Age | Commit message (Expand) | Author |
2010-08-25 | Fix i945 based boards | Stefan Reinauer |
2010-08-24 | * Adds support for PC Engines Alix.2D(1)3 board to Coreboot. | Aurelien Guillaume |
2010-08-23 | mark unused variables in x86emu as unused. gcc has a mechanism for this. | Stefan Reinauer |
2010-08-22 | Fix up some copyrights | Wang Qing Pei |
2010-08-22 | I've checked Revision Guide for AMD Family10h processors (#41322) rev | Xavi Drudis Ferran |
2010-08-22 | RB_C3 should also apply the workaround for errata 354, according to | Xavi Drudis Ferran |
2010-08-22 | RB_C3 and HY-D0 should also apply the workaround for errata 344, according to | Xavi Drudis Ferran |
2010-08-22 | documented workaround erratum 414, see | Xavi Drudis Ferran |
2010-08-22 | documented workaround erratum 372, see | Xavi Drudis Ferran |
2010-08-22 | Complete code for errata 343. Revision Guide for AMD Family10h | Xavi Drudis Ferran |
2010-08-22 | Include RB_C3 in erratum 346 | Xavi Drudis Ferran |
2010-08-22 | Add RB_C3 to AMD_FAM10_ALL so that it gets its MSR right for mtrs, ht, etc. | Xavi Drudis Ferran |
2010-08-20 | Remove a couple of warnings. Trivial. | Myles Watson |
2010-08-20 | Add support for the HP DL145 G1, based on the Tyan s2881. | Oskar Enoksson |
2010-08-18 | The attached file add pa78vm5 dev3 detection function to avoid the building e... | Wang Qing Pei |
2010-08-17 | Attached patch removes unnecessary IRQ routing info (for ACPI, mptable etc ne... | Rudolf Marek |
2010-08-17 | Correct for size_t would be %zx, but coreboot's printf doesn't support this. | Jens Rottmann |
2010-08-17 | Commit (non-working!) Jetway PA78VM5 mainboard | Wang Qing Pei |
2010-08-17 | Support for Fintek F71863FG. This might need some work on the copyright | Wang Qing Pei |
2010-08-17 | Another AMD 780/700 mainboard: Gigabyte MA78GM-US2H | Wang Qing Pei |
2010-08-17 | Tilapila supports both dual slot and single slot. The difference should be | Wang Qing Pei |
2010-08-17 | Add support for Gigabyte MA785GMT mainboard. | Wang Qing Pei |
2010-08-17 | fix nokia ip530 Kconfig, missed on last check-in | Stefan Reinauer |
2010-08-17 | Whatever happened here,... The DEC Tulip is a network card, no bridge of any | Stefan Reinauer |
2010-08-17 | Clarify comment a bit | Patrick Georgi |
2010-08-17 | Look for actual framebuffer size instead of hardcoding UMA | Rudolf Marek |
2010-08-17 | Fix warnings (that become errors) in AMDHT for certain configurations (unused... | Xavi Drudis Ferran |
2010-08-17 | Feature of lane reversal of AMD RS780 is tested. | Zheng Bao |
2010-08-16 | White space changes for s2881 device tree. | Myles Watson |
2010-08-16 | Call mainboard init functions. | Myles Watson |
2010-08-15 | Gigabyte dual bios mainboard will always reboot, caused by the superio. | Wang Qing Pei |
2010-08-14 | My forgotten CAR cleanup patch... | Stefan Reinauer |
2010-08-14 | My old mcp55 azalia fix from May 2010. Was never checked in. | Stefan Reinauer |
2010-08-14 | bootblock_prologue.c (not a .c file!) and i386/init/crt0_prologue.inc were | Stefan Reinauer |
2010-08-14 | clean up comment in entry32.inc | Stefan Reinauer |
2010-08-13 | Build 8151 for s2885. Trivial. | Myles Watson |
2010-08-09 | make sconfig parser regeneration menu selectable | Stefan Reinauer |
2010-08-05 | The number of cores is got by reading the bit 15,13,12 of [0,24,3,e8]. | Zheng Bao |
2010-08-04 | Remove warnings from USB debug console code. | Myles Watson |
2010-08-03 | Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user / | Stefan Reinauer |
2010-08-03 | VGA code needs to be refactored before it can be compiled conditionally. | Myles Watson |
2010-08-02 | Build VGA code conditionally to avoid errors when using SeaBIOS. | Myles Watson |
2010-08-01 | make early_mtrr_init() invisible for cache as ram targets as it breaks them. | Stefan Reinauer |
2010-08-01 | Clarify a comment on an old hack, remove the call to early_mtrr_init | Corey Osgood |
2010-08-01 | - fix SMM code relocation race | Stefan Reinauer |
2010-08-01 | Update my old, no longer active email addresses | Corey Osgood |
2010-07-28 | Let Geode GX2 use geode_post_code.h just like Geode LX | Nils Jacobs |
2010-07-27 | Add src/cpu/amd/model_gx2/cache_as_ram.inc missing from r5669 | Nils Jacobs |
2010-07-26 | This patch converts the Geode GX2 boards to CAR. | Nils Jacobs |
