summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2017-08-08rx6110sa: Make sure that VLF bit will be clearedWerner Zeh
Ensure that the VLF bit will be cleared after a power loss event even if the stopwatch has expired before the code to clear the bit is reached. Change-Id: Ib2cfdabf4cd4df834395d6a102c6ae70568e71db Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/20893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2017-08-08mb/lenovo/l520/Kconfig: Remove hybrid graphics driver supportPatrick Rudolph
The schematics isn't available for the board, but other L*00 series boards seem to use a different, compared to T*00 series, GPIO layout. As it has never been tested, remove the broken driver. Change-Id: I4bfa02fdbc5da5b556010c2f300faaf6dc845b80 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-08mb/intel/d510mo: Configure clockgenArthur Heymans
Configuring the clockgen like vendor bios fixes the issue where the display wobbles from left to right on the analog VGA output. Note: This seems to be common issue/requirement on Intel devices from that generation (also happens on dg43gt). TESTED on Intel D510MO. Change-Id: I08449f0b8b90a1781e6dec91140bf219ea07aaf9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19595 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-07soc/intel/braswell: Fix SPI write after FLOCKDN is setHannah Williams
The SPI controller initialization in finalize_chipset was failing because FSP was setting FLOCKDN before finalize_chipset was called. Hence move finalize_chipset to get called from BS_POST_DEVICE so that it is called before FSP notify function-Ready To Boot state. TEST: run flashrom with -VVV and observe supported opcodes and SPI flash chip are reported correctly, and write/erase operations succeeed. Original-Change-Id: I3c0297f3f2258cf77cf00db367f11ff4d1d9dc77 Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I690fb4bf9e78bb58811c704179ba8b8f25ce95cc Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/20891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07soc/intel/cannonlake: Add memory map supportLijian Zhao
Calculate the top of ram from output of Fsp reserved memory range. Change-Id: I0dcc8f737c5811c9010cc4a20ea0126ab3f90f14 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-07nb/intel/*/gma.c: Use macros for GMBUS numbersArthur Heymans
Change-Id: I885b6bd9f5be6b4e3696a530016123a3e81c4b10 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-07usbdebug: Force EHCI to D0 stateKyösti Mälkki
When resuming from ACPI S3 suspend, EHCI controller may be in D3 power-management state. Bring it to D0 early so it is functional for console. NOTE: D3hot->D0 transition was observed to reset previous programming of PCI_COMMAND register. Change-Id: Id177ce61926beb057fe67ba42a306d8e565d2657 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20827 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-08-07usbdebug: Refactor early enableKyösti Mälkki
Always sanity check for EHCI class device and move PCI function power enablement up. Change-Id: I1eebe813fbb420738af2d572178213fc660f392a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-07usbdebug: Consolidate EHCI_BAR setupKyösti Mälkki
There is assumption of static EHCI_BAR_INDEX, try to clean it up by bringing BAR programming at one spot. Change-Id: Ie16090536ac5470c24720a54813015250ae2d0dd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-08-07usbdebug: Remove redundant setupKyösti Mälkki
Taking ownership is handled with DBGP_OWNER within usbdebug driver code. Change-Id: Ia5da10d385cda1b4968f812967ea8a54d7e3c974 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Guckian <david.guckian@intel.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-08-07sb/intel/i82801jx: Add romstage smbus and i2c block operationsArthur Heymans
Change-Id: I76bf1ed392d3d18059792106fc482d2259a3f084 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-06sb/intel/i82801gx: Implement smbus block r/w functionsArthur Heymans
Uses common hardware access functions to make smbus block read and write available in romstage. Those are needed to reconfigure the clockgen on smbus offset 0x69, which is sometimes needed for things like CPU C-states or analog display out to work properly. Change-Id: I0a06178d2474ce65972de157cb437b42f3354da0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Damien Zammit <damien@zamaudio.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-06sb/intel/*: Use common SMBus functionsArthur Heymans
