summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-08-10soc/intel/apollolake: Rename UART irqsPatrick Rudolph
Use the same names as on other intel socs. Will be used in intel common uart driver. Change-Id: Ia418fefb3f925fe4d000683b5028682cf0b68a9b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-10soc/intel/apollolake: Add irq.hPatrick Rudolph
Move defines from soc_int.asl to soc/irq.h. The common code uart driver expect it to exist. Change-Id: I000a041120daa8cbe1ca4e4aab48a206bb3e9245 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-10soc/intel/cannonlake/acpi/serialio.asl: Don't advertise unavailable devicesPatrick Rudolph
On PCH-H the I2C4 0:19.0 device isn't usable and thus 0:19.1 and 0:19.2 can't be detected using standard PCI probing. Remove I2C4, I2C5 and UART2 from generic ASL code on PCH-H platforms that advertise its PCI conformance by the _ADR attribute. Change-Id: I89f9ab7d4afb2e7d1b1e24d072adf99e0da6fecf Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-10soc/intel/common: Include Alder Lake SATA controller device IDsSubrata Banik
Document Number: 619501, 619362 Change-Id: Id3440b415ca80edebb6880b8b48f6094ebea4ae4 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-09soc/intel/{icl.tgl,jsl}: Remove SMRAM register programmingAamir Bohra
SA SMRAMC register PCI offset 0x88 is deprecated for ICL, JSL and TGL. Removing the register programming for these platforms. The write to this register does not take effect and remains configured to 0, even when programmed. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I3f581b90ea99012980f439a7914e8d901585b004 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-08vendorcode/intel/fsp/fsp2_0/CPX-SP: update to ww32 release and adapt socJonathan Zhang
Intel CPX-SP ww32 release has a number of bug fixes: a. It fixed the issue related to some PCIe ports being hidden. This affected DeltaLake config A, made the onboard PCIe NIC device not working. ww32 release added two UPD parameters: PEXPHIDE, HidePEXPMenu. b. It fixed the regression related to MRC cache. c. It fixed the issue related to VT-d support, and added X2apic UPD paramter. A separate PR will be submitted to enable VT-d in coreboot. d. It fixed the issue related to enabling thermal device with PCI or ACPI mode. [CB:44075] was submitted to enable it in coreboot. e. It fixed the issue of FSP log level change UPD parameter DebugPrintLevel not working. There is a change in IIO UDS Hob. TESTED=booted YV3 config A, and rebooted it. Access the target OS remotely. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Iaffcb9d635f185f9dd6d6fbe4457549984a993a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-08mb/google/zork/trembyle: comment why USB OC pin mapping is differentFelix Held
Change-Id: I68b7529733e604ac45919a54e094be7eeb044458 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-08soc/intel/skylake: Enable CIO depending on devicetree configurationFelix Singer
Currently, CIO gets enabled by the option Cio2Enable, but this duplicates the devicetree on/off options. Therefore, depend on the devicetree for the enablement of the CIO controller. All corresponding mainboards were checked if the devicetree configuration matches the Cio2Enable setting, and missing entries were added. Change-Id: I65e2cceb65add66e3cb3de7071b1a3cc967ab291 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44032 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-08soc/intel/skylake: Enable SA IMGU depending on devicetree configurationFelix Singer
Currently, SA IMGU gets enabled by the option SaImguEnable, but this duplicates the devicetree on/off options. Therefore, depend on the devicetree for the enablement of the SA IMGU controller. All corresponding mainboards were checked if the devicetree configuration matches the SaImguEnable setting, and missing entries were added. Change-Id: I293a20a321c75f82a57cbd5339656d93509b7aa6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-08soc/intel/skylake: Add IMGU definitions to pci_devs.hFelix Singer
Change-Id: Iee7393ae7e2aca94151c242894c64ac902f4d437 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-08soc/intel/skylake: Enable SDXC depending on devicetree configurationFelix Singer
Currently, SDXC gets enabled by the option ScsSdCardEnabled, but this duplicates the devicetree on/off options. Therefore, depend on the devicetree for the enablement of the SDXC controller. All corresponding mainboards were checked if the devicetree configuration matches the ScsSdCardEnabled setting, and missing entries were added. Change-Id: I298b7d0b0fe2a7346dbadcea4be22dc67fce4de8 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-08mb/asrock/h110m: remove unused Device4Enable from devtreeMaxim Polyakov
This option has been removed from the parameters structure for Intel Skylake CPU (commit 9c1c009). Change-Id: I9dc6649ad693d18fdc85046ebbcc730a17fed0bf Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner
2020-08-08soc/mediatek/mt8192: Add initial config for new ARMv8 device MT8192CK Hu
