summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2017-12-07intel/bd82x6x: Add missing IRQs in ACPI PIRQ link devicesTobias Diedrich
pch_pirq_init() sets all PIRQ links to route to irq 11. However in the ACPI data, on half the links irq 11 is missing. The other half is missing irq 10. This fixes a mostly cosmetic issue in the Linux messages: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) Change-Id: I002147d702cacf54a233196932b30732f6a433b3 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/22600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-12-07mainboard/intel/glkrvp: Ignore Audio DMIC IOSSTATESathyanarayana Nujella
Audio DMIC_CLK needs to be ON in S0ix to support Wake on Voice. So, configuring GPIO_171 to be as IGNORE IOSSTATE, so that clock is ON in S0ix state. BUG=None TEST=put DUT in S0ix, verified DMIC_CLK in scope when wov capture path is ON Change-Id: I147cf3c12acb11429c6cb234e8c511f57886b6b4 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/22675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-07Revert "soc/intel/skylake: Clean up SoC ASL code."Matt DeVillier
This partially reverts commit a7b97510aeb1652fd0006c9b2d10df6568f37e2e. For the internal eMMC to be used by Windows for installation, the CARD device and _RMV methods are required. Without them, Windows does not see/show the eMMC as a valid installation target. TEST: boot google/chell with Tianocore payload and install Windows 10 to the internal eMMC drive. Change-Id: I04819ff16ab4cb0d2ea6e1c7f47179f5dacb7cfd Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22684 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-07amd/stoneyridge: Create new name/IRQ associationRichard Spiegel
Table intr_types[] is hard to maintain, and has unused spaces filled with NULL. A new table format is needed that creates strong association between the APIC register index and the associated IRQ name, is easy to maintain and has no unused space (index) to indicate that a particular register is unused while still indicating which registers are valid. Also, the string that defines the name of associated IRQ should be declared with "#define" in a header, but must be physically initiated in a source file. The "#define" must make a strong association between the used register index and the associated IRQ name. Example: #define INDEX_0X16_NAME "PerMon\t" BUG=b:69868534 TEST=Check serial output against BKDG for AMD Family 15h Models 70h-7Fh Processors definitions for Pci_Intr_Index. Also, check for new output format to confirm write_pci_int_table() is working as desired. There's no test for write_pci_cfg_irqs, as it's not being used by kahlee. Change-Id: I2dde4d016cc3228e50dcfadd2d3586a3609e608d Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-07security/vboot: Remove unused include of vboot_nvstorage.hRandall Spangler
This include is not needed, and the header file is going away in vboot_reference. So, remove it. BUG=chromium:789276 BRANCH=none TEST=emerge-reef coreboot Change-Id: Ie0b37ae3d2f979f79060a15ca3f7157f49c89785 Signed-off-by: Randall Spangler <rspangler@chromium.org> Signed-off-by: Randall Spangler <randall@spanglers.com> Reviewed-on: https://review.coreboot.org/22733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-07google/gru: Add SKU ID for ScarletJulius Werner
Scarlet has SKU detection strapping pins now. This patch adds the code to read them. BUG=b:69373077 Change-Id: I8d889a845950923bc7b5be9b79792cf3c8b6b8ad Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22697 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-07rockchip/rk3399: Select GENERIC_GPIO_LIB KconfigJulius Werner
This option should've been selected by RK3399 the whole time since the SoC supports the <soc/gpio.h> interface. It wasn't really a big deal until now where I'm trying to use a the base2 read helper, though. Change-Id: Ib7a5f00a6680163105fc0598ce77d03f3645f05a Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22744 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-07boardid: Add helpers to read sku_id strapping into coreboot tablesJulius Werner
On many recent Chrome OS boards, the desire to unite more configurations under the same image has led to the need of a "SKU ID" that identifies different configurations of the same board (e.g. with certain optional components stuffed or not stuffed, or replaced with a comparable component). This is markedly different from the existing "board ID", because that is reserved to count "revisions" -- changes made to the same configuration over time during the development process. This patch adds support to have a mainboard define this SKU ID and pass it through the coreboot table like we already have for board IDs. Change-Id: I8aabffe8e1003b0d6fb70d689ae513ca4b46aeda Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22696 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-07boardid: Switch from Kconfig to weak functionsJulius Werner
This patch switches the board_id and ram_code helper framework to use weak functions rather than Kconfigs to determine whether the board supplies these IDs. This cuts down on the amount of boilerplate Kconfigs many boards have to set and also gives them more flexibility, such as being able to determine at runtime whether a given ID is present. Change-Id: I97d6d1103ebb2a2a7cf1ecfc45709c7e8c1a5cb0 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22695 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-07boardid: Minor clean up and standardizationJulius Werner
