summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2018-02-27sb/intel/{bd82x6,ibexpeak}: Move RCBA macros to a common locationArthur Heymans
Many generations of Intel hardware have identical code concerning the RCBA. Change-Id: I33ec6801b115c0d64de1d2a0dc5d439186f3580a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-02-26soc/amd/stoneyridge: Refactor northbridge resource allocatorMarc Jones
The resource allocator was overly complicated due to porting from a multi-node resource allocator. It had some assumptions about the UMA memory and where it would be located. The refactored allocations account for UMA being reserved above 4GiB. TEST=Check CBMEM table has correct RAM regions. Change-Id: I722ded9fb877ec756c3af11fcb5fea587ac0ba8e Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-26soc/amd/common: Save the UMA settings from AGESAMarc Jones
Save the UMA base and size settings returned by AGESA in amdinitpost(); Change-Id: Id96cc65582118ad41d397b1a600cab1615676a55 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23818 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-26mainboard/google/zoombini: enable 4 coresNick Vaccaro
BUG=b:70731385 BRANCH=master TEST='emerge-meowth coreboot chromeos-bootimage', flash image.serial.bin to meowth board, boot into kernel, and verify 4 cores are running. Change-Id: Ia233e41acd19b317f82433a5d41d84ea934a66c4 Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org> Reviewed-on: https://review.coreboot.org/23839 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-26src/arch/x86/smbios.c: Fix type 17 part numberRichard Spiegel
Some DIMMs have invalid strings when it comes to device part number (bytes 0x149-0x15c). From DDR4 SPD specs it should be ASCIIZ with unused space filled with white spaces (ASCII 0x20). Byte 20 should be 0 (ASCIIZ), all others should be ASCII. Create a test that detects invalid strings and replace invalid characters with *. If a replacement was made the output string then must be <Invalid (replaced string)>. BUG=b:73122207 TEST=Build, boot and record serial output for kahlee while injecting different strings to dmi17->PartNumber. Use code to examine SMBIOS, while testing different valid and invalid strings. Remove string injection before committing. Change-Id: Iead2a4cb14ff28d263d7214111b637e62ebd2921 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-26soc/amd/common/block/pi/amd_late_init.c: Fix part numberRichard Spiegel
Kahlee DIMM have invalid string when it comes to part number (bytes 0x149-0x15c). We currently force a NA string, but grunt has the proper strings. Just let the string go through, and a second commit within smbios.c will be responsible for testing the string and taking proper action. BUG=b:73122207 TEST=Build, boot and record serial output for kahlee while injecting different strings to dmi17->PartNumber. Remove string injection before committing. Change-Id: I427262873f9ec80f459245e5f509e28a68de3074 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-26ec/google/chromeec: Remove extra newline characters from printkFurquan Shaikh
This change removes extra newline characters from print statements for wake masks. Change-Id: I13cde76bfb0f10b1dda8117c27f2891e909f9669 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/23858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-26mb/siemens/mc_bdx1: Avoid dereferencing a NULL pointerWerner Zeh
Coverity scan has found an error where a NULL pointer is dereferenced. The bug would happen if the devicetree does not contain a valid entry for PCA9538. In this case the code * if (dev->path.i2c.device == PCA9538_SLAVE_ADR) would dereference to a NULL pointer. This patch fixes this issue. Thanks coverity! Found-by: Coverity (CID 1386126: Null pointer dereferences (REVERSE_INULL)) Change-Id: I75e271d86c16fa3938420c43575ebba910f6a2fd Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/23808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-23mb/google/fizz: Enable PCIe port 11, 12Zhongze Hu
Our CFM daughter card would like to use individual PCIe lanes for two different devices on the card. dlaurie@ has reconfigured PCIe port 9-12 from 1x4 to 1x2 + 2x1 on b2b connector on fizz to meet the requirement: https://chrome-internal-review.googlesource.com/571936 We also need to enable the ports on device tree. BUG=b:72523836 TEST=none BRANCH=fizz Change-Id: Icded9850d833752680e0174b6c476e657817b319 Reviewed-on: https://chromium-review.googlesource.com/923867 Commit-Ready: Zhongze Hu <frankhu@google.com> Tested-by: Zhongze Hu <frankhu@google.com> Reviewed-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/924860 Commit-Queue: Shelley Chen <shchen@chromium.org> Tested-by: Shelley Chen <shchen@chromium.org> Signed-off-by: Zhongze Hu <frankhu@chromium.org> Reviewed-on: https://review.coreboot.org/23845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2018-02-23console: Introduce a way for mainboard to override the loglevelJulien Viard de Galbert
This change adds a config option to allow mainboard to override the console loglevel. When the option is set, the platform has to define the function get_console_loglevel returning a valid loglevel value. This allows a mainboard to sample a GPIO to switch the loglevel value between different environments (qualification vs production) without re-flashing. Change-Id: Id6cc72b8fe5c4c50a6f83ce80e6440b078eec6e2 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/23712 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-02-22mb/google/kahlee/mainboard.c: Fix mainboard_picr_dataRichard Spiegel
