| Age | Commit message (Collapse) | Author |
|---|
|
They're pretty annoying.
Change-Id: I44d26dc168927a9cedfd6ecc4c9a51a3a7b362c7
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4662
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Ability to choose compatibility mode is interesting for testing payloads and
OS for compatibility with older systems.
As per comments
"ide_legacy_combined # TODO: Does nothing since
generations, remove from sb code?"
The "combined" mode was removed. It wasn't used by any mobo and the code for
it is almost identical to IDE one other than few bits relating to interrupt
handling and ISA mode.
Change-Id: I407a8fac753b513812a86bef5abcf39c6d81472e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4658
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I3c89bb633c32a2c2db349cb4fcbe1ed1c8deb5af
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4657
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Useful for accessibility.
Sticky modifier (sticky Fn) is a behaviour of modifier key when
you don't have to hold it pressed to achieve the result. E.g.
with normal Fn brightness up is:
<Press Fn> <Press Home> <Despress Home> <Depress Fn>
With sticky Fn you can do:
<Press Fn> <Depress Fn> <Press Home> <Despress Home>
Change-Id: I4da5adcea02428d936023891de08684cae77c44e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4661
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Tested on my X201 and X230.
Change-Id: I3c7ec65681157d15c6e87eea64779a08e03ae5a8
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4660
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Number one reason to use cbfs_get_file was to get file length.
With previous patch no more need for this.
Change-Id: I330dda914d800c991757c5967b11963276ba9e00
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4674
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I5b93e5321e470f19ad22ca2cfdb1ebf3b340b252
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4659
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
wwan_enable was never used.
wlan_enable isn't something for device tree but for CMOS config if at all.
Change-Id: I765d9d6f0b73b7dc5a57c0c630a53b4b7a0b48cb
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4651
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This changes eliminates a warning from the ASL compiler.
Change-Id: I502cca731b6b4cd3e17c57fc191f1eed10a5a1fe
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/4093
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
IS_ENABLED() requires the full define (incl. CONFIG_ prefix)
but isn't needed here.
Change-Id: I91d504367c75ce3fcecc6fa2499afaa0896595d3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4646
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Remove sprintf as if you can't easily use snprintf then you probably
have buffer overflow.
Change-Id: Ic4570e099a52d743aca938a2bfadb95981adc503
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4280
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
THis reduces risks of bufer overflows.
Change-Id: I77f80e76efec16ac0a0af83d76430a8126a7602d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4279
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
snprintf is a safe variant of sprintf. To avoid buffer overflows
we shouldn't use sprintf at all. But for now let's start by
implementing snprintf in first place.
Change-Id: Ic17d94b8cd91b72f66b84b0589a06b8abef5e5c9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4278
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
|
|
The other port is not easily accessible.
Change-Id: I6ea31346a375debcd5fc1c27e4078e3a436715e3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4635
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
DRAM reset gate GPIO is different on different mobos move it to hidden config
with 60 (current value) as default.
Set it to 10 for Lenovo X201.
Change-Id: I4f3b6876d7c33d4966315091b63a76a9a0064c16
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4622
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The memory initialization code is a work in progress for uboot, so we
only import the bits needed to get RAM up and running. Any refactoring
is cosmetic, and any functional refactoring should be done in separate
patches, and preferably, in coordination with the sunxi team.
Since it's not yet determined if we should initialize memory during
the bootblock or romstage, we don't add raminit to the build just yet.
Change-Id: I2ec1821942c6970150a02fa3806a257da649e1c9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4597
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
PLL5 is special in that it controls the DRAM clock, and requires a
fine-grained low-level control which will be needed by raminit code.
This change also brings functionality which will be needed by
raminit.
Change-Id: I25ecc91aa2154e504ceebb9003a5e5728d47f4a3
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4593
Tested-by: build bot (Jenkins)
|
|
Even though the Allwinner A10 is limited to a 24KiB bootblock, the
memory initialization takes only about 3KiB and leaves enough room for
an MMC or NAND driver, so init the memory early on. The advantage is
that we can eliminate complicated logistics of where to cache CBFS and
where to load the ramstage in SRAM.
