summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2016-05-09google/oak: Configure MAINBOARD_PART_NUMBER by the board nameYidi Lin
BRANCH=none BUG=none TEST=check CONFIG_MAINBOARD_PART_NUMBER value in the coreboot.config Change-Id: Iefae44f4cd16d0e749f5b88d80ef6e5c23498c6d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 99b26f5a68054619c519c945172e56c10f353558 Original-Change-Id: I51c47d114049caf04ccb491096b39696e6af2ab3 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/339800 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14693 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/oak: elm: Update the differences between oak-rev6 and elm-rev0Yidi Lin
- Remove the deprecated revison settings. - Change LID pin to SPI_CK. - Add i2c bus number and i2c slave address for elm. - Skip the pin configurations(ALC5514 and USB OC pins) belonging to Oak. - Add Hynix 4GB DRAM config BRANCH=none BUG=chrome-os-partner:51725 TEST=boot to kernel on elm-rev0 Change-Id: Ifaedd115c84d095ee289b576ff76af6b0aa3e545 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2ed4543cdc7e84a0463b73dda96027270ec30272 Original-Change-Id: Id957374d7a67b8c72df1d07a6cecc1064d4e0356 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332733 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14692 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/oak: Add derivative board ElmJulius Werner
This patch adds a new mainboard Google/Elm as a derivative of Google/Oak, using the same code sharing technique for derivative boards that was pioneered with Google/Veyron*. For now, there are no firmware-relevant fundamental differences between the two boards. In addition, introduce a board-specific Kconfig for the "board ID adjustment" to represent the fact that the Elm board ID space mirrors the Oak board ID space with an offset of 6, meaning Elm rev0 is equivalent to Oak rev6, and future board changes will be made on both boards to maintain this stride (at least virtually... not all of those revisions will necessarily get built). This should make it much easier to keep the code that handles revision differences somewhat clean. (That's the theory, anyway... whether it will work out remains to be seen.) BRANCH=None BUG=None TEST=Booted Elm image with hardcoded board ID 0 on Oak rev6. Change-Id: If540aea862b746cf4986a74482ae1764c104fb73 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 53cd85c94945ab0bf14cb88a98e66723fc4483de Original-Change-Id: Ib05fc81dc4f4308d99e34fce74c6db8b323785da Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/332276 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14691 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/oak: configure displayJitao Shi
BRANCH=none BUG=chrome-os-partner:43706 TEST=saw bootloader screen on rev4 and rev5 Change-Id: I844fed6f63467ad04d17115934a1e4724cc0b671 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2e9d57a42402631923c96e70bc2eff5c135de2fc Original-Change-Id: I748b0eac9a0aab1d38d5d44a1a50dc33d5375379 Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/331813 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/14690 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09mediatek/mt8173: Add display driverJitao Shi
BRANCH=none BUG=none TEST=saw bootloader screen on rev4 and rev5 with CL:331813 Change-Id: Ibb01cf251276d2c059739f10e166fefd0de35460 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8d52a4c486b75b99dc25657ccb6ed90f671c26d6 Original-Change-Id: I4efe439d52b5a5516145960bcffb340152bfba53 Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/331812 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/14689 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09ec/google/chromeec/acpi: Add GOOG0004 to load cros_ec_lpc dynamically.Gwendal Grignou
Add a GOOG0004 object that will be used to load cros_ec_lpc. BUG=chromium:516122 BRANCH=none TEST=Compile. Work in cyan branch. Change-Id: Id8d9487ea6f376728eaa57728baceda7e5f6b2b9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6380104986d2740a14fc74161fec9f2994d2affc Original-Change-Id: I682d68e0858327ec7c0fbd0924dd9f99527d4df0 Original-Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/342363 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14686 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09spi: Add support for Winbond W25Q256Varadarajan Narayanan
BUG=chrome-os-partner:49249 TEST=None. Initial code not sure if it will even compile BRANCH=none Change-Id: Ifde289ec004f5d54d5df32011c87e49470e2bb5d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 613b5ae45f7b8325863d8be492a451e6d076e293 Original-Change-Id: I93386e058a60b5c9b61d89607cf8c6e0de6a21ca Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/334522 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/14666 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09soc/intel/skylake: Enable another VR mailbox command for certain boardsSubrata Banik
Command List: Send command for PS4 exit fails BUG=chrome-os-partner:52355 BRANCH=glados TEST=Build and boot lars and verify no hang during active idle CQ-DEPEND=CL:*257305 Change-Id: I9ffae71b1a38433ffc48ee7be7e2a13e69ad5b87 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 96f00e2d153f92339c378ce256eb7ce6824e3368 Original-Change-Id: I320ae154f3f7145811b57258ddb61b3beb584273 Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/341330 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14688 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09soc/intel/skylake: Output more ME status informationDuncan Laurie
