summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2019-05-29Clean up unused arch/early_variables.h headerArthur Heymans
Change-Id: Ib863e23863ba6d7504b6c4d32de2f1fea4e57fec Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-29soc/intel/apollolake: Don't use CAR_GLOBALArthur Heymans
All platforms using this code have NO_CAR_GLOBAL_MIGRATION. Change-Id: I0f393385aa94f18c2e05af3b5a54999575323d18 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-29intel/sandybridge: Make timC training more robust.Tobias Diedrich
When using native raminit with https://review.coreboot.org/#/c/22683/ I've found that timC training usually fails unless the ram is overspecced (i.e. DDR3L-1600 rated for 1.35V works most of the time with native raminit as DDR3-1333 @1.5V). Looking at the training data I've found that during timC training it is reading register values in the 0-4000 range and checking for runs of 0, but with the failing training the values don't go all the way down to 0. The solution for me has been to do a thresholing pre-pass, after which both the DDR3-1333 @1.5V and the DDR3L-1600 @1.35V work fine for me. Tested: - Intel NUC DCP847SKE - RAM slots with 2x4GB Kingston KVR1333D3S9/4G (DDR3-1333 1.5V), boots fine with native raminit @1.5V - RAM slots with 2x4GB Kingston KVR16LS11/4G (DDR3L-1600 1.35V), boots fine with native raminit @1.35V - Casual use with these settings - Tested on Lenovo T520 with Crucial HyperX DDR3-1833. - Memtest86+ stable. Change-Id: I9986616e86560c4980ccd8e3e549af53caa15c71 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/22776 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-05-29mb/gigabyte/ga-b75m-d3{h,v}: Switch to variant setupAlex James
The Gigabyte GA-B75M-D3H/D3V mainboard trees share a lot of duplicate code, and can serve as a base for porting other Gigabyte 7 series motherboards. Switch the Gigabyte GA-B75M-D3H/D3V mainboard trees to a variant setup, defining ga-b75m-d3v as a variant of ga-b75m-d3h. Signed-off-by: Alex James <theracermaster@gmail.com> Change-Id: Ia175207a2568aefe1aa9bd8d4d990de6a26f1657 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-05-29mb/google/sarien: Send post code to the ECEric Lai
Use the mainboard post code hook to inform the wilco EC driver of the every stage. BUG=b:124401932,b:133466714,b:133600566 BRANCH=sarien TEST=Remove DIMM module, confirm diagnostic LED pattern for memory failure (2 amber, 4 white). Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: Ic71e4a6e62b63ca2fd189957c4d6f49b61b934de Reviewed-on: https://review.coreboot.org/c/coreboot/+/33047 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-29arch/x86: Do not add properties to null DP packagesJacob Garber
It doesn't make sense to add a property to a non-existent Device Property package. However, some of these functions will proceed anyway and allocate a new Device Property package, add the property to that, and then immediately leak the new package. This changes all the acpi_dp_add_* functions to ignore a null package. Change-Id: I664dcdbaa6b1b8a3aeb9a0126d622e2ffb736efd Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 135745{6,7}, 138029{2-6} Reviewed-on: https://review.coreboot.org/c/coreboot/+/32971 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-29mb/google/poppy/variants/nami: Disable FPMCU for non-fingerprint variantsIvy Jian
Even fingerprint device probe failed on non-fingerpint boards,the CRFP driver still register the device that cause the GPE#1 as wake source every time. Override devicetree for non-fingerpirnt variants to avoid unexpected wake event(GPE#1). BUG=b:129650040 BRANCH=firmware-nami-10775.108.B TEST=Boots to OS and check no GPE#1 wake event from eventlog when S0ix exit. Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I6fa96e04a34e296889414b96a8c604fc61b8a236 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33017 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-29nb/intel/nehalem: Call smm_region_start() functionArthur Heymans
This also removes the unnecessary mask. TEST: X201 Boots again. Change-Id: Ia637bd01cd7dc1aecd1a87a739d5243c70419553 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-29drivers/intel/fsp2_0: Fix typo mistakeSubrata Banik
Change-Id: I90f595d7d789429c8717261c6edb6c756f6c0e1f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33056 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2019-05-28soc/intel/cannonlake: Dump ME status info before notify EndOfFirmwareBora Guvendik
Dumping ME status displays wrong information if we disable Heci1 because it is called after fsp notifies EndOfFirmware and disables Heci1. This patch moves the ME status dump before fsp notify EndOfFirmware. TEST=Boot to OS, check ME dump information Change-Id: Ifd8b18a41c502c4ecfb84698a7669028394589fd Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-05-28mb/google/sarien: Modify SSD power sequenceEric Lai