Change-Id: Id549552ed509434e831db60deaef28e04d62417f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4630
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The CPU was clocked at 384MHz in the bootblock, but the AHB bus has a
maximum rated frequency of 250MHz. Its clock needs to be divided to
keep it within spec. Overclocking the AHB bus hung the CPU when
memory was accessed.
Change-Id: I7cb9cdd1f126b3d5b0446fc68af79b54946bc2d3
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4629
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I807060bde374e4a42abe306cecf838ab157c9515
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4600
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I9473a6e574c3af02d154a7e30245f0dc0b238300
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4599
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I2b857d3b4c01e39c62e54f753e400e6049f1dbc9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4598
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: Iafbd253235db3914b9382fdb41de2622ef83c6d8
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4596
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I4825f0d57696cd28751c59ae133b7e3315fb78e5
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4595
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This bit is not documented in the datasheet, but is used in the
upcoming RAM init code.
Change-Id: I697ec222496236ac7690460ee62313ab8b1a2f0b
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4592
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I11b10301199e5ff1a45d9b7d2958cc7b6667a29c
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4588
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Rather than having to track which bit in which register should be
cleared or set to gate or ungate the clock to a certain peripheral,
provide a simplified enum which encodes the register and bit. This
change comes with a function which decodes the enum and gates/ungates
the clock.
This also removes the register-dependent bitmasks for APB0 and APB1
gating registers.
Change-Id: Ib3ca16e54eb37eadc3ceb88f4ccc497829ac34bc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4571
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Include a function to multiplex more than one pin at a time. This
is useful for peripherals that have the same function number for
all their pins.
Since we now have two functions for muxing pins, also document
them.
Change-Id: I53997cc3a2586e3cf749cd672f69fb427659c67f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4565
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We have 32KiB of usable SRAM right when we boot. The first 24KiB can
be loaded with our bootblock, while the other 8KiB can be used as
stack during the bootblock stage.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Change-Id: I48d3a37869031c3c1dbc1fab71204d473d64deeb
Reviewed-on: http://review.coreboot.org/4563
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add a minimal infrastructure which initializes the system clocks
and serial console.
Change-Id: I768ede6ccf8674ffe9fecd8925cec89768209cab
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4553
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add minimal support needed to get a bootblock capable of initialising
a serial console.
Change-Id: I50dd85544549baf9c5ea0aa3b4296972136c02a4
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4549
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
CBMEM console buffer size is adjustable in menuconfig, but this would
not correctly adjust the overall allocation made for CBMEM.
HIGH_MEMORY_SIZE is aligned to 64kB and definitions are moved down in
the header file as HIGH_MEMORY_SIZE is not used with DYNAMIC_CBMEM.
Try to continue boot even if CBMEM cannot be created. This error would
only occur during development of new ports anyways and more log output
is better.
Change-Id: I4ee2df601b12ab6532ffcae8897775ecaa2fc05f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4621
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
|
|
This function was for logging only, but we have both base and size
already logged elsewhere.
Change-Id: Ie6ac71fc859b8fd42fcf851c316a5f888f828dc2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4620
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Handler is ACPI/x86 specific so move details out of cbmem code.
With static CBMEM initialisation, ramstage will need to test for
S3 wakeup condition so publish also acpi_is_wakeup().
Change-Id: If591535448cdd24a54262b534c1a828fc13da759
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4619
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Options for selecting the USB port and controller for usbdebug
were unintentionally hidden with commit 8232bc2c on AGESA platforms
using cimx/sb700 or cimx/sb800.
Change-Id: Ibacc81a580519fe7fa86f08374046625327340b4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4607
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
It should be possible to put coreboot compiled for smaller chip by
putting it at the end of bigger chip. We already have chip size in
flash->size. Use it.
Tested on Lenovo X230.
Change-Id: If8ff03ed72671a9f2745ed4e759a04e83aa7cc37
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4612
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ib5bac45ee7aa5492c10fa97cd75b828b6192250d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4604
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I14a2ac47198be6359b4f10b38f1cf86c9917d67e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4602
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Due to recent restructuring X201 native video init has disappeared from
config options. Put it back and fix compilation with it.