All Intel southbridges implement the same SMBus functions. This patch replaces all these similar and mostly identical implementations with a common file. This also makes i2c block read available to all those southbridges. If the northbridge has to read a lot of SPD bytes sequentially, using this function can reduce the time being spent to read SPD five-fold. Change-Id: I93bb186e04e8c32dff04fc1abe4b5ecbc4c9c962 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-06sio/smsc/kbc1100: Fix some style issuesArthur Heymans
This fixes indentation and whitespaces before opening parentheses. Change-Id: I8940f712c0161419ee0c383b7bc9eb581967366e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-08-06rockchip: gpio: Correct rk3399 pmu gpio pull settingLin Huang
Starting with RK3399, PMUGPIO pull registers use the same write mask format as normal GRF registers, so they need to use RK_CLRSETBITS() rather than clrsetbits_le32(). BRANCH=None BUG=None TEST=boot from scarlet Change-Id: Ibe391273d58ab35df993e149187d67497fcf2acc Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/20871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-08-06rockchip: gpio: add gpio_pull argument in gpio_input_irq() functionLin Huang
some gpio irq need to set input pull initialization status to guarantee to get the right irq trigger. let's add this argument in gpio_input_irq() function BRANCH=None BUG=None TEST=boot from bob Change-Id: I9b8e6497f07146dafdb447a6ea10d039a2a2fa33 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/20866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-08-04soc/intel/common: Add lpss.c to ramstageFurquan Shaikh
BUG=b:64030366 Change-Id: I7e05d65ebb3b6499451242521ffc61fc4c952830 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-04drivers/uart: Use baudrate of 115200 by defaultFurquan Shaikh
If TTYS0_BAUD is not configured, then by default use baudrate of 115200. BUG=b:64030366 Change-Id: Ida4c7ae77aba5dfd4ec331e22a54ce43a91bde00 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-04AGESA f15 f15tn f16kb: Add extra checks for incorrect SPD dataKonstantin Aladyshev
Make DMI data calculation fail-safe to incorrect SPD data. Change-Id: Ica92850cc77e1f7cbf3e7e44717de42a03b93bbe Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Reviewed-on: https://review.coreboot.org/20839 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-04mainboard/google/poppy: Decrease link-frequencies for OV13858 and OV5670V Sowmya
Decrease the link-frequencies as recommended by Omnivision for OV13858 and OV5670 camera sensors. BUG=b:38326541 BRANCH=none TEST=Build and boot soraka. Dump and verify that the generated DSDT table has the required entries. Verified that sensor probe is successful. Change-Id: I78fb2d3527f66b5147123a9c8fc4cb95650f86b6 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
2017-08-04mainboard/google/soraka: Configure GPP_B8 in bootblockFurquan Shaikh
GPP_B8 acts as input to the inverter whose output controls PERST# signal to wifi module. Out of reset, GPP_B8 is configured as input by default. Since there is no external pull-down on it, this line is floating and results in PERST# being asserted until ramstage where the GPIO was originally configured. Because of this the wifi chip is not ready during the PCIe initialization step. Move the configuration of GPP_B8 to bootblock so that wifi device is taken out of reset as early as possible. BUG=b:64181150,b:62726961 TEST=Verified with warm reboot and suspend-resume stress test that wifi is still functional. Change-Id: I68e1bd67499262a17daade72e9a9fd32934a184d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20869 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-04mainboard/google/soraka: Add gpio.c to bootblockFurquan Shaikh
Add gpio.c to bootblock so that the variant early_gpio_table can be used for configuration in bootblock. BUG=b:64181150,b:62726961 Change-Id: I77181334257f2fd19982ecafc1f58afe912f4280 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-04southbridge/pi/hudson: Fix GPIO bank1 control definitionMarshall Dawson
Change-Id: I3ef3ea3ea22faa0152d99923da2e57517ab3d0be Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-04soc/intel/common: Add Cannonlake pci ids for commonLijian Zhao