While programming interrupts, a message "perhaps this device was defined wrong?" shows up twice. This is caused because some devices have interrupt programmed for APIC mode, but not for non-APIC mode. Fix mainboard_picr_data table by identifying devices programmed with value 0x1F while programmed differently on mainboard_intr_data table. Do so only for devices that are used by kahlee or interrupt required by old OS. BUG=b:70788755 TEST=Build and run kahlee, Verify that message disappears from serial output. Change-Id: Ic285036290519ed3ee617dffa616bd26c61575c5 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-22mb/google/kahlee: Use GPIO macros for baseboardJustin TerAvest
This commit uses newly defined macros to make it easier to read which iomux function pads are being configured to use. TEST=Booted grunt, confirmed display backlight came on. BUG=b:72875858 Change-Id: I24e5091fc7ef696f8e9c932ce04664e6cc3ccb90 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-22soc/amd/stoneyridge: Add readable macros for GPIOJustin TerAvest
This commit defines a set of macros for defining GPIO configuration that are easier to read than the raw iomux function values used today. TEST=None BUG=b:72875858 Change-Id: Ie100c8494c565afa28fa44d78ff73155fc8c7ea8 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23828 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-22mb/google/kahlee: Correct bad gpio entryJustin TerAvest
There's no need to set the output enable here; this is already handled by the native function. I'm making this correction in this change to prevent the GPIO pin descriptions from getting confusing. BUG=b:72875858 TEST=Booted, confirmed S5_MUX_CTRL high with and without this change. Change-Id: I9e047be7169586c59892ef2bdab915683feeebda Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-22mainboard/google/meowth: enable PCH iSCLKLijian Zhao
Turn on PCH iSCLK for meowth platform. BUG=None TEST=Boot up into OS and check register programming with iotools, the command is iotools mmio_read32 0xfdad8000, returned value is 0x03. Change-Id: I1e44e3748c9b37c8f60adcc47a866d445d77cfaa Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23368 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-22device/ddr2,ddr3: Rename and move a few thingsArthur Heymans
In order for ddr2.h and ddr3.h to be included in the same file it cannot have conflicting definitions, therefore rename a few things and move some things to a common header. Change-Id: I6056148872076048e055f1d20a60ac31afd7cde6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-02-22mainboard/google: Disable big, pit, and ryu ec buildsMartin Roth
The EC builds for nyan_big, peach_pit, and smaug (ryu) have been removed from the latest EC codebase, so don't try to build them by default anymore. Change-Id: I53901b32753c5b9b050f517bbf3f10b9071913d4 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-22soc/intel/cannonlake: Clear EMMC timeout registerLijian Zhao
Clear EMMC timeout register to avoid EMMC issue according to cannonlake bios writer guide. BUG=b.71586766 TEST=Install OS into EMMC successfully on meowth P1 platform. Change-Id: I39e927a2c312c94561213f9f7c3319dcafa426b9 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-02-22soc/intel/cannonlake: Add emmc/sdc port idLijian Zhao
EMMC and SD Controller port id listed here, the port id definition came from Cannonlake BIOS Writer Guide 570374. BUG=None TEST=None Change-Id: I901e90c47b08bb013fcfee5def610e320a7ac19a Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23789 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-02-22mainboard/google/zoombini: Add config for meowth audioSathyanarayana Nujella
Add NHLT and dt support for meowth with max98373 amp. BUG=b:71724897 TEST='emerge-meowth coreboot' compiles correctly TEST=check SSDT and verify entries for max98373 TEST=check NHLT ACPI tables included blobs for max98373 Change-Id: Ic89bf669c7ab2ef39ce64e4da6a57a7069ee75f9 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-02-22soc/intel/cannonlake: Add more HDA Audio Link settingsLijian Zhao
Since FSP version 7.x.11.43, more HDA Audio link options are exposed, so included that into coreboot. Users can modify that base on platform implementations. BUG=None TEST=Boot up with debug build version FSP and check the debug print result on meowth platform. Change-Id: Ib2a75f554ddf9919a62c78a162ec1b9e602f1f5d Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-02-22soc/intel/cannonlake: Add provision to make CSME function disable in SMM modeSubrata Banik
TEST=lspci from Chrome OS shows CSME device is not visible over PCI tree. Change-Id: I3e0a5b00758a4ce42f2f190748c293c5ce07390c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23824 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-22soc/intel/common/block/smm: Add option to have SOC specific SMI Handler at ↵Subrata Banik
finalize() This patch ensures common code provides an option to register a SOC specific SMI handler before booting to OS (specifically during ramstage). Change-Id: I50fb154cc1ad4b3459bc352d2065f2c582711c20 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tung Lun Loo <tung.lun.loo@intel.com>
2018-02-22soc/intel/common/block/pcr: Add function for executing PCH SBI messageSubrata Banik
