summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2011-04-11Unify use of post_codeAlexandru Gagniuc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6487 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-11PMH7: Add chip configSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6486 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-11EC: Add Lenovo H8Sven Schnelle
Move the EC support code from the X60 mainboard to a generic driver, as this EC is used in many thinkpads. Also move the ACPI code to this directory for this reason. This patch also adds a chip config, so that the initial setting for basic register can be specified in devicetree.cb Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6485 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-10i945: improve get_top_of_ram()Sven Schnelle
The current version doesn't honor TSEG, and fails to report the correct top of RAM if IGD is disabled. This is because it uses the BSM (base of stolen RAM) register. In that case, we should use the TOLUD register. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6483 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-10In 2007 Adrian Reber suggested that we drop ASSEMBLY in favor of __ASSEMBLER__.Stefan Reinauer
http://www.coreboot.org/pipermail/coreboot/2007-September/024665.html It's about time we follow this advice. Also move some manually set __PRE_RAM__ defines (ap_romstage.c) to the Makefile and drop unused CPP define Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6482 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-05X60: use pnp_write_config() instead of custom functionSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6481 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-05X60: move ec version info code to log_ec_version()Sven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6480 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-04X60: assert audio mute before entering SuspendSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6479 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-04X60: log firmware versionSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6478 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-04X60: blink suspend LED during resumeSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6477 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-04X60: we have ACPI_RESUMESven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6476 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-04X60: deassert audio mute on bootSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6475 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-01remove swp files accidently addedSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6474 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-01X60: add dock code for Ultrabase X6Sven Schnelle
Move the old docking code from romstage.c to dock.c, and use that code both in romstage and SMM code. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6473 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-01Add GPIO definitions to PC87392 superioSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6472 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-01ICH7: Fix register naming errorSven Schnelle
There's an off-by-one error in the ACPI GP_LVL declaration: it declares GL00 with a bit count of 6, and continues with GP07 afterwards. This should be GP06, as the first bitfield covers GP00-GP05. While at it, change it to GP00-GP05, as right now GL00 isn't used, and single bitfield are more usable here. Also adjust the Getac P470, as this is the only user of those defintions right now. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6471 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-29BUILD: add missing config.h dependencySven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6467 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-28Add support for Supermicro H8scm.Zheng Bao
It is AMD C32 + SR5650 + SP5100. It is created by svn copy amd/tilapia_fam10. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6466 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-28Add the SR5650 & SP5100 to the Kconfig and Makefile.incZheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6465 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-28Add AMD C32 support.Zheng Bao
It is based on other existing Fam10 code. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6464 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-28SP5100's code is based on SB700. Change the legacy sb700 of sb7xx_51xx.Zheng Bao
Since the SB700 has changed to sb7xx_51xx, change legacy name in other mainboard. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6463 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-27Add AMD SR56x0 support.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6462 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-27This is for board Supermicro H8scm. The code was done by existing chips andZheng Bao
superiotool. WPCM450 is more like an EC. SuperIO is just a part of multi-features. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6461 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-21X60: Add notification for LID objectsSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6458 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-21X60: remove beep call from _Q26/_Q27Sven Schnelle
no need to trigger sound, the EC takes care of generating the annoying AC state beep if enabled in the sound mask. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6457 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-17Fix breaking the build after removing files in tthe previous checkin. Marc Jones
Signed-off-by: Marc Jones <marcj303@gmail.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6453 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-17Perform cleanup and file shrinkage of the AMD AGESA code.Frank.Vibrans
Signed-off-by: Frank.Vibrans <frank.vibrans@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6452 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-17Fix power_on_after_fail handling on AMD SB600Josef Kellermann