Output a few more status bits from HFS/HFS2 and add some interesting bits from HFS3. BUG=chrome-os-partner:52662 BRANCH=glados TEST=boot on chell and verify ME status output Change-Id: I989b680f203678dbe28559e858faf8b4e0837481 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8ea34ab019da3fff965102bcef5158ddcc154728 Original-Change-Id: Iff977c8d85b4d4dfa00b5b19bc29d11813a99b9f Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/340390 Original-Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-on: https://review.coreboot.org/14687 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-05-09tegra124: Align the framebuffer's bytes-per-line to 32Paul Kocialkowski
It turns out that tegra124 needs the framebuffer's bytes-per-line to be aligned to 32 for proper display. This behaviour was default before moving to edid_set_framebuffer_bits_per_pixel. This fixes display on nyan_big. Change-Id: Ie81b395fca23f3648ea7cd1df51152faea864c9a Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/14564 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09tegra132, tegra210: Align the framebuffer's bytes-per-line to 64Paul Kocialkowski
It turns out that tegra132 and tegra 210 need the framebuffer's bytes-per-line to be aligned to 64 for proper display. This behaviour was default before moving to edid_set_framebuffer_bits_per_pixel. Change-Id: I46dadcf36e1c50e9649121ee6fa9cdf6134a531e Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/14734 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09tegra132, tegra210: Fix "becasue" typo in commentsPaul Kocialkowski
This renames "becasue" occurrences to "because". Change-Id: I7862ce6a865cb1525ca1cef69c2eb1e90cc76a9d Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/14735 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-05-09arch/armv7: Fix end index calculation in mmu_config_range_kbVaradarajan Narayanan
BUG=chrome-os-partner:49249 TEST=None. Initial code not sure if it will even compile BRANCH=none Change-Id: Ib0fccfe2d103710c006cb3950c65b11b8d596912 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9be5f58bb89ec43d4eb264c94c3f745dcade35dd Original-Change-Id: If50efb55d4974dfcab07d3ae6488c2413b505a1f Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/333301 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14657 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins)
2016-05-09siemens/mc_tcu3: Fix spelling of *set up*Paul Menzel
The verb *set up* is written with a space [1]. So correct that in the function descriptions. [1] http://www.merriam-webster.com/dictionary/set%20up Change-Id: Icf5aa7eca2c379fdf7ff1935d71efc347f5ce6fa Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/14701 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09siemens/mc_tcu3: Add blank lines for better legibilityPaul Menzel
Change-Id: I6d1200dd59e53ca892594c1fce784639a9817550 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/14700 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09siemens/mc_tcu3: Remove unneeded variable assignmentPaul Menzel
Assigning the value `1` to `status` in the default branch of the switch statement is not needed, as the stored value is overwritten before it can be used. Change-Id: I532b0e217ff4ed315cd30b08d339c755c6df7539 Found-by: Coverity, CID 1355008: Code maintainability issues (UNUSED_VALUE)) Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/14699 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09lib/prog_loaders: Allow platforms to skip stage cacheFurquan Shaikh
Before multi-CBFS support was added, x86 platforms cached their ramstage in TSEG so that it could be re-used on the resume path. However, more resources/assets are being put in cbfs that are utilized during ramstage. Just caching ramstage does not mean that correct cbfs region is used for all the data. Thus, provide an option to allow platforms to skip caching any component for resume. Change-Id: I0e957a6b859cc7d700aaff67209a17c6558be5de Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14636 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-05-09xip: Do not pass --xip for early stages if CAR supports code executionFurquan Shaikh
On modern x86 platforms like apollolake, pre-RAM stages verstage and romstage run within the cache-as-ram region. Thus, we do not need to pass in the --xip parameter to cbfstool while adding these stages. Introduce a new Kconfig variable NO_XIP_EARLY_STAGES which is default false for all x86 platforms. Apollolake selects this option since it supports code execution with CAR. Change-Id: I2848046472f40f09ce7fc230c258b0389851b2ea Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14623 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-08intel/pineview: Don't try to store 34 bits in 32Stefan Reinauer
Mask out the bit that doesn't fit in 32bits, so gcc 6.1 is happy Change-Id: I13e2b41742206b8d86b90314b80cc324c00ae637 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14639 Reviewed-by: Damien Zammit <damien@zamaudio.com> Tested-by: build bot (Jenkins)
2016-05-08parade/ps8640: Initialize edid_sizePatrick Georgi
decode_edid either gets EDID_LENGTH bytes or (in the extended case), 2*EDID_LENGTH. See that this is reflected in its size argument. Change-Id: If6c76358db4e9ee01c2bd2dbdd5948c61b7aa5bc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14698 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-07google/foster: Configure audio codec padsStefan Reinauer
Otherwise, newer GCCs will insist that they get deleted. Change-Id: Ida45b7d193366f5e611a32632ba610193451b082 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14619 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-06amd/gx2 + amd/lx: Fix shift overflow issueStefan Reinauer
