summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2019-07-05soc/intel/cannonlake: Fix PMC and GPIO block values for PCH-HJeremy Soller
Some of the values used for GPIO_CFG and MISCCFG were not correct, causing GPEs to not work correctly. This adjusts them according to the values found in the original ACPI tables for the System76 Gazelle. Unfortunately, the Intel documentation[1] mentioned below is also incorrect. I have mentioned this to Intel already. The source for the Intel CoffeeLake FSP also confirms these new numbers. This was tested on a System76 Gazelle (gaze14). The EC uses GPP_K3 for its GPE and GPP_K6 is used for the lid switch GPE. Both function correctly after applying this change. [1] Intel Document #572235: Intel ® 300 Series Chipset Families Platform Controller Hub External Design Specification (EDS) - Volume 2 of 2 Change-Id: I4ecc9552468037598ef5d4e10122d660dcbfe71d Signed-off-by: Jeremy Soller <jeremy@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33941 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-07-05device/pci_rom.c: Fix indent for 'if' statementElyes HAOUAS
Change-Id: Ie9adb60323742d379cc4ad0af069a793b9ddd79b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33330 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-04console: Implement j specifier in vtxprintf()Jacob Garber
It is occasionally useful to print a uintmax_t or intmax_t, so add support for the j specifier. This also makes defining the PRI* macros in <inttypes.h> simpler. Change-Id: I656e3992029199b48e62a9df2d56f54c34e4e10f Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-04console: Remove support for printing extra basesJacob Garber
vtxprintf() can only print numbers in base 8, 10, and 16, so the extra letters in the alphabet aren't needed. Change-Id: I6a51c13f3298a597e801440f86bf698bdd8c736a Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-04soc/intel/common: Increase SMM_MODULE_STACK_SIZE to 0x800Kane Chen
While running the s0ix cycling test, we observed SMM Handler caused a stack overflow. This error happens during event log access. This change is to increase the SMM_MODULE_STACK size to 0x800 BUG=b:135551854 TEST=suspend_resume test pass 500+ cycles, originally issue happenes within 150 cycle Change-Id: Ib4686b4d2d4fc3976068779314f4ee15ef4a8ae2 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-07-04soc/intel: Replace uses of dev_find_slot()Kyösti Mälkki
To call dev_find_slot(0, xx) in romstage can produce invalid results since PCI bus enumeration has not been progressed yet. Replace this with method that relies on bus topology that walks the root bus only. Change-Id: I2883610059bb9fa860bba01179e7d5c58cae00e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-04device/pci_ops: Define pci_find_capability() just onceKyösti Mälkki
Wrap the simple romstage implementation to be called from ramstage. Change-Id: Iadadf3d550416850d6c37233bd4eda025f4d3960 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31755 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-04pcengines/apuX: Replace use of dev_find_slot()Kyösti Mälkki
Find the NIC device based on the PCIe root port function. Change-Id: Ia8c6e115c9b836ee60862427dfc9d46ca3dd1b69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-07-04sb/intel/common: Use correct bitwise operatorJacob Garber
Like the line above it, this should be & instead of | (otherwise it will always incorrectly return true). spi_locked() is only used internally to decide which opcodes will be used to talk to the flash, and if it is falsely reported as locked, the worst case should be a denial of service (unless there are more bugs). Change-Id: I5208b523c815d15d7263594f06ccfacd8a9510b1 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1402092 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-04lib/romstage_stack.c: Remove unused functionsArthur Heymans
Change-Id: I1e66ff3fe7462dfeae2a7ce7e3a8083cf90a15f9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33936 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-04arch/x86: Adjust size of postcar stackKyösti Mälkki
With VBOOT=y && VBOOT_MEASURED_BOOT=y message digest will be allocated from the stack and 1 KiB reserve used with the recent platforms was no longer sufficient. The comment of LZMA scratchpad consuming stack was obsolete for postcar, so these can be reduced to same 4 KiB. Change-Id: Iba1fb5bfad6946f316feac2d8c998a782142a56a Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-04drivers/intel/fsp1_1: Adjust postcar MTRRsKyösti Mälkki
Use of romstage_ram_stack_bottom() was invalid, it potentially uses a different ROMSTAGE_RAM_STACK_SIZE from the postcar_frame_init() call. If alignment evaluated to 1 MiB, that WB MTRR may not have covered all of CBMEM range, having some impact on boot speeds. There is no need to accurately describe write-back MTRR ranges for postcar. Change-Id: Icb65cef079df56fadcc292c648cab8bdbb667f47 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-07-04Revert "soc/intel/skylake/romstage: Increase size of postcar stack"Kyösti Mälkki
This reverts commit f70cb8bf968af75669325104756464ce6f4b824b. It was merged prematurely with some vague argumentation in the commit message and not all issues of reviewers were addressed. Change-Id: Ia336f3499fb29976a6b80383ef8b0f3d552f5640 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-04amdfam10: Declare get_sysinfo()Kyösti Mälkki
It's forbidden to use dereference CAR_GLOBAL variables directly. The notation fails after CAR teardown for romstage. Change-Id: I6e6285ca0f520608c2a344517fbac943aeb36d87 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33995 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-04amdfam10: Declare empty activate_spd_rom() stubKyösti Mälkki
