summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2018-10-23soc/amd/stoneyridge: Remove smbus.aslRichard Spiegel
The file smbus.asl has 0 bytes (no content). Now that it's no longer included, remove it. BUG=b:117814641 TEST=Build grunt and gardenia. Change-Id: I66389c721e272053d86357f71a6d1242ca767edd Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-23mb/kahlee mb/gardenia: Remove smbus.asl includeRichard Spiegel
The file soc/amd/stoneyridge/acpi/smbus.asl has 0 bytes (no content). Remove the include of this file. BUG=b:117814641 TEST=Build grunt and gardenia. Change-Id: I0c48167195a9708afc255490bb1996b6dfc7bdfb Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29178 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-23mb/google/octopus: Use a single GPIO for trackpad wake and IRQFurquan Shaikh
This change uses the newly added macros for configuring the same GPI pad(GPIO_135) for IRQ (normal interrupt operations) and wake (interrupt for waking from S3/S0ix) for the trackpad device. The other pad GPIO_142 is now configured as not connected. BUG=b:117553222 TEST=Verified that yorp and bobba wake from S3 and S0ix using trackpad. Change-Id: I2b704f1be493141629c647b79723b0025b0f7dd6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29189 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-23soc/intel/common/block/gpio: Allow GPI to be dual-routedFurquan Shaikh
This change adds new macros to GPIO common library helpers to allow a GPI pad to be dual routed using PAD_CFG_GPI_DUAL_ROUTE. It also adds a helper macro to configure a pad for IRQ and wake. Above macros are guarded using a newly added Kconfig option SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT that is selected only by SoCs that have been validated to allow dual route of GPIs. Currently, this config is selected only for APL/GLK/SKL/KBL that have been validated to work with dual-routing of GPIs for IRQ and wake. BUG=b:117553222 Change-Id: Iaa623d2d78a50f1504e3abe9a47a5a663693aead Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29188 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-23soc/intel/common/block/gpio: Configure Tx Disable in IO standby for GPIsFurquan Shaikh
This change updates various PAD_CFG_GPI* macros to configure Tx as Disabled in IO Standby state. This is done to ensure that the Tx setting is same in IO Standby state as it was in active state i.e. Tx disabled. BUG=b:17553222 Change-Id: If462aee3884cc61a519fb358b84867c695ace251 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-23acpi_device: Refine ACPI_IRQ_* macrosFurquan Shaikh
This change does the following: 1. Adds a helper macro ACPI_IRQ_CFG that can be used by all other ACPI_IRQ* macros to initialize acpi_irq structure. 2. Provides ACPI_IRQ_WAKE* versions to allow board to define an irq as wake capable. BUG=b:117553222 Change-Id: Ic53c6019527bbd270806897247f547178cd1ad3c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-23soc/intel/apollolake: Add reset code to postcar stagePatrick Georgi
Also add a test case for that, a config taken from chromiumos with some references to binaries dropped that aren't in our blobs repo (eg audio firmware). Change-Id: I411c0bacefd9345326f26db4909921dddba28237 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/29223 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-23{device,drivers}: Use 'unsigned int' to bare use of 'unsigned'Elyes HAOUAS
Change-Id: Iebb043a6fbc5803fbb7cad2f35b43917e10d09d4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28700 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-23src: Typo fix (cosmetic)Peter Lemenkov
Change-Id: I81985bd2836bdeb369587f170504a8a048ee496b Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29196 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-22mb/google/poppy/var/nocturne: Change IMX319 sensor link freqLijian Zhao
Change link frequency of IMX319 from 360Mhz to 482.4 Mhz to match the changes from kernel driver. IMX319 has two PLLs and it can be configured either single or dual. Previous driver implemente dual PLL mode, however image sensor vendor prefer single PLL mode and calculate the pixel rate became easier. So the kernel driver changed to use single pll, coreboot change will match that. Bug=b:116082248 Change-Id: Iac9a72253e0529bf2c0785fb701b7bc251bcbab5 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28736 Reviewed-by: Tomasz Figa <tfiga@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-22mb/lenovo/*/romstage: No need to specify board's model in commentsPeter Lemenkov
This is a cosmetic one. It just removes some board names from comments since these functions sometimes are very similar, so no need to add extra difference between them. Change-Id: I26b9296b402d98bcf048580da51da7bbb0c237e4 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-10-22mainboard/: Select MISSING_BOARD_RESET appropriatelyNico Huber
We didn't have a hard_reset() implementation for these boards. So select the board_reset() stub for them. Change-Id: I77651e3844632fb1a347008c96e53d23cc5a2646 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29170 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-22amdfam10: Convert to `board_reset()`Nico Huber