Merge the different coreboot table strapping ID structures into one because they're really just all the same, and I want to add more. Make the signature of the board_id() function return a uint32_t because that's also what goes in the coreboot table. Add a printk to the generic code handling strapping IDs in ramstage so that not every individual mainboard implementation needs its own print. (In turn, remove one such print from fsp1_1 code because it's in the way of my next patch.) Change-Id: Ib9563edf07b623a586a4dc168fe357564c5e68b5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-06Kconfig: Remove BOARD_ID_MANUAL optionJulius Werner
The BOARD_ID_MANUAL and BOARD_ID_STRING options were introduced for the Urara board which is now long dead, and have never been used anywhere else. They were trying to do something that we usually handle with a separate SKU ID these days, whereas BOARD_ID is supposed to be reserved for different revisions of the same board/SKU. Get rid of it to make further refactoring of other options easier. Also shove some stuff back into the Urara mainboard that should've never crept into generic headers. Change-Id: I4e7018066eadb38bced96d8eca2ffd4f0dd17110 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22694 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-06mb/*/*/Kconfig: Remove default MMCONF_BASE_ADDRESS on Sandy BridgeArthur Heymans
Change-Id: I6f0d6d7fefc77fb05cdb629d09de8cb72496a9cc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-12-06mb/google/poppy: Remove variant_cros_gpios from variantsFurquan Shaikh
Variants nautilus and soraka currently provide the exact same definition for variant_cros_gpios as provided by the baseboard. This change removes the function defintions from variants so that the weak definition in baseboard can be used. Change-Id: Ic88623f34039792f0f9fb46842b24e4f1290981b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22705 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-06mb/google/poppy: Add config option for camera ACPI supportFurquan Shaikh
This change adds a new config option VARIANT_HAS_CAMERA_ACPI to allow variants to define ACPI tables for camera support. It also prevents boards that do not need this from unnecessarily providing dummy files for camera ACPI support. Change-Id: I91f8e407e0f021071eeadbde8c2695e2a6d69e06 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-06mb/google/poppy: Change POPPY_USE_* to VARIANT_HAS_*Furquan Shaikh
Change the prefix for TPM options from POPPY_USE_* to VARIANT_HAS_*. This makes it clear that these are variant specific options. Change-Id: I6fd120a34a5b0c1f018164d5c2b60548da1d0f61 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-06mb/google/poppy: Introduce VARIANT_SPECIFIC_OPTIONS_*Furquan Shaikh
In order to allow variants to select different Kconfig options, this change adds VARIANT_SPECIFIC_OPTIONS_${VARIANT_NAME} which can be selected by each variant in Kcnonfig.name. Change-Id: I15db2fdac5c9e55f9698c8a0c083d6467afae245 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-06mb/google/poppy: Remove dynamic disabling of TPMFurquan Shaikh
This change removes the dynamic disabling of TPM based on config options. Poppy and its variants will have only one type of TPM supported and so there is no need to update it dynamically. Change-Id: Ie82825fcf7092e845583edaac9ba0d3fc9d1dd80 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22704 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-06mb/google/poppy/variants/soraka: Disable SPI TPMFurquan Shaikh
Soraka is no longer using SPI TPM. This change disables GSPI0 in device tree and updates gpio config accordingly. Change-Id: Ia0554ce3a0d553631123cc2b23b6dc2f6f40a1a3 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-06mb/google/poppy: Disable SPI TPMFurquan Shaikh
Mainboard poppy is no longer using SPI TPM. This change disables GSPI0 in device tree and udpates gpio configuration accordingly. Change-Id: I713e41c45e323bf13aa79412ec679c90121a52b2 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-06google/kahlee: Set USB OC pinsMarc Jones
Set the USB over current pins for the Grunt baseboard and Kahlee mainboard. Removes the ACPI ASL OC code, which is not used on Stoney Ridge SOC. BUG=b:69229635 TEST=Build and boot Kahlee. Not tested with OC test fixture. Change-Id: I5a9b3409d9c91b89fd02f8eecf9e04c435f14342 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-12-06soc/amd/stoneyridge: Add USB OC supportMarc Jones
Add USB overcurrent support. Adds a weak call for mainboards that don't suport USB OC. BUG=b:69229635 Change-Id: Ie54c7a2baa78f21cf1cd30d5ed70c8c832cf3674 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-12-06soc/amd/stoneyridge: Add XHCI PM register access functionsMarc Jones
Add functions to access the XHCI PM MMIO registers. Change-Id: I81b4c0a448eb17c5ee0562a2c3548a074d533a98 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-12-05google/gru: update RAMID tableLin Huang
There is some confusion with old RAMID table, make it clear, and let's no longer tangle it in future. Change-Id: I44215b4a6668074575a5df691ac1ff8fa3d15492 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-12-05soc/intel/cannonlake: Fix DSX_CFG macro name for AC_PRESENTFurquan Shaikh
