summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2019-09-30device,drivers/: Drop some __SIMPLE_DEVICE__ useKyösti Mälkki
The simple PCI config accessors are always available under names pci_s_[read|write]_configX. Change-Id: Ic1b67695b7f72e4f1fa29e2d56698276b15024e1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-30getac/p470: Drop unused PCI secondary bus resetKyösti Mälkki
Change-Id: I959cdc08d43fea28f8bbc649cd46bab5656d6ca8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-09-30console: Declare empty printk() for __ROMCC__Kyösti Mälkki
The typical do { } while (0) did not work, so provide empty stub function instead. Change-Id: Ieb0c33b082b4c4453d29d917f46561c0e672d09a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-09-30soc/intel/fsp_baytrail: Drop some __BOOTBLOCK__ guardsKyösti Mälkki
Change in ssus_disable_internal_pull() is for romcc compatibility. Change-Id: Ib72a669a3b5cd90e74d917f74f35453a85941658 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-09-30mb/siemens/mc_bdx1: Enable VBOOTWerner Zeh
Enable VBOOT in Kconfig and provide a flashmap that includes all the needed sections for VBOOT support. Change-Id: Iee12a5d1781c869b20bc14a52ecbf23474caa3fd Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-09-30fsp_broadwell_de: Enable early write access to the SPI flashWerner Zeh
If VBOOT is used on a mainboard based on fsp_broadwell_de then VBOOT needs to be able to write to its NV data which may be stored on the SPI flash. Enable write access to the SPI flash on SoC level. If the mainboard does not use VBOOT the linker will drop the extra code. The benefit is that this code is at least compiled and therefore build tested with fsp_broadwell_de. Change-Id: I90a2d30f5749c75df2b286dce6779f10dde62632 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-09-30mb/google/drallion: Adjust GPD3 pin terminationBora Guvendik
Internal pull up need to be enabled for GPD3 as power button pin for PCH according cometlake pch EDS vol1 section 17-1. Without that pin will stay floating and hook up XDP can cause system shutdown as power buttone event will trigger. BUG=N/A TEST=Hook up XDP on drallion platform, able to boot up into OS and stay at power up state. Change-Id: Idd1befeb14a251b7c0542ca1f99049d07b28fb98 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-09-30mb/google/drallion: De-assert WWAN reset signalAamir Bohra
BUG=b:141734594 Change-Id: I419f7d11dffebe6c44eefa05750834d07d19857b Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-09-29amdfam_10h-15h: Use ENV_PCI_SIMPLE_DEVICEKyösti Mälkki
Change-Id: I265d50af1099ae4449b5adebcf21e2043aa02c7a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35654 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-29device/pnp_ops: Add ENV_PNP_SIMPLE_DEVICEKyösti Mälkki
Source files including this may have locally defined __SIMPLE_DEVICE__ so this cannot be placed in <rules.h>. Change-Id: I2336111b871203f1628c3c47027d4052c37899dc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35653 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-29device/pci_ops: Add ENV_PCI_SIMPLE_DEVICEKyösti Mälkki
Source files including this may have locally defined __SIMPLE_DEVICE__ so this cannot be placed in <rules.h>. Change-Id: If700dd10fd5e082568cd6866bfd802fc2e021806 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35652 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-29intel/fsp_baytrail: Drop unnecessary lookup for PCI 0:0.0Kyösti Mälkki
It is safe to assume this to be copy-paste from eg. i945 where registers of said PCI device were read. Change-Id: I387b7fd6caf317543a6438f973d9e1d96e418de3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35668 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-29soc/intel: Rename <intelblocks/chip.h>Kyösti Mälkki
The filename chip.h has a special purpose with the generation of static devicetree, where the configuration structure name matches the path to the chip.h file. For example, soc/intel/skylake/chip.h defines struct soc_intel_skylake_config. The renamed file did not follow this convention and the structure it defines would conflict with one defined soc/intel/common/chip.h if such is ever added. Change-Id: Id3d56bf092c6111d2293136865b053b095e92d6b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-28cpu,device/: Remove some __SIMPLE_DEVICE__ and __ROMCC__ useKyösti Mälkki
Change-Id: I62d7450c8e83eec7bf4ad5d0709269a132fd0499 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-09-28usbdebug: Remove some __SIMPLE_DEVICE__ useKyösti Mälkki
We can always PCI config accessors with pci_devfn_t. Change-Id: I6d98c2441cc870cdcadbe8fabc9f35b9ffc652d8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-09-28drivers/net/ne2k: Remove some __SIMPLE_DEVICE__ useKyösti Mälkki
Note that the code assumes mainboard code to configure any PCI bridges prior to calling console_init(). Change-Id: I0312d359f153c02e4afcf1c09d79f9eb3019a8b2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-09-28arch/arm,mips: Use generic PCI MMCONFKyösti Mälkki