Change-Id: I1d0940a08f7ae5901b812618a6859c4297274591 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-03soc/amd/common/lpc: Add Picasso IDMarshall Dawson
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I02e6fdcd6685e0dd3fa7872b054ebe508157a0ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/33758 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03soc/amd/common/iommu: Add Picasso IDMarshall Dawson
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Ib000e12cd568dd83b9533efe66e67878b806b3f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-07-03soc/amd/common/hda: Add Picasso IDsMarshall Dawson
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I02b279a2b625ecbdf827cb4643d772eb81ddfe70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-07-03soc/amd/picasso: Remove all PSP runtime functionsMarshall Dawson
Remove the mailbox call to notify the PSP that DRAM is ready. This is not supported on Family 17h. Remove the selectable SMU firmware. This is a feature of the PSP bootloader and the standard bootloader doesn't contain the ability. Clean up additional mentions of PSP within picasso. Change-Id: I8abeb4c375dbff3b438cd18ccaaf66e11c86e72e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-07-03soc/amd/picasso: Remove fanless SKU optionMarshall Dawson
The command line options for picasso will look different than stoneyridge. Remove the fanned/fanless distinction to simplify the makefile. Picasso will use subprograms instead of fanned/fanless SKUs. Change-Id: I50d8751e14b00ca53a6498f8e6c7f3f42543dace Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33753 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03soc/amd/picasso: Remove SD controllerMarshall Dawson
Change-Id: Ie9cf361ed0caba9c73727453c4a503557edc854d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-03soc/amd/picasso: Add xhci1 and remove ehciMarshall Dawson
Change-Id: I9d0098082c224bbf5ab2b4f0f41eb8b5b729eec7 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-03soc/amd/picasso: Remove most stoneyridge USBMarshall Dawson
Picasso doesn't implement the AcpiMmio XHCI_PM registers. Remove source that uses these. Remove USB devices from the AOAC registers. Remove the D0/D3 support from ASL, including all supporting xHCI firmware loading support. Remove xHCI firmware from amdfw.rom. Change-Id: Iae4c72c5a8e353ca8db02d04735f8d2b28441793 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-07-03soc/amd/picasso: Remove stoneyridge GECMarshall Dawson
Remove the hudson-style support for the Gigabit Ethernet Controller. Change-Id: I2124b949a866148a97d9cd6e7fd418f7de8e2216 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-07-03soc/amd/picasso: Change all remaining soc namesMarshall Dawson
Convert all remaining stoneyridge names to picasso. Change-Id: I0ed3eaa5b1d2696448ae18b62c7218de59c61883 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-07-03aopen/dxplplusu: Replace use of dev_find_slot()Kyösti Mälkki
To use fixed PCI bus numbers is always invalid. Change-Id: Ia2ffdb1f5e0ff398674a016ad4cb94f622c057ff Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-03aopen/dxplplusu: Remove PIRQ tableKyösti Mälkki
It was never tested or injected. Change-Id: I3fd82aaa11afc5adab212ec6709580b4bcc67ca3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34001 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03intel/e7505: Drop debug codeKyösti Mälkki
Only (conditionally) used part was dump_pci_device() and that was never particularly useful either. Change-Id: Iaacfa511de1ce1e0bdbd2e8a74e41d336e505670 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-03soc/intel/skylake: Add Kabylake-R microcode update filesArthur Heymans
This also corrects some CPU naming in comments. Change-Id: I8b9fc3ba0d6dc6e0001b40518aae2d26c1184dc8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34000 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03mb/google/octopus: Override DDI1 DDC SDA/SCL for Garg HDMIKevin Chiu
garg 2A2C DB: SKU ID - 1 garg HDMI DB: SKU ID - 9 garg LTE DB: SKU ID - 17 For HDMI SKU9, GPIO needs to be overriden to enable DDI1 DDC SDA/SCL. BUG=b:134912735 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I6ad8e5aa52f503121b10fe353e4bf4021aee2061 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-07-03mb/google/octopus/variants/fleex: Enable EMR function for Grob360SChris Zhou
Enable EMR Pen Stylus function for Grob360S BUG=b:135968368 BRANCH=octopus TEST=EMR function working normally with HW reworked Fleex. Change-Id: Ia220dc0d3051b79b110b4df66df108f701776478 Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33802 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03mb/google/octopus: Add custom SAR values for BlooguardTony Huang
Google project name is Bloog. Bloog is 12-inch LCD. Blooguard is 14-inch LCD so would prefer to use a different SAR values instead. Use sku-id to load the SAR values. BUG=b:135078377 BRANCH=octopus TEST=build and verify SAR load by sku-id Change-Id: Id80df28a961eb1f62714558df2b219aa552ecb97 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-07-03vboot: Use CONFIG_VBOOT_MIGRATE_WORKING_DATA on all platformsJulius Werner