Due to we turn off SSD power in S5. CB:32952 Based on M2 spec we have to turn on SSD power before RST assert. BUG=b:133389422 TEST=verify warm boot and cold boot are boot successfully. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I5b78bab4be675bbb8795361bcfa5af52cb54bb1e Reviewed-on: https://review.coreboot.org/c/coreboot/+/33029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-05-28mb/google/sarien: Fix SSD power leakage in S5Eric Lai
Turn off SSD power in S5. BUG=b:133389422 TEST=measure H13 is low in S5 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I40b5381cac33b0eac962a7730ee5c57e60e6d375 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-05-28src/arch/x86: Add automatic type41 entry creationChristian Walter
SMBIOS Type41 Entries will be automatically created. Type 41 entries define attributes of the onboard devices. Change-Id: Idcb3532a5c05666d6613af4f303df85f4f1f6e97 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32910 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-28src/cpu/x86/lapic/lapic.c: Add missing newlineChristian Walter
Added missing new line to Info Output. Change-Id: Ic4cd63f231de918fad7cd34724651bf8eb1c8e62 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-05-28src/include/device/pci_ids.h: Add Kabylake C236 DeviceChristian Walter
Change-Id: Ib11981543575311a32896df385d44cf30aa9387f Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32964 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-28mb/google/sarien: Modify arcada touchscreen reset delayCasper Chang
Modify reset delay to 20ms of touchscreen to address i2c hid driver rebind failed issue after auto update of touchscreen firmware BUG=b:132211627 TEST=Touchscreen works after auto update and no re-bind driver failed issue Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: If17afbd160a2c97beb69d0cb50e4a7dc654775f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Crews <ncrews@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-05-27sb/intel/common/smi.c: Remove unused functionsArthur Heymans
Since all targets using sb/intel/common and cpu/intel/smm/gen1 are now using PARALLEL_MP, some code is not used anymore. Change-Id: Ibdc2bb0f1412366b945813efbc1b6451d27f376f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30019 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-27cpu/intel/model_2065x: Put stage cache in TSEGArthur Heymans
TSEG is not accessible in ring 0 after it is locked in ramstage, in contrast with cbmem which remains accessible. Assuming SMM does not touch the cache this is a good region to cache stages. Change-Id: I89cbfb6ece62f554ac676fe686115e841d2c1e40 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/26298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-27cpu/intel/model_2065x: Use parallel MP initArthur Heymans
TESTED on Thinkpad X201 with a i7 CPU M620 CPU (hyperthread dual core). Boots ~28ms faster. Change-Id: I56b352f9d76ee58f5c82cd431a4e0fa206f848a0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/26297 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-27sb/intel/ibexpeak: Use common Intel SMM codeArthur Heymans
TODO in followup patch: Some not mainboard specific things should be moved out of mainboard_smi_apmc. Change-Id: Ifc2d8f7755ace598e66b162d071d472093e4656e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/26296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-27src/drivers/intel/fsp1_0: Move PLATFORM_USES_FSP1_0Arthur Heymans
drivers/intel/fsp1_0/Kconfig is a better location than cpu/x86/Kconfig. Change-Id: Ic1c86c26a66c33760484bb6a86e9763c148a7c96 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-05-27drivers/intel/fsp1.1: Remove unused functionArthur Heymans
This function is unused since POSTCAR_STAGE is used. (be291e8 soc/intel/fsp1.1: Implement postcar stage) Change-Id: Ia9ff5236295a0e1c4f7634d27cf0ae1d87029678 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-05-27drivers/intel/fsp1.1: Remove stale comment on bootflowArthur Heymans
This list is incorrect and not up to date. The FSP1.1 romstage bootflow is unnecessarily clumsy and instead of trying to update this comment effort is better spend making the bootflow more streamlined. Change-Id: If1e4c462acd0748f072f33e6397a7b43f3bfc834 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-05-25nb/intel/pineview: Use MTRR as a proxy for proper resetArthur Heymans
On reset this platform can sometimes hang. This also fixes pineview mainboards not building due to the symbol 'check_mtrr' lacking. Change-Id: I61fe77113004ea664522bda549240a33e3742a98 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-05-25superio/fintek/f71863fg: Remove variable set but not usedElyes HAOUAS
Change-Id: I993055d237b2bd607822485d34d5508c74a7744c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-05-25nb/intel/pineview: Move to C_ENVIRONMENT_BOOTBLOCKArthur Heymans
This adds a file i82801gx/bootblock_gcc.c since other targets that don't yet C_ENVIRONMENT_BOOTBLOCK still use the romcc compiled bootblock.c. Tested on Foxconn D41S. Change-Id: I7e74838b0d5e9c192082084cfd9821996f0e4c50 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-25mb/lenovo: Unify thermal threshold handlingPeter Lemenkov
