summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2017-10-12soc/intel/skylake: Enable bus master for sataKane Chen
The bus master needs to be enabled so that the busy bit in AHCI PORT_TFDATA will be cleared by controller when depthcharge tries to wait for sata to complete spin-up during AHCI init. Otherwise, the timeout will happen and cause 5 seconds delay in depthcharge. BUG=b:37639063 BRANCH=none TEST=verify that the sata timeout is gone in depthcharge Change-Id: I19eadbb2943fda8a5babc82ca87b1ecaab5e2ed8 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/21890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-10-11mainboard/google/kahlee: Add EC_IN_RW flagMartin Roth
Depthcharge was complaining that the GPIO for this flag wasn't set. The GPIO also needs to be an input, not an output. BUG=b:67614692 TEST=Depthcharge no longer complains that there is no GPIO set for flag5. The system boots again. Change-Id: Ib854e97b0a3aa42a95ceb8a42a9776f0345ff8b1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-11soc/intel/cannonlake: Change default UART number to 2Lijian Zhao
Set default UART number to 2 if 32bit PCI got selected, the proper debug print can be seen from serial port in case of switch between platforms, especially when change to lpss uart from legacy uart or vise versa. Change-Id: If2e0e8c8ac86e49a245f3d1d4722d40be9c01e25 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21544 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-11mainboard/google/fizz: Enable Devslp for SATA port 1Gaggery Tsai
This patch is to enable the support of device sleep for SATA port 1 and disable unused SATA port 0. BUG=b:65808359 BRANCH=None TEST=Ran "suspend_stress_test -c 2500" and passed the test. Change-Id: I33b8f5fd0c51d83e154ef7daac3274ff377bc8b3 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/21765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Shelley Chen <shchen@google.com>
2017-10-10vboot: use cbfstool truncatePatrick Georgi
Instead of a shell based parser for cbfstool print -k output. BUG=b:65853903 BRANCH=none TEST=`abuild -x -t GOOGLE_KEVIN -p none` creates a valid-looking image. Change-Id: I33b7e1c483a69e66e82541c09582be2a71356a10 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-10-10soc/intel/skylake: Fix broken suspend/resume for deep S3Furquan Shaikh
Change d3476809 (soc/intel/skylake: Add support in SKL for PMC common code) changed the logic for obtaining previous sleep state by unconditionally checking for PWR_FLR and SUS_PWR_FLR. In case of deep S3, SUS_PWR_FLR is set in gen_pmcon_b (just like resume from deep S5/G3) and hence the check for power failure should be done only when WAK_STS bit is not set. This is necessary to differentiate wakes from deep S3 and G3. This change restores the original logic by performing power failure check only in cases where WAK_STS bit is not set. BUG=b:67617726 TEST=Verified following: 1. When WAK_STS bit is not set and SUS_PWR_FLR is set, coreboot correctly identifies that the system prev sleep state was S5. 2. When WAK_STS bit is set and SUS_PWR_FLR is set, coreboot correctly identifies that the system prev sleep state was S3. Change-Id: Ic97bbc9911ba34aa21f4728c77fc20c5bb08f6f9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-10mb/google/poppy/variants/nautilus: add nautilus boardChris Wang
Create Nautilus board which derives from Poppy, a KBL reference board. BRANCH=master BUG=b:66462881 TEST=Build (as initial setup) Change-Id: I6ca5ab821a7ba1746b37dfd3ea1ed367094d4f52 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/21895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-10-10ec/lenovo/h8: Serialize control method _CRSPaul Menzel
``` dsdt.aml 1461: Method (_CRS, 0) Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within) ``` Change-Id: Iaf9455b16b061b32248139a85890f49de7467261 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/21921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-10-09skylake mainboards: Use PAD_CFG_GPI_GPIO_DRIVER instead of PAD_CFG_GPIFurquan Shaikh
Change 1760cd3e (soc/intel/skylake: Use common/block/gpio) updated all skylake boards to use common gpio driver. Common gpio code defines PAD_CFG_GPI without GPIO_DRIVER ownership. However, for skylake PAD_CFG_GPI set GPIO_DRIVER ownership by default. This resulted in Linux kernel failing to configure all GPIO IRQs since the ownership was not set correctly. (Observed error in dmesg: "genirq: Setting trigger mode 3 for irq 201 failed (intel_gpio_irq_type+0x0/0x110)") This change fixes the above issue by replacing all uses of PAD_CFG_GPI in skylake mainboards to PAD_CFG_GPI_GPIO_DRIVER. BUG=b:67507004 TEST=Verified on soraka that the genirq error is no longer observed in dmesg. Also, cat /proc/interrupts has the interrupts configured correctly. Change-Id: I7dab302f372e56864432100a56462b92d43060ee Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-09mainboard/intel/cannonlake_rvp: enable NVMe SSDBora Guvendik