When we added CONFIG_VBOOT_MIGRATE_WORKING_DATA, the idea was that on some Arm platforms the original working data buffer was in SRAM, which stays accessbile for the whole runtime of the system. There is no reason to migrate it into CBMEM on those platforms because ramstage and the payload could continue to access it in SRAM. Now that we've had a couple of months of experience with this option, we found that most of our Arm platforms have some issue that requires migrating anyway, because BL31 often claims SRAM for itself and makes it inaccessible to the payload. On the remaining platforms, accessing SRAM from the payload is possible but still an issue, because libpayload doesn't have enough memory layout information to set up proper page tables for it, so we're accessing it uncached and at risk of alignment errors. Rather than having to figure out how to map the right SRAM range for every platform in the payload, let's just get rid of the option. memcpy()ing 12KB isn't worth this much hassle. Change-Id: I1b94e01c998f723c8950be4d12cc8f02b363a1bf Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-07-02sdm845: Update macro definition in CB clock driverAkash Asthana
Use literals KHz & MHz for kilohertz and megahertz frequency usages in macro definition. Change-Id: If1ca6e5e7b0603f93f3c980cc85af470fdcd54ba Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-02arch/x86: Fix spelling error in BERT commentMarshall Dawson
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I57c0bcfbe0d96aac106f771e8efb3bd471302c25 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33965 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02cpu/amd/msr: Clarify MMIO_CONF shift valueMarshall Dawson
MMIO_BUS_RANGE_SHIFT is a numerical value and not a bit field. Change it to simply 2. Otherwise its usage winds up evaluating to BusRange << (1 << 1). Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I2a6ecfc9fbfd45f69194b8daef43ff84a1dfd5fc Reviewed-on: https://review.coreboot.org/c/coreboot/+/33942 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-02arch/riscv: Make RISCV specific options depend on ARCH_RISCVArthur Heymans
Also don't define the default as this results in spurious lines in the .config. The only difference in the generated config.h is that for most board ARCH_RISCV_M goes from 1 to 0. This should not matter. Change-Id: I3e8c1cc5696d621e243696a3b5e34f62ab69a688 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31311 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02drivers/pc80/rtc/mc146818rtc_boot: Use size_t for lengthElyes HAOUAS
Change-Id: I877e19c014759e33b9cc48ff9ee27e898737aece Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-02src: Use CRx_TYPE type for CRxElyes HAOUAS
Change-Id: If50d9218119d5446d0ce98b8a9297b23bae65c72 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33816 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02soc/intel/cannonlake: Add support to log XHCI wake eventsPaul Fagerburg
Enhance elog wake source information with more details about which USB port resulted in a wake from S3 or S0ix. BUG=b:123429132 BRANCH=none TEST=``FW_NAME=hatch emerge-hatch chromeos-ec depthcharge vboot_reference libpayload coreboot-private-files intel-cmlfsp coreboot-private-files-hatch coreboot chromeos-bootimage`` Ensure /build/hatch/firmware/image-hatch.serial.bin has been built. Plug a keyboard into a USB port on the DUT. Switch the DUT to the console (Ctrl-Alt-F2, or use the AP console via servo). On the console, run ``powerd_dbus_suspend``. Wait for the DUT to enter low power mode. Verify low power mode by issuing the ``powerinfo`` command on the EC console (via servo). Expect to see ``power state 4 = S0ix``. Press a key on the USB keyboard. The DUT wakes up. On the console, run ``mosys eventlog list`` and look for the wake source. 156 | 2019-06-26 09:46:07 | S0ix Enter 157 | 2019-06-26 12:14:05 | S0ix Exit 158 | 2019-06-26 12:14:05 | Wake Source | Internal PME | 0 159 | 2019-06-26 12:14:05 | Wake Source | GPE # | 109 Program image-hatch.serial.bin into the DUT using flashrom. Repeat the ``powerd_dbus_suspend``, ``powerinfo``, ``mosys eventlog list`` sequence. 12 | 2019-06-26 14:52:23 | S0ix Enter 13 | 2019-06-26 14:53:07 | S0ix Exit 14 | 2019-06-26 14:53:07 | Wake Source | PME - XHCI (USB 2.0 port) | 3 15 | 2019-06-26 14:53:07 | Wake Source | GPE # | 109 Change-Id: Ie9ef870e219733dea9806c766f5351db25689b32 Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-07-02arch/x86: Fix cpu_cpuid_extended_level() return typeElyes HAOUAS
`cpuid_eax()` returns an unsigned integer. Change-Id: Iebb6501130bc9ae333d45ae9d2e10c918245a6d1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-02mb/google/hatch: Set trackpad irq and wake to GPP_A21Shelley Chen
Previously, We had to use GPP_A21 for trackpad wake and GPP_D21 for trackpad interrupts due to ITSS not honoring the INVERT config. Now that's fixed, we can configure trackpad wake and interrupts on GPP_A21 only. BUG=b:130436471 BRANCH=None TEST=1. boot a hatch device and make sure we can move the cursor with the trackpad 2. Run powerd_dbus_suspend and wake by clicking on the trackpad and ensure through "mosys eventlog list" that the wake source is the trackpad.\ 3. Run "echo mem > /sys/power/state", wait until device goes into S3, click trackpad to ensure device wakes. Change-Id: I26a99206c42ba442f91ae577b98366fc2fd6c0ca Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-02mb/google/hatch: Add INVERT to all IOAPIC padsShelley Chen
Now that ITSS config is fixed, we can set the IOAPIC pad configs correctly. BUG=b:123967687 BRANCH=None TEST=Make sure Hatch is booting and tested out trackpad to make sure can move cursor and wake by clicking on the trackpad after running powerd_dbus_suspend. Change-Id: I0b125996338b6f16e03b7ca184f6337c696a5f64 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33819 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02soc/amd: Add picasso to KconfigMarshall Dawson
