summaryrefslogtreecommitdiff
path: root/src/vendorcode
AgeCommit message (Collapse)Author
2019-05-25AGESA binaryPI: Add AGESA entry timestampsKyösti Mälkki
The call to timestamp_rescale_table() had to be moved before TS_AGESA_INIT_{POST/RESUME}_DONE to have that timestamp appear without rescaling. Change-Id: I71e09d3bc4c8657979d447b90fb6ac7cae959479 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-25AGESA f12 f14 vendorcode: Clean up extra CFLAGSKyösti Mälkki
Extra variable is no longer required here. Change-Id: I2a6839ee0349e3019de3b2a91f9e7bb1c435603d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31512 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-05-25AGESA: Move heap_status_name() implementationKyösti Mälkki
Place it within class libagesa to avoid including AGESA internal header heapManager.h in coreboot proper build CPPFLAGS. Change-Id: Iae86d6631d7a6ba6ea2588a53b292b435dfd7861 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31511 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-23AGESA binaryPI: Sync STRUCT_NAME definitionsKyösti Mälkki
While not implemented, copying the definitions from later AGESA/AMD.h to older helps us avoid lots of preprocessor directives. Change-Id: I34edc1ca23e9c063c4286273c53249ff0a953798 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31510 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-21binaryPI/00670F000: Remove AGESA.c fileKyösti Mälkki
Change-Id: Id48de8b2f6feb6c29d745140c872215faa32eb37 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31487 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-21soc/amd/common: Refactor AmdCreateStruct() useKyösti Mälkki
AmdCreateStruct() and AmdReleaseStruct() are equally bad when it comes to lack of correct function declarations for definitions found in vendorcode binaryPI/AGESA.c. Replace these with calls that go through the common module_dispatch() functions. Change-Id: I611bcbe2a71fb65c8eb759a9dc74cbd9cb74136e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31486 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-20src/vendorcode/amd/agesa/f15tn: Update microcode to version 0x600111F 2018-03-05Mike Banon
This microcode update for CPU IDs 0x610F01/0x610F31 improves system stability: in particular, fixes Xen hardware virtualization freezes. Also it attempts to patch some Spectre-related security vulnerabilities. This new microcode has been tested by multiple coreboot community members and found working perfectly. Old version: 0x600110F [2012-01-11] replaced by New version: 0x600111F [2018-03-05] Change-Id: Ied5da0ff85abb63c2db2eeafd051b8e00916d961 Signed-off-by: Mike Banon <mikebdp2@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/28273 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: <awokd@danwin1210.me> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-20src/vendorcode/amd/agesa/f16kb: Update microcode to version 0x7000110 2018-02-09Mike Banon
This microcode update for CPU ID 0x700F01 improves system stability: in particular, fixes Xen hardware virtualization freezes. Also it attempts to patch some Spectre-related security vulnerabilities. This new microcode has been tested by multiple coreboot community members and found working perfectly. Old version: 0x700010B [2013-07-09] replaced by New version: 0x7000110 [2018-02-09] Change-Id: Iebe6e54d922378a8a1feb97f37b08ac50c8234b2 Signed-off-by: Mike Banon <mikebdp2@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/28370 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-18vendorcode/google/chromeos: Correct VPD field for MAC passthroughSimon Glass
The VPD field name is dock_passthrough, not dock_passthru. Fix it. (I assume there is no length limit) BUG=b:132689337 TEST=check that the feature can now be controlled by the associated enterprise policy Change-Id: Icc2b070313fde74447279cd6ccaa4e3eb6d119ee Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32839 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-09vendorcode/google/chromeos: Use explicit zero check in ACPI codeDuncan Laurie
The ASL 2.0 syntax for "!X" resolves to "LNot(X)" which will evaluate the object as an integer and turn into a boolean. This may not do the right thing if the object is actually a string and it can lead to unexpected behavior. Instead be specific about the object type and check for zero or an empty string depending on what is being returned. This fixes an issue where some VPD keys were causing the search to stop and miss subsequent entries. Change-Id: I1688842964f9c2f81ca31073da9c2d71a8c81767 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32694 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-06Fix code that would trip -Wtype-limitsJulius Werner
This patch fixes up all code that would throw a -Wtype-limits warning. This sometimes involves eliminating unnecessary checks, adding a few odd but harmless casts or just pragma'ing out the warning for a whole file -- I tried to find the path of least resistance. I think the overall benefit of the warning outweighs the occasional weirdness. Change-Id: Iacd37eb1fad388d9db7267ceccb03e6dcf1ad0d2 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32537 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06soc/amd/common: Introduce module_dispatch()Kyösti Mälkki
This change removes all the separate entrypoint dispatch functions as they all share the same pattern. Furthermore, none of the function definitions under vendorcode binaryPI/AGESA.c file have proper declarations, the ones compiler picks up from AGESA.h are for the internal implementations and with sanely organized headerfiles would not be exposed outside the build of AGESA at all. Change-Id: I0b72badc007565740c93b58743cfd048e8b42775 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31485 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-23coreboot: Run mainboard specific code before Cr50 resetKeith Short