Turn on PCIe express port 9 of PCIe controller 3, to enable NVMe SSD via M.2 socket 3 on RVP board. TEST=Boot to OS using Intel NVMe SSD Pro 6 Change-Id: I2fd1cdcf2d9718bf2042262b0c9813811a706b4a Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/21908 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-09soc/intel/*lake: Load vbt when it's neededPatrick Georgi
That removes the need for another global variable. Change-Id: I25e12ba724836de4c8afb25cd347cafe6df8cea9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21907 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-08google/cyan: fix variant memory/silicon init params overrideMatt DeVillier
The mainboard_memory_init_params() and mainboard_silicon_init_params() methods already have weak definitions in drivers/intel/fsp1_1, so having them declared as weak in the cyan baseboard has the effect of them not being called at all unless overridden at the variant level. Therefore, remove the weak declarations in the baseboard and ensure that each variant has its own init functions if needed. TEST: build/boot google/cyan Change-Id: I1c76cb5838ef1e65e72c7341d951f9baf2ddd41b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-10-08mb/google/poppy/variants/soraka: Add 10ms reset delay for WCOM deviceFurquan Shaikh
Change 868b3761 (mainboard/google/soraka: Reduce Wacom resume time) removed the delay after taking device out of reset since it seemed unnecessary in system resume case (because there is enough time after taking device out of reset and before communication with device starts). However, without the delay, kernel driver runs into issue while talking to the device during boot-up and runtime suspend/resume. (Observed this error in dmesg: "i2c_hid i2c-WCOMCOHO:00: failed to change power setting."). Thus, add 10ms delay after taking device out of reset. Verified on multiple Soraka system that with 10ms delay, kernel driver does not run into any issue talking to the WCOM device during boot-up, runtime suspend/resume and system suspend/resume. BUG=b:65358919 TEST=No more errors talking to WCOM device in kernel dmesg. Change-Id: I485b753cbae4b653e74337e048aea4d26ffdbb81 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Rajat Jain <rajatja@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-08ec/google/chromeec: Add library function google_chromeec_events_initFurquan Shaikh
mainboard_ec_init implemented by all x86-based mainboards using chromeec performed similar tasks for initializing and recording ec events. Instead of duplicating this code across multiple boards, provide a library function google_chromeec_events_init that can be called by mainboard with appropriate inputs to perform the required actions. This change also adds a new structure google_chromeec_event_info to allow mainboards to provide information required by the library function to handle different event masks. Also, google_chromeec_log_device_events and google_chromeec_log_events no longer need to be exported. Change-Id: I1cbc24e3e1a31aed35d8527f90ed16ed15ccaa86 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-10-06google/zoombini: adapt to schematic changesNick Vaccaro
Adapt code to latest schematic changes, revision 1.1. Configure GPD2 for EC_PCH_WAKE_ODL, GPP_D5 for EC_I2C_SENSOR_SDA, GPP_D6 for EC_I2C_SENSOR_SCL, GPP_D7 for WWAN_SAR_INT_ODL, GPP_D9 for touchscreen power enable, GPP_D10 for wifi power enable, GPP_D11 for wwan power enable, GPP_D13 change to "No Connect" (was VOL_UP_ODL), GPP_D14 change to "No Connect" (was VOL_DOWN_ODL). BUG=b:66265441 BRANCH=None TEST=None Change-Id: Ic9e76ed3e958c1f96deb6356d6480c6ba7cfe699 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/21900 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-06soc/intel/skylake: use locate_vbt directly instead of calling a wrapperPatrick Georgi
Change-Id: I65c423660ab1778f5dd9243e428a4d005bd1699a Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-06soc/intel/common: refactor locate_vbt and vbt_getPatrick Georgi
Instead of having all callers provide a region_device just for the purpose of reading vbt.bin, let locate_vbt handle its entire life cycle, simplifying the VBT access API. Change-Id: Ib85e55164e217050b67674d020d17b2edf5ad14d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21897 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-06soc/intel/common: refactor locate_vbtPatrick Georgi
All callers of locate_vbt just care about the file content and immediately map the rdev for its content. Instead of repeating this in all call sites, move that code to locate_vbt. Change-Id: I5b518e6c959437bd8f393269db7955358a786719 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-06mainboard/google/reef: Override VBT selection in coralPatrick Georgi
Change-Id: I7fd667b1cf0b7c2a5e4ab7ac7748d9636a52ae54 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21725 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-06soc/intel/common: Allow overriding CBFS filename of VBTPatrick Georgi