Add Cannonlake pci device ids for all the merged intel common code. As of now only have CNL-U and CNL-Y pci ids. Change-Id: Iee5087cdeba53919d83ff665d0c417075279294c Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/20823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-08-04google/kahlee: Add ChromeOS SMBIOS Board IDMarc Jones
Kahlee uses 3 GPIO(144, 140, 135) pins to identify the board revision. Change-Id: Ia9693db6d6506af7ff40db0b3ce4cc6c1469f6ef Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-04soc/amd/stoneyridge: Use generic gpio libraryMarc Jones
Use the genric GPIO library. Add the required functions. Also, update the Kahlee mainboard dependency to match. Change-Id: I2ea562b052401efff3101f736788ca77d21e6de6 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20543 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-04lib/cbmem: provide optional cbmem top initialization hookAaron Durbin
Provide a hook to allow an optional one-time cbmem_top() initialization. The new function, cbmem_top_init(), is called on the first expected initialization of cbmem based on the Kconfig options LATE_CBMEM_INIT and EARLY_CBMEM_INIT. Change-Id: I89edd2d11f226217c8e2aaca829b4f375a2cff28 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/20847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-03lib/cbmem: use globals for non CAR global migration platformsAaron Durbin
For CAR platforms which don't migrate globals real globals can be directly used. This alleviates the need to peform partial recovery on every cbmem access which in turn acts like all non-CAR platforms or any stages which execute entirely out of RAM. Change-Id: I31c08dd6473324424d5d42fe6b56d42fe635929e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-03soc/intel/apollolake: Skip disabled IGD deviceSubrata Banik
If IGD PCI device is disabled: 1. BAR for the device will be 0. 2. There is no need to allocate framebuffer for this device. Some early SOCs don't have GFX model fuse by default hence we need to add a check to ensure PCI device is enable. This code to avoid die inside coreboot for missing resources. Change-Id: Ied677e8c77fa7b166b016da458caad0e4702b5d8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-03soc/intel/skylake: Skip disabled IGD deviceSubrata Banik
If IGD PCI device is disabled: 1. BAR for the device will be 0. 2. There is no need to allocate framebuffer for this device. Some early SOCs don't have GFX model fuse by default hence we need to add a check to ensure PCI device is enable. This code to avoid die inside coreboot for missing resources. Change-Id: Ic31d3e57ba730f6b569bf2cc3bdc54cb369b8caf Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-03soc/intel/cannonlake: Sort Kconfig for CannonlakeLijian Zhao
Look and feel update, sort the sequence in Kconfig. Change-Id: I41d99979d9c7d081086aac8bfef27186b37a6e70 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/20828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-03soc/intel/braswell/Kconfig: select RELOCATABLE_RAMSTAGEMatt DeVillier
Without RELOCATABLE_RAMSTAGE selected, S3 resume will hang under Linux and Windows. All other Intel SoCs have this selected by default, so this change simply corrects an omission on Braswell. TEST: boot Linux on google/cyan with and without RELOCATABLE_RAMSTAGE selected; observe that S3 resume fails without and succeeds with. Change-Id: I9071d9b4e3e3a156281d95fae059947c4c26f744 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/20819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-03google/kahlee: Add Realtek audio codec ASLIvy Jian
Add the RT5650 codec ASL for proper Linux driver loading. Devices visible to OS: /sys/bus/acpi/devices/AMDI1002:00 /sys/bus/acpi/devices/I2SC1002:00 Change-Id: I60b256f68372c9d17d67c9cb2accaca616a0b9a5 Signed-off-by: Ivy Jian <ivy_jian@compal.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-03intel/bd82x6x: Replace magic IOBP constants with known namesFelix Held
IOBP (I/O Buffer Programming) is an interface (indirect addresses space) in the RCBA that is used to configure the high speed serial lanes on the PCH, that are used for PCIe, USB3 and SATA. This patch replaces the offsets in RCBA with the defines from pch.h, gives the access functions and their parameters useful names and replaces two magic addresses in IOBP space with their defines. Change-Id: I91a828ed076ca10733b47db876fabf5adaa63638 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/16214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-03lib/cbmem: remove cbmem_region_used()Aaron Durbin
