summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Expand)Author
2013-12-21exynos5420: Apply pwm const fix to the 5420 as wellGabe Black
2013-12-21exynos5250: Fix consts in the pwm codeGabe Black
2013-12-21falco: add rtd2132 settings to device treeAaron Durbin
2013-12-21rtd2132: implement full configurationAaron Durbin
2013-12-21Remove PS/2 keyboard initialization on resume from S3Martin Roth
2013-12-21Add simple hexdump functionStefan Reinauer
2013-12-21Pit: set PWM to external on ParadeRonald G. Minnich
2013-12-21Pit: move parade writes to mainboard.cRonald G. Minnich
2013-12-21peppy: Drive WLAN_DISABLE_L / BT_ON low in S3 and S5.Shawn Nematbakhsh
2013-12-21Added structure members x_mm and y_mm to edid decodingFurquan Shaikh
2013-12-21FUI: Fill in link_m and link_n valuesFurquan Shaikh
2013-12-21Slippy: remove unneeded code in i915io.cRonald G. Minnich
2013-12-21slippy/falco/peppy: Route USB to XHCI on resumeDuncan Laurie
2013-12-21haswell: Add pei_data field for USB routingDuncan Laurie
2013-12-21haswell boards: fix SATA interrupt in ACPIDuncan Laurie
2013-12-21haswell: Update microcode revisionDuncan Laurie
2013-12-21slippy/falco/peppy: update ACPI C-state settingsDuncan Laurie
2013-12-21lynxpoint: Avoid any ME device communication in S3 pathDuncan Laurie
2013-12-21lynxpoint me: add support for mbp clear wait in finalize stepDuncan Laurie
2013-12-21lynxpoint xhci: Add ACPI D0/D3 workaroundsDuncan Laurie
2013-12-21Revert "lynxpoint: Move ME lock down to ramstage"Duncan Laurie
2013-12-21lynxpoint: power management setup tweakDuncan Laurie
2013-12-21SLIPPY: final changes for FUIRonald G. Minnich
2013-12-21peppy: Duplicate SPD data for 2GB configurations.Shawn Nematbakhsh
2013-12-21chromeos: Check for recovery reason code in shared dataDuncan Laurie
2013-12-21haswell boards: Use PECI temp sensor id 0Duncan Laurie
2013-12-21falco: Enable RTD2132 spread spectrum at 1.0%Duncan Laurie
2013-12-21rtd2132: Add driver for Realtek RTD2132 LVDS bridgeDuncan Laurie
2013-12-21lynxpoint: Add LPT-LP device id and smbus_write_byteDuncan Laurie
2013-12-21bolt: make the gpio interrupts edge sensitiveAaron Durbin
2013-12-20armv7: Remove SYS_TEXT_BASE config.Hung-Te Lin
2013-12-19ec/lenovo/h8: Enable 3G modemVladimir Serbinenko
2013-12-18lynxpoint: Don't write to non-existent EHCIDuncan Laurie
2013-12-17cpu/intel: Do not rely on CBFS microcode having a terminatorAlexandru Gagniuc
2013-12-17device/dram/ddr3: Move CRC calculation in a separate functionAlexandru Gagniuc
2013-12-16X60/T60: Implement "next display output" button.Vladimir Serbinenko
2013-12-16qemu/videoinit: Set required fields in fake EDIDVladimir Serbinenko
2013-12-15lenovo/x201: Add support for Lenovo X201 (Calpella-based laptop)Vladimir Serbinenko
2013-12-15ec/lenovo/h8: Fix peripheral init without CMOS configVladimir Serbinenko
2013-12-15intel/cougar_canyon2/Kconfig: Remove HAVE_ACPI_RESUME as S3 is unsupportedPaul Menzel
2013-12-14drivers/pc80: Add ACPI description.Vladimir Serbinenko
2013-12-13cpu/amd: Remove error messages on non-matching microcode patchesKyösti Mälkki
2013-12-13cpu: Rename CPU_MICROCODE_IN_CBFS to SUPPORT_CPU_UCODE_IN_CBFSAlexandru Gagniuc
2013-12-12EDID: add fields specialized to the needs of framebuffersRonald G. Minnich
2013-12-12bolt: Initial mainboard commitDuncan Laurie
2013-12-12HDA: Enable Mini-HDA and fix up PCH-HDA initDuncan Laurie
2013-12-12slippy/falco/peppy: make GPIO interrupts be edge triggeredDuncan Laurie
2013-12-12EXYNOS5250: be less chatty at critical momentsRonald G. Minnich
2013-12-12falco: drive WLAN_DISABLE_L low in S3 and S5Aaron Durbin
2013-12-12exynos5250: Correct DDR3 Phy-reset value names.Hung-Te Lin