gcc 6.1 complains that SMM_OFFSET << 8 is larger than the register it is assigned to (rightly so): src/northbridge/amd/gx2/northbridgeinit.c:196:23: error: result of '1077936128 << 8' requires 40 bits to represent, but 'int' only has 32 bits [-Werror=shift-overflow=] msr.lo = (SMM_OFFSET << 8) & 0xfff00000; ^~ Change-Id: Ib0d669268202d222574abee335a6a65c8a255cc7 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14617 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-06rtc: Do checksum check for all bytesStefan Reinauer
Due to missing braces (that went undetected because of the indentation), I584189d9fcf7c9b831d9c020ee7ed59bb5ae08e8 CMOS: add set_option() only takes the last changed byte into regard when determining whether the checksum needs to be updated. This bug went undetected for 5 years. Change-Id: I47cedc801a60959386dfdcda3a13b8e3162a7ecb Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14616 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-06drivers/intel/fsp2_0: Update to FSP draft 9Andrey Petrov
Recent FSP draft slightly changed FSP_INFO_HEADER structure. This change keeps FSP driver code in sync with header changes. Change-Id: I3536f766a312b9eb73ab8940d91dc9b9dfa347f1 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14614 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-06ec/google/chromeec/ec_lpc: Declare used IO ports as a resourceAlexandru Gagniuc
Chrome EC uses IO ports 0x800 -> 0x9ff to communicate over LPC; however, those ports were not declared as a resource. This had two major downsides: * It allowed the allocator to assign said ports to other devices * It required manually open up an IO window in the LPC bridge. The LPC bridge on many chromeec boards had to be painstakingly adjusted to meet these constraints. The advantage of declaring the resources upfront is that the lpc bridge can now scan its child resources and automatically open up IO windows, as requested by its LPC children devices. Change-Id: I35c4e48dddb7300674d7a9858b590c1f20e3b0e3 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14585 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-05-06soc/apollolake/lpc: Allow configuring SERIRQ via devicetreeAlexandru Gagniuc
Every other SOC uses a CONFIG_* flag to enable or disable SERIRQ continuous mode. Why they do that is beyond me, but the way we implement it on apollolake is via devicetree. Change-Id: I6e05758e5e264c6b0015467dd25add3bffe2b040 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14586 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-06intel/amenia: Declare ChromeEC in devicetree.cbAlexandru Gagniuc
This allows the chomeec driver to declare its resources so that IO windows to LPC are opened up during resource allocation. Change-Id: Ife98ecb4cbf5393493e6c71742de8d37953df548 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14591 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-06intel/amenia: Check with EC if we should enter recovery modeAlexandru Gagniuc
Change-Id: Id35a74e3968315659b323e0ba348ad38ca11981b Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14590 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-06ec/google/chromeec/ec_commands.h: Include stdint.hAlexandru Gagniuc
This file use stdint types, but does not include the appropriate header. This creates a parasitic dependency on including stdint.h before ec_commands.h. Fix that by including the necesarry header. Change-Id: I52477028c4ba8f6ffad0356c09e5fad4972649ed Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14589 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-06intel/amenia: Configure the bridge to ChromeEC in the bootblockAlexandru Gagniuc
Communication with ChromeEC, which is on the LPC bus, is needed early on for vboot purposes. I'm not sure if Google wants to have the interface available in bootblock or romstage, so we're confguring it in the bootblock. The bridge is automatically reconfigured during ramstage in a way in which we don't get duplicate windows opened upt to LPC. Change-Id: I77887e881d23f655495dec2687394409a5bb8cf5 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14588 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-06soc/apollolake/lpc_lib: Add utility to configure LPC padsAlexandru Gagniuc
Change-Id: Iaf325863681ad9b8b5d7662a9d267488b8fdf008 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14587 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-06soc/apollolake/lpc: Open I/O to LPC based on resource allocationAlexandru Gagniuc
Besides a number of fixed memory windows, Apollolake supports opening a configureable 64 KiB MMIO window, as well as four PMIO windows to the LPC bus. Open up these windows dynamically, based on how resources were allocated to the child LPC devices. Change-Id: I170e861693cb6fd1be38889adc951f197a13460f Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14584 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-06Revert "soc/intel/apollolake: Enable LPC bus interface"Alexandru Gagniuc
This reverts commit e976bd44692d2adb320a1256f1b6bfaa6469108a. The LPC resource allocation will be completely reworked in subsequent patches. The most straightforward approach is to start by reverting the existing code. Change-Id: I2475542b79817020d4c956f22ed5856f05046b16 Reviewed-on: https://review.coreboot.org/14583 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-06intel/amenia: Do not manually open up IO windowsAlexandru Gagniuc
Do not use devicetree.cb to manually control hardware registers. This interface will be removed in a subsequent commit and replaced with runtime allocation that also does sanity checking. Change-Id: I55561085ea467f19f52110b1a59f45fe290c7f09 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14582 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-06soc/intel/apollolake: fix incorrect bdsm -> tolud memory resourcesAaron Durbin