When reusing the same image across multiple devices, they sometimes need different VBTs, so provide a hook for mainboard code to specify which file is required. Change-Id: Ic7865dc0e0c9ea3077b749d9d0482079877e9c4f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21724 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-06soc/intel/cannonlake: Enable MRC cacheLijian Zhao
Enable MRC cache by default. TEST=Warm reset and check coreboot serial log, MRC related log can be seen. Change-Id: I76ece361867737c01cc848c24d8893d43a3d292e Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-06soc/intel/cannonlake: reduce bootblock sizeAaron Durbin
Reduce the bootblock size to 16KiB from the default 64KiB. Not all that space is necessary. Change-Id: I5c15d0af0f85282b84c8983f0a015aeb45c00a07 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-10-06soc/intel/common: remove invalid path from Kconfig includeAaron Durbin
The src/soc/intel/common/basecode/Kconfig path does not exist. Remove the inclusion of the invalid path. Change-Id: Icbd8f310cad4246b72bc869bcf4a089ae2f0c5a3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-10-06AGESA f16kb: Enable MRC cache equivalent fastbootKyösti Mälkki
Try restoring previous memory training results from SPI flash to improve raminit speed. Change-Id: I6f4c2342e2eea6c1ecfb71da8564225b6230f51e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-05drivers/intel/fsp2_0: use common code to fetch vbt.binPatrick Georgi
No need for having two of everything in the coreboot codebase. Change-Id: Ie1cdd1783dd5dababd1e97436a4ce1a4f068d5b3 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-05soc/intel/cannonlake: Add all the SOC level DSDT tablesLijian Zhao
Add all the SOC level DSDT tables, reference from skylake/kabylake. Change-Id: Ia72bbe87b32d37db01f8768bd8447cb6ee1567a9 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-05soc/intel/skylake: Add support in SKL for PMC common codeShaunak Saha
Change-Id: I3742f9c22d990edd918713155ae0bb1853663b6f Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/20499 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-05soc/intel/common/block: Manage power state variable from common PMC blockShaunak Saha
This patch helps managing power state variables from within the library. Adds migrate_power_state which migrates the chipset power state variable, reads global power variable and adds it in cbmem for future use. This also adds get_soc_power_state_values function which returns the power state variable from cbmem or global power state variable if cbmem is not populated yet. Change-Id: If65341c1492e3a35a1a927100e0d893f923b9e68 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/21851 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-05soc/amd/stoneyridge: Pass firmware dir location to amdfwtoolMartin Roth
The amdfwtool now outputs firmware that is correctly built for the new location. BUG=b:65484600 TEST=Assign PSP firmware location, build & test. Change-Id: Ifa2e99ea031fc0d9f165ae44ff6b1afef369eb28 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-05src/mainboard/Kconfig: Add support for 10240 KiB ROM chipsJonathan Neuschäfer
The Dell Optiplex 790 desktop board has a logical 10MiB flash, so it needs to select BOARD_ROMSIZE_KB_10240. Provide it, so it can be used. Change-Id: I6365b0cda67fa1213c20337890157e5d658094d1 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-10-05soc/intel/{common,apollolake}: Add checks to handle negative valuesRizwan Qureshi
Fix issues reported by coverity scan in the below files. src/soc/intel/common/block/i2c 1375440: Improper use of negative value 1375441: Improper use of negative value 1375444: Improper use of negative value src/soc/intel/apollolake/i2c.c 1375442: Unsigned compared against 0 Change-Id: Ic65400c934631e3dcd3aa664c24cb451616e7f4d Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-05soc/intel/skylake: Add config for mbx command for Intersil VR C-state issuesRizwan Qureshi
Config for activating VR mailbox command for Intersil VR C-state issues. 0 - no mailbox command sent. 1 - VR mailbox command sent for IA/GT rails only. 2 - VR mailbox command sent for IA/GT/SA rails. BUG=b:65499724 BRANCH=none TEST= build and boot soraka. Change-Id: Ibcced31b7ba473ffa7368c90c945d07a81a368d4 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21680 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-05vendor/intel/skykabylake: Update FSP header files to version 2.7.2Balaji Manigandan B
Update FSP header files to version 2.7.2. New UPDs added FspmUpd.h: *CleanMemory FspsUpd.h: *IslVrCmd *ThreeStrikeCounterDisable Structure member names used to specify memory configuration to MRC have been updated, SoC side romstage code is updated to handle this change. CQ-DEPEND=CL:*460573,CL:*460612,CL:*460592 BUG=b:65499724 BRANCH=None TEST= Build and boot soraka, basic sanity check and suspend resume checks. Change-Id: Ia4eca011bc9a3b1a50e49d6d86a09d05a0cbf151 Signed-off-by: Balaji Manigandan B <balaji.manigandan@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-10-05mb/google/reef: Cache EC's SKU ID on CoralPatrick Georgi