This function performs SBI communication Input: * PID: Port ID of the SBI message * Offset: Register offset of the SBI message * Opcode: Opcode * Posted: Posted message * Fast_Byte_Enable: First Byte Enable * BAR: base address * FID: Function ID * Data: Read/Write Data * Response: Response Output: * 0: SBI message is successfully completed * -1: SBI message failure Change-Id: I4e49311564e20cedbfabaaceaf5f72c480e5ea26 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23809 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-22device: Include devicetree in SMM stageSubrata Banik
Allow bootblock to get access to the entire static device tree as other stages can access independently. TEST=SMM code now can access devicetree.cb variables. Change-Id: I59537c16f0a459e48d8b1efb5c1b196302f13381 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-22skylake: remove legacy devices from ACPIPatrick Georgi
Once the FADT reports that they don't exist it makes no sense to have them in ACPI's device tree. Change-Id: Ice82f0de592b6ca955148479fecc8506a7cdcddc Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reported-by: dhaval.v.sharma@intel.com Reviewed-on: https://review.coreboot.org/23835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.corp-partner.google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-22soc/intel/skylake: Do not set ACPI_FADT_LEGACY_DEVICESFurquan Shaikh
SKL/KBL PCH does not support legacy devices. This change removes the setting of ACPI_FADT_LEGACY_DEVICES flag in FADT for SKL/KBL. It helps Linux kernel to disable controllers required to support legacy devices only e.g. i8237 DMA controller. BUG=b:72679357 Change-Id: Ie2a85a719997157f52b0eab7254689f5a56ba05b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/23833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.corp-partner.google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-21mainboard/google/kahlee: Add tis_plat_irq_statusChris Ching
For variants that have a cr50 tpm, this enables faster polling when interacting with the tpm. BUG=b:72838769 BRANCH=none TEST=verified on grunt that irq is used and not timeouts for tpm Change-Id: I5786d334b6c1cc70f4c7107c75b07a7e27ac4428 Signed-off-by: Chris Ching <chingcodes@chromium.org> Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-21soc/amd/stoneyridge: Add functions for GPIO interruptsChris Ching
Add a function to configure interrupt settings for a GPIO. This does not currently configure GEVENT signals. The second function returns the GPIO interrupt status and clears the flag if set. BUG=b:72838769 BRANCH=none TEST=Update and test interrupt settings for GPIO_9 on grunt Change-Id: I1addd3abcb6a57d916b1c93480bacb0450abddf2 Signed-off-by: Chris Ching <chingcodes@chromium.org> Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-21driver/uart: Introduce a way for mainboard to override the baudrateJulien Viard de Galbert
The rationale is to allow the mainboard to override the default baudrate for instance by sampling GPIOs at boot. A new configuration option is available for mainboards to select this behaviour. It will then have to define the function get_uart_baudrate to return the computed baudrate. Change-Id: I970ee788bf90b9e1a8c6ccdc5eee8029d9af0ecc Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/23713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-02-21soc/amd/stoneyridge: Add UMA save functionMarc Jones
Save the UMA values from AGESA to use in resource allocation in ramstage. Change-Id: I2a218160649d934f615b2637ff122c36b4ba617e Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23817 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-20driver/spi: Warn when probed SF size differs from CONFIG_ROM_SIZEArthur Heymans
Some assumptions are made with respect to CONFIG_ROM_SIZE being the actual size of the boot medium, e.g. when automatically creating an fmap with and RW_MRC_CACHE region. With this patch the user is warned when this is detected. Change-Id: Ib5d6cc61ea29214d338d4c52ff799d6620a9cac7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-20nb/x4x/raminit_ddr2: Refactor clock configuration slightlyJonathan Neuschäfer
The result is shorter and (IMHO) more readable code. Change-Id: Ic51c05d7aa791250d775bd7a640213065d4caba0 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-20mb/google/poopy/variants/nami: Add Pmax settingGaggery Tsai
This patch adds the Pmax setting in device tree. The Pmax is from MAX(PL4_sku1, PL4_sku2, ..) + ROPmax. Given ROPmax is 30W and the maximum PL4 is from U42, hence the Pmax = 71W + 30W = 101W. BUG=b:72138778 BRANCH=None TEST=USE=fw_debug emerge-nami chromeos-mrc coreboot chromeos-bootimage & ensure the Pmax value is passed to FSP-S. Change-Id: Ief6a134dc5b6bd2b8e07b4a44450e99ff26402d9 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/23640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-20mb/google/kahlee/OemCustomize.c: Disable bank interleaveRichard Spiegel
AmdInitPost returns AGESA_WARNING. This is because AGESA by default enables bank interleaving, while the HW does not meet the requirements for it. Disable bank interleaving, thus clearing AGESA_WARNING. BUG=b:73118857 TEST= Build and run kahlee. Search for "agesawrapper_amdinitpost() returned AGESA_SUCCESS". Change-Id: Ice9270f9b10051dbb622344919223cf5439f5d7b Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23763 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-20src/soc: Fix various typosJonathan Neuschäfer