Change-Id: I7031b07ae105a14be3c5d4e52ecc1364956fd845 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33750 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02soc/amd/picasso: Stub out bootblockMartin Roth
Remove all Picasso bootblock support. CAR is not a supportable feature, and the first code executed at the reset vector will be a hybrid romstage. Details for this implementation may be found in Documentation/soc/amd/picasso/family17h.md. TEST=None BUG=b:130804851 Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I8edf45c02dc5bfcdca03abf1294db4be508682cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/32413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-02soc/amd/picasso: Update stoney paths to picassoMartin Roth
Update paths. There are still a few paths in Kconfig relating to PSP and the firmware directory table. Those will be updated in a follow-on commit. TEST=None BUG=b:130804851 Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I18f3d80dbeabd754ebcee6593864fd613fc2ef7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/32412 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02soc/amd/picasso: Rename makefile.inc back to Makefile.incMartin Roth
Now that the Makefile is updated, we can change the name back without it affecting the Stoney build. TEST=None BUG=b:130804851 Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I18ee48865fb64265f38179560265827783d50820 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-02soc/amd/picasso: Change SOC_AMD_STONEY* to SOC_AMD_PICASSOMartin Roth
TEST=None BUG=b:130804851 Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ie466bc39ed6aa9d2a8651bd9290090b83cd97d74 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32410 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02soc/amd/picasso: Change header guards from stoney to picassoMartin Roth
TEST=None BUG=b:130804851 Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I32b7dbeae7538884311ccfc3a0e8db63c48fe356 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-02soc/amd/picasso: Remove ST files not used for PCOMartin Roth
Remove files that aren't needed for the picasso port. Remove traces of AGESA v5 (includes binaryPI support files). Remove SPD helper. Picasso (and all AMD Family 17h processors) have a very different boot flow from previous products. Memory is initialized by the PSP before the x86 processor is released from reset. The SPD is read by the PSP, so it's not needed in coreboot. TEST=None BUG=b:130804851 Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I743ffd6058982f8f182ea4d73172a029967f3ea5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32408 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-07-02soc/amd/picasso: Create picasso as a copy of stoneyridgeMartin Roth
So that everyone can see what's being updated from stoney, we're starting with a direct copy of the stoney directory. There are arguments both for and against doing it this way, but I believe This the most transparent way. We've moved much of the duplicated stoney code into the soc/amd/common directory and will continue that work as it becomes obvious that we have unchanged code between the SOCs. Makefile.inc has been renamed as makefile.inc so that it won't build in jenkins until the directory is updated. Other than that change, this is an exact copy of the stoneyridge SOC directory which will be updated in the follow-on commits in the patch train. TEST=None BUG=b:130804851 Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I6809bd1eea304f76dd9000c079b3ed09f94dbd3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/32407 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02mb/google/reef/variants/: fix Samsung K4F6E3S4HM-MGCJ densityKevin Chiu
Samsung K4F6E3S4HM-MGCJ density is 16Gb BUG=b:121228792 BRANCH=master TEST=emerge-snappy coreboot chromeos-bootimage MemTotal: 8041964kB in /proc/meminfo Change-Id: Ie8ecd82b92d4e82d3955cf773febca30f6280a5e Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-02device/pci_rom: Fix redundant pci_rom_probe() callsKyösti Mälkki
For the PCI_VENDOR_ID_ATI case, we can rely on pci_rom_acpi_fill_vfct() to make the call if necessary. For hardware other than ATI, pci_rom_probe() was already called from pci_rom_ssdt() and pci_dev_init(), so PCI_ROM_ADDRESS BAR is already enabled, if requested so. Change-Id: I0ea893a9ac7ba480840ebf5570d8fe0d9e20938f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2019-07-02device/pci_rom: Fix on-board optionrom addressKyösti Mälkki
The function pci_rom_probe() may be called multiple times for a device. For cases where CBFS does not contain optionrom file, only the first time probing for the on-board ROM chip worked. PCI_ROM_ADDRESS_ENABLE is set on the first run. Mask out all the reserved bits of PCI_ROM_ADDRESS register to get correct physical address for rom_header. Change-Id: I14374954af09201494bf2f13e5a6e4dc640c05ee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2019-07-02security/memory: Clear memory in ramstagePatrick Rudolph
* Add architecture independend way of clearing all DRAM * Implemented in ramstage as MTRRs need to be set to speed up clearing. Takes up to 15 seconds per GiB otherwise. * Use memset_pae on x86 * Add quirks for FSP1.0 Tested on P8H61M-Pro: * Clears 4GiB in less than 1 second Tested on wedge100s: * Clears 8GiB in 2 seconds Change-Id: Idaadb8fb438e5b95557c0f65a14534e8762fde20 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31550 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02cpu/x86/pae/pgtbl: Add memset with PAEPatrick Rudolph