The wrong base address was being used for the region of memory between BDSM and TOLUD. This resulted in a very large reserved region starting at TOLUD instead of BDSM. Change-Id: I41d06267ffa93ea47aa059f4ddb7b9c349e51583 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14628 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-06soc/intel: indicate to build system that XIP_ROM_SIZE isn't usedAaron Durbin
The XIP_ROM_SIZE Kconfig variable isn't used for these chipsets. Therefore, indicate as such so that romstage can be placed in cbfs less rigidly. Change-Id: If5cae10b90e05029df56c282e8adf37fa0102955 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14626 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-06cpu/x86: don't treat all chipsets the same regarding XIP_ROM_SIZEAaron Durbin
Previously, the XIP_ROM_SIZE Kconfig variable is used globally on x86 platforms with the assumption that all chipsets utilize this value. For the chipsets which do not use the variable it can lead to unnecessary alignment constraints in cbfs for romstage. Therefore, allow those chipsets a path to not be burdened by not passing '-P $(XIP_ROM_SIZE)' to cbfstool when adding romstage. Change-Id: Id8692df5ecec116a72b8e5886d86648ca959c78b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14625 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-06{cpu,soc}/intel: remove unused smm_init() functionAaron Durbin
There used to be a need for an empty smm_init() function because initialize_cpus() called it even though nothing called initialize_cpus(). However, garbage collection at link time is implemented so there's no reason to provide an empty function to satisfy a symbol that is completely culled during link. Remove it. Change-Id: Ic13c85f1d3d57e38e7132e4289a98a95829f765a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14605 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-06cpu/x86/mp_init: reduce exposure of internal implementationAaron Durbin
With all users converted to using the mp_ops callbacks there's no need to expose that surface area. Therefore, keep it all within the mp_init compilation unit. Change-Id: Ia1cc5326c1fa5ffde86b90d805b8379f4e4f46cd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14598 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-06soc/intel/skylake: convert to using common MP and SMM initAaron Durbin
In order to reduce duplication of code use the common MP and SMM initialization flow. Change-Id: I5c4674ed258922b6616d75f070df976ef9fad209 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14597 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-05-06cpu/intel/haswell: convert to using common MP and SMM initAaron Durbin
In order to reduce duplication of code use the common MP and SMM initialization flow. Change-Id: I80b5b94b62bdd001581eb56513a0d532fffb64e8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14596 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-05-06soc/intel/broadwell: convert to using common MP and SMM initAaron Durbin
In order to reduce duplication of code use the common MP and SMM initialization flow. Change-Id: I74c81c5d18dff7a84bfedbe07f01e536c0f641fa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14595 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-05-06soc/intel/apollolake: convert to using common MP initAaron Durbin
In order to reduce duplication of code use the common MP initialization flow. Change-Id: I8cfb5ba6f6a31fecde2ce3bf997f87c4486ab3ab Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14594 Tested-by: build bot (Jenkins) Reviewed-by: Hannah Williams <hannah.williams@intel.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-06soc/intel/braswell: convert to using common MP and SMM initAaron Durbin
In order to reduce duplication of code use the common MP and SMM initialization flow. Change-Id: I65beefec53a29b2861433bc42679f3fa571d5b6a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14593 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-06soc/intel/fsp_broadwell_de: convert to using common MP initAaron Durbin
In order to reduce duplication of code use the common MP initialization flow. Change-Id: I2a7c628cfae7cf6af6e89fa8fc274f59127ff7c7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14592 Tested-by: build bot (Jenkins) Reviewed-by: York Yang <york.yang@intel.com>
2016-05-06soc/intel/apollolake: Correct PCI write size in romstageFurquan Shaikh
1. PCI command reg write should be 16-bit. 2. HPTC reg write should be 8-bit. Also, use macros instead of hard-coded values. Currently, the macros are defined in romstage.c, but if more P2SB macros are added, it would be good to move them to a separate header file. Change-Id: Iad1eb6a95467a41ecf454092808d357425c4c2fc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14613 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-05-05rdc/r8610: Move to src/socStefan Reinauer
Change-Id: I99e5d7f3b46c90ca863ddf6c186b5447d0c8e6f2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14607 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-05dmp/vortex86ex: Merge northbridge and southbridge into socStefan Reinauer
Change-Id: I16c04452d2d6c3205aea29fe8aa8fad8fc485a46 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14600 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-05lib/reg_script: Fix bracesStefan Reinauer
In If0d4d61ed8ef48ec20082b327f358fd1987e3fb9 the code was changed from one to two lines in the body of an if() statement, without adding braces. Change-Id: Ibbbdf240157adae95151fb2ce0135948caa60108 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14621 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-05-05soc/intel/quark: Add script time delay supportLee Leahy
Add time delay support to the scripts. TEST=Build and run on Galileo Gen2 Change-Id: I2c87977e2a2547e00769e59e1ee81fbbb5dff33f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14555 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-05soc/intel/quark: Add temperature sensor supportLee Leahy
