summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Expand)Author
2013-11-30ibexpeak: set HAVE_USBDEBUG_OPTIONSVladimir Serbinenko
2013-11-26lynxpoint: Add an inverted input GPIO typeDuncan Laurie
2013-11-26google/parrot/smihandler.c: Use `battery_critical_logged` only with `ELOG_GSMI`Paul Menzel
2013-11-26slippy/falco: Re-enable EC software syncDuncan Laurie
2013-11-26Clean up POST codes for Boot State machineDuncan Laurie
2013-11-26Log device path into CMOS during probe stagesDuncan Laurie
2013-11-26Extend CMOS POST code logging to store extra dataDuncan Laurie
2013-11-26cmos post: Guard with spinlockDuncan Laurie
2013-11-26Extend the ELOG errors for EC fan.Marc Jones
2013-11-26qemu: minor bochs cleanupsGerd Hoffmann
2013-11-26AMD Northbridge LX: simplify get_top_of_ram()Christian Gmeiner
2013-11-26Add function to encode device path into integerDuncan Laurie
2013-11-26falco: update verbs for ALC283Duncan Laurie
2013-11-25pc80/mc146818rtc: Return an error code rather than an integerAlexandru Gagniuc
2013-11-25include/types.h: Add generic enum for error codesAlexandru Gagniuc
2013-11-25slippy: update verbs for ALC283Dylan Reid
2013-11-25lynxpoint: Enable USB clock gating, late setup, and sleep prepDuncan Laurie
2013-11-25haswell: check for clean resetAaron Durbin
2013-11-25peppy: Add Elipda DIMM SPDShawn Nematbakhsh
2013-11-25peppy: Initial mainboard commitShawn Nematbakhsh
2013-11-25falco: Update DIMM SPD tableDuncan Laurie
2013-11-25falco: Add panel power sequence timingsDuncan Laurie
2013-11-25haswell: Add magic to turn on grahpics in normal modeDuncan Laurie
2013-11-25falco: Add on-board devices and configure GPIO irq/wakeDuncan Laurie
2013-11-25slippy: Add on-board devices and configure GPIO irq/wakeDuncan Laurie
2013-11-25lynxpoint: Add ACPI Method to enable GPIO as wake sourceDuncan Laurie
2013-11-25falco: Add Elpida DIMM SPDDuncan Laurie
2013-11-25RTC: Skip rtc_init() in S3 resume pathStefan Reinauer
2013-11-25x86: fix compile error for !CONFIG_MULTIBOOTAaron Durbin
2013-11-25baskingridge: drop incorrect USB handling codeStefan Reinauer
2013-11-25lynxpoint: Enable extra 16 IOAPIC entries for GPIO PIRQDuncan Laurie
2013-11-25wtm2: add ssdt2 tableAaron Durbin
2013-11-25smbios: Add generic type41 write functionDuncan Laurie
2013-11-25elog: Check for successful flash erase in elog_shrinkDuncan Laurie
2013-11-25haswell: update pei_data data structureAaron Durbin
2013-11-25falco: Initial mainboard commitDuncan Laurie
2013-11-25lynxpoint: fix mem corruption during ssdt2 genAaron Durbin
2013-11-25lynxpoint: Fix XHCI controller device in ACPIDuncan Laurie
2013-11-25lynxpoint: Enable SerialIO clock in PCI modeDuncan Laurie
2013-11-25slippy: Enable EC SMIDuncan Laurie
2013-11-25lynxpoint: update azalia device idsAaron Durbin
2013-11-25lynxpoint: Change SerialIO device enable reporting to ACPIDuncan Laurie
2013-11-25slippy: Minor vboot related fixesDuncan Laurie
2013-11-25Fix int15 return value for mainboard oprom handlersDuncan Laurie
2013-11-25wtm2: Set SerialIO I2C ports to 3.3VDuncan Laurie
2013-11-25x86: call cbfstool update-fit when fit selectedAaron Durbin
2013-11-25lynxpoint: Expose ACPI Device for LP GPIO controllerDuncan Laurie
2013-11-25Make ssize_t an actual ssize_tStefan Reinauer
2013-11-25lynxpoint: Move ME lock down to ramstageDuncan Laurie
2013-11-25lynxpoint: Add missing ME MBP entriesDuncan Laurie
2013-11-25lynxpoint: export mem console pointer in ACPIAaron Durbin
