aboutsummaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2016-06-04soc/apollolake: Put CSE to low power stateHannah Williams
fsp_notify(END_OF_FIRMWARE) should be sent to FSP to enable putting CSE in low power state Change-Id: I76b8e85ccf077032616ba8e4a333d9264dc65ed2 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/15054 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-04soc/apollolake/pmc: Store the ACPI bar during set_resources stageAlexandru Gagniuc
Because the resource for the ACPI BAR is fixed, pci_dev_set_resources does not store it to the device. This means we need to do part of the dance to get the ACPI IO region to work after coreboot. Of course, this BAR can be destroyed later by the OS probing it, but at least we try to get it working out of coreboot. Change-Id: Ibff18d30936f94d4f149a89313254531365f43e6 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/15048 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-04nb/intel/x4x: Fix unpopulated valueDamien Zammit
Previously, 0x0 was the value being used for an unpopulated dimm on spd[62], however some DDR2 dimms have 0x0 as a valid value. Now use 0xff which is an unused value even on DDR2/DDR3. Change-Id: I55a91a6c3fe3733a7bb2abc45ca352c955c07c99 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/15058 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-04AGESA boards: Split dispatcher to romstage and ramstageKyösti Mälkki
The way dispatcher table is set up prevents linker from optimizing unused code away, we currently have raminit in ramstage. Optimize this manually by configuring AGESA_ENTRY booleans for romstage and ramstage separately. This will remove references in FuncParamsInfo and DispatchTable -arrays. All boards now include multi-core dispatcher, it has minimal footprint: AGESA_ENTRY_LATE_RUN_AP_TASK ACPI S3 support depends on HAVE_ACPI_RESUME being enabled: AGESA_ENTRY_INIT_RESUME AGESA_ENTRY_INIT_LATE_RESTORE AGESA_ENTRY_INIT_S3SAVE Disabled for all boards as it was not used: AGESA_ENTRY_INIT_GENERAL_SERVICES Change-Id: I7ec36a5819a8e526cbeb87b04dce4227a1689285 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14417 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-04gm45: enable setting all vram sizes from cmosArthur Heymans
Setting the size of the preallocated memory for the igd is done using a cmos parameter, gfx_uma_size. This was limited to a subset of all available sizes, that were already implemented elsewhere in the northbridge code. What this does is change the cmos parameter to 4 bits instead of 3 bits to accomodate all vram sizes. It also adds a sane default of 32mb that already was in place. The northbridge code that reads this cmos parameter is also changed for this new cmos settings. 352M is disabled since it causes issues on systems with 4GB or more ram. TEST: Build, flash target. Clear cmos by corrupting the checksum (nvramtool -c something). Set a desired value in gfx_uma_size using nvramtool. "dmesg | grep stolen" to see what is actually allocated. Change-Id: Ia6479d03f1abe6d0c94bd7264365505e8f8eaeec Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/14900 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-06-04AGESA f12 f15: Add OEM customisationKyösti Mälkki
Follow-up on commits a5d72a3 and 53052fe for f12 and f15. OEM Hooks are not BiosCallOuts. Change-Id: Iab22b0d73282a5a1a5d1344397b4430c0ebb81b5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14888 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-04AGESA: Fix invalid use of CFG_ declarationsKyösti Mälkki
The declarations of CFG_ evaluate to correct values only when included after the definitions of BLDCFG_ in buildOpts.c. So we never have CFG_PLAT_NUM_IO_APICS defined here. Change-Id: I94b3dee5a3207b37921eb24a0bcd73b5a217b2d3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14887 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-04AGESA: Fix invalid BLDCFG_ and CFG_ useKyösti Mälkki
The definitions of CFG_ would evaluate to incorrect values when Options.h is included outside buildOpts.c, where all BLDCFG_ values are defined. Already done for f16kb. Change-Id: I5d725b9306027c7c46c6450ab17b692fa948cf5b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14886 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-04AGESA: Drop unused assembly filesKyösti Mälkki
Change-Id: I0a452b6234b02222be82ca8694868e1ffbfceaee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14396 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-04AGESA: Remove unused platform configuration filesKyösti Mälkki
Change-Id: Ie6effa802f6971c59b5c4e07ca7d98736e27859f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14885 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-04AGESA f10: Pick sample platform configurationKyösti Mälkki
Tree does not have any AGESA f10 boards. Keep the Danube platform as a sample configuration file for unlikely future use. Change-Id: I025aff48fcd0884b45e2a0a993d82f317ede48be Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14884 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-03AMD boards: Drop comment on include fileKyösti Mälkki
The included file does not declare pm_ioread(), and the modified file does not call it either. Change-Id: I9723caf1062db23b4a3648e07c2dc4c02f862619 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14968 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-03aopen/dxplplusu: Disable HW scrubberKyösti Mälkki
See initialize_ecc() for the awful hack that got us around cache-as-ram being invalidated as we do ECC HW scrubbing. It once worked, but compiler nowadays puts more registers on the stack. Not much interest to try fix ECC for this particular board. Change-Id: Ie6a09e28b0af5bbf2d68af72f5d98c03df33c402 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15014 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-03rockchip: gru: enable eDP displayLin Huang
This patch enables eDP display by: o. setting HPD pinmux, backlight, vdd for eDP o. setting vop mode o. enabling VGA configs for edid BRANCH=none BUG=chrome-os-partner:51537 TEST=The dev screen is shown on kevin board Change-Id: If8b07307454daa88727d317cc208d6c97de07ad7 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: b1ad9337510f5437f691153dc68883edf273e4c7 Original-Change-Id: Id7006619b5be638b286a5402d892a5361ac1e430 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/340026 Original-Reviewed-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/14858 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-03rockchip: rk3399: initialize display for eDPShunqian Zheng