Migrate the temperature sensor support from QuarkFspPkg into coreboot. TEST=Build and run on Galileo Gen2 Change-Id: I6dc68c735375c9d1777693264674521f67397556 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14565 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-04soc/intel/quark: Add USB PHY initializationLee Leahy
Add register access support using register scripts. Initialize the USB PHY using register scripts. TEST=Build and run on Galileo Gen2 Change-Id: I34a8e78eab3c7314ca34343eccc8aeef0622798a Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14496 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-04drivers/xpowers: Switch to src/drivers/[X]/[Y]/ schemeStefan Reinauer
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make them pluggable. Change-Id: Idae5ee5f1f48d904b704abe618165c0bec839979 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14048 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-04soc/apollolake: Set BootMode based on previous sleep stateRavi Sarawadi
- fill_power_state makes a copy of the current snapshot of power management registers in CAR variable "power_state" for use in ramstage - migrate_power_state adds CAR variable "power_state" to CBMEM (CBMEM_ID_POWER_STATE) - s3_resume state is updated in romstage_handoff block Change-Id: I842b85c5e562893b58cd3b3f6432695fbd4430bf Signed-off-by: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/14550 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-04soc/apollolake/romstage: Do not cast const to non-const pointersAlexandru Gagniuc
That was a workaround for the MRC cache API, which has since been reworked. The workaround is no longer needed. Change-Id: I1c1883f3ea37245615248459cd993ed774bf92de Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14574 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-05-04soc/intel/common/mrc_cache: Honor MRC data as a constant pointerAlexandru Gagniuc
The MRC cache API has absolutely no reason to modify the data it is asked to stash. Reflect that by taking all "data" parameters as const void *. Change-Id: I7a14ffd7d5726aa9aa5db81df82c06e7f87b9d9f Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14250 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-05-04nb/intel/sandybridge/raminit: support calling dram_freq multiple timesPatrick Rudolph
The PLL will never lock if the requested frequency is already set. As the fallback may request the same frequency again exit early to prevent a hang. Test system: * Gigabyte GA-B75M-D3H * Intel Pentium CPU G2130 Change-Id: I625b2956346d8c50cca84def6190c076bf99dbec Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14174 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-04nb/intel/sandybridge/raminit: add additional fallbacksPatrick Rudolph
Add the following fallbacks: * Try decreasing clock frequency. In case of DDR1600 the next possible value of DDR1333 is being used. * Try decreasing clock frequency. In case of DDR1333 the next possible value of DDR1066 is being used. * Disable failing channel. The system may be able to boot with a single channel enabled. The fallbacks are untested. Change-Id: I3be7034ad25312b3ebf47a54f335a3893f8d7cc1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14173 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-04nb/intel/gm45: Fix native text mode initializationNick High
The LVDS port is configured to accept data from pipe A, but the panel fitter and VGA were attached to pipe B. Changes to VGACNTRL: - select pipe A instead of pipe B. - disable VGA centering to fix jitter. TEST=Build and run on Thinkpad X200 in both text and framebuffer modes. Change-Id: I2356f264580d8b021952c217de3477291d866f98 Signed-off-by: Nick High <nhigh@openmailbox.org> Reviewed-on: https://review.coreboot.org/14524 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2016-05-04lib/reg_script: Add display supportLee Leahy
Add the ability to enable the display of the script: * Added REG_SCRIPT_COMMAND_DISPLAY to enable and disable display output * Added context values to manage display support * display_state - Updated by the command to enable or disable display * display_features - May be updated by step routine to control what the step displays for register and value * display_prefix - Prefix to display before register data * Added REG_SCRIPT_DISPLAY_ON and REG_SCRIPT_DISPLAY_OFF macros to control the display from the register script * Added REG_SCRIPT_DISPLAY_REGISTER and REG_SCRIPT_DISPLAY_VALUE as two features of the common display. With these features enabled the following is output: * Write: <optional prefix> register <-- value * Read: <optional prefix> register --> value TEST=Build and run on Galileo Gen2 Change-Id: If0d4d61ed8ef48ec20082b327f358fd1987e3fb9 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14553 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-04soc/intel/fsp_baytrail: convert to using common MP and SMM initAaron Durbin
In order to reduce duplication of code use the common MP and SMM initialization flow. Change-Id: I709ea938b720f26b351a1f950593efe077edb997 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14581 Tested-by: build bot (Jenkins) Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
2016-05-04soc/intel/baytrail: convert to using common MP and SMM initAaron Durbin
In order to reduce duplication of code use the common MP and SMM initialization flow. Change-Id: I5c5d678d7adb4c489752cca80b20f785ec8749d4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14580 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-05-04cpu/x86: combine multiprocessor and SMM initializationAaron Durbin
