summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2018-07-11mediatek: Share MMU operation code among similar SOCsTristan Shieh
Refactor MMU operation code which will be reused among similar SOCs. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Elm Change-Id: Id8173da0a02e57e863263fcd89c91a9c089e8a0f Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-11mainboard/google/kahlee: Update existing SPD filesMartin Roth
Add an extra space after 8th value on each line to make it easier to count the values. Update the empty spd to remove two random 0x80 values. BUG=None TEST=None Change-Id: If330dbf0c133f65aedddc58ecb351a80b0e45a05 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/27423 Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-11mainboard/google/kahlee: Add additional SPDs for variantsMartin Roth
BUG=b:111079089, b:80375243 TEST=Build grunt, verify that SPDs are included. Change-Id: Idb03a3fa0842f7f89bb8c66dedbb8a0b293569be Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/27422 Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-11riscv: add support to check ISA extensionXiang Wang
Add support to check ISA extension for RISC-V. Change-Id: I5982fb32ed1dd435059edc6aa0373bffa899e160 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-07-10src/sb/amd/pi/hudson/sd.c: disable SDR50 tuning and set correct clock freq ↵Michał Żygowski
in SD2.0 mode According to BKDG for AMD Family 16h Models 30h-3Fh Processors SDR50 tuning should be disabled in 0xA8 register. Also fix clock frequency setting in 0xA4 for stepping >= A1 which caused reduced performance of SD cards transfer speed even by half. Change-Id: I80ca754b0c89e08aa90ff885467c7486a3efb999 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/27359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-10soc/cavium: Add secondary CPU supportPatrick Rudolph
Change-Id: I07428161615bcd3d03a3eea0df2dd813e08c8f66 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-07-10soc/cavium/cn81xx: Set cntfrq_el0Patrick Rudolph
Set cntfrq_el0 to provide correct timer frequency. Change-Id: I4b6d0b0cf646a066fc5a51552a1891eccbd91e5e Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25450 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-10mb/cavium/cn8100_sff_evb: Be verbosePatrick Rudolph
Print some useful information about the board. Change-Id: I0acac7a29290bc2eb9f4283317165fa0cf1b24e1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25449 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-10soc/cavium: Clean uart codePatrick Rudolph
* Only init UART_FOR_CONSOLE * Allow UART init with zero baudrate. * Init UART0..3 on Cavium's cn8100_sff_evb to fix kernel panic. Tested on CN8100_SFF_EVB. Change-Id: I1043b30318ec6210e2dd6b7ac313a41171d37f55 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-07-10soc/cavium: Enable MMUPatrick Rudolph
* Configure and enable MMU. * Cover the whole I/O space. * A minimum of 512KB TTB space is required. * Use secure mem attribute as firmware is running in ARM TZ region. Tested on Cavium SoC. Change-Id: I969446da62b4cc7adf9393fab69ff84ebf49220d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-07-10cavium: Add CN81xx SoC and eval board supportDavid Hendricks
This adds Cavium CN81xx SoC and SFF EVB files. Code is based off of Cavium's Octeon-TX SDK: https://github.com/Cavium-Open-Source-Distributions/OCTEON-TX-SDK BDK coreboot differences: bootblock: - Get rid of BDK header - Add Kconfig for link address - Move CAR setup code into assembly - Move unaligned memory access enable into assembly - Implement custom bootblock entry function - Add CLIB and CSIB blobs romstage: - Use minimal DRAM init only devicetree: - Convert FTD to static C file containing key value pairs Tested on CN81xx: - Boots to payload - Tested with GNU/Linux 4.16.3 - All hardware is usable (after applying additional commits) Implemented in future commits: - Vboot integration - MMU suuport - L2 Cache handling - ATF from external repo - Devicetree patching - Extended DRAM testing - UART init Not working: - Booting a payload - Booting upstream ATF TODO: - Configuration straps Change-Id: I47b4412d29203b45aee49bfa026c1d86ef7ce688 Signed-off-by: David Hendricks <dhendricks@fb.com> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/23037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-07-09src/southbridge: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: I72d50615d77b91529810e8f590fa56f3c6f7546c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-09src/soc: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: I21680354f33916b7b4d913f51a842b5d6c2ecef3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27408 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-09src/northbridge: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: Iaf86a0c91da089b486bd39518e5c8216163bf8ec Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27407 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-09src/mb: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: Iedc2e48349e40e94863c8080d11e11dbe6084c9d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-09src/{ec,include,lib}: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: I447aaa1850b7e8b514a8c4c04bf5b426d3d1cd0a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-09src/{device,drivers}: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: Ic1c9b1edd8d3206a68854107ddcbc5c51cb487c3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-09src/{arch,commonlib,cpu}: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: I8e4118c5c5d70719ad7dc5f9ff9f86d93fa498ac Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26942 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-09soc/intel/skylake: config ISH in SOC sideli feng