These typos were found through manual review and grep. Change-Id: I6693a9e3b51256b91342881a7116587f68ee96e6 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-02-20mb/compulab: Mark Intense-PC as single board computer in board_info.txtJonathan Neuschäfer
Based on the pictures at http://www.fit-pc.com/web/products/intense-pc/, the Intense PC does not look like a laptop. In its documentation it is described as "mini-PC" or "Single Board Computer". This patches moves the Intense-PC into the correct category on the Supported Motherboards page. Due to thermal considerations, I have not removed the "select SYSTEM_TYPE_LAPTOP" in Kconfig. Fixes: de7f8d3a19 ("mainboard/compulab: add support for CompuLab Intense-PC") Change-Id: I4343306a2f82eed8211981cbd3b084f5d112d30b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23707 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-20arch/riscv: Delegate the page fault exceptionsJonathan Neuschäfer
These exceptions were new in the Privileged Architecture spec 1.10. We need to delegate them to S-mode. Change-Id: Iec15afe9656107b9aeea1677c5b8dc7d654fa746 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-02-20arch/riscv: Update encoding.h and adjust related codeJonathan Neuschäfer
Update encoding.h to the version shipped with spike commit 0185d36 ("Merge pull request #165 from riscv/small_progbuf"), and copy the license header from the LICENSE file. Change-Id: I517042e5865986e88a589dc8623745f8d584d6b8 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-02-20arch/riscv: Pass the bootrom-provided FDT to the payloadJonathan Neuschäfer
The RISC-V boot protocol foresees that at every stage boundary (bootrom to boot loader, boot loader -> OS), register a0 contains the Hart ID and a1 contains the physical address of the Flattened Device Tree that the stage shall use. As a first step, pass the bootrom-provided FDT to the payload, unmodified. Change-Id: I468bc64a47153d564087235f1c7e2d10e3d7a658 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-02-20arch/riscv: Don't set up virtual memoryJonathan Neuschäfer
Due to changes in the RISC-V Privileged Architecture specification, Linux can now be started in physical memory and it will setup its own page tables. Thus we can delete most of virtual_memory.c. Change-Id: I4e69d15f8ee540d2f98c342bc4ec0c00fb48def0 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-02-20arch/riscv: Make RVC support configurableJonathan Neuschäfer
In order to support RISC-V processors with and without the RVC extension, configure the architecture variant (-march=...) explicitly. NOTE: Spike does support RVC, but currently doesn't select ARCH_RISCV_COMPRESSED, because coreboot's trap handler doesn't support RVC. Change-Id: Id4f69fa6b33604a5aa60fd6f6da8bd966494112f Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-02-20arch/riscv: Align trap_entry to 4 bytes, as required by specJonathan Neuschäfer
The RISC-V Privileged Architecture spec 1.10 requires that the address part of mtvec is four-byte aligned. The lower two bits encode a "mode" flag and should be zero for now. Add the necessary alignment directive before trap_entry. Change-Id: I83ea23e2c8f984775985ae7d61f80ad75286baaa Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-02-20mb/emu/spike-riscv: Move usage instructions into Kconfig helpJonathan Neuschäfer
... and fix them in the process. The Kconfig help text seems to be a slightly better place for such documentation than a comment in Kconfig. Change-Id: I4114e17ad9c486a9de059040b0e2821540c31aad Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-02-20soc/nvidia/tegra210: add missing bl31 params to ATF configAndre Heider
The ATF tegra210 platform supports more than the currently used 'tzdram_size' parameter, see plat/nvidia/tegra/include/tegra_private.h in the ATF tree. Add the missing parameters and set them accordingly. The passed UART id is based on CONFIG_CONSOLE_SERIAL_TEGRA210_UARTx, so ATF now uses the same port for console output as coreboot. Successfully tested with UARTB. Change-Id: I7a47647216a154894e6c2c1fd3b304e18e85c6a5 Signed-off-by: Andre Heider <a.heider@gmail.com> Reviewed-on: https://review.coreboot.org/23783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-20soc/nvidia/tegra210: set up the clock of the chosen UARTAndre Heider
Don't always set up UARTA, but instead honor CONFIG_CONSOLE_SERIAL_TEGRA210_UARTx and set up the clock of the chosen UART. Now the matching clock for the used UART is set up. (The UART driver uses CONFIG_CONSOLE_SERIAL_TEGRA210_UART_ADDRESS, which in return is already based on CONFIG_CONSOLE_SERIAL_TEGRA210_UARTx.) Change-Id: Ife209d42af83459136a019c21c2a069396ab36db Signed-off-by: Andre Heider <a.heider@gmail.com> Reviewed-on: https://review.coreboot.org/23796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-02-20soc/nvidia/tegra210: add console UART helper functionsAndre Heider
These small helper functions aim at supporting the user setting CONFIG_CONSOLE_SERIAL_TEGRA210_UARTx. Change-Id: I71423a0424927ff383bcbf194c9fbaa452d810a1 Signed-off-by: Andre Heider <a.heider@gmail.com> Reviewed-on: https://review.coreboot.org/23795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-02-20soc/nvidia/tegra210: define missing UART clocks sourcesAndre Heider