This patch adds functions to init the display. To set up the display, initialize the eDP and read the EDID. Based on these, we then set the clock for VOP, and finally enable VOP and backlight. For a mainboard, it should set the vop_id, vop_mode and framebuffer_bits_per_pixel in devicetree.cb. For VOP_MODE_AUTO_DETECT, it will try eDP first and then HDMI (which is not supported yet). EDIT: Updated Makefile to only build in new files if MAINBOARD_DO_NATIVE_VGA_INIT is enabled. All of these platforms should have it enabled, so this shouldn't make any difference except now, before the platform code is in place. BRANCH=none BUG=chrome-os-partner:51537 TEST=test with the other patch Change-Id: If935415026c945ab6ee128bd6bbdd792890aa24a Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: c1020cc806775629f4d5dc57bd805a9a12169386 Original-Change-Id: Ic32d0a251cb8e08aa5f0b15b2c06c4e02c08a761 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/342336 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14857 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-03drivers/intel/fsp1_1: Make weak routines quietLee Leahy
Now that there is a better way of finding optional routines, make the weak routines quiet so that it may be used for the optional implementation. TEST=Build and run on Galileo Gen2 Change-Id: Ic58c7de216394f80aee3a78dd08bd4682783be42 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15043 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-03mainboard/intel/galileo: Add CREATE_BOARD_CHECKLISTLee Leahy
Select CREATE_BOARD_CHECKLIST to create the checklist for the Quark SOC and Galileo board. TEST=Build and run on Galileo Gen2. Change-Id: Ieb3e9a5a4c149cf160e11d44a515591b57fe5c83 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15004 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-03Add Board Checklist SupportLee Leahy
Build the <board>_checklist.html file which contains a checklist table for each stage of coreboot. This processing builds a set of implemented (done) routines which are marked green in the table. The remaining required routines (work-to-do) are marked red in the table and the optional routines are marked yellow in the table. The table heading for each stage contains a completion percentage in terms of count of routines (done .vs. required). Add some Kconfig values: * CREATE_BOARD_CHECKLIST - When selected creates the checklist file * MAKE_CHECKLIST_PUBLIC - Copies the checklist file into the Documenation directory * CHECKLIST_DATA_FILE_LOCATION - Location of the checklist data files: * <stage>_complete.dat - Lists all of the weak routines * <stage>_optional.dat - Lists weak routines which may be optionally implemented TEST=Build with Galileo Gen2. Change-Id: Ie056f8bb6d45ff7f3bc6390b5630b5063f54c527 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15011 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-03mainboard/intel/galileo: Set board versionLee Leahy
Return the correct board version in SMBIOS. TEST=Build and run on Galileo Gen2 Change-Id: I97ec7bcd475142eb90930152da0244a3c5d09634 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15041 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-03chromeec: Move EC image hash to separate file in CBFSJulius Werner
The Chrome OS bootloader is changing its EC software sync mechanism to look for the hash of an EC image in a separate CBFS file, rather than using the CBFS hash attribute of the image itself (see http://crosreview.com/348061). This patch makes coreboot generate appropriate hash files for the new format when it builds and bundles a Chrome EC image. This also allows us to compress the EC image itself. Change-Id: I9aee6b8d24cdf41cb540db86a7569038fc7d9937 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15039 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-03AGESA boards: Drop unused includeKyösti Mälkki
These files do not use definitions from OptionsIds.h. Also those definitions are required and already included for Ids.h. Change-Id: I149fcfe2ad72fe3d7390ee2043a86432aeae3f08 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14980 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-03intel/fsp_baytrail/i2c: mask i2c interrupts in i2c_init()Ben Gardner
i2c_init() leaves the I2C device enabled. Combined with the default interrupt mask (0x8ff) and the fact that the interrupt line is shared, this leads to an interrupt storm in the OS until a proper I2C driver is loaded. This change clears the interrupt mask to prevent the interrupt storm. Change-Id: I0424a00753d06e26639750f065a7a08a710bfaba Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/15047 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2016-06-03intel/apollolake: Clear TSEG reg early in bootblockFurquan Shaikh
TSEG register comes out of reset with a non-zero default value. This causes issues when cbmem_top returns non-zero value based on TSEG read before DRAM is initialized. Thus, clear TSEG reg early in bootblock to avoid unwanted side-effects. Change-Id: Id3c6c270774108e4caf56e2a07c5072edc65bb58 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15049 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-02intel/apollolake: Add car.c to verstageFurquan Shaikh
Verstage on apollolake requires the functions defined in car.c to perform flush of l1d to l2 on loading romstage into CAR. Change-Id: I6d9a0b9dfb58c2126ad70172846e90663e588857 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15046 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-02cbfs: Use NO_XIP_EARLY_STAGES to decide if stage is XIPFurquan Shaikh
Modern platforms like Apollolake do not use XIP for early stages. In such cases, cbfs_prog_stage_load should check for NO_XIP_EARLY_STAGES instead of relying on ARCH_X86 to decide if a stage is XIP. Change-Id: I1729ce82b5f678ce8c37256090fcf353cc22b1ec Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15045 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-02google/reef: Select UART_FOR_CONSOLE for reefFurquan Shaikh
Change-Id: I714af8ab552dc1923a1b64e0c502d6c7b96dd444 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15044 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-02lenovo/t420: correct the eSATA portIru Cai
The eSATA port of Lenovo T420 is port 3. I've checked it on an iGPU model and a dGPU model. Change-Id: I64bcc887140c1634dd1475d29e97780a5128d0be Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/14632 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2016-06-02drivers/intel/fsp1_1: Update weak MRC cache routinesLee Leahy
Update the weak functions for the MRC cache. TEST=Build and run on Galileo Gen2 Change-Id: I54a1252cfff1a2f68b163f0feb65e2bceb37f6a9 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15042 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-02SMBIOS: Implement SKU fieldKyösti Mälkki
Leave it for the platform to fill in the string. Change-Id: I7b4fe585f8d1efc8c9743f0d8b38de1f98124aab Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14996 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-06-02generic: Add a Maxim 98357A codec driverDuncan Laurie