Change-Id: I1925f51d63290b8d08366b622d5df3aab3a7484e Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21737 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-10-05AGESA vendorcode: Add ENABLE_MRC_CACHE optionKyösti Mälkki
When selected, try to store and restore memory training results from/to SPI flash. This change only pulls in the required parts from vendorcode for the build. Change-Id: I12880237be494c71e1d4836abd2d4b714ba87762 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-05AGESA: Re-enable HAVE_ACPI_RESUMEKyösti Mälkki
Note: For some of the boards affected ACPI S3 support was never tested but feature was just copy-paste from reference design. Change-Id: I2a54d605fa267a7501f57efd79a16b3bfa49891e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Damien Zammit <damien@zamaudio.com>
2017-10-04google/fizz: Configure GPP_C23 earlyDaisuke Nojiri
GPP_C23 is read by vboot_handoff to set the WP flag. Thus, it has to be configured in early_gpio_table. BUG=b:67030973 BRANCH=none TEST=Verify by wpsw_boot and wpsw_cur match. Change-Id: I96f2b53d7bc0901ffccce46b2d8ddae80c002fdc Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/21876 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-04chromeec: Remove checks for EC in RODaisuke Nojiri
This patch removes checks that ensure EC to be in RO for recovery boot. We do not need these checks because when recovery is requested automatically (as opposed to manually), we show 'broken' screen where users can only reboot the device or request recovery manually. If recovery is requested, Depthcharge will check whether EC is in RO or not and recovery switch was pressed or not. If it's a legitimate manual recovery, EC should be in RO. Thus, we can trust the recovery button state it reports. This patch removes all calls to google_chromeec_check_ec_image, which is called to avoid duplicate memory training when recovery is requested but EC is in RW. BUG=b:66516882 BRANCH=none CQ-DEPEND=CL:693008 TEST=Boot Fizz. Change-Id: I45a874b73c46ea88cb831485757d194faa9f4c99 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/21711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-04intel/fsp: Update cannonlake FSP headerLijian Zhao
Update FSP header file to latest version, cannonlake reference code 7.0.14.11. Details of FSP changes can be find in FSP release notes. Change-Id: Iac8db8403b0f909f32049329f867c28c68e3b830 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-04mb/asus/kcma-d8,kgde-d16: Don't select SPI_FLASH_WINBONDArthur Heymans
The default for SPI_FLASH_INCLUDE_ALL_DRIVERS is y which already includes this. Change-Id: Ib2de0f384a547240528b18f07327566354164699 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-10-04soc/amd/stoneyridge: Drop some amdlib.h includesKyösti Mälkki
Change-Id: Ief00a74a9ab4cb6783ea17cebc924b5c4852f228 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-10-03soc/intel/cannonlake: change gpio device nameBora Guvendik
TEST=Boot to OS Change-Id: Iace5dc748435b48b50faae6f60a10f1f7ae058ff Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/21758 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-03mainboard/google/soraka: Reduce Wacom resume timeRajneesh Bhardwaj
Currently the WCOMCOHO registers a reset delay of 110ms to execute their _ON_ asl power on method. This seems to be correct as per WACOM product design specifications but it introduces an unwanted delay in overall system resume time. This delay should be removed from ACPI critical path since the entire kernel resume gets blocked on this sleep call unless this is over. In the kernel I2C communication with WACOM driver starts with the resume callbacks of I2C HID driver which gets triggered after display is completely resumed. The display resume process takes at least 230ms so it's safe to reduce the delay from coreboot and unblock the critical ACPI path. BUG=b:65358919 BRANCH=None TEST=manual testing on Soraka board to ensure that touchscreen works at boot and after suspend/resume. Also verify that the overall S3 resume time is reduced by 110ms. Change-Id: I59d070977a95316414018af69d5b43e3147ccf4e Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Reviewed-on: https://review.coreboot.org/21692 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-10-03soc/intel/cannonlake: Disable CPU ratio overrideLijian Zhao
Disable CPU Ratio override as input to FSP Memory init. Change-Id: I4a1df15c619038f17c1bef5b7f53d322e352c56b Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-03soc/intel/cannonlake: add initial ASL methods for SCS, GPIOBora Guvendik
Add ACPI methods for gpio, scs and pcr. TEST=Boot to OS. Change-Id: I0dc31662dd3f5dbb3bda43aa8cf507128facde51 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/21685 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-03soc/intel/cannonlake: Add northbridge dsdt tableLijian Zhao