2013-12-12haswell: Fix up GPU power management setupDuncan Laurie
2013-12-12haswell: Export functions for CPU family+model and steppingDuncan Laurie
2013-12-12exynos5420: Setup clocks for MMC bus controller.Hung-Te Lin
2013-12-12peppy: Add backward-compatible RAM_ID table.Shawn Nematbakhsh
2013-12-12Peppy: Update Realtek ALC283 verb tableMartin Roth
2013-12-12chromeec: Allow get_board_version to be called from romstage.Shawn Nematbakhsh
2013-12-12falco: fix usb port settingsDuncan Laurie
2013-12-12Log device path during resource allocationDuncan Laurie
2013-12-12haswell: Update ULT microcode to rev 14hDuncan Laurie
2013-12-12falco: Remove thermal thresholds that use CTDPDuncan Laurie
2013-12-12armv7: Fix dcache_clean_by_mva.Hung-Te Lin
2013-12-12PIT: remove a comment that is incorrect.Ronald G. Minnich
2013-12-12snow: Fix the edid data structure definition so depthcharge works again.Gabe Black
2013-12-12peppy: RAM_ID + storage changes for next build.Shawn Nematbakhsh
2013-12-12peppy: Disable audio codec enable GPIO in S3 + S5.Shawn Nematbakhsh
2013-12-09AMD boards: Fix includes for microcode updatesKyösti Mälkki
2013-12-09Refactor usage of walkcbfs to permit access to CBFS headersAlexandru Gagniuc
2013-12-07snprintf: lockless operationVladimir Serbinenko
2013-12-07vtxprintf: Introduce vtxdprintf for the ease of closuresVladimir Serbinenko
2013-12-07haswell: VR controller configurationAaron Durbin
2013-12-07Add kernel-derived support functions for DDI.Ronald G. Minnich
2013-12-07haswell: Add ACPI support for Controllable TDPDuncan Laurie
2013-12-07haswell: Misc power management setup and fixesDuncan Laurie
2013-12-07peppy: Enable power limiting for thermal controlDuncan Laurie
2013-12-07elog: handle ROM_SIZE differences from detected flash sizeAaron Durbin
2013-12-07Correct file permissions.Idwer Vollering
2013-12-07src/vendorcode/amd: remove Visual Studio remnants.Idwer Vollering
2013-12-06arch/x86: Do not run UPDATE-FIT if we don't include microcodeAlexandru Gagniuc
2013-12-06usbdebug: Hide irrelevent options from menuconfigKyösti Mälkki
2013-12-06butterfly: Fix build without ChromeOSKyösti Mälkki
2013-12-06qemu: fix GENERATE_ACPI_TABLES=n in fw_cfg.cGerd Hoffmann
2013-12-06Add in the Makefile bits for the new intel gma driverRonald G. Minnich
2013-12-05FUI: add intel_dp driver derived from kernel functionsRonald G. Minnich
2013-12-05haswell: pull in the init code for FUIRonald G. Minnich
2013-12-05google/link: use the new edid functions when in FUI modeRonald G. Minnich
2013-12-05lynxpoint: Update LPT-LP PM settingsDuncan Laurie
2013-12-05lynxpoint: enable clock gatingAaron Durbin
2013-12-05lynxpoint: provide gpio_is_native()Aaron Durbin
2013-12-05lynxpoint: implement additional programming stepsStefan Reinauer
2013-12-05lynxpoint: disable pcie devices based on configAaron Durbin
2013-12-05peppy: Disable forced dev mode.Shawn Nematbakhsh
2013-12-05Fix Makefile to include all copies of the SPD sourcesDuncan Laurie
2013-12-05AMD Kabini: fix issue 'S3 fails to suspend after wake up from USB keyboard'Zheng Bao
2013-12-05AMD Kabini: Add ACPI sleep/wakeup calls for southbridgeZheng Bao
2013-12-05AMD IMC AGESA: Access the data in stack by correct lengthZheng Bao
2013-12-05cpu: Remove BOARD_MICROCODE_CBFS_GENERATE Kconfig optionAlexandru Gagniuc
2013-12-05intel/fsp_bd82x6x: Use correct type pointer for mainboard_smi_gpiAlexandru Gagniuc
2013-12-05qemu-armv7 CPU: Move Kconfig code into CPU directoryStefan Reinauer
2013-12-04lenovo/x60: Drop global oprom_is_loadedKyösti Mälkki
2013-12-04lumpy: Fix build without ChromeOSKyösti Mälkki
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 20:36:44 +0000