The Maxim Integrated 98357A codec is an I2S slave device that has no control channel for configuration and instead provides a GPIO that is used for channel selection and power down. This means it does not fit into a bus hierarchy easily and is instead represented as a generic device and found with a static bus scan using the devicetree. This driver provides configuration options for passing the "sdmode" GPIO descriptor as well as a second option for "sdmode delay" which can configure the timing of the sdmode toggling in relation to the I2S channel output. In addition an GPIO can be provided to indicate to the driver whether this device is present or not. This can be used for board designs that may have different codec possibilities that are selected by HW strap. Sample usage for this device driver: device pci 1f.3 on chip drivers/generic/max98357a register "sdmode_gpio" = "ACPI_GPIO_OUTPUT(GPP_C6)" register "sdmode_delay" = "100" device generic 0 on end end end Will result in the following code in the SSDT: Scope (\_SB.PCI0.HDAS) { Device (MAXM) { Name (_HID, "MX98357A") Name (_UID, Zero) Name (_DDN, "Maxim Integrated 98357A Amplifier") Method (_STA) { Return (0xF) } Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.PCI0.GPIO", 0, ResourceConsumer) }) Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "maxim,sdmode-gpio", \_SB.PCI0.HDAS.MAXM, 0, 0, 0 } Package () { "maxim,sdmode-delay", 100 } Package () { "sdmode-delay", 100 } } }) } } Change-Id: Ia0bafe49bea9bbe4a3cc0f9f9cdb6f6390da57b5 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15017 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-02i2c: Add a generic i2c driverDuncan Laurie
This adds a generic I2C driver that can be described in the devicetree and used to generate ACPI objects in the SSDT based on the information provided in the config registers. The I2C bus can be configured and the device can provide an interrupt and wake capability to the OS. A configuration option allows for a GPIO to be provided that will be checked to determine if the device is preset on the board before including it in the generated SSDT. The driver is generic enough to be used for basic I2C devices that do not have special configuration needs such as touchpads, touchscreens, sensors, some audio codec/amplifiers, etc. Sample usage for a touchpad device: device pci 15.1 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = "ELAN Touchpad" register "irq" = "IRQ_EDGE_LOW(GPP_B3_IRQ)" register "wake" = "GPE0_DW0_05" device i2c 15.0 on end end end Will result in the following code in the SSDT: Scope (\_SB.PCI0.I2C1) { Device (D015) { Name (_HID, "ELAN0000") Name (_UID, 0) Name (_S0W, 4) Name (_PRW, Package () { 5, 3 }) Method (_STA) { Return (0x0f) } Name (_CRS, ResourceTemplate () { I2cSerialBus (0x15, ControllerInitiated, 400000, AddressingMode7Bit, "\\_S.PCI0.I2C1", 0, ResourceConsumer) Interrupt (ResourceConsumer, Edge, ActiveLow) { 51 } }) } } Change-Id: Ib32055720835b70e91ede5e4028ecd91894d70d5 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15016 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-02drivers/intel/wifi: Add support for generating SSDT tableDuncan Laurie
Intel WiFi devices that support wake-on-wifi need to declare a Power Resource for this wake pin. Typically this has been done with a static declaration in the DSDT for each mainboard. By adding it to the existing intel/wifi driver it can be done based on a configuration register in the devicetree. Additionally the WiFi regulatory domain can be set in the SSDT directly instead of needing to use NVS to pass the value to the DSDT. Also add device IDs for Wilkins Peak 2 and Stone Peak 2 devices that are found on Chromebooks, and clean up a long line and some comment formatting. This was tested by booting on an HP Chromebook 13 device and comparing that the output in the SSDT matches what used to be in the DSDT. The WRDD value is read from VPD, if present, not from devicetree.cb. Additionally the case where CONFIG_DRIVERS_INTEL_WIFI is enabled but the wifi device is not described in devicetree.cb is tested to ensure it still generates the AML but does not include the _PRW wake pin. Example: devicetree.cb: device pci 1c.0 on chip drivers/intel/wifi register "wake" = "GPE0_DW0_16" device pci 00.0 on end end end VPD: "region"="us" SSDT.dsl: Scope (\_SB.PCI0.RP01) { Device (WIFI) { Name (_UID, Zero) Name (_DDN, "Intel WiFi") Name (_ADR, 0x00000000) Name (_PRW, Package () { 16, 3 }) Name (WRDD, Package () { Zero, Package () { 0x00000007, 0x00004150 } }) } } Change-Id: I8b5c916f1a04742507dc1ecc9a20c19d3822b18c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15019 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-02wrdd: Export WRDD info in the headerDuncan Laurie
Export the WRDD spec revision and WiFi domain type in the header file so it can be used to generate ACPI tables by wifi drivers. Change-Id: I3222eca723c52fe74a004aa7bac7167264249fd1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15018 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-02Gale board: Move TPM setup function to verstage.cKan Yan
TPM should be only be reset once in verstage. BUG=chrome-os-partner:51096 TEST=Depthcharge no longer shows TPM error. BRANCH=None Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Commit-Id: 911bdaa83a05fa5c8ea82656be0ddc74e19064c3 Original-Change-Id: I52ee6f2c2953e95d617d16f75c8831ecf4f014f9 Original-Reviewed-on: https://chromium-review.googlesource.com/343537 Original-Commit-Ready: Kan Yan <kyan@google.com> Original-Tested-by: Kan Yan <kyan@google.com> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Change-Id: I8047b7ba44c604d97a662dbf400efc9eea2c7719 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14845 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2016-06-01mb/lenovo/T4xx: enable PEG devicePatrick Rudolph
Enable the PEG device in devicetree to expose the device if any. This is already default behaviour for T5xx series. Change-Id: I16bd253ca96c4cdaad8a829f6490cec9e2599b5f Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14448 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-06-01drivers/lenovo: Add hybrid graphics driverPatrick Rudolph
Add a universal hybrid graphics driver compatible with all supported lenovo devices. Hybrid graphics allows to connect the display panel to either of one GPUs. As there are only two GPUs one GPIO needs to be toggled. In case the discrete GPU is activated the panel is routed to it. On deactivation the panel is routed to the integrated GPU. On lenovo laptops the dGPU is always connected to PEG10 and it is save to disable the PEG slot on dGPU deactivation. Use common gpio.c for southbridge I82801IX. Tested on Lenovo T520 using Nvidia NVS 5200m. Removed Lenovo T430s from the list of supported devices, as the T430s only supports "muxless Optimus". Depends on change id: Iccc6d254bafb927b6470704cec7c9dd7528e2c68 Ibb54c03fd83a529d1ceccfb2c33190e7d42224d8 I8bd981c4696c174152cf41caefa6c083650d283a Iaf0c2f941f2625a5547f9cba79da1b173da6f295 I994114734fa931926c34ed04305cddfbeb429b62 Change-Id: I9b80b31a7749bdf893ed3b772a6505c9f29a56d1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/12896 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-06-01Revert "mainboard/lenovo/t400: Add initial hybrid graphics support"Patrick Rudolph