Add ACPI dsdt table for northbridge, report proper resources in dsdt entries. TEST=Boot up into OS fine. Change-Id: I382d87da087ae7828eaa7ff28bc9597a332ca5bc Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-03mainboard/intel/cannonlake_rvp: Add smi support in boardLijian Zhao
Include SMI Handler support for Cannonlake RVP platform. Change-Id: I8f363e20a6eb92b3c05e16715aa052a8da18b509 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-03soc/intel/cannonlake: Fill the SMI usageLijian Zhao
Add SMM support for Cannonlake on top of common SMM, also include the SMM relocate support. Change-Id: I9aab141c528709b30804d327804c4031c59fcfff Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-03soc/intel/cannonlake: Add lpc pci driverLijian Zhao
1.Add common ITSS support as part of LPC driver init code. 2.Add LPC pci driver for CNL Change-Id: I6c810fd7158e1498664b77eecae22132e2f6878f Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-03soc/intel/skylake: Enable common LPC IPRavi Sarawadi
Enable Skylake to use the new common LPC code. This will help to reduce code duplication and streamline code bring up. Change-Id: I042e459fb7c07f024a7f6a5fe7da13eb5f0dd688 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/20120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-03soc/intel/common/block: Update LPC libRavi Sarawadi
Add support for following functionality: 1. Set up PCH LPC interrupt routing. 2. Set up generic IO decoder range settings. 3. Enable CLKRUN_EN for power gating LPC. Change-Id: Ib9359765f7293210044b411db49163df0418070a Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/21605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-03vc/amd/pi/00670F00: Remove HeapXXBuffer functionsMartin Roth
The HeapAllocateBuffer and HEAPDeallocateBuffer functions are not used in Stoney Ridge, so get rid of them. Change-Id: I716d5c8957ced52c25fd501697111b1b0b263467 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-10-03soc/amd/stoney: Allow alternative placement for AMD FW directoryMartin Roth
Allow the AMD FW directory to be placed at one of the alternative locations within the ROM. BUG=b:65484600 TEST=Assign PSP firmware location, build & test. Change-Id: I9c95b9805c60ab6204750f7929049c7382e0c6cd Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-10-03nb/intel/gm45: Remove UMA alignment optimizationNico Huber
This code path was only triggered in one corner case: GFX UMA set to 48MiB. It created a hole below UMA to save MTRRs. But, this hole was never accounted for when calculating cbmem_top(). Instead of trying to fix it, remove it, it's not worth the trouble. TEST=Booted lenovo/x200 with all available CMOS gfx_uma_size settings. Change-Id: I3f4ceec4224d86113be9bfa3ce4759bed584640d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/21847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-10-03soc/amd/stoneyridge: Wait for UART to be readyMarc Jones
The Stoney Ridge UART and AMBA devices must be powered and report power and clock OK prior to using the coreboot serial console. The code used to have a delay to wait for the power and clock, but didn't check the OK bits. This caused long delays on a reboot, as each byte would time out until the console was reset again at romstage. This change also removes the UART reset. The device has just been powered and is in reset already. Testing indicates the reset isn't needed. BUG=b:65853981 TEST=Boot to Chrome OS, run the reboot command, verify that the long delay is gone. Change-Id: I410700df5df255d20b8e5d192c72241dd44cf676 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/21731 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-03vendorcode/amd/pi: Put libagesa build all in libagesa directoryMartin Roth
Half the files were being placed in build/agesa and half in build/libagesa. Change-Id: Ied69dafffe2eb3354bd430789e098a1cb1d40551 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-03nb/intel/sandybridge: Refactor dram_dimm_mapping()Nico Huber
Remove no-op statements and code-rephrasing comments, apply some cosmetic changes to improve readability. Change-Id: I124a6bc338c2589fab66ca91bf53139b4413d10b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/21823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-10-02binaryPI: Fix boot regressionsKyösti Mälkki
Fix boot regression after commit d4955f0 AGESA: Move API interface under drivers/ Boards were left without cache-as-ram setup code and appeared completely dead. Change-Id: I53a58b817310e91566db3fd660a2c41556f3df5f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Piotr Król <piotr.krol@3mdeb.com>
2017-10-02amd/stoneyridge: Remove 16MB cbmem assertMarshall Dawson
Do not check for the top of memory being 16MB-aligned near the end of romstage. This is not the expected alignment using the default 8MB SMM region size. BUG=b:67320715 Change-Id: I6bf0b9141232dea1a3b02794fda7af08887df119 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21850 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-02soc/intel/common/block: Move power button SMI functions to common PMC blockShaunak Saha
