summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2017-01-12soc/marvell/mvmap2315: Mark mvmap2315_reset() as noreturnMartin Roth
mvmap2315_reset() is called from locations where we're checking for NULL pointers. Because coverity can't tell from the code that the functions are not returning, it's showing errors of accessing pointers after we've determined that they're invalid. Mark it as noreturn, and add a loop in case the reset isn't on the next instruction. This probably isn't needed, but shouldn't hurt. Found-by: Coverity Scan #1362809 Change-Id: If93084629d5c2c8dc232558f2559b78b1ca5de7c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18103 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-12sb/intel/ibexpeak: Update debug code to match other chipsMartin Roth
Other chips dump tco_status here if it wasn't handled, which makes sense. tco_sts can't be zero here, because the call would have already returned if it were. Also, dump_tco_status wouldn't print anything if tco_sts were zero. This will still only print the debug information if DEBUG_SMI is enabled in Kconfig, so in general, this change won't have much of an effect on anything. Found-by: Coverity Scan #1229598 Change-Id: Id2c69a16817ba18dfa051f514138fbc04a2f7bee Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18101 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-123rdparty: update arm-trusted-firmware submoduleMartin Roth
Updated to arm-trusted-firmware TOT: 236c27d2 (Merge pull request #805 from Xilinx/zynqmp/addr_space_size) 183 commits between Sep 20, 2016 and January 10, 2017 - Also add associated change to src/soc/rockship/rk3399 Makefile.inc that is required to build the M0 Firmware. Change-Id: I49695f3287a742cd1fb603b890d124f60788f88f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18024 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-01-12sb/intel/fsp_rangeley: Fix NULL check in gpio.cMartin Roth
This should always have been an and, not an or. The only way this would happen is if no GPIOs were getting configured, so we shouldn't ever have a NULL here, but if we did, GPIOs would be randomly configured, which would have 'interesting' results. Found-by: Coverity Scan #1229633 & 1229632 Change-Id: If123372658383f84279738e1186425beba3208ca Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18095 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-12google/chromeos: disable platform hierarchy on resume for TPM2Aaron Durbin
On Chrome OS devices that use TPM2 parts the platform hierarchy is disabled by the boot loader, depthcharge. Since the bootloader isn't involved in resuming a suspended machine there's no equivalent action in coreboot to disable the platform hierarchy. Therefore, to ensure consistent state in resume the platform hierarchy in the TPM2 needs to be disabled as well. For systems that resume using the firmware the platform hierarchy is disabled when utilizing TPM2 devices. BUG=chrome-os-partner:61097 BRANCH=reef TEST=Suspend and resume. Confirmed 'stop trunksd; tpmc getvf; start trunksd' shows that phEnable is 0. Change-Id: I060252f338c8fd68389273224ee58caa99881de8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18096 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-01-12amd/mct/ddr2: Remove orphaned Tab_TrefT_k variableTimothy Pearson
The orphaned Tab_TrefT_k causes a failure to build due to an unused variable warning on GCC 6. Remove this variable. Change-Id: Ida680a6a3bc2b135755dd582da8c6edb8956b6ff Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/18094 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-12fsp 1.0 systems: Check for NULL when saving HobListPtrMartin Roth
Die if cbmem_add can't allocate memory for the hob pointer. This shouldn't ever happen, but it's a reasonable check. - fsp_broadwell_de already had a check, but it returned to someplace inside the FSP. Just die instead. Change-Id: Ieef8d6ab81aab0ec3d52b729e34566bb34ee0623 Found-by: Coverity Scan #1291162 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18092 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-01-11chromeos: fix build issues within sar.cRobbie Zhang
Build issues were somehow overlooked in commit ed840023a84915ece4bc63edffef979926107d55: 1. hexstrtobin is not defined (needs the lib.h); 2. coreboot default compiler doesn't like variable initialization within for loop. BUG=chrome-os-partner:60821 TEST=Build and boot lars and reef Change-Id: Ie52c1f93eee7d739b8aaf59604875f179dff60d0 Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Reviewed-on: https://review.coreboot.org/18076 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-11amd/mct/ddr3: Fix unintended sign extension warningTimothy Pearson
An unintended sign extension warning was thrown by Coverity. Explicitly state the length of the constant multiplier. Found-by: Coverity Scan #1347342 Change-Id: Icd42eec13be04fc5fd2ffc85320cbadafc852148 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/18077 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2017-01-11amd/mct/ddr3: Avoid using uninitialized register address in ECC setupTimothy Pearson
Logic inside mct_EnableDimmEccEn_D uses an unintialized variable as a register address under certain conditions. Refactor mct_EnableDimmEccEn_D to use the explicit address of the register in all cases. Found-by: Coverity Scan #1347337 Change-Id: I6bc50d0524ea255aa97c7071ec4813f6a3e9c2b8 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/18079 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-11skylake: Do not pass VBT to FSP if display init not requiredDuncan Laurie
The FSP 2.0 change broke the logic for determining whether or not to execute the GOP binary. Modify the FSP 2.0 code to do the right thing and check for display_init_required() before passing VBT into FSP and the GOP binary. BUG=chrome-os-partner:61726 TEST=disable developer mode and ensure FSP does not run GOP Change-Id: I7fc8055b6664e0cf231a8de34367406eb049dfe1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18084 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-01-11nb/i945/raminit.c: Use Makefile.inc instead of '#include rcven.c'Arthur Heymans
Change-Id: Ib86600b687c7002646ca82d5fa52121b6eafcd60 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18087 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-11amd/mct/ddr3: Free malloced resources in failure branchesTimothy Pearson