And here comes the mess... This just renames do_hard_reset() to do_board_reset() and keeps current behaviour. As these are never called from chipset or board code but only from common code, it's likely that their implementations are untested and not what we actually want. Also note, that sometimes implementations for rom- and ramstage differ considerably. Change-Id: Icdf55ed1a0e0294933f61749a37da2ced01da61c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29058 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-22sb/amd/*/hudson: Use CF9 resetNico Huber
Implement board_reset() as "system reset". Change-Id: I80801ba58b9d849ef5e14185510666bd312106c2 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29057 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-22sb/amd/cimx/sb[89]00: Use CF9 resetNico Huber
Implement board_reset() as "system reset". Change-Id: I2d277b0845b4e8977b68892c2e5e00d8918e063f Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29056 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-22nb/via/vx900: Use CF9 resetNico Huber
Implement board_reset() as "system reset". Change-Id: I2b68a23cdf244884104d4ed54e19d3ab347c3a3e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29055 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-22intel: Use CF9 reset (part 2)Patrick Rudolph
Make use of the common CF9 reset in SOC_INTEL_COMMON_RESET. Also implement board_reset() as a "full reset" (aka. cold reset) as that is what was used here for hard_reset(). Drop soc_reset_prepare() thereby, as it was only used for APL. Also, move the global-reset logic. We leave some comments to remind us that a system_reset() should be enough, where a full_reset() is called now (to retain current behaviour) and looks suspicious. Note, as no global_reset() is implemented for Denverton-NS, we halt there now instead of issuing a non-global reset. This seems safer; a non-global reset might result in a reset loop. Change-Id: I5e7025c3c9ea6ded18e72037412b60a1df31bd53 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-22intel: Use CF9 reset (part 1)Patrick Rudolph
Add SOUTHBRIDGE_INTEL_COMMON_RESET for all Intel platforms that used to perform a "system reset" in their hard_reset() implementation. Replace all duplicate CF9 reset implementations for these platforms. Change-Id: I8e359b0c4d5a1060edd0940d24c2f78dfed8a590 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-22arch/x86: Implement common CF9 resetNico Huber
It's very common across many x86 silicon vendors, so place it in `arch/x86/`. Change-Id: I06c27afa31e5eecfdb7093c02f703bdaabf0594c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-22soc/amd: Implement common reset APINico Huber
Add an `amdblocks` internal API and rename soft_reset() => warm_reset() hard_reset() => cold_reset() as these terms are commonly used in the surrounding code. On Stoney Ridge, make board_reset() call cold_reset() to keep current behaviour of common code calling hard_reset(). But add a TODO if this is intended. Note: Stoney Ridge is using CF9 for the actual reset but the configuration for a cold reset doesn't use the usual full reset bit but some other mechanism. Change-Id: Id33eda676d79529db759b85fa8e28386846e6fa4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-22soc/samsung/exynos5250: Convert to `board_reset()`Nico Huber
Change-Id: I2f69d9f01ac5f7e28dd98e704f3280bf62b9ce58 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-22soc/mediatek: Convert to `board_reset()`Nico Huber
Note, MT8183 didn't select HAVE_HARD_RESET before. So it might still need an update. Change-Id: Ic850f2775ada5e6e543ffb92aaa033b9209596f5 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-22soc/imgtech/pistachio: Convert to `board_reset()`Nico Huber
Change-Id: If8fc29c46e2cbc69f94ea8b6dc414a93d82ffb28 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-22soc/rockchip/rk3399: Convert to `board_reset()`Nico Huber
Change-Id: Id07e1c7fbd35393ffafda53fc7a15ec0e157d075 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-22reset: Convert individual boards to `board_reset()`Nico Huber
Change-Id: I6182da172ae2f4107a9b5d8190e4b3b10ed2f0b9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-22reset: Provide new single-function reset APINico Huber
board_reset() replaces the existing common reset API. There is no common distinction between reset types across platforms, hence, common code could never decide which one to call. Currently only hard_reset() is used by common code. We replace these calls and provide a fall-back to the current hard_reset() implemen- tation. The fall-back will be removed along with hard_reset() after the transition of all boards. Change-Id: I274a8cee9cb38226b5a0bdff6a847c74ef0b3128 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29047 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-19mb/google/octopus: Preserve MRC training data across firmware updateFurquan Shaikh
This change udpates FMAP to wrap MRC training data in RW_PRESERVE section so that we don't lose the data when performing full firmware updates on octopus. BUG=b:117882029 TEST=Verified that chromeos-firmwareupdate doing full firmware update preserves training data on octopus. Change-Id: I5adb9bfa926327057b003360150685a8b4778c8c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-19soc/lowrisc: Remove the remains of a LowRISC socPeter Lemenkov
Looks like we've got a race condition between commit ce8763fb with Change-Id I4e3e715106a1a94381a563dc4a56781c35883c2d ("mb/lowrisc: Remove the Nexys4DDR port") and commit 2e38dbe5 with Change-Id I5524732f6eb3841e43afd176644119b03b5e5e27 ("riscv: update mtime initialization"). Let's fix it. Change-Id: I03c5860b27d04b6e1d7868ba8ea7b52d1075aa6a Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29165 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-19mb/google/fizz: Provide nhlt variant APIDavid Wu
