEN2. Change-Id: I9284c9c638e1d217d4605523dde004781f4343f9 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-07mainboard/ocp/tiogapass: Add xeon_sp pch.aslMarc Jones
Use the xeon_sp pch.asl to include the intel common lpc.asl. Change-Id: I22ee9d325888808a9c775ecee0591b661e2bba4e Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Javier Galindo <javiergalindo@sysproconsulting.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-11-07mainboard/ocp/deltalake: Use xeon_sp pch.aslMarc Jones
Use the xeon_sp pch.asl to pickup the common block lpc.asl. This allows deltalake to pick up any general pch asl updates. Currently, generates the same asl. Change-Id: I5005032b030d288fdf5ca2f99d21fe8e6c752037 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47304 Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-07mainboard/ocp/tiogapass: Set longer BMC timeoutMarc Jones
The BMC isn't always ready in 60 seconds if it printing debug output. Give it 90 seconds to finish before timing out in coreboot. Change-Id: I3932d3e8fad067e8971e82b45b499801fc78079f Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Javier Galindo <javiergalindo@sysproconsulting.com>
2020-11-07sb/intel/lynxpoint/pcie.c: Ensure OBFF is disabledAngel Pons
Setting registers 64h[19:18] = 2 and 68h[14:13] = 3 enables OBFF, and setting registers 64h[19:18] = 0 and 68h[14:13] = 0 disables OBFF. Register at offset 0x64 is DCAP2, and offset 0x68 is DCTL2. However, current code doesn't account for this. The result is that register 64h[19:18] = 2 and 68h[14:13] = 0, which means the hardware is OBFF-capable but support is disabled, which makes no sense. Given that reference code and Broadwell both disable OBFF, disable it here too. Change-Id: I6c1cafdb435ee22909b077128b3ae5bde5543039 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47240 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-07sb/intel/lynxpoint/lpc.c: Relocate `enable_hpet` functionAngel Pons
Change-Id: I957556bcb3f2d793ed2d9a9c966b2081f9be090c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47042 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-07sb/intel/lynxpoint/lpc.c: Correct GPI routing checkAngel Pons
Code does not match comment, but this time the comment is right. Change-Id: I4e277a802c68c8a4e858b2e33e7ec69b41dd9773 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47044 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-07sb/intel/lynxpoint: Correct SATA DTLE IOBP registersAngel Pons
Testing shows that these registers are backwards. Use the definitions from Broadwell instead. All affected boards use the same value for both. Change-Id: Ie47c9fddc2e9e15ce4c64821ea3a69356ac31b1a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-07sb/intel: Don't set ACPI_EN twiceAngel Pons
It is already done once when enabling PMBASE in early init. Change-Id: I14289c9164ee1488c192fce721d86c89fa5cc736 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-07sb/intel/*/lpc.c: Don't try to write read-only PCICMD bitsAngel Pons
For all these southbridges, the lower nibble of PCICMD is read-only. Tested on Asrock B85M Pro4 (Lynxpoint-H), LPC's PCICMD does not change. Change-Id: Ib3b16b1b9651f7f3bd06ff8bc27dafd8a323e93c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-07mb/intel/adlrvp: Configure GPIOs to enable DMICSridhar Siricilla
The patch configures GPIO pins to enable DMIC. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I2907737071f7d6b3c88c492d90edf8455d1fa50a Reviewed-on: https://review.coreboot.org/c/coreboot/+/47279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-11-07mb/intel: Enable ALC711 Audio codec over SNDW0 linkSridhar Siricilla
The patch enables ALC711 Audio codec. Test=Verified on ADL RVP. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I73f480dad1047cebd7ffc66e0104ff10cacc300b Reviewed-on: https://review.coreboot.org/c/coreboot/+/47278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-11-07mb/intel/adlrvp: Enable TCSS xDCI, TBT PCIe RP and DMA controllersV Sowmya
This patch enables TCSS xDCI, TBT PCIe root ports and DMA controllers for ADLRVP. BUG=b:170607415 TEST=Built and booted on ADLRVP. Change-Id: Iabd6cc7c589d1c20cde9d66c0a63e2cf16316b33 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47288 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-07mb/intel/adlrvp: Configure the HPD GPIO'sV Sowmya
This patch configures the HPD1 and HPD2 GPIO's. BUG=b:170607415 TEST=Built and booted adlrvp. Verified the hotplug functionality is working. Change-Id: Ied2d4c56220212a15103e9a2fbd01ce6f0811a74 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-11-07vc/intel/FSP2_0/CPX-SP: update to ww45 release and add watermark optionJonathan Zhang