Change-Id: I6d9ba5da196c093abd2df89a6fe5efefece1fb3c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4606
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I74be0dbbf8d99f58ac28bfac281ccd27d1500078
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/4608
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I66d0715f3be201f8068acd7097e2be49185bee00
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/4574
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The asrock/imb-a180 mainboard is the first mainboard to use this
w83627uhg/nct6627UD sio. The default h/w clock setting is 0. Adding
the SIO in the mainboard Kconfig made the builder complain that the
set_uart_clock_source() wasn't being used. So the calls to that function
were uncommented.
Change-Id: Iedba035237c5c0fa230b02ff4799bb8c1b7bbd4a
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/4573
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Gizmo is a AMD-Family14 based board. More information can
be found at www.gizmosphere.org
Change-Id: I5cfd161b4f408be1f65cf332b083ed7c79a99cfd
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/4536
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Place this in header so it works also when raminit_f.c and
raminit_f_dqs.c are not #included in romstage.c build.
The workaround remains to be disabled for all boards.
Change-Id: Iff0271ceb21ee1e28a1a31d6bbdb97e29d76461e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4568
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Do it just to remove MEM_TRAIN_SEQ test under mainboard/ to see all
K8 rev F boards do the same things here.
Change-Id: If75035a4ef8882c2618d434d83ba59c408593d86
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4567
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I601efbff03d0f0f59557b33be8d6928ede310b62
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4558
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Ie109f58bd8ce54754b8d0b00118e75ace8717df0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4566
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
K8 Rev F raminit code cannot be built without RAMINIT_SYSINFO,
so have the option enabled together with K8_REV_F_SUPPORT.
Also move the option under AMD K8.
Change-Id: I91fa0b4ae7e3e54fbcb4a4f91eb043956cd0fb60
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4582
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
AMD fam10 raminit cannot be built without RAMINIT_SYSINFO, this
is not a true option but copy-paste remainder from AMD K8.
Change-Id: Id8edc112f3bacebd1732304ac9ee6e77cc6263b7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4581
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Option is for AMD K8 only.
Change-Id: Ic55288b3cae2c9bf4f347037e7bf5d9bfcf16689
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4580
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
K8_REV_F_SUPPORT is already set by all affected sockets, (AM2, F, S1G1).
Change-Id: If42a4178263d90a4e195fae0c78943ac9eda1ad6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4557
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The comment was copied around so fix all occurrences using the following
command.
$ git grep -l accessm | xargs sed -i 's/accessm/access/g'
Change-Id: I46e117c126c0f851cd5e95cf9e42a77ca5f80996
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/4577
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This config was for AMD K8 only.
Change-Id: Ic1ce60041fef6ddee2dae0e3559fb78f088740af
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4556
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This config was for AMD K8 only.
Change-Id: I76276405b676d1dd4d5dbf8c5b94194a670ccb25
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4555
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: Ib3a69e3364418426438f88ba14e5cf744e2414fa
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4524
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I5f4bf9dbaf3470dc83d3e980bb6cab10801e15c1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4523
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
No MTRRs on this platform.
Change-Id: Iaef57c8013ae9d40f3b063aae284b3faeeaa43dd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4572
Tested-by: build bot (Jenkins)
Reviewed-by: Andrew Wu <arw@dmp.com.tw>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The main purpose of option rom is to supply int* handlers.
But supplying those is outside of coreboot scope and if someone needs those
they should run SeaBIOS anyway which runs the option roms wonderfully.
Running VGA oprom is kept because they're needed to init graphics.
This patch still keeps the options to include the option roms to make them
available to SeaBIOS.
Change-Id: I646334cf88094d3bf8f527779a68a07e0b4b93ec
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4545
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Kevin O'Connor <kevin@koconnor.net>
|
|
If there is trouble setting up usbdebug, it may be useful to delay
usbdebug init to run in ramstage.
Change-Id: I31de5a06d3f9ce19f71c422cce0c8cb0fd50f396
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4488
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Clean up superfluous line terminators.