Move current NHLT configuration implementation to baseboard so that variants can leverage it or provide their own configuration. BUG=b:117066935 BRANCH=Fizz TEST=emerge-fizz coreboot Change-Id: I30d93babb6fc09e8642b3740f1f7638fa33f0ade Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28965 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-19mb/google/fizz: Provide cros_gpio variant APIDavid Wu
Add support for ChromeOS GPIO ACPI table information by providing weak implementation from the baseboard. BUG=b:117066935 BRANCH=Fizz TEST=emerge-fizz coreboot Change-Id: I2fa52c005cacdbcc322d107a3ac92d22df3f3697 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28964 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-19mb/google/fizz: Add variant API for gpioDavid Wu
Provide API for gpio table functionality. Default weak implementations are provided from the baseboard. BUG=b:117066935 BRANCH=Fizz TEST=emerge-fizz coreboot Change-Id: Iaafa8d6932bc0a37826175b15816f1b9a4f4c314 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-19mb/google/fizz: Provide baseboard and variant conceptsDavid Wu
In order to be able to share code across different fizz variants, provide the concept of baseboard and variants. New directory layout: variants/baseboard - code variants/baseboard/include/baseboard - headers variants/fizz - code variants/fizz/include/variant - headers New boards would then add themselves under their board name within "variants" directory. This is purely an organizational change. BUG=b:117066935 BRANCH=Fizz TEST=emerge-fizz coreboot CQ-DEPEND=CL:1273514 Change-Id: I28cc41681e7af88ddeba2e847dc0a4686606feb2 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-19google/grunt: Remove unused MRC regions from FMAPRaul E Rangel
I didn't change the offsets of all the other regions because I didn't want to cause all dogfood devices to lose their corp enrollment. BUG=b:117797131, b:117798830 BRANCH=none TEST=Ran autotest and made sure the tests were skipped /tmp/test_that_results_2OZ90v/results-1-firmware_CorruptRecoveryCache [ PASSED ] /tmp/test_that_results_2OZ90v/results-1-firmware_CorruptRecoveryCache TEST_NA: No RECOVERY_MRC_CACHE was found on DUT. /tmp/test_that_results_2OZ90v/results-1-firmware_CorruptRecoveryCache/firmware_CorruptRecoveryCache.normal [ PASSED ] /tmp/test_that_results_2OZ90v/results-1-firmware_CorruptRecoveryCache/firmware_CorruptRecoveryCache.normal TEST_NA: No RECOVERY_MRC_CACHE was found on DUT. Change-Id: I5cdbf4139dde80fe6e9d0045139a97841b03bc42 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/29171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-19nb/intel/nehalem: Remove unneeded whitespaceElyes HAOUAS
Change-Id: I942a054144e05a3722c3743e445a879e86021dd4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-19{cpu,drivers}/amd: Replace MTRR addresses with macrosElyes HAOUAS
Change-Id: I315c0b70c552c5dd7f640b18b913350bb88be81b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29173 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-19mb/intel/coffeelake_rvp: Add HDA controller driver support for coffee lakepraveen hodagatta pranesh
this patch adds following changes - Select config to initialize codecs in common HDA driver. - Add audio verb table for coffee lake RVP11 & RVP8. BUG: None TEST: boot to yocto linux and windows os on CFL RVP11 & RVP8. verified audio playback and record functionality over anolog audio jack & HDMI display. Change-Id: I567e317c0e9ac9f91e159866c7f896e4c101712b Signed-off-by: praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/29067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-19soc/intel/cannonlake: Enable HDA driver supportpraveen hodagatta pranesh
This patch selects common HDA driver and adds audio controller device id to enable audio on coffee lake platforms. BUG= None TEST= boot to yocto linux and windows os on CFL RVP11 & RVP8, verified audio functionalities. Change-Id: I4a60a4d7d8babcd0c14664a304ca81d47c668a6c Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/29145 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-19mb/lenovo/*/romstage: Remove explicit power-on defaultsPeter Lemenkov
Change-Id: Ib359e4039f87bb87faac040f24f70cc0988c0ea8 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-10-18src/mainboard: Remove unneeded whitespaceElyes HAOUAS
Change-Id: Ibf23f49e7864c611a3cb32a91891b6023a692e1d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28979 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-10-18mb/google/glados/variants/sentry: Remove unnneded whitespaceElyes HAOUAS
Change-Id: Ibc928dc66e00dbb40d25420fd92f6c5f8049dec1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28703 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18minnowmax: allow both 1333 and 1066 MHz memory SKUsMichał Żygowski
The E3827 and E3845 SKUs are fused at 1333MHz DDR3 speeds. Use frequency as a proxy to determine SKU. The E3805, E3815, E3825, and E3826 are all <= 1460MHz while the E3827 and E3845 are 1750MHz and 1910MHz, respectively. This will allow to boot quad-core Minnowboard Turbot especially. Change-Id: I5e57dd419b443dfa742c8812cec87274af557728 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/27989 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18tpm/tspi: clean up tpm_setup function flowJoel Kitching
