summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Expand)Author
2010-04-25drop "arch/asm.h" and "arch/intel.h" and create "cpu/x86/post_code.h"Stefan Reinauer
2010-04-25Fix the the build of r5494 on Asus A8V-E SE. The K8M890 and K8T890Rudolf Marek
2010-04-25try to unify timing initialization across those boards that need it...Stefan Reinauer
2010-04-25Only do complete VGA init if a VGABIOS was found and installed.Patrick Georgi
2010-04-25Following patch changes the K8M890 VGA handling. It reverts the framebuffer sizeRudolf Marek
2010-04-25no warnings days.Stefan Reinauer
2010-04-25zero warnings daysStefan Reinauer
2010-04-25Trivial. The comment also need to modify.Zheng Bao
2010-04-25The device number of SATA SB700 is 0x11, while the one of SB600 is 0x12.Zheng Bao
2010-04-24these cpus are explicitly supported by model_6bxStefan Reinauer
2010-04-24drop all duplicate copies of vgabios.c in favorStefan Reinauer
2010-04-24Trivial. Fix a space to tab.Zheng Bao
2010-04-23Attached patch adds support for tinybootblock on VT8237* to decode whole flashRudolf Marek
2010-04-23zero warnings days...Stefan Reinauer
2010-04-23AMD Tilapia board support as a demonstration of an AMD Fam10 DDR3 board.Zheng Bao
2010-04-23AMD Socket ASB2 and AM3 support.Zheng Bao
2010-04-23DDR3 support for AMD Fam10.Zheng Bao
2010-04-23Make USE_OPTION_TABLE user visible, so it can be edited.Patrick Georgi
2010-04-22Fix AHCI mode on i82801gx. Fixes SATA hotplug on iBASE:MB899.Bernhard M. Wiedermann
2010-04-22via epia-m now works with default x86.c instead of its own copy of vgabios.c.Stefan Reinauer
2010-04-22zero warnings days...Stefan Reinauer
2010-04-22None of the cs5536 settings in devicetree.cb were ever used and nobody noticed.Stefan Reinauer
2010-04-22fix compilation remaining geode boardsStefan Reinauer
2010-04-22fix ARRAY_SIZE issue.Stefan Reinauer
2010-04-21oops, sorry for the last commit. This commit changes the code to distinguishStefan Reinauer
2010-04-21Move the prototype for run_vsa.Myles Watson
2010-04-21* clean up all but two warnings on artecgroup dbe61Stefan Reinauer
2010-04-20Make VSA code selectable in KconfigStefan Reinauer
2010-04-20fix artecgroup dbe61Stefan Reinauer
2010-04-20Make RAM init on i945GC workPatrick Georgi
2010-04-20cosmetics.Stefan Reinauer
2010-04-20- move src/arch/i386/smp/ioapic.c to src/arch/i386/lib/ioapic.c (hasStefan Reinauer
2010-04-20As Myles suggested a while back: Switch long time #warnings to be commentsStefan Reinauer
2010-04-19Add support for the Nokia IP530.Marc Bertens
2010-04-19- Make abuild -sb work againPatrick Georgi
2010-04-17This piece of code was somehow lost in the switch to Kconfig, and re-activatesStefan Reinauer
2010-04-16Don't use $(ROMCC) as dependency (due to ccache and scanbuild supportPatrick Georgi
2010-04-16Build utils into their source directory equivalent inPatrick Georgi
2010-04-16Fix a typo to remove a few more warnings.Myles Watson
2010-04-16fix romcc compiled i3100 boards.Stefan Reinauer
2010-04-16fix up sb600 and it8712f tree.Stefan Reinauer
2010-04-16zero warnings days: unify mp tables. fix warnings.Stefan Reinauer
2010-04-15remove more warnings. move ROOT_COMPLEX selection to fam10Stefan Reinauer
2010-04-15Avoid two conflicting invocations of build_opt_tblPatrick Georgi
2010-04-15Myles suspected this hangs certain machines, so back it out.Stefan Reinauer
2010-04-15don't leave VGA disabled by default on thomson ip1000Stefan Reinauer
2010-04-15zero warnings days...Stefan Reinauer
2010-04-15the dump function assumed that the mbi data comes right after the header.Stefan Reinauer
2010-04-15Remove a few more warnings from fam10.Myles Watson
2010-04-14get rid of this nerving crt0.d stuff Stefan Reinauer
2010-04-14fix COM2 resource bug in fintek f71805f driver.Stefan Reinauer