These are required to honor CONFIG_CONSOLE_SERIAL_TEGRA210_UARTx later on. Change-Id: I7243812fba6f30f1db4db868b258794e7b248be8 Signed-off-by: Andre Heider <a.heider@gmail.com> Reviewed-on: https://review.coreboot.org/23794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-02-17chromeec: Sync ec_commands.h for CBI tagsDaisuke Nojiri
This patch syncs ec_commands.h with the one in chromeec. BUG=b:70294260 BRANCH=none TEST=Verify SKU_ID and OEM_ID are correctly recognized on Fizz. Change-Id: I451ec9f6f9d7257915b7d4cb1e5adbee82d107de Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-17mb/google/fizz: Wait until display is readyDaisuke Nojiri
Fizz fails to show pictures on a type-c monitor because VBIOS runs before DisplayPort link is ready. With this patch, when firmware needs to display something, Fizz calls google_chromeec_wait_for_display to make sure display is ready. The penalty is up to 2 sec per boot in dev and rec boot. Normal boot won't affected unless there is EC update. BUG=b:72387533 BRANCH=none TEST=Verify screens are displayed on Fizz as follows: 1. Put DUT in normal mode 2. Flash EC image to trigger EC sync (critical update) 3. Trigger manual recovery (insert) 4. Hit ctrl+d to switch to dev mode (to-dev) 5. Confirm to reboot (dev warning) 6. Warm reboot (dev warning) 7. Cold reboot (dev warning) 8. Flash EC image to trigger EC sync (critical update) 9. Trigger manual recovery (insert) Change-Id: I90befe94f93e13904987acda50b2598d034b0031 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-17chromeec: Add google_chromeec_wait_for_displayDaisuke Nojiri
The google_chromeec_wait_for_display API checks whether a display is ready or not. It waits in a loop until EC says it entered DisplayPort alternative mode or times out in 2 seconds. BUG=b:72387533 BRANCH=none TEST=See 23746 "mb/google/fizz: Wait until display is ready" Change-Id: Ieee5db77bd6e147936ea8fc735dcbeffec98c0f8 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-02-17chromeec: Add google_chromeec_pd_get_amodeDaisuke Nojiri
The google_chromeec_pd_get_amode API checks whether TCPM is in a specified alternate mode or not. BUG=b:72387533 BRANCH=none TEST=See 23746 "mb/google/fizz: Wait until display is ready" Change-Id: Ib9b4ad06b61326fa167c77758603e038d817f928 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-17soc/amd/stoneyridge: Normalize GPIO initJustin TerAvest
This makes the flow for GPIO initialization more closely follow that what is performed for other boards so that it's easier to read the flow (and stops relying on BS_WRITE_TABLES). BUG=b:72875858 TEST=Built and booted grunt, built gardenia. Change-Id: Ic97db96581a69798b193a6bdeb93644f6a74fc9d Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23679 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-16mb/google/{soraka,poppy,nautilus}: Set psys_pmax to 45WNaresh G Solanki
Soraka, Poppy & Nautilus are designed to operate at max power of 45 Watt. Hence set psys_max to 45W. BUG=b:66066340 BRANCH=None TEST=Build and boot soraka. Change-Id: If6f624733830b462329b5f539c20e2aea664143e Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/23757 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
2018-02-16amd/stoneyridge: Move model_15_init.c to cpu.cMarshall Dawson
Move the remaining model_15_init.c functionality to cpu.c, making it similar to other soc implementations. Change-Id: Ic8c62b09209fcdaa50ff8ffc7773ef155f979a1b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23724 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-02-16amd/stoneyridge: Use generic fixed MTRR setupMarshall Dawson
Add the X86_AMD_FIXED_MTRRS select back to Kconfig. This got lost when stoneyridge was converted from a cpu/northbridge/southbridge implementation to soc/. Remove the setup from model_15_init.c because this is duplicated functionality. BUG=b:68019051 TEST=Boot Kahlee, check steps with HDT Change-Id: Id5526dcff12555efccab811fa3442ba1bff051bb Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-16x86/mtrr: Enable Rd/WrDram mod in AMD fixed MTRRsMarshall Dawson
AMD's fixed MTRRs have RdDram and WrDram bits that route memory accesses to DRAM vs. MMIO. These are typically hidden for normal operation by clearing SYS_CFG[19] (MtrrFixDramModEn). According to BKDGs and AMD64 Programmer's Manual vol 2, this bit is clear at reset, should be set for configuration during POST, then cleared for normal operation. Attempting to modify the RdDram and WrDram settings without unhiding them causes a General Protection Fault. Add functions to enable and disable MtrrFixDramModEn. Unhide/hide as necessary when copying or writing the fixed MTRRs. Finally, modify sipi_vector.S to enable the bits prior to writing the fixed MTRRs and disable when complete. This functionality is compiled out on non-AMD platforms. BUG=b:68019051 TEST=Boot Kahlee, check steps with HDT Change-Id: Ie195131ff752400eb886dfccc39b314b4fa6b3f3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-16mb/scaleway/tagada: Remove unused board_idJulien Viard de Galbert
Change-Id: I6175ce3d3ef739c4f503db826036ffe8feff9ddc Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/23741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-16mb/scaleway/tagada: Update GPIO configurationJulien Viard de Galbert
Change-Id: Ia0293a0ec85c752686750dadb9730a159fd0c073 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/23740 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-16mb/scaleway/tagada: Remove eMMC configurationJulien Viard de Galbert