Unify thermal handling across Lenovo boards (except g505, which is different). Namely, do the following: * Move thermal levels from acpi_tables to thermal.h (and create if necessary). * Don't use board-specific ifdef guards. * Set thermal levels using dedicated acpi_update_thermal_table function as almost all Lenovo boards do. * Update list of authors in comments. Merge all author's entries. * Minor whitespace and formatting. This makes diff -ruw between the Lenovo boards smaller. Change-Id: If569f67c932b7fbf14893b890a5588df4994daeb Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29659 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-25AGESA binaryPI: Add AGESA entry timestampsKyösti Mälkki
The call to timestamp_rescale_table() had to be moved before TS_AGESA_INIT_{POST/RESUME}_DONE to have that timestamp appear without rescaling. Change-Id: I71e09d3bc4c8657979d447b90fb6ac7cae959479 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-25AGESA binaryPI: Redo entrypoints namelistKyösti Mälkki
Stop assuming the list is complete with no gaps, and use a lookup-table to match AGESA_STRUCT_NAME types of the entrypoints we use with names. Change-Id: Ibef4690d8aa76ff5b47c879f5ceb9d8fc4c4c4cd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-05-25AGESA: Move debug helper to eventlog fileKyösti Mälkki
Change-Id: I2d74f934936e250886526b9c8482f500628a1158 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31513 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-25AGESA f12 f14 vendorcode: Clean up extra CFLAGSKyösti Mälkki
Extra variable is no longer required here. Change-Id: I2a6839ee0349e3019de3b2a91f9e7bb1c435603d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31512 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-05-25AGESA: Move heap_status_name() implementationKyösti Mälkki
Place it within class libagesa to avoid including AGESA internal header heapManager.h in coreboot proper build CPPFLAGS. Change-Id: Iae86d6631d7a6ba6ea2588a53b292b435dfd7861 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31511 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-24ec/google/wilco: Fix radio control commandDuncan Laurie
This command is working as written, but it is not actually correct as to what the format of the command should be. Fix this and add define the other radios. There is no change in the command send to the EC. Change-Id: Ia551b08561b673d27bec2f900d97b746699b30c4 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32973 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-05-24nb/amd/amdmct/mct/mctdqs_d.c: Remove variable set but not usedElyes HAOUAS
Change-Id: I45f32ea1ebf59a20d475dfad2d9d0980dec6918b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-05-24nb/northbridge/intel/x4x/acpi.c: Remove variable set but not usedElyes HAOUAS
Change-Id: I715adbe3d90d0f5195b54c274fb7843945d3e6be Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-05-24nb/amd/amdmct/mct/mctpro_d.c: Remove variable set but not usedElyes HAOUAS
Change-Id: Ic2f2788142329e2e4d04b531805a32d4dcaa293c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32949 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-24nb/amd/amdmct/mct/mctecc_d.c: Remove variable set but not usedElyes HAOUAS
Change-Id: I309cf83a1fec16b796c72c1803d27e1b7932940f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-05-24nb/amd/pi/00660F01: Remove variable set but not usedElyes HAOUAS
Change-Id: I14c69b324de795ba6dead7932b3267887130a6df Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-05-24superio: Add ASpeed AST2400Frans Hendriks
Add support for ASpeed AST2400. This device uses write twice 0xA5 to enter config mode. BUG = N/A TEST = ASRock D1521D4U Change-Id: I58fce31f0a2483e61e9d31f38ab5a059b8cf4f83 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Signed-off-by: Felix Singer <migy@darmstadt.ccc.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/23135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-05-23soc/intel/skylake: Add PCI Id for Kabylake DTChristian Walter
Change-Id: I496b3a91f765d4fa137c32c9ee1e244803fc25d8 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32850 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23Renumber cbtable tag MMC_INFOPatrick Georgi
We got another tag in the meantime, so resolve the conflict. Change-Id: I64cb5e02a9bed3d8746b75e451c13a1598341ba1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32954 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23coreboot_tables: pass the early_mmc_wake_hw status to payloadBora Guvendik
Pass the return value from early_mmc_wake_hw() to the payload so that payload can skip sending CMD0 and resetting the card in case of success or in case of a failure in firmware, payload can recover by sending CMD0 and resetting the card. BUG=b:78106689 TEST=Boot to OS Change-Id: Ia4c57d05433c3966118c3642913d7017958cce55 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/25464 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23intel/common/block/scs: Add ability to send early CMD0, CMD1Bora Guvendik