Change-Id: If837b4f1b3e7702cbb09ba12f53ed788a8f31386
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/4562
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
When assembling microcode , the rule to link individual object files into
one larger file only passed the first dependency to the linker. As a results
only microcode from one object file would actually get linked. This is fixed
by replacing $^ with $+ inside the make rule.
Change-Id: I65c0565f2e03777af23e530c08d1241804ca19b1
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4500
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Originally, Vortex86EX PCI S/B internal resource reservation functions can
only support one big legacy I/O device space (0-0xfff).
Change function signature to support other non-legacy I/O device space in
the future.
Change-Id: I22f5c877ed441d59f29801d925ee40b24fb796ce
Signed-off-by: Andrew Wu <arw@dmp.com.tw>
Reviewed-on: http://review.coreboot.org/3976
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The end of the _PS0 method that is supposed to transition the
XHCI device to D0 state is instead putting it in D3 state.
This triggers a PME_B0 GPE which causes a Notify to the XHCI
ACPI Device in the kernel and that increments the wakeup counter
and causes aborted suspends.
Instead if we just leave the device in D0 where it should be
after executing this function then the PME_B0 is not generated
and the kernel does not see a wakeup on XHCI.
Similarly I changed the _PS3 method to always put the device in
D3 at the end of the method, rather than depending on the state
to be D3 at the start.
Before this change the kernel would see the following sequence
when trying to suspend when the XHCI controller is in D3cold:
kernel: ACPI: Execute Method [\_SB_.PCI0.XHCI._PS0] (Node ffff88017802bf28)
kernel: evmisc-0169 [07] ev_queue_notify_reques: Dispatching Notify on [XHCI] (Device) Value 0x02 (Device Wake) Node ffff88017802bc30
kernel: evmisc-0169 [07] ev_queue_notify_reques: Dispatching Notify on [EHCI] (Device) Value 0x02 (Device Wake) Node ffff88017802b8e8
kernel: evmisc-0169 [07] ev_queue_notify_reques: Dispatching Notify on [HDEF] (Device) Value 0x02 (Device Wake) Node ffff88017802b1b8
kernel: xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
kernel: xhci_hcd 0000:00:14.0: PME# disabled
kernel: xhci_hcd 0000:00:14.0: enabling bus mastering
kernel: xhci_hcd 0000:00:14.0: setting latency timer to 64
kernel: PM: Wakeup pending, aborting suspend
kernel: last active wakeup source: 0000:00:14.0
Now it does not get a notification (due to PME_B0) when going to D0
on the way into suspend. XHCI goes from D3cold to D0 (in order to
be able to read mmio) and then back to D3hot before suspend.
kernel: ACPI: Execute Method [\_SB_.PCI0.XHCI._PS0] (Node ffff88017802bf28)
kernel: xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
kernel: xhci_hcd 0000:00:14.0: PME# disabled
kernel: xhci_hcd 0000:00:14.0: enabling bus mastering
kernel: xhci_hcd 0000:00:14.0: setting latency timer to 64
kernel: ACPI: Execute Method [\_SB_.PCI0.XHCI._S3D] (Node ffff88017802c000)
kernel: xhci_hcd 0000:00:14.0: PME# enabled
kernel: xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
kernel: ACPI: Execute Method [\_SB_.PCI0.XHCI._PS3] (Node ffff88017802bf50)
kernel: xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
Change-Id: Id5cd28eede2b27d97640047feb17349ae4ab79b7
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65236
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4448
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The coreboot and ACPI code that clears USB3 PORTSC change status
bits was not properly preserving the state of the PED (port enabled
or disabled) status bit, and it could write 0 back to this field
which would disable the port.
Additionally add back the code that resets disconnected USB3 ports
on the way into suspend (as stated in the BWG) but take care to
clear the PME status bit so we don't immediately wake.
suspend/resume with USB3 devices
1) suspend with no devices, plug in while suspended, then resume
and verify that the devices are detected
2) suspend with USB3 devices inserted, then suspend and resume
and verify that the devices are detected
3) suspend with USB3 devices inserted, then remove the devices
while suspended, resume and ensure they can be detected again
when inserted after resume
Change-Id: Ic7e8d375dfe645cf0dc1f041c3a3d09d0ead1a51
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65733
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4473
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The recommended value in docs is D2, but lynxpoint XHCI does not even
support D2 state which causes the kernel to think this device cannot
be used as a wake source:
kernel: xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
kernel: ACPI: Device does not support D2
kernel: xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
Additionally this means the kernel will never put the device into D3
state by itself. There is SMI code that will put the device into D3
before suspend so advertising D3 here should be correct.