The cbmem_region_used() function wasn't being utilized outside this module. Threfore, reduce the surface area. Change-Id: I28a9d02221048ab0aa4cd3d986d17ee7692ce636 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-03lib/imd_cbmem: remove unused #includeAaron Durbin
Change-Id: I18a08faa5f9f5330cdb509c27a8ab7a3aa8e5b73 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-03lib/imd_cbmem: remove unused funcitonAaron Durbin
The cbmem_fail_recovery() function was no longer used. I'm not sure why the compiler never complained. Regardless, delete it. Change-Id: I7d94118068064c61252d1b5ca9d8e92658a699e0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-02soc/nvidia/tegra*: force using our headers instead of compiler's/system'sPatrick Georgi
The code doesn't include much, but when compiled outside the coreboot build (what the shipped Makefile is made for), we want to make sure that the few files it includes are controlled by us. TEST=`cd src/soc/nvidia/tegra124/lp0; make CC=arm-eabi-gcc` works Change-Id: Ic2f1e4aa4047617b048ef7ef98d71f9d540ccd74 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/20860 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-02AGESA: Correct PCI function number for MEM_GET(SET)REG outputsKonstantin Aladyshev
PCI function number takes only 3 bits, therefore correct bitmask for it is 0x7. Change-Id: Id41700be0474eecc4d5b5173c4d5686c421735e3 Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Reviewed-on: https://review.coreboot.org/20837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-02AGESA f15: Support DMI generation for Opteron 63XX familyKonstantin Aladyshev
Add support of DMI tables for AMD Opteron 6300 Series Processors. Correct value for CPU family is taken from SMBIOS reference specification. Change-Id: I8c5d487c0f45f61deb081be50c6701a42fbf9111 Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Reviewed-on: https://review.coreboot.org/20838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-02binaryPI: Introduce BINARYPI_LEGACY_WRAPPER and its counterpartKyösti Mälkki
We define BINARYPI_LEGACY_WRAPPER a method of calling AGESA via functions in agesawrapper.c file. The approach implemented there makes it very inconvenient to do board-specific customisation or present common platform-specific features. Seems like it also causes assertion errors on AGESA side. The flag is applied here to all boards and then individually removed one at a time, as things get tested. New method is not to call AGESA internal functions directly, but via the dispatcher. AGESA call parameters are routed to hooks in both platform and board -directories, to allow for easy capture or modification as needed. For each AGESA dispatcher call made, eventlog entries are replayed to the console log. Also relocations of AGESA heap that took place are recorded. New method is expected to be compatible with binaryPI. Change-Id: I2900249e60f21a13dc231f4a8a04835e090109d5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-02binaryPI: Add dispatcher for PI blobKyösti Mälkki
Change-Id: I622d155fce3fa56cd5e24282e22de060fed560c3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-02AGESA f15tn f16kb: Implement common FCH calloutKyösti Mälkki
This FCH_OEM_CALLOUT bypasses API and uses structures that are private to AGESA. Attempt to clean it up by first clarifying when it is used. Change-Id: I63aa0f586f73e97d615b8596d73728edbaeb0a2d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19179 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-02binaryPI: Enable RELOCATABLE_RAMSTAGEKyösti Mälkki
Change-Id: I0c0058be002e409bd16d2d75fd404df94407df4e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-02binaryPI: Enable EARLY_CBMEM_INITKyösti Mälkki
Also moves postcar stack to CBMEM. Change-Id: I0263af9561e0367bbbde4d5c3190039f4c3047a0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19347 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-08-02AGESA: Conditionally enable RELOCATABLE_RAMSTAGEKyösti Mälkki
Change-Id: Id199322db077fc5f112dfa45f8e9f72b9142a8fb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-02AGESA: Add romstage timestampsKyösti Mälkki