We need the stub header file. If PCI was implemented, assume generic MMIO mapped configuration space would work here. Change-Id: Ia731e5c5a6725fe22ab8b0398cafa1127ed90891 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-09-28nb/via/vx900: Remove some __SIMPLE_DEVICE__ useKyösti Mälkki
Change-Id: I840131f91e79c740c0c8784c252723ae90ded458 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-09-28device/pci: Replace some __SIMPLE_DEVICE__ useKyösti Mälkki
Change-Id: Ide9df46b5ff47fea54b9de0e365638a6223c8267 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35642 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-09-28nb,sb/intel: Clean up some __BOOTBLOCK__ and __SIMPLE_DEVICE__ useKyösti Mälkki
Change-Id: Ie3f3c043daa6ec18ed14929668e5acae172177b3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-09-28nb/intel/x4x: Avoid x4x.h header with romcc-bootblockKyösti Mälkki
Change-Id: If8b70298bffd72d1de7f74917131d648c5fcab66 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35641 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-09-28mb/google/variants/drallion: Update the spd index mapAamir Bohra
BUG=b:141575294 Change-Id: I1b2b4362b84b170bd73b760828ca300ec86c4534 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-09-28mb/google/drallion: Set UART for console to UART controller 0Aamir Bohra
Drallion uses UART 0 for console, change the config accordindly. BUG=b:139095062 Change-Id: I0ae2f8459b6225b99b758180413afa22386355d4 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35633 Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-28Kconfig: Hide CONFIG_CBFS_SIZE when an FMDFILE is providedArthur Heymans
CONFIG_CBFS_SIZE should only be used as a parameter to generate the default FMAP. This also swaps around FMDFILE and CBFS_SIZE to avoid that the CBFS_SIZE entry disappears when filling in the FMDFILE entry below it. One advantage is that if code references CONFIG_CBFS_SIZE the jenkins buildtest will most likely fail as many boards provide an FMD file. Change-Id: Ic7926e1638d7fb49ba61af28d682315786c3c39e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-09-28mb/lenovo/x131e: enable mSATA slotJames Ye
Per google/stout. Tested with SanDisk SSD U110. Change-Id: I7cc9837f572236acac2007e95990e64c25a5d6e2 Signed-off-by: James Ye <jye836@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2019-09-27mb/lenovo/x131e: correct USB port configJames Ye
Based on schematic and register dumps. Change-Id: I91fc47022988cfe986fb8c1ed21dc073ee7d16bc Signed-off-by: James Ye <jye836@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-09-27fmap: Add get_fmap_flash_offset()Furquan Shaikh
CB:35377 changed the behavior of find_fmap_directory() to return pointer to CBMEM_ID_FMAP if fmap is cached in cbmem. lb_boot_media_params() calls find_fmap_directory to add offset of fmap in flash to coreboot table. However, because of the change in behavior of find_fmap_directory(), it ended up adding 0 as the offset. This change adds a new function get_fmap_flash_offset() which returns the offset of fmap in flash. Ideally, all payloads should move to using the FMAP from CBMEM. However, in order to maintain compatibility with payloads which are not updated, ensure that fmap_offset is updated correctly. Since find_fmap_directory() is no longer used outside fmap.c, this change also removes it from fmap.h and limits scope to fmap.c. In a follow up patch, we need to push a change to libpayload to expose the fmap cache pointer to lib_sysinfo. BUG=b:141723751 Change-Id: I7ff6e8199143d1a992a83d7de1e3b44813b733f4 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-09-27device: add commentary to dev_find_slot()Aaron Durbin
dev_find_slot() can sometimes fail to return the desired device object prior to full PCI enumeration. Comment the declaration and implementation accordingly to help the user understand the problem and avoid its usage. Change-Id: I3fe1f24ff015d3e4f272323947f057e4c910186c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35632 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-27mb/supermicro/x11-lga1151-series: remove unneeded vendor id configMichael Niewöhner
The vendor id option set here is useless as most SSVID registers get filled with 0x8086 (their VID) by default, anyway. Besides that the Kconfig option isn't meant for retrofit ports, cf. commit 7e1c83e31bd (Add Kconfig options to override Subsystem Vendor and Device ID). The right place would be the devicetree. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: If67c679bb342f63096902535734106e4f1651118 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-09-27lib/bootsplash: Fix compilationPatrick Rudolph
Add missing include. Tested on Supermicro X11SSH-TF. Change-Id: Id0c80ac646001a497e96cae4d48a0f09762eb936 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35613 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-26arch/: Replace __BOOTBLOCK__ with ENV_BOOTBLOCKKyösti Mälkki