This reverts commit 59597ead1f26d4c18997bda81b2ec33e52973b80. Will be replaced by lenovo common hybrid driver. Change-Id: I994114734fa931926c34ed04305cddfbeb429b62 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/12895 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-06-01nau8825: Add driver for I2C codecDuncan Laurie
The Nuvoton NAU8825 audio codec is an I2C device that has a number of tunable parameters that can be provided to the kernel device driver for basic configuration and optimal operation. The configuration options are exposed to devicetree as registers and then presented as Device Properties via ACPI to the operation system. This sample configuration in devicetree: device pci 19.2 on chip drivers/i2c/nau8825 register "irq" = "IRQ_LEVEL_LOW(GPP_F10_IRQ)" register "jkdet_enable" = "1" register "sar_threshold_num" = "2" register "sar_threshold[0]" = "0x0c" register "sar_threshold[1]" = "0x1c" device i2c 1a on end end end Will generate the following code in the SSDT, trimmed for this commit message as there are more properties that can be configured: Scope (\_SB.PCI0.I2C4) { Name (_HID, "10508825") Name (_UID, Zero) Name (_DDN, "Nuvoton NAU8825 Codec") Method (_STA) { Return (0xF) } Name (_CRS, ResourceTemplate () { I2cSerialBus (0x1A, ControllerInitiated, 0x61A80, AddressingMode7Bit, "\_SB.PCI0.I2C4", 0, ResourceConsumer) Interrupt (ResourceConsumer, Level, ActiveLow) { 0x3A } }) Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bff4aa301"), Package () { Package () { "nuvoton,jkdet-enable", 1 }, Package () { "nuvoton,sar-threshold-num", 2 }, Package () { "nuvoton,sar-threshold", Package () { 0x0c, 0x1c } } } }) } Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I480d72daf5ac3dded9b1cbb5fbc737b9dfde3834 Reviewed-on: https://review.coreboot.org/15015 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-01intel/fsp2.0: Add END_OF_FIRMWARE in enum fsp_notify_phaseHannah Williams
Change-Id: Ib39e828c6e3145957ecc2dacc1f72de793165514 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/15020 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-01soc/apollolake: remove _RMV and _DSW methods from xhci.aslHannah Williams
Change-Id: Ic314656f34fda10e58e55bdefeb0a1f0c6ab5ae2 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14966 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-06-01intel/apollolake: Add support to enable google ChromeECShaunak Saha
ChromeEC is needed for EC controlled features to work properly. This patch adds neccessary support in soc/intel so that mainboard asl files can include the ChromeEC e.g. PNOT method and LPCB and also the nvs fields. BUG = 53096 TEST = This patch is needed by the mainboard specific ASL change to include src/ec/google/chromeec/acpi/ec.asl Change-Id: Icecc437df05cd3efb41579317a353fd22526e0c9 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/14967 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-01soc/intel/apollolake: add support for IFWI regionFurquan Shaikh
On apollolake, the boot media layout is different in that the traditional "BIOS" region contains another data structure with the boot assets such as CSE firmware, PMC microcode, CPU microcode, and boot firmware to name a few. This region is referred to as the IFWI. Add support for writing the IFWI to a specified FMAP region to accommodate such platforms. Change-Id: Ia61f12a77893c3dd3256a9bd4e0f5eca0065de26 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14999 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-01mainboard/google/reef: Add IFWI region to chromeos.fmdFurquan Shaikh
IFWI region holds different components required for booting including CSE firmware, PMC firmware, CPU microcode as well as the bootblock. Add section for IFWI in chromeos.fmd Change-Id: Ic97980ff222ad7cbd7a2970417b79150256a7a16 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15000 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31quark: Enable HSUART0 as consoleLee Leahy
The use of HSUART0 on galileo requires early initialization of the I2C GPIO expanders to direct the RXD and TXD signals to DIGITAL 0 and 1 on the expansion connector. TEST=None Change-Id: I11195d79e954c1f6bc91eafe257d7ddc1310b2e7 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15010 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31soc/intel/quark: Move UART init into romstage.cLee Leahy
Move UART initialization into romstage.c and eliminate uart.c. TEST=Build and run on Galileo Gen2 Change-Id: I5f2c9b4c566008000c2201c422a0bba63da64487 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15009 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31mainboard/intel/quark: Enable reg_access during romstageLee Leahy
Turn on reg_access during romstage. TEST=Build and run on Galileo Gen2 Change-Id: Iff1616836d6031f43d7741693febefa0bf26b948 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15008 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31soc/intel/quark: Split I2C out from driverLee Leahy
Split out the I2C code to allow I2C transactions during early romstage. TEST=Build and run on Galileo Gen2 Change-Id: I87ceb0a8cf660e4337738b3bcde9d4fdeae0159d Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15007 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31soc/intel/quark: Set temporary I2C base addressLee Leahy
Set a temporary I2C base address during romstage. TEST=Build and run on Galileo Gen2 Change-Id: I4b427c66a4e7e6d30cc611d4d3c40bb0ea36066d Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15006 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31mainboard/intel/galileo: Use HSUART1 for consoleLee Leahy
Select HSUART1 for console. TEST=Build and run on Galileo Gen2 Change-Id: I4425af4dc8b3730b3fa2108d6cc2941bc22c2cdb Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15005 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31soc/intel/quark: Conditionally define BIT namesLee Leahy
Only define BIT names if they are not already defined. TEST=Build and run on Galileo Gen2 Change-Id: Ief4c4bb7a42a1bb2a7f46f13dc9b8bbb4d233e3c Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15002 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31mainboard/intel/galileo: Split out enabling FSP1_1Lee Leahy