Malloced resources were not freed in failure branches during S3 parameter save. Clean up Coverity warnings by freeing resources in failure branches. Found-by: Coverity Scan #1347344 Change-Id: I5f119874e52ef2090ca1579db170a49a2a6a0a2a Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/18074 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-11amd/mct/ddr3: Rework memory speed to clock value conversion logicTimothy Pearson
The existing DRAM clock speed to configuration value logic contained an error resulting in a theoretical out of bounds read. While this would not be hit on real hardware, it was prudent to clean up the logic to avoid the associated Coverity warning. Found-by: Coverity Scan #1347353 Change-Id: Ic3de3074f51d52be112a2d6f2d68e35dc881dd2e Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/18073 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-11amd/mct/ddr3: Correctly program maximum read latencyTimothy Pearson
The existing code inadvertently calculated the maximum read latency for nonexistent channel 2 instead of for channels 0 and 1 as intended. Fix the calls to the maximum read latency training function. Found-by: Coverity Scan #1347354 Change-Id: If34b204ac73cd20859102cc3b2f40bc99c2ce471 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/18072 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2017-01-10SPD_CACHE: Drop debug statementKyösti Mälkki
Output from CBFS functions is enough. Change-Id: I94d4a20a24f88eeacbe4aeb2e03a15974d18b16c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17923 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-10SPI: Fix command-response behaviorKyösti Mälkki
Fix SPI flash ops regressions after commit: c2973d1 spi: Get rid of SPI_ATOMIC_SEQUENCING When spi_flash_cmd() is called with argument response==NULL, only send out command without reading back the response. Change-Id: I28a94f208b4a1983d45d69d46db41391e267891d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18082 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-01-10amd/mct/ddr3: Allow critical delay delta to go negativeTimothy Pearson
The critical delay delta was incorrectly specified as an unsigned short. Use a signed short instead. Found-by: Coverity Scan #1347355 Change-Id: I37d769afb8c8af85a0375ae459e9d4ab0adcca74 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/18071 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2017-01-10amd/mct/ddr3: Correctly configure CsMux45Timothy Pearson
The existing logic to set up CsMux45 used an incorrect mask and comparison value due to a copy + paste editing error. Use the correct mask and comparison value for the last two values. Found-by: Coverity Scan #1347385 Change-Id: Ic08a52977df90b9952e434e71cd12dbc6d7e1443 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/18070 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-10amd/mct/ddr3: Wait for northbridge P-state transitionsTimothy Pearson
The existing code waiting for northbridge P-state transitions contained a logical error preventing correct operation. Fix the logical error and force coreboot to wait for the P-state transitions per the BKDG. Found-by: Coverity Scan #1347388 Change-Id: I35f498c836db1439734abe684354c18c8e160368 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/18069 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2017-01-10cpu/intel/model_6fx: Add Conroe-L to cpu_device_id listArthur Heymans
Tested with Intel® Celeron® Processor 420. Change-Id: I63d308477a22a9e55ceed1b6b36e63a3044c2354 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18057 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-10nb/intel/945gc: Hardcode the integrated graphic frequenciesArthur Heymans
The code to set the igd frequencies is written with the mobile version of the 945 chipset in mind and seems to cause cause strange igd related problems on the desktop versions. Some possible problems are: * on 800MHz fsb CPUs the igd sometimes has artifacts on the screen; * on 800MHz fsb CPU memtest results vary a lot; * since a commit 45e11aa0a5 "Add/Combine Broadwell Chromebooks using variant board scheme" that does not affect this northbridge, the display shows garbage as soon as Linux (4.8) modesets the display. A fix is to hardcode the core display and render clocks to their maximum, potentially also improving graphical performance. Vendor bios on all boards in coreboot with this northbridge have the same value in this PCI config address. TESTED on P5GC-MX (display works fine again in Linux) and user reports of it making GA-945GCM-S2L run more stable. Change-Id: I8b046edbc952631d9b79023e3d385160ff682c24 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17981 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-10amd/mct/ddr3: Fix incorrect DQ mask calculationTimothy Pearson
On AMD DDR3 platforms, the upper DQMask was incorrectly calculated, leading to undefined behaviour and possible DRAM training faults. Use the correct calculation for the upper DQMask. Found-by: Coverity Scan #1347394 #1347393 Change-Id: If3190eb7c30f1f00d6fd8b751bc1761c9d119782 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/18068 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-10mb/lenovo/t400: Increase MAX_CPUS to 4Arthur Heymans
The Lenovo T400 has a CPU socket that can fit quad cores. Change-Id: I585775ac9510cc7d2c2d731531f536c1a56b81e8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18059 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-10amd/mct/ddr2|ddr3: Refactor persistent members of DCTStatStrucTimothy Pearson
Several members of DCTStatStruc are designed to persist across resets of all other members. Move the persistent members into a substructure in order to simplify the reset logic and avoid compiler warnings / UB. Change-Id: I1139b7b3b167d33d99619338d42fcd26e2581a5d Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/18058 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-10amd/hudson/agesa: Fix position of hudson_fwmRicardo Ribalda Delgado
AMDFWTOOL calculates the location of the amdfw based on the CONFIG_ROM_SIZE. If HUDSON_FWM_POSITION does not match that location the resulting rom does not boot. This patch forces the position of HUDSON_FWM_POSITION to be the position calculated by amdfwrom. Tested on a Bettong derivative with a 16MiB flash. Change-Id: I3ce69f77174327c18ff97e551c0665c9f633991e Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-on: https://review.coreboot.org/17934 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-01-10amd/hudson/pi: Fix position of hudson_fwmRicardo Ribalda Delgado