The board does no support eMMC so no need to configure it. Change-Id: If29009a09f39484b1da16fb650b4f9cbee2a6d19 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/23739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-16mb/scaleway/tagada: Remove memory down optionJulien Viard de Galbert
The board does not have memory down, only 2 DDR4 Slots. Change-Id: I70eda83fbce7a707da170c7e555ed1a6dc6b1f4a Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/23738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-16mb/scaleway/tagada: Update HSIO configurationJulien Viard de Galbert
Change-Id: I213ea13078fdc28489eb4572a084146df333a31d Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/23737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-16mb/scaleway/tagada: Update device treeJulien Viard de Galbert
Change-Id: I1c42519dbe848b0bbcafa7f923d862ba7c9d8ed5 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/23736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-16mb/scaleway/tagada: Copy intel/harcuvar and renameJulien Viard de Galbert
Change-Id: I6fc1f8393ce3f5ba6f52edad7cf8efa5524d2704 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/23735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-16soc/amd/stoneyridge/spi: Use correct conversion specifierPaul Menzel
Use the correct conversion specifier `z` for `size_t` to fix the error below. ``` error: format '%lx' expects argument of type 'long unsigned int', but \ argument 4 has type 'size_t {aka unsigned int}' [-Werror=format=] ``` Found-by: gcc (Debian 7.3.0-3) 7.3.0 Change-Id: I05d3b6c9eec0ebf77cdb9e9928037e837f87ea03 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/23770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-16soc/amd/common/block/pi/amd_init_late.c: Transfer memory info to cbmemRichard Spiegel
SMBIOS structure type 17 is not being generated because memory info is not being stored to cbmem. This has to happen after AGESA AmdInitLate has run, but before SMBIOS is generated. There's a need to convert format between AGESA generated info, and what is required in cbmem. Create a procedure that transfers information between AGESA and cbmem, and call it from agesawrapper_post_device() after AmdLateInit is called. BUG=b:65403853 TEST=build and run kahlee, verify if SMBIOS structure type 17 is being generated, and if associated strings are what should be expected. Change-Id: I151a8f1348c9bafceb38bab1f79d3002c5f6b31b Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-16mb/google/zoombini/variants/meowth: enable FPMCU interruptVincent Palatin
Enable the micro-controller interrupt line as a real IRQ. BUG=b:71986991 BRANCH=none TEST=on Meowth, run 'ectool --name=cros_fp fpmode capture' and see the number of interrupts incrementing and the MKBP event happening. Change-Id: Ic0cf03d2a3508148b6482a5a595eaa213eff52c7 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: https://review.coreboot.org/23769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-16soc/intel/cannonlake: Update GPIO ASLLijian Zhao
GPIO pin definition had been updated to match Cannonlake PCH-LP EDS, hence the ACPI dsdt table will include those changes as well. BUG=None TEST=Build coreboot image, flah coreboot image into DUT, and target system can boot up into OS. Change-Id: I958e0cb71b4e656bec9bfe2d12076b577b57629b Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-16soc/intel/cannonlake: Use common PCR ASLLijian Zhao
Switch to use common version of PCR asl. BUG=NONE TEST=Boot up into chrome OS properly on cannonlake rvp platform. Change-Id: I4975704434d4743bcc0fb6062115da349166c3a6 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-02-16soc/intel/common/block/gpio: Change group offset calculationBora Guvendik
Add group information for each gpio community and use it to calculate offset of a pad within its group. Original implementation assumed that the number of gpios in each group is same but that lead to a bug for cnl since numbers differ for each group. BUG=b:69616750 TEST=Need to test again on SKL,CNL,APL,GLK Change-Id: I02ab1d878bc83d32222be074bd2db5e23adaf580 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/22571 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-16soc/intel/skylake: Switch to common PCR ASLLijian Zhao
Using common PCR asl for skylake/kabylake platform. BUG=None TEST=None Change-Id: I99ec7c878adaea439108553c0fac9d5abe1bc248 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-02-16soc/intel/common: Add generic PCR aslLijian Zhao
Access to PCH Private Configuration Space Register can be addressed via SBERG_BAR, the method is generic across several generations of Intel SOC. BUG=None TEST=None Change-Id: Iaf8c386824ee08cb93cb419ce3cdb2d3fe22a026 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-02-16soc/intel/cannonlake: Add missing GPIO pin definitionsLijian Zhao
Fill the missing GPIO pin definitions, includeing community 3. Change-Id: I73b7803c73446660f5c25b1263e47bb50a955c56 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22482 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-16google/gru: Fix GPIO_WP pull and polarity for ScarletJulius Werner