2010-07-26 | Make include paths more consistent. Fixes compilation errors for me. | Myles Watson |
2010-07-16 | Add support for the console over Ethernet (through PCI NE2000). | Rudolf Marek |
2010-07-09 | Trivial -Werror fix. | Cristi M |
2010-07-09 | Trivial fix to make CONFIG_BOOTBLOCK_NORMAL switch compile again. | Myles Watson |
2010-07-08 | Ugly temporary fix until we figure out how to deal with the race condition. | Myles Watson |
2010-07-08 | Fix all warnings in the tree | Stefan Reinauer |
2010-07-08 | get rid of even more fam10 and k8 warnings. | Stefan Reinauer |
2010-07-07 | fix some more warnings | Stefan Reinauer |
2010-07-07 | fix some warnings. | Stefan Reinauer |
2010-07-07 | Kill a few more warnings. | Myles Watson |
2010-07-06 | Eliminate a couple of warnings from setup_resourcemap.c | Myles Watson |
2010-07-06 | Select HAVE_OPTION_TABLE for msi/ms9652_fam10. It fixes the build and doesn't | Myles Watson |
2010-07-06 | Re-integrate "USE_OPTION_TABLE" code. | Edwin Beasant |
2010-07-06 | A bug fix: | Myles Watson |
2010-06-29 | fix misnamed functions. | Stefan Reinauer |
2010-06-25 | Add new function to create all mptable entries for buses by | Patrick Georgi |
2010-06-22 | Finish fixing Tyan s2881. Simplify ADT7463 initialization code. | Myles Watson |
2010-06-21 | This patch adds support for the Intel D810E2CB (i810e/ICH2) desktop board. Hu... | Joseph Smith |
2010-06-21 | This patch adds support for the Intel D810E2CB (i810e/ICH2) desktop board. Hu... | Joseph Smith |
2010-06-21 | Create new socket for FCPGA370 and PGA370 CPU's for CAR. Add CAR support for ... | Joseph Smith |
2010-06-20 | This patch implements GFXUMA on all supported i810 boards. Also some fix-ups ... | Joseph Smith |
2010-06-19 | Trivial. Cleaning up about the blank line. | Zheng Bao |
2010-06-17 | Always enable parent resources before child resources. | Myles Watson |
2010-06-10 | Fix a missing include file that was breaking the Traverse Geos build. | Edwin Beasant |
2010-06-10 | This commit updates the Geode LX GLCP delay control setup from the v2 way to ... | Edwin Beasant |
2010-06-10 | The devicetree was wrong, but I'm still surprised it broke. This fixes the | Myles Watson |
2010-06-09 | Same conversion as with resources from static arrays to lists, except | Myles Watson |
2010-06-09 | Make k8 & fam10 northbridge.c code more similar. | Myles Watson |
2010-06-09 | The interrupt controller lives at I/O 0x4d0/0x4d1. | Stefan Reinauer |
2010-06-09 | This patch adds the ECS P6IWP-Fe board to coreboot. | Anders Jenbo |
2010-06-08 | Fix auto-mangled comments (trivial) | Patrick Georgi |
2010-06-07 | Fix some of Peter's suggestions for the Nokia IP530. | Myles Watson |
2010-06-07 | Remove the rest of cardbus_scan_bus. | Myles Watson |
2010-06-07 | cardbus_scan_bridge is identical to pci_scan_bridge | Myles Watson |
2010-06-07 | This patch extends the reserved resources for the cs5536 to avoid the excluded | Myles Watson |
2010-06-07 | Make sure VSA is linked as ELF32 for i386 (instead of whatever the compiler c... | Patrick Georgi |
2010-06-07 | replace outb -> port 0x80 with post_code() in some places. | Stefan Reinauer |
2010-06-05 | Fix two warnings: | Stefan Reinauer |
2010-06-05 | tly cosmetical. don't use movw because we use mov in most places. | Stefan Reinauer |
2010-06-04 | This patch fixes the option rom code that was buggy when it switched | Edwin Beasant |
2010-06-04 | Kconfig value is hex, not int. | Myles Watson |
2010-06-04 | 128KB is the default, and isn't large enough with the 30K payload for abuild. | Myles Watson |
2010-06-04 | Fixes for Nokia IP530 and associated drivers. | Marc Bertens |
2010-06-04 | Enable PCI_OPTION_ROM_REALMODE when GEODE_VSA is selected. | Myles Watson |
2010-06-04 | This patch replaces the headers of the following files: | Frank Vibrans |
2010-06-03 | The code was ported. Now it is what it should be. | Zheng Bao |
2010-06-02 | Fix hard-coded log levels. | Myles Watson |
2010-06-01 | Fix a format string to keep the compiler happy. | Marc Bertens |
2010-06-01 | CONFIG_DEBUG is too generic. Remove it and replace it with CONFIG_DEBUG_SMBUS | Myles Watson |
2010-06-01 | Check the value of ulzma and do not continue if there was an error. | Myles Watson |
2010-05-30 | don't generate C source code file but use objcopy to include the SMM blob. | Stefan Reinauer |