AMDFWTOOL calculates the location of the amdfw based on the CONFIG_ROM_SIZE. If HUDSON_FWM_POSITION does not match that location the resulting rom does not boot. This patch forces the position of HUDSON_FWM_POSITION to be the position calculated by amdfwrom. Tested on a Bettong derivative with a 16MiB flash. Change-Id: Id2ee96ee076293d48ade84fd6e976ca994dcf491 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-on: https://review.coreboot.org/17925 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-01-10intel/i82801dx: Support 2MiB FWH partKyösti Mälkki
Default setting of southbridge assigned 1MiB of memory for FWH ID 0, while 2MiB is commercially available. Only remap IDs when large ROM is requested in case some board uses multiple FWH parts. Change-Id: I500425f42f755f911d84c6f94a9f3ab5a1ca0b51 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17918 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-01-09chromeos: Implement locating and decoding wifi sar data from VPDRobbie Zhang
A VPD entry "wifi_sar" needs to be created which contains a heximal encoded string in length of 40 bytes. get_wifi_sar_limits() function retrieves and decodes the data from the VPD entry, which would later be consumed by platform code. BUG=chrome-os-partner:60821 TEST=Build and boot lars and reef Change-Id: I923b58a63dc1f8a7fdd685cf1c618b2fdf4e7061 Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Reviewed-on: https://review.coreboot.org/17958 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-09amd/pi: Make BottomIo position configurableRicardo Ribalda Delgado
Some PCI peripherals, such as FPGA accelerators, require a great amount of memory mapped IO. This patch allows the user to select at build time the bottom IO to leave enough space for such devices. We cannot calculate this value at runtime because it has to be set before the PCI devices are enumerated. Change-Id: Ic590e8aa8b91ff89877cbff6afd10614d33dcf8d Credit-to: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-on: https://review.coreboot.org/17980 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-01-06Kconfig: Remind users to delete .config when switching boardsMartin Roth
Because Kconfig default values *ONLY* get set when they are first configured, if you switch mainboards with an existing .config, the values will not be set as expected for the new board. This seems to confuse most users, so put a warning in a visible location to let them know. Change-Id: Ie6a9c2d139ecd841d654943f14c119ebafd632f2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17939 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-01-06mb/asus/p5gc-mx: Use common/gpio.hArthur Heymans
Should have been included in 62902ca45d "sb/ich7: Use common/gpio.h to set up GPIOs", which was not rebased on addition of this board. Change-Id: If4547ee43ce6a7a6e4af67e9364613e48f989401 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18047 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2017-01-06nb/intel/*/northbridge.c: Remove #include <device/hypertransport.h>Arthur Heymans
Nothing from that header is used or even declared since CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT is not selected on Intel hardware. Change-Id: I9101eb6ffa6664a2ab45bc0b247279c916266537 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18044 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2017-01-06sb/ich7: Use common/gpio.h to set up GPIOsArthur Heymans
This is more consistent with newer Intel targets. This a static struct so it is initialized to 0 by default. To make it more readable: * only setting to GPIO mode is made explicit; * only pins in GPIO mode are either set to input or output since this is ignored in native mode; * only output pins are set high or low, since this is read-only on input; * blink is only operational on output pins, non-blink is not set explicitly; * invert is only operational on input pins, non-invert is not set explicitly. Change-Id: I05f9c52dee78b7120b225982c040e3dcc8ee3e4e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17639 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-06arch/x86: fix cmos post logging in non romcc bootblockAaron Durbin
cmos_post_init() is called in src/arch/x86/bootblock_simple.c, and that function is reponsible for bootstrapping the cmos post register contents. Without this function being called none of the cmos post functionality works correctly. Therefore, add a call to lib/bootblock.c which the C_ENVIRONMENT_BOOTBLOCK SoCs use. BUG=chrome-os-partner:61546 Change-Id: I2e3519f2f3f2c28e5cba26b5811f1eb0c2a90572 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18043 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-01-05src/amd: Add common definition of AMD ACPI MMIO addressTimothy Pearson
The bare ACPI MMIO address 0xFED80000 was used in multiple AMD mainboard files as well as the SB800 native code. Reduce duplication by using a centrally defined value for all AMD ACPI MMIO access. Change-Id: I39a30c0d0733096dbd5892c9e18855aa5bb5a4a7 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/18032 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-05mb/ga-m57sli-s4: Fix early uart outputArthur Heymans
The console output is garbled until it is fixed in ramstage by devicetree which sets the uart clock predivider correctly. Change-Id: I6d6ec0febfec98a8d4a71e1476036c804cf5f08d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17969 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-01-04google/auron: Fix omitted ACPI KB backlight for variantsMatt DeVillier
Restores KB backlight functionality for auron variants gandof, lulu, and samus. TEST: boot Lulu and observe KB backlight functional Change-Id: Iaa852f9327ff1690111db610b4cc5266cd7925b4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17960 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-04vboot: Remove rmu.bin from FW_MAIN_A and FW_MAIN_BLee Leahy
Add rmu.bin to the list of files that exist only in the read-only section (COREBOOT) of the SPI flash. TEST=Build and run on Galileo Gen2. Change-Id: I30cbd3fb2ef1848807e4de4c479dc7a561c1faba Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18031 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-04amdfam10: Perform major include ".c" cleanupDamien Zammit
Previously, all romstages for this northbridge family would compile via 1 single C file with everything included into the romstage.c file (!) This patch separates the build into separate .o modules and links them accordingly. Currently compiles and links all fam10 roms without breaking other roms. Both DDR2 and DDR3 have been completed TESTED on REACTS: passes all boot tests for 2 boards ASUS KGPE-D16 ASUS KFSN4-DRE Some extra changes were required to make it compile otherwise there were unused functions in included "c" files. This is because I needed to exchange CIMX for the native southbridge routines. See in particular: advansus/a785e-i asus/m5a88-v avalue/eax-785e A followup patch may be required to fix the above boards. See FIXME, XXX tags Change-Id: Id0f9849578fd0f8b1eab83aed910902c27354426 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/17625 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