Config ISH in SOC side by checking if ISH device is turned on. "IshEnable" is not needed anymore since ISH device on/off will tell if ISH should be enabled or not. "IshEnable" will be removed from chip.h in separate CL. Atlas board specific ISH setting is needed, which is committed in separate CL. BUG=b:79244403 BRANCH=none TEST=Verified on Atlas board with ISH rework. ISH log showed on console. Change-Id: I3fc8648b3e6551497617ef1ebd2889245cdd31c3 Signed-off-by: li feng <li1.feng@intel.com> Reviewed-on: https://review.coreboot.org/26485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-09ec/lenovo/h8/acpi: Add BDC interfacePatrick Rudolph
* Add SSDT generator to add dynamic ACPI code. * Implement GBDC and SBDC for thinkpad_acpi kernel module. Required for BDC power control from userspace. Tested on Lenovo T430: The bluetooth module is detected and can be powercycled using network manager. Change-Id: Ida825196650966194a883945896a038b0790fe45 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-06superio: move files to match the common naming schemeFelix Held
Change-Id: I1a8fc34aaaf42514c8af97ab155ff2712e7a5448 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/23009 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-06src: Add missing license headersMartin Roth
These two files were added before I was able to get the updated linter committed. Updated/Add the headers so the stable header lint check can be updated. Change-Id: I464ddecb5eebe8c5b907f3dcfeab1b06501af6ab Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/27362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-06riscv: use __riscv_atomic to check support A extensionXiang Wang
GCC pre-defined some macros for detecting ISA extensions. We should use these macros to detect ISA features. Change-Id: I5782cdd1bf64b0161c58d789f46389dccfe44475 Signed-off-by: XiangWang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-07-06google/grunt: Update Raydium TS device ACPI nodesKevin Chiu
change I2C irq to EDGE trigger BUG=b:110962003 BRANCH=master TEST=emerge-grunt coreboot Raydium TS is working. Change-Id: Iff3acf4199d23b29dff209ec1c03a731679c6cbe Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/27327 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-06mb/google/octopus: Enable tablet modeJustin TerAvest
This change configures ACPI to properly route notifications from the EC for tablet mode events to userspace. Relevant EC config changes are at: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1125261 BUG=b:111078678 TEST=With EC change, tablet mode detected by evtest and powerd Change-Id: Ifbc318186b195534f647f062544de4968aa87401 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/27346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jett Rink <jettrink@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-06ec/lenovo/h8/acpi: Move ACPI HKEY device to new filePatrick Rudolph
Move the APCI HKEY device to a new file and include it. The follow-up commits will extend it and this way it remains readable. Change-Id: Ie59b59e5a4148807125c71a362161026f685a97e Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/22463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2018-07-06mb/google/poppy/variants/nocturne: fix FPMCU IRQ sensitivityVincent Palatin
the FPMCU_INT_L on GPP_C11 is active low but the kernel irq handler is defined as IRQF_TRIGGER_LOW, so do not invert it twice. BRANCH=poppy BUG=b:78613978 TEST=On Nocturne, the 'cros_ec' IRQ count in /proc/interrupts does not increment wildly. Change-Id: I56c13c797b133dd22669a2299bcd16ef14eed335 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: https://review.coreboot.org/27221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-06mb/intel/d945gclf/romstage.c: Remove unneeded includesElyes HAOUAS
Change-Id: I3bdb93e51cabbfc14fe992ccdb6556e344e03c2f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-07-06mb/ibase/mb899: Remove unneeded includesElyes HAOUAS
Change-Id: Iee237206f309409be64307d2daee044da52a05e1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-07-06google: Use proper ACPI ID for Semtech chips: STHGwendal Grignou
Change-Id: I85cd567a923cccd2504f351aae276b5f0d9db4de Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/27347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt Delco <delco@google.com> Reviewed-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-03soc/cavium: Integrate BDK files into corebootDavid Hendricks