DSX_CFG provides a config option to disable internal pull-down on AC_PRESENT. This change updates macro name to reflect this correctly. Change-Id: I620d7da4048178f86de41f3afd98543cf8efc5ce Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-05mb/google/poppy,nautilus,soraka: Disable PD on AC_PRESENT in deep SxFurquan Shaikh
This change updates device tree deep_sx_config to disable internal pull-down on AC_PRESENT. BUG=b:69983729 Change-Id: I041900a5262f8fd920856f126185329242a0639a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-05soc/intel/skylake: Fix DSX_CFG macro name for AC_PRESENTFurquan Shaikh
DSX_CFG provides a config option to disable internal pull-down on AC_PRESENT. This change updates macro name to reflect this correctly. BUG=b:69983729 Change-Id: I291112858c4ce36667edf30fe303fed437baf5d2 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-05mb/hp/8460p: Add TPM supportBill XIE
After applying this change, /dev/tpm0 is visible inside GNU/Linux with kernel 4.9.51-1 from Debian, and there is a menu item shown inside SeaBIOS' (master only) interface if ESC is pressed. The TPM is confirmed working with [Heads](https://github.com/osresearch/heads). Change-Id: I3b845928954d203d1c3608b6704fedbd590e1fa9 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/22602 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-04security/vboot: Guard google_chromeec_reboot by if clauseDaisuke Nojiri
794d222886 "cr50_enable_update: Add printk before EC hibernate" inserted printk and kicked out google_chromeec_reboot from the if-clause. This patch fixes it. BUG=none BRANCH=none TEST=none Change-Id: I058e929e2acd883d2265b2ab019743e3849cb3af Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/22668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-04amd/stoneyridge: Transfer functions from early_setup.c to southbridge.cRichard Spiegel
In preparation to deleting early_setup,c, transfer all functions except those related to wide IO to southbridge.c. BUG=b:64033893 TEST=Build and boot to OS. Change-Id: Ibe1d87cb3e0eb3e8ed4d2dc2adbddf2e13557c9e Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-04mb/google/fizz: Enable Wake-on-Lan featureGaggery Tsai
This patch enables WOL feature. BUG=b:69290148 BRANCH=None TEST=powerd_dbus_suspend && sudo etherwake -i eth0 $MAC to make sure the system could be woken up by WOL packet. Change-Id: I1178a776db2cdb448fe6650d49ae6c0281ac1128 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/22606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-03ec/lenovo/h8/acpi: Fix regression (MS Windows crash on boot)Patrick Rudolph
Fix a regression introduced by #21227 0709dc04 (ec/lenovo/h8/acpi/thermal: Add ACPI fan control). The commit caused Windows to crash as EC reads aren't allowed in the fan device or it's powerresource's methods. Implement the same approach as all other platforms using a GNVS variable named FLVL instead of reading from EC. In addition to EC reads writing to FIELD elements, in another ACPI scope, seems to be broken. Introduce a new method to set the fan disengage mode. Tested on Windows 7 and Lenovo T500. Change-Id: Ia99f8814ac14194578dcd1aa50a63e3f35c042dd Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/22514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-12-03sb/intel: Replace DTS2 with FLVLPatrick Rudolph
Replace the unused DTS2 field with FLVL (fan level). Required to use the fan level on all thinkpads to store and retrieve the current fan level. Possible additional use case is to modify the fan level from a SMI handler. Change-Id: I1ee5348d24b018ab1b61067813c1db63d6706c12 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/22513 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-12-02google/reef: Fix whitespace inconsistency in coral codePatrick Georgi
BUG=none BRANCH=none TEST=none Change-Id: I4e61f1327027c5100773e2b837f439a939807e72 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/22662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-02google/reef: add more USB tuning for coral variantsPatrick Georgi
Lava numbers are in. BUG=b:69990330 BRANCH=none TEST=verified that USB signal is within spec Change-Id: I7416ec8d058271700ebe43f8d92af61c6c0d6b42 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/22661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quantatw.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-02winbond/w83977tf: Add ACPI declarationsKeith Hui
Add ACPI declarations to be incorporated into ACPI tables for mainboards with this super I/O. Change-Id: If113807901619bc0f4250607546be415f9e5e45b Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/21670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-02soc/intel/apollolake: Add PNP configDivya Chellap
1. Programs PNP values for AUNIT, BUNIT & TUNIT registers as per reference code. 2. A new configuration option pnp_settings is introduced in devicetree.cb to select PNP settings among performance, power, power & performance. TEST = built and booted glkrvp, verfied that the callback gets control, verified warm and cold reboots. Change-Id: Ibd70a42c9406941c8a93cc972f22c2475e9d0200 Signed-off-by: Divya Chellap <divya.chellappa@intel.com> Reviewed-on: https://review.coreboot.org/22488 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-02arch/riscv: Remove supervisor_trap_entryJonathan Neuschäfer
coreboot only maintains a single trap entry, because it only runs in machine mode. Change-Id: I7324d9c8897d5c4e9d4784e7bc2a055890eab698 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-12-02riscv: Remove config string supportJonathan Neuschäfer