To clear all DRAM on x86_32, add a new method that uses PAE to access more than 32bit of address space. Add Documentation as well. Required for clearing all system memory as part of security API. Tested on wedge100s: Takes less than 2 seconds to clear 8GiB of DRAM. Tested on P8H61M-Pro: Takes less than 1 second to clear 4GiB of DRAM. Change-Id: I00f7ecf87b5c9227a9d58a0b61eecc38007e1a57 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31549 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02soc/intel/icelake: Disable HDA based on devicetreeSubrata Banik
Change-Id: I28c2beca4bc26ddb896e68886571ebdc82276b48 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-02QC common: fix compiler complaint, missing <string.h>T Michael Turney
Change-Id: I5b5b7bc61dd82fb1b866857d60926b057fae3715 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33445 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-01mb/up/squared: Add kernel cmdline parametersFelix Singer
Since ttyS0 isn't used for UART0, configure ttyS4 as default Change-Id: Ia0469226253b08328807d5401c05633296e43d22 Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33785 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-01Use 3rdparty/intel-microcodeArthur Heymans
Instead of maintaining this in 3rdparty/blobs use the 3rdparty/intel-microcode which is maintained by Intel. This allows for some finegrained control where family+model span multiple targets. Microcode updates present in 3rdparty/blobs/soc/intel/{baytrail,broadwell} are left out since those contain updates not present in the Intel repo. Those are presumably early CPU samples that did not end up in products. The following MCU are get a new revision: old: sig 0x000306c3, pf_mask 0x32, 2018-04-02, rev 0x0025, size 23552 sig 0x00040651, pf_mask 0x72, 2018-04-02, rev 0x0024, size 22528 sig 0x000206a7, pf_mask 0x12, 2018-04-10, rev 0x002e, size 12288 sig 0x000306a9, pf_mask 0x12, 2018-04-10, rev 0x0020, size 13312 sig 0x000706a1, pf_mask 0x01, 2018-05-22, rev 0x0028, size 73728 sig 0x000506c9, pf_mask 0x03, 2018-05-11, rev 0x0032, size 16384 sig 0x000506ca, pf_mask 0x03, 2018-05-11, rev 0x000c, size 14336 sig 0x000806e9, pf_mask 0xc0, 2018-03-24, rev 0x008e, size 98304 sig 0x000906e9, pf_mask 0x2a, 2018-03-24, rev 0x008e, size 98304 sig 0x000906ea, pf_mask 0x22, 2018-05-02, rev 0x0096, size 97280 sig 0x000906eb, pf_mask 0x02, 2018-03-24, rev 0x008e, size 98304 sig 0x00050665, pf_mask 0x10, 2018-04-20, rev 0xe00000a, size 18432 sig 0x000506e3, pf_mask 0x36, 2018-04-17, rev 0x00c6, size 99328 sig 0x000906e9, pf_mask 0x2a, 2018-03-24, rev 0x008e, size 98304 sig 0x000406e3, pf_mask 0xc0, 2018-04-17, rev 0x00c6, size 99328 new: sig 0x000306c3, pf_mask 0x32, 2019-02-26, rev 0x0027, size 23552 sig 0x00040651, pf_mask 0x72, 2019-02-26, rev 0x0025, size 21504 sig 0x000206a7, pf_mask 0x12, 2019-02-17, rev 0x002f, size 12288 sig 0x000306a9, pf_mask 0x12, 2019-02-13, rev 0x0021, size 14336 sig 0x000706a1, pf_mask 0x01, 2019-01-02, rev 0x002e, size 73728 sig 0x000506c9, pf_mask 0x03, 2019-01-15, rev 0x0038, size 17408 sig 0x000506ca, pf_mask 0x03, 2019-03-01, rev 0x0016, size 15360 sig 0x000806e9, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906ea, pf_mask 0x22, 2019-04-01, rev 0x00b4, size 98304 sig 0x000906eb, pf_mask 0x02, 2019-04-01, rev 0x00b4, size 99328 sig 0x00050665, pf_mask 0x10, 2019-03-23, rev 0xe00000d, size 19456 sig 0x000506e3, pf_mask 0x36, 2019-04-01, rev 0x00cc, size 100352 sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328 sig 0x000406e3, pf_mask 0xc0, 2019-04-01, rev 0x00cc, size 100352 Change-Id: Idcfb3c3c774e0b47637e1b5308c28002aa044f1c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-01security/tpm/tss/tcg-2.0/tss.c: Add debug message to tlcl_lib_init()Frans Hendriks
No message is reported in tlcl_lib_init() when tis_init() or tis_open() returned an error value. Add debug string. BUG=N/A TEST=Build binary and verified logging on Facebook FBG-1701 Change-Id: I522e488ddd3a1bd94a1a8c8470c757bd79c6d5c5 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-07-01intel/fsp_rangeley: Use fixed FSB/BCLK value 100 MHzKyösti Mälkki
Prior to commit d731a24 src/cpu/intel: Set get_ia32_fsb function common value of 200 was silently used as a default for fsp_rangeley (model_406dx) in cpu/x86/lapic/apic_timer:set_timer_fsb(). After the commit, get_ia32_fsb() returns -2, eventually resulting with divide-by-zero in timer_monotonic_get(), as get_timer_fsb() returns 0. Add Rangeley CPUID model 0x4d to get_ia32_fsb() as a fix, using BCLK = 100 MHz based on the comments in northbridge/intel/fsp_rangeley/udelay.c Change-Id: I306f85dba9b1e91539fc0ecc9b2ae9d54f82be6c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-01Kconfig: Enable RAMPAYLOAD for x86Subrata Banik
This patch makes CONFIG_RAMPAYLOAD default enable upon selection of HAVE_RAMPAYLOAD kconfig from mainboard for x86 platform. Without this CL, CONFIG_RAMPAYLOAD is still disabled although mainboard has selected CONFIG_HAVE_RAMPAYLOAD. Change-Id: I40308bbf970a0dbe5f7e2086ed8a7a70c2a3a32c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33859 Reviewed-by: ron minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-30pci_ids.h: Add AMD Picasso IDsMarshall Dawson
Change-Id: I4ac67d1577229e63424dd7fd0ff84d1acfe826c3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33748 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-06-28sb/amd/sb{700,800}: Clean up index manipulationsJacob Garber