* Make it compile. * Fix whitespace errors. * Fix printf formats. * Add missing headers includes * Guard headers with ifdefs Compile DRAM init code in romstage. Compile QLM, PCIe, RNG, PHY, GPIO, MDIO init code in ramstage. Change-Id: I0a93219a14bfb6ebe41103a825d5032b11e7f2c6 Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/25089 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-03soc/amd/stoneyridge: correct GPIO emission error in ACPIKevin Chiu
It can not emit byte data without BytePrefix. design to: Or (Local5, GPIO_PIN_OUT, Local5) error due to GPIO_PIN_OUT is 0x40 but 0x40 encoding means nothing in AML spec. so it will include next emitted string in Or: Or (Local5, Local5, \_SB.GPW2) fix: Store (0x40, Local0) Or (Local5, Local0, Local5) BUG=b:110962003 BRANCH=master TEST=emerge-grunt coreboot extract SSDT then check ACPI syntax is correct Change-Id: I7a0704112b77105826de87b14a38ed2f665224d5 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/27306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-03mb/pcengines/apu1: use generic SPDMichał Żygowski
Clean up leftovers of old SPD generation and utilize common procedure to produce SPD binary. Change-Id: I4e48817c03b4372887bc0ea14209736ae2b4e48f Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/27301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-03drivers/pc80/vga: Fix coding styleElyes HAOUAS
Change-Id: I0452407d1346ca8ead2638e2a31269931ea5d12e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-03mb/intel/dg43gt: Expose some SIO devices via ACPIArthur Heymans
Change-Id: I0df578b98c5b346caa6f6df5fdabda28788e6b66 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-03mb/intel/dg41wv: Expose some SIO devices via ACPIArthur Heymans
Change-Id: Ia658c117434c3fae45bbbe6c472ca58ba4f1a117 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-03ec/google/chromeec: Remove keyboard initializationFurquan Shaikh
Since none of the boards using chromeec select DRIVERS_PS2_KEYBOARD now, there is no need to call pc_keyboard_init anymore. This change gets rid of the call and adds an error message in case any mainboard using chromeec tries to select this config. BUG=b:110024487 Change-Id: Ia0b56abe0a5990e527277eaf3397e00dccda3e50 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-03mb/intel/glkrvp: Get rid of DRIVERS_PS2_KEYBOARD selectionFurquan Shaikh
Until now, chromeec was doing keyboard initialization for the boards that have DRIVERS_PS2_KEYBOARD selected. However, coreboot does not leave the keyboard controller in a default reset state. This could result in payloads or OS failing to probe the controller as there could be stale data buffered in the controller during the handoff. Since the boards using chromeec already perform keyboard initialization in payload, there is no need to initialize the keyboard in coreboot too. This change gets rid of DRIVERS_PS2_KEYBOARD selection from all google mainboards using chromeec. BUG=b:110024487 Change-Id: I9af48e648231c18f98d0cc1ddd178b8d00082b0a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-03mb/google/*: Remove selection of DRIVERS_PS2_KEYBOARDFurquan Shaikh
Until now, chromeec was doing keyboard initialization for the boards that have DRIVERS_PS2_KEYBOARD selected. However, coreboot does not leave the keyboard controller in a default reset state. This could result in payloads or OS failing to probe the controller as there could be stale data buffered in the controller during the handoff. Since the boards using chromeec already perform keyboard initialization in payload, there is no need to initialize the keyboard in coreboot too. This change gets rid of DRIVERS_PS2_KEYBOARD selection from all google mainboards using chromeec. BUG=b:110024487 TEST=Keyboard works fine after booting to OS even if user hits keys during BIOS to OS handoff. Change-Id: I1f49b060eb005c0f2b86f9d68d6758954eeb3cf0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27291 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-02arch/x86: add SMM callerPatrick Georgi
Useful for debugging or for cases where we need to enter SMM. Probably should be moved to commonlib or libpayload. Change-Id: I7a9cc626dae9a7751034615ef409eebc6035f5c3 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/25193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-02src: Get rid of unneeded whitespaceElyes HAOUAS
Change-Id: I3873cc8ff82cb043e4867a6fe8c1f253ab18714a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-02src/nb: Fix non-local header treated as localElyes HAOUAS
Change-Id: I8174d7b40008cfe4fba10fde4670682aac0ad078 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-02src/sb: Fix non-local header treated as localElyes HAOUAS
Remove some unneeded includes. Change-Id: I4b9bcb74b6441db9e44fe471b9cd789e42e7093a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-02src/mb: Fix non-local header treated as localElyes HAOUAS