Introduce two helper functions for more readable code. Use epilogue function instead of goto for error handling. BUG=None TEST=None Change-Id: Ibea44880683a301e82ee2ba049003c36fcb44eba Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/29026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-18cpu/x86/smm: Fix non-local header treated as localElyes HAOUAS
Change-Id: I15dfe0332fd87db61d692a94bf1fd5d00dfb83d4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29105 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-10-18src/{sb/intel,mb/google/auron}: Don't use device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: I564319506870f75eab58cce535d4e3535a64a993 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28642 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-10-18ec/google/chromeec: Use common MEC interfaceDuncan Laurie
Switch to using the common MEC interface instead of the Chrome EC specific code. Tested on a Chell chromebook that has a MEC based Chrome EC to ensure that the EC interface is still functional. Change-Id: Idf26e62c2843993c2df2ab8ef157b263a71a97c9 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-18ec/google/common: Add a common MEC interfaceDuncan Laurie
In order to re-use the MEC interface code in the Chrome EC driver move it to a common directory within the ec/google directory. The Chrome EC driver itself is changed to use this interface in the next commit, and future commits will introduce a new EC that also uses this interface. Change-Id: I13516b5e4c4c49f53bb998366284a26703142e2a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-18mediatek/mt8183: Add EMI init for DDR driver initHuayang Duan
Add EMI config to initialize memory. BRANCH=none TEST=Boots correctly on Kukui, and inits DRAM successfully with related patches. Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: I945181aa1c901fe78ec1f4478a928c600c1b1dea Reviewed-on: https://review.coreboot.org/28835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-10-18mediatek/mt8183: Add register definitions of DRAM controllerTristan Shieh
Add register definitions of DRAM controller. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I8b51486deab856a783b87f0b2812a991d4111020 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-10-18mb: Fix non-local header treated as localElyes HAOUAS
Change-Id: Ib39305effdb00e032ca07e6d0e0d84cdf3dcf916 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-18mb: Replace MSR addresses with macrosElyes HAOUAS
Change-Id: I020431ba8eb61f5ce256088b919c049985331d64 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-18cpu/amd: Use common AMD's MSRElyes HAOUAS
Phase 1. Due to the size of the effort, this CL is broken into several phases. Change-Id: I0236e0960cd1e79558ea50c814e1de2830aa0550 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-18console: Set default loglevel to 8 (SPEW) for CONFIG_CHROMEOSJulius Werner
CB:26053 changed coreboot's default loglevel from SPEW to DEBUG. This may be the most reasonable choice for most users that are mostly interested in the UART console. However, on Chrome OS devices the UART is disabled for production configurations anyway, and instead they rely heavily on the CBMEM console for remote debugging and bug reports. For these kinds of cases more info is almost always better, and you can't easily reproduce a remotely filed bug if you notice that you need some info that is only provided by BIOS_SPEW. On the other hand, the cost of logging extra info to the CBMEM console is pretty negligible. Therefore, let's bump the loglevel for CONFIG_CHROMEOS in particular back up to the maximum. (Unfortunately, it seems that you can't 'select' a choice option from another option, so this has to go in the console/Kconfig file.) Change-Id: I50724e3f7f8f57fdbc5846f21babc71798b21b65 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/29144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-18soc/amd/stoneyridge: Replace double defined MISC MMIO reg. 0x40Richard Spiegel
Register 0x40 of miscellaneous MMIO is double defined, with different names, which makes it confusing. Eliminate MISC_MISC_CLK_CNTL_1, and move its only bit definition to MISC_CLK_CNTL1 (which is correctly placed among MMIO registers. BUG=b:117818431 TEST=Build grunt. Change-Id: I5ca5045498b8a81943282e0d6ecfbaecbd600d19 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-10-18soc/amd/stoneyridge: Remove double defined SPI100_SPEED_CONFIGRichard Spiegel
SPI100_SPEED_CONFIG is double defined. Bits and shift definitions on the first definition are unused. Remove first definition and its associated bits and shifts. BUG=b:117818430 TEST=Build grunt. Change-Id: I8175b9a2f379b47475a71f93096f682bc56d051c Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-18soc/amd/stoneyridge: Remove double definition for wideioRichard Spiegel
WIDEIO_RANGE_ERROR and TOTAL_WIDEIO_PORTS are defined twice. Remove the definitions within MMIO definitions, as wideio is not related to MMIO. BUG=b:117814228 TEST=Build grunt. Change-Id: I370a5b387b908fe7a840eb7579d45c1a6a9ca615 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-10-18soc/amd/stoneyridge: Remove DEV_D18F4 definitionRichard Spiegel