Split out enabling FSP 1.1 support to prepare for enabling FSP 2.0 support. TEST=Build and run on Galileo Gen2. Change-Id: Ic4e814bcf61f9480f98e2d7bc7a1648dec43a07d Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15001 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31soc/intel/quark: Fix reg_script displayLee Leahy
Remove extra ": " following reigster type. TEST=Build and run on Galileo Gen2 Change-Id: I57dd40a540d7b5371a6c45174f47a311b83a2aab Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14948 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31soc/intel/quark: Clear SMI interrupts and wake eventsLee Leahy
Migrate the clearing of the SMI interrupts and wake events from FSP into coreboot. TEST=Build and run on Galileo Gen2 Change-Id: Ia369801da87a16bc00fb2c05475831ebe8a315f8 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14945 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31soc/intel/quark: Rename pmc.c to lpc.cLee Leahy
Rename the file pmc.c to lpc.c to prepare for further additions. TEST=Build and run on Galileo Gen2 Change-Id: If98825d72878f0601f77bff8c766276dbda8a9ae Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14946 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31soc/intel/quark: Add PCIe reset supportLee Leahy
Migrate PCIe reset from PlatformPciHelperLib in QuarkFspPkg into coreboot. Change-Id: I1c33fa16b0323091e8f9bd503bbfdb8a253a76d4 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14944 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31google/ninja: Upstream AOpen Chromebox CommericalMatt DeVillier
Migrate google/ninja (AOpen Chromebox Commerical) from Chromium tree to upstream, using google/rambi as a reference. original source: branch firmware-ninja-5216.383.B commit 582a393 [Ninja, Sumo: Add SPD source for Hynix H5TC4G63CFR-PBA] TEST=built and booted Linux on ninja with full functionality blobs required for working image: VGA BIOS (vgabios.bin) firmware descriptor (ifd.bin) Intel ME firmware (me.bin) MRC (mrc.elf) external reference code (refcode.elf) Change-Id: I0f1892c24c08fa2d53185b2cf8b6f5a9001b2397 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/14950 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31commonlib/lz4: Avoid unaligned memory access on RISC-VJonathan Neuschäfer
From the User-Level ISA Specification v2.0: "We do not mandate atomicity for misaligned accesses so simple implementations can just use a machine trap and software handler to handle misaligned accesses." (— http://riscv.org/specifications/) Spike traps on unaligned accesses. Change-Id: Ia57786916f4076cc08513f4e331c2deec9cfa785 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14983 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31lib/hardwaremain: Add \n to "Boot failed" messageJonathan Neuschäfer
Change-Id: I106fccd725a5c944f4e8e0f196b31c9344f588c7 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14984 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31soc/intel/apollolake: Update SPI memory mapping constraintsAndrey Petrov
MMIO region of 256 KiB under 4 GiB is not decoded by SPI controller by hardware design. Current code incorrectly specifies size of that region to be 128 KiB. This change corrects the value to 256 KiB. Change-Id: Idcc67eb3565b800d835e75c0b765dd49d1656938 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14979 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-05-31mb/gigabyte/ga-g41m-es2l: Update board_info.txt and add item to KconfigDamien Zammit
This adds the website URL to the board info and also enables the realtek nic reset function as per a previous patch. Change-Id: I2cda120c59b55f0dd2ffa78d397b16beb13d6843 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/14954 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31drivers/net/r8168: Add driver for realtek nicDamien Zammit
One thing that is vital to this patch is the MAC address setting in case the EEPROM/efuse is unconfigured. Linux now recognises the default MAC address on GA-G41M-ES2L which does rely on the default bios settings for the MAC address. Change-Id: I32e070b545b4c6369686a7087b7ff838d00764e3 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/14927 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31mb/gigabyte/ga-g41m-es2l: Use x4x_late_init()Damien Zammit
This patch adds DMI/EP init to the board and fixes a couple of minor things. Change-Id: I10d0f6ce747b60499680e4dc229b7fcbb16cc039 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/14926 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31nb/intel/x4x: Add DMI/EP initDamien Zammit
The values were obtained from vendor bios at runtime. I am not 100% sure of the sequence required to initiate them, but guessed from the gm45 code. There may be some status bytes needed to be polled during the sequence that is missing, but as I don't have bios writer's datasheet it's very hard for me to know. Change-Id: Idd205e0bab5f75e01c6e3a5dc320c08639f52db8 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/14925 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31mb/gigabyte/ga-g41m-es2l: Fix ACPI IRQ settings for SATADamien Zammit
Previously, due to a bug in devicetree and incorrect IRQ settings in ACPI, SATA controller would not initialize any HDDs in the OS, even though it worked in SeaBIOS. The devicetree setting is not needed because SATA must function in "plain" mode on this board, as "combined" mode does not work at all. Change-Id: I0036c4734de00b84cc3d64f38e4b1fd80fd1a25d Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/14776 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31skylake: Add SD card device to configure card detect GPIODuncan Laurie
Add a PCI driver for the skylake SD card device and have it generate an entry in the SSDT for the card detect GPIO if it is provided by the mainboard in devicetree. This sets up a card detect GPIO configuration that will trigger an interrupt on both edges with a 100ms debounce timeout and can wake the SD controller from D3 state. The GpioInt() entry is bound to the "cd-gpio" device property which will be consumed by the kernel driver. The resulting ACPI output in the SSDT will be combined with the SDXC device declaration in the DSDT. Example: Scope (\_SB.PCI0.SDXC) { Name (_CRS, ResourceTemplate () { GpioInt (Edge, ActiveBoth, SharedAndWake, PullNone, 10000, "\\_SB.PCI0.GPIO", 0, ResourceConsumer) { 35 } }) Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "cd-gpio", Package () { \_SB.PCI0.SDXC, 0, 0, 1 } } } }) } Change-Id: Ie4c1bfadd962cf55a987edb9ef86e92174205770 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14995 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31skylake: Cleanup formatting in pci_devs.hDuncan Laurie
Minor cleanups in pci_devs.h for indentation and newlines to be consistent throughout the file. Change-Id: I522df141a6b33d918cfb3de1b9019c0c4a73e3e5 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14994 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31skylake: Add Audio DSP deviceDuncan Laurie