Bit 0 of pm reg#74 have to be set turn on system after power resumes. See '42661_sb600_rrg_nda_3.02.pdf' (or '46155_sb600_rrg_pub_3.03.pdf') for details, look for 'PwrFailShadow'. [Patrick: I didn't include the get_options reorganization as get_option doesn't overwrite "on" if power_on_after_fail isn't found in CMOS. Style changes were also left out.] Signed-off-by: Josef Kellermann <seppk@arcor.de> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6451 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-15X60: Clear EC events when wake GPE is triggeredSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6448 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-15ACPI EC: add ec_query functionSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6447 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-14X60: LPC bus is LPCB, not LPCSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6446 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-14X60: fix typo in dsdt.aslSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6445 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-14X60: Add _PRW/_PSW methods to LID/SLPB objectsSven Schnelle
This patch adds the required methods for enabling/disabling the LID and SLPB objects as wake source. On Thinkpads, the Fn key can (and is by the Vendor BIOS) programmed as Wake source, so let's do it the same way. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6444 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-14ec/acpi: make ACPI register pair configurableSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6442 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-14ACPI EC: add ec_set_bit() / ec_clr_bit()Sven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6441 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-08Enable mahogany_fam10 and Kino family 10h to run the SB HT link at the ↵Scott Duplichan
expected HT3 frequency and width by matching the BUID swap list to the production BIOS. In addition, the BUID swap list has been moved into the project-specific file romstage.c for the other 13 AMD family 10h projects as well. For projects using a desktop AMD family 10h processor, pasting in the mahogany_fam10 swap list will likely allow HT3 operation. This should be confirmed on real hardware before commiting any swap list change. A different swap list will be needed for server projects. For serengeti_cheetah_fam10, a reference BIOS swap list to try is: 0x00, 0x0A, 0x00, 0x06, 0xFF, 0x0A, 0x06, 0xFF. The patch makes these changes: 1) Remove the BUID swap list from ht_wrapper.c and put it in each of 15 romstage.c files where it is used (AMD family 10h projects). 2) Add a prototype to amdfam10.h. 3) Modify the swap list and test in real hardware for mahogany_fam10 and kino family 10h and confirm HT3 operation for the SB link. Abuild tested. Signed-off-by: Scott Duplichan <sc...@notabs.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6439 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-08Add option_table.h as dependency for all C based object files if option ↵Patrick Georgi
tables are used. This is to make sure that the file exists when it is needed. While this isn't the case for every C source file, it doesn't hurt either to create the file a bit sooner than strictly necessary. Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Jonathan Kollasch <jakllsch@kollasch.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6438 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-08Move cmos.default handling to bootblockPatrick Georgi
The cmos.default code wasn't actually used so far, due to an oversight when forward-porting this feature from an old branch. - Extend walkcbfs' use by factoring out the stage handling into C code. - New sanitize_cmos() function that looks if CMOS data is invalid and cmos.default exists and if so overwrites CMOS with cmos.default data. - Use sanitize_cmos() in both bootblock implementations. - Drop the need to reboot after writing CMOS: CMOS wasn't used so far, so we can go on without a reboot. - Remove the restriction that cmos.default only works on CAR boards. - Always build in cmos.default support on boards that USE_OPTION_TABLE. Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6436 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-07X60: add thermal zone 1Sven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6435 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-07X60: add thermal zone 0Sven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6434 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-04Add P-states for select Socket 754 processors.Jonathan Kollasch
States for AMA3000BEX5AR, SDA3100AIO3BX, and SDA3400AIO3BX are from AMD document 30430 3.51. States for ADA3200AIO4BX derived from SSDT of a MS-7135. States for TMDML34BKX5LD derived from legacy PowerNow! table of a MS-7135, and therefore lack accurate TDP information. Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6432 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-04Redo r6099 after copy&pasted code reintroduced DIMMx #definesPatrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6431 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-03Correct off-by-one problem in AMD pre-rev-F model-F PowerNow code.Jonathan Kollasch
With this change the last P-state entry of the last CPU in the table is successfully conveyed into the SSDT. Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6430 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-03Improve ck804 IOAPIC and HPET resource handling.Jonathan Kollasch
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6429 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-03Configure PCIe lanes on ms7135 as original BIOS does.jakllsch
Signed-off-by: <jakllsch@kollasch.net> Acked-by: <jakllsch@kollasch.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6428 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-03add PC87384 SuperIOSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6427 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-02Fixes licensing of src/southbridge/via/k8t890/k8x8xx.h to GPLv2+ from GPLv3.Alexandru Gagniuc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6426 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-01Fix some subsystemid statements in r6421Sylvain "ythier" Hitier