2017-01-04intel/i945 boards: Add romstage time stampsPaul Menzel
Currently, some Intel 945 boards miss some or all of the time stamps *1:start of rom stage*, *2:before ram initialization*, and *3:after ram initialization*, so add them. Use the same formatting as used for the board Lenovo X60, which already has code for all the time stamps. Change-Id: Ie25747d02fadd74b7d7b7cab234a7a88b2cc0c42 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/17993 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-01-04soc/intel/quark: Add monotonic timer supportLee Leahy
Add the Kconfig value HAVE_MONOTONIC_TIMER and the routine to read the TSC for the monotonic timer. Simplify the routine to get the TSC frequency. TEST=Build and run on Galileo Gen2 Change-Id: I806fb864b01e39277bf2d6276254b0543930c2f6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18002 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03broadcom/bcm5785: don't treat KBC-DATA as COM1Patrick Georgi
Add a break statement instead. While there, fix a bunch of typos in comments. Change-Id: I465c0188d4b46eabf8d17e69fa0fdc6a9c2ad66e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1229645 Reviewed-on: https://review.coreboot.org/18013 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03vboot: Clear battery cutoff flags when vbnv_cmos loads backup VBNV.Hung-Te Lin
When CONFIG_VBOOT_VBNV_CMOS_BACKUP_TO_FLASH is set, vbnv_cmos will try to load VBNV from flash if the VBNV in CMOS is invalid. This is usually correct, except the case of battery cut-off. CMOS will always be invalid after battery cut-off if there is no RTC battery (or if that is dead). However, in current implementation the backup in flash is only updated in coreboot, while the real battery cutoff (and the clearing of cutoff flags in VBNV) is done in payload (Depthcharge) stage. This will create an endless reboot loop that: 1. crossystem sets battery cutoff flag in VBNV_CMOS then reboot. 2. coreboot backs-up VBNV_CMOS to VBNV_flash. 3. Depthcharge sees cutoff flag in VBNV_CMOS. 4. Depthcharge clears cutoff flag in VBNV_CMOS. 5. Depthcharge performs battery cutoff (CMOS data is lost). 6. (Plug AC adapter) Reboot. 7. Coreboot sees invalid VBNV_CMOS, load backup from VBNV_flash. 8. Jump to 3. As a result, we should always clear battery cutoff flags when loading backups from VBNV_flash. BRANCH=glados,reef BUG=chrome-os-partner:61365,chrome-os-partner:59615 TEST=emerge-reef coreboot bootimage; Change-Id: I3250a3a179a7b0de9c6e401e4a94dcd23920e473 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/423460 Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/18008 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03rockchip/common: Loosen I2C frequency target requirementsJulius Werner
I've recently added an assertion to ensure that the effective I2C frequency on Rockchip SoCs is not too far off the 400KHz target due to divisor rounding errors. A 10KHz margin worked fine for RK3399, but it turns out that RK3288 actually only ever hit 387KHz since its I2C clocks are based off the already pretty low 75MHz PCLKs. While we could probably change the PCLKs to make this closer, that seems like a too intrusive change for something that has already worked just fine for years, so just loosen the restriction a little more instead. BRANCH=None BUG=chromium:675043 TEST=None Change-Id: I7e96a1a75b38f8ad3971dd33046699cceb17b80d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/421095 Reviewed-by: Randall Spangler <rspangler@chromium.org> Reviewed-on: https://review.coreboot.org/18007 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03i2c/tpm: Ignore 0xFF bytes for status and burstCountJulius Werner
We've found that the SLB9645 TPM sometimes seems to randomly start returning 0xFF bytes for all requests. The exact cause is yet unknown, but we should try to write our TIS code such that it avoids bad interactions with this kind of response (e.g. any wait_for_status() immediately succeeds because all "status bits" are set in the response). At least for status and burstCount readings we can say for sure that the value is nonsensical and we're already reading those in a loop until we get valid results anyway, so let's add code to explicitly discount 0xFF bytes. BRANCH=oak BUG=chrome-os-partner:55764 TEST=None Change-Id: I934d42c36d6847a22a185795cea49d282fa113d9 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/420470 Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/18006 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03Revert "google/oak: increase the driving strength for 4GB DRAMs"Nicolas Boichat
This reverts commit 34a6537512d412363bf56428b7ae284e6dd80fb3, which appears to cause random stability issues on some elm units. BRANCH=oak BUG=chrome-os-partner:60869 BUG=chromium:673349 TEST=None Change-Id: I5ce9e2673db1bc7a1f487a3c3bcce4651a5e3567 Reviewed-on: https://chromium-review.googlesource.com/419862 Commit-Ready: Nicolas Boichat <drinkcat@chromium.org> Tested-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18005 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03soc/intel/quark: Add early debugging codeLee Leahy
Add Kconfig values and early debugging code to better segment and debug the early code in bootblock by using the SD LED as an indicator. Update the help text for the debug Kconfig values to point to the various failure locations. TEST=Build and run on Galileo Gen2 Change-Id: I1cd62eba3e9547cb1dd7f547aaec5d4827e14633 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/17985 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03soc/intel/quark: Fix serial port configurationLee Leahy
Fix serial port configuration broken by how PCI configuration space was referenced introduced by change 3d15e10a (MMCONF_SUPPORT: Flip default to enabled). TEST=Build and run on Galileo Gen2 Change-Id: I2ab52cf598795e94f1f16977f8d12b7fdd95e146 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/17984 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03mb/asus/p5gc-mx: Remove extra BSEL strap checkArthur Heymans