Also remove some unnedded includes. Change-Id: I036208a111d009620d8354fa9c97688eb4e872ad Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-02mb/lenovo/t400: Change CMOS value name to Dual GraphicsNico Rikken
To uniform the naming of the 'Dual Graphics' mode amongst the ThinkPads that support it, the T400 CMOS value needs a change. This was the outcome of a discussion on another patch: https://review.coreboot.org/#/c/coreboot/+/23040/ This might cause breakage for automated NVRAM configuration scripts, and manuals. I only found one manual using the previous 'Switchable' option: https://libreboot.org/docs/install/r400_external.html#a-note-about-gpus Change-Id: I2e4d8bafbae5de97c78dab118f75fdefff1d7c37 Signed-off-by: Nico Rikken <nico@nicorikken.eu> Reviewed-on: https://review.coreboot.org/27158 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-07-02stoneyridge: Enable legacy IORaul E Rangel
Legacy IO enables access to RTC IO 0x70-0x73. This is needed for CMOS to function correctly. BUG=b:110817463 TEST=ran firmware_CorruptFwSigB on grunt Change-Id: I533226ba764f567e348577d7fcf6ebe43336609a Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-02stoneyridge: Enable IO CF9 in bootblockRaul E Rangel
If IO CF9 is not enabled, hard_reset() won't do anything in bootblock or verstage. BUG=b:110817463 TEST=built on grunt and made sure that hard_reset() reboots. Change-Id: I5f091077a17db3dfe5b8e8367163312db6828360 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27267 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-02ec/google/chromeec: Remove notify for power buttonFurquan Shaikh
None of the mainboards using Chrome EC set SCI mask for power button. Thus, the EC will never generate SCI for power button events. This change removes the Notify call for power button as part of clean up for getting rid of the power button device in coreboot. BUG=b:110913245 Change-Id: I86c72fd82f1a0e6d5693ebbcd58e2aea808f8817 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-02mediatek/mt8183: Add mtcmos init supportTristan Shieh
Using common mtcmos code to power on audio and display modules in SOC. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui. Passes the status check at the end of mtcmos_power_on() Change-Id: I41f16ba36432a8bbc47793cec2979753c9f84b43 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-02mediatek: Move mtcmos code to a common directoryTristan Shieh
Move mtcmos code which can be reused into a common directory under soc/mediatek. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Elm Change-Id: I92b138890424b4f4a68cdb00bf2326eef9cd87b7 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27029 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-02mediatek: Share mtcmos code among similar SOCsTristan Shieh
Refactor mtcmos code which will be reused among similar SOCs. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Elm Change-Id: Ibfd0a90f6eba3ed2e74a3fd54279c7645aa41774 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-02soc/amd/common: Change create_struct return valueKyösti Mälkki
Old return value was not used, and function body has die() in case of errors in allocation. Change-Id: I89b0e9c927d395ac6d27201e0b3a8658e9585187 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-02soc/amd/common: Fix agesawrapper CreateStruct callsKyösti Mälkki
When AllocationMethod == ByHost, buffer has to be provided by caller. Improve code symmetry, the named parameter is now always pointer to the struct. Change-Id: I2085f7d5d63ef96f4bd9d5194af099634c402820 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-07-02mainboard/google/nocturne: Enable IPU3Lijian Zhao
Enable Image Processing Unit and CIO2 device that constitute IPU3. BUG=None TEST=Build and boot up into Nocturne platform and check with lspci. Change-Id: Ic2edf5ec7bde5c55ce1b13cf7b680094a9fffc6a Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Reviewed-on: https://review.coreboot.org/27124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-02mainboard/google/nocturne: Set camera power sequenceLijian Zhao
To make image sensor working, the intended power sequence need to applied. BUG=NONE TEST=NONE Change-Id: I4833c0e303174b297c1d193495e08e55d294a717 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Reviewed-on: https://review.coreboot.org/27094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-02mainboard/google/nocturne: Enable camera sensorsLijian Zhao
Sensors and CSI2 receiver configuration for Nocturne platform. IMX355 module has VCM, NVM and is on the second port of receiver. IMX319 module has NVM and is on the first port of receiver. Change-Id: I37c877df8062d5c79e25ed27775ab58e977555db Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Reviewed-on: https://review.coreboot.org/26283 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-02commonlib/storage: Make sd_mmc_go_idle an apiBora Guvendik