Add MT8192 address map, memlayout and first Kconfig. MT8192 is similar to MT8183. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: I4e34c03a11a77ed98674ffd8eeddb20ef5fea89d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43957 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07mb/google/zork: Revert Don't expose reset GPIO for touchscreen to OSMartin Roth
This reverts the code from commit 728c0787f2 that removes the reset GPIO from the touchscreen ACPI interface. That patch exposes a bug which leads to an invalid opcode trap in the touchscreen code. Reverting this gets the system working again, but is not a long-term solution. BUG=b:162596241 TEST=System boots to login screen. Change-Id: I57a070d94f961cec43834c8bedd5dafc8a54171a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43078 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07soc/intel/skylake: Enable thermal subsystem depending on devicetreeFelix Singer
Currently SA thermal subsystem gets enabled by the option Device4Enable, but this duplicates the devicetree on/off options. Therefore depend on the devicetree for enablement of the SA thermal subsystem controller. All corresponding mainboards were checked if the devicetree configuration matches the Device4Enable setting, and missing entries were added. Change-Id: I7553716d52743c3e8d82891b2de14c52c6d8ef16 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44026 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07soc/intel/skylake: Add SA thermal subsystem definitions to pci_devs.hFelix Singer
Change-Id: Ic83cfbe2a715db317d94c2b9c6cdd8c58a43612f Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-07soc/intel/cnl: Set Heci1Disable depending on devicetree configFelix Singer
Currently HECI1 gets enabled by the option HeciEnabled, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement/disablement of the HECI1 device. All corresponding mainboards were checked if the devicetree matches the HeciEnabled setting, and adjusted where necessary. Change-Id: I03dd3577fbe3f68b0abc2d196d016a4d26d88ce5 Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-07soc/amd/picasso/acpi: remove AOAC device enables from global NVSFelix Held
These values in GNVS are written, but never read/used. aoac.asl contains proper ACPI power management functions for the AOAC devices that directly access the state from the device's registers instead of relying on cached values in GNVS, so the corresponding GNVS entries can be dropped. BUG=b:161165393 TEST=Mandolin still boots and dmesg shows no new ACPI errors. Change-Id: Iee78df215308bd9b656228be787fac121d10ca99 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44245 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07xeon_sp/cpx: Enable HWP Intel Speed ShiftJohnny Lin
Set HWP base feature, enable EPP, lock thermal interrupt and lock MSR Tested=On OCP Delta Lake, rdmsr 0x1aa shows 403040 Change-Id: I6d23de4032562095db1aaf96ddfd2b70a4517faa Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44171 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07soc/intel/broadwell/iobp: Log success in `pch_iobp_write()`Angel Pons
This reduces the differences between Lynxpoint and Broadwell. Change-Id: I759aa98b80c70c5024213bd8795375061bdbbf10 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42622 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07security/intel/txt: Fix variable MTRR handlingAngel Pons
The MSR macros were treated as memory addresses and the loops had off-by-one errors. This resulted in a CPU exception before GETSEC, and another exception after GETSEC (once the first exception was fixed). Tested on Asrock B85M Pro4, ACM complains about the missing TPM and resets the platform. When the `getsec` instruction is commented-out, the board is able to boot normally, without any exceptions nor corruption. Change-Id: Ib5d23cf9885401f3ec69b0f14cea7bad77eee19a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-08-07sb/intel/lynxpoint: Use PCI bitwise opsAngel Pons
Some cases could not be factored out while keeping reproducibility. Also mark some potential bugs with a FIXME comment, since fixing them while also keeping the binary unchanged is pretty much impossible. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 does not change. Change-Id: I27d6aaa59e12a337f80a6d3387cc9c8ae5949384 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42154 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07sb/intel/lynxpoint: Consider root ports being disabled by strapAngel Pons
PCIe RPC (Root Port Configuration) straps will force-disable some root port functions if some root ports have a width greater than x1. In two cases, this affects the last function. The PCIe init code will never finish configuring the root ports if that is the case: it assumes that the last function will eventually run through the code, but it doesn't. If PCIe initialization does not complete, pressing the power button will not power off the board, unless it is held for about five seconds. Also, Windows 10 will show a BSOD about MACHINE CHECK EXCEPTION, and lock up instead of rebooting. Depending on the microcode version, the BSOD may not be visible. This happens even when the root port is not populated. Use the strap fuse configuration value to know which configuration the PCH is strapped to. If needed, update the number of ports accordingly. In addition, print the updated value to ease debugging PCIe init code. Existing code in coreboot disagrees with public documentation about the root port width straps. Assume existing code is correct and document these assumptions in a table, as an explanation for the added code. Tested on Asrock B85M Pro4, PCIe initialization completes successfully. Change-Id: Id6da3a1f45467f00002a5ed41df8650f4a74eeba Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44155 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07mb/elmex/pcm205401: Add comment about the codeAngel Pons