In order to improve boot time with emmc, add ability to send CMD0 and CMD1 early in romstage. This way, by the time system boots to payload, we are ready to continue with emmc setup and we don't need to send CMD0 in payload again, and wait for card to reset and be ready. BUG=b:78106689 TESTS = Boot to OS Force early_mmc_wake_hw() to return error, recover in payload Force an error in payload, make sure system can recover/boot Change-Id: I3488b077bf5100a1e0f2c879fb1436105607d25e Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/25068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-23mb/google/hatch/variants: Fix DPTF sensor IDsEvan Green
There are indeed two temperature sensors hooked up to the EC, but they are indexed as 0 and 1, not 1 and 2. BUG=b:132999028 TEST=Boot hatch with hardened EC, observe no more index overflows Change-Id: Ia7f503bc1dc941635db52fce40f217bf34da6d2b Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-05-23AGESA binaryPI: Sync STRUCT_NAME definitionsKyösti Mälkki
While not implemented, copying the definitions from later AGESA/AMD.h to older helps us avoid lots of preprocessor directives. Change-Id: I34edc1ca23e9c063c4286273c53249ff0a953798 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31510 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23soc/intel/fsp_baytrail/romstage: Remove variable set but not usedElyes HAOUAS
Change-Id: Ic04cb7c51862bea4d01f853ee2c88cc03c414e35 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32899 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23soc/intel/fsp_broadwell_de/romstage: Remove variable set but not usedElyes HAOUAS
Change-Id: I3e304b9b19978c4100ef3486088d809c2a7fe1d7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32898 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23nb/intel/pineview/early_init.c: Remove variable set but not usedElyes HAOUAS
Change-Id: If9ca551794a52e47a3649b126c3f061a68c494e4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32897 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23nb/intel/x4x/early_init.c: Remove variable set but not usedElyes HAOUAS
Change-Id: I8d0ab8bdc506592ef1d731e557b2397481aed725 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32896 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23nb/intel/haswell: Remove variable set but not usedElyes HAOUAS
Change-Id: I4e7f74f67f03131fae205a93dae3d61eca9cc0c7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32895 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23soc/intel/denverton_ns: Remove variable set but not usedElyes HAOUAS
Change-Id: Ic04231525c1aaaf3afc8c11cddc409b1f5b46743 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32913 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Guckian Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23cpu/amd/quadcore: Remove variable set but not usedElyes HAOUAS
Change-Id: I73f35ea80976ab445c797c4800b1e2fd24d34fdf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32893 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23lib/bootblock: Sanitize CMOS after bootblock_*_early_init()Nico Huber
CMOS isn't used that early, but the chipset initialization may be required to access it. In one instance, Intel Apollo Lake, the sanitize_cmos() function seems to hang if called before bootblock_soc_early_init(). The missing step is fast_spi_early_init(). But even without, one might expect sanitize_cmos() to return eventually (it didn't within about 20min). Change-Id: I6e1a029e4be7e109be43a3dad944bd7e05ea1f02 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
2019-05-23device_tree: Use be32dec/be32enc where appropriateJulius Werner
This patch rewrites some of the device tree code to use the new be32dec/be32enc helpers where they can make the code cleaner. Change-Id: I437bbd6645a556ae9a0cfe6ea14638098e4c3606 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32860 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23fit: Add "board-skuX" (without -rev) to allowed compatible stringsJulius Werner
In some cases we may have boards that need to differentiate SKUs but don't really want to differentiate revisions (at least for some SKUs). Let's add a compatible string match that includes only the SKU but not the revision so that kernel DTSes don't have to specify every possible revision if they want to match this. This patch was adapted from depthcharge's http://crosreview.com/1512004 Change-Id: Ib88862424b350a213761f5662fe170a1f8fccc7f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32859 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23console: Move poor-man's atoi() into string.hJulius Werner
vtxprintf.c seems to have been written before string.h was as fleshed out as it is today -- this patch removes some custom implementation of stuff we now have globally. It also makes the skip_atoi() function globally available, because I need it somewhere else, and while we maybe don't want a huge fully-featured string parsing library in coreboot, being able to parse an integer is occasionally useful. Change-Id: Iecb2b970aecfc768540d2bf8b3023445f54853a4 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
2019-05-23commonlib/stdlib.h: Remove printf() from corebootJulius Werner
