Age | Commit message (Expand) | Author |
2014-05-13 | baytrail: don't SMI on tco timer firing | Aaron Durbin |
2014-05-13 | baytrail: clear the pmc wake status registers | Aaron Durbin |
2014-05-13 | baytrail: log reset, power, and wake events in elog | Aaron Durbin |
2014-05-13 | baytrail: snapshot power state in romstage | Aaron Durbin |
2014-05-13 | baytrail: add cpuid for C0 | Aaron Durbin |
2014-05-13 | rambi: Move KBD_IRQ pin for Rambi 2.0 board | Shawn Nematbakhsh |
2014-05-13 | src/*: Remove the last remnants of struct keyboard | Edward O'Callaghan |
2014-05-13 | superio/*: Remove redundant chip.h header | Edward O'Callaghan |
2014-05-13 | superio/*: Deal with some chip.h special cases | Edward O'Callaghan |
2014-05-13 | src/drivers/pc80: Remove empty struct keyboard | Edward O'Callaghan |
2014-05-13 | southbridge/amd/sb?00/lpc.c: Move i8254/i8259 down in southbridge | Edward O'Callaghan |
2014-05-12 | Rambi: Enable 32k SUSCLK signal | Kyösti Mälkki |
2014-05-12 | rambi: Make eMMC CLK pull-down and change pull strengths to 20K | Shawn Nematbakhsh |
2014-05-12 | baytrail: align with intel recommendations | Aaron Durbin |
2014-05-12 | rambi: specify reference code index in vboot area | Aaron Durbin |
2014-05-12 | baytrail: add way to load reference code from vboot area | Aaron Durbin |
2014-05-12 | baytrail: Expose IOSF as ACPI object | Duncan Laurie |
2014-05-12 | rambi: Disable HSUART2 and SPI interfaces | Duncan Laurie |
2014-05-12 | rambi: Enable SCC devices in ACPI mode | Duncan Laurie |
2014-05-12 | baytrail: Put devices in ACPI mode after setup | Duncan Laurie |
2014-05-12 | baytrail: Add header include wrapper and offset define | Duncan Laurie |
2014-05-12 | superio/ite/it8718f: Remove hard coding from romstage | Edward O'Callaghan |
2014-05-11 | superio/ite/*: Factor out generic romstage component | Edward O'Callaghan |
2014-05-11 | superio/ite/it8728f: RAMstage PNP configuration component | Edward O'Callaghan |
2014-05-11 | SeaBIOS: Fix cpp use | Patrick Georgi |
2014-05-10 | Arch-level Kconfig menu cleanup | Furquan Shaikh |
2014-05-10 | Replace SERIAL_CPU_INIT with PARALLEL_CPU_INIT | Kyösti Mälkki |
2014-05-10 | mainboard/jetway/nf81-t56n-lf: Toggle WDT and CIR in devicetree.cb | Edward O'Callaghan |
2014-05-10 | superio/fintek/f71869ad: Fix incorrect LDN's | Edward O'Callaghan |
2014-05-10 | baytrail: cache reference code for S3 resume | Aaron Durbin |
2014-05-10 | baytrail: allow ramstage_cache_location() usage in ramstage | Aaron Durbin |
2014-05-10 | ramstage_cache: allow ramstage usage add valid helper | Aaron Durbin |
2014-05-10 | baytrail: note S3 resume status earlier | Aaron Durbin |
2014-05-10 | baytrail: utilize reg_script_run_on_dev() | Aaron Durbin |
2014-05-10 | baytrail: initialize perf/power registers | Aaron Durbin |
2014-05-10 | baytrail: add more iosf access functions | Aaron Durbin |
2014-05-10 | baytrail: remove verbosity in iosf | Aaron Durbin |
2014-05-10 | reg_script: add reg_script_run_on_dev() | Aaron Durbin |
2014-05-10 | baytrail: Add support for LPSS and SCC devices in ACPI mode | Duncan Laurie |
2014-05-09 | cougar_canyon2: Switch CPU/NB/SB to the shared FSP code | Martin Roth |
2014-05-09 | Intel FSP: add a shared set of functions for the FSP | Martin Roth |
2014-05-09 | superio/serverengines/pilot: Avoid .c includes | Edward O'Callaghan |
2014-05-09 | Squelch some warnings from Kconfig | Kyösti Mälkki |
2014-05-09 | rambi: Enable DPTF | Duncan Laurie |
2014-05-09 | baytrail: Basic DPTF framework | Duncan Laurie |
2014-05-09 | rambi: Set panel power timings | Duncan Laurie |
2014-05-09 | baytrail: Enable panel and set timings | Duncan Laurie |
2014-05-09 | rambi: change SD card pulls to 20K | Aaron Durbin |
2014-05-09 | rambi: limit SD card controller to 2.0 spec | Aaron Durbin |
2014-05-09 | baytrail: allow SD card controller capabilities overrides | Aaron Durbin |