Change-Id: I294a3fd7be57b505cd209f7c2718a05770786c51 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-26soc/amd/common/block/spi/fch_spi_ctrl.c: Fix SPI vendor id codeRichard Spiegel
All solid state devices have vendor id defined by JEDEC specification JEP106, which originally allocated only 7 bits for it plus parity. When number of vendors exploded beyond 126, a banking proposition came maintaining compatibility with older vendors while allowing for 4 extra bits (16 banks) through the introduction of the concept "Continuation code", denoted by the byte value of 0x7f. Examples: 0xfe, 0x60, 0x18, 0x00, 0x00 => vendor 0xfe of bank o 0x7f, 0x7f, 0xfe, 0x60, 0x18 => vendor 0xfe of bank 2 BUG=b:141535133 TEST=Build and boot grunt. Change-Id: I16c5df70b8ba65017d1a45c79e90a76d1f78550c Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-09-26soc/intel/fsp_broadwell_de: move get_busno1() into vtd.cAndrey Petrov
TEST=just build it Change-Id: I34aee507b8c322c816f92cfcae177c069c749ed7 Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-09-26mb/supermicro: restructure x11ssh-tf to represent a x11 board seriesMichael Niewöhner
Most of the X11 boards with socket LGA1151 are basically the same boards with just some minor differences like different NICs (1 GbE, 10 GbE), number of NICs / PCIe ports etc. There are about 20 boards that can be added, if there is a community for testing. To be able to add more x11 boards easily like x11ssm (see CB:35427) this restructures the x11ssh tree to represent a "X11 LGA1151 series". There were multiple suggestions for the structure like grouping by series (x10, x11, x...), grouping by chipset or by cpu family. It turned out that there are some "X11 series" boards that are completely different. Grouping by chipset or cpu family suffers from the same problem. This is why finally we agreed on grouping by series and socket ("X11 LGA1151 series"). The structure uses the common baseboard scheme, while there is no "real" baseboard we know of. By checking images, comparing logs etc. we came to the conclusion that Supermicro does have some base layout which is only modified a bit for the different boards. X11SSH-TF was moved to the variants/ folder with it's gpio.h. As we expect the other boards to have mostly the same device tree, there is a common devicetree that gets overridden by each variant's overridetree. Besides that some very minor modifications happened (formatting, fixing comments, ...) but not much. Documentation is reworked in CB:35547 Change-Id: I8dc4240ae042760a845e890b923ad40478bb8e29 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35426 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-26mb/mainboard/hatch: support elan touchpad for AkemiPeichao Wang
Modify IRQ pin from D21 to A21 and support wake-up from touchpad BUG=b:141519690 TEST=build bios and verify elan touchpad works fine Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I6cc5b780ffcee24f1f2a04e88c30628ceb5904e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35551 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-26google/grunt: add new two DDR source for TreeyaPeichao Wang
new DDR particle: 1. Samung K4A8G165WC-BCWE 2. Hynix H5AN8G6NCJR-XNC BUG=b:139085024 BRANCH=master TEST=rework new source to DUT and re-flash bios to DUT and verify DUT will bring up successfully Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I0d039af53938086733308a081a77a7398e7bf5d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-09-26cpu/intel/: Clean up microcode update from __PRE_RAM__Kyösti Mälkki
Change-Id: Ib12985dd9a12495533a82be556405f975a0abe27 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-26cpu/amd/pi/00730F01: Clean up microcode update from __PRE_RAM__Kyösti Mälkki
It is only called in ramstage. Even if it was called in romstage, execution flow is such that BSP and AP CPUs should not be able to enter update_microcode() routine concurrently. Also the Kconfig guarding the spin_lock() calls are not selected nor are the lock variables declared for these platforms. Change-Id: I1c2e106f10e8420e942b3ed082c677c0db95557c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35586 Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-25soc/fsp_broadwell_de: fix flashconsole support for platformMatt DeVillier
CB:29633 switched platform to use sb/common spi implementation, which worked until CAR_GLOBAL was removed in CB:30506. Revert the changes back to usage of CAR_GLOBAL in the common spi driver so that flashconsole will work again in romsatge for fsp_broadwell_de. Test: verify flashconsole functional on out-of-tree Broadwell-DE board Change-Id: I72e5db1583199b5ca4b6ec54661282544d326f0f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-09-25mb/google/kukui: Add new build target 'Juniper'Hung-Te Lin
Add the configuration 'Juniper' for the new mainboard. BUG=b:137517228 TEST=make menuconfig; select 'juniper' and build Change-Id: I94e3ac7f6de3fecf177e344cb217eaecf6362d69 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-09-25mb/google/hatch: Move SOC_INTEL_COMETLAKE selection to KconfigFurquan Shaikh