coreboot should not have a definition of printf() anywhere -- it's too easy to accidentally sneak it into code otherwise. Where that is needed in code shared with userspace utilities, we should instead use printk() and define a shim for that for the userspace side. Change-Id: Iaa459df7122c88beb56695eee7c252d90bbde861 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32857 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23endian.h: Add be32dec/be32enc family of functionsJulius Werner
Libpayload has a family of functions that can "encode" or "decode" an endian-specific integer onto a byte stream pointer. These allow writing more pretty code than a raw be32_to_cpu/cpu_to_be32 with pointer casts in many (de-)serialization scenarios, so let's add them to coreboot as well. Change-Id: I049c5665484da12b3cf977a529310b0bde177d2d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32856 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23src/mainboard/google: Adopt Mainboards to changed Type41 FuncChristian Walter
Required for automatic onboard device detection in the next patch. Change-Id: I3087de779faf8d006510c460b5372b22ae54b887 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32909 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23mb/asus/p8h61-m_pro: Add small fixesPatrick Rudolph
* Add VBT * Configure OnBoard NIC * Add documentation Change-Id: Iad739b4e1dacb41f5f63247150951df7013bbf0c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-05-22mb/google/sarien: Send post code to the ECDuncan Laurie
Use the mainboard post code hook to inform the wilco EC driver of the latest boot stage. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms TEST=Remove DIMM module, confirm diagnostic LED pattern for memory failure (2 amber, 4 white). Change-Id: If5bf69365d8be3bdbd433f305c85848206ded7b0 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32937 Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-22ec/google/wilco: set diagnostic LEDs on boot failureKeith Short
On Wilco devices, if any of the coreboot stages fails with a fatal error, set the diagnostic LEDs with the Wilco EC. The last saved post code is used to determine the error code sent to the EC. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms TEST=Remove DIMM module, confirm diagnostic LED pattern for memory failure (2 amber, 4 white). TEST=Forced a fatal error in both bootblock and verstage to confirm diagnostic LEDs during these stages. This works on cold-boots only. Bug b:132622888 tracks the mailbox failures on warm boots. Change-Id: If865ab8203f89e499130f4677fec166b40d80174 Signed-off-by: Keith Short <keithshort@chromium.org> Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-22post_code: add post code for video initialization failureKeith Short
Add a new post code POST_VIDEO_FAILURE used when the Intel FSP silicon initialization returns an error when graphics was also initialized. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: Ibc7f7defbed34038f445949010a37c8e368aae20 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-22post_code: add post code for hardware initialization failureKeith Short
Add a new post code POST_HW_INIT_FAILURE, used when coreboot fails to detect or initialize a required hardware component. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: I73820d24b3e1c269d9d446a78ef4f97e167e3552 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-22post_code: add post code for memory errorKeith Short
Add a new post code POST_RAM_FAILURE, used when the Intel FSP code fails to initialize RAM. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: Ibafefa0fc0b1c525f923929cc91731fbcc1e7533 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-22post_code: add post code for invalid vendor binaryKeith Short
Add a new post code POST_INVALID_VENDOR_BINARY, used when coreboot fails to locate or validate a vendor supplied binary. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: Ib1e359d4e8772c37922b1b779135e58c73bff6b4 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-05-22post_code: add post code for critical CBFS failuresKeith Short
Add a new post code POST_INVALID_CBFS, used when coreboot fails to locate or validate a resource that is stored in CBFS. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: If1c8b92889040f9acd6250f847db02626809a987 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-22post_code: add post code for failure to load next stageKeith Short
Add a new post code, POST_INVALID_ROM, used when coreboot fails to locate or validate a resource that is stored in ROM. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: Ie6de6590595d8fcdc57ad156237fffa03d5ead38 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-05-22post: during post_code, only call elog when enabledJett Rink
Now that we call post_code in other stages other than RAMSTAGE, we need to guard the elog calls with the appropriate condition in order to compile correctly. Change-Id: I766c276f28d46492fb05e0e3be71853e21f4e8e0 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-05-22mb/up/squared: Add mainboardFelix Singer