The definition DEV_D18F4 is only used once, in file tsc_freq.c, and is the same as SOC_PM_DEV. Remove the definition, and replace its use in tsc_freq.c with SOC_PM_DEV. BUG=b:117754424 TEST=Build and boot grunt. Change-Id: I9eeeaa084e5b16280713b8b833b4faa78d277586 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-10-18soc/amd/stoneyridge: Remove double defined GPIO MMIO basesRichard Spiegel
GPIO control a mux base addresses are defined within MMIO definitions and again bellow as GPIO specific base addresses. Eliminate those outside MMIO bases. Rename them to something indicating that they are both MMIO and related to GPIO. BUG=b:117754420 TEST=Build grunt. Change-Id: I53f7cf17d6267e6f8daa650b5f864bab688dc3f0 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29156 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18amd/stoneyridge/include/soc: Re-arrange NB IOAPIC definitionsRichard Spiegel
There's no indication that they are accessed through D0F0. Add a D0F0 header and move IOAPIC definitions under it. The registers defined to be accessed through index/data pair should be indented relative to the index/data pair definition. BUG=b:117754786 TEST=Build grunt. Change-Id: If4fb6514bb13f1c944d0e1756d8d9de1f08c99f3 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29155 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18soc/amd/stoneyridge/smi.c: Prefer using '"%s...", __func__'Richard Spiegel
In function smm_setup_structures(), the function name is used in a print string. Use __func__ instead. BUG=b:117642170 TEST=Build grunt. Change-Id: Icac5ea997289ef75fb246a09715cbca4442a57f4 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29154 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18soc/amd/stoneyridge/southbridge.c: Change comparison orderRichard Spiegel
Comparison should place the constant on the right side. Southbridge.c has 6 instances where the opposite happens. Reverse the order of six comparisons to eliminate checkpatch warnings: WARNING: Comparisons should place the constant on the right side of the test BUG=b:117656929 TEST=Build grunt. Change-Id: I94f17b81f845fa94599f93c0be1144ffcb8e4165 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29153 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18soc/amd/stoneyridge: Remove "else" after a returnRichard Spiegel
File smbus_spd.c has 2 instances of if()/else where the if tests for an error condition and returns just before the "else" statement. These "else" statements are not needed. BUG=b:117648025 TEST=Build and boot grunt. Change-Id: Ie8298773ae455dbb1125420ec65df24f3c65eb44 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29152 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18drivers/intel/fsp*: Use newly added post codes for memory param prepFurquan Shaikh
This change replaces use of post codes 0x34 and 0x36 in fsp drivers to instead use POST_MEM_PREINIT_PREP_{START,END} to make it easy to search from where these post codes are generated during boot flow. Additionally, it adds POST_MEM_PREINIT_PREP_END to fsp2_0 memory_init to make it consistent with fsp1_1 memory init. Change-Id: I307ada1679f212c424e9f7ad2c9d254e24f41fd3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29151 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-18console/post_codes: Add post codes for memory param prep callbackFurquan Shaikh
This change adds two new post codes to indicate start and end of memory param preparation in callbacks to SoC/mainboard code: 1. 0x34: Start of memory preparation 2. 0x36: End of memory preparation These post codes are already used in coreboot. This change just ensures that the codes are defined in post_codes.h for easy lookup. These post codes are useful if SoC/mainboard decides to do a reset of the platform before returning back to memory initialization. Change-Id: I065518caedb7943d960a8a5c8708823b8eb3246d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-18intel/common/block: Fix issue found by klockworkJohn Zhao
src/soc/intel/common/block/pmc/pmclib.c Function acpi_get_sleep_type: Pointer ps checked for NULL may be dereferenced. BRANCH=None TEST=Built & booted Yorp board. Change-Id: I15fe39fd9f930be56d03c2ffe62fb6f17249d4b5 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/29149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-18mb/lenovo/*/romstage: Use macros instead of magic numbersPeter Lemenkov
Apparently coreboot still uses magic numbers instead of macros in some Lenovo mainboards. Let's use macros instead. Also removed FDD from l520 romstage (original value, 0x3c0c, means that FDD_LPC_EN was also enabled). Change-Id: I6468e3357f8eed434f8527a852e134380f486d9a Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/28976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-10-18soc/intel/skylake: Prevent disabling of TCONaresh G Solanki
In Skylake/Kabylake, if ACPI PM timer is disabled then TCO also gets disabled & vice versa. FSP default config for EnableTcoTimer is disabled, this caused ACPI PM timer & TCO to be disabled by FSP even when config PmTimerDisable = 0. Thus update FSPS UPD EnableTcoTimer in accordance to devicetree config PmTimerDisable. BUG=None TEST= Build for Soraka with PmTimerDisable=0 & check if TCO caused reboot after running shell command: cat >> /dev/watchdog0 Change-Id: Ia146761036c9dbaef3c02c9a7122ae3dcdef7bdd Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/29108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2018-10-18mb/lenovo/z61t: Add VBT-filePeter Lemenkov