All variants of hatch are using Comet Lake and so the selection can be done in Kconfig without requiring each variant to do the same. Change-Id: Ief34296334ede5ba0f5f13381e92427ccc440707 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Andrew McRae <amcrae@chromium.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-09-25mb/siemens/mc_apl1: Sort the names of all variant mainboardsWerner Zeh
Sort the names of all variant mainboards in an ascending order. Change-Id: I19d502298744c0e0cbc91eb836c62ca90cdb9a5c Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-09-25mb/siemens/mc_apl{2,4,5}: Enable VBOOTWerner Zeh
Enable VBOOT in Kconfig and provide a flashmap that includes all the needed sections for VBOOT support. Change-Id: I3d58094256d2730dbd249291a8f1ed8df9dfe62d Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-09-25soc/intel/(apl,skl,cnl,common): Move mkhi_hdr structure definition to commonSridhar Siricilla
Removed mkhi_hdr structure definition from multiple SOCs, and moved to common. TEST=Built code for Hatch, apollolake boards. Change-Id: Ifeba0ed4d98975049179d1b47fb22c06a927dc29 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35545 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-24intel/cpu: Switch older models to TSC_MONOTONIC_TIMERKyösti Mälkki
The implementation of udelay() with LAPIC timers existed first, as we did not have calculations implemented for TSC frequency. Change-Id: If510bcaadee67e3a5792b3fc7389353b672712f9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34200 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-24cpu/intel: Use CPU_INTEL_COMMON_TIMEBASEKyösti Mälkki
Change-Id: I0e7159039751a88d86b6c343be5f085e6e15570a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-09-24intel/socket_mPGA604: Enable TSC_CONSTANT_RATEKyösti Mälkki
We can use intel/common implementation for tsc_freq_mhz(). Change-Id: I728732896ad61465fcf0f5b25a6bafd23bca235e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34199 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-24cpu/intel/common: Fix invalid MSR accessKyösti Mälkki
Fix regression from commit ecea916 cpu/intel/common: Extend FSB detection to cover TSC MSR_EBC_FREQUENCY_ID (0x2c) was not defined for affected CPU models and rdmsr() caused reset loops. Implementations deviate from public documentation. Change to IA32_PERF_STATUS (0x198) already used in i945/udelay.c to detect FSB to TSC multiplier. Change-Id: I7a91da221920a7e7bfccb98d76115b5c89e3b52e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-09-24Add Razer Blade Stealth (2016) H2UJohanna Schander
The Razer Blade Stealth H2U is a KabyLake System using: - Intel KBL 7500U - ITE8528E SuperIO - Intel 600P Series NVMe SSD - Either four MT52L1G32D4PG (16GB) or MT52L512MB32D4PG (8GB) of soldered memory in dualchannel mode - (Optional) Touchscreen - HDMI 2.0a via DP-1: Paradetech PS175 - AlpineRidge Thunderbolt 3 controller - TPS65982 USB-PD power switch / multiplexer Even though it has a 16MB chip equipped (W25Q128.V) only the first 8MB are used and mapped via IFD. The rest is left empty (0xFF). The flash is not secured in any way and can be read via flashrom. It should be the source for this port's IFD and ME blobs. Working: - USB-A Ports left and right - Speakers - Touchscreen (USB) - Onboard Keyboard in Linux - NVMe SSD - SeaBIOS, Tianocore and Grub Payloads - Webcam - Powersaving Modes - Battery state and LID switch, sometimes slow to update. - Touchpad (I2C-HID) - Headphones Not part of this commit: - Thunderbolt / USB-C (Requires advanced EC signaling) - Full HDMI support (Currently requires plugged connection at boot) Change-Id: I7ede881d631e1863f07f5130f84bc3b8ca61a350 Signed-off-by: Johanna Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2019-09-24device/mmio.h: Add bit field helpersHung-Te Lin
When accessing register with multiple bit fields, the common approach is to use clrsetbits_le32, for example: clrsetbits(&reg, (1 << 0) | (0x3 << 1) | (0x7 << 10), (1 << 0) | (0x1 << 1) | (0x5 << 10)); This hard to maintain because we have to calculate the mask values manually, make sure the duplicated shift (offset) was set correctly. And it may be even worse if the value to set will be based on some runtime values (that many developers will do a if-block with two very similar argument list), and leaving lots of magic numbers. We want to encourage developers always giving field names, and have a better way of setting fields. The proposed utility macros are: DEFINE_BITFIELD(name, high_bit, low_bit) EXTRACT_BITFIELD(value, name) WRITE32_BITFIELDS(addr, name, value, [name2, value2, ...]) READ32_BITFIELD(addr, name) Where a developer can easily convert from data sheet like BITS NAME 26:24 SEC_VIO Into a declaration DEFINE_BITFIELD(SEC_VIO, 26, 24) Then, a simple call can set the field as: WRITE32_BITFIELDS(&reg, SEC_VIO, 2); That is much easier to understand than clrsetbits_le32(&reg, 0x7 << 24, 0x2 << 24); And to extract the value: READ32_BITFIELD(&reg, SEC_VIO) That is equivalent to: (read32(&reg) & 0x3) >> 24 Change-Id: I8a1b17142f7a7dc6c441b0b1ee67d60d73ec8cc8 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35463 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-24mainboard/ocp/monolake: Hide internal NICAndrey Petrov