Turns out the write-protect GPIO polarity for Scarlet is different than for Kevin/Gru, and nobody ever told us. Also, it must not be configured with an internal pull-up or we'll not read the correct value. This patch fixes both issues. BRANCH=scarlet BUG=b:73356326 TEST=Booted Scarlet, confirmed that crossystem wpsw_boot returns the right value in all cases. Change-Id: Idd348ecdf9da8fff7201b83e869ba097b8570f32 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/23767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-15mb/google/poppy/variant/nautilus: Enable and configure DPTFSeunghwan Kim
This change enables DPTF and configures the policy. DPTF parameters were provided by internal power team. BUG=b:67877437 BRANCH=master TEST=emerge-nautilus coreboot Change-Id: I31b31d5282ab38278bc68045ce75fdc6192f1144 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/23731 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-15mb/intel/glkrvp: Add FPF_STATUS section in fmd fileHannah Williams
Read cse file was not getting cached and taking about 500ms on every boot. Change-Id: I8c92eefc64fe146c628d9c104d7dfb016204004c Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/23743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-15cpu/x86/16bit/entry16.inc: Fix typo in commentPaul Menzel
Add the missing *r* of the possessive pronoun *your*. Change-Id: I2b520f398a904eb8e4412835d90bde1ee0b504b7 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/23758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-02-15drivers/generic/adau7002/adau7002.c: Fix null pointer dereferenceRichard Spiegel
Procedures acpi_device_scope() and acpi_device_name() can under certain conditions return NULL. Check the return before using them. This fixes CID 1385944 BUG=b:73331544 TEST=Build kahlee. Change-Id: Ifcdf905100d22a1d828394f8685641eb432bb836 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23760 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-15soc/amd/common/block/s3/s3_resume.c: Check mrc_cache_get_current() returnRichard Spiegel
Procedure mrc_cache_get_current() returns -1 for error, 0 for pass. Do check the return in procedure get_s3nv_info. This fixes CID 1385943 BUG=b:73333332 TEST=Build kahlee Change-Id: I0f6a58380a38d13120e997dcd966423d3c2af091 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23761 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-15mb/google/octopus: Add new boardHannah Williams
Add octopus board using GLK soc. Copied base code from mainboard/intel/glkrvp. TODO: Fix as per octopus schematic. Change-Id: Ic8c25b3fafbfef31b8b3b802acb3bc53ee7146b6 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/23685 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-15siemens/mc_bdx1: Show mainboard hardware version on consoleWerner Zeh
Show mainboard version in the console log so that one can easily see it. Change-Id: I33bae8b340fce13c0cbe525521828929038b069a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/23750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-15siemens/mc_bdx1: Enable PCA9538 I/O expanderWerner Zeh
The I/O expander on the mc_bdx1 is used to get the hardware version of the mainboard. This patch enables the chip driver for the I/O expander. Change-Id: I98c667fe4dccf0698ab4cb5ede6082f020c70ec6 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/23749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-15drivers/i2c: Add chip driver for I/O expander PCA9538Werner Zeh
The chip PCA9538 is a 8 bit I/O expander connected to the systems I2C bus. Add a chip driver to support this chip. Beside the pure chip driver two interface functions are provided to read the state of the pins and write output values to the pins. As the slave address of this chip is hardware configurable the function pca9538_get_dev() is used to get the right slave address. This function needs to be implemented in mainboard code if one needs to use the interface functions to read and write I/O state. Change-Id: Ic856123b4f4c8b721928ee3a2a4bb37833ea4b20 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/23748 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-14mb/*/spd: Use normal binary numbers (0b0010) instead of special format (2b0010)Jonathan Neuschäfer
This format (one hex digit, followed by 'b', followed by binary digits) is arguably useful, but also confusing. Use the more common format instead. Change-Id: Ide7b0a999483a2dd863a70f8aa42cd0865e2babf Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-14drivers/i2c/designware: Remove spurious word ("familuar")Jonathan Neuschäfer
Fixes: b8dc63bdfe ("ic2/designware: Move Intel i2c logic to shared driver") Change-Id: Ic521a2d60b403b322ae583bb2c26da6019bf0ab0 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23714 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-14intel/fsp: Update cannonlake fsp headerLijian Zhao
Update Cannonlake FSP header to revision 7.x.25.31. Following changes had been made: 1. Add PeciSxRest option. 2. Add Thermal Velocity Boost option. 3. Add VR power deliver design option. 4. Match MrcChannelSts. TEST=NONE Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I32e976eacf39d2cd75f8288c86d1de1a54c194c6 Reviewed-on: https://review.coreboot.org/23677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-14drivers/adau7002: Fix include fileDaniel Kurtz
Add missing license and include guard and remove unneeded include. BUG=b:72121803 TEST=compiles Change-Id: Ic359ed262086596a98131669f8eecd531857187a Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23721 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-14soc/amd/stoneyridge: Set up LAPICMarc Jones