Intel CPX-SP FSP ww45 release annotates default values for FSP-M UPD variables. FSPM MemRefreshWatermark option support is present in FB's CPX-SP FSP binary, but not in Intel's CPX-SP FSP binary. In FB's CPX-SP FSP binary, this option takes the space of UnusedUpdSpace0[0]. For DeltaLake mainboard, if corresponding VPD variable is set, use it to control the behavior. Such control is effective when FB's CPX-SP FSP binary is used. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I57ad01f33b92bf61a6a2725dd1cdbbc99c02405d Reviewed-on: https://review.coreboot.org/c/coreboot/+/46640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2020-11-06sc7180: Correct mmu configuration for AOP SRAM regionsT Michael Turney
NOC errors detected at runtime in AOP SRAM region strongly suggested speculative memory accesses were occurring in memory regions that either don't exist or are device memory rather than SRAM. Signed-off-by: T Michael Turney <mturney@codeaurora.org> Change-Id: I6611dc614c80063c7df057b59337417c8f56fd9c Reviewed-on: https://review.coreboot.org/c/coreboot/+/47261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-11-06soc/amd/picasso: add Raven1 GPU PCI IDFelix Held
Change-Id: Id4460eb596b080dec1a63a20869182170c3388af Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-06soc/amd/picasso/cpu: add Raven1 CPUID to CPU tableFelix Held
The RV1 CPUID is already in the cpu.h file, but was still missing from the CPU table in cpu.c. Change-Id: Iad78cbe933b40e946d421e4c93e523f9e31f1089 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-06zork/var/ezkinil: Adjust USB2 phy si fine tune on DVT BoardLucas Chen
Adjust USB2 phy si setting fine tune on DVT for Ezkinil. BRANCH=zork BUG=b:156315391 TEST=Measuring scope timing and test usb detection Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Change-Id: Id537b6e9a17f47481b6aedcea0c6a8474d993b6d Reviewed-on: https://review.coreboot.org/c/coreboot/+/47011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-11-06mb/purism/librem_mini: Set unused GPIO pads to PAD_NCMatt DeVillier
Set numerous pads to PAD_NC as per board schematics (they are either NC, or connected to test pads), and adjust comments as needed. Change-Id: I4c2ab936256d0031d7a127fbeac42c8951a0b39f Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-06soc/amd/picasso: Set vboot hashing block size to 36kMartin Roth
On picasso's psp_verstage, the vboot hash is being calculated by hardware using relatively expensive system calls. By increasing the block size, we can save roughly 150ms of boot and S3 resume time. TEST=Build & boot see that boot time has decreased. BRANCH=Zork BUG=b:169217270 - Zork: SHA calculation in vboot takes too long Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I6642073357327811b415dcbcad6930ac6d2598f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46903 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-06soc/amd/picasso: Up stack size to 40k for vboot hash bufferMartin Roth
Increasing the vboot hash buffer size greatly speeds up the SHA calculations. Going from a standard 4k buffer to a 36k buffer takes ~150ms of the boot and resume time. TEST=Build & boot see that boot time has decreased. BRANCH=Zork BUG=b:169217270 - Zork: SHA calculation in vboot takes too long Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ibca868ad7be639c2a0ca1c4ba6d71123d8b83c92 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46902 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-06mb/google/volteer/var/elemi: Update gpio and devicetreeWisley Chen
Update gpio and devicetree for elemi. BUG=b:170604353 TEST=emerge-volteer coreboot and boot into kernel Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I5b8880d485ed73aa4e65c1249c58f02c8f0c6501 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47039 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-06mb/google/variant/elemi: config CSE LITEWisley Chen
Config elemi to use CSE LITE BUG=b:170604353 TEST=emerge-volteer coreboot Change-Id: I31c7a743645d6a34ee34e750ba92c108b306ee09 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47019 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-06mb/google/variant/elemi: Select USE_CAR_NEM_ENHANCED_V2 for elemiWisley Chen
BUG=b:170604353 TEST=emerge-volteer coreboot Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I1a1ab6f3d57d5023523b85bfb00d48d8b70a6c1f Reviewed-on: https://review.coreboot.org/c/coreboot/+/47018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-06security/vboot: Add Kconfig symbol to set hashing block sizeMartin Roth
Generally, this size probably doesn't matter very much, but in the case of picasso's psp_verstage, the hash is being calculated by hardware using relatively expensive system calls. By increasing the block size, we can save roughly 140ms of boot and resume time. TEST=Build & boot see that boot time has decreased. BRANCH=Zork BUG=b:169217270 - Zork: SHA calculation in vboot takes too long Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I68eecbbdfadcbf14288dc6e849397724fb66e0b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2020-11-06soc/intel/xeon_sp/skx: Fix MADT CPU indexesMarc Jones