It's not missing, it's just not where one expects it to be. Change-Id: I377b68cbdc9266048074dc326490750777a6fbf5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43291 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07mb/asrock/b85m_pro4: Support LPC TPMAngel Pons
This mainboard has a 18-pin LPC header, where one can plug in a TPM. Untested, as I don't have a TPM. Change-Id: I14a159c373987d8b12fde18f327a9eb387c01de8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-08-07security/intel/txt: Allow using CF9 reset, tooAngel Pons
Soften the hard dependency on SOC_INTEL_COMMON_BLOCK_SA by allowing CF9 resets to be used in place of global resets. If both types of reset are available, prefer a global reset. This preserves current behavior, and allows more platforms to use the TXT support code, such as Haswell. Change-Id: I034fa0b342135e7101c21646be8fd6b5d3252d9e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44181 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-08-07mb/intel/kblrvp: Factor out `IoBufferOwnership`Angel Pons
RVP11 and RVP3 set it to zero, the other two omit the setting. Tested with BUILD_TIMELESS=1, all four variants do not change. Change-Id: I6b393f0f2269f62b415456c17ba5962f46a1c5d1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43909 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07mb/intel/kblrvp: Factor out `HeciEnabled`Angel Pons
RVP8 does not set it, and the other variants set it to zero. So, factor it out. Tested with BUILD_TIMELESS=1, all four variants do not change. Change-Id: I67c958af2dc955d07b895dc93fbe2232dbd48d34 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43908 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07soc/intel/common: Log CSE FW Status Registers before triggering recoverySridhar Siricilla
The patch logs CSE Firmware Status Registers(FWSTS1, FWSTS2 & FWSTS3) before triggering recovery to help debugging. BUG=b:159962240 Test=Verified on hatch Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I90e9f5897408bfc37a69cf0bb23bff18a146b9e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43537 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07mb/google/volteer: support variant defined spd pathsNick Vaccaro
Allow variants to override the SPD_SOURCE_PATH to allow supporting different types of DDR. BUG=b:163065661 TEST="emerge-volteer coreboot" and verify all variants build. Change-Id: Id52e651848548a783d6d9f57e88f6099425b063e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-08-07soc/intel/{cnl,icl,jsl,tgl}: Use Bus Master for setting up PWRMBASESubrata Banik
In 'bootblock/pch.c', clear PCI_COMMAND_MASTER (BIT 2) prior to programming PWRMBASE and enable BIT 2 after programming PWRMBASE along with PCI_COMMAND_MEMORY (BIT 1). Also perform below operations 1. Use pci_and_config16 instead of pci read and write 2. Use setbits32 instead of mmio read and write Change-Id: I7a148c718d7d2b618ad6e33d6cec11bd0bce0937 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-07Revert "mb/google/volteer/var/halvor: Update dq/dqs mappings"Paul Fagerburg
This reverts commit 3d813cbede650a89a519d5896652328e4ecf88c6. Reason for revert: the CL made the build unstable. Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Change-Id: I9d067eb13196ff7d537d557d8ff864b1572a3b04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43076 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07src/soc/intel/icelake: Allow option to use USE_INTEL_FSP_MP_INITSubrata Banik
This patch removes the unnecessary enforcement of MP PPI in ICL in order to have parity with other IA-SoC. Now it allows user to select USE_INTEL_FSP_MP_INIT if required. TEST=Able to build and boot ICL platform with either USE_INTEL_FSP_MP_INIT or USE_INTEL_FSP_TO_CALL_COREBOOT_PUBLISH_MP_PPI selected. Change-Id: I25288a24cdf9dceec45a90e4e7233225a6cab508 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-07mb/google/dedede/var/magolor: Select 16 MB SPI ROMRen Kuo
Decrease the SPI ROM size from 32 MB to 16 MB BUG=b:58540772 BRANCH=None TEST= build firmware and check the magolor bin size Change-Id: Ie7ddf698fde1dbf663859d5654946bc08abe737c Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-08-06gpio: Pull down HiZ pins after reading tristate GPIO strappingJulius Werner