The code dealing with the old config string isn't needed anymore, because the config string has been deprecated in favor of OpenFirmware-derived devicetrees. Change-Id: I71398fb4861dbaf7eefc6e6f222bb7159798fafa Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-12-02arch/riscv: Remove the current SBI implementationJonathan Neuschäfer
This Supervisor Binary Interface, which is based on a page of code that's provided to operating systems by the M-mode software, has been superseded by a different (currently not really documented) SBI, which is based on directly executing ECALLs instructions. Thus some of our code becomes obsolete. Just rip it out until we implement the new SBI. Change-Id: Iec9c20b750f39a2b8f1553e25865bbf150605a6d Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-12-02arch/riscv: Return from trap_handler instead of jumping outJonathan Neuschäfer
Change-Id: I8dbed5dbe377d3a02e58a3bc16a1ee112b28bea9 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-12-02arch/riscv: Unify trap returnJonathan Neuschäfer
Change-Id: I9de0c92b3f925e8f4db00d7281222a07db68b2ae Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21763 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-12-02soc/intel/cannonlake: Initialize PMC controllerSubrata Banik
PMC controller gets hidden during FSP-Silicon initialization using sideband interface on CannonLake platform. Hence accessing PWRMBASE using PCI config space will return invalid BAR value as 0xFFFFF000. Also PMC PCI driver will not be able to initialize PMC controller as its not showing over PCI bus. coreboot PCI enumeration log shows: PCI: Static device PCI: 00:1f.2 not found, disabling it. This patch ensures PMC controller is getting initialized using boot state machine right after FSP Silicon Init returns (BS_DEV_INIT_CHIPS/ BS_ON_EXIT). TEST=Ensures PWRMBASE address is 0xFE000000 and PMC controller is getting initialized during BS_DEV_INIT_CHIPES/BS_ON_EXIT. Change-Id: Ife7389f0f035b66837aace89d6e6b866e494cbe4 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-02soc/intel/common/block: Add Intel common PMC controller support for KBL, APLSubrata Banik
SoC needs to select specific macros to compile commom PMC code. TEST=Build and boot KBL (soraka/eve), APL (reef) Change-Id: Iacc8da986c01e9ac7516643dafc6d932ebe0ee5e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-02mainboard/google/kahlee: Remove usb_oc.asl filesMartin Roth
These files aren't needed for the overcurrent functionality. BUG=b:69305596, b:69229635 TEST=Build Grunt & Kahlee. Overcurrent wasn't yet enabled so no other testing was needed. Change-Id: I8dcd50a249e387ccf1142949b359cee09942460a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-12-02mainboard/google/kahlee: Add Baseboard GPIOsMartin Roth
Add initial baseboard GPIOs based on grunt schematics. BUG=b:69305596 TEST=Build grunt Change-Id: I4efcee7dbf54fb9ea82e5e9394db805bb69203c8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-12-02soc/amd/stoneyridge: Add GPIO40 to GPIO listMartin Roth
GPIO40 is a valid GPIO for the Stoney FT4 package, so add it to the list of GPIOs. BUG=b:69305596 TEST=Build Kahlee & Grunt Change-Id: I20fce60ff1a61761b907518c0a6e1685a17f2886 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-12-02soc/amd/stoneyridge: Add RunOnAP supportMarc Jones
Add support for AGESA callbacks RunFcnOnAp() and RunFcnOnAllAp(). Update the wording on the AP errors. The functions are not missing, they are not supported. BUG= b:66690176 BRANCH=none TEST=Check serial output for the AP calls from AGESA. Change-Id: Id30cb2e0c6cc474158f3a7710dbb8ecf54f1ffe4 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-01mainboard/google/kahlee: Update Kconfig string used in makefilesMartin Roth
Update the variable ${CONFIG_VARIANT_DIR} to use parens instead. Either is valid, but since we use parentheses everywhere else, it's better to be consistent. BUG=b:69691210 TEST=Build grunt & kahlee Change-Id: Ieffabaae5516a893f1dc1f7195a17c4cdeae8853 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22656 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-01amd/stoneyridge: Update def_callouts.c to reset using reset.cMartin Roth
Convert functionality to use coreboot-centric functions and defined values. This change should have no functional effect. BUG=b:62241048 TEST=Build Gardenia; Build & boot Kahlee. Change-Id: I62ae50af05d3ac770560368245c4ae81cf9c4395 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-01soc/amd/stoney: clean up and update reset.cMartin Roth
- Move #defines to soc/northbridge.h, add other reset definitions to soc/southbridge.h. - Clean up file to use definitions instead of magic numbers. - Add do_soft_reset() BUG=b:69224851 TEST=Build gardenia; Build & boot Kahlee Change-Id: I0cc4c04b53b7fec38d45e962ff1292d8c717269c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22439 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-30nuvoton/nct5572d: Disable mouse controller also during resumePaul Menzel