Experiments on f14 f15tn and 16kb suggest that TSC counter value shifts at end of raminit. To account for this all previously stored values in timestamp table are also divided by 4. Change-Id: I47584997bf456e35cf0aeb97ef255748745c30ee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-02AGESA: Implement EARLY_CBMEM_INITKyösti Mälkki
Boards without AGESA_LEGACY_WRAPPER gain EARLY_CBMEM_INIT. This does not apply to family12 and family14 just yet, as they do invalidate without write-back on CAR teardown. Change-Id: I008356efa2bc3df0ed1f0720e225ecc7e9995127 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-02AGESA: Split dispatcher to stagesKyösti Mälkki
Change-Id: Ide49e46c0b6aa5e1bf09354435a847a46bc797c9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-02AGESA: Move romstage-ramstage splitlineKyösti Mälkki
In AGESA specification AmdInitEnv() is to be called once host memory allocator has started. In coreboot context this could mean either availability of CBMEM or malloc heap. As for AmdS3LateRestore(), there is no requirement to have it run as part of the romstage either. Change-Id: Icc8d97b82df89e2480e601d5c2e094de0365b0a5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-02AGESA binaryPI: Unify agesawrapper headerKyösti Mälkki
Change-Id: I54c8553bc057798e595b28f6cbc07f7125ae074f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-02AGESA: Consolidate platform_once() callKyösti Mälkki
Change-Id: I13d8df330db925b2eced7c123ca9926fb259646d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20621 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-08-02AGESA: Consolidate early_all_cores() callKyösti Mälkki
Change-Id: I7c3af493b9189bb75a58eb322646694b5a712745 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-02AGESA: Introduce AGESA_LEGACY_WRAPPER and its counterpartKyösti Mälkki
We define AGESA_LEGACY_WRAPPER a method of calling AGESA via functions in agesawrapper.c file. The approach implemented there makes it very inconvenient to do board-specific customisation or present common platform-specific features. Seems like it also causes assertion errors on AGESA side. The flag is applied here to all boards and then individually removed one at a time, as things get tested. New method is not to call AGESA internal functions directly, but via the dispatcher. AGESA call parameters are routed to hooks in both platform and board -directories, to allow for easy capture or modification as needed. For each AGESA dispatcher call made, eventlog entries are replayed to the console log. Also relocations of AGESA heap that took place are recorded. New method is expected to be compatible with binaryPI. Change-Id: Iac3d7f8b0354e9f02c2625576f36fe06b05eb4ce Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-02AGESA: Move agesawrapper_laterunaptask()Kyösti Mälkki
Change-Id: I916d808d1b2ecc4b70b5dfebff62c4a18119f157 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-02AGESA: Refactor eventlog read loopKyösti Mälkki
Also avoid infinite loop. Change-Id: I7571f9efdc2bf0335788136b8c56e9290581d748 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-02AGESA: Use common handler for ACPI tablesKyösti Mälkki
Change-Id: I2d6ab1026f1105f1fea97682442a169409248c39 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-02AGESA: Sync ACPI table definitionsKyösti Mälkki
Change-Id: I09b094b3f129ac3e32608bcbe56f4b3f90c8946b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20762 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-01src/northbridge: Add guards on all header filesMartin Roth
Change-Id: I93b939478615f22f2c078b1efb7999ad4f3a4c28 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20747 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-08-01src/device: Add guards on all header filesMartin Roth
Change-Id: I8641f32ed2221f1d6e6dac884912251f64424f4d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-08-01src/acpi: Add guards on all header filesMartin Roth
Change-Id: I1b2d82a85194df6660bc041af8a690acc5469d02 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-08-01src/include: Add guards on all header filesMartin Roth
Change-Id: I2d7d4e0b25f2cf3eef2040f89d5ebc711909cdd7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-08-01src/cpu/amd/quadcore: Fix checkpatch errors/warningsEvelyn Huang
Fix over 80 character line warnings, unncessary braces for single statement blocks warnings, include space before and after =, <, > warnings, spaces after open parantheses warnings Change-Id: Ib0a28c12e209547b3625f4ca1696f9c26dc2b6d0 Signed-off-by: Evelyn Huang <evhuang@google.com> Reviewed-on: https://review.coreboot.org/19987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-08-01cpu/amd/pi: Fix checkpatch warnings and errorsEvelyn Huang