People who know a lot more about electrons and stuff than I do tell me that leaving a HiZ pin floating without a pull resistor may waste power. So if we find a pin to be HiZ when reading tristate strapping GPIOs, we should make sure the internal pull-down is enabled when we're done with it. (For pins that are externally pulled high or low, we should continue to leave the internal pull disabled instead.) Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I1669823c8a7faab536e0441cb4c6cfeb9f696189 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44253 Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Alexandru Stan <amstan@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06cpu/intel/common: Add `intel_ht_supported` functionAngel Pons
Change-Id: I90c0378c4042dec39c8c86c1d2339a5cbcfe78e3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-08-06mb/google/volteer/var/halvor: Update dq/dqs mappingsAmanda Huang
Update dq/dqs mappings based on halvor schematics. BUG=b:162892573 BRANCH=none TEST=FW_NAME=halvor emerge-volteer coreboot chromeos-bootimage Change-Id: I98f79283aa18f6fd41114fb6b60cac1cbed69de7 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43988 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06mb/google/zork: Configure GPIO_89 as PAD_NCFurquan Shaikh
GPIO_89 was marked as EN_DEV_BEEP_L in pre-v3.6 schematics, but it was never really used on any of the zork variants. Starting with v3.6, GPIO_89 is left unused in schematics. This change configures GPIO_89 as PAD_NC in baseboard GPIO table. Since EN_DEV_BEEP_L still needs to be driven high to allow speakers to work, GPIO_89 is configured as PAD_GPO driven high on pre-v3.6 schematics. BUG=b:62108046 Change-Id: I026cd6cb598667ce6e115c3ec9357a6a56051d39 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44190 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06mb/google/zork: Add touchscreen power controlFurquan Shaikh
This change adds support for touchscreen power control using: * GPIO_90 for trembyle based boards * GPIO_32 for dalboz based boards By default, baseboard tables configure these GPIOs as PAD_GPO driven low and override trees expose these pads as enable_gpio to be used by ACPI power resource. In order to support pre-v3.6 boards, override tables configure these pads as PAD_NC and drop the enable_gpio setting from device tree based on board version. BUG=b:161935640, b:162747210 Change-Id: Iba5e36b65b44ea11613b4d5fc8f13ce6433f83ab Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44193 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06mb/google/zork: Switch USI_RESET to active low polarity for v3.6+Furquan Shaikh
v3.6 of reference schematics have switched the polarity of reset signal to touchscreen controller from active high to active low. This change updates the default configuration in baseboard gpio tables to set the reset GPIO to output low and override tables in variants to set the reset GPIO to output high. Additionally, devicetree by default exposes ACTIVE_LOW configuration for reset GPIO. In order to support pre-v3.6 boards, reset GPIO is updated to ACTIVE_HIGH based on board version. BUG=b:161937506 Change-Id: I092f274d8eb1920a1cd6d3eccbe8f26b0b28928a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-06mb/google/zork: Use dev_nested_path for dmic gpio updateJosie Nordrum
Create function update_dmic_gpio to update DMIC GPIO for ACP machine and use find_dev_nested_path function for consistency. BUG=None BRANCH=None TEST=None Change-Id: I96cf207f24c6117d98ff2bf7e6e5cd282489e805 Signed-off-by: Josie Nordrum <josienordrum@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44158 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06mb/google/zork: Make SW changes for HP_INT_ODL in schematic v3.6Josie Nordrum
HP_INT_ODL is no longer connected to CODEC_GPI in schematic version 3.6. Split variant_audio_update into update_dmic_gpio and update_hp_int_odl. Changed GPIO_29 from PAD_NC to PAD_GPI in Trembyle. Changed GPIO_84 from PAD_NC to PAD_GPI for Dalboz. Changed HP_INT_ODL to appropriate pin in both boards devicetree.cb. BUG=b:161938476 BRANCH=None TEST=None Cq-Depend: chromium:2335424 Change-Id: I05ffb063ab99823d07be6eaa911efbde3cc4ff55 Signed-off-by: Josie Nordrum <josienordrum@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44157 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06mb/google/zork: Add kconfigs to check schematic version 3.6Josie Nordrum
Added VARIANT_SUPPORTS_PRE_V3_6_SCHEMATICS and VARIANT_MIN_BOARD_ID_V3_6_SCHEMATICS. Added helper functions to check if variant uses v3.6 and if variant uses CODEC GPI. BUG=b:161938476 BRANCH=None TEST=None Change-Id: If86e1ea3c02db354c7b410f1bbc1daacb483cc51 Signed-off-by: Josie Nordrum <josienordrum@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44156 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06mb/google/volteer: add support for ddr4 memoryNick Vaccaro
Add new ddr_memory_cfg structure to support both DDR4 and LPDDR4x memory types. Change existing variant code to use the new meminit_ddr() call instead of calling meminit_lpddr4x() directly. BUG=b:161772961 TEST='emerge-volteer coreboot chromeos-bootimage' and verify that volteer still boots. NOTE that this only tests the lpddr4 side of the implementation as I do not have a DDR4 board to test this on. Change-Id: Id4bca2bfa97530f0d04a0e8d90f01b8281d2aea6 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-08-06soc/intel/tigerlake: add common routine for DDR initNick Vaccaro