The CPU index wasn't getting updated. Confirm MADT sets IOAPIC and CPU ID numbers. Change-Id: I72430cc48f4609ac408e723172ba1ed263cca8e3 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-11-06soc/intel/xeon_sp: Move CPU helper functionsMarc Jones
Continue Xeon-SP de-duplication. Move CPU helper functions from skx/ and cpx soc_util.c to common util.c. Functions only used by util.c are updated to be static. The following functions are moved: int get_threads_per_package(void); int get_platform_thread_count(void); const IIO_UDS *get_iio_uds(void); unsigned int soc_get_num_cpus(void); void get_core_thread_bits(uint32_t *core_bits, uint32_t *thread_bits); void get_cpu_info_from_apicid(uint32_t apicid, uint32_t core_bits, uint32_t thread_bits, uint8_t *package, uint8_t *core, uint8_t *thread); void xeonsp_init_cpu_config(void); Change-Id: I118a451b9468459cf2c2194f31da1055e1435ebe Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47170 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-06soc/intel/xeon_sp/cpx: Reorder cpu.c .h includesMarc Jones
Clean up the header includes. Change-Id: I9f61d1a82b37bc0ed803967dc64decf18f44adc9 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
2020-11-06amdfwtool: Use shell command to get depend file listZheng Bao
The amdfwtool is not available at the beginning of the building. So it may have error if it is missing. Change-Id: Id4db70986755cef8e98877c4e92841b25ced5452 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-06soc/amd/picasso: Update coreboot UPD variable names to include unitsZheng Bao
Use command below to change the variable globally. sed -i "s/\<variable\>/variable_u/g" `grep variable -rl ./ \ --exclude-dir=build --exclude-dir=crossgcc` BUG=b:171334623 TEST=Build Change-Id: I056a76663e84ebc940343d64178c18cb20df01a3 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-11-06mb/google/octopus/variants/garg: Add new LTE SKUKevin Chiu
Add new SKU definition: Garg360 (LTE DB,1A2C,TS, no stylus, rear camera) SKU ID - 39 BUG=b:170708728 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: Ifec4e1360bd1aff3825bc6413b0a2ccd8b822075 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47015 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-05soc/intel/tigerlake: Disable C1 C-state DemotionRavi Sarawadi
Disable C1 C-state auto demotion to decrease SoC power usage. When set, processor will conditionally demote C3/C6/C7 requests to C1 based on uncore auto-demote information. BUG=b:161215906 TEST=Measure and confirm SoC power usage reduction for key use cases eg 'Google Meets video call' Measured on instrumented boards for Volteer EVT and Delbin. Below measurements for Volteer: Google meets with 720p w/ auto-demotion w/o auto-demotion System Power 13.14W 9.4W SOC Power 7.9W 5.4W Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Signed-off-by: Shweta Malik <shweta.malik@intel.com> Change-Id: I649cafbaf03917d76521aa5f76ec58d218e1a1b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-05soc/amd/picasso: move MAX_CPUS setting from mainboard to SoC KconfigFelix Held
Since the mainboard Kconfig is sourced before the SoC one, it would still be possible to override this setting at mainboard level, even though that shouldn't be needed. The maximum CPU count for Picasso is 8, since the chips have only up to 4 cores with up to two threads each. Change-Id: I53449b8fa73c5d13e6ea77bee6eed8896b7d3ec3 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47205 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-05ec/google/chromeec: Remove the check for Internal TypeC MUXKarthikeyan Ramasubramanian
Integrated TypeC MUX is used only in certain SoCs and hence the missing devicetree configuration is not an error. Remove the check for internal TypeC MUX device and the associated debug statement. BUG=b:172186858 TEST=Build and boot to OS in Drawlat. Change-Id: Ieb76e1ccfd04f1628617b2665b05be6718a25f81 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-05mb/msi/ms7707/Kconfig: Drop invalid defaultsAngel Pons
The PCI ID corresponds to the iGPU, which is disabled in the devicetree. Also, the VBIOS file does not exist at the specified location. Change-Id: I4f128d3057dc7218f32320c4e23466eb31af4e54 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45672 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-05mb/purism/librem_mini: Drop DW0/DW1 from GPIO config commentsMatt DeVillier
These are generated by inteltool + intelp2m and reflect the pad configuration of the vendor (AMI) firmware at a specific point in time, but do not always reflect the correct configuration of a given pad as per the schematics, so drop them. Change-Id: Ie337cca5bc0e87a5426cceae8d7ec29ab14a1729 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47200 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-05mb/intel/adlrvp: Add support for DDR5 memorySubrata Banik