Fix remaining space prohibited between function name and open parenthesis, line over 80 characters, unnecessary braces for single statement blocks, space required before open brace errors and warnings in subdirectories of src/cpu/amd/pi Change-Id: I177ffe98a3674bd700a39eb8073db34adf9499b4 Signed-off-by: Evelyn Huang <evhuang@google.com> Reviewed-on: https://review.coreboot.org/20098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-08-01google/gru: Correct Scarlet pwm regulator minimum value and maximum valueLin Huang
In Scarlet pwm regulatoror minimum value and maximum value differs from other board variants, Correct it so we can get the right voltage. Change-Id: I1f722eabb697b3438d9f4aa29c205b0161eb442a Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/20831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-08-01google/gru: Correct the Sdcard control gpio setting for ScarletLin Huang
in Scarlet the Sdcard control gpio differs from other board variants, So set the GPIO to high on Scarlet. Change-Id: I5fa19b212a716213462eea58b6242392d32a2c5c Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/20803 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-01google/gru: Use 1.8V powerdomain for gpio4cd on ScarletLin Huang
Scarlet gpio4cd use 1.8V powerdomain, let's make a correct register setting, otherwise even the uart does not work. Change-Id: Ib5a8b2a4d92502fb829688d0a3e1b645d53cd7fc Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/20802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-08-01soc/dmp/vortex86: Fix CMOS read and random RTC resetMartin Roth
The array of CMOS values that was passed into the read routine was never getting updated. GCC 7.1 gives a warning on this: error: may be used uninitialized in this function Change-Id: I2f7c9b6455761a38598467b001efb0603fd14c32 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-07-31google/kahlee: Add mainboard GPIOs to ACPIMarc Jones
Add the Google mainboard GPIOs to the ACPI table. Change-Id: I9b5952ed3934b938cb50650890a7b434e6306fd1 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Fix CTRL+U USB bootMarc Jones
The EC KBC controller was not initialized, so the EC wouldn't put keys in the output buffer. With nothing in the buffer, vboot didn't try to boot the USB stick. Add the driver to setup the KBC called by EC init. BUG=b:62066405 BRANCH=none TEST=Boot Kahlee with USB stick and CTRL+U boots the stick. Change-Id: If9346fda558e802536c7de38da5b21fd25320e40 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20480 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-31google/kahlee: Move mainboard_ec_init to chip init phaseMarc Jones
Move mainboard_ec_init out of mainboard enable to the more appropriate mainboard init phase. Change-Id: Ieabcecf70e4de0b42fc639d031755b6d0b66f08a Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31soc/amd/stoneyridge: Add GPIO functions to romstageMarc Jones
A mainboard may access GPIO in romstage. Change-Id: Id380c6570943ce2a0bf6112d62cc91aeae283fcf Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20310 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31soc/amd/stoneyridge: Fix GPIO bank1 control definitionMarshall Dawson
Change-Id: Ia6c7357ba0c581dc46d173f462efce181847a4e1 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20526 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-31soc/amd/stoneyridge: Move ACPI MADT table to socMarc Jones
Move the mainboard MADT tables to generic soc ACPI code. Change-Id: I49fb55b1315da8fe65421b43fc4312ed588d5ecb Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20277 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-31google/kahlee: Add EC and GNVS ACPIMarc Jones
Add ACPI support for the Google EC, which requires GNVS support for passing information from the EC to firmware and OS. Change-Id: I0a308bcd608a135cc9633273a05527f020b60743 Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/20276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31soc/amd/stoneyridge: Add GNVSMarc Jones
Add ACPI asl for global non-volatile storage (GNVS). Change-Id: I9ecab92181bfe60e7b6c6e91ffb9fa843345352f Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/20275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Enable TPMMarc Jones