Signed-off-by: Sylvain "ythier" Hitier <sylvain.hitier@gmail.com> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6425 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-01Fix a simple whitespace error in src/include/device/device.hSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> Reported-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6423 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-01Use subsystem id from devicetree.cb instead of Kconfig and moveSven Schnelle
all boards to the new config scheme. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6421 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-01Add subsystemid option to sconfigSven Schnelle
Allow user to add 'subsystemid <vendor> <device> [inherit]' to devicetree.cb for PCI and PCI domain devices. Example: device pci 00.0 on subsystemid dead beef end If the user wants to have this ID inherited to all subdevices/functions, he can add 'inherit', like in the following example: device pci 00.0 on subsystemid dead beef inherit end If the user don't want to inherit a Subsystem for a single device, he can specify 'subsystemid 0 0' on this particular device. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6420 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-01Mark non-returning function as noreturn to help some compiler versionsPatrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6418 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28add functions to set Subsystem Vendor/Device to rl5c746Sven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6412 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. I don't understand what this was doing nor find docs for these regs Maybe it was left over from some copy & paste ? Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6411 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. I don't understand what this was doing nor find docs for these regs Maybe it was left over from some copy & paste ? Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6410 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. I don't understand what this was doing nor find docs for these regs Maybe it was left over from some copy & paste ? Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6409 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. In fact I changed coreDelay before deleting the code in fidvid that called it. But there're still a couple of calls from src/northbridge/amd/amdmct/wrappers/mcti_d.c Since the comment encouraged fixing something, I parametrized it with the delay time in microseconds and paranoically tried to avoid an overflow at pathological moments. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6408 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. bits 13 - 15 of F3xd4 (StutterScrubEn, CacheFlushImmOnAllHalt and MTC1eEn are reserved for revisions D0 and earlier, so whe should not set them to 0 in fidvid.c config_clk_power_ctrl_reg0(...), called from prep_fid_change. For revisions > D0 (when we support them) it is ok not ot clear them, because they are documented as 0 on reset. bit 12 should be left alone according to BKDG. Should I set 11:8 ClkRampHystSel to 0 in the mask too, just to indicate we're touching them ? We'll OR them to 1111 anyway... Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6407 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Well, I understand it better like this, but maybe it's only me, part of the changes are paranoic, and the only effective change is for a factor depending on mobile or not that I can't test. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6406 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Add an untested step in BKDG 2.4.2.8. I don't have the hardware with Core Performance Boost and I think it's only available in revision E that does not even have a constant yet. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6405 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Add to init_fidvid_stage2 some step mentioned in BKDG 2.4.2.7 that was missing . Some lines are dead code now, but may handy if one day we support revison E CPUs. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6404 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Add to init_fidvid_stage2 some step for my CPU (rev C3) mentioned in BKDG 2.4.2.6 (5) that was missing Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6403 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Looking at BKDG the process for updating Pstate Nb vid after warn reset seemed more similar to the codethat was there fo pvi than the one for svi, so I called the pvi function passing a pvi/svi flag. I don't find documentation on why should UpdateSinglePlaneNbVid() be called in PVI, but since I can't test it, I leave it as it was. This patch showed some progress beyond fidvid in my boar,d but only sometimes, most times it just didn't work. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6402 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Factor out some common expressions. Add an error message when coreboots hangs waiting for a pstate that never comes (it happened to me), and throw some paranoia at it for good mesure. If I understood BKDG fam10 CPUs never need a software initiated vid transition, because the hardware knows what to do when you just request a Pstate change if the cpu is properly configured. In fact unifying a little what PVI and SVI do was better for my board (SVI). So I drop transitionVid, which I didn't understand either (why did it have a case for PVI if it is never called for PVI ? Why did the PVI case distinguigh cpu or nb when PVI is theoretically single voltage plane ? ). Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6401 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Kino devicetree.cb SIO PNP devices were not matched up with theMarc Jones