This patch moves the functions update_pm1_enable and read_pm1_enable to common block PMC. We rename the functions to pmc_update_pm1_enable and pmc_read_pm1_enable to keep semantics consistent. Change-Id: I9a73a6348fc22367ee2e68bf2c31823ebfefc525 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/21755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-02soc/intel/skylake: Use common/block/gpioHannah Williams
Other than switch to use common gpio implementation for skylake based platform, also apply the needed changes for purism board. Change-Id: I06e06dbcb6d0d6fe277dfad57b82aca51f94b099 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/19201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Youness Alaoui <snifikino@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-02amd/stoneyridge: Change SMM setup functionsMarshall Dawson
Remove the APMC-specific initialization call. Make the function which programs the event type not static and call it from the southbridge.c file. Change-Id: I1e3cf898637720fa835de0a6e735c6a65fe2d3a2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-02amd/stoneyridge: Add PM defintions to southbridge.hMarshall Dawson
Change-Id: I2534ab34f8a8d151e80004ee05d3061f013316b0 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21747 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-02amd/stoneyridge: Refactor SMI handlerMarshall Dawson
Rewrite the handler to be more compact and extendable. The old functionality is duplicated after the rewrite. All SMI source registers (except for SmiSciStatus) behave identically so these are consolidated. Register 0x80 contains sources 0-31, 0x81 sources 32-63, and so on. Create a table of mini-handlers to be supported in the soc directory. As SMI sources are discovered, attempt to find the corresponding handler and then execute it. Change-Id: Ic7050ecf65c2af036fe297f429a0bbdc709ad4c1 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21746 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-02amd/stoneyridge: Clean up smihandler.cMarshall Dawson
Replace hardcoded values with defined ones. Change-Id: Ic72a51516a1763b2380e60397f5a3aeb32457b65 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-02amd/stoneyridge: Check SMI command address before readingMarshall Dawson
Use the currently programmed address of the SMI command port before checking the passed command. This ensures we're reading the right port in case the port was relocated without our knowledge. Change-Id: I8a3ca285d3a9afd4a107cd471c202abf03f372ac Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-02amd/stoneyridge: Move pm/smi_read/write functions to util fileMarshall Dawson
Pull all pm_read and write, smi_read and write variants into a single file. Change-Id: I87d17361f923a60c95ab66e150445a6a0431b772 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-02amd/stoneyridge: Add pm_read32 and pm_write32 to southbridgeMarshall Dawson
Duplicate existing pm_read and pm_write and create 32-bit register access functions. Change-Id: I916130a229dc7cef8dae1faf00a38501d3939979 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21749 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-02amd/stoneyridge: Fix pm_read16 argument sizeMarshall Dawson
Make pm_read16() consistent with the other PM register access functions. Change-Id: Iba017b8090ed07d8684cc7f396a3e9a942b3ad95 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21748 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-02amd/stoneyridge: Clean up smi_util.cMarshall Dawson
Replace hardcoded values with defined ones. Change-Id: If963a817a4bea9b6dbb0d41a2bc0789a44a01391 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-02amd/stoneyridge: Add more SMM definitionsMarshall Dawson
Change-Id: I4c8069a18ea430ec6e66d41879c8e77f1ef2b340 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-02amd/stoneyridge: Add uart.c to smm-y listMarshall Dawson
This corrects a build error when a developer needs DEBUG_SMM and one of the APU's internal UARTs is used. Change-Id: Ie1962e969a8cb93eefc0b86bf4062752580e5acd Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21740 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-02google/gru: Fix pmu1833_volsel handlingJulius Werner
RK3399 has a pin that can decide whether GPIO port 1 is driven with 1.8V or 3.0V. We thought this mechanism was disabled by default, but it turns out it wasn't. We want to use that pin as an output GPIO on Scarlet so we need to reconfigure the respective SoC controls before we do that. It seems that we also need to explicitly pinmux the pin away from that special function (to normal GPIO) or weird things happen on some boards. BUG=b:66534913 TEST=Sprinkled several long udelays, poked test points with a multi-meter on Scarlet. Change-Id: Ia02cbb4f3b2f14b0d958b84adcddb0c5f4259efa Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/21727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-02mainboard/amd: Add required callouts to Stoney BiosCallouts.cMartin Roth