Set up the TPM decode to SPI prior to verstage. Enable LPC TPM and remove the mock data. Note, Kahlee TPM is on SPI, but decoded by the LPC block. BRANCH=none BUG=b:62103024 TEST=coreboot and Depthcharge reports TPM found. Change-Id: Iab92259ebeaa40937309fad05cc45d9ca6d41357 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Save VBNV data to CMOSMarc Jones
Store VBOOT NV data in CMOS. This allows VBOOT to save flags and data to be used in multiple stages and depthcharge. Fixes developer mode USB boot. Change-Id: I50b45e687a1a1c71838bcc390212b28d7e634a19 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Set DDI port 2 to DPMarshall Dawson
Set DDI port 2 type to Display Port. Change-Id: Idc5e57e01d4f0073ac50533c1b04a95bcae67473 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Setup the I2S audio codecMarshall Dawson
Inform AGESA to setup an I2S codec instead of an Azalia codec. This is step one for audio to work. ASL to connect the driver and the hardware is in a follow-on patch. Change-Id: I7ece5d8c317ddc76e0e6b2a005256bc384fe51e2 Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/19841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-31sb/intel/fspi89xx: Fix timestamp codeMartin Roth
The save_timestamp_to_cmos code was used at Sage before the early cbmem was available. Update it to use the standard timestamp calls, based on the rangeley implementation. Change-Id: I9a3a6609bdc8d03c4b86951daa1cafddd9c1332e Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-07-30intel/sandybridge: Clean VGA BIOS ids up a littleNico Huber
Sync map_oprom_vendev() and autoport with the list of PCI ids in the `gma.c` driver, remove one obsolete Kconfig default override. Change-Id: I12f24f415b695c516fbb947114e09c873af2e439 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-07-30intel/sandybridge: Gather MMCONF_BASE_ADDRESS defaultsNico Huber
All affected boards did the same USE_NATIVE_RAMINIT distinction or actually selected USE_NATIVE_RAMINIT. Also update autoport. Change-Id: I924c43cec1e36e84db40e4b8e1dd0e05cad2b978 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20813 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-07-30lib/program.ld: Guard .id section placementNico Huber
For x86, we place the .id section at 4GiB - CONFIG_ID_SECTION_OFFSET. To take effect, we have to guard the conflicting default placement in `program.ld`. Also, as we only include the .id section into the boot- block, guard it by ENV_BOOTBLOCK too. Change-Id: Idc7cbd670ce4f75b7790ff8d95578683e355ba7e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20810 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2017-07-29Expose Kconfig boolean for AGESA or binaryPIKyösti Mälkki
Change-Id: I8d9097100eee68a67091342161d169929c1a74dd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20696 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-29binaryPI: Drop remains of ACPI S3 on FCHKyösti Mälkki
Never reached and actual code was already wiped out. Change-Id: Ic17cbc56e83d23e228e23578357843ac9cd77eda Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20623 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-28soc/intel/apollolake: Add CNVI and PCIE IRQs for GLKHannah Williams
Change-Id: I0387ccf6970e6169cbebd232ae210731338d0900 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/20755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-28driver/intel/wifi: Update wifi wake source in elogNaresh G Solanki
In S3 resume, wifi is one of the wake sources. If elog is enabled in config, then log wifi wakes in elog. BUG=b:36992859 TEST= Build for Soraka. Do WoWlan during S3. Verify elog having update on wake due to Wifi. Change-Id: I7d42c5c81e0a3f7a3f94c3f6b7d2ebdf029d1aff Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/20455 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-28src/drivers: Fix checkpatch warning: no spaces at the start of a lineMartin Roth
This excludes files which are mostly spaces, which I felt should be handled separately. Change-Id: I33043a3090e2fc6e9d2fd81e8a5e46fb6cb0aa35 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-07-28src/cpu: Fix checkpatch warning: no spaces at the start of a lineMartin Roth
Change-Id: Iabdaaaee49e8c5cead304cda66412aa36a2ffd19 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-07-28soc/intel/skylake: Remove incorrect ME PG-status printBarnali Sarkar