In order to reduce code duplication provide a common flow through callback functions that performs the multiprocessor and optionally SMM initialization. The existing MP flight records are utilized but a common flow is provided such that the chipset/cpu only needs to provide a mp_ops structure which has callbacks to gather info and provide hooks at certain points in the sequence. All current users of the MP code can be switched over to this flow since there haven't been any flight records that are overly complicated and long. After the conversion has taken place most of the surface area of the MP API can be hidden away within the compilation unit proper. Change-Id: I6f70969631012982126f0d0d76e5fac6880c24f0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14557 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-04cpu/x86: remove BACKUP_DEFAULT_SMM_REGION optionAaron Durbin
Unconditionally provide the backup default SMM area API. There's no reason to guard the symbols behind anything since linker garbage collection is implemented. A board or chipset is free to use the code or not without needing to select an option. Change-Id: I14cf1318136a17f48ba5ae119507918190e25387 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14561 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-04broadwell/me: Fix out-of-bounds array access errorEvan Lojewski
Fix an issue where a broadwell machine without the ME installed could result in an invalid status code being reported. For certain values, this would result in the intel_me_status function never returning. Fix has been tested on a samus board w and w/o the ME blob installed. Change-Id: I96667d3b89393f161e4d4efe0544efac98367e6c Signed-off-by: Evan Lojewski <meklort@gmail.com> Reviewed-on: https://review.coreboot.org/14409 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-05-04cpu/x86/smm_module_loader: always build with SMM module supportAaron Durbin
The SMM module loader code was guarded by CONFIG_SMM_TSEG, however that's not necessary. It's up to the chipset to take advantage of the SMM module loading. It'll get optimized out if the code isn't used anyway so just expose the declarations. Change-Id: I6ba1b91d0c84febd4f1a92737b3d7303ab61b343 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14560 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-03soc/intel/quark: Add IntelQNCConfig.h from EDK-IILee Leahy
Add the EDK-II Quark file IntelQNCConfig.h. This adds the definitions for the temperature sensor. TEST=Build and run on Galileo Gen2 Change-Id: I70896e6187b878ea572535432912f1d4db895a99 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14497 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-03mainboard/intel/galileo: Enable I2C and GPIOLee Leahy
Enable the I2C and GPIO controllers TEST=Build and run on Galileo Gen2 Change-Id: I97bbbb7c5e72edbed14702a4129d9cfa977e1911 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14558 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-03vendorcode/intel/fsp/fsp1_1/quark: Update FspUpdVpd.hLee Leahy
Update the file to match the QuarkFsp code. TEST=Build and run on Galileo Gen2 Change-Id: I090578d32165d34863548aec0e4a38fe915683c6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14452 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-03chromeos: Ensure that the last file in FW_MAIN is not also the first onePaul Kocialkowski
In the case where one of the FW_MAIN regions is empty, the last file (empty) will also appear to be first and have a zero offset, making head complain. This is a very borderline use case, since the FW_MAIN_ regions should have been filled previously, but an extra check doesn't hurt. Change-Id: I15491c5b4a5e7d1f9fb369cc5fa4e3875e2dad3b Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/14472 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-05-03intel/baytrail: use fmap information for code cachingPatrick Georgi
Instead of using CBFS_SIZE from Kconfig, use values generated from fmap. While at it, make sure that the cached region size is a power of two. fmap_config is also added to cpu_incs-y, but that doesn't hurt (except for some miniscule increase in compile time) because it's #if-guarded. The upside is that dependencies are tracked properly. Change-Id: I03a919e1381ca3d0e972780b2c7d76c590aaa994 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14573 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-03lib/cbfs: Use fmap derived information about the COREBOOT regionPatrick Georgi
It used to use CONFIG_CBFS_SIZE. The plan is that CBFS_SIZE only informs default*.fmd generation, while everything else derives its information from there. Also document the existing assumption that boot media should access the COREBOOT region (and not any other potentially existing fmap region containing a CBFS). Change-Id: I08254e4510f71edf99c2c8b56ac8f92008727c4a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14572 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-03arch/x86: Drop CBFS_BASE_ADDRESSPatrick Georgi
It's unused. Change-Id: I50af2b50d2c5a7a24afe9099c5c01d17ce54a6c9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14569 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-03southbridge/amd: Drop HUDSON_FWM_INSIDE_CBFSPatrick Georgi
It's unused. Change-Id: I853702e40dcab9f193b2a3de7deeec80ab1d25f0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14568 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-03build system: remove CBFSTOOL_PRE1_OPTSPatrick Georgi
It isn't used anymore. Change-Id: Ie554d1dd87ae3f55547466e484c0864e55c9d102 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14567 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-02soc/intel/quark: Remove UPD parametersLee Leahy