change sd_mmc_go_idle to be accessible from other files so that we have an api to send CMD0 and reset the card. BUG=b:78106689 TEST=Boot to OS Change-Id: I064a9bded347be5d500047df92d1c448c3392016 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/25066 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-02nocturne: Do not set 4 LSB of SX9310 CRTL0Gwendal Grignou
These bits start the acquisition process. They should only be set by the driver. BUG=b:74363445 TEST=compile Change-Id: I9e10f5570ac82124f7f4b5cc7aaad27da0c578be Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/27265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-02nocturne: Fix casing for register definitionGwendal Grignou
Use lower case for hex values. BUG=b:74363445 TEST=compile Change-Id: I24afea58b1a791fac3c87ad397a696f7f6e0d127 Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/27264 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-02mb/google/poppy/variants/nami: Perform PL2 setting for sonaJohn Su
According to sona thermal table, PL2 need to check cpu id. And then set PL2 value. BUG=b:110867809 TEST=The thermal team verify OK Change-Id: I5759fb3c685e3d4eef1be054541f950843d19874 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27260 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-06-30soc/intel/skylake: Generate ACPI RMRR tableMatt DeVillier
An ACPI RMRR table is requried for IOMMU to work properly with an iGPU (without using passthrough mode), so create one along with the DRHD DMAR table if the iGPU is present and enabled. Test: build/boot google/chell and purism/librem13v2 with kernel parameter 'intel_iommu=on' but without 'iommu=pt;' observe integrated graphics functional without corruption. Change-Id: I202fb3eb8618f99d41f3d1c5bbb83b2ec982aca4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Youness Alaoui <snifikino@gmail.com>
2018-06-30arch/x86/acpi: Add DMAR RMRR helper functionsMatt DeVillier
Add DMAR RMRR table entry and helper functions, using the existing DRHD functions as a model. As the DRHD device scope (DS) functions aren't DRHD-specific, genericize them to be used with RMRR tables as well. Correct DRHD bar size to match table entry in creator function, as noted in comments from patchset below. Adapted from/supersedes https://review.coreboot.org/25445 Change-Id: I912b1d7244ca4dd911bb6629533d453b1b4a06be Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27269 Reviewed-by: Youness Alaoui <snifikino@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-29mb/google/poppy: Fix bytes 145-146 in nayna_dimm_NT6CL256T32CM SPDT.H. Lin
nayna/NT6CL256T32CM-H1 file change byte 145/146 to be"20" for JEDEC spec BUG=b:79443146,b:109708239 BRANCH=nami TEST=emerge-nami coreboot chromeos-bootimage Test on R69.10825 with mosys Change-Id: Iadc820111f0aed34e5b46d7e23dff44cb5bb811d Signed-off-by: T.H. Lin <t.h_lin@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27275 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-29src/device: Add check for existence and validity of PCIE base address configAamir Bohra
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I89b0e9c927d395ac6d27201e0b3a8658e958518d Reviewed-on: https://review.coreboot.org/27263 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-29soc/intel/baytrail: Fix Kconfig for mrc.bin inclusionArthur Heymans
It used the sandybridge systemagent binary and mentioned that in the help text which is simply wrong and won't work. This copies the nb/intel/haswell/Kconfig to not include an mrc.bin by default. Change-Id: I2e151a66abc6dab710abdbb92c0c28884d88912e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27140 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-29sb/intel/i82801{g,j}x: Automatically generate ACPI PIRQ tablesArthur Heymans
Both southbridges need to be done at once since this southbridge code is used for different northbridges, which fails to compile when done separately. This needs an acpi_name functions in the northbridge code to be defined. TESTED on Intel DG43GT: show correct PIRQ ACPI entries in /sys/firmware/acpi/tables/SSDT. Change-Id: I286d251ddf8fcae27dd07011a1cd62d8f4847683 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-29sb/intel/i82801ix: Use the common ACPI pirq generatorArthur Heymans
For this to work the northbridge and lpc bridge device need acpi_name functions. TESTED on Thinkpad X200, a valid PIRQ routing in SSDT in /sys/firmware/acpi/tables/SSDT Change-Id: I62e520f53fa3f928a8e6f3b3cf33af2acdd53ed9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-28drivers/intel/fsp2_0: Fix uncountable "information"Elyes HAOUAS
Change-Id: I91e13a786b12328f1d9200f76788faa19847bbe7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-28nocturne: Fix uid and desc for sx9310Enrico Granata
This commit changes the uid and desc fields for the sx9310 entries in the devicetree to be unique, and correctly identify the position of the respective sensors. Change-Id: I501df7d3349fdebc9673c9815f5b1b2458abac6e Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/27248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
2018-06-28amd/common/pi: Remove AGESA support files from bootblockMarshall Dawson