With this change the kernel will put the controller into D3 on suspend
and back to D0 on resume, including executing the ACPI methods
for _PS0/_PS3 that contain chipset specific workarounds.
In addition add a _PSC method to directly return the D state from the
device registers. With ALL USB devices removed the XHCI controller
goes into D3 state and the kernel can have a hard time determining
the state of the device at boot.
A kernel compiled with CONFIG_ACPI_DEBUG=y and module parameters
acpi.debug_layer=0x7f acpi.debug_level=0x2f can be used to see
what ACPI methods are executed:
kernel: xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
kernel: ACPI: Execute Method [\_SB_.PCI0.XHCI._PS3] (Node ffff8801000a7f50)
kernel: ACPI: Preparing to enter system sleep state S3
...
kernel: ACPI: Waking up from system sleep state S3
kernel: ACPI: Execute Method [\_SB_.PCI0.XHCI._PS0] (Node ffff8801000a7f28)
kernel: xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
Change-Id: Ic64040eb4dd1947a1e2f0ee253a64be683e0ec70
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
meld with s3d
Change-Id: Ic6789720c4efe661dcb03a4afce8d88115854472
Reviewed-on: https://gerrit.chromium.org/gerrit/63916
Tested-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4409
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
- Put the device into D0 and not D3 so memory bar is available
and the subsequent commands actually do something useful
- Remove set of 818Ch[7:0]=FFh (gone in ref code)
- Fix reg 0x40/0x44 mixup
Verify that expected bits are set:
localhost ~ # pci_read32 0 0x14 0 0x10
0xe0500004
localhost ~ # mmio_read32 0xe0508144
0x000003ff
localhost ~ # mmio_read32 0xe050816c
0x000f0038
Change-Id: I388398e8c7d11e538ca18dab55d8bbd9b88f17df
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63801
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4408
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This commit adds a new Kconfig option for the LynxPoint
southbridge that will have coreboot route all of the USB
ports to the XHCI controller in the finalize step (i.e.
after the bootloader) and disable the EHCI controller(s).
Additionally when doing this the XHCI USB3 ports need
to be put into an expected state on resume in order to make
the kernel state machine happy.
Part of this could also be done in depthcharge but there
are also some resume-time steps required so it makes sense
to keep it all together in coreboot.
This can theoretically save ~100mW at runtime.
Verify that the EHCI controller is not found in Linux and
that booting from USB still works.
Change-Id: I3ddfecc0ab12a4302e6034ea8d13ccd8ea2a655d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63802
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4407
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Move this to the existing USB source files so they can share some
helper functions and keep the main smihandler code cleaner.
The XHCI sleep prepare code now implements the actual sleep
preparation steps from the ref code instead of the docs.
Change-Id: Ic90adbdaba947a6b53824e548c785b4fb3990ab5
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63800
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4406
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This ensures that the LCD FETs are off before we do graphics init.