Add a common routine meminit_ddr() that calls the appropriate meminit routine based on whether the memory type requested is LPDDR4x or DDR4. BUG=b:161772961 TEST='emerge-volteer coreboot chromeos-bootimage' and verify that volteer still boots. NOTE that this only tests the lpddr4 side of the implementation. I do not have a DDR4 board to test this on. Change-Id: Ib2039eb89211efc48d10897eb679d05f567ae5a1 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-08-06mainboard/google/puff: Remove second temp sensorAndrew McRae
Newer boards have removed the second temperature sensor and relocated the remaining sensor. BUG=b:162909373 TEST=Confirm on hardware. Change-Id: Ie41a57598b0c87a6632f4c55c0f60a94a89cae43 Signed-off-by: Andrew McRae <amcrae@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-06security/intel/txt: Avoid shifting by a negative valueJohn Zhao
Coverity detects an integer handling issue with BAD_SHIFT. The inline function log2_ceil(u32 x) { return (x == 0) ? -1 : log2(x * 2 - 1); } could return -1, which causes shifting by a negative amount value and has undefined behavior. Add sanity check for the acm_header->size to avoid shifting negative value. Found-by: Coverity CID 1431124 TEST=None Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ic687349b14917e39d2a8186968037ca2521c7cdc Reviewed-on: https://review.coreboot.org/c/coreboot/+/44186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-06arch/x86/pirq_routing.c: Drop unneeded `continue`Angel Pons
Change-Id: I714247da261d4dd1b6a722436d71404f9862e958 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-06nb/intel/sandybridge: Drop inexistent device from DMARAngel Pons
There's no `function 1` on the iGPU device for this northbridge. Change-Id: I597446f703165447c3a0d0c1536583b08bc8450c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-06nb/intel/sandybridge: Deduplicate PCIEXBAR decodingAngel Pons
We can use `decode_pcie_bar` instead, as other northbridges do. Change-Id: I35bede573ef2635c54123f9e553003577ecd0ea7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-06nb/intel/sandybridge: Refactor `get_pcie_bar`Angel Pons
Turn it into `decode_pcie_bar`, taken from gm45. Change-Id: Id1c2cfbcac1a798d046beced790930511dc97972 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44121 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06drivers/intel/fsp2_0: Do AP re-init after FSP-S if USE_INTEL_FSP_MP_INIT enableSubrata Banik
This patch ensures that coreboot is able to take control of APs back by doing a full AP re-initialization after FSP-S is done. TEST=Able to see all cores available after booting to OS using below command when coreboot is built with USE_INTEL_FSP_MP_INIT enable. > cat /proc/cpuinfo Without this CL : shows only 1 core (only BSP) With this CL : shows all possible cores available (BSP + APs) Change-Id: I247d8d1166c77bd01922323b6a0f14ec6640a666 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-06soc/intel/common/block/cpu: Refactor init_cpus functionSubrata Banik
This patch makes init_cpus function external so that it can be used in below scenarios: 1. When coreboot is doing MP initialization as part of BS_DEV_INIT_CHIPS (exclude this call if user has selected USE_INTEL_FSP_MP_INIT) 2. coreboot would like to take APs control back after FSP-S has done with MP initialization based on user select USE_INTEL_FSP_MP_INIT Also make sure post_cpus_init function is getting executed unconditionally to update MTRR snapshot on all cores. Change-Id: Idc03090360f34df074b33ba0fced2d192edf068a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-06soc/mediatek/mt8183: Set MMU default map length to 8GB befor mem initHuayang Duan
BUG=none BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: I072745933fe141cac26afd044836a564e345d036 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43795 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06mb/google/kukui: Add ddr geometry to support 6GB, 8GB DDR bootupHuayang Duan
Set correct DDR geometry for all existing memory modules. BUG=none BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: I9b53ab2bf43e0dfb7448eb37a18faf686267eaed Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-08-06soc/mediatek/mt8183: Add ddr geometry to support 6GB, 8GB DDR bootupHuayang Duan
Currently the DRAM initialization code can only work on 4GB size and want to support larger memory sizes in future, so add geometry information to the DRAM calibration parameters. BUG=none BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: I1fdf50b75c6a552c0a889f21e1a81ab4b9a305fa Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-06soc/mediatek/mt8183: Adjust tRFCab and tRFCpb by the density valueHuayang Duan
Different density should correspond to different tRFCab and tRFCpb timing. BUG=none BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: I2599fcd620cdefe2e12480932ffd75e0416b9545 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-08-06soc/mediatek/mt8183: Add missing register settings for channelsHuayang Duan