Disable root port IOU0 to which built-in NIC is attached. TEST=on OCP monolake, hide built-in NIC and make sure OS does not report built-in NIC Change-Id: I2384e7dd073355f0ced2902ac2d8418996b1c5aa Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2019-09-24soc/fsp_broadwell_de: Add devhide functionalityAndrey Petrov
Add function to hide IIO PCIe root ports. TEST=On OCP Monolake, hide built-in NIC PCIe root port [0.2.2 and 0.2.3] and make sure OS does not detect built-in NIC. Change-Id: I2fcac5b7d9a7a52a2801c010bfccf247f2a44581 Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-09-24emulation/qemu-i440fx: use fw_cfg_dma for fw_cfg_readHimanshu Sahdev
- configure DMA fw_cfg - add support to read using fw_cfg_dma - provide fw config version id info in logs BUG=N/A TEST=Build and boot using qemu-i440fx. Change-Id: I0be5355b124af40aba62c0840790d46ed0fe80a2 Signed-off-by: Himanshu Sahdev <himanshusah@hcl.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-09-24mb/google/kohaku: Update DPTF parameters and TCC offset settingSeunghwan Kim
This change applies fine-tuned DPTF parameters and TCC offset setting for kohaku. Also enables EC_ENABLE_MULTIPLE_DPTF_PROFILES for tablet mode. BUG=b:137688474 BRANCH=none TEST=built and verified the setting values Change-Id: I92e268b2e07ca5a04e29bda84ddb8fc21eb23251 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-09-24mediatek/mt8183: Use different DRAM frequencies for eMCP DDRHuayang Duan
Devices using eMCP may run at a high DRAM frequency (e.g., 3600Mbps) while those with discrete DRAM can only run at 3200Mbps. This patch enables 3600Mbps for eMCP DDR for better system performance. BUG=b:80501386 BRANCH=none TEST=Boots correctly and stress test passes on Kukui Change-Id: Iab6a9c2c390feeb9497b051a255b29566909e656 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-23vendorcode/cavium: Replace use of __PRE_RAM__Kyösti Mälkki
Change-Id: I7c93031c8c0e3a86261988edc956e8cd5a8dd961 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34998 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-23lib/trace: Replace __PRE_RAM__ useKyösti Mälkki
Change-Id: I957be92594aced2e8465e7f94d8d42e44c3418d7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35399 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-23mb/up/squared: Fill LPDDR4 dimm infoPatrick Rudolph
Fill the dimm info struct to make SMBIOS type 17 appear. TESTED=Up Squared Change-Id: I4de63362c8fea8a886594cdcf0eec48421afb605 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34564 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-23lib/fmap: Cache FMAP in cbmemPatrick Rudolph
For platform independend exposure of FMAP through a kernel module cache the FMAP in CBMEM. In addition add a pointer in coreboot tables pointing to the introduced CBMEM area. To not waste the allocated DRAM, use the cached CBMEM in RAM enabled stages if possible. Tested on qemu using https://github.com/9elements/linux/commits/google_firmware_fmap2 Tested on QEMU and Supermicro X11SSH-TF. Change-Id: I4e01c573c3edfa34dbba5fe7604d4f6e18b584d5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-09-22mb/gigabyte/ga-h61m-s2pv: Improve LPC decodingAngel Pons
Drop unused CNF2_LPC_EN, as there is no device which uses IO 0x4e/4f. Do not use the mainboard model to set COMA_LPC_EN. Make use of NO_UART_ON_SUPERIO instead, as it is more future-proof. Change-Id: Iac49250b0f509a42012f82db8aa85ba85559c66f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-09-22mb/mainboard/hatch: add spd: 8G_3200 for AkemiPeichao Wang
BUG=b:140545732 TEST=build bios and spd index set to 6, verify DUT bring up normally Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I337b0bdcd37a9c4baacccbc6786968031a41b31e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35511 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-22mb/ocp/monolake: Add vboot RO only supportPhilipp Deppenwiese
Change-Id: I28a21d64e2781af294670a94c1fc88fb81e80f9e Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35492 Reviewed-by: Andrey Petrov <anpetrov@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-22mb/google/hatch: Add G2Touch Touchscreen supportWisley Chen
Add G2Touch Touchscreen support for dratini BUG=b:141281841 TEST=emerge-hatch coreboot chromeos-bootimage, and check touchscreen work. Change-Id: I0dbde7f8396da6335b22aeb4a9703336e2b862b8 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-09-22mb/facebook/watson: Enable vboot for measurementsPhilipp Deppenwiese
Signed-off-by: Philipp Deppenwiese <philipp.deppenwiese@9elements.com> Change-Id: I8287d475301aaaae736df9cc95fcd18cc04b40fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/35232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <anpetrov@fb.com>