Currently, having a keyboard connected to the PS/2 controller of the ASRock E350M1, after suspending and resuming the system, the keyboard does not work anymore. A similar problem is documented in commit 448e3863 (drivers/pc80: Add PS/2 mouse presence detect) [1]. There is no reason to not disable the controller during resume. Also, that way, the PS2 ASL method does not need to be overriden. [1] https://review.coreboot.org/13165 TEST=Resume system, and notice PS/2 keyboard works. Change-Id: I51dc446861120f80bc9ffc4cc54b86e317d99689 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/22287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-11-30superio: Log if mouse controller is disabledPaul Menzel
It’s useful to know, if the mouse controller is disabled or not, so convert the comment to a log message. Change-Id: Ic3f7d5b7b98cf8c258a6a601f4a44ce403f4a576 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/22285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-11-30vx900/chrome9hd: fix a trivial typoLubomir Rintel
Change-Id: Ibfe6a6dc63454deacfd12de6dad2d6a792474f55 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/22270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-11-30acpi/tpm: remove non-existent IRQ for Infineon TPM chipMatt DeVillier
The Infineon TPM chip used on these platforms doesn't use an IRQ line; the Linux kernel has been patched to work around this, but better to remove it completely. Test: boot linux on google/wolf,lulu,cyan without tpm_tis.interrupts=0 kernel parameter, observe no abnormal delays in boot or resume from S3. Change-Id: Id510c73cfdc14b7f82b0cc695691b55423185a0b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-11-30mb/google/poppy/variants/nautilus: Disable DPTFFurquan Shaikh
This change disables DPTF until the support is properly added in dptf.asl Change-Id: I68f2442e00718a4edbb34661d31d3a415d41c29f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-11-30amd/{hudson,stoneyridge}: fix out of bounds readRichard Spiegel
southbridge/amd/pi/hudson/imc.c procedure enable_imc_thermal_zone was identified by coverity as having out of bounds access. Copies of the procedure are present in southbridge/amd/agesa/hudson/imc.c and in soc/amd/stoneyridge/imc.c. Fix the procedure in all 3 files. Fixes coverity CID 1260807: Out-of-bounds read. BUG=b:69835834 TEST=Build and platform boot to OS Change-Id: Ic16edc607358b9a688151735e6fcb3393d3bce80 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-30mainboard/google/fizz: Disable DPTF active policyDavid Wu
Use EC to perform FAN control. BUG=b:67487721,b:69404739,b:64439568 BRANCH=master TEST=emerge-fizz coreboot and boot on fizz dut Change-Id: I3394d3af9cbdb3eab1f18254909f60e2704735c3 Signed-off-by: David Wu <david_wu@quantatw.com> Reviewed-on: https://review.coreboot.org/22481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: TH Lin <t.h_lin@quanta.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-11-30mainboard/compulab: add support for CompuLab Intense-PCHal Martin
Add coreboot support for CompuLab Intense-PC (Ivy Bridge) Modifications: - Memory SPDs have been fixed to detect both installed SODIMM modules - Full-height Mini-PCIe slot defaults to PCIe mode - mSATA can be chosen instead of mPCIe via Kconfig option ENABLE_MSATA Tested (Xubuntu 17.10/Linux 4.13 where applicable): - 2+2GB DDR3-1600 SODIMMs pass memtest - 4+4GB DDR3-1600 SODIMMs pass memtest - 4+8GB DDR3-1333 SODIMMs pass memtest - 8+8GB DDR3-1333 SODIMMs pass memtest - Booting via USB working (with no SATA HDD present) - Booting to main SATA HDD working - DisplayPort and HDMI output working for coreboot init (*requires* VGA BIOS) - DisplayPort and HDMI dual-head working in Linux - Mini-PCIe devices (half/full-height) detected in Linux - mSATA working (when chosen using ENABLE_MSATA) - Onboard Intel 82579 GbE working - Secondary Realtek 8111 GbE working - Rear eSATA ports working - Onboard analog audio output working - HDMI audio output working - USB 3.0 working - Suspend to RAM (S3) working, but not tested extensively - Mini PCIe WiFi - FACE module FM-4USB (4 USB 2.0 ports) Disabled/unsupported: - TPM (BTO option, not included in base config) - FACE modules: - FM-USB3 (USB 3.0/mSATA) NOT SUPPORTED/TESTED - FM-SER (serial) NOT SUPPORTED/TESTED - FM-XTDEU2/4 (LAN) NOT SUPPORTED/TESTED - FM-XTDE4U2/4 (Quad LAN) NOT SUPPORTED/TESTED - FM-XTDM2 (dual mPCIe) NOT SUPPORTED/TESTED - FM-VC (video capture) NOT SUPPORTED/TESTED - FM-POE (Quad LAN w/PoE) NOT SUPPORTED/TESTED Not tested: - RS-232 Product information: http://www.fit-pc.com/web/products/intense-pc/ Change-Id: I741b0b2f87eb9147c375b405a5b6989a10c7ad0a Signed-off-by: Hal Martin <hal.martin@gmail.com> Reviewed-on: https://review.coreboot.org/22210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-11-30acpi/tpm: update TPM preprocessor guardsMatt DeVillier
Replace '#ifdef ENABLE_TPM' with '#if IS_ENABLED(CONFIG_LPC_TPM)' for platforms which use a TPM on the LPC bus, so that the TPM ACPI code isn't included when the Kconfig option is deselected. Change-Id: Ia4c0d67dd3b044fe468002dff9eeb4f75f9934f9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-11-30intel: Replace msr(0x198) with msr(IA32_PERF_STATUS)Elyes HAOUAS
Change-Id: I22241427d1405de2e2eb2b3cfb029f3ce2c8dace Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/22585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-11-30mb/google/poppy/variants/soraka: Set PCH thermal trip point to 75 degreeCSubrata Banik
PMC logic shuts down the thermal sensor when CPU is in a C-state and DTS Temp <= Low Temp Threshold in case Dynamic Thermal Shutdown in S0ix is enabled. BUG=b:69110373 BRANCH=none TEST=Ensure Thermal Device(B0: D20: F2) TSPM offset 0x1c[LTT (8:0)] value is 0xFA. Change-Id: I6246300a4376a0194950d4de277af040b10b6c1f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-30soc/intel/skylake: Set low maximum temperature threshold for Thermal DeviceSubrata Banik