Remove the UPD parameters to match QuarkFsp code. TEST=Build and run on Galileo Gen2 Change-Id: Ie4639d1f087cc2bc4387aa691eb66b640fe8faf9 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14451 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-02cpu/x86/mp_init: remove unused callback argumentsAaron Durbin
The BSP and AP callback declarations both had an optional argument that could be passed. In practice that functionality was never used so drop it. Change-Id: I47fa814a593b6c2ee164c88d255178d3fb71e8ce Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14556 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-02drivers/intel/fsp1_1: fix linking romstage when SEPARATE_VERSTAGE usedAaron Durbin
The skylake-based Chromebooks use a separate verstage which runs just after bootblock and prior to romstage. However, that config is not enabled for coreboot.org so when C_ENVIRONMENT_BOOTBLOCK changes were done it wasn't observed that the Chromebook config failed because 2 _start symbols were present. Remedy this failure by using the common car_stage_entry symbol for taking over control flow. Change-Id: I3f29b90ba8e3786b2106a34e49e6d1f9831dcc7c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14549 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-05-02arch/x86/assembly_entry: allow early post CAR stages to use common codeAaron Durbin
The skylake-based Chromebooks use a separate verstage which runs just after bootblock and prior to romstage. The normal path for romstage would be to reload the gdt, however in the previously described scenario has verstage performing that work. Therefore, provide that path under those conditions. The only difference from the C_ENVIRONMENT_BOOTBLOCK scenario is that the stack should not be reloaded since there's no way to know the top of the stack. Change-Id: Ic39ab52a856233d3042ac02a15ae4816ddfe07c7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14548 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-05-02arch/x86/asembly_entry: reorder conditional stage entry macrosAaron Durbin
The path that just clears CAR_GLOBAL variables and jumps to the stage entry point needs another condition for separate verstage just after bootblock. However, the current conditional is a negative conditional so swap the logic around to make it easier to extend. Change-Id: Iab6682498054715a6eaa0476390da6355238b9bc Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14547 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-05-02lib/coreboot_table: use the architecture dependent table sizeAaron Durbin
Utilize the architecture dependent coreboot table size value from <arch/cbconfig.h> Change-Id: I80d51a5caf7c455b0b47c380e1d79cf522502a4c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14455 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-05-02arch: introduce architecture dependent common variablesAaron Durbin
Stefan and others have discussed their interest in only including options in Kconfig that are directly associated with building a coreboot image. There are variables that are architecture dependent that are utilized in the coreboot infrastructure. To meet that goal, introduce <arch/cbconfig.h> header file which defines variables for the coreboot infrastructure that are architecture dependent but utilized in common infrastructure. Change-Id: Ic4cb9e81bab042797539dce004db0f7ee8526ea6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14454 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-05-02nb/amd/mct_ddr3: Only initialize ECC bits onceTimothy Pearson
The ECC check bits of all ECC DIMMS were inadvertently initialized twice in the same routine, significantly delaying startup. Part of this was related to an obsolete MCA workaround that has been fixed through multiple commits, therefore the workaround is no longer needed. Only initialize the ECC check bits once. Change-Id: I90ac1147d9b006794d29b866a9cb5b7ead8f01e7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14503 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-02x86/memlayout.h: Do not include data/bss sections in C_ENVIRONMENT_BOOTBLOCKFurquan Shaikh
C_ENVIRONMENT_BOOTBLOCK on x86 is like romstage and uses cache-as-ram separately. It does not use any data/bss sections. Change-Id: I8957f467f01e754fa2d95783466a01daa6c4e51a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14533 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-05-01mb/emulation/*/board_info.txt: Update QEMU URLJonathan Neuschäfer
Change-Id: If4d57c7898c0de20035533dccd4554f45a71d5d1 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14525 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-05-01nb/amd/mct_ddr3: Warn if MaxRdLatency training fails on Family 15hTimothy Pearson
Change-Id: Idb948acd1a508379f600fbd2fd40fb26b7571d7c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14545 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01nb/amd/mct_ddr3: Stop receiver enable cycle training after window foundTimothy Pearson
During receiver enable cycle training on Family 15h the entire range of possible delays is searched, even though the single passing window is often found nearly immediately. Skip the remainder of the delay range after the passing window has been located. Change-Id: If98217fa8e7de77366762d3c7bb01049a1dc080f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14544 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01nb/amd/mct_ddr3: Do not constantly reset read data timing registers to 0Timothy Pearson