2019-09-22sb/intel/i82870: Drop unused fileKyösti Mälkki
Change-Id: I024805769ad05f995a23669a82f5482ce3e7ae70 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-09-22device/cardbus: Remove unnecessary bridge_ctrl bitmaskKyösti Mälkki
The bits PARITY and SERR are set unconditionally below. Change-Id: I03f53fe7f436f8feed7b34756439077f02a85565 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner
2019-09-22device/cardbus: Fix use of PCI_CB_BRIDGE_CONTROLKyösti Mälkki
Read-modify-write needs to access the same register. Numerically both used defines are 0x3e, while register implementations are not identical but only similar. Change-Id: I9348b855320f86868e2d3ef76d3b8d7a4ab7fae0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner
2019-09-22device/pci: Replace add with bitwise-orKyösti Mälkki
Change-Id: I9fbefac3bef7425d6f5ea1bcc01eb21485315c36 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-09-22mb/supermicro/x11ssh: remove unnecessary fsp setting CdClockMichael Niewöhner
CdClock does not need to be set because the board does not use IGD. Change-Id: I6835ccdf80530f9efc6fdeb0363dcf9267f99d21 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-22soc/intel/skylake: lock down TCO on pch finalizeMichael Niewöhner
Change-Id: I5bd95b3580adc0f4cffa667f8979b7cf08925720 Signed-off-by: Michael Niewöhner <michael.niewoehner@8com.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-09-21soc/fsp_broadwell_de: Move function to get CPUBUSNO(1) into common fileAndrey Petrov
Change-Id: I189eb8ffce2f0735ad9ba603b1d96786aa00fafb Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2019-09-21mb/ocp/monolake: Implement bank/locator schemeAndrey Petrov
Implement Locator and Bank fields (as reported by dmidecode) to match vendor BIOS. TEST=on OCP monolake, run dmidecode tool and see that "Locator" field matches expectation. Change-Id: Ia271ff1e596ba469cf42e23d8390401c27670a27 Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-09-21soc/fsp_broadwell_de: Use DIMM numbers relative to channelAndrey Petrov
Currently "DIMM numbers" increase monotonically for all the channels. However, commonly DIMMS are numerated on per-channel basis. This change makes numeration match the convention. TEST=on OCP monolake, run dmidecode tool and see that "Locator" field matches expectation. Change-Id: I3e7858545471867a0210e1b9ef646529b8e2a31c Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35318 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-21soc/amd/picasso: Use new common SPI codeRichard Spiegel
Use the new SPI code from common folder, delete spi.c. SPI related macros must be single defined, in southbridge.h if they are used by files other than the common SPI code, fch_spi.h if they are only used by the common SPI code. The only exception is SPI_FIFO_DEPTH which must be in southbridge.h, because it can change between SOC. BUG=b:136595978 TEST=None, code already tested with grunt. Change-Id: I68008ce076d348adbdabf7b49cec8783dd7134b4 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-09-21soc/amd/stoneyridge: Use new common SPI codeRichard Spiegel
Use the new SPI code from common folder, delete spi.c. SPI related macros must be single defined, in southbridge.h if they are used by files other than the common SPI code, fch_spi.h if they are only used by the common SPI code. The only exception is SPI_FIFO_DEPTH which must be in southbridge.h, because it can change between SOC. BUG=b:136595978 TEST=Build and boot grunt using new SPI code, with debug enabled. Check output. Change-Id: I639973d993316a10daa7564462e689b2c183f536 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-09-21soc/amd/common/block: Create new SPI codeRichard Spiegel
Create a new SPI code that overrides flash operations and uses the SPI controller within the FCH to its fullest. Reference: Family 15h models 70h-7Fh BKDG revision 3.06 (public) BUG=b:136595978 TEST=Build and boot grunt using this code, with debug enabled. Check output. Change-Id: Id293fb9b2da84c4206c7a1341b64e83fc0b8d71d Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-09-21drivers/wifi/generic.c: Upper case the AML WiFi name as required by specAndrew McRae
ACPI 6.3, ASL 20.2.2 (Name Objects Encoding) states: LeadNameChar := 'A'-'Z' | '_' NameChar := DigitChar | LeadNameChar Hence, the Intel WiFi names generated in ASL are required to be upper-cased letters. BUG=b:141206986 TEST=Reflash and confirmed SSDT table has correct name. Change-Id: I803b9bc81804eec7bd5220b9dbc6ddd0bb0ecbcc Signed-off-by: Andrew McRae <amcrae@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35466 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-21vboot: extend BOOT_MODE_PCR to SHA256 bank on TPM2Andrey Pronin