Works: - bootblock, romstage, ramstage - Serial console UART0, UART1 - SPI flash console - iGPU init with libgfxinit - LAN1, LAN2 - USB2, USB3 - HDMI, DisplayPort - eMMC - flashing with flashrom externally WIP: - Documentation - VGA For some reason Seabios can not find the CBFS region and therefore it can't load seavgabios, but generally it is working as soon as Linux is booted. - ACPI Works not: - Devices needs proper configuration - Seabios can't find CBFS region Untested: - GPIO pin header - 60 pin EXHAT - Camera interface - MIPI-CSI2 2-lane (2MP) - MIPI-CSI2 4-lane (8MP) - SATA3 - USB3 OTG - embedded DisplayPort - M.2 slot - mini PCIe - flashing with flashrom internally using Linux Change-Id: Ia913534ec176fc600fcd4ce3af335ebe682b0ed4 Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-22soc/intel/cannonlake: Dump ME f/w version and status informationTim Wawrzynczak
At the end of device enable, print the ME f/w version number. Before resume or loading payload, dump the ME's Host Firmware Status registers. BUG=b:131437724 BRANCH=none TEST=Prints seemingly sane values on WHL and CML devices. Change-Id: Ibeb3a2a85cd84c9baa45f90f20a3dcf69f7d5646 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32527 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-22soc/amd/common: Identify AGESA call patternKyösti Mälkki
The entry to AGESA always follows pattern: amd_create_struct() amd_dispatch() amd_release_struct() Separate the create/release_struct calls from the more relevant entry point details. Change-Id: I1037c9daef3365c8672a198ac60f47fc79ffaea1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31488 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-22soc/fsp_baytrail: fix flashconsole on platformMatt DeVillier
Include spi.c in romstage. Since FSP 1.0 can't use NO_CAR_GLOBAL_MIGRATION, adjust global variables in spi.c to use CAR_GLOBAL. Adapted from early versions of CB:21107 Change-Id: I3487fb8ac317ce920bf1c3ef9d89590051932378 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-22soc/{baytrail/braswell/broadwell}: fix flashconsole on platformMatt DeVillier
Enabling flashconsole on these platforms fails to build due to spi.c not being compiled in prior to ramstage. Include in early stages (bootblock/romstage/postcar) as needed to enable flashconsole support. Early inclusion of monotonic_timer.c is needed for Broadwell as well. Change-Id: Idae0578ca92939246021bb85e34b0dcbd41df3b5 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-22vboot: determine display init before recovery checkEric Lai
Display is required by recovery mode. Determine display init before recovery check. BUG=b:133197727,b:133175864 TEST=enter recovery mode, checked the display shows up Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Id6ac611f51241373bca3e2b394a94dcd52d3fde7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-05-21soc/intel/fsp1.1: Implement postcar stageArthur Heymans
This moves FSP1.1 to use postcar stage to tear down CAR. On platforms with USE_GENERIC_FSP_CAR_INC the FSP header is found during the postcar stage so there is no need to push to save it in CAR global variables. On FSP1.1 platforms with an open source CAR implementation (Skylake, even though it still runs the FSP-T), the soc/intel/common/blocks/cpu/car/exit_car.S code tears down CAR. This also uses common functions to set up the MTRR to use after CAR is torn down. Test: build/boot on google/celes (BSW) and google/chell (SKL) Change-Id: I2330993842aae9c1365230f0c6bd8a2449dc73a5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30686 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-05-21soc/intel: Remove unused pointer argument in mca_configure()Subrata Banik
Change-Id: Iad3982d9db07a1f17ac39e87ff9c37956e40c258 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: David Guckian Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-05-21soc/intel/skylake: Remove redundant mca_configure() in ramstageSubrata Banik
This patch removes redundant mca_configure() function call from ramstage to clear machine check exception. First time it's getting called from soc_core_init() function inside cpu.c file. TEST=Build and boot SKL/KBL/AML platform without any machine-check exception. Change-Id: I7e54fd07816c6317588ab6db06365937c4300ccd Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2019-05-21mb/google/octopus: Create Garg variantKevin Chiu
This commit creates a garg variant for Octopus. The initial settings override the baseboard was copied from variant bobba. BUG=b:132668378 BRANCH=master TEST=emerge-octopus coreboot Change-Id: I9a36bc5dc3d2b891b1bce86015aa264894d1434b Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-05-21src/arch/arm64: Remove variable set but not usedElyes HAOUAS
Change-Id: I4fe5771dd1ebf3d2a981dab08e98f1c018d14133 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-21mb/google/kohaku: Set ACPI_GPIO_IRQ_EDGE_BOTH for headset INTKane Chen
Currently, GPP_H0 gpio input rout is set to GPI_INT. So, ACPI_GPIO_IRQ is required for GPP_H0 in devicetree This change also aligns hatch's setting. BUG=b:131742713 TEST=headset is working Change-Id: Ie1264641bc4dfa5f98b6dab2d6f2133a6f9cbdb8 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ben Kao <ben.kao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-05-21binaryPI/00670F000: Remove AGESA.c fileKyösti Mälkki