This extra check is based on comparing CPU BSEL pins and reports in MCH configuration. This gives false positives in the case of 1333MHz CPUs which automatically get downgraded to 1067MHz by the northbridge (max supported frequency by 945gc). TESTED with Intel Xeon 5460 (does not boot but completes raminit) Change-Id: I34cb37912906c803abdad0adbd9c589ca86a67c7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17997 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-03mb/intel/d945gclf: Fix resume from S3 suspendArthur Heymans
Checking for dram self refresh in MCHBAR8(SLFRCS) generates false positives. Change-Id: I25afd565cae0269616e38ecbcdf385281bae5d1f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17996 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-03sb/nvidia/mcp55: Fix P_state generationArthur Heymans
amd_generate_powernow is never called by in lpc_slave_ops. Move it to lpc_ops like on all other AMD southbridges. TESTED on Gigabyte ga-m57sli-s4 Change-Id: I7db036e681d591a19e15dd3eaafb88b72a41bea1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17977 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03mb/ga-m57sli: Add cmos.defaultArthur Heymans
If the cmos checksum is incorrect it should fall back to sane defaults. Change-Id: If16cfc73effd4a825d0cefcd30bfd0e48b2d9132 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17968 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-03google/snappy: Update DPTF settingsWisley Chen
1. Update DPTF TSR1/TSR2 passive/critial trigger points. TSR1 passive point:53, critial point:80 TSR2 passive point:90, critial point:100 2. Update PL1 Min to 4W and PL1 Max to 12W 3. Update thermal relationship table (TRT) setting. BUG=none BRANCH=master TEST=build, boot on snappy dut and verified by thermal team member. Change-Id: I8b4fb178daa7c2e4091a14779a125bd5e943d023 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17955 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-03mainboard/google/reef: Update DPTF parameters EVT1_v0.3Tim Chen
Update the DPTF parameters based on thermal test result. (ZHT_DPTF_EVT1_v0.3_20161227.xlsx) 1. Update DPTF CPU/TSR1/TSR2 passive/critial trigger points. CPU critical point:103 TSR1 passive point:45 TSR2 passive point:55, critical point:90 2. Change thermal relationship table (TRT) setting. Change CPU Throttle Effect on CPU sample rate to 3secs Change Charger Effect on Temp Sensor 2 sample rate to 60secs Change CPU Effect on Temp Sensor 1 sample rate to 8secs BUG=chrome-os-partner:60038 BRANCH=master TEST=build and boot on electro dut Change-Id: I3746750f7ea4a2e01153a36c28a5c33140c9e38c Signed-off-by: Tim Chen <Tim-Chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17975 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-03sb/intel/common/gpio: Support ICH9M and priorPatrick Rudolph
Write gpio level twice to make sure the level is set after pins have been configred as GPIO and to minimize glitches on newer hardware. Required to set correct GPIO layout on T500. Tested on T500. Change-Id: I691e672c7cb52ca51a80fd29657ada7488db0d41 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18012 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins)
2016-12-30drivers/uart/oxpcie_early.c: remove uart_fill_lb()Martin Roth
uart_fill_lb() was added to drivers/uart/uart8250mem.c, so when the Oxford OXPCIe952 Kconfig option is enabled, we were getting an error. "multiple definition of `uart_fill_lb'" The new version of uart_fill_lb sets the regwidth depending on the Kconfig symbol DRIVERS_UART_8250MEM_32, so if that's selected, don't give DRIVERS_UART_OXPCIE as a choice. Change-Id: Ife24ab390553b10b2266809595c2e06463de708c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17966 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-29Kconfig: Document what ASPM meansJonathan Neuschäfer
Change-Id: I57dd933ad70ffac95388d832bd5047f2225688e3 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17973 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-28mb/asus/p5gc-mx: Fix and complete SIO devicetree optionsArthur Heymans
The devicetree lacks the 'chip' option for the Super I/O, which causes the Super I/O related entries to be ignored. This also adds other LDN that are present on this Super I/O. Change-Id: Ida1b3c6575aa53bc7060070835c811665bdc1db1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17965 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-28Microcode: Show a useful warning when microcode bins are missingMartin Roth
Because the binary repo is disabled by default, we get frequent questions about why the build failed, relating to microcode in the binary repository. - Show an error saying that the file is missing instead of the typical make error of no rule to build the file. - Show a note encouraging users to try enabling the binary repo if it's not enabled. Change-Id: If4148c18cfb781ed2932bd2ae4a289b621afdebf Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17940 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-27device/dram/ddr3: add FTB timingsNicola Corna
SPD revision 1.1 introduced FTB timings, an extra set of SPD values that specify a more precise tCKmin, tAAmin, tRCDmin, tRPmin and tRCmin. For backwards compatibility, the MTB is usually rounded up and the FTB part is negative. For this reason some memories were not set up optimally, as the FTB part was ignored and the resulting timing wasn't set to the minimum value. The tests were performed on a Lenovo X220 with two Micron 8KTF51264HZ-1G9E (1866 MHz): reading only the MTB part, coreboot reports a tCKmin of 1.125 ns, corresponding to a working frequency of 800 MHz; with the additional tCKmin FTB part (-0.054 ns) the new (rounded) value is 1.070 ns, valid for a 933 MHz operation. Tested also with Ballistix DDR3-1866 SODIMM on Lenovo T420: the memory is now detected as DDR3-1866 instead of DDR3-1600. Some manufacturers (like Micron) seems to expect a small rounding on the timings, so a nearest-value rounding is performed. If this assumption isn't correct, an error up to ~2 ps can be committed, which is low enough to be safely ignored. Change-Id: Ib98f2e70820f207429d04ca6421680109a81f457 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/17476 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-27console: Enable do_printk_va_list for VBOOTLee Leahy
Use CONFIG_VBOOT to enable do_printk_va_list to match the conditionals in include/console/console.h and the only caller is vboot/vboot_logic.c. CONFIG_VBOOT is also selected for CONFIG_CHROMEOS. TEST=Build and run on Galileo Gen2 Change-Id: Ia115c74afa498a14d5edd6f7940ec2edc124516f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/17967 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-27cpu/intel/common: Add/Use common function to set virtualizationMatt DeVillier