actual SIO. This fixes the serial device being disabled during PNP init. Signed-off-by: Marc Jones <marcj303@gmail.com> Acked-by: Scott Duplichan <scott@notabs.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6400 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Contemplate the possibility of nbCofVidUpdate not being defined, trying to get closer to BKDG Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6399 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Configuration of F3x[84:80] was hardcoded for rev B. I change that for some code that checks for revision and configures according to BKDG. Unfinished but hopefully better than it was. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6398 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. BKDG says nbSynPtrAdj may also be 6 sometimes. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6397 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. I didn't understand quite why it did that iwth F3xA0 (Power Control Misc Register) so I moved Pll Lock time to rules in defaults.h and reimplemented F3xA0 programming. A later patch will remove a part I don't know what's mean to do. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6396 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Bring F3xD4 (Clock/Power Control Register 0) more in line with BKDG i more cases. It requires looking at the CPU package type so I add a function for that (in the wrong place?) and some new constants Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6395 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Prepare for next patches (Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode). No change of behaviour intended. Refactor FAM10 fidvid . Factor out the decision whether to update northbridge frequency and voltage because there was the same code in 3 places and so we can later modify it in one place. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6394 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-27Prepare for next patches (Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode). No change of behaviour intended. Refactor FAM10 fidvid . Factor out the decision whether to update northbridge frequency and voltage because there was the same code in 3 places and so we can later modify it in one place. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6393 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-27Prepare for next patches (Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode). No change of behaviour intended. Refactor FAM10 fidvid. Factor out a little common code. Also, our earlier config_clk_power_ctrl_reg0 was still too long and it'd get longer with forthcoming patches. We now take apart F3xD4[PowerStepUp,PowerStepDown] to its own function. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6392 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-27Prepare for next patches (Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode). No change of behaviour intended. Refactor FAM10 fidvid . prep_fid_change was already long and it'd get longer with forthcoming patches. We now take apart F3x[84:80], ACPI Power State Control Registers, to its own function. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6391 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-27Prepare for next patches (Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode). No change of behaviour intended. Refactor FAM10 fidvid . prep_fid_change was already long and it'd get longer with forthcoming patches. We now take apart F3xDC[NbsynPtrAdj], Northbridge/core synchronization FIFO pointer adjust, to its own function. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-27Prepare for next patches (Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode). No change of behaviour intended. Refactor FAM10 fidvid . prep_fid_change was already long and it'd get longer with forthcoming patches. We now take apart F3xA0, Power Control Misc Register to its own function. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6389 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-27Prepare for next patches (Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode). No change of behaviour intended. Refactor FAM10 fidvid . prep_fid_change was already long and it'd get longer with forthcoming patches. We now take apart F3xD4, Clock Power/Timing Control 0 to its own function. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6388 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-27Prepare for next patches (Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode). No change of behaviour intended. Refactor FAM10 fidvid . prep_fid_change was already long and it'd get longer with forthcoming patches. We now take apart VSRamp in step b of 2.4.1.7 BKDG to its own function. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6387 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-27Add 300 MHz and 500 MHz HT frequency limitsXavi Drudis Ferran
Needed to build successfully with Expert mode enabled. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6386 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-26Make AMD Fam10h CPU microcode updates optional in Expert modeXavi Drudis Ferran
Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6385 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-26Following patch fills in the callbacks for PCIe x16 resets. This board uses ↵Rudolf Marek
GPM8,GPM9 as reset toggles. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6384 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-26Correct error in ASRock E350M1 commit that breaks build for ASRock 939a785gmh.Scott Duplichan
Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6383 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-26Add support for the ASRock E350M1, an AMD family 14h Fusion board.Scott Duplichan
A video option rom must be added for UMA graphics support. It can be extracted from the supplied UEFI BIOS. ASRock E350M1 support is based on the AMD persimmon project. The major differences are SIO model and DIMM SDP addressing. With this coreboot and seabios, the board can boot DOS from a SATA drive and can boot WinPE from a USB flash drive. I was unable to get Windows setup to run. The board has a socketed SPI flash BIOS chip and a serial port header. The SIO is Nuvoton NCT5572D. Using coreboot's existing Winbond w83627hf is a good enough match to get the serial port and keyboard working. Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Peter Stuge <peter@stuge.se> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6382 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-26It adds support for automatic PSS object generation for AMD pre fam Fh CPU. ↵Rudolf Marek