Some DRAM control settings need to apply to all channels, so add those missing settings. Also fix a typo (0x1 < 0) to (0x1 << 0). BUG=none BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: I35e25c922ed45216d5f04835abcd10809a8d559a Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-06mb/google/kukui: Add a new config 'Fennel'xiatao5
A new board introduced to Kukui family. BUG=b:162478693 TEST=make # select Fennel BRANCH=kukui Signed-off-by: xiatao5 <xiatao5@huaqin.corp-partner.google.com> Change-Id: I1f742a36793f38c37fbd4e1b4cbddbd542e785ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/44061 Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-by: Zhaoyou Hong <hongzhaoyou@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-05vendorcode/amd/fsp/picasso Fix type 17 smbios misalignmentJason Glenesk
Add __packed to TYPE17_DMI_INFO structure to remove padding. Remove reserved fields that are no longer required. Corresponding change will also be made within fsp to pack the structure. BUG=b:154046847 TEST=Boot a trembyle with and without the reserved fields and confirm type 17 table is unchanged. Cq-Depend: chrome-internal:3194239 Change-Id: I9ba7e2a4fb82c7b0b77ee7c6c075e6211d4f6adf Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2020-08-05mb/intel/jasperlake_rvp: Replace static camera ACPI by driverSugnan Prabhu S
This change updates devicetree to enable SSDT generation for world facing and user facing cameras of jasperlake_rvp. Also removes DSDT changes related to the world facing camera. Change-Id: Ib439572bc1d15ef02c86c7bfa88af6b16eb06f97 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-05drivers/intel/mipi_camera: Fix SSDT generation for IPU devicesSugnan Prabhu S
Includes changes in mipi_camera driver to fix following issues related to SSDT generation for IPU devices. 1. acpigen_write_device was not getting called for IPU devices 2. acpigen_pop_len was called for a generic devices without calling acpigen_write_device Change-Id: I309edd065719cb8250f1241898bb5854004d2a9f Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44025 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-05sb/intel/i82801{gx,ix,jx}/acpi/lpc.asl: Drop dead codeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Also drop a now-unnecessary #undef directive from one mainboard. Change-Id: I613e77723d108641f16ec732358849c3bc0e49e0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43220 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-05{sb,soc}/intel/*/acpi/lpc.asl: Drop commented-out codeAngel Pons
This code has been commented out for a long time. Drop it. Change-Id: Iddc635dc5bbc7a8b42e97f4e2f6d579a839d874b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43264 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-05{nb,soc}/intel: Use get_current_microcode_rev() for ucode versionSubrata Banik
This patch removes all redundant read microcode version implementation from SoC directory and refer from cpu/intel/microcode/microcode.c file. TEST=Able to get correct microcode version. Change-Id: Icb905b18d85f1c5b68fac6905f3c65e95bffa2da Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44175 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-05mb/google/volteer/var/voxel: Add Raydium touchscreen supportDavid Wu
Update gpio GPP_E7 and enable the Raydium TS support BUG=b:157402209,b:162632701,b:162636271 BRANCH=master TEST= 1. emerge-volteer coreboot chromeos-bootimage 2. boot up on voxel DUT and make sure the raydium TS can work. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I377aded4982ece71f4dabb58f307f68c713edcd2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
2020-08-05mb/google/vilboz: update telemetry settings for vilbozPeichao Wang
update telemetry value for SDLE test result. BUG=b:160698427 BRANCH=None TEST=emerge-zork coreboot Change-Id: Icce57f9be2732ff79f336daa6c447a30247366cf Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-05drivers/genesyslogic/gl9763e: Add driver for Genesys Logic GL9763EBen Chuang
The device is a PCIe to eMMC bridge controller to be used in the Chromebook as the boot disk. The datasheet name is GL9763E and the revision is 02. The patch sets single request AXI, disables ASPM L0s and enables SSC. Signed-off-by: Ben Chuang <benchuanggli@gmail.com> Change-Id: I158c79f5ac6e559f335b6b50092469c7b1646c56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-05mb/google/zork: keep the c-state IO base address alignmentChris Wang
Align the C-state MSR value of BSP with AGESA. BUG=b:162705221 BRANCH=none TEST=Check the MSR value is correct and BSP can enter CC6 with AVT tool Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Ib98d34af518439d338326446c20601867ad31690 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-05mb/google/zork/ezkinil: Fix ELAN touchscreen ACPI nodeLucas Chen
a. USI_REPORT_EN is no longer set to high in coreboot. Instead GPIO_144 is exposed as stop_gpio in ACPI to allow OS to control this pad as required. b. Add Delay after stop_gpio Low - 300ms BUG=b:162263398 Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Change-Id: I3d4dcb6e5cae5d9515abfd415315ec4114ca80b4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44107 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-05src: Use space after 'if', 'for'Elyes HAOUAS