2010-04-14zero warning days. Move RAMTOP and RAMBASE together.Stefan Reinauer
2010-04-14fix a case where the fam10 code would overwrite parts of a struct.Stefan Reinauer
2010-04-14drop setup_ics code that was blatantly copied from cx700 and Stefan Reinauer
2010-04-14Remove few more warnings and some dead code.Myles Watson
2010-04-14geeesh! And this really compiles and even runs?Stefan Reinauer
2010-04-14HWHoleSz must be u32...Stefan Reinauer
2010-04-14udelay_tsc does not exist in the whole tree.Stefan Reinauer
2010-04-14drop quite a lot of dead code that did nothing but produce warnings and makeStefan Reinauer
2010-04-14zero warnings days. Down to under 600 different warnings Stefan Reinauer
2010-04-14fix digitallogic adl855pc compilation (and clean up the warnings while at it)Stefan Reinauer
2010-04-14move cpu/x86/car to cpu/intel/car as previously discussed on the mailing list.Stefan Reinauer
2010-04-13ip1000: fix seabios start, fix flash gpio detectionStefan Reinauer
2010-04-13fix a trivial warning when yabel with direct hw access is enabled.Stefan Reinauer
2010-04-13fix timer choice in Kconfig. HAVE_INIT_TIMER is selected correctly, no need toStefan Reinauer
2010-04-13clean up LD scripts and add some comments and proper license headersStefan Reinauer
2010-04-13use the standard udelay on sc520. Stefan Reinauer
2010-04-13Speed up coreboot_ram loading by moving the decompression stackStefan Reinauer
2010-04-13update atom car code in the same way that 6ex/6fx was updated.Stefan Reinauer
2010-04-13Fix eagleheights Stefan Reinauer
2010-04-12port latest model 6ex car changes to 6fx car, which is almost identical andStefan Reinauer
2010-04-12move model_6ex car to a single file. No more .c files that only consist of aStefan Reinauer
2010-04-12Move the CPU specific includes fromPatrick Georgi
2010-04-12Enable lazy evaluation of incs/lds for tiny bootblock, too.Patrick Georgi
2010-04-12- move the XIP_ROM_* flags to src/cpu/x86/Kconfig exclusivelyPatrick Georgi
2010-04-11add int15 handler for thomson ip1000Stefan Reinauer
2010-04-11do better error reporting in i82801dx early smbus functions.Stefan Reinauer
2010-04-11The ADL855PC was never confirmed working (in fact it's pretty sure that codeStefan Reinauer
2010-04-11add support for reading ip1000 gpios.Stefan Reinauer
2010-04-11simplify ram_read32 on i82830Stefan Reinauer
2010-04-11More trivial changes to i82830 raminit.c for USE_PRINTK_IN_CAR.Joseph Smith
2010-04-11Trivial changes to i82830 raminit.c for USE_PRINTK_IN_CAR.Joseph Smith
2010-04-09We don't define LB_CKS_* per board anymore:Patrick Georgi
2010-04-09Drop ASM_CONSOLE_LOGLEVEL from LX car code. We do output in C in copy_and_run /Stefan Reinauer
2010-04-09This patch changes C7 CAR code to be a single assembler file instead Stefan Reinauer
2010-04-09zero warning days.Stefan Reinauer
2010-04-09fix the broken nvidia chipset boards,Stefan Reinauer
2010-04-09zero warnings days.Stefan Reinauer
2010-04-09drop now unussed cpu_reset.incStefan Reinauer
2010-04-09zero warnings days.Stefan Reinauer
2010-04-09Drop the need for cpu_reset, it's really just a short cut to stage2.Stefan Reinauer
2010-04-09drop unused filesStefan Reinauer
2010-04-09remove some amd mainboard warnings.Stefan Reinauer
2010-04-09drop unused files, and we only use ASM_LOG_LEVEL in one file nowStefan Reinauer
2010-04-09zero warning days.Stefan Reinauer
2010-04-091. This patch adds CAR for Intel P6 series processors.Joseph Smith
2010-04-09copy_and_run.c is not needed twice, and it is used on non-car too.Stefan Reinauer
2010-04-09thin out romcc epilogue and have it call copy_and_run asStefan Reinauer
2010-04-09Indent model_fxx_init and model_10xx_init.Myles Watson
2010-04-09Copy acpi blobs in two parts to make sure gcc does the right thing.Myles Watson
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 09:00:04 +0000