summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Expand)Author
2011-01-30Replace special rules for auxiliary files by cbfs-files-y entriesPatrick Georgi
2011-01-30Inverse two arguments of cbfs-files-y and adapts its users (one of which alre...Patrick Georgi
2011-01-29Pass all required toolchain parts to SeaBIOS correctlyStefan Reinauer
2011-01-28Attached patch fixes the LPC decode ranges of SB700. We enable early only Ser...Rudolf Marek
2011-01-28This patch gets usbdebug console working in romstage.Stefan Reinauer
2011-01-28rename CONFIG_SERIAL_POST to CONFIG_CONSOLE_POSTStefan Reinauer
2011-01-28Fix Bimini buildStefan Reinauer
2011-01-28rk886ex lacked EC_ACPIStefan Reinauer
2011-01-27Only add EC code if EC is selected in KconfigStefan Reinauer
2011-01-27Add new ec subdir for Embedded Controllers and common ACPI EC supportSven Schnelle
2011-01-27SMM code on i945 platforms needs udelay()Peter Stuge
2011-01-27Add a new CMOS variable which triggers activation of thePatrick Georgi
2011-01-27Trivial. Re-indent the code.Zheng Bao
2011-01-27Set the phy via weak function.Zheng Bao
2011-01-27oops. this is weird. CAR addresses should be specified in the socket and not inStefan Reinauer
2011-01-25Set the SB800 SATA PHY correctly.Zheng Bao
2011-01-24This patch fixes an 'write_tables: coreboot table didn't fit (f0221)' issue.Josef Kellermann
2011-01-24Change fadt revision back to 3.Zheng Bao
2011-01-21... And fix the other compile time issues in cmos_layout.bin supportPatrick Georgi
2011-01-21Make YABEL warnings-are-errors safePatrick Georgi
2011-01-21Typo. s,CMOS_COMPONENT,CBFS_COMPONENT,.Patrick Georgi
2011-01-21Now bimini can boot linux to login.Zheng Bao
2011-01-21push ts5300 rom size to 1MB. In fact the flash part on thatStefan Reinauer
2011-01-20Remove the code for debugging.Zheng Bao
2011-01-20S3 feanture of SB800. Compiliant with SB700.Zheng Bao
2011-01-20Move some board specific functions to sb800.h.Zheng Bao
2011-01-20Features of Bimini board:Zheng Bao
2011-01-20This sb800 code is derived from sb700.Zheng Bao
2011-01-20For Cx, each ChipSel need to be sent MR command.Zheng Bao
2011-01-19Add a GX2 Kconfig option to choose the framebuffer size.Nils Jacobs
2011-01-19Revert r5902 to make code more readable again. At least three people like toStefan Reinauer
2011-01-19Now that the VIA code is run above 1Meg (like other boards), it shouldKevin O'Connor
2011-01-19The cn700.c code references mainboard_interrupt_handlers() which isn'tKevin O'Connor
2011-01-18Report if cmos_layout.bin can't be found when it should.Patrick Georgi
2011-01-18Move option table (cmos.layout's binary representation)Patrick Georgi
2011-01-18remove the code which is not ready to release.Zheng Bao
2011-01-18remove the code which is not ready to release.Zheng Bao
2011-01-18remove the code which is not ready to release.Zheng Bao
2011-01-18remove the code which is not ready to release.Zheng Bao
2011-01-17The code is tested on my board with register DIMMs. More tests need to beZheng Bao
2011-01-16Ooops lets see if this extra comment removal fixes this.Rudolf Marek
2011-01-16Trivial, cleanup of GPIO comments.Rudolf Marek
2011-01-14Disable CMOS recovery code for ROMCC boards as the CBFS code used forPatrick Georgi
2011-01-14Improved GPIO setup for roda/rk886ex, and some documentationPatrick Georgi
2011-01-14Allow coreboot to initialize CMOS if checksum is invalid.Patrick Georgi
2011-01-13Default to CRT on Kontron/986lcd-m. "default display" doesn't alwaysPatrick Georgi
2011-01-13Improve compatibility of YABEL with real-world VGABIOSesPatrick Georgi
2011-01-12drop unused filesStefan Reinauer
2011-01-11change a readable way to fix SB800 CIMX "multi-character constant warning".Kerry She
2011-01-06Various Nokia IP530 fixes.Marc Bertens