The stoneyridge bootblock no longer makes AGESA calls. Remove the support files from the bootblock build. TEST=boot Grunt Change-Id: I14d2336d5fb766a1acf5e812337ae0ab3ca4a6c1 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/27255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-28amd/common/pi: Remove obsolete heapmanager workaroundMarshall Dawson
Remove residual code that allowed successful building of the heapmanager code. Now that stoneyridge no longer makes AGESA calls in bootblock, it is safe to elimate the workaround. BUG=b:74518368 TEST=boot Grunt Change-Id: Ie169a691a177bcd8283c31c8188ce28bcbce82af Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/27254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-28mb/*/*/cmos.layout: Fix coding styleElyes HAOUAS
Change-Id: I4f82482595b0e6c6159c6e1c66158bc18b061f04 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-28fsp_broadwell_de: Add ability to set PCIe completion timeoutDavid Hendricks
This enables the user to set the completion timeout value in PCI Express Device Control 2 register via devicetree.cb. Based on corebootBDE-270-iou-complto.patch in Arista EOS 4.20 release. Change-Id: If0527899bc2047d0e57c11f7801768d07f9a5179 Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/26225 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-06-28arch/x86: include verstage.c only when verstage is a separate stageArthur Heymans
Change-Id: Ia75205001f2443cb8221a0762f182aae01ee615e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26924 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-28soc/intel/skylake: clear MCA before booting to OSPratik Prajapati
mca_configure needs to be called for each core before booting to OS, else OS would keep dumping MCEs Change-Id: I95ca46fda7be65d74714bdb344e339922cbb6305 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/26392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-06-28intel/common: change mca_configure API's defPratik Prajapati
add an unused param so that mca_configure can be called by mp_run_on_all_cpus to run it on all cores. Change-Id: I2395ee7fbedc829f040959b0021967f800693eeb Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/26391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-06-28devicetree: Add method to delete property by namePatrick Rudolph
Will be used on Cavium SoC to delete devicetree entries that aren't available with the board/configuration. Change-Id: I7c58a2411206bca62d0e96fa627530e937383ac9 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-06-28smm: Add canary to end of stack and die() if a stack overflow occursRaul E Rangel
If CPU 0's stack grows to large, it will overflow into CPU 1's stack. If CPU 0 is handling the interrupt then CPU 1 should be in an idle loop. When the stack overflow occurs it will override the return pointer for CPU 1, so when CPU 0 unlocks the SMI lock, CPU 1 will attempt to return to a random address. This method is not foolproof. If code allocates some stack variables that overlap with the canary, and if the variables are never set, then the canary will not be overwritten, but it will have been skipped. We could mitigate this by adding a larger canary value if we wanted. I chose to use the stack bottom pointer value as the canary value because: * It will change per CPU stack. * Doesn't require hard coding a value that must be shared between the .S and .c. * Passing the expected canary value as a parameter felt like overkill. We can explore adding other methods of signaling that a stack overflow had occurred in a follow up. I limited die() to debug only because otherwise it would be very hard to track down. TEST=built on grunt with a small and large stack size. Then verified that one causes a stack overflow and the other does not. Stack overflow message: canary 0x0 != 0xcdeafc00 SMM Handler caused a stack overflow Change-Id: I0184de7e3bfb84e0f74e1fa6a307633541f55612 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27229 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-28mediatek/mt8183: Remove the stub flash driver that planned to use eMMCTristan Shieh
The stub flash driver is a temporary hack that planned to adapt eMMC to SPI flash. Remove the hack since SPI flash is what we really expect. BUG=b:80501386 BRANCH=none TEST=Boots fine on Kukui Change-Id: If29869461fc8c2efe26bb8c901737ee85935d27f Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-06-28mb/google/poppy/variants/nautilus: Use GPP_B20 to determine SKUSeunghwan Kim
We would use GPP_B20 instead of board id to determine nautilus SKU. BUG=b:80052672 BRANCH=poppy TEST=Verified the new coreboot could determine SKU correctly Change-Id: I1978b544eef7a184a3da191306ee32d862fa8c36 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27220 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-28mb/google/octopus: Create bobba variantJustin TerAvest