It looks like in days gone by that these switches were once parts of loops that incremented 'index' as they went along. However, we don't have any loops anymore, so remove the needless increments and streamline the rest of the assignments. Change-Id: Iaabee984333c273af7810f9c11ed26bbb2a995d1 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: scan-build 8.0.0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-06-28device: Tidy up add_more_links()Jacob Garber
- Add documentation comment - Use 'unsigned int' to make checkpatch happy - Return early if no more links need to be added - Add error handling if malloc fails - Clean up whitespace Change-Id: I70976ee2539b058721d0ae3c15edf279253cd9b7 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1229634 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33238 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-28device,nb/amd: Deduplicate add_more_links()Jacob Garber
This function is duplicated in many AMD northbridge files, and all the definitions have started to diverge somewhat. This moves a single copy into device utils and deletes the rest. The function definition from nb/amd/amdfam10 was chosen to be kept, since it contains several fixes from commit 59d609217b (AMD fam10: Fix add_more_links) that the others don't have. For the ease of diffing, the checkpatch lints and other small cleanups will be done in a follow-up patch. Change-Id: I5ea73126092449db3f18e19ac0660439313072de Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33237 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-28nb/intel/pineview: Remove unused codeJacob Garber
All the clocks are switched on anyway, so this series of if statements isn't needed. Change-Id: I654043fd6736caa6890fd697015c577ddaa7cd41 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 13473{27-30} Reviewed-on: https://review.coreboot.org/c/coreboot/+/33408 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-28device/dram: Inline value into print statementJacob Garber
By default printram() expands to nothing in normal builds, and so scan-build thinks that the assignment to reg8 is unused. Inline the value of reg8 into the print statement to silence the warning. Change-Id: I921fe08949c4135367bee9646b3b365097fab19e Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: scan-build 8.0.0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-28cpu/amd/family_10h-family_15h: Remove dead assignmentJacob Garber
Pstate_num is initialized later when it is used as a loop index, so this duplicate assignment can be removed. Change-Id: I71429bd3306139a823ed39e751d779e4d874f657 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: scan-build 8.0.0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-28sb/amd/rs780: Remove dead assignmentJacob Garber
We return immediately after, so this assignment can be removed. Change-Id: I2a317ada0132a40b623402055b3b995bde80ddf5 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: scan-build 8.0.0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-28{soc,northbridge}/Kconfig: Remove unused CACHE_MRC_SIZE_KBElyes HAOUAS
Change-Id: Ie922832bc7641a44a53c0cda8d808579c66420b5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-28soc/intel/cannonlake: fix use of legacy 8254 timerMatt DeVillier
FSP sets the use of the 8254 timer via the Enable8254ClockGating UPD, which defaults to enabled, overriding what is set by coreboot. Per the FSP integration guide, this UPD needs to be disabled when a legacy OS is booted (ie, when SeaBIOS is used as the payload). Add a Kconfig option to set the UPD properly based on payload selection, and remove the existing coreboot code in lpc.c since it is either ineffective or being overridden by FSP. Test: build/boot out-of-tree WHL board with both SeaBIOS and Tianocore, ensure 8254 timer usage set correctly for each. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I0e888bf754cb72093f14fc02f39bddcd6d288203 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33512 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-28asus/am1i-a: Enable UART according to CONFIG_UART_FOR_CONSOLEMike Banon
It has been observed by me and Elisenda Cuadros / Gergely Kiss [1] that the boot process of this board is super slow when UART 0 is being used - even if nothing is connected to it. Enable UART according to CONFIG_UART_FOR_CONSOLE - and, if UART 0 is selected, it will be initialized at romstage and this problem will not happen. [1] https://mail.coreboot.org/pipermail/coreboot/2018-February/086132.html Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I6579aa8fd092da84f8afdcc33496db45c582919f Reviewed-on: https://review.coreboot.org/c/coreboot/+/33796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-06-28mb/google/kohaku: Correct trackpad i2c addressSeunghwan Kim
Correct i2c address of trackpad. It should be 0x20. BUG=None BRANCH=None TEST=Verified trackpad works on pre-evt system Change-Id: I7ded21ce8ff9e907e436777a27edb4273512011d Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-06-28lib/gnat: Enable -WerrorNico Huber
We want to catch warnings as early as possible. Change-Id: Ifdb2ff8f7973d557a437ac127e073306f76ca6f6 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33848 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-28lib/gnat: Use ADAFLAGS instead of CFLAGSNico Huber
Commit 6d7564cdfe (Move -Wlogical-op into xcompile) introduced GCC_ADAFLAGS_<arch> but forgot to use them for libgnat. Fix that. Change-Id: Ia9079f01bb3c2a08296a3d3cc32fdf4ae5bb60c7 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33847 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-28mb/emulation/qemu-riscv: Use generic 8250 uart driverPatrick Rudolph