Change-Id: I5d3a5ede47aefc7cc2ee330f8a0bcded16138764 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44173 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-05src: Use space after switch, whileElyes HAOUAS
Change-Id: I150591aa3624895c4c321101a251547dd23d1db5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44172 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-05src/soc/intel/common: Make top_of_ram till TOLUD region mmio_resourceSubrata Banik
Ideally don't need to mark the entire top_of_ram till TOLUD range (used for stolen memory like GFX and ME, PTT, DPR, PRMRR, TSEG etc) as cacheable for OS usage as coreboot already done with mpinit w/ smm relocation early. TEST=Able to build and boot ICL, TGL RVP. Without this CL : PCI: 00:00.0 resource base 77000000 size 4800000 align 0 gran 0 limit 0 flags f0004200 index 9 PCI: 00:00.0 resource base 7b800000 size 4400000 align 0 gran 0 limit 0 flags f0000200 index a With this CL : PCI: 00:00.0 resource base 77000000 size 8c00000 align 0 gran 0 limit 0 flags f0000200 index 9 No changes observed with MTRRs snapshot. Change-Id: I64c14b14caf0a53219fdc02ec6bbd375955a0c8e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-05baytrail mainboards: Clean up mainboard.cArthur Heymans
This cleans up some unneeded no-ops in the mainboard.c files of baytrail boards. Change-Id: I7662f6e860d672a99b211488122bec073cc78acf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Máté Kukri <kukri.mate@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-05include/device/azalia_device.h: Include <stdint.h>Elyes HAOUAS
This file only needs <stdint.h>. So replace <types.h> with <stdint.h>. Change-Id: Ib58532837941d5324b28bc2c607d70555ce9caee Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44134 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-05mb/google/zork: update DRAM SPD table for dirinbozKevin Chiu
DRAM support list 0x00 HYNIX HMA851S6CJR6N-VK 0x01 HYNIX H5ANAG6NCMR-VKC 0x02 Samsung K4A8G165WC-BCTD 0x03 Samsung K4AAG165WB-MCTD 0x04 Samsung K4A8G165WC-BCWE 0x05 HYNIX H5AN8G6NDJR-XNC 0x06 HYNIX H5ANAG6NCMR-XNC 0x07 Micron MT40A512M16TB-062E:J 0x08 Micron MT40A1G16KD-062E:E 0x09 Samsung K4AAG165WA-BCTD 0x0A Samsung K4AAG165WA-BCWE BUG=b:161579679 BRANCH=master TEST=build Change-Id: Ib9fa5ae98568d659326d431a4006174a343fa299 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-05soc/intel/common: Include Alder Lake device IDsSubrata Banik
Add Alder Lake specific CPU, System Agent, PCH (Alder Point aka ADP), IGD device IDs. Document Number: 619501, 619362 Change-Id: I17ce56a220e4dce2db2e0e69561b3d6dac9e65a2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-04nb/intel/x4x: Define and use `HOST_BRIDGE` macroAngel Pons
Other Intel northbridges do this. Tested with BUILD_TIMELESS=1, Asus P5QL PRO does not change Change-Id: I50785b7bf3e3cc0eade7fda4b4b2e2bb71a54c31 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-04Revert "device/pci_device.c: Do not complain about disabled devices"Nico Huber
This reverts commit ad247ac5d8ef4a38bd1d61fbd28076f343a46c5c. It doesn't work like this. The `dev->enable` field has already been updated and is always `0` at this point. Change-Id: I5b3560dcea2f226c841f4823526db2fdab149d22 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-04soc/intel/skylake: Add RMRRs after all DRHDsAngel Pons
The VT-d architecture specification (Doc. D51397-011, Rev. 3.1) says: BIOS implementations must report these remapping structure types in numerical order. i.e., All remapping structures of type 0 (DRHD) enumerated before remapping structures of type 1 (RMRR), and so forth. So, update the corresponding code to adhere to the specification. Change-Id: I2446d536603559f637f3f8b1b44e9d712aa35492 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-08-04soc/intel/broadwell: Add RMRRs after all DRHDsAngel Pons
The VT-d architecture specification (Doc. D51397-011, Rev. 3.1) says: BIOS implementations must report these remapping structure types in numerical order. i.e., All remapping structures of type 0 (DRHD) enumerated before remapping structures of type 1 (RMRR), and so forth. So, update the corresponding code to adhere to the specification. Change-Id: Ib5ef5e006e590d72bec52e057e9b72150e0e636f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-08-04soc/intel/apollolake/acpi.c: Add RMRRs after all DRHDsAngel Pons
The VT-d architecture specification (Doc. D51397-011, Rev. 3.1) says: BIOS implementations must report these remapping structure types in numerical order. i.e., All remapping structures of type 0 (DRHD) enumerated before remapping structures of type 1 (RMRR), and so forth. So, update the corresponding code to adhere to the specification. Change-Id: I4ee3ae6c45e2a2c921fbccbb62b853e4a141a58d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-08-04nb/intel/sandybridge/acpi.c: Add RMRRs after all DRHDsAngel Pons
The VT-d architecture specification (Doc. D51397-011, Rev. 3.1) says: BIOS implementations must report these remapping structure types in numerical order. i.e., All remapping structures of type 0 (DRHD) enumerated before remapping structures of type 1 (RMRR), and so forth. So, update the corresponding code to adhere to the specification. Change-Id: I1f84cae41c6281e0d545669f1e7de5cab0d9f9c0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-08-04nb/intel/x4x: Remove dead assignmentsAngel Pons