This creates a bobba variant for octopus. The devicetree overrides are copied from fleex, otherwise everything just defaults to baseboard settings. BUG=b:110781720 TEST=None Change-Id: Ic30c6b0d955ce26f4a9f40cd7fef1c429ab950fc Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/27223 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-28mb/google/poppy/variants/nocturne: Update TSR sensor infoSumeet Pawnikar
This patch updates TSR sensor info with appropriate names. Also, updates Charger effect with correct TSR sensor mapping. BUG=None BRANCH=None TEST=Build coreboot for Nocturne board. Change-Id: Ia3bbc78f8d823e88a91265e0d55c5ac2a4ea31a9 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/27210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-06-28vboot: Fix linking error with USE_OPTION_TABLE enabledPatrick Rudolph
Fix a linking problem with VBOOT and USE_OPTION_TABLE enabled. Make use of cbfs_locate_file_in_region() and always search the cmos_layout.bin in the 'COREBOOT' region. With this change applied there's no need to include the vboot_locator in SMM any more, we can't break NVRAM with different CMOS layouts, and we keep VBOOT and non VBOOT behaviour the same. Only include cmos_layout.bin and cmos.default in RO region. Add notes explaining the decisions. Tested on Intel Sandybridge, builds and boots with vboot enabled. Change-Id: I10ae94d7936581bbb5ea49384122062bd4934ea5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-28soc/intel/common/block: Move p2sb common functions into block/p2sbSubrata Banik
This patch cleans soc/intel/{apollolake/cannonlake/skylake} by moving common soc code into common/block/p2sb. BUG=b:78109109 BRANCH=none TEST=Build and boot KBL/CNL/APL platform. Change-Id: Ie9fd933d155b3fcd0d616b41cdf042cefe2c649a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-28soc/intel/apollolake: Remove dead filesFurquan Shaikh
Change a86d1b8 (soc/intel/common: Add SMM common code for Intel Platforms) moved APL to use common SMM code. However, smi.c and smm.h files under soc/intel/apollolake/ were not removed. This change removes the dead files since they are not used anymore. BUG=b:110836465 Change-Id: I1ff213372521fd47e2335de6a4b438d16c74ecd3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-28soc/intel/common: Disable GPEs just before enabling SMIsFurquan Shaikh
Call to pmc_disable_all_gpe is required before enabling SMIs to ensure that we do not end up in a recursive SMI handler loop as mentioned in change 74145f7 (intel/common/pmc: Disable all GPEs during pmc_init). Thus, this call was added at the end of pmc_fill_power_state as we want to ensure that all the GPE registers are backed up before being cleared for identifying the wake source in ramstage. This resulted in a side-effect on APL where pmc_fixup_power_state was called much later in the boot process. Even though we have got rid of pmc_fixup_power_state, this change moves the call to pmc_disable_all_gpe to happen just before enabling SMIs. This helps to keep the disabling of GPEs logically before the enabling of SMIs and any clean ups that happen in pmc or soc-specific code should not affect the state of GPEs. BUG=b:110836465 TEST=Verified that wake sources are correctly identified on KBL and APL. Also, no SMI handler issues observed when resuming. Change-Id: I122a8118edcec117f25beee71a23c0a44ae862ed Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-28soc/intel/common/block/pmc: Get rid of pmc_fixup_power_stateFurquan Shaikh
Now that APL does not need pmc_fixup_power_state, this function can be removed from the PMC common code as well. BUG=b:110836465 Change-Id: I94de41f3e52228bca4b7a5579afe5a23719429be Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-28soc/intel/apollolake: Remove call to pmc_fixup_power_stateFurquan Shaikh
On APL, call to pmc_fixup_power_state was added because GPE0_EN registers did not have the right bits set on resume from S3 -- this was a result of GPE_CFG registers getting reset to their default state on resume. GPE_CFG registers are programmed as part of pmc_gpe_init which was previously done only in ramstage. However, with change a673d1c (soc/intel/apollolake: Initialize GPEs in bootblock), call to pmc_gpe_init was added to bootblock which means that GPE_CFG registers will have the right state by the time control reaches romstage where pmc_fill_power_state is called. Thus, call to pmc_fixup_power_state is totally redundant and in fact leads to side-effects because of the call to pmc_disable_all_gpe at the end of pmc_fill_power_state. BUG=b:110836465 TEST=Verified on yorp that wake source is correctly identified on resume from S3. Change-Id: Ia63ddbe381ce8a59736c231d745fd71d008d5d92 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-27smm: Switch from %edx to %ebxRaul E Rangel
%edx gets clobbered before the c handler is invoked. This is just a cleanup cl to make the next cl look clean. BUG=b:80539294 TEST=verified SMI still works on grunt. Change-Id: I21bf41ed4fdeaaa8737c883f202a39cb57c2b517 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27228 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-27smm: Push a null stack base pointerRaul E Rangel