Migrate duplicated enable_vmx() method from multiple CPUs to common folder. Add common virtualization option for CPUs which support it. Note that this changes the default to enable virtualization on CPUs that support it. Change-Id: Ib110bed6c9f5508e3f867dcdc6f341fc50e501d1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17874 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2016-12-26google/eve: Enable internal pull-up on PWRBTN#Duncan Laurie
Enable an internal pull-up on the power button input as a quick press is resulting in power button override being asserted. BUG=chrome-os-partner:61312 TEST=tested on eve P0b to ensure quick power button press does not result in a shutdown due to power button override. Change-Id: I3028cf7faef309cf4d60c3585b48adab6e1549d4 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17962 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-26amd-based mainboards: Fix whitespace in _PTS commentsMarshall Dawson
Correct tabs that were intended as spaces. Change-Id: Idcf33d829f87a866b5ed880527102918d5b93842 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17905 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-12-26mainboard/google/chell: Set TCC activation offset to 10 degree CSumeet Pawnikar
With the default TCC activation offset value as 0 and Tjmax temperature value as 100 degree C, Pcode firmware starts taking prochot action at 100 degree C [Tjmax-Offset]. But before Pcode firmware starts prochot action at 100 degree C, device is getting shutdown at 99 degree C due to DPTF critical CPU temperature. This patch sets TCC activation offset value to 10 degree C for thermal throttle action to prevent this kind of shutdown. BUG=chrome-os-partner:59397 BRANCH=None. TEST=Built, booted on skylake and verified target offset value. Change-Id: I0811ef481a4b3ce4bd6ef24f2aa8160f44f9c990 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/17921 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-26soc/intel/skylake: set TCC activation by BSP onlySumeet Pawnikar
TCC activation functionality has package scope. It was set for all CPU in the system which is unnecessary. In this patch TCC activation is being set by the BSP only. BUG=chrome-os-partner:59397 BRANCH=None. TEST=Built for skylake platform and verified the TCC activation value before and after S3. Change-Id: Iacf64cbc40871bbec3bede65f196bf292e0149a6 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/17889 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-23spi: Get rid of SPI_ATOMIC_SEQUENCINGFurquan Shaikh
SPI_ATOMIC_SEQUENCING was added to accomodate spi flash controllers with the ability to perform tx and rx of flash command and response at the same time. Instead of introducing this notion at SPI flash driver layer, clean up the interface to SPI used by flash. Flash uses a command-response kind of communication. Thus, even though SPI is duplex, flash command needs to be sent out on SPI bus and then flash response should be received on the bus. Some specialized x86 flash controllers are capable of handling command and response in a single transaction. In order to support all the varied cases: 1. Add spi_xfer_vector that takes as input a vector of SPI operations and calls back into SPI controller driver to process these operations. 2. In order to accomodate flash command-response model, use two vectors while calling into spi_xfer_vector -- one with dout set to non-NULL(command) and other with din set to non-NULL(response). 3. For specialized SPI flash controllers combine two successive vectors if the transactions look like a command-response pair. 4. Provide helper functions for common cases like supporting only 2 vectors at a time, supporting n vectors at a time, default vector operation to cycle through all SPI op vectors one by one. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I4c9e78c585ad95c40c0d5af078ff8251da286236 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17681 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-23soc/intel/skylake: Use the new SPI driver interfaceFurquan Shaikh
1. Define controller for fast SPI. 2. Separate out functions that are specific to SPI and flash controller in different files. BUG=chrome-os-partner:59832 BRANCh=None TEST=Compiles successfully for chell and eve. Change-Id: I2fe0ef937297297339d4ea19dc37d3061caaa80c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17933 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-22Add/Combine Broadwell Chromebooks using variant board schemeMatt DeVillier
Combine existing boards google/auron_paine and google/samus with new ChromeOS devices auron_yuna, gandof and lulu, using their common reference board (auron) as a base. Chromium sources used: firmware-yuna-6301.59.B 6ed8b9d [CHERRY-PICK: broadwell: Update to...] firmware-gandof-6301.155.B 666f34f [gandof: modify power limiting for...] firmware-lulu-6301.136.B 8811714 [lulu: update RAMID table] Additionally, some minor cleanup/changes were made: - I2C devices set to use level (vs edge) interrupt triggering - HDA verb entries use simplified macro entry format - correct FADT table header version - remove unused ACPI device entries / .asl file(s) - clean up ACPI code (e.g., trackpad on Lulu) - adjust _CID for trackpad on Lulu in order to not load non-functional Windows driver (does not affect Linux) - remove unused header includes (multiple/various) - correct I2C addresses used for SMBIOS device entries - correct misc typos etc The existing auron_paine samus boards are removed. Variant setup modeled after google/slippy Change-Id: I53436878d141715eb18b8ea5043d71e6e8728fe8 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17917 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-22Combine Broadwell Chromeboxes using variant board schemeMatt DeVillier
Combine existing boards google/guado, rikku, and tidus using their common reference board google/jecht as a base. Additional changes besides simple consolidation include: - simplify power LED functions - simplify HDA verb definitions using azelia macros - use common SoC functions to generate FADT table - correct FADT table header version - remove unused haswell_pci_irqs.asl - remove unused header includes (various) - set sane default fan speed (0x4d) for all variants Variant setup modeled after google/beltino Change-Id: I77a2dffe9601734916a33fd04ead98016ad0bc4b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17913 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-22mb/asus/p5gc-mx: Add mainboardArthur Heymans