Hook the new required AGESA callout functions into the callouts tables. BUG=b:66690176 TEST=Build and boot Kahlee - see the functions get called. Change-Id: Ife9c2b20e59ede404edb1f700238e425fea35914 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-02soc/amd/common: Add framework for missing AGESA calloutsMartin Roth
These are required callout functions that currently are not implemented. agesa_LateRunApTask does not seem to be called, but the others are. BUG=b:66690176 TEST=Build Kahlee. Tested in next commit. Change-Id: Iee5f9c4847a5309a25045fca8c73be4f811c281a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21707 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-02google/fizz: Enable wake-on-usb attach/detachShelley Chen
BUG=b:62095784, b:35775024 BRANCH=None TEST=Run powerd_dbus_suspend from kernel. Plug in usb device and make sure wakes up. Change-Id: I214d6557998bdaf1d327c2a45532461b95d56a96 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/20421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-02cpu/x86: Align stack in SIPI handlerMarshall Dawson
Ensure the stack is properly aligned in the SIPI handler. This avoids an exception when an aligned instruction is performed on stack data. BUG=b:66003093 TEST=boot kahlee built with gcc 6.3 Change-Id: Ibdd8242494c6a2bc0c6ead7ac98be55149219d7c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-02soc/amd/stoneyridge/southbridge.c: Remove preprocessor #ifRichard Spiegel
Replace #if and #endif with runtime <if (condition) {> and <}> Code Files: southbridge.c BUG=b:62200891 Change-Id: I69877bf301fa89781381e3eb8e6b4acd7e16b4b4 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/21770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-30amd/stoneyridge: Use generic SMM command port valuesMarshall Dawson
Remove the old Hudson-specific SMM command port definitions and use the ones in cpu/x86/smm.h. Change-Id: I3de9a178e5f189ac1dbc921e41b69d47e3796a4f Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-30amd/stoneyridge: Remove HAVE_SMI_HANDLER from makefileMarshall Dawson
Stoney Ridge always now selects HAVE_SMI_HANDLER so it is pointless to use the variable in Makefile.inc. Make all files built into smm unconditional. Change-Id: I4ea89d7bce83a99328c58897a4098debacd86d66 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-30soc/amd/common: Add included directoryMarshall Dawson
If the symbol SOC_AMD_COMMON is selected, include the soc/amd/common directory. Until now this has been working due to the directory being included as part of AGESA_INC in vendorcode. That one is still necessary in order to build the AGESA code so it is left in place for now. Change-Id: Ia8191897d2030c475c9268ae86faaf01952c6ace Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-30soc/intel/braswell/acpi: Clean OpRegion upPatrick Rudolph
Reorder code and put platform specific bits into update_igd_opregion. Get rid of get_fsp_vbt and init_igd_opregion. Write GMA opregion in case a VBT was provided, even when no FSP_GOP is to be run. Use SOC_INTEL_COMMON_GFX_OPREGION to reduce code duplication. Change-Id: Ibabeb05a9d3d776b73f6885dcca846d5001116e7 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-29AGESA binaryPI: Drop amdlib.h in BiosCallouts.cKyösti Mälkki
Some fam14 boards will need more work on this area, those are to be addressed with followup patches. Change-Id: I14208cf8519a4cf71e4944d08a2dae36b7f1f878 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-09-29AGESA binaryPI: Drop amdlib.h in dimmSpd.hKyösti Mälkki
Change-Id: Ic1713d1530071e29bd04b525f68d4a44d20ea2e2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-09-29AGESA binaryPI: Fix indirect AGESA.h includeKyösti Mälkki
Change-Id: I5e2affe337f7e61ca79530b3a77af963e8692ff1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-09-28google/zoombini: Add new boardNick Vaccaro
Add zoombini board files using cannonlake and FSP 2.0. Copied most initial files from poppy and cannonlake_rvp. BUG=b:64395641 BRANCH=None TEST=Compiles successfully using "./util/abuild/abuild -p none -t google/zoombini -x -a" Change-Id: I13ebaae403d08f1b2e6881eeba4dc1787c792b4e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/21273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-28Kconfig: Move libhwbase related options into lib/KconfigNico Huber
More will follow so better move them where they are used. Also remove defaults and add dependencies to not clutter .config files up that don't have any of these options selected. Change-Id: I3a255c821cc26aeb66e4fd6adf7142d7e856f5ac Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-09-28siemens/nc_fpga: Move some parameters to another functionMario Scheithauer