2013-11-25elog: Make sure the elog data structures are initialized in elog_clear.Gabe Black
2013-11-25lynxpoint: Updates to power management and clock gatingDuncan Laurie
2013-11-25x86: use proper types for interrupt callbacksAaron Durbin
2013-11-25Unify and clean up remaining INT15 handlersStefan Reinauer
2013-11-25butterfly: Log EC shutdown reason in ELOGDuncan Laurie
2013-11-25Fix VGA option rom INT15 handlerStefan Reinauer
2013-11-25qemu: cirrus native video initVladimir Serbinenko
2013-11-25Support for nehalem northbridgeVladimir Serbinenko
2013-11-25Support for Ibexpeak southbridgeVladimir Serbinenko
2013-11-25bochs: add support for native graphicsRonald G. Minnich
2013-11-25Add declaration of dock registers 1, 2 and 3.Vladimir Serbinenko
2013-11-25google/butterfly: Declare mrc_scrambler_seed_chk in cmos.layoutAlexandru Gagniuc
2013-11-24no-car/cbmemc: Fix compilationVladimir Serbinenko
2013-11-24haswell: Update GT PM register valueDuncan Laurie
2013-11-24haswell: Update ULT microcode to 0x10Duncan Laurie
2013-11-24haswell: Remove limit on package C-stateDuncan Laurie
2013-11-24haswell: Update ChromeOS ACPI GPIO packageDuncan Laurie
2013-11-24haswell: split microcode between ULT and non-ULTAaron Durbin
2013-11-24haswell: enable monotonic timerAaron Durbin
2013-11-24haswell: Update ULT microcode to rev 'a'Duncan Laurie
2013-11-24haswell: Configure PCH power sharing for ULTDuncan Laurie
2013-11-24haswell: calibrate 24MHz clock against BCLKAaron Durbin
2013-11-24haswell: configure c-statesAaron Durbin
2013-11-24lynxpoint: Add a function to set an individual GPIODuncan Laurie
2013-11-24lynxpoint: Rework LP GPIO handlingDuncan Laurie
2013-11-24smi: Update mainboard_smi_gpi() to have 32bit argumentDuncan Laurie
2013-11-24slippy: Add panel power sequence timingsDuncan Laurie
2013-11-24slippy: Clean up for easier portingDuncan Laurie
2013-11-24slippy: Run EC init as part of mainboard init stepDuncan Laurie
2013-11-24slippy: Update interrupt routingDuncan Laurie
2013-11-24slippy: set PWM valuesAaron Durbin
2013-11-24slippy: Put SerialIO devices in PCI modeDuncan Laurie
2013-11-24slippy: Add EC to the device treeDuncan Laurie
2013-11-24slippy: Update SPDDuncan Laurie
2013-11-24slippy: Add SPD data for on-board memoryDuncan Laurie
2013-11-24slippy: Prepare LPC IO decode ranges for ECDuncan Laurie
2013-11-24slippy: Add iSSD power sequencingDuncan Laurie
2013-11-24slippy: Initial mainboard commitDuncan Laurie
2013-11-24amd/olivehill: Fix the double spaces in copyright headerZheng Bao
2013-11-24Honor vboot's request to load the VGA option ROMBill Richardson
2013-11-24Northbridge: i945: Native VGA init: print the GMA and GTT addressesPeter Stuge
2013-11-24Northbridge: i945: Native VGA init: use UMA addressPeter Stuge
2013-11-24Lenovo X60: Native VGA init: Get rid of the memory corruptions.Peter Stuge
2013-11-24lenovo/x60: native vga init: fix code style issues.Denis 'GNUtoo' Carikli
2013-11-24dmp/vortex86ex: Move DMP specific POST code defines into one fileAndrew Wu
2013-11-24lenovo/x60: export reboot_bits nvram configuration.Denis 'GNUtoo' Carikli
2013-11-24haswell: Put each logical processor in its own P-state domainDuncan Laurie
2013-11-24haswell: Update microcode for ULT/40651 to rev 8Duncan Laurie
2013-11-24Fix compile error in chromeos by adding stddef.hDuncan Laurie
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 06:19:48 +0000