FIXME: The location of the code is sub-optimal and should probably be
done in romstage, but there are __PRE_RAM__ considerations to take
into account.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I0844030d0a0e51eee1d29f1762f0b495777268df
Reviewed-on: https://gerrit.chromium.org/gerrit/64305
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: Ronald G. Minnich <rminnich@chromium.org>
Reviewed-on: http://review.coreboot.org/4470
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Assign correct parent PLL's for the following clocks:
ACLK_400_WCORE (MPLL->CPLL) (400 -> 333MHz)
PCLK_200_FSYS (MPLL->DPLL) (200 -> 200MHz)
MUX_ACLK_100_NOC_SEL (MPLL -> DPLL) (100 -> 100MHz)
ACLK_266 (DPLL->MPLL) (300 -> 266MHz)
ACLK_200_DISP1(MPLL->DPLL) (200 -> 200MHz)
ACLK_400_MSCL(MPLL->CPLL) (400 -> 333MHz)
ACLK_66 (MPLL->CPLL) (66.666 -> 66.6MHz)
MUX_ACLK_400_DISP1_SEL (CPLL->DPLL) (666 -> 300MHz)
MUX_MPHY_REFCLK (MPLL->OSC)
MUX_UNIPRO (MPLL->OSC)
MUX_MIPI1 (EPLL->OSC)
MUX_DP1_EXT_VID (EPLL->OSC)
MUX_FIMD1_OPT (EPLL->OSC)
MUX_IPLL(IPLL->OSC)
This also corrects the clock dividers for few of the clocks,
as the clock parent changes affect the final frequency of the
clocks.
This is ported from: https://gerrit.chromium.org/gerrit/#/c/62437/
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Ie833c01913d0961a6190446bd573511de8dee5f8
Reviewed-on: https://gerrit.chromium.org/gerrit/65620
Commit-Queue: Ronald G. Minnich <rminnich@chromium.org>
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: Ronald G. Minnich <rminnich@chromium.org>
Reviewed-on: http://review.coreboot.org/4469
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This reads the clock select field for MUX_ACLK_66_SEL in the
CLK_SRC_TOP1 register in order to obtain the source clock rate
for I2C peripherals. Before we were always assuming that the source
was the MPLL.
Unfortunately not all fields in the CLK_SRC_TOPn registers are
enumerated the same with regard to clock select. So this is just
a one-off for now.
This is basically ported from https://gerrit.chromium.org/gerrit/#/c/62443.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I9fa85194ae1a1fadab79695f059efdc2e2f1f75f
Reviewed-on: https://gerrit.chromium.org/gerrit/65611
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4468
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Increase SPLL to 400MHz from 300MHz as we set SPLL as the
switching parent for ARM and KFC. This value is as per
recommendation of the hardware team.
This is ported from https://gerrit.chromium.org/gerrit/62618
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I8a5a5b957083b0b1f3e3e318fe5753cf7ae19223
Reviewed-on: https://gerrit.chromium.org/gerrit/65432
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4464
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This re-factors clock_get_periph_rate() to be a simpler and also
make a few corrections along the way. To summarize:
- clk_bit_info is no longer used. It had numerous errors and was
really painful anyway since it was just a bunch of opaque magic
numbers that made bugs non-obvious.
- Clock source bitfields for peripherals handled in the switch
statement are 3 bits, not 4. Some divider values are 3 bits,
some are 4. The earlier code always assumed 4 bits for both
which included reserved bits in many cases.
- UART source clock and divider shift values were wrong.
- PWM clock divider was being read from the wrong register.
- SPI3 divider value was being read from the wrong register.
- There was a really confusing calculation for SDMMC0 and SDMMC2
clock rates, but it was never actually used since the switch
statement never handled PERIPH_ID_SDMMC{0,2} and would thus
return if they were ever passed into this function.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I0a03a64d8b42fbe83dbf377292597ce681b22f4b
Reviewed-on: https://gerrit.chromium.org/gerrit/65284
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4463
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This adds a helper function to translate between peripheral clock
select fields in clock source registers and PLLs. Some of this was
already done to handle a few special cases, this generalizes the
earlier work so that follow-up patches can do further clean-up.
Unfortunately, the PLLs represented by clock select fields in
various modules are not uniformly ordered. So for now we focus on
peripheral clock sources only.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Id58a3e488650d09e6a35c22d5394fcbf0ee9ddff
Reviewed-on: https://gerrit.chromium.org/gerrit/65283
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4462
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This patch adds CPLL and DPLL to the known list of PLLs.
This is ported from https://gerrit.chromium.org/gerrit/#/c/62617/
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I2f2614e44cd9c98d98b8db9347f29de21703d1af
Reviewed-on: https://gerrit.chromium.org/gerrit/65282
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4461
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This patch matches the User Manual Table 7-2 about the PMS value for
CPLL. This doesn't change the PLL frequency (before and after both make
666MHz) but this is the suggested PMSK values for obtaining 666.