Change-Id: Id48de8b2f6feb6c29d745140c872215faa32eb37 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31487 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-21soc/amd/common: Refactor AmdCreateStruct() useKyösti Mälkki
AmdCreateStruct() and AmdReleaseStruct() are equally bad when it comes to lack of correct function declarations for definitions found in vendorcode binaryPI/AGESA.c. Replace these with calls that go through the common module_dispatch() functions. Change-Id: I611bcbe2a71fb65c8eb759a9dc74cbd9cb74136e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31486 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-21mb/lenovo/r500: Add mainboardArthur Heymans
Tested: - Ethernet NIC - Wifi RFKill - USB - LVDS, VGA with libgfxinit - Booting with dock attached (COM1) - Keyboard, trackpoint - SeaBIOS 1.12 - S3 resume - Tested in descriptor mode, with vendor FD and ME - Add VBT to ACPI OPregion Untested: - SATA (likely works) - Trackpad (my cable is broken, likely works) - Displayport (likely works) - Descriptorless mode - DVD drive - Extra battery - model with ATI GPU Does not work: - Dock hotplug - Quad core CPU (hangs during AP init, probably needs hardware mod) - Hotplugging the expresscard slot (works with 'echo 1 | sudo tee /sys/bus/pci/rescan') TODO: - proper dock support - documentation note: This board was hard to flash, I had to desolder the flash. TESTED: on a R500 with an Intel iGPU, SeaBIOS 1.12, Debian 9, Linux 4.9 from USB Change-Id: I9e129b2e916acdf2b8534fa9d8d2cfc8f64f5815 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/28644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-21mb/lenovo/t400: Add VBT fileArthur Heymans
All variants (t400, r400, t500, w500) use the same OPROM for the IGD. Change-Id: I1b9db7b29b22809542f80f60a5e2eb3283fe1c02 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-21src/drivers/intel/fsp2_0: Fix logical 'and' of equal expressionsElyes HAOUAS
Probably a copy/paste issue. Change-Id: I0334bc1f5d145df5af0a307cf8e7c23cc0605f76 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20soc/intel/cannonlake: Configure SPI CS parameters in FSP UPD.Tim Wawrzynczak
When FSP UPD parameters are configured, also configure the GSPI CS lines appropriately. GSPI driver assumes CS0 is the CS signal to use. BUG=b:130329260 BRANCH=None TEST=Boot Kohaku, TPM communcation still functional. Change-Id: Ic816395b7d198a52c704e6cabcb56889150b741c Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32791 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-20src/vendorcode/amd/agesa/f15tn: Update microcode to version 0x600111F 2018-03-05Mike Banon
This microcode update for CPU IDs 0x610F01/0x610F31 improves system stability: in particular, fixes Xen hardware virtualization freezes. Also it attempts to patch some Spectre-related security vulnerabilities. This new microcode has been tested by multiple coreboot community members and found working perfectly. Old version: 0x600110F [2012-01-11] replaced by New version: 0x600111F [2018-03-05] Change-Id: Ied5da0ff85abb63c2db2eeafd051b8e00916d961 Signed-off-by: Mike Banon <mikebdp2@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/28273 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: <awokd@danwin1210.me> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-20src/vendorcode/amd/agesa/f16kb: Update microcode to version 0x7000110 2018-02-09Mike Banon
This microcode update for CPU ID 0x700F01 improves system stability: in particular, fixes Xen hardware virtualization freezes. Also it attempts to patch some Spectre-related security vulnerabilities. This new microcode has been tested by multiple coreboot community members and found working perfectly. Old version: 0x700010B [2013-07-09] replaced by New version: 0x7000110 [2018-02-09] Change-Id: Iebe6e54d922378a8a1feb97f37b08ac50c8234b2 Signed-off-by: Mike Banon <mikebdp2@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/28370 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-20mb/google/{arcada, hatch, sarien}: Override FSP default GPIO PM configurationSubrata Banik
sarien/arcada: GPIO_COMM_0/2/3/4: Enable gpio community all PM configuration GPIO_COMM_1: Disable RCOMP clock gating due to GPP_D18 IRQ mapped for H1 TPM. hatch: GPIO_COMM_0/1/2/3: Enable gpio community all PM configuration GPIO_COMM_4: Disable RCOMP clock gating due to GPP_C21 IRQ mapped for H1 TPM. BUG=b:130764684 TEST=H1 TPM interrupt working find and able to boot from fixed boot media Change-Id: Ia4d5483847a4d243b9038119d4bb5990591cc754 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20mb/google/dragonegg: Override FSP default GPIO PM configurationSubrata Banik
GPIO_COMM_0/2/3/4: Enable gpio community all PM configuration. GPIO_COMM_1: Disable RCOMP clock gating due to GPP_D16 IRQ mapped for H1 TPM. BUG=b:130764684 TEST=H1 TPM interrupt working find and able to boot from fixed boot media Change-Id: I1f83f938f201c6574367960b1027555767cf6f3d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20soc/intel/cannonlake: Make use of gpio_pm_configure()Subrata Banik