Those CPUs require a hardcoded table, which I managed to rewrite during one particularly boring flight. Too pity it is only for Opteron CPUs. Someone needs to finish the second PDF for All others Athlons and Semprons. Also it enables the FID/VID changes in SB. Jakllsch had some troubles with that too but on am2 CPU. Those bits are only documented in SB600. They arent in RRG RPR and BDG. Signed-off-by: Rudolf Marek <r.marek@asssembler.cz> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-24Add compile-time defaults to some K8 CMOS options in case they're absent in CMOSJosef Kellermann
This affects the CMOS options iommu, ECC_memory, max_mem_clock, hw_scrubber, interleave_chip_selects. If they're absent in cmos.layout, a Kconfig value is used if it exists, or a hardcoded default otherwise. [Patrick: I changed the ramstage CMOS handling a bit, and dropped the reliance of hw_scrubber on ECC RAM, as it has nothing to do with it - it's the cache that's being scrubbed here.] Signed-off-by: Josef Kellermann <seppk@arcor.de> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6380 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-24Add new option 'sata_mode' to CMOS and 'SATA_MODE' to Kconfig for AMD SB600Josef Kellermann
coreboot used to set the chipset to IDE mode unconditionally. Now, the user has a couple of ways to choose the configuration: - If a CMOS variable sata_mode exist, it is used to decide if IDE or AHCI is to be used as interface. - If not, a Kconfig option is used. - If unchanged, the Kconfig option is set to IDE. So unless the cmos.layout is extended or Kconfig is modified, this won't change behaviour. [Patrick: Compared to Josef's version, I changed the Kconfig option to be boolean, instead of a magic string. Also, the "IDE" default is handled in Kconfig, instead of an additional line of code.] Signed-off-by: Josef Kellermann <seppk@arcor.de> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6379 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-24Tyan/s2735 doesn't need to define its own hard_reset function anymore.Patrick Georgi
The southbridge already provides hard_reset. Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6378 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-24git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6376 ↵Scott Duplichan
2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-21[i945] Add SPD adress mappingSven Schnelle
The current code works only with dual channel if Channel 0 uses SPD address 0x50/0x51, while the second channel has to use 0x52/0x53. For hardware that uses other addresses (like the ThinkPad X60) this means we get only one module running instead of both. This patch adds a second parameter to sdram_initialize, which is an array with 2 * DIMM_SOCKETS members. It should contain the SPD addresses for every single DIMM socket. If NULL is given as the second parameter, the code uses the old addressing scheme. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6374 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-19It turns out that the code which enables specific LDN is somewhat buggy.Rudolf Marek
Instead of enable the device the device gets disabled. However after some time the serial line gets back, most likely some "enable resources" might fix it. I'm attaching patch which somewhat fixes the problem and changes the function to look same in all superio code. Some boards even did not convert the dev->enabled to 0,1 values. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6373 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-16Fix build errors introduced in r6367Alexandru Gagniuc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6369 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-16Add ACPI code for Lenvo X60Sven Schnelle
It currently supports: - Sleepbutton - AC state - Battery state - Interrupt routing - Display Brightness control - Hotkeys Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6368 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-16Extended K8T890 driver to include the K8T800 and K8M800 northbridgesAlexandru Gagniuc
The K8T800 is almost identical to the K8T800Pro, also added to this patch. The K8T800_OLD is also defined, which is an older version of the K8T800, but which has no driver and early HT code yet. Also extended the K8M890 VGA driver to work for the K8M800 (not tested). According to the datasheet, the K8T890 and K8T800 are similar enough to be able to use the same initialization code. At least for the K8T800, this is sufficient to have a working HT link with the CPU, and to initialise the V-Link to the southbridge. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6367 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-16Lenovo ThinkPad X60: Enable SMI handlerSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6366 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-15Remove more files and lines mistakenly copied from Roda to X60Peter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6365 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-15Remove ACPI mistakenly copied from Roda to ThinkPad X60Peter Stuge
It is incorrect, and will be replaced with proper ACPI for X60. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6364 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-15Remove Inagua Kconfig items for external VGA and AHCI binaries. These can be ↵Marc Jones
addded by the developer if needed. Fixes abuild issues. Signed-off-by: Marc Jones <marcj303@gmail.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6363 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-15SERIAL_POST was renamed to CONSOLE_POST a while agoStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6362 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14Lenovo ThinkPad X60 / X60s SupportSven Schnelle
Adds support for Lenovo X60 series ThinkPads. So far, only X60s (Model 1703) has been tested. It's a basic patch without SMI and ACPI, as this makes it easier to review. SMI and ACPI patches will follow. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6360 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14Errata #169 works on HT, not MCJosef Kellermann
Signed-off-by: Josef Kellermann <seppk@arcor.de> Acked-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6355 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 14:31:00 +0000