PMC logic shuts down the thermal sensor when CPU is in a C-state and DTS Temp <= Low Temp Threshold in case Dynamic Thermal Shutdown in S0ix is enabled. BUG=b:69110373 BRANCH=none TEST=Ensure Thermal Device(B0: D20: F2) TSPM offset 0x1c[LTT (8:0)] value is 0xFA. Change-Id: I94d09a28bf1ea07a53cfa04c54752358bafca610 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-30mb/google/nautilus: add synaptics touch screen supportChris Wang
Add synaptics touchscreen in the device tree so that the correct ACPI device is created. BUG=b:66462881 BRANCH=master TEST=compiled/verify the touchscreen works Change-Id: I6e89a5db0e9f8ae777eed661f3bf89d653a937e6 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-30soc/intel/{APL,GLK}: Use Intel SRAM common codeV Sowmya
TEST:Build and boot reef. Verified that SRAM common code is used to set the resources. Change-Id: If9f5d400df09b4a0aa4b464d7f1f24320696b0aa Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/22608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-30soc/intel/common: Add Intel SRAM common code supportV Sowmya
Add SRAM code support in intel/common/block to read and use fixed resources on BAR0 and BAR2 for SRAM. Change-Id: I7870a3ca09ac7b57eb551d5eb42d8361d22f362a Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/22607 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-30chromeec: Notify CREC device of wakeup eventsFurquan Shaikh
Whenever there is a new EC event that could be wake-capable, notify CREC device of this using notification value 0x2 i.e. device wake. This allows Linux kernel to track active_count value correctly for CREC device. BUG=b:69118395 BRANCH=None TEST=Verified on Soraka: 1. Put device into suspend 2. Wake up using mode change/lid open 3. Check that the active_count for GOOG0004 has increased (cat wakeup_sources | grep GOOG0004) Change-Id: I723f7f4e4c99e7a5b57c6296da66cf30cd413c27 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22625 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-29soc/amd/stoneyridge: Add mainboard call for SPD valuesMarc Jones
Add a mainboard function call to write the AGESA SPD buffer. Removes the unneccesary dimm_spd.c file. BUG=b:67845441 Change-Id: Id42622008b49b4559e648a7fa1bfd9f26e1f56a4 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-29google/kahlee: Add SPD functionMarc Jones
Add the mainboard_spd_read function in romstage and call the variants function. Grunt is the baseboard and has soldered down memory, so add it for the default weak SPD functions and build the SPDs in cbfs. Kahlee overrides the weak SPD function and falls back to the soc I2C SPD functions. BUG=b:67845441 TEST=Build and boot Kahlee. Change-Id: I789002bfadc1a2b24f9046708986d29c0e2daf33 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-29google/kahlee: Rename board_id to memory_skuMarc Jones
The GPIOs used in board_id are meant to indicate the memory configuration. Rename board_id to memory_skus. Report the board_id received from the EC. BUG=b:69649438 Change-Id: I84bacead3daf829c97f595c4c11a243953243c29 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22561 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-29mb/google/poppy/variants/nautilus: Disable camera devicesFurquan Shaikh
This change disables camera devices until camera support is properly added for nautilus. Change-Id: I7de37cbf9c32fa063f55a2e54986e33b66acfa3b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-29mb/google/poppy: Add variant support for camera aslFurquan Shaikh
This change adds infrastructure to allow variants to define their own camera.asl file. - Poppy and soraka use the one provided by baseboard. - Dummy file is added for nautilus since it does not have camera support enabled yet. TEST=Verified that DSDT table remains the same with and without this change. Change-Id: I0f0b489e74739aa4708283d58d8b7626b77a89a3 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: shkim <sh_.kim@samsung.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-28soc/intel/skylake: Make use of Intel common DSP blockSubrata Banik
TEST=Build and boot soraka/eve. Change-Id: I8be2a90dc4e4c5eb196af57045d2a46b7f0c9722 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-28google/scarlet: support kd097d04 panelLin Huang
Support kd097d04 dual mipi panel on Scarlet. Change-Id: Ie8bc0cbb79840f1924a8cc111f2511292203731f Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28google/gru: correct backlight gpioLin Huang
it uses backlight enable pin as backlight gpio currently, correct it and define the right backlight gpio. Change-Id: I7c5abfd5bbbae015b899f3edc8892ea32bf82463 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22529 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28rockchip/rk3399: support dual mipi dsiLin Huang
Refactor the mipi driver, so we can support dual mipi panel. And pass the panel data from mainboard.c, that we can support different panel with different board. Change-Id: Id1286c0ccbe50c89514c8daee66439116d3f1ca4 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28rockchip/rk3399: mipi: properly configure PHY timingLin Huang