The call to `decode_pcie_bar` always initializes these values. Change-Id: Iffdb2fc846a6fc1a1abc504370b6283e292b61c0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-04soc/amd/picasso/acpi: clean up global NVSFelix Held
Some fields in GNVS seem to be copied over from Apollolake to Stoneyridge to Picasso. This patch removes the unused fields. BUG=b:161165393 TEST=Mandolin still boots and dmesg shows no new ACPI errors. Change-Id: I8c6b580543089bf0180a7caeb9e6a47dc4ed4a1d Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44154 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-08-04nb/intel/x4x: Refactor `decode_pcie_bar`Angel Pons
Constify and eliminate local variables where possible to ease reading. Tested with BUILD_TIMELESS=1, Asus P5QL PRO does not change. Change-Id: I6d2937146a4764823cfc45c69a09f734b2525860 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-04nb/intel/ironlake/acpi.c: Factor out PCIEXBAR decodingAngel Pons
Other northbridges have a `decode_pcie_bar` function. Since it's not needed anywhere else, keep it as a static function for now. Change-Id: Ide42ffcebb73c3e683e0ccaf0ab3aeae805d1123 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-04nb/intel/i945: Deduplicate PCIEXBAR decodingAngel Pons
We can use `decode_pcie_bar` instead, if we make it non-static. Change-Id: Ic39f3df0293b4d44f031515b1f868e0bb9f750c9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44145 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-04nb/intel/i945: Refactor `get_pcie_bar`Angel Pons
Turn it into `decode_pcie_bar`, taken from gm45. Change-Id: I81a398535f18ced10b5521bddcf21f3568e1d854 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-04nb/intel/haswell: Use ASL 2.0 syntaxAngel Pons
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 does not change. Change-Id: I9c69028ff13efa6999b6110fbcd9233a09def991 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44152 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-08-04sb/intel/i82801gx: Use PCI bitwise opsAngel Pons
While we are at it, also reflow a few lines that fit in 96 characters. Tested with BUILD_TIMELESS=1, Getac P470 does not change. Change-Id: I2cc3e71723e9b6898e6ec29f0f38b1b3b7446f09 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-04nb/intel/ironlake/acpi/hostbridge.asl: Use ASL 2.0 syntaxAngel Pons
This brings Ironlake closer to Sandy Bridge. Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change. Change-Id: Idde75e7295f642f8add34168bffe5851ea02fbc6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43687 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-04nb/intel/sandybridge: Update to ASL 2.0 syntaxAngel Pons
Tested with BUILD_TIMELESS=1, Lenovo ThinkPad X230 remains identical. Change-Id: Ie3570cd0a75c6b34581b35165c1c6393214ad0bb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44151 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-08-04nb/intel/x4x: Change signature of `decode_pciebar`Angel Pons
Rename it and make it return an int, like other northbridges do. Change-Id: I8bbf28350976547c83e039731d316e0911197d54 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-04nb/intel/haswell: Deduplicate PCIEXBAR decodingAngel Pons
Add `decode_pcie_bar` for consistency with other Intel northbridges. Change-Id: If04ca3467bb067b28605a3acccb8bda325735999 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-04nb/intel/pineview: Refactor `decode_pcie_bar`Angel Pons
Constify and eliminate local variables where possible to ease reading. Tested with BUILD_TIMELESS, Foxconn D41S remains identical. Change-Id: Iaad759886a8f5ac07aabdea8ab1c6d1aa7020dfc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44140 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-04nb/intel/pineview: Change signature of `decode_pciebar`Angel Pons
Rename it and make it return an int, like other northbridges do. Change-Id: Id526ff893320a77e96767ec642c196c2196f84e1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-04nb/intel/pineview: Use `MiB` definitionAngel Pons
Also constify a local variable while we're at it. Tested with BUILD_TIMELESS=1, Foxconn D41S does not change. Change-Id: I90ab35932d7c0ba99ca16732b9616f3a15d972dd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-04mb/google/zork/var/vilboz: Enable support for garaged stylusFurquan Shaikh
This change adds support for pen insert/eject operations in S0 and wake on pen eject from S3 for vilboz. BUG=b:157628650 Change-Id: I7ba0881b67dfb67c032667d591f7d1806a50af22 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-04mb/kontron/bsl6: Add new Skylake COMe moduleNico Huber
Add Kontron/bSL6 together with Siemens/Boxer26, a baseboard for the bSL6. The plain bSL6 variant received little testing and only during early development. The Boxer26 variant is actively used and fully tested. The latest rebase was boot tested with FILO and Linux 4.19. Change-Id: If2b6a3f1e9dd095463f1f1521068b9f66a9189c5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29480 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 14:36:00 +0000