With the support of various algorithms and banks in tlcl_extend(), digest_algo parameter of tpm_extend_pcr() started defining the target PCR bank in TPM2 case. The OS expects coreboot to extend the SHA256 bank of BOOT_MODE_PCR. The value that the OS expects coreboot to extend into BOOT_MODE_PCR is the SHA1 digest of mode bits extended to the length of SHA256 digest by appending zero bytes. Thus the correct value for digest_algo passed into tpm_extend_pcr() for BOOT_MODE_PCR is TPM_ALG_SHA256. This didn't matter until adding the support for multiple digest introduced by patches like https://review.coreboot.org/c/coreboot/+/33252, as tlcl_extend always used SHA256 bank before. Change-Id: I834fec24023cd10344cc359117f00fc80c61b80c Signed-off-by: Andrey Pronin <apronin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35476 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-20sb/intel/common/fw: Make make aware that it needs binariesNico Huber
As we redirect all `dd` output to /dev/null (it would clutter the console otherwise), there is no error message if a binary to be added isn't found. If we add them as dependency, OTOH, `make` will complain properly. Change-Id: I40c3979b84341cb88c7e9a5084c1a97230ea5503 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33327 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-20mediatek/mt8183: Support more DRAM frequency bootupHuayang Duan
Add more DRAM frequency bootup to support DRAM frequencies 1600Mbps, 2400Mbps, 3200Mbps and 3600Mbps. BUG=b:80501386 BRANCH=none TEST=Memory test passes on eMCP platform Change-Id: Ic1378ca43fb333c445ca77e7dc0844cdf65f2207 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-20mediatek/mt8183: Implement the dramc init settingHuayang Duan
This patch implements the dram init setting by replacing the hard-coded init sequence with a series of functions to support calibration for more frequencies. These functions are modified from MediaTek's internal DRAM full calibration source code. BUG=b:80501386 BRANCH=none TEST=1. Kukui boots correctly 2. Stress test (/usr/sbin/memtester 500M) passes on Kukui Change-Id: I756ad37e78cd1384ee0eb97e5e18c5461d73bc7b Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-20mb/supermicro/x11ssh-tf: correct CBFS_SIZEMichael Niewöhner
The specified CBFS_SIZE does not make sense. The boards BIOS region is 0xb00000. Correct the value. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Ia3014c7fd081030607790ced6bb55323086f1161 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35458 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-20soc/qualcomm/ipq40xx: Remove unnecessary allocationJacob Garber
The bus variable doesn't live outside the scope of this function, and is only used as a convenient way for passing the pointers to all the sub-functions, so it doesn't need to be allocated. Put it on the stack instead. A similar fix for ipq806x was done in 0f33d8c29a (soc/qualcomm/ipq806x: Remove unnecessary allocation). Change-Id: Ibb1129b92e38a105e100f59e03d107de340b925c Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1294801 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-20nb/intel/nehalem: Enabled VBOOT supportPatrick Rudolph
Tested on Lenovo T410. Change-Id: I86100be79bf2337d65b688edba34b87f3ac18cb6 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-09-20soc/intel/common/intelblocks: Remove PAD_CFG_GPI_GPIO_DRIVER_SCITim Wawrzynczak
Intel's EDS says "1 = GPIO Driver Mode. GPIO input event updates are limited to GPI_STS. GPI_GPE_STS, GPI_NMI_STS and/or GPI_SMI_STS updates are masked." Therefore, the GPI_GPIO_DRIVER_SCI option for pad configuration is meaningless, as any GPE will be masked if the GPIO driver is set as owner. Change-Id: Ia0cd0041dfc985cbe388cb89a4026038c7fb4383 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35460 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-20mb/google/hatch: Remove GPIO_DRIVER from pen eject GPIO configurationTim Wawrzynczak
A closer read of the EDS indicates that when GPIO Driver mode is selected, GPIO input event updates are limited to GPI_STS only. GPI_GPE_STS updates are therefore masked, and we don't want to enable this behavior. It masks the GPE and does not allow us to see this GPE as a wake source, obscuring the reason that the system woke up. Also switch the IRQ from level-triggered to edge-triggered, otherwise the system will auto-wake from any sleep state when the pen is ejected from the garage. BUG=b:132981083 BRANCH=none TEST=Wake up system from S0ix using pen eject, verify that mosys eventlog shows GPE#8 as the S0ix wakeup source. Wake up system from S3 via pen eject, and verify that the wakeup source shows as GPE#8. Change-Id: If017e12e23134f5cfed7cbb6047cc9badd9bf7e8 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35459 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-20mb/google/hatch: override smbios manufacturer name from CBIWisley Chen
BUG=none TEST=emerge-hatch coreboot, use ectool to write oem name in CBI, and checked smbios manufacturer name. Change-Id: I9be85fbc47031d049b5bd51cfaf6232cab24e9fe Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-19sb/intel/ibexpeak: Add define for PRSTS registerAngel Pons