This file was extracted directly from the vendor's firmware ver. 2.27. Change-Id: Ic2d2b259f3b535a791c9dcfdf962c03a0bab87a2 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-10-17soc/intel/cannonlake: Add CNP PCH-H gpio pin definitionspraveen hodagatta pranesh
- CNL PCH-H has 12 GPIO groups which are grouped under 5 gpio communities. - Add gpio pin definitions for CNP-H and related changes. - Add gpio device name, host software ownership reg offset for CNP-H. BUG: none TEST: build and flash, boot to windows and yocto os on both CFL RVP8 & RVP11 and verify power management, IO device functionalities work fine. Change-Id: I496ec059de125b97c646581bbd3b8bfe6ffa641e Signed-off-by: praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/28890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-17soc/intel/cannonlake: Add new cannon lake PCH-H supportpraveen hodagatta pranesh
Cannon lake PCH-H is added to support coffee lake RVP11 and coffee lake RVP8 platforms. - Add new device IDs for LPC, PCIE, PMC, I2C, UART, SMBUS, XHCI, P2SB, SRAM, AUDIO, CSE0, XDCI, SD, MCH and graphics device. - Add new device IDs to intel common code respectively. - Add CPU, LPC, GD, MCH entry to report_platform.c to identify RVP11 & RVP8. - CNL PCH-H supports 24 pcie root ports and 4 I2C controllers, hence chip.c is modified accordingly. - Add board type UserBd UPD to BOARD_TYPE_DESKTOP for both RVP11 & RVP8. BUG=None TEST=successfully boot both CFL RVP11 & RVP8, verified all the enabled devices are enumerated and cross checked devices ids in serial logs and UEFI shell. Change-Id: I4b6af88d467382250aecb4102878b1c5af92ccd4 Signed-off-by: praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/28718 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-17mb/intel/coffeelake_rvp: Add support for new coffee lake RVP8praveen hodagatta pranesh
- Add new mainboard variant coffee lake RVP8, which is CRB for coffee lake-s processor, support U-DIMM DDR4 memory module. - Modify cfl_h devicetree to enable IO devices, configure PCIE root port clock source, usb over current pin as per board schematics. - Select cannonlake PCH-H chipset config for both cfl_h & cfl_s. - Add GPIO table as per board schematics. BUG= None TEST= Build and flash, confirm boot into yocoto & windows OS on both cfl RVP11 & RVP8 platform. verified PCI, USB, ethernet, SATA, display, power functionalities. Change-Id: Iabd32eb43ee8e6b1a3993ba4e083a80c62485b14 Signed-off-by: praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/29066 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-17mb/lenovo/*/acpi: Store the requested state wake state for bluetooth and WWANPatrick Rudolph
L520 and T420 should also use it - platforms are very similar to t420s and t530. Z61t is based on T60/X60, X131e is based on X230 so commit with Change-Id I13c08b8c6b1bf0f3deb25a464b26880d8469c005 should be applied as well. All four platforms are using ec/lenovo/h8 embedded controller. Change-Id: Ib177f024871e82979dd430da86f1551aef14d446 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-17google/kukui: Configure USBTristan Shieh
Set up USB host controller. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: Iec98f3dc1bbf3dda3d28dbefad15339d48608c7e Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-10-17mediatek/mt8183: Add USB supportJumin Li
This patch implements SoC-specific defines of mt8183 and links the common code to support USB. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I1224cf24f92b07f3c1814f1cbfef96aafa5a992b Signed-off-by: Jumin Li <jumin.li@mediatek.com> Reviewed-on: https://review.coreboot.org/28787 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-17mediatek: Refactor USB code among similar SoCsTristan Shieh
Refactor USB code which will be reused among similar SoCs. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Elm Change-Id: I06fefb4149a489be991e13ddf624082d11e31765 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-17vboot: do not extend PCRs on resume from S3Joel Kitching
BUG=b:114018226,chromium:873099 TEST=compile coreboot Change-Id: I6840c45604535089fa8410f03c69702bec91218f Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/28750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-17tpm/tpm_setup: fail on invalid result from tlcl_resumeJoel Kitching
BUG=b:114018226 TEST=compile coreboot Change-Id: I8f5df2b0119d35e4000fe62bf1bba6ca07f925f3 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/28748 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-17soc/cavium/cn81xx: Drop dead do_soft_reset() implementationNico Huber
Change-Id: I85f357739220f16497f65df1bb317d9d6eb54d9f Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-10-17arch/x86/exception: Improve the readability of a commentJonathan Neuschäfer
Add punctuation and fix a typo. Change-Id: Ic61c665f7e2daefb50b478a1710ea66c8a88235a Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-10-17mb/lenovo/t530: Fix double indentation in Kconfig.nameJonathan Neuschäfer
There is no need to indent these lines with two tabs. Change-Id: I2164f4e3ea48db8dc5242a55b0452782dae19a4b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-10-17mb/*/*: Clean up FADT checksum assignmentJonathan Neuschäfer
The assignment of header->checksum was in some cases done twice, or unnecessarily split into two lines. Change-Id: Ib0c0890d7589e6a24b11e9bda10e6969c7d73c56 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-10-17mb/google/poppy/variants/nocturne: Disable pull-down of GPP_E9/E10Roy Mingi Park