These values are specified as constant time periods but the PHY configuration is in terms of the current lane byte clock so using constant values guarantees that the timings will be outside the specification with some display configurations. Derive the necessary configuration from the byte clock in order to ensure that the PHY configuration is correct. Change-Id: I396029956730907a33babe39c6a171f2fcea9dcd Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28rockchip/rk3399: improve mipi transfer flowLin Huang
check GEN_CMD_FULL status before transfer, check GEN_CMD_EMPTY and GEN_PLD_W_EMPTY status after transfer. Change-Id: I936c0d888b10f13141519f95ac7bcae3e15e95d9 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28rockchip/rk3399: mipi: correct Feedback divider settingLin Huang
This patch correct Feedback divider setting: 1. Due to the use of a "by 2 pre-scaler," the range of the feedback multiplication Feedback divider is limited to even division numbers, and Feedback divider must be greater than 12, less than 1000. 2. Make the previously configured Feedback divider(LSB) factors effective Change-Id: Ic7c5c59be1d00c65c3b17cb3c4bfba8d7459e960 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28rockchip/rk3399: mipi: correct phy parameter settingLin Huang
As MIPI PHY document show, icpctrl<3..0> and lpfctrl<5..0> should depend on frequency, so fix it. Change-Id: Ic4a90767bd1f22d5d784d4013dc7afb3149115c1 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28rockchip/rk3399: mipi: Fix LOOP_DIV_HIGH_SEL to be 4 bits wideLin Huang
Accroding to datasheet, feedback divider register high value is only 4 bit, it currently uses 5 bit, so correct it. Change-Id: I1fe9fc076b712f27407c5f2735b15e64fb55e72e Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28mb/google/poppy/variants/nautilus: set I2C speed to 400KHzChris Wang
Add "speed_config" for each I2C port configuration to set speed to 400KHz. BRANCH=master BUG=none TEST=compiled/verified Change-Id: Icb48733b87cefc92577547b1eab661a8cbb12be6 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22589 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-28mb/google/poppy/variants/nautilus: Change IA/GT/SA slow slew rate settingsChris Wang
Change IA/GT/SA slow slew rate settings. System's audible noise will be reduced with them. - Slow slew rate for IA/GT/SA : fast/16 - Fast PKG C-state ramp for IA/GT/SA: disabled BRANCH=master BUG=none TEST=compiled/verified Change-Id: Ibf11aba7bafb3b02c510905d7d904507eee6394b Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: shkim <sh_.kim@samsung.com>
2017-11-28spi/tpm.c do not waste time on wake pulses unless necessaryVadim Bendebury
The Cr50 secure chip implementation is guaranteed not to fall asleep for 1 second after any SPI slave activity. Let's not waste time on the wake up ping when it is not necessary. BRANCH=cr50 BUG=b:68012381 TEST=using a protocol analyzer verified that the wake pulses are generated only when the new coreboot stage or depthcharge start, not on every SPI slave transaction. Change-Id: Id8def1470ba3eab533075b9e7180f8a58e0b00b6 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/22321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-28intel/common/block: Add SKL CSME device IDSubrata Banik
This patch ensures SKL code is using CSME common PCI driver. TEST=Build and boot soraka/eve. Change-Id: Ic229c60e434d83eb4a3e5392ce90a7d47fddbd73 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-28mb/google/soraka: configure WLAN_PE_RST gpio in early_gpio_tableDivya Chellap
On shutdown, Soraka enters Deep S5 and not S5 state. Setting pad reset config of a gpio to RSMRST will not preserve the gpio config across deepSx and the gpio should be configured again. The WLAN_PE_RST signal should be brought up early in the bootflow for giving the device enough time to initialized before PCIE init in FSP-S. Hence, the gpio WLAN_PE_RST (GPP_B8) pad configuration is done in early pad configuration in bootblock also. BUG=b:64386481 BRANCH=none TEST= WiFi functionality across S5, S3, DeepS3, S0ix and warm/cold reboot. Change-Id: I5c7a4a3871a3bff69c1136379c78a8368c6258a6 Signed-off-by: Divya Chellap <divya.chellappa@intel.com> Reviewed-on: https://review.coreboot.org/22587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-11-28AMD platforms: Fix ASL comment that implies "\_SB" is southbridgeMartin Roth
Change-Id: I6ee86396a1c5aaee248a275b42da801cedace586 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-28mb/google/poppy/variants/nautilus: correct the SIO_EC_ENABLE_P2SK typoChris Wang
correct the typo from SIO_EC_ENABLE_P2SK to SIO_EC_ENABLE_PS2K. BRANCH=master BUG=b:66462881 TEST=compiled/boot to ChromeOS. Change-Id: Iaded458e202bc975c73cd295f7b363e2c9bfa861 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: shkim <sh_.kim@samsung.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-28mb/google/poppy/variants/nautilus: remove ALS for nautilusChris Wang
nautilus doesn't support ALS. remove the definition from ec.h. BRANCH=master BUG=b:66462881 TEST=compiled/boot to ChromeOS. Change-Id: Ib357328799015f78b18cd260db221e524e98cef7 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: shkim <sh_.kim@samsung.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-28mainboard/google/kahlee: Update Grunt for 16MB ROM chipMartin Roth