Add the Audio DSP device for skylake as a PCI driver with a static scan_bus handler so generic devices can be declared under it. This is for devices like the Maxim 98357A which is connected on the I2S bus for data but has no control channel bus and instead just has a GPIO for channel selection and power down control and needs to describe that GPIO connection to the OS via ACPI. Change-Id: Iae02132ff9c510562483108ab280323f78873afd Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14993 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31skylake: Add I2C devicesDuncan Laurie
Add the I2C devices to skylake with the scan_bus handler for SMBUS devices so that I2C-based devices can be declared in devicetree.cb and get initialized properly during ramstage. This does not yet provide the I2C driver, but it allows for devices that are declared in devicetree.cb to provide ACPI tables to the OS. Change-Id: I9dfe4a06a8b0bc549a2b0e2d7c033c895188ba30 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14992 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31skylake: Add GPE header file to chip.hDuncan Laurie
Add the GPE header file to skylake chip.h so the SOC-defined macros for the various GPE values can be used in devicetree directly. For example: chip drivers/i2c/touchpad register "wake" = "GPE0_DW0_05" device i2c 15.0 on end end Change-Id: Ic322108561b34aa34a24a4daba6ba7a4f7a3f9a4 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14991 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31Fix leaking CONFIG_VGA=yKyösti Mälkki
Items under DEVICE_SPECIFIC_OPTIONS got selected without the driver being selected. Change-Id: I1797fa6175620a9291873559a6308eaea85a090e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14823 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31mainboard/asus/[kgpe-d16|kcma-d8]: Enable secondary serial port headerTimothy Pearson
The ASUS KGPE-D16/KCMA-D8 have an on-board header for a second RS-232 serial port, however it is disabled by default due to the SuperIO default pin mux settings. Enable the secondary serial port early in romstage to allow use during / after initial boot. Change-Id: I5b83659dd8b0d6af559c9ceccee55c4cc2f17165 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14892 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-30reef: Remove si-all region from chromeos.fmdFurquan Shaikh
This matches the change in depthcharge fmap.dts to remove si-all region and mark si-desc as ifd. CQ-DEPEND=CL:347986 BUG=chrome-os-partner:53689 BRANCH=None TEST=Compiles successfully Change-Id: Ic7ed94fcdfb9a79bd6ceb960830f67678b0291b6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14990 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-30pcengines/apu1: Rename Kconfig variables for pinmuxKyösti Mälkki
Add APU1 prefix because Kconfig throws errors if we try to define the same variables as choice-entry for APU2 board. Change-Id: Ic071600dd88e391a8a278d63aad13abd01fd3c9d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14988 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-05-30AMD/spi: Do not reset fifo after skipping the sent byteszbao
After we skip the bytes we send, the fifo pointer is at right position. Reseting the fifo will change it to a wrong place. Please view the flashrom code, which tells the same thing. https://code.coreboot.org/p/flashrom/source/tree/HEAD/trunk/sb600spi.c#L257 Change-Id: I31d487ce32c0d7ca3dead36d2b14611e73b1ad60 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/14955 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-29sio/winbond/w83667hg-a: Add pinmux defines for UART BTimothy Pearson
Change-Id: Ib98c69de781d2b651ec168d03250cacc918c5c1f Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/14965 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-05-29sio/winbond/common: Add function to configure pin muxTimothy Pearson
Certain mainboards require SuperIO pinmux configuration before peripherals will become operational. Allow each mainboard to configure the pinmux(es) of Winbond chips if needed. Change-Id: Ice19f8d8514b66b15920a5b893700d636ed75cec Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/14960 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-05-28acpi_device: Add support for writing ACPI Device PropertiesDuncan Laurie
The recent ACPI specification extensions have formally defined a method for describing device information with a key=value format that is modeled after the Devicetree/DTS format using a special crafted object named _DSD with a specific UUID for this format. There are three defined Device Property types: Integers, Strings, and References. It is also possible to have arrays of these properties under one key=value pair. Strings and References are both represented as character arrays but result in different generated ACPI OpCodes. Various helpers are provided for writing the Device Property header (to fill in the object name and UUID) and footer (to fill in the property count and device length values) as well as for writing the different Device Property types. A specific helper is provided for writing the defined GPIO binding Device Property that is used to allow GPIOs to be referred to by name rather than resource index. This is all documented in the _DSD Device Properties UUID document: http://uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf This will be used by device drivers to provide device properties that are consumed by the operating system. Devicetree bindings are often described in the linux kernel at Documentation/devicetree/bindings/ A sample driver here has an input GPIO that it needs to describe to the kernel driver: chip.h: struct drivers_generic_sample_config { struct acpi_gpio mode_gpio; }; sample.c: static void acpi_fill_ssdt_generator(struct device *dev) { struct drivers_generic_sample_config *config = dev->chip_info; const char *path = acpi_device_path(dev); ... acpi_device_write_gpio(&config->mode_gpio); ... acpi_dp_write_header(); acpi_dp_write_gpio("mode-gpio", path, 0, 0, 0); acpi_dp_write_footer(); ... } devicetree.cb: device pci 1f.0 on chip drivers/generic/sample register "mode_gpio" = "ACPI_GPIO_INPUT(GPP_B1)" device generic 0 on end end end SSDT.dsl: Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionInputOnly, "\\_SB.PCI0.GPIO", 0, ResourceConsumer) { 25 } }) Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"mode-gpio", Package () { \_SB.PCI0.LPCB, 0, 0, 1 }} } }) Change-Id: I93ffd09e59d05c09e38693e221a87085469be3ad Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14937 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-28acpi_device: Add support for writing ACPI SPI descriptorsDuncan Laurie