This patch adds DDR5 memory configuration parameters to FSP. TEST=Able to build and boot ADLRVP with DDR5 memory. Change-Id: I4711d66c7b4b7b09e15a4d06e28c876ec35bc192 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46485 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-05soc/intel/xeon_sp: Use common cpu/intel romstage entryArthur Heymans
This removes some boilerplate like starting the console and also adds a "start of romstage" timestamp. Change-Id: Ie85df5d244fa37c41f0b3177ca325c607fa54593 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-04haswell: Add Intel TXT support in romstageAngel Pons
Provide necessary romstage hooks to allow unblocking the memory with SCLEAN. Note that this is slow, and took four minutes with 4 GiB of RAM. Tested on Asrock B85M Pro4 with tboot. When Linux has tboot support compiled in, booting as well as S3 suspend and resume are functional. However, SINIT will TXT reset when the iGPU is enabled, and using a dGPU will result in DMAR-related problems as soon as the IOMMU is enabled. However, SCLEAN seems to hang sometimes. This may be because the AP initialization that reference code does before SCLEAN is missing, but the ACM is still able to unblock the memory. Considering that SCLEAN is critical to recover an otherwise-bricked platform but is hardly ever necessary, prefer having a partially-working solution over none at all. Change-Id: I60beb7d79a30f460bbd5d94e4cba0244318c124e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-11-04mb/purism/librem_cnl: Set SaGv to FixedHighAngel Pons
Since the Librem Mini does not run on battery power, SaGv has little benefits and noticeably slows down testing, since memory training is run twice. Disabling SaGv cuts the 30-second cold boot time in half. Change-Id: Ib02e42dcb4f20fdbdca85456c0dceafc59c782d8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-11-04sec/intel/txt: Add support for running SCLEAN in romstageAngel Pons
SCLEAN has specific requirements and needs to run in early romstage, since the DRAM would be locked when SCLEAN needs to be executed. Change-Id: I77b237342e0c98eda974f87944f1948d197714db Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-11-04sb/intel/lynxpoint/acpi/gpio.asl: Simplify constantsAngel Pons
Only LPT-LP includes this file, so `ISLP` is effectively constant. Thus, eliminate some unnecessary if-blocks, since only one branch gets taken. Change-Id: Ie8ba787bf5c021845e1e47256a6303697aa97fe1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46776 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04sb/intel/lynxpoint: Align LP GPIO ACPI with BroadwellAngel Pons
Move the `GWAK` method into the GPIO device, and have lpc.c include the LP GPIO code. All usages of `GWAK` on mainboards need to be updated. Change-Id: Id6a41f553d133f960de8b232205ed43b832a83d2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46775 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04sb/intel/lynxpoint/acpi: Put together LP GPIO codeAngel Pons
Rename `lpt_lp.asl` and place all Lynxpoint-LP GPIO ASL there. It has been named `gpio.asl` to ease diffs between Lynxpoint and Broadwell. Tested with BUILD_TIMELESS=1, Google Panther does not change. Change-Id: I7cc4ab3371014be783761f110542471a8c0157a3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46774 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell: Merge `device_nvs.asl` into `globalnvs.asl`Angel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 does not change. Change-Id: If5f1feb0cd43fe1e0514b4e3fa766da60e2b7603 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46773 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell: Include EC and IRQ links ACPI earlyAngel Pons
Other southbridges such as Lynx Point do it. This eases merging later. Change-Id: I10196bbc44ce859c2747755845378351f45944ae Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46766 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04sb/intel/*/acpi/lpc.asl: Drop unnecessary RCBA offsetAngel Pons
Nothing should be using this offset. Change-Id: Ia4736471e2ac53bec18bfe073f4aa49e3fc524a8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46765 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04sb/intel/lynxpoint: Expose full LPC device ID in ACPIAngel Pons
This is merely to align ACPI files with Broadwell. It is unused. Change-Id: I8aa297bd3c3734bbd438ff84742aadfc661adcf7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46764 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell/pch: Use common PCIe ACPI codeAngel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 does not change. Change-Id: I1f41ce943e25dceab79c7d7ee2ed797c392dcd52 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46763 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell/pch/acpi: Add PCIe register offsetsAngel Pons