As per discussion with CSME team, ME is NOT using PCI Config Space register HFSTS2 Bit 10 to update ME power-gated status. ME goes to CM0-PG state after ME device becomes idle after Bit 2 of MMIO register offset 0x800 (D0i3 Control - HECI1_D0I3C) is being set. And to retrieve the PG status of ME, one should read from the PWRMBASE+offset 0x590 (which should give the value 0xF9) and PWRMBASE+offset 0x594 (which should give the value 0xFF). But, also it needs some time for the ME FW to go to idle state and reflect these values in PWRMBASE registers after D0i3 bit is being set. This does not happen instantly. So, in coreboot, if we read the ME PG state in finalize.c, which happens just after FSP Notify phase, where actually ME D0i3 bit is set, we do not read the correct PG state values (i.e, 0xF9 and 0xFF). But, once it boots to Kernel, if we read those same registers through iotool mmio_read32 command, we get correct values. So, removing the ME PG state prints from coreboot, since it is actually showing wrong information, although ME Power Gating is successful. Change-Id: Idd31a9803b4c9db7d4bb8bbec5374583a8df0c41 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-28siemens/nc_fpga: Add support for lowest FAN speed to FAN controllerWerner Zeh
The functionality of the FAN controller is extended to provide a lowest startup speed of the FAN. Add the parameter "fanmin" to the fan_ctrl_t structure and initialize the value. Change-Id: Ib2e093ed6f5fc29bbea879779eb4777eb371b937 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/20789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-28vendorcode/siemens: Fix typo in hwilibWerner Zeh
The parameter shall be FANStartSpeed instead of FANStartpeed. Change-Id: I977da687ba8d9d0bad4c184cd0945ecaa52286ad Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/20788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-28google/kahlee: Add ASL for Elan touchpadIvy Jian
Add ASL for the Elan touchpad driver connection in ChromeOS. This is based on the Auron and Rambi ASL. The AMD ACPI code doesn't have the auto table generation the newer Intel Chrome SOC use. Device visible to OS: /sys/bus/acpi/devices/ELAN0000 Change-Id: Id3fc8c8855b0296f43a502e81143498d663468ec Signed-off-by: Ivy Jian <ivy_jian@compal.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-28google/kahlee: Fix ASL whitespace and formattingMarc Jones
Clean up the ASL whitespace and formatting to match the iasl -d style as other parts of coreboot. Change-Id: I61689cb55dc26cbad160d45aa0a36c00b386fe0c Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-28google/kahlee: Remove conflicting AAHB IRQ ASLIvy Jian
The AMD internal A-link (AAHB device) doesn't support an IRQ, so remove it. This solves a conflict with the GPIO IRQ required for touchpad operation. Change-Id: Iefaf33cfb2babc29d35b5372fc3a338a72c78a4a Signed-off-by: Ivy Jian <ivy_jian@compal.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-28mb/google/soraka: configure GPP_B8 to control WLAN_PE_RSTRizwan Qureshi
WLAN_PE_RST control was moved from EC to SoC, it connected to GPP_B8. Configure GPP_B8 to drive low. TEST=Wifi card is detected and connect to an AP. Change-Id: I6a6ea0ddefe8402284fe37665864c7a1961cbc15 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/20804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-27google/kahlee: Set SERIRQ to continuous modeMarc Jones
The Kahlee Nuvoton EC firmware doesn't support SERIRQ quiet mode, yet. Set continuous mode until the quiet mode feature is available. This allows keyboard and other EC based interrupts through. Change-Id: If77c91fde2bd0f4da85413879fefb753ae6297de Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19840 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27google/kahlee: Pass GPIO setting in amdinitenvMarshall Dawson
GPIOs for I2C3 were being unset in amdinitmid if the GPIO enable table wasn't passed. It had been initialy set in amdinitreset. Pull the GPIO settings into their own file that can be used in bootblock and later stages. Change-Id: I41cd7873f8c8543c95ad8653e0a3887f7d0487a2 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27google/kahlee: Update PCIe link/lane configurationMarshall Dawson
Enable: GPP0 x1 - WLan GPP1 x1 - Card Reader Change-Id: Idbfc2a3260b85949810bdd8dc904e59f8a779e48 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 13:24:19 +0000