LAPIC setup is required to set virtualwire mode for legacy interrupts. This was omitted when stoneyridge was changed to use the common mp_init. BUG=b:72351388 TEST=Verify keyboard now works in SeaBIOS Change-Id: I648d8b5b5a3744a5781446c7cb72934a071f9a72 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23718 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-13mb/google/poppy: Fix the SPD for samsung_dimm_K4A8G165WBFurquan Shaikh
Original SPD provided by the vendor had bytes after 254 shifted by 16 bytes. This change fixes the SPD data based on the latest details received from the vendor. BUG=b:72749394 TEST=Verified that the device with this memory part boots to OS fine. Also, mosys is able to dump the right memory information. Change-Id: I6938dea761c5785048aad69eeeaf50e2d0fa8ca1 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/23729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-13drivers/uart/pl011: Improve PL011 driverDavid Hendricks
This adds a struct for registers along with some bits from ATF to the generic PL011 driver. It also adds a naive implementation of uart_tx_flush() which was previously stubbed out. Change-Id: Iee3fc6308cb92ad784e5ff3ac3a6e995d535be65 Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/23031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-02-12arm64: Add read64() and write64()David Hendricks
Change-Id: I89cf4b996405af616f54cf2d9fabd4e258352b03 Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/23036 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-12armv8: Allow for ARMv8 extensions to be chosenDavid Hendricks
There are now a few architectural extensions available for ARMv8, some of which introduce instructions or other features that may be useful. This allows the user to select an extension implemented on their SoC which will set the -march option passed into the compiler. Change-Id: Ifca50dad98aab130ac04df455bac2cfb65abf82e Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/23641 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-02-12mainboard/google/zoombini/variants/meowth: enable touchscreenNick Vaccaro
BUG=b:69011806, b:72179988 BRANCH=master TEST=Verify touchscreen on meowth works with this change. Change-Id: Iad3f0b77a02552266435e523fdbb74b14ada101a Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/23551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-02-12google/kahlee: Select HAVE_ACPI_RESUMEMarshall Dawson
TEST=Run powerd_dbus_suspend and resume with button press BUG=b:69614064 Change-Id: I0a5a610590b599b96dd0def211c4aa31c7a538ea Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22732 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-12amd/stoneyridge: Add S3 support to POSTMarshall Dawson
Add/update the romstage and ramstage paths to check for S3 resume and call the appropriate AGESA functions. TEST=Suspend/Resume Kahlee with full S3 patch stack BUG=b:69614064 Change-Id: Ie6ae66f88b888fff3a800b4ed55dd1f6fed712b2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-12soc/amd/common: Call AmdS3FinalRestoreMarshall Dawson
AMD support in coreboot has typically not used the AmdS3FinalRestore() Entry Point. Add a call to it immediately prior to resuming to the OS. BUG=b:69614064 TEST=Check console log for execution Change-Id: Iadc4438d8cda9766002f6edade3c7b00b23b98b4 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-12soc/amd/common: Add S3 resume functions to wrapperMarshall Dawson
Add new functions that can execute InitRtb, InitResume, LateResume, and FinalResume. Note that the name AmdInitRtb supersedes the deprecated AmdS3Save. TEST=Suspend/Resume Kahlee with complete S3 patch stack BUG=b:69614064 Change-Id: I5c6a9c1a679a1c4d3f7d1d3b41a32efd0a2c2c01 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-12vc/amd/00670F00: Introduce S3FinalRestore helperMarshall Dawson
The Arch2008 spec describes an AmdS3FinalRestore Entry Point that coreboot has been missing. Add the helper function that can call into the blob to execute this. BUG=b:69614064 Change-Id: Ic72feb0406cd1d0d5c23e391c2464e12c9e10007 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-12soc/amd/common: Replace missing AmdReleaseStruct() callsMarshall Dawson
The AGESA spec states that "Failure to release a structure can cause undesired outcomes." Uncomment the one in AmdInitLate(). The function only dealocates the structure used for the AGESA entry point, and not the internal data used by coreboot. Release the structure in AmdInitEnv(). This appears to have been an omission years ago when duplicating agesawrapper.c for every mainboard was still common. BUG=b:70671742 TEST=Build and boot Kahlee, inspect console log Change-Id: Ib1ff94ec2acdc845c5e4b4ed7088061cfc0c55f3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22888 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-12soc/amd/common: Add S3 supporting functionsMarshall Dawson
Add functions that the wrapper will call to get and save the S3 data. The wrapper requires two types of data saved: * Non-volatile: Information that is the minimum required for bringing the DRAM controller back online. This change uses the common mrc_cache driver to manage the storage * Volatile: May be stored in DRAM; information required to complete the system restoration process. TEST=Suspend/Resume Kahlee with complete S3 patch stack BUG=b:69614064 Change-Id: Ie60162ea10f053393bc84e927dbd80c9279e6b63 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>