While these pins were set to a pull-down 20KOhm, NPCX EC consumes ~2.1mW higher power. Becasue there was leakage current on both GPIO67 and GPIO70 from NPCX EC. With the external pull-up 10KOhm for USB_OC0#/USB2_OC1#, this wasn't enough to prevent leakage current. BUG=b:117139495 TEST=Check nxpc EC power to see power improvement Change-Id: I685d876461c263f07ca4c8f8046635cb7087279c Signed-off-by: Roy Mingi Park <roy.mingi.park@intel.com> Reviewed-on: https://review.coreboot.org/29007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-17drivers/intel/fsp2_0: Add new config option to support FSP CARpraveen hodagatta pranesh
CPU_MICROCODE_CBFS_LEN and CPU_MICROCODE_CBFS_LOC configs pass the CPU microcode length and base address in CBFS to FSPT binary as init parameters. Add new config FSP_T_XIP in Kconfig, which is selected by platform config. If FSP_T_XIP is selected, then relocate FSPT binary while adding it in CBFS so that it can be executed in place. BUG= None TEST= Build for both CFL RVP11 & RVP8 and verified for successfull CAR setup. Change-Id: Ic46e0bb9ee13c38ff322979119c4813653c61029 Signed-off-by: praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/28985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-17mb/google/poppy/variants/nocturne: Tune DPTF settings for CPUSumeet R Pawnikar
Update CPU passive temperature threshold value from 70C to 80C, to avoid early throttling for spiky workloads. Also, change CPU throttling interval from 1 sec to 5 sec for CPU temperature. BUG=b:116400298 BRANCH=None TEST=Manual performance testing on nocturne. Change-Id: Ic5031a4aa16f750237565f4e4928e78834b1d686 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/29044 Reviewed-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-by: Todd Broch <tbroch@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-16mb/*/*/Makefile.inc: Remove acpi_tables.c from MakefilesPeter Lemenkov
It always included if ACPI is supported since commit 822bc65 with Change-Id I372dbd03101030c904dab153552a1291f3b63518 ("ACPI: Remove CONFIG_GENERATE_ACPI_TABLES"). Change-Id: If17a6f43e368ccf850031b349714fa1ec4d02c1d Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/28954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-10-15mb/google/poppy/variants/nami: Disable rear camera/DMIC for SyndraAmanda Huang
Since there are two cameras on Nami and only one camera on Syndra. We need to disable rear camera/DMIC on all Syndra sku. BUG=b:112876867 Change-Id: I92fb43ec84387c268ffdb6d0d34a5e5b13bcf50a Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/29022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-15mb/lenovo/*/smihandler: Remove some unused includesPeter Lemenkov
Tried to build all affected mainboards - still compiles fine. Change-Id: I385cac1a75cee13453b831bd75b3ecc7a6d229fa Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-15mb/lenovo/*/dsdt: Remove HAVE_LCD_SCREENPeter Lemenkov
This define is no longer used by anyone. It was removed everywhere else with commit with Change-Id I556769e5e28b83e7465e3db689e26c8c0ab44757. It seems that these two files were simply mislooked. So let's remove it. Change-Id: Ifbb62441e16e97c0cae0713968844e296619a880 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29070 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-15mb/asus/p5q_pro: Add mainboardArthur Heymans
This mainboard is quite similar to the p5qc. The main differences being a second PEG slot, the IDE slot and being DDR2 only. The following was tested: - both PEG slots populated (coreboot sets legacy VGA decoding on the GPU in the black slot) - USB - Ethernet NIC - PS2 Keyboard - COM1 - S3 resume Change-Id: I49a4bca4256e2a905aff3252eca76387c81152c1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/29102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-10-15drivers/net/atl1e: Add driverArthur Heymans
A shortcoming of this driver is that if multiple devices with the same PCI ID are present and don't have an eeprom, they would all get the same macadress set. The r8168 driver deals with such cases so it should be easy to implement if needed. Change-Id: I5c32df00e25453c350a45e7f1ee6834b89c4289f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-10-15mb/asus/p5qc: Add mainboardArthur Heymans
SeaBIOS does not seem to like the Marvel IDE controller, so disabled SeaBIOS support for ATA. It works fine in Linux afterwards. Working: - SATA on southbridge port - SATA on marvel IDE controller ports (only in Linux) - USB - COM1 - PS2 Keyboard - DDR2 DIMMs - PCIe x16 PEG port - PCI port - NIC (needs a driver to set macaddress) - S3 resume Not working: - SeaBIOS with ATA support (long timeout marvel controller so disabled) - DDR3 fails because the proper clock signal does not get enabled. Even when fixing this it fails later or during memtest, so it should be considered unsupported for now Untested: - PCIe x1 ports (expected to work) - sound (expected to work) TODO: add documentation Change-Id: I4a81940707566776bd048904ca1387fea741fece Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28264 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-10-15vc/google/chromeos/ec: remove EC hibernate in cr50 update pathAaron Durbin