Add required definitions to describe an ACPI SPI bus and a method to write the SpiSerialBus() descriptor to the SSDT. This will be used by device drivers to describe their SPI resources to the OS. SPI devices are not currently enumerated in the devicetree but can be enumerated by device drivers directly. generic.c: void acpi_fill_ssdt_generator(struct device *dev) { struct acpi_spi spi = { .device_select = dev->path->generic.device.id, .device_select_polarity = SPI_POLARITY_LOW, .spi_wire_mode = SPI_4_WIRE_MODE, .speed = 1000 * 1000; /* 1 mHz */ .data_bit_length = 8, .clock_phase = SPI_CLOCK_PHASE_FIRST, .clock_polarity = SPI_POLARITY_LOW, .resource = acpi_device_path(dev->bus->dev) }; ... acpi_device_write_spi(&spi); ... } devicetree.cb: device pci 1e.2 on chip drivers/spi/generic device generic 0 on end end end SSDT.dsl: SpiSerialBus (0, PolarityLow, FourWireMode, 8, ControllerInitiated, 1000000, ClockPolarityLow, ClockPhaseFirst, "\\_SB.PCI0.SPI0", 0, ResourceConsumer) Change-Id: I0ef83dc111ac6c19d68872ab64e1e5e3a7756cae Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14936 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-28acpi_device: Add support for writing ACPI I2C descriptorsDuncan Laurie
Add required definitions to describe an ACPI I2C bus and a method to write the I2cSerialBus() descriptor to the SSDT. This will be used by device drivers to describe their I2C resources to the OS. The devicetree i2c device can supply the address and 7 or 10 bit mode as well as indicate the GPIO controller device, and the bus speed can be fixed or configured by the driver. chip.h: struct drivers_i2c_generic_config { enum i2c_speed bus_speed; }; generic.c: void acpi_fill_ssdt_generator(struct device *dev) { struct drivers_i2c_generic_config *config = dev->chip_info; struct acpi_i2c i2c = { .address = dev->path->i2c.device, .mode_10bit = dev->path.i2c.mode_10bit, .speed = config->bus_speed ? : I2C_SPEED_FAST, .resource = acpi_device_path(dev->bus->dev) }; ... acpi_device_write_i2c(&i2c); ... } devicetree.cb: device pci 15.0 on chip drivers/i2c/generic device i2c 10.0 on end end end SSDT.dsl: I2cSerialBus (0x10, ControllerInitiated, 400000, AddressingMode7Bit, "\\_SB.PCI0.I2C0", 0, ResourceConsumer) Change-Id: I598401ac81a92c72f19da0271af1e218580a6c49 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14935 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-28acpi_device: Add support for writing ACPI GPIO descriptorsDuncan Laurie
Add definitions to describe GPIOs in generated ACPI objects and a method to write a GpioIo() or GpioInt() descriptor to the SSDT. ACPI GPIOs have many possible configuration options and a structure is created to describe it accurately in ACPI terms. There are many shared descriptor fields between GpioIo() and GpioInt() so the same function can write both types. GpioInt shares many properties with ACPI Interrupts and the same types are re-used here where possible. One addition is that GpioInt can be configured to trigger on both low and high edge transitions. One descriptor can describe multiple GPIO pins (limited to 8 in this implementation) that all share configuration and controller and are used by the same device scope. Accurately referring to the GPIO controller that this pin is connected to requires the SoC/board to implement a function handler for acpi_gpio_path(), or for the caller to provide this directly as a string in the acpi_gpio->reference variable. This will get used by device drivers to describe their resources in the SSDT. Here is a sample for a Maxim 98357A I2S codec which has a GPIO for power and channel selection called "sdmode". chip.h: struct drivers_generic_max98357a_config { struct acpi_gpio sdmode_gpio; }; max98357a.c: void acpi_fill_ssdt_generator(struct device *dev) { struct drivers_generic_max98357a_config *config = dev->chip_info; ... acpi_device_write_gpio(&config->sdmode_gpio); ... } devicetree.cb: device pci 1f.3 on chip drivers/generic/max98357a register "sdmode_gpio" = "ACPI_GPIO_OUTPUT(GPP_C5)" device generic 0 on end end end SSDT.dsl: GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.PCI0.GPIO", 0, ResourceConsumer, ,) { 53 } Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Ibf5bab9c4bf6f21252373fb013e78f872550b167 Reviewed-on: https://review.coreboot.org/14934 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-28acpi_device: Add support for writing ACPI Interrupt descriptorsDuncan Laurie
Add definitions for ACPI device extended interrupts and a method to write an Interrupt() descriptor to the SSDT output stream. Interrupts are often tied together with other resources and some configuration items are shared (though not always compatibly) with other constructs like GPIOs and GPEs. These will get used by device drivers to write _CRS sections for devices into the SSDT. One usage is to include a "struct acpi_irq" inside a config struct for a device so it can be initialized based on settings in devicetree. Example usage: chip.h: struct drivers_i2c_generic_config { struct acpi_irq irq; }; generic.c: void acpi_fill_ssdt_generator(struct device *dev) { struct drivers_i2c_generic_config *config = dev->chip_info; ... acpi_device_write_interrupt(&config->irq); ... } devicetree.cb: device pci 15.0 on chip drivers/i2c/generic register "irq" = "IRQ_EDGE_LOW(GPP_E7_IRQ)" device i2c 10 on end end end SSDT.dsl: Interrupt (ResourceConsumer, Edge, ActiveLow, Exclusive,,,) { 31 } Change-Id: I3b64170cc2ebac178e7a17df479eda7670a42703 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14933 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-27soc/intel/apollolake: provide SMM dependency requirementsAaron Durbin
Depending on which options are selected there needs to be certain functions supplied. However, the spi, mmap_boot, and tsc_freq modules were not included in the SMM builds. Fix the omission. Change-Id: I25ab42886cfd46770ce0f4beee65f2f4d15649f3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14977 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-27mainboard/google/reef: increase BIOS region sizeAaron Durbin
An updated descriptor expands the BIOS region while descreasing the 'device expansion region' utilized by the CSE. Update the end region marker to reflect this new size as well as the chromeos.fmd file which needs to be adjusted for logical boot parition 2 requirement which resides halfway through the BIOS region. The GBB was moved and shunk to accommodate the change. Change-Id: I7baa5282d7c608af648b5773c4dfa123060a6e45 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14974 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-05-27google/reef: Sync chromeos.fmd with fmap.dts and fix offsetsFurquan Shaikh