Change-Id: Ia9a6b0c7f2a07796f850acd2349067ba5e5eb735 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-09-19mb/google/drallion: add sku id base on sensor detectionEric Lai
Implementing logic base on sensor detection to determine SKU id. BUG=b:140472369 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I5e71ae6b97378b78055735bbf4b6b55ffe38b978 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35366 Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-19mb/google/drallion: Add memory init setup for drallionThejaswani Putta
This implementation adds below support 1. Add support to read memory strap 2. Add support to configure below memory parameters -> rcomp resistor configuration -> dqs mapping -> ect and ca vref config Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.com> Change-Id: I9993ad175e6f52711d5a05733aeab1bbed1e0b80 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-09-19cpu/intel/common: Extend FSB detection to cover TSCKyösti Mälkki
Use the same CPUID switch block to resolve the multiplier to derive TSC from FSB/BCLK frequency. Do not return 0 as base frequency. Change-Id: Ib7f1815b3fac7a610f7203720d526eac152a1648 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31340 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-19cpu/x86/lapic: Refactor timer_fsb()Kyösti Mälkki
Common apic_timer code in cpu/x86 should not depend on intel header files. Change-Id: Ib099921d4b8e561daea47219385762bb00fc4548 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34091 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-19cpu/intel/common: Add CPU_INTEL_COMMON_TIMEBASEKyösti Mälkki
To add a common tsc_freq_mhz() implementation, we need to guard againts soc-specific duplicate definitions. Change-Id: I37a34651d9e7d823ad5689d30739294358a97e31 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31341 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: David Guckian Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-19cpu,mb,soc: Init missing lb_serial struct fieldsJacob Garber
Initialize the input_hertz and uart_pci_addr fields of the lb_serial struct to prevent later undefined reads in lb_add_serial(). This was done for exynos5420 in commit ff94e00362 (soc/samsung/exynos5420/uart.c: Init new serial struct variables), and this patch finishes the rest. Note that not all of the drivers can have the UART PCI address configured at build time, so a follow-up patch will be needed to correct those ones. Change-Id: I733bc8185e2f2d28a9823495b53d6b09dce4deb1 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1354778 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34548 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-19src/soc/intel/common/block/cse: Add hmrfpo related functions to cse libSridhar Siricilla
Below new functions are added: * send_hmrfpo_enable_msg() - Sends HMRFPO Enable command to CSE. This API sets ME in SEC_OVERRIDE mode. The mode prevents CSE to execute SPI I/O cycles to CSE region, and unlocks the CSE region to perfom updates to it. * send_hmrfpo_get_status_msg() - Sends HMRFPO Get Status command to CSE TEST=Verified sending HMRFPO_ENABLE & HMRFPO_GET_STATUS HECI commands on CML RVP & hatch board Change-Id: I559bc4641e12df7ed39b1c97097bf068f9a232db Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-09-18mb/google/hatch/variants/helios: Add DPTF control for ambient sensorSumeet Pawnikar
Add DPTF based thermal control for ambient sensor for CML based Helios system. Also, update other sensor names information. BUG=b:139335207 BRANCH=None TEST=Build and Boot on Helios board and check all sensor details. Change-Id: I322d53536fbdf6db70f5a24afb322d9f206eaeac Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-18mb/google/hatch/variants/helios: Update DPTF parametersSumeet Pawnikar
Update DPTF thermal temperature threshold values for CML based Helios system. This updates CPU active cooling temperature threshold to appropriate values which addresses the issue of running the Fan at lower CPU temperature as per bug. Also, added active cooling temperature thresholds for other TSR sensors. BUG=b:141087272 BRANCH=None TEST=Build and boot on Helios board to check the fan functionality. Change-Id: I5c8502f8c9e6121c18024d2a8d5a4f7680797b8d Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35446 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18cpu/via/nano: Enable TSC_MONOTONIC_TIMERKyösti Mälkki
Change-Id: Iea51a480fd7c696a6bbccc0b668acdbff6abffb7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34203 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18cpu/qemu-x86: Enable TSC_MONOTONIC_TIMERKyösti Mälkki
Change-Id: I72afb0c0d34157d1d2d9fe4ae6704cd2502f724d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34202 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18x86emu: Drop UDELAY_LAPIC dependencyKyösti Mälkki
It won't build though, since current_time_from() has been removed. Change-Id: I2f7788f626c0504e6354a08b7986e4d18be140a5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34201 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>