For general use of this driver it is necessary to move some parameters from init_fan_ctrl() to init_temp_mon(). This shift does not lead to any functional change. Change-Id: I6b8f770c768f3dacf96087eb0194cc99f0d11e17 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/21694 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-28amd/stoneyridge: Drop FieldAcccessorsKyösti Mälkki
It was either SAGE or AMD AES who implemented these for binaryPI, and it is not part of the documented AGESA API. My conclusions of these are: AmdGetValue() returns values from build-time configuration, these may not reflect the actual run-time configuration as there are OEM customization hooks to implement overrides. AmdSetValue() in __PRE_RAM__ will fail, as configuration data is const. Also AmdSetValue() in ramstage may fail, if said configuration data has already been evaluated. Semamtics of these calls are unusable unless one also has access to PI source to make exact decision on when they can be called. Remove these now that stoneyridge does not actually require them. Change-Id: I3379a75ce3b9448c17ef00eb16d3193c296626cd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-28drivers/usb/Kconfig: remove USBDEBUG_DONGLE_BEAGLEBONE_BLACKFelix Held
Remove the USBDEBUG_DONGLE_BEAGLEBONE_BLACK option that does the same as USBDEBUG_DONGLE_STD and update the description of USBDEBUG_DONGLE_STD that it also should be selected for the BeagleBone Black. Change-Id: I3093a6d2c39e7b5e81785028e436109090d9e6dd Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/21486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-09-27commonlib: Consistently spell *romstage* without spacePaul Menzel
Make the spelling of *romstage* consistent without a space. Choose this version, as *ramstage* is also spelled without a space, since commit a7d924412a (timestamps: You can never have enough of them!). Fixes: 0db924d74c (cbmem: print timestamp names) Change-Id: I1b1c10393f0afb9a20ac916ff9dc140a51c716cd Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/21706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-09-27soc/amd/stoneyridge: Enable SSEMartin Roth
BUG=b:66997392 TEST=Flash to Kahlee, system no longer resets when the compiler uses SSE instructions. Change-Id: I7c1aed9ecfa6f3496760dcda422ddf184e2a043c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-27soc/intel/skylake: Remove CCA object for IMGU and CIO2 devicesV Sowmya
IMGU and CIO2 devices do support the hardware managed cache coherency and hence removing the CCA object which was reporting that cache coherency is not supported. BUG=none BRANCH=none TEST=Build and boot soraka. Dump ACPI tables and verify that CCA object is not present. Change-Id: I14b0a92eafe193e9004d2dad0957a3fe8d05d313 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/21678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-27mb/google/poppy: Modify HID and add device tree support for VCM deviceV Sowmya
Modify the HID to align with ACPI spec. Add the DSD object for the device tree support in kernel which will probe the DW9714 device based on the HID. BUG=b:65423422 CQ-DEPEND=CL:654383 BRANCH=none TEST=Build and boot soraka. Verified that the VCM device probe is successful. Change-Id: Ic4a59dd2027267fbd3837fcd7dbc00551a69f7d6 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/21508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Tomasz Figa <tfiga@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-27nb/intel/sandybridge/raminit: Improve readabilityPatrick Rudolph
Add debug messages for SPD probing. Change-Id: I722102b7981781b88cdc4877f698294eb719ff32 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-09-27arch/riscv: hls_init: Initialize time{,cmp} with dummy pointersJonathan Neuschäfer
In current versions of spike, the config string is not available anymore, because RISC-V is moving toward OpenFirmware-derived device trees (either in FDT or text format). Using query_config_string leads to a crash in these versions of spike. With this commit and If0bea4bf52d ("riscv: Update register address"), coreboot reaches the romstage again, on spike. Change-Id: Ib1e6565145f0b2252deb1f4658221a4f816e2af4 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-09-27arch/riscv: Document mprv_{read,write}_* functionsJonathan Neuschäfer
Change-Id: Iaf0cb241f0eb4de241f0983c0b32dbcc28f96480 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-09-27mb/emu/*-riscv: Remove outdated memory mapJonathan Neuschäfer
Change-Id: I8919719865bc7ae8d13f025999caf8b5836b88ab Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-09-27arch/riscv: trap handler: Print load/store access width in bitsJonathan Neuschäfer
This is easier to read than the raw shift amount that's extracted from load/store instructions. Change-Id: Ia16ab9fbaf55345b654ea65e65267ed900eb29e1 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-09-27smbus: Fix a typo ("Set the device I'm talking too")Jonathan Neuschäfer
Change-Id: Ia14bbdfe973cec4b366879cd2ed5602b43754260 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 09:31:14 +0000