2011-01-06Fix some settings fo AMD MCT. It is based on BIOS test suite.Zheng Bao
2011-01-05uart_init is only used in romstage.Stefan Reinauer
2011-01-05move single options out of main menu and remove stray "options"Stefan Reinauer
2011-01-04MCP55: Cosmetic fixes, switch to u8 et al.Uwe Hermann
2011-01-04CK804: Cosmetic fixes, switch to u8 et al.Uwe Hermann
2011-01-04Trivial:Kerry She
2011-01-04Trivial: use the IO_APIC_ADDR constant defined in ioapic.h, and spell checkKerry She
2011-01-01src/southbridge/amd/cimx_wrapper: Run dos2unix on the files.Uwe Hermann
2011-01-01AMD SB800: Drop component prefix from filenames.Uwe Hermann
2011-01-01AMD Bimini: Use mptable_init() in mptable.c.Uwe Hermann
2011-01-01AMD Bimini: Small fixes, and updates to recent trunk conventions.Uwe Hermann
2011-01-01AMD Bimini: Drop duplicate ASL files as we did for other boards.Uwe Hermann
2011-01-01Add support for the AMD Bimini eval mainboard.Kerry She
2011-01-01Add AMD SB800 southbridge support via cimx_wrapper.Kerry She
2011-01-01Add AMD SB800 southbridge CIMx code.Kerry She
2010-12-31Add RS785(RS880) support. Just few pci_ids.Zheng Bao
2010-12-30Remove duplicated GX2 processor IIOC mode setting on CS5535 southbridge codeNils Jacobs
2010-12-30Use die() to assure the processor can't wake up from an interrupt.Nils Jacobs
2010-12-30Per default, use SeaBIOS payload instead of no payload.Stefan Reinauer
2010-12-29-Change the remaining GLIU1 port 5 register names from VIP (Video Input Port)Nils Jacobs
2010-12-29fix i810 boards with ram init debugging disabled.Stefan Reinauer
2010-12-29-Clean up some comments.Nils Jacobs
2010-12-27proper printk handling in src/northbridge/intel/i82810/raminit.cStefan Reinauer
2010-12-27__PRE_RAM__ is defined by the makefileStefan Reinauer
2010-12-27dump_spd_registers() is only defined when ram init debugging is on.Stefan Reinauer
2010-12-27Fix most CONFIG_DEBUG_RAM_SETUP issues. Stefan Reinauer
2010-12-27Intel SCH: make state machine binary selection available in Kconfig for now.Stefan Reinauer
2010-12-26All the values should stay untouched or be set automatically by the resourceStefan Reinauer
2010-12-26Random fixes for TI pci1x2x / Nokia IP530 / others.Uwe Hermann
2010-12-26Move Geode GX2 UMA video memory size to KconfigNils Jacobs
2010-12-26Remove dead and unused Geode GX2 codeNils Jacobs
2010-12-26Replace Geode GX2 MSR addresses for GLCP on GLIU1 with namesNils Jacobs
2010-12-26Clean up Geode GX2 comments, whitespace and coding style. Trivial.Nils Jacobs
2010-12-25Nokia IP530: Add missing "select SDRAMPWR_4DIMM".Uwe Hermann
2010-12-23Fix build with CONFIG_DEBUG_RAM_SETUP on Intel 440BX, use printk().Keith Hui
2010-12-19The same mechanisms are used for normal and fallback images. Stefan Reinauer
2010-12-19ASUS M2N-E: Enable PCI-E x16 slot.Uwe Hermann
2010-12-18SMM on AMD K8 Part 2/2Rudolf Marek
2010-12-18SMM for AMD K8 Part 1/2Stefan Reinauer
2010-12-18Fix a few whitespace and coding style issues.Uwe Hermann
2010-12-18A couple of Poulsbo fixes:Patrick Georgi
2010-12-18Support Intel SCH (Poulsbo) and add iwave/iWRainbowG6 boardPatrick Georgi
2010-12-17Remove some more unused/incorrect hda_verb.h files.Uwe Hermann
2010-12-17fix the tree again. Stefan Reinauer
2010-12-17add license headers to some trivial files and pc87427.hStefan Reinauer
2010-12-17drop one more version of doing serial uart output differently.Stefan Reinauer
2010-12-17guard against the case that CONFIG_WAIT_BEFORE_CPUS_INIT is not defined at all.Stefan Reinauer
2010-12-16drop unused code in div64.hStefan Reinauer
2010-12-16print what make is doing (CBFS call)Stefan Reinauer
2010-12-16don't hardcode CONFIG_PC80_SYSTEMStefan Reinauer
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 09:31:24 +0000