- Update Grunt to 16MB chip in Kconfig. - Move chromeos.fmd into variant directory & update Kconfig with the new location. - Add Grunt specific chromeos.fmd file. BUG=b:69691210 TEST=Build grunt; Build & Boot Kahlee Change-Id: I8d2f5e3255984d0d9a18df560f84f6db03b73a78 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-11-28mainboard/google/kahlee: Update chromeos.fmdMartin Roth
- Remove SI_ALL section. This is no longer needed as the PSP dirctory is placed into the RO coreboot section. - Add 1MB Legacy section. - Add Memory cache section. These sections are called "MRC", which is an Intel term, but AMD platforms will use the same regions for saving the same sort of data. BUG=b:65497959, b:67035984 TEST=Build & boot kahlee Change-Id: I5e41a0aa6bd4b29b8014c6559126a29cd7ed45d8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22579 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-27google/fizz: correct memory rcomp settingsKane Chen
Follow the schematic and Doc 573387 to correct the rcomp and rcomp target settings for fizz TEST= boot ok and the system can enter and resume from S3. Change-Id: Iffa90461509cfadaca20e335a6655e549e79e749 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/22479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-27drivers/net: add SSDT ACPI declaration and WOL featureGaggery Tsai
This patch adds SSDT ACPI generator and declares _UID, _HID, _DDN and also _PRW for WOL feature. Besides, adds a wake variable in chip information. BUG=b:69290148 BRANCH=None TEST=Add register "wake" = "GPE0_PCI_EXP" in devicetree under r8168 chip driver && dump SSDT to make sure _UID, _HID, _DDN and _PRW are filled correctly && put system into S3 && sudo etherwake -i eth0 $MAC to make sure the system could be woken up by WOL package. Change-Id: Ibc9115e8a08ba2bfcb3ee1e34c73cf1976a6ba2d Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/22480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-25google/fizz: Remove tpm i2c configs from KconfigShelley Chen
We are disabling tpm over i2c, so the configs are not needed anymore. BUG=b:65056998 BRANCH=None TEST=emerge fizz and make sure can still boot up. Change-Id: Id88f32fa952801749544534442fc15d85fc1a892 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/22577 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-25google/fizz: Disable unused i2c linesShelley Chen
As cr50 has now switched to using SPI, no need to enable the i2c1 anymore. Additionally, disabled unused I2C devices -- I2C0, I2C2 and I2C3. BUG=b:69374421 BRANCH=None TEST=test on fizz celeron. Make sure /dev/tpm0 created on (many) reboots. cat /proc/interrupts. Make sure # interrupts for 16 after booting is reasonable (not > 10k) and idma64.0, i2c_designware.0 are not listed with that interrupt line anymore. Should look something like this: 16: 1174 0 IO-APIC 16-fasteoi i801_smbus, snd_soc_skl, AudioDSP Change-Id: Iac3e31264a937a1d7ed6bd41632e7e065317781b Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/22576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-23soc/intel/cannonlake: Add PM methods to power gate SD card controllerVaibhav Shankar
When system enters S0ix, system fails to power gate SD card controller. This patch implements PM methods to put the SD card controller in D3 during S0ix entry. TEST=Suspend and resume using 'echo freeze > /sys/power/state'. The System should not be blocked by sd card controller. Change-Id: I9a9fe14fb6cd3b76ee95c565b3359cdae1a3c445 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/22487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-11-23google mainboards: select SYSTEM_TYPE_LAPTOP where appropriateMatt DeVillier
Some Google boards are missing this selection, leading them to being incorrectly identified as type 'Desktop' in SMBIOS type 3 table. Correct this by adding 'select SYSTEM_TYPE_LAPTOP' to the boards' Kconfigs. TEST: boot Linux and check correct chassis type listed via dmidecode Change-Id: Ib1145e314812a3f300cfd1a435a687aa0862158a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-23src/mainboard: Fix various typosJonathan Neuschäfer
These typos were found through manual review and grep. Change-Id: Ia5a9acae4fbe2627017743106d9326a14c99a225 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-23soc/intel/cannonlake: Invoke pmc and hard reset only if CSE fails to resetJohn Zhao
If CSE fails to do a global reset with the calling sequence of heci reset/send/receive, then invoke pmc and hard reset. TEST= Force global reset from early or late romstage. The function send_heci_reset_message has the calling sequence of heci reset/send/receive. It is observed timed out error (associated with heci_receive) occurs only if global reset is forced during early romstage. If global reset is trigged at late stage (i.e, after fsp_memory_init), then no timed out error and CSE handles reset properly. Change-Id: I5bb12554e5745d7704a1b684a3a51034bb35f787 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22549 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-23Constify struct cpu_device_id instancesJonathan Neuschäfer
There is currently no case where a struct cpu_device_id instance needs to be modified. Thus, declare all instances as const. Change-Id: I5ec7460b56d75d255b3451d76a46df76a51d6365 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-23sb/intel/i82801jx: Store initial timestamp in bootblockArthur Heymans
The function to fetch this timestamp is already present. Change-Id: I760aea8a867339764be9ca627b2ccdff4fd18e30 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 09:48:40 +0000