During DQS receiver enable cycle training on Family 15h platforms the read data timing registers were inadvertently set to zero on every lane training attempt. Ensure that the read data timing registers are correctly set after each lane is trained in receiver enable cycle training. This allows more than one RDIMM to function on a given DCT channel. Change-Id: I87d732f0383e9785a73b57e6f48855f3e872f1f9 Tested-On: ASUS KGPE-D16 Tested-With: 1x Opteron 6262HE Tested-With: 4x Crucial 36KSF1G72PZ-1G6M1 (slots A2 / A1 / B2 / B1) Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14543 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01nb/amd/mct_ddr3: Skip nibble training when current DIMM is not x4Timothy Pearson
Change-Id: I1f5b024606093dc81de3f3d69b7a43e20141b709 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14542 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01nb/amd/mct_ddr3: Fix x4 DIMM receiver enable training on Fam15hTimothy Pearson
The existing Family 15h receiver enable training code stored temporary delay values in the wrong variables, leading to the requisite averaging of delays across nibbles not being applied. This in turn made x4 DIMMs less stable than they should have been. Store temporary nibble delay values in a dedicated array. Change-Id: Ic5da898af7d689db4110211f89b886ccdbb5f78f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14541 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-30lib/reg_script: Allow multiple independent handlersLee Leahy
Remove the platform_bus_table routine and replace it with a link time table. This allows the handlers to be spread across multiple modules without any one module knowing about all of the handlers. Establish number ranges for both the SOC and mainboard. TEST=Build and run on Galileo Gen2 Change-Id: I0823d443d3352f31ba7fa20845bbf550b585c86f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14554 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-04-30lib/regscript: Add exclusive-or (xor) supportLee Leahy
Add xor support which enables toggling of a bit: * REG_SCRIPT_COMMAND_RXW enum value * REG_*_RXW* macros to support using REG_SCRIPT_COMMAND_RXW * REG_*_XOR* macros to support using REG_SCRIPT_COMMAND_RXW * reg_script_rxw routine to perform and/xor operation * case in reg_script_run_step to call reg_script_rxw TEST=Build and run on Galileo Gen2 Change-Id: I50a492c7c2643df5dc2d2fa7113e3722c1e480c7 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14495 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-30soc/apollolake: Prevent PMC BAR reassignment during resource allocationHannah Williams
Change-Id: Ie8e21e62ecd25f3c620a57c24948411c14c1e111 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14315 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-29soc/intel/apollolake: clarify Fast SPI CS2 pad configurationAaron Durbin
The pad for CS2 of the Fast SPI interface needs to be configured for automatic MMIO translation when a SPI TPM is utilized. Instead of unconditionally configuring that pad under LPC_TPM provide a explicit Kconfig for a mainboard to select. Change-Id: Ia94b90e12d71a4b849359188a853f7e036cc583b Signed-off-by: Aaron Durbin <adurbin@chormium.org> Reviewed-on: https://review.coreboot.org/14531 Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Tested-by: build bot (Jenkins)
2016-04-29nb/intel/sandybridge/raminit: fix regression "always use mrccache"Patrick Rudolph
Fix regression introduced by: Ib48fe8380446846df17d37b22968f7d4fd6b9b13 Don't run channel_test on S3 resume as it overrides memory that might be in use. Fixes MCE events reported by the GNU/Linux kernel that low memory has been modified. Reset on failed s3 resume. Change-Id: Ibadea286619c7906225f86a93aaa0b4caf26cabe Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14439 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-29siemens/mc_bdx1: Add new mainboard.Werner Zeh
Add new mainboard for MC BDX1 board which is based on Intel Camelback Mountain. This mainboard is an industry type board and has several Ethernet interfaces among with two USB3.0 connectors. It uses 24V DC power supply and has its own form factor which does not match any standard. This commit adds the new mainboard and prepares the Kconfig environment so that this board can be selected and generated. Although the generated image can boot into Linux and DOS, not all functions are implemented yet. Forthcoming commits will add more functionality. Change-Id: I29011cfd3b0d13bcf163223f657e02f69978e39a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/14516 Tested-by: build bot (Jenkins) Reviewed-by: York Yang <york.yang@intel.com>
2016-04-28nb/amd/mct_ddr3: Restart system on training failure instead of using die()Timothy Pearson
DIMM training can sporadically fail due to external influences or various errata. In these cases, restarting to retry training is a more appropriate response than halting the system and requiring manual intervention. Change-Id: Id49f7419f56e0640a84448cc06ecbaf62bed145e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14529 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-04-28Add board URLs for the RISC-V boardsJonathan Neuschäfer
Change-Id: Ifdf40986c2407d8c5b0097654b42e056f4498d39 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14518 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-28Fix "Spike RISCV" board nameJonathan Neuschäfer
Change-Id: If0f835e69862a78433e7c1a34efa4706cc27b214 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14517 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-28fsp_baytrail: Fix missing "$" when using Kconfig switchWerner Zeh
To include gfx.c in ramstage, there is a Kconfig option (FSP_BAYTRAIL_GFX_INIT) which can be activated on demand. Unfortunately, the "$"-character is missing so that this switch is never active. Change-Id: I0c3c562b3caca53ac6510c2c5dc30e7f606f5ad0 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/14532 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 04:07:57 +0000