Tested to work: * GPU (Nvidia gt210) in PCIe x16 slot; * SATA; * serial; * 800MHz and 1067MHz FSB Core 2 Duo CPUs; * ethernet; * native VGA graphic init. What does not work: * resume from s3 suspend; * superio hardware monitor (not initialised in coreboot). Quirks: * does not boot with just one dimm in slot B. Change-Id: Ide5494be7f2f16d6b5cfd2ccf4ec438f0587add5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17558 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-12-22agesa and binaryPI mainboards: Fix devicetree hudson commentsMarshall Dawson
Make the ending comment associated with "chip ...hudson" match the appropriate directory name. Change-Id: I5e0d6d41a2e3f963760aad08ed6108acac5b66b3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17904 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-12-21soc/intel/apollolake: allow ApolloLake SoC to use FSP CAR InitBrenton Dong
FSP v2.0 Driver supports TempRamInit & TempRamExit APIs to initialize & tear down Cache-As-Ram. Add TempRamInit & TempRamExit usage to ApolloLake SoC when CONFIG_FSP_CAR is enabled. Verified on Intel Leaf Hill CRB and confirmed that Cache-As-Ram is correctly set up and torn down using the FSP v2.0 APIs without coreboot implementation of CAR init/teardown. Change-Id: Ifd6fe8398ea147a5fb8c60076b93205bb94b1f25 Signed-off-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-on: https://review.coreboot.org/17063 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-21drivers/intel/fsp2_0: add FSP TempRamInit & TempRamExit API supportBrenton Dong
FSP v2.0 Specification adds APIs TempRamInit & TempRamExit for Cache-As-Ram initialization and teardown. Add fsp2_0 driver support for TempRamInit & TempRamExit APIs. Verified on Intel Leaf Hill CRB and confirmed that Cache-As-Ram is correctly set up and torn down using the FSP v2.0 APIs without coreboot implementation of CAR init/teardown. Change-Id: I482ff580e1b5251a8214fe2e3d2d38bd5f3e3ed2 Signed-off-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-on: https://review.coreboot.org/17062 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-21nb/i945/early_init.c: Add FSB800 and 1067 to Egress Port Virtual ChannelElyes HAOUAS
Values based on vendor bios and suggested by Arthur Heymans for FSB1067. FSB1067: The ratio 1067/800 is proportional to the ratio of EPBAR32(0x2c) bits: 0x1a / 0x14 ~ 1067/800 EPVC1IST: The ratio is also proportional to FSB ratios: 0x9c / 0xf0 ~ 533/800. Change-Id: Ib90e8ea1b82f2fcc3b5c199cace32a7f0aff4b5c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17198 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-12-20mb/google/slippy: Hook up libgfxinitArthur Heymans
Both HDMI and eDP work (simultaneously). TESTED on Acer C720 (peppy). Change-Id: Ifc4e3c187bcabd8965d9586237a52b440bfa7f20 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17916 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2016-12-20nb/intel/haswell: Hook up libgfxinitArthur Heymans
Change-Id: I55e2d99b3f9929703f34d268f4490f3c5c2c766f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17915 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-20mb/lenovo/x60: Remove PCI reset code from romstagePaul Menzel
Commit bf264e94 (i945:) adds a PCI reset to the romstage, and commit bc8613ec (Fix i945 based boards) fixes that to use the correct delay of 200 ms. This code was then copied over, when adding support for the Lenovo X60. The reset was related to the shipped crypto card on the Roda RK886EX and Kontron 986LCD-M, so is not needed on the Lenovo X60. So remove it. TEST=Build and boot on Lenovo X60t. Change-Id: Ia37d9f0ecf5655531616edb20b53757d5d47b42f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/17703 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-20google/eve: Fix configuration of some GPIOsDuncan Laurie
GPP_D12 needs an internal pull-up to get this rail working on current boards. GPP_D0-GPP_D3 were changed from SPI interface and I just missed this change earlier. BUG=chrome-os-partner:58666 TEST=test camera and touchpad on eve Change-Id: Idfa186f2930afbe5651f4e0fc11a19cd0dd4295f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17922 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-20riscv: enable counters via m[us]counterenRonald G. Minnich
The user and supervisor counters could not be safely enabled before as the register numbers were not finalized. Now that everyone agrees, we can enable them. Until we are sure the toolchains are caught up, we use the hardcode name with the register names in comments. As soon as toolchains settle down we'll do one more pass and convert to the symbolic names. Tested on lowrisc bitstream and SPIKE simulator. Change-Id: I21fe5cac44fafe4b7806e004c179aa27541be4b6 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17920 Tested-by: build bot (Jenkins) Reviewed-by: Alex Bradbury <asb@lowrisc.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Andrew Waterman <aswaterman@gmail.com>
2016-12-19drivers/spi: fix flash writes at page boundariesAaron Durbin
There was an assumption that all SPI controllers could consume a full page of data to write. However, that assumption doesn't hold when spi_crop_chunk() indicates sizes smaller than page size. If the requested offset isn't page aligned from the start then writes will fail corrupting data since a page boundary isn't honored. The spansion driver needed quite a bit more work to honor the spi_crop_chunk() result. It now mimics the other driver's code. Also, needed to add spi_crop_chunk() to marvell/bg4cd SoC to make google/cosmos build. SPI obviously doesn't work on that platform, but it fixes the build error. Change-Id: I93e24a5a717adcee45a017c164bd960f4592ad50 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17910 Tested-by: build bot (Jenkins) Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-12-19google/poppy: Add new boardFurquan Shaikh
Add poppy board files using kabylake and FSP 2.0. BUG=chrome-os-partner:60713 BRANCH=None TEST=Compiles successfully Change-Id: Ic9aa5093b319690ae893a21cab98d9b843000e6c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17866 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-12-19amd/mainboard: Clean up bettong, gardenia USB todosMarshall Dawson
An incorrect board name was propagated over various generations of mainboards. Correct the comments for these. Addressing the todo items will come in a later patch. Change-Id: I4abd028fee5087955a7b6ba8d38f99c8207d24b4 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17903 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2016-12-19motherboard/amd: Clean up bettong, gardenia makefilesMarshall Dawson