(Suggested as per user manual).
This is ported from https://gerrit.chromium.org/gerrit/#/c/62438/
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Ia33e1971ab88da761000d443792560476514626b
Reviewed-on: https://gerrit.chromium.org/gerrit/65281
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4460
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Configure the pins for the UART unconditionally in the mainboard code (when we
know which UART to configure) instead of in the UART driver. This also means
the UART will work if later software wants to use it without setting up the
pins.
Built and booted on pit with the serial turned off and some serial init
in the kernel decompression stub fixed.
Change-Id: Icab5755e4f935f52d44b9cb3b43d1cb62acce08f
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/65299
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4457
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This patch implements the basic infrastructure required to use the USB
A-A firmware upload feature on Exynos5 processors with Coreboot. It will
require a corresponding host-side script that activates the feature and
uploads the correct image parts in the correct order to harcoded target
addresses, as described in the comments of alternate_cbfs.c.
Also fixes a bug in the Google Snow mainboard where it would not
correctly initialize the pinmux configuration for the SPI flash bus.
During a normal SPI boot the IROM would already do that for you, but
when booting from USB you have to do it yourself.
Change-Id: I40a39f8f5d1d70b58dbf258015c1653a27097d67
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/64875
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4456
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The ACTLR provides implementation defined configuration and control options for
the processor.
Change-Id: I74df1ed7887eb3f16a1b8297db998ec2f8b18311
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65107
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4447
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The existing GPIO config routines for SDMMC0-2 are over-generalized
and somewhat confusing as a result. It would work nicely if all SDMMC
ports were configured in the same fashion, but there are a few
exceptions.
For example, the inner function runs differently if we're using 8 bits
of data instead of 4, so a big chunk is skipped for SDMMC2. SDMMC0
requires SD_0_CDn to be an output rather than alternate function and
must have a value set.
This patch trades some verbosity for simplicy. Now the SDMMC GPIO
configuration a straight-forward sequence of GPIO operations
without any exceptions.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: If75075b24c6588c4c1b3be3fb9b1aa95e2fac2d1
Reviewed-on: https://gerrit.chromium.org/gerrit/65248
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4446
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
On Exynos5420 the MMC channel 0 is connected to eMMC
Which does not have a card detection pin. Also this pin
is connected as VDDEN to PMIC.
This is ported from https://gerrit.chromium.org/gerrit/#/c/60732/
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I19048d22b7dd00df1716b6b5b332a7eb70fe0836
Reviewed-on: https://gerrit.chromium.org/gerrit/65247
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4445
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
To configure multi-processors, we need the intrinsic functions to get core ID,
put core into idle state, and to wake up cores.
Change-Id: I87a62dab6efd6c8bb0c8e46373da7c7eb7b16b35
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65112
Reviewed-on: http://review.coreboot.org/4444
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This initializes the APLL at 1800MHz.
Change-Id: I366bf4e75510847ab93d9c9f214a49c731cca08a
Reviewed-on: https://gerrit.chromium.org/gerrit/64745
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4443
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Switch ARM clock source when changing the APLL frequency to avoid
stability issues.
This is ported from https://gerrit.chromium.org/gerrit/#/c/64189/5
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I923107555e6d3287b3694cbf9e4bb548d3e5f4a8
Reviewed-on: https://gerrit.chromium.org/gerrit/64838
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4442
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This patch does the following for the A15 cores:
- Disable clean/evict push to external
- Enable hazard detect timout
- Prevent gating the L2 logic clock
This is ported from https://gerrit.chromium.org/gerrit/#/c/60154
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I7ac9f40acecfa7daee6fb81772676bf5119d0536
Reviewed-on: https://gerrit.chromium.org/gerrit/64862
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4441
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I6729a139091b40d8fd9ba2aa7a8c4e14216d95c5
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/64879
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Stefan Reinauer <reinauer@google.com>
Tested-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/4440
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This bus is hooked up on snow and, as it's the only bus hooked up on some
other boards, having it available in firmware to test is handy.