These are present in common southbridge ACPI code, and also exist on Broadwell. Thus, add the definitions to align with common ACPI code. Change-Id: Ib0ad9da80920fe7c70986e541c50f6adccb49d0c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46761 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell/gma.c: Align struct with HaswellAngel Pons
Change-Id: Ifd1fb02497e1d326b6b9c5752f471f52b145a8ef Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-04sb/intel/common/acpi/pcie.asl: Generalise file commentAngel Pons
This file is no longer specific to 6 and 7 series PCHs. Change-Id: Ib89378bd6ba1d80281b92a79d37b9fdeaaed40fb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46762 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04sb/intel/common/acpi/irqlinks.asl: Clean up cosmeticsAngel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I8562fc3278144380b0ab842d88176114821be823 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46760 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell: Use common irqlinks.aslAngel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I9179c1b449925cc66628fc3266652b8237ab49e5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46759 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell/pch/acpi/irqlinks.asl: Add missing IRQsAngel Pons
Commit 2e1f764 (sb/intel/common/acpi/irqlinks.asl: Add missing IRQs) added these IRQs for Lynx Point and earlier southbridges. Follow suit for Broadwell, since it also supports them. Vendor firmware of the Asus X555LAB laptop also contains these IRQs, as per the disassembled DSDT. Change-Id: If857352dd25ba61c1f09c1ff4358efafdc3a5c73 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46758 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell: Align ACPI with Haswell/LynxpointAngel Pons
Drop unnecessary smbus.asl in favor of southbridge common code. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 does not change. Change-Id: I13b35d2155a2cede0a56846b8bf8a79d4ebfc7b3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46757 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04nb/intel/haswell: Place CTDP ASL code in a separate scopeAngel Pons
This is just to align the code with what Broadwell does. Change-Id: I52fb1546d049ca9fa09d0c54304ca1d79f6c4c3e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46756 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04nb/intel/haswell/acpi: Align with BroadwellAngel Pons
Align cosmetics and move CTDP-specific ASL into its own file. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 does not change. Change-Id: I476a4e01016caa3658177b0fa8916576f4a5e0e5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46755 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism/librem_mini: Drop community comments in GPIO configMatt DeVillier
These add nothing useful to the GPIO config Change-Id: Ieecc9bd67d020e141c3a1f1d387034df5e563068 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47190 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism/librem_mini: Update GPIO configMatt DeVillier
Update GPIO config using a fresh dump of inteltool from the vendor (AMI) firmware on a Librem Mini v2, run through intelp2m with parameters '-p cnl -n -ii' Change-Id: I747415fb9ab7b21943d256d248729cb9e2b4b945 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47206 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism_librem_mini: Add child device, slot descriptions to PCIe RPsMatt DeVillier
Change-Id: Id306100fc691dcbde48b65092d0be9d7e73c0722 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47189 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism/librem_mini: Reorganize devicetreeMatt DeVillier
Move registers under devices to which they belong. Change-Id: I61ca7c1db02646252d7421f8b79dfc8a40b2bdb5 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47188 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism/librem_mini: drop unused HeciEnabled registerMatt DeVillier
this should have been corrected as part of: commit 3de90d1 [soc/intel/cnl: Set Heci1Disable depending on devicetree config] Change-Id: I6a103a1de01fc258ef359258a8a64f4c5a181139 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47187 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism/librem_mini: Increase TDP/PL2 settingMatt DeVillier
PL2 was set artificially low during development when the active cooling fan was not functional, and never corrected once the fan was fixed. Raise PL2 to a value which works with both Librem Mini variants. Change-Id: Ie377392020f73359aed80ddae727adb6f8d06344 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-04mb/purism/librem_mini: Drop devicetree settings which default to 0Matt DeVillier
All chip registers default to 0, no need to explicitly set them. Change-Id: I056121170d22393484b0ee79bd0815452161a900 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 16:25:38 +0000