Declutter the conditional building of fchec.c. Use the CONFIG setting directly instead of ifeq (). Change-Id: I6d3721764e66e5615a639c1979d60ff1291b5d33 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17902 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2016-12-19amd/gardenia: Update ACPI routingMarshall Dawson
Reduce the Bettong devices and match up the comments to the northbridge. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from e7c38571be6406453640d671210b2074a91f162e) Change-Id: I53adff741f5cf2bd75c37421949bd30f214f5692 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17849 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-19drivers/intel/gma: Use scaling to simplify fb configNico Huber
Utilize libgfxinit's support for scaling to simplify the framebuffer configuration. In case of multiple displays of different resolutions, we had configured one framebuffer big enough for their union, each display only showing its respective upper left window. Instead, we use the smallest resolution now and show the whole image on all displays. Change-Id: I70a9d92f88ef891703829945264f94ac7eff09b0 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17492 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2016-12-19drivers/intel/gma: Add textmode support with libgfxinitNico Huber
Add an alternative gfxinit implementation for textmode. The legacy VGA plane and textmode is configured through coreboot provided functions. libgfxinit uses this plane as alternative to the usual high resolution plane. Change-Id: Iad0754c50fc6faec35f49583fe1c7cb50ac6c0c5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17279 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-12-19pcengines/apu2: add board supportPiotr Król
Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-12-19amd/gardenia: Add AHB bridge registers in ACPIMarshall Dawson
Add the region used by the A-Link to AHB configuration registers. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (squashed from 2c8dafdf44cf1a84cbc25e8aa381c04c160ee705 and 3c755f70ffa36c0fc92a1da0e3f5f877c8dc9e8b) Change-Id: I7398452c6e70b4545e16398f3fec157f2f30293a Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17848 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-19amd/gardenia: Add I2C devices to ACPIMarshall Dawson
Add the missing two I2C controllers. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from 0be00a96b9eb40c959a422a5ca4773d2353d244d) Change-Id: I3ea74a6c0472711102b19a7ca0209aaeeeb2d601 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17847 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-19amd/gardenia: Clean up GPIO ASLMarshall Dawson
Remove the unused Name field. Its previous design generates an FWTS error and a recommendation for changing it to Serialized. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 1d970f1aa16c647e56a08c83f5719041882a2fc0) Change-Id: I27748a4f84286e80043f516564ef64350ef3fef9 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17846 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-18ti/beaglebone: Define arch for omap-header buildKyösti Mälkki
Required to add rules.h as default include, otherwise we get error: ./src/include/rules.h:128:5: error: "__COREBOOT_ARM_ARCH__" is not defined [-Werror=undef] Previously, rules.h was not included in omap-header build at all. Change-Id: I75265916856f2f21f7966619ea65d63acd599e2f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17746 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-18AMD binaryPI: Promote rules.h to default includeKyösti Mälkki
Also remove config.h, kconfig.h will pull that one in. Change-Id: I798b3ffcf86fca19ae4b0103bb901a69db734141 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17667 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-18intel/fsp_rangeley: Fix use of __SIMPLE_DEVICE__Kyösti Mälkki
Required fix to have rules.h as default include. Change-Id: I6ce2d4e13de5139a84c709b5836ecd41c0abc836 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17747 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-18intel cache-as-ram: Move DCACHE_RAM_BASEKyösti Mälkki
Having same memory region set as both WRPROT and WRBACK using MTRRs is undefined behaviour. This could happen if we allow DCACHE_RAM_BASE to be located within CBFS in SPI flash memory and XIP romstage is at the same location. As SPI master by default decodes all of top 16MiB below 4GiB, initial cache-as-ram line fills may have actually read from SPI flash even in the case DCACHE_RAM_BASE was below the nominal 4GiB - ROM_SIZE. There are no reasons to have this as board-specific setting. Change-Id: I2cce80731ede2e7f78197d9b0c77c7e9957a81b5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17806 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-18intel/i82801ix: Add HAVE_INTEL_FIRMWAREKyösti Mälkki
Select this to provide menu in menuconfig to add flash descriptor file. ME or GbE firmwares themselves are not required, but integrated NIC MAC and SPI configuration fields are still useful. Change-Id: I14b86e2f38ec39924d2cbf0932d82f66ed356a03 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17805 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-18emulation/qemu-q35: Increase default ROM_SIZEKyösti Mälkki
Larger size fits GRUB payload and fixes case to build 82801ix with HAVE_INTEL_FIRMWARE. Change-Id: I90e33fb3a0b0e1a60dcc2a9a022bef034f3270d8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17830 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-18ACPI S3: Signal successful bootKyösti Mälkki
Just before jumping to OS wakeup vector do the same tasks to signal coreboot completion that would be done before entry to payload on normal boot path. Change-Id: I7514c498f40f2d93a4e83a232ef4665f5c21f062 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17794 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-18riscv: Add support for timer interruptsRonald G. Minnich
RISCV requires that timer interrupts be handled in machine mode and delegated as necessary. Also you can only reset the timer interrupt by writing to mtimecmp. Further, you must write a number > mtime, not just != mtime. This rather clumsy situation requires that we write some value into the future into mtimecmp lest we never be able to leave machine mode as the interrupt either is not cleared or instantly reoccurs. This current code is tested and works for harvey (Plan 9) timer interrupts. Change-Id: I8538d5fd8d80d9347773c638f5cbf0da18dc1cae Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17807 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>