Change-Id: Icb48b9af4a67d382bd6fbce1e4c6a320d811d365
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/64877
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@google.com>
Tested-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/4438
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This adds inline wrappers to read the L2 cache auxiliary control
register (L2ACTLR).
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Iec603d7c738426232f7ce3a4a474d01c85fa3f2f
Reviewed-on: https://gerrit.chromium.org/gerrit/64861
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4437
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I128e3ecc3773fe7c28616e93ef60b48c5862f302
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/64839
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4436
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
On ARM, if the .car section is marked as NOLOAD, there's nothing that sets it
to zero. Some code in the cbmem console depends on a global variable being
zero initially, and if that's not true bad things happen.
Change-Id: Ic72a9fb0ee0c5a608190be6f24d0d7de7c34fc1f
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/64769
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4435
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This divides the CPU frequency by 1,000,000 instead of 2^20.
serial console shows "CPU: S5P5420 @ 800MHz" instead of
claiming 762MHz.
Change-Id: I70cc5b62f689c5553b57c82be61233fb9f733f6e
Reviewed-on: https://gerrit.chromium.org/gerrit/64743
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4434
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The memory corruption problem in Exynos suspend/resume process is caused by two
things together: PHY_RESET and MRS command.
After stop sending MRS on resume, we can now remove the workaround of skipping
PHY_RESET.
Change-Id: I64acc27c1d2bb549ae6ad7d32ecda94b0355972c
Reviewed-on: https://gerrit.chromium.org/gerrit/64736
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/4433
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This includes the new dp code, which is better, and the fimd code,
which is changed and improved. We took the chance to remove un-needed
files, and also to remove some foolish u-boot habits, but not all of
them. That will take time.
With these changes we get graphics.
Since the only mainboards we have with 16 bit graphics are 5:6:5,
adjust edid.c to just use that format. If at some future time we need
4:4:4, which seems unlikely, we'll need to add a function to adjust
the lb_framebuffer. Note that you can't just divine this from the EDID,
as the graphics pipe format need not match the actual final format used.
The EDID reading works. We've been requested to support hard-coded
EDIDs and that will come in the next revision. Currently the hard-coded
EDID is ignored for testing.
Change-Id: Ib4d06dc3388ab90c834f94808a51133e5b515a4d
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/64240
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Tested-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4432
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Remove kirby from our tree. It's dead.
BUG=none
BRANCH=none
TEST=none
Change-Id: I0768a9ea40be5d70d845a46f6e28036a133b7aa6
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/176030
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/4548
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The kernel assumes that trust zone is disabled.
Change-Id: Ia8d6fa69adcb812a747d8b89eb77e57144423eaa
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/64722
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: Ronald G. Minnich <rminnich@chromium.org>
Reviewed-on: http://review.coreboot.org/4431
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This ensures that various trust zone things are reset,
which is important because the kernel assumes they are.
Change-Id: Ie02ea89885621f58a3ccc4f1729617208a264153
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/64697
Tested-by: Ronald G. Minnich <rminnich@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4430
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The CBMEM console pointer in romstage is actually a zero byte array.
This means CBMEM area has to live at the end of the allocations or
else CBMEM console will overwrite whatever comes after it.
Change-Id: Icc59e982b724a2d396370c3a5abd8898e08baf26
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/63997
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/4428
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This update the PMIC write sequence to be correct for newer board
revisions.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I2210b0d1945fb19c96a674c8fad1b0ff5a4a381e
Reviewed-on: https://gerrit.chromium.org/gerrit/64304
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4427
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The current function seems to be outdated...
Signed-off-by: David Hendricks <dhendrix@chromium.org>
built and booted. Now we see "CPU: S5P5420 @ 762MHz"
instead of "CPU: S5PC420 @ 762MHz"
Change-Id: Ieb103a5fa62bda9a6b2cbd9a82fb4f72c5dd6466
Reviewed-on: https://gerrit.chromium.org/gerrit/64302
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4425
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This corrects a minor typo used for a part number.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I8583cbfc3b4a6c3ad06419f5aab3ba7a8f685575
Reviewed-on: https://gerrit.chromium.org/gerrit/64301
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4424
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