When generating a backtrace we need an indicator when we have hit the beginning of the stack. The i386 ABI states that %ebp points to the next stack frame. NULL can be used to indicate the end of the stack. We could add a NULL return pointer at %ebp+4, but I decided to omit it since a NULL stack pointer can be used as an indicator that there is no return pointer. BUG=b:80539294 TEST=built and tested on grunt Change-Id: I8a48114d31a5c716335d264fa4fe4da41dc5bf11 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27226 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-27smm: Make local variables relative to ebpRaul E Rangel
This reduces the cognitive overhead of referencing locals via esp since it changes with every push. BUG=b:80539294 TEST=built and booted on grunt. Change-Id: Ib7eb98ce3483d4fc803696c1b2496d8384317536 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27225 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-27smm: Clear SMRAM when debuggingRaul E Rangel
This makes it easier to spot unused RAM. BUG=b:80539294 TEST=built and tested on grunt. Verified unused memory was set to 0xcdcdcdcd Change-Id: I335eaf642bd8526f31819eaac95ce80c2df3c300 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-27mb/google/*: Add a few VBT filesMatt DeVillier
These files are directly extracted from the vendor firmware Change-Id: I1f05c913872c5d2d8c8279d89eac52fd4bf4e35e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27222 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-27drivers/intel/fsp1_1: Fix vbt_len typeMatt DeVillier
Type of vbt_len should be size_t, change to fix compiler error Change-Id: I22798fa0edb98fcb9acc1b2dd52f34a61bc511e9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-27cpu/intel/p4-netburst: skip caching rom on model_fxxArthur Heymans
An unidentified combination of speculative reads and branch predictions inside WRPROT-cacheable memory can cause invalidation of cachelines and loss of stack on models based on NetBurst microarchitecture. Therefore disable WRPROT region entirely for all family F models. As an extreme example, just changing the location of a constant string passed to printk() has been witnessed to make a the boot fail early on in romstage. Change-Id: I1df84ad55e2d8d6d4e8dca10125131b5f525f0d7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-27x86/car: Replace reference of copy_and_run locationKyösti Mälkki
For cases with POSTCAR_STAGE=y this reference pulled in the implementation of run_ramstage() which we would not call. Using _program results with the same region being marked as WRPROT-cacheble. Change-Id: Ie1eaf6f5bb8baa13e946112c4fc3d854dbf750a3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Keith Hui <buurin@gmail.com>
2018-06-27lib/rmodule: Fix indentationKyösti Mälkki
Change-Id: Ieb809a078356f696afd813c39c65da1d7c7482c8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-27stage_cache: Disable when APCI S3 is not possibleKyösti Mälkki
Don't consume CBMEM for stage cache when we would never use it. Change-Id: I606e0457ff3085822554c4041fc56f0d28cc9c2d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-26arm64: Reimplement mmu_disable() in assemblyJulius Werner
Disabling the MMU with proper cache behavior is a bit tricky on ARM64: you can flush the cache first and then disable the MMU (like we have been doing), but then you run the risk of having new cache lines allocated in the tiny window between the two, which may or may not become a problem when those get flushed at a later point (on some platforms certain memory regions "go away" at certain points in a way that makes the CPU very unhappy if it ever issues a write cycle to them again afterwards). The obvious alternative is to first disable the MMU and then flush the cache, ensuring that every memory access after the flush already has the non-cacheable attribute. But we can't just flip the order around in the C code that we have because then those accesses in the tiny window in-between will go straight to memory, so loads may yield the wrong result or stores may get overwritten again by the later cache flush. In the end, this all shouldn't really be a problem because we can do both operations purely from registers without doing any explicit memory accesses in-between. We just have to reimplement the function in assembly to make sure the compiler doesn't insert any stack accesses at the wrong points. Change-Id: Ic552960c91400dadae6f130b2521a696eeb4c0b1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-26arm64: Switch remaining uses of __ASSEMBLY__ to __ASSEMBLER__Julius Werner
Some arm64 files that were imported from other projects use the __ASSEMBLY__ macro to test whether a header is included from a C or an assembly file. This patch switches them to the coreboot standard __ASSEMBLER__, which has the advantage of being a GCC builtin so that the including file doesn't have to supply it explicitly. Change-Id: I1023f72dd13857b14ce060388e97c658e748928f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-24 01:24:45 +0000