2014-05-09 | baytrail: fix nvs offsets | Aaron Durbin |
2014-05-09 | rambi: export SPI write-protect GPIO correctly | Aaron Durbin |
2014-05-09 | baytrail: lpe audio device needs memory for its firmware | Aaron Durbin |
2014-05-08 | ChromeOS boards: Always build code for bootmode straps | Kyösti Mälkki |
2014-05-08 | ChromeOS boards: Fix includes | Kyösti Mälkki |
2014-05-08 | Declare get_write_protect_state() without ChromeOS | Kyösti Mälkki |
2014-05-08 | Rename from save_chromeos_gpios() to init_bootmode_straps() | Kyösti Mälkki |
2014-05-08 | ChromeOS boards: Use explicit include of chromeos.c | Kyösti Mälkki |
2014-05-08 | superio/fintek/f71869ad: Make hwm devicetree configurable | Edward O'Callaghan |
2014-05-08 | superio/fintek/f71869ad: Configure multi-func reg in devicetree | Edward O'Callaghan |
2014-05-08 | mainboard/jetway/nf81-t56n-lf: Improve diags in romstage | Edward O'Callaghan |
2014-05-08 | rambi: Make ec_in_rw a legacy GPIO | Shawn Nematbakhsh |
2014-05-08 | baytrail: gpio: Make GPIO inputs MMIO by default | Shawn Nematbakhsh |
2014-05-08 | rambi: Change eMMC pin PUs to 2K | Shawn Nematbakhsh |
2014-05-08 | rambi: configure SD card signals | Aaron Durbin |
2014-05-08 | baytrail: enable lpe resources assigned to device | Aaron Durbin |
2014-05-08 | baytrail: Fix _CRS to build with new IASL | Duncan Laurie |
2014-05-08 | rambi: configure the LPE audio codec clock | Aaron Durbin |
2014-05-08 | baytrail: add lpe codec clock configuration | Aaron Durbin |
2014-05-08 | baytrail: Add ACPI code to describe GPIO controller | Duncan Laurie |
2014-05-08 | baytrail: Update to microcode 31E and fix C-state table | Duncan Laurie |
2014-05-07 | baytrail: minor style | Patrick Georgi |
2014-05-07 | rambi: Remove outdated comment | Patrick Georgi |
2014-05-07 | rambi: handle single channel configs | Aaron Durbin |
2014-05-07 | baytrail: romstage: Add config option to enable RMT | Shawn Nematbakhsh |
2014-05-07 | baytrail: pcie: Root port initialization | Aaron Durbin |
2014-05-07 | baytrail: gpio: Fix NCORE gpio-to-pad LUT | Shawn Nematbakhsh |
2014-05-07 | rambi: use SERIRQ pad as keyboard irq in gpio mode | Aaron Durbin |
2014-05-07 | rambi: make ramids non-legacy gpio inputs | Aaron Durbin |
2014-05-07 | baytrail: enable caching and prefetching in spi controller | Aaron Durbin |
2014-05-07 | baytrail: fix direct irq pad configuration | Aaron Durbin |
2014-05-07 | baytrail: ensure init_chromeos() is called in romstage | Aaron Durbin |
2014-05-07 | rambi: distribute IRQs away from PIRQA on pci devices | Aaron Durbin |
2014-05-07 | superio/common/conf_mode: Provide another common pnp entry/exit | Edward O'Callaghan |
2014-05-07 | baytrail: don't allow PCIE wake ups | Aaron Durbin |
2014-05-07 | baytrail: gpio: Make pad input/output state mutually exclusive | Shawn Nematbakhsh |
2014-05-07 | rambi: fixup settings so trackpad can be found in kernel | Aaron Durbin |
2014-05-07 | baytrail: first pass at lpss device initialization | Aaron Durbin |
2014-05-07 | reg_script: add iosf lpss port access | Aaron Durbin |
2014-05-07 | baytrail: initialize eMMC device | Aaron Durbin |
2014-05-07 | baytrail: initialize common SSC functionality | Aaron Durbin |
2014-05-07 | reg_script: add iosf paths for score, ccu, and ssc | Aaron Durbin |
2014-05-07 | baytrail: add score and ssc iosf access functions | Aaron Durbin |
2014-05-07 | rambi: Add DIRQs for trackpad and touchscreen | Shawn Nematbakhsh |
2014-05-06 | Introduce stage-specific architecture for coreboot | Furquan Shaikh |
2014-05-06 | baytrail: gpio: Add support for direct / dedicated IRQs | Shawn Nematbakhsh |
2014-05-06 | rambi: disable HDA device | Aaron Durbin |
2014-05-06 | rambi: enable SCI and SMI gpios | Aaron Durbin |
2014-05-06 | rambi: mainboard EC - SCI and SMI fixes | Aaron Durbin |
2014-05-06 | baytrail: add GPIO SMI support | Aaron Durbin |