More platforms are not able to hibernate under certain circumstances, such as when AC is plugged. This original path was conservatively put in to prevent potential damage when cr50-update-caused asynchronous resets occur. Julius' compelling argument that async resets from recovery mode requests should have enough coverage of the design over the course of project development. Remove the hibernate path and assume all is well going forward. Change-Id: I37121e75ff4e6abcb41d8534a1eccf0788ce2ea2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/29076 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-15nb/intel/x4x: Fix P45 CAPID max frequencyArthur Heymans
It looks like on the ASUS P5QC has 0 in this CAPID field while still supporting TCK_666MHZ. Change-Id: Id1a94d91434dbe782fcc56dad56fcaee4e78463b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/29101 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-10-15sb/intel/i82801jx: Use macros for LPC_ENArthur Heymans
Change-Id: I4a9a9366c85206fa460519a26f48b3aada5bc7c3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/29100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-10-15nb/intel/x4x: Program read training results to all ranksArthur Heymans
While during the read training itself only the settings for rank 0 are used for all ranks, the controller does use the separate settings for each rank later on. It is unknown which register is responsible for this. The signals are probably not generated separately and therefore need to have the same settings for all ranks. Therefore program the results for all ranks instead of for all populated ranks. TESTED: Fixes DG43GT not booting with only the second DIMM slot of a channel populated. Change-Id: I7965a068ef4779847e62e966154764370c91302a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28577 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-10-14soc/amd/stoneyridge: Define PM USB Enable registerMarshall Dawson
Make #define definitions for PMxEF and replace the hardcoded values. Note that this doesn't change the current functionality of the source. The existing code has been propogated from the sb//hudson port, which seems to attempt to enable 100% of all OHCI and EHCI controllers that may be present in the system. Change-Id: I6018b0062730de19e3283a010144dfedc2b11423 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29075 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-14soc/amd/stoneyridge: Remove hudson EHCI debug controllersMarshall Dawson
Remove nonpreset controllers from the PCI device identifier function (ignoring any CONFIG_USBDEBUG_HCD_INDEX). The extra devices appear to be holdovers from the original sb/hudson source. TEST=Jam Makefile.inc to unconditionally build enable_usbdebug.c and verify proper BDF is returned in romstage and ramstage. Change-Id: I2e819d5e998922ad427c4a094c29a590f249a0d3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-14soc/amd/stoneyridge: Remove errant parenthesis in southbridge.hMarshall Dawson
Delete an unmatched opening parenthesis in the definition for the EHCI hub config register definition. This wasn't causing a problem unless EHCI debug was enabled. TEST=Jam Makefile.inc to unconditionally build enable_usbdebug.c and verify successful build Change-Id: I5f461d1573e416b5a8ee24329142e3c46b6a05e3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29073 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-14soc/amd/stoneyridge: Rearrange southbridge.h moreMarshall Dawson
Move the SPI base address register definition to D14F3. This was missed in: bba043 amd/stoneyridge: Rearrange southbridge.h Change-Id: Ia722339418c118bdf4b000bbf97ae4266e9b3be2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-12drivers/intel/fsp2_0: Hook up IntelFSP repoPatrick Georgi
With https://github.com/IntelFsp/FSP/pull/4 merged, this allows using Intel's FSP repo (that we mirror) to build a complete BIOS ifd region with a simple coreboot build, automatically drawing in headers and binaries. This commit covers Apollolake, Coffeelake, Skylake, and Kabylake. Skylake is using Kabylake's FSP since its own is FSP 1.1 and Kabylake's also supports Skylake. Another candidate (given 3rdparty/fsp's content) is Denverton NS, but it requires changes to coreboot's FSP bindings to become compatible. Cannonlake, Whiskeylake require an FSP release. Change-Id: I8d838ca6555348ce877f54e95907e9fdf6b9f2e7 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28593 Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-12libpayload: arm64: Conform to new coreboot lib_helpers.h and assume EL2Julius Werner
This patch adds the new, faster architectural register accessors to libpayload that were already added to coreboot in CB:27881. It also hardcodes the assumption that coreboot payloads run at EL2, which has already been hardcoded in coreboot with CB:27880 (see rationale there). This means we can drop all the read_current/write_current stuff which added a lot of unnecessary helpers to check the current exception level. This patch breaks payloads that used read_current/write_current accessors, but it seems unlikely that many payloads deal with this stuff anyway, and it should be a trivial fix (just replace them with the respective _el2 versions). Also add accessors for a couple of more registers that are required to enable debug mode while I'm here. Change-Id: Ic9dfa48411f3805747613f03611f8a134a51cc46 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/29017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 06:15:24 +0000