Provide option in chip.h to set dynamic local clock gating setting. BUG=b:130764684 TEST=Able to build and boot CML. Change-Id: Iec60076398b745e11d5025e4d7a5c35374d918a4 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20soc/intel/icelake: Make use of gpio_pm_configure()Subrata Banik
Provide option in chip.h to set dynamic local clock gating setting. BUG=b:130764684 TEST=Able to build and boot ICL. Change-Id: Ic30a490aadb8cc9c05a19a05533ab0196c69b7f1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20soc/intel/common/block/gpio: Add gpio_pm_configure() functionSubrata Banik
This patch adds new function to perform gpio power management programming as per EDS. BUG=b:130764684 TEST=Able to build and boot from fixed media on ICL and CML. Change-Id: I816a70ad92595f013740a235a9799912ad51665e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20ec/google/wilco: Add support for KB_ERR_CODE to Wilco ECKeith Short
Adds support for the KB_ERR_CODE command on the Wilco EC. This command is used to drive diagnostic LEDs on the platform after a failed boot. This change also adds the Wilco EC mailbox command support to bootblock and verstage so that those stages can use the KB_ERR_CODE command. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: I96d17baf57694e4e01c676d80c606f67054cd0c3 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32776 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-20i945: Add device identification D2:F1Elyes HAOUAS
Add device identification D2:F1 for desktop version. (see Intel 945G/945GZ/945GC/945P/945PL Express Chipset Family datasheet page 192) Change-Id: Ie060644d635a7031ee6f55420d63751192481091 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-20console: Add new function die_with_post_code()Keith Short
Add a new helper function die_with_post_code() that generates a post code and an error string prior to halting the CPU. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: I87551d60b253dc13ff76f7898c1f112f573a00a2 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32838 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-20sb/amd/cimx/sb800: Get rid of power button device in corebootPaul Menzel
Apply commit d7b88dcb (mb/google/x86-boards: Get rid of power button device in coreboot) to AMD Brazos boards [1]: > As per the ACPI specification, there are two types of power button > devices: > 1. Fixed hardware power button > 2. Generic hardware power button > > Fixed hardware power button is added by the OSPM if POWER_BUTTON flag > is not set in FADT by the BIOS. This device has its programming model > in PM1x_EVT_BLK. All ACPI compliant OSes are expected to add this > power button device by default if the power button FADT flag is not > set. > > On the other hand, generic hardware power button can be used by > platforms if fixed register space cannot be used for the power button > device. In order to support this, power button device object with HID > PNP0C0C is expected to be added to ACPI tables. Additionally, > POWER_BUTTON flag should be set to indicate the presence of control > method for power button. [..] > This change gets rid of the generic hardware power button from all > google mainboards and relies completely on the fixed hardware power > button. The same problem exists with the AMD Hudson devices in coreboot. For AMD Hudson (2) and Yangtze based devices this was removed in commit 44f2fab8 (AMD hudson and yangtze boards: Let mainboard declare power button) [2]. Two devices are detected. $ dmesg | grep Button [ 0.209213] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.209254] ACPI: Power Button [PWRB] [ 0.209332] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.209349] ACPI: Power Button [PWRF] $ sudo evtest No device specified, trying to scan all of /dev/input/event* Available devices: /dev/input/event0: Power Button /dev/input/event1: Power Button [..] [1]: https://review.coreboot.org/5546 [2]: https://review.coreboot.org/27272 Change-Id: I0cbecb72f7e1bf3d051d3b7656c6af4d6f43b497 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/27496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-05-20mb/google/hatch: Change SD_CD# reset config to PLTRSTKrishna Prasad Bhat
The system should boot fine to OS on pressing power button before the system enters G3. However, on hatch, we observe that the system waits for few seconds at "Starting kernel" and then resets, with SD card tray inserted and SD_CD# pad reset config set to DEEP. Hence configuring SD_CD# pad reset config to PLTRST. BUG=b:129933011 TEST=Built and verified on hatch. Change-Id: Ic4466b96332f095ff39b28d98607e95fc3d12d6a Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20soc/intel/braswell/pmutil.c: Use GEN_PMCON1 for RTC statusFrans Hendriks
cbmem_find is not available in every stage. Remove usage of cbmem_find() and use GEN_PMCON1 always. BUG=NA TEST=Booting Embedded Linux on Facebook FBG-1701 Change-Id: Id97d57864b3e241e8f046d9b1caebdce199a46b1 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>