CQ-DEPEND=CL:347460 BUG=chrome-os-partner:53689 BRANCH=None TEST="emerge-reef chromeos-bootimage" completes without error Change-Id: Ic954e29628423937604772a8d2d0414954e6ba3e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://chromium-review.googlesource.com/347441 Commit-Ready: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/14975 Tested-by: build bot (Jenkins)
2016-05-27mainboard/google/reef: support verstageAaron Durbin
The chromeos.c suport needs to be linked into verstage so it will link. Change-Id: If85e232a3721443edfbbd278b32f72302f13f3a8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14973 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-27soc/intel/apollolake: add support for verstageAaron Durbin
There previously was no support for building verstage on apollolake. Add that suport by linking in the appropriate modules as well as providing vboot_platform_is_resuming(). The link address for verstage is the same as FSP-M because they would never be in CAR along side each other. Additionally, program the ACPI I/O BAR and enable decoding so sleep state can be determined for early firmware verification. Change-Id: I1a0baab342ac55fd82dbed476abe0063787e3491 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14972 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-27arch/x86: provide verstage support for CONFIG_C_ENVIRONMENT_BOOTBLOCKAaron Durbin
When CONFIG_C_ENVIRONMENT_BOOTBLOCK is employed there's no need for a chipset specific verstage entry point because cache-as-ram has already been initialized. Therefore, provide a default entry point for verstage in that environment. Change-Id: Idd8f45bd58d3e5b251d1e38cca7ae794b8b77a28 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14971 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-05-26soc/intel/apollolake: Provide No Connect macro for unused PadJagadish Krishnamoorthy
Change-Id: Iba506054a3d631c8e538d44e1ca6877dd02c2ca9 Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/14956 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-26soc/intel/apollolake: enable RTCJagadish Krishnamoorthy
BUG=none TEST=Boot to OS and verfiy if rtc0 device is created under /sys/class/rtc/ Change-Id: Idec569255859816fda467bb42a215c00f7c0e16e Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/14883 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-26drivers/intel/fsp2_0: Send post codes around calls to the blobsAlexandru Gagniuc
By design, FSP will send POST codes to port 80. In this case we have both coreboot and FSP pushing post codes, which may make debugging harder. In order to get a clear picture of where FSP execution begins and ends, send post codes before and after any call to the FSP blobs. Note that sending a post code both before and after is mostly useful on chromeec enabled boards, where the EC console will provide a historic list of post codes. Change-Id: Icfd22b4f6d9e91b01138f97efd711d9204028eb1 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14951 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-26soc/apollolake: Use simpler macros for the northbridge PCI deviceAlexandru Gagniuc
The NB_DEV_ROOT macro, is almost unreadable, as it depends on other stringified macros, and acts differently depending on the coreboot stage. For ramstage, it also hides a function call. Rewrite the macro in terms of more basic and readable macros. Change-Id: I9b7071d67c8d58926e9b01fadaa239db1120448c Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14890 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-26soc/apollolake/memmap: Switch to SIMPLE_DEVICE APIAlexandru Gagniuc
memmap.c functionality is designed to be used in more than ramstage. Therefore, it cannot use ramstage-specific APIs. In this case, the SIMPLE_DEVICE API offers a more consistent behavior across stages. Change-Id: Ic381fe1eb773fb0a5fb5887eb67d2228d2f0817d Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14953 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-26mainboard/intel/amenia: Configure DDI0, DDI1 HPD GPIO lines.Abhay Kumar
1. Configure GPIO_199 and GPIO_200 as NF2 to work as HPD. 2. Make 20k Pullup and remove duplicate code. Change-Id: I8c78d867b03d5f2a6f02165c20777ae25e352ce7 Signed-off-by: Abhay Kumar <abhay.kumar@intel.com> Reviewed-on: https://review.coreboot.org/14899 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-26mainboard/intel/amenia: Disable Integrated Sensor HubHannah Williams
Providing an option to enable or disable ISH interface. Leaving it disabled for now. Change-Id: Id4e71d60a6c2da6c6c070d41f66f6c161de38595 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14895 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-26soc/apollolake: Add ish_enable in soc_intel_apollolake_configHannah Williams
Also initialize IshEnable in Silicon Init UPD with the value from devicetree.cb Signed-off-by: Hannah Williams <hannah.williams@intel.com> Change-Id: I8f57a7353471cc3efa21c7011cdd0b369d25275d Reviewed-on: https://review.coreboot.org/14894 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-25intel/amenia: Extend IFD size by 512 KBBora Guvendik
Increase BIOS region size by 512KB since device extension size is reduced from 1MB to 512KB BUG=chrome-os-partner:52589 TEST=Build Coreboot and boots CQ-DEPEND=CL:*259448,CL:345642,CL:*259445 Change-Id: Ib81b117a3afe730aafa54b4ef31b1e9ab1f67111 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/14929 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-25soc/apollolake: Enable Wake from USB devicesHannah Williams
Change-Id: Ib0b30a5779681488e80000a2570fc2fd4c69e908 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14893 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-25soc/apollolake: SOC specific SMM codeHannah Williams
Add SMI handlers that map to SOC specific SMI events Update relocation_handler in mp_ops Change-Id: Idefddaf41cf28240f5f8172b00462a7f893889e7 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14808 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-25soc/intel/common: Add common smihandler codeHannah Williams
Provide default handler for some SMI events. Provide the framework for extracting data from SMM Save State area for processors with SMM revision 30100 and 30101. The SOC specific code should initialize southbridge_smi with event handlers. For SMM Save state handling, SOC code should implement get_smm_save_state_ops which initializes the SOC specific ops for SMM Save State handling. Change-Id: I0aefb6dbb2b1cac5961f9e43f4752b5929235df3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14615 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-25vendorcode/google/chromeos/vboot2: use cbmem for postcar region selectionAaron Durbin
When the vboot cbfs selection runs in postcar stage it should be utilizing cbmem to locate the vboot selected region. Change-Id: I027ba19438468bd690d74ae55007393f051fde42 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14959 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>