Drop hacked uart code and use the generic 8250 uart driver for ns16550a. Tested on qemu-system-riscv64: * The UART is still working. Change-Id: I6efda913fa39e0cfa466b52c570572aca90dacdf Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33735 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Philipp Hug <philipp@hug.cx> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-28arch/riscv/mcall: Drop debug codePatrick Rudolph
The printk has no effect as console_init() hasn't been called. Also drop unused variables and headers. Change-Id: I5bf5a8822c69bbcc3de1de460d19585b8330649f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Philipp Hug <philipp@hug.cx>
2019-06-28qualcomm: qclib: Ensure interface table entry name is terminatedJulius Werner
This string is printed in dump_te_table() so we should make sure it's properly null-terminated. This fixes Coverity issue 1401305. Change-Id: I45827f552c2d8a4e01b50a699ac88ee457043282 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-06-27mainboard: Add support for ASUS P8Z77-M PRO desktop mainboardVlado Cibic
Add support for ASUS P8Z77-M PRO desktop mainboard Working: - Tianocore and SeaBIOS boot - PS/2 keyboard and mouse - Audio - S3 Suspend, shutdown and reboot - USB2 / USB3 - Gigabit Ethernet - SATA3, SATA2 and eSATA - NVME - CPU Temp sensors - TPM - Native raminit and also MRC - PCIe GPU in all PCIe slots (16x/8x/4x) (linux) - Integrated graphics with both libgfxinit and Intel Video OpROM (all connectors VGA/DVI-D/HDMI) Signed-off-by: Vlado Cibic <vladocb@protonmail.com> Change-Id: I47d24ac8b236f929c3160f9a769b971d83710f9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/33328 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-27mb/upsquared: Align partitions to 4KiBFelix Singer
This fixes warnings while booting coreboot. Change-Id: If1e99b74ded5f743a3ad4fc829ae9747276c483a Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33784 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-27mb/asrock/h110m: set serirq_mode to continuous modeMaxim Polyakov
By default, the LPC SIRQ mode is set to Quiet mode. Therefore, COM-port from the SurerIO chip don't work correctly after the LPC controller (PCI 0:1f.0) initialization. Console output is broken. The patch fixes this bug by overriding the serirq_mode option in the devicetree.cb to set Continuous SIRQ mode Change-Id: I37e26b271fb61f6c0343d6bf65c029924df82caf Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33801 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-27drivers/pc80/tpm: add support for TPM emulator SwTPM 2.0 moduleTsung Ho Wu
Add software TPM 2.0 emulator to tpm device probe list. SwTPM: https://github.com/stefanberger/swtpm Tested on qemu q35 with MAINBOARD_HAS_LPC_TPM and MAINBOARD_HAS_TPM2 set in qemu-q35 Kconfig. Qemu: see qemu flags at https://s3hh.wordpress.com/2018/06/03/tpm-2-0-in-qemu/ How to see it work. Ubuntu 18.04: 1. Install SwTPM from https://github.com/stefanberger/swtpm 2. Add MAINBOARD_HAS_LPC_TPM and MAINBOARD_HAS_TPM2 to src/mainboard/emulation/qemu-q35/Kconfig and rebuild coreboot.rom 3. mkdir -p swtpm0 4. swtpm socket --tpmstate dir=swtpm0 --tpm2 --ctrl \ type=unixio,path=swtpm0/swtpm-sock --log level=20 & 5. qemu-system-x86_64 -machine q35 -m 2G \ -chardev socket,id=chrtpm,path=swtpm0/swtpm-sock \ -tpmdev emulator,id=tpm0,chardev=chrtpm -device \ tpm-tis,tpmdev=tpm0 -pflash build/coreboot.rom \ -serial $(tty) -display none 6. Check boot log and search 'Found TPM'. Change-Id: I5f58d2c117afbd057bb91697912db826db1d67a1 Signed-off-by: Tsung Ho Wu <tsungho.wu@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33302 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-27security: Add memory subfolderPatrick Rudolph
Add files to introduce a memory clearing framework. Introduce Kconfig PLATFORM_HAS_DRAM_CLEAR that is to be selected by platforms, that are able to clear all DRAM. Introduce Kconfig SECURITY_CLEAR_DRAM_ON_REGULAR_BOOT that is user selectable to always clear DRAM on non S3 boot. The function security_clear_dram_request tells the calling platform when to wipe all DRAM. Will be extended by TEE frameworks. Add Documentation for the new security API. Change-Id: Ifba25bfdd1057049f5cbae8968501bd9be487110 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2019-06-27vboot: remove vboot_handoff stepJoel Kitching
Depthcharge no longer reads this data structure, and uses the vboot workbuf in vboot_working_data instead. Since vboot2 downstream migration is not yet completed, the vboot2 -> vboot1 migration code is still required, but has been relocated to depthcharge. BUG=b:124141368, b:124192753 TEST=make clean && make runtests BRANCH=none Change-Id: I769abbff79695b38d11fb6a93c2b42f64d4bafde Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33535 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-26mb/google/hatch: Add a GPIO to enable/disable FPMCU powerPhilip Chen
A FPMCU power-control pin (GPP_C11) is added to the latest hatch reference schematic. Even though this is not implemented in hatch rev1 board, the future hatch family boards with FPMCU should all have this control pin. On the old boards without this control pin, GPP_C11 is a floating TP, and thus this patch should be backward-compatible. BUG=b:130307667, b:135216932 TEST=build Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: I6a84eeb6aab562258e749a8a5d09dadfa0e43587 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-26mb/google/hatch: Remove pulls on NC padsFurquan Shaikh
There is no need to add internal termination (PU/PD) on the not-connected pads. This change gets rid of the terminations on the NC pads. Change-Id: I3df538d7127e5ef75e6e6ff9db3524e26f0450ed Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-06-26mb/google/hatch/variants/baseboard: Update PL2 power limit valueSumeet Pawnikar
Update PL2 power limit value from 44W to 64W. BUG=None BRANCH=None TEST=Build and Boot hatch EVT Change-Id: I3f4b5ab8bf0ce9464c322c148843f5a3e8d706d9 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-06-26soc/intel/cannonlake/Kconfig: Don't have all variants select ↵Arthur Heymans
SOC_INTEL_CANNONLAKE This allows to use Kconfig options to differentiate between SOC variants. Change-Id: Ica11c68377e3d0dc8a8f48198e01a74d7bebe642 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33559 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-26mb/up/squared: Remove unnecessary codeFelix Singer
This patch removes unnecessary code which configures default FSP values. Change-Id: If7dae4f24a9fcb01d2d47063dd3a0f4ce6c120d2 Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-25atlas: enable GEO_SARCaveh Jalali
BUG=b:131634035 BRANCH=none TEST=verified SAR data shows up in ACPI SSDT table. Change-Id: I65ef59c9616b1cae3fa4c4b18bbfe4ed098d2891 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-25intel/945 boards: Use smp_write_pci_intsrc()Kyösti Mälkki
Radically reduces line lengths and splits '(bus<<2) | INT' to separate parameters. Change-Id: I0cfd714da3d2773affdb34d1dab2ac32879e2cfd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30740 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-25soc/intel/dnv: Fix value of B_PCH_GPIO_RX_SCI_ROUTEPatrick Havelange
The value for that macro should be 1<<19. This is confirmed by the Intel doc and also by N_PCH_GPIO_RX_SCI_ROUTE. See Intel Atom® Processor C3000 Product Family Datasheet (February 2018) : https://www.intel.com/content/www/us/en/products/docs/processors/atom/c-series/c3000-family-datasheet.html Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com> Change-Id: I808d9131032a9796d837e00ad6fb3369b792e597 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33573 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Guckian Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-25mainboard/facebook/fbg1701: Set CBFS_SIZE to 0x600000Frans Hendriks
CBFS_SIZE equals size of whole SPI device. The descriptor and ME need to be placed in bottom part. Reduce the CBFS_SIZE to maximum avalaible size. BUG=N/A TEST=Boot Embedded Linux 4.20 on Facebook FBG-1701 Change-Id: Iecfae4573100c6787b6e8b1c4f2583a7fb3d95a3 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-06-25mainboard/facebook/fbg1701: Use LCD Panel type for name of tablesFrans Hendriks
tc348860_table contains the eDP to MIPI Bridge controller type. b101uan08_table used the LCD Panel type. Use LCD Panel type for name of tables. Remove the incomplete resolution comments and specify the resolution at the start of the table to 1200x1920. BUG=N/A TEST=Config eDP and verify LCD panels are working on Facebook FBG-1701 Change-Id: Ic152ea1f95f155ab76638b57a259d37ce6f43037 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33736 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-25mb/lenovo/z61t: Remove `fn_ctrl_swap` optionPeter Lemenkov
It seems that the EC on t60/x60/z61t doesn't support it. This wasn't even introduced in z61t so let's remove the remaining bits. This commit follows up on commit a5fcc2e4 with Change-Id Id2964002406a5fcf992f0ffc3627e3f66a2bb13f ("mb/lenovo/x60/t60: Remove `fn_ctrl_swap` option"). Tested on a real hardware. Change-Id: Ifd5e7823af305cc4a0194ee2097a749e43680c55 Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Andrey Korolyov <andrey@xdel.ru>
2019-06-24add ctype.h headerJoel Kitching
Sometimes coreboot needs to compile external code (e.g. vboot_reference) using its own set of system header files. When these headers don't line up with C Standard Library, it causes problems. Create ctype.h header file. Relocate ctype.h functions from string.h into ctype.h. Update source files which call ctype.h functions accordingly. Note that ctype.h still lacks five functions which are not used in coreboot source: isalnum, isalpha, iscntrl, isgraph, ispunct BUG=b:124141368 TEST=make clean && make test-abuild BRANCH=none Change-Id: I31b5e8af49956ec024a392a73c3c9024b9a9c194 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-24mb/gigabyte/ga-h61ma-d3v: Add new mainboard as variantAngel Pons
Tested with SeaBIOS as a payload, booting Arch Linux with a Linux kernel. The new code is based on autoport and the existing GA-H61M-S2PV code. The GA-H61M-S2PV has been boot-tested too, it still boots. Working: - S3 suspend/resume - USB ports and headers (Intel USB2 and EtronTech USB3) - Gigabit Ethernet - Integrated DVI/VGA graphics (libgfxinit) - PCIe x16 graphics - PCIe x1 ports - PS/2 port with a keyboard - SATA controllers (Intel SATA2 and Marvell SATA3) - User-space fan control (fancontrol on Linux) - Native raminit (4+4GB DDR3-1333) - flashrom, using the internal programmer. Tested with coreboot, as well as with the vendor firmware. Backup chip is untested. Untested: - VGA BIOS for integrated graphics init - Audio: Only front/read outputs has been tested. - Non-Linux OSes - ACPI thermal zone and OS-independent fan control Not working: - Default IFD defines the BIOS region as the entire flash chip. Using 'flashrom --ifd -i bios' is asking for a failed flash! Change-Id: I37928de158bb8fbb47fbda5d1ccd4efba7edab26 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-24cbfstool: Drop update-fit optionPatrick Rudolph
The ifittool is used instead. Drop old code. Change-Id: I70fec5fef9ffd1ba3049badb398783f31aefb02f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 12:17:00 +0000