When coreboot checks the TPM and key-ladder state it issues a reboot of the Cr50 with a delay parameter. Older Cr50 code doesn't support the delay parameter and reboots immediately, which prevented coreboot from running the mainboard specific code needed for the AP to come back up. This change calls mainboard_prepare_cr50_reset() prior to sending the VENDOR_CC_IMMEDIATE_RESET command. This change also fixes a false error message from the coreboot log that indicated "Unexpected Cr50 TPM mode 3" when the Cr50 key ladder is disabled. BUG=b:130830178 BRANCH=none TEST=build coreboot on sarien and grunt platforms. TEST=Load Cr50 v3.15, run 'gsctool -a -m disable; reboot'. Verify corebot send the VENDOR_CC_IMMEDIATE_RESET command and that the AP boots normally. Verify event log shows "cr50 Reset Required" TEST=Force Cr50 automatic update. Verify event log shows "cr50 Update Reset". Change-Id: Ib05c9cfde8e87daffd4233114263de5b30822872 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-23soc/amd/common: Remove AmdReadEventLog()Kyösti Mälkki
Parameter passing is incorrect here, it should pass complete StdHeader instead of attempting to fill in HeapStatus that should be treated as a field private to AGESA, based on where it is defined in the header files. Furthermore the while() loop did not evaluate the return value. Feature can be brought back at a later date after someone verifies it actually works correctly across different stages. Change-Id: Ib243b275f8700ecaeb330772c795d305c61899c5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31484 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-07vc/amd/agesa/f14: Add missing break statementJacob Garber
We do not want to ASSERT(FALSE). Found-by: Coverity Scan, CID 1241850 (MISSING_BREAK) Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: Ia08bb519cdb5ef5d2a79898706c7fac7e58adf3f Reviewed-on: https://review.coreboot.org/c/coreboot/+/32180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-04-04Make common macros double-evaluation safeJulius Werner
I just got hit by a double-evaluation bug again, it's time to attempt to fix this once more. Unfortunately there are several issues that don't make this easy: - bitfield variables don't support typeof() - local macro variables that shadow others trigger -Werror=shadow - sign warnings with integer literal and unsigned var in typeof-MIN() - ({ statement expressions }) can not be used outside functions - romcc doesn't support any of the fancy GCC/clang extensions This patch tries to address all of them as far as possible with macro magic. We don't have the technology to solve the bitfield and non-function context issues yet (__builtin_choose_expr() still throws a "no statement expression outside a function" error if it's only in the branch that's not chosen, unfortunately), so we'll have to provide alternative macros for use in those cases (and we'll avoid making __ALIGN_MASK() double-evaluation safe for now, since it would be annoying to do that there and having an alignment mask with side effects seems very unlikely). romcc can continue using unsafe versions since we're hopefully not writing a lot of new code for it. Sign warnings can be avoided in literal/variable comparisons by always using the type of the variable there. Shadowing is avoided by picking very explicit local variable names and using a special __COUNTER__ solution for MIN() and MAX() (the only ones of these you're likely to nest). Also add DIV_ROUND_UP() to libpayload since it's a generally quite useful thing to have. Change-Id: Iea35156c9aa9f6f2c7b8f00991418b746f44315d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-28chromeos: remove remaining dev switch referencesJoel Kitching
As part of chromium:942901, physical dev switch functionality is being deprecated. Remove remaining references as well as helper macros. BUG=chromium:942901 TEST=Build locally TEST=make clean && make test-abuild BRANCH=none Change-Id: Ib4eec083eb76d41b47685701f9394c684ddc6b37 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-03-25vendorcode/cavium/bdk/libdram: Add missing commaJacob Garber
Fixes Coverity CID 1393957 (Missing Comma) Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I63ee47f870081bcf081bcf6dcec764e830b4ab75 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-03-15vendorcode/intel/fsp/fsp2_0/cnl: Update FSP header files for CannonlakeJohn Zhao
Update FSP header files for Cannonlake platform. Change-Id: I7f1a1f61c32510062a440c14a897e95bed7a9718 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-03-12vendorcode/intel/fsp/fsp2_0/cml: Update FSP header files for CometlakeRonak Kanabar
Update header files for FSP for cometlake platform version 1065 BUG=b:125439832 Change-Id: I1eb679f842915f256137a33c09e20f5881d5143d Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-03-11vendorcode/google/chromeos: Fix AMAC return typeDuncan Laurie
The r8152 kernel driver is expecting the AMAC() method to return a raw buffer, not a string. To fix this simply remove the ToString() in the return statement that was converting the buffer to a string. BUG=b:123925776 Change-Id: I7cd4244a1ccc7397d5969b817a52ea48867b4d17 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31807 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-06vendorcode/intel/fsp/fsp2_0/cml: Update FSP header files for CometlakeSubrata Banik
Update header files for FSP for cometlake platform version 1065 Change-Id: I7be7535975b442490cc77c9c1dca4ef7a2d43a58 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2019-03-04device/mmio.h: Add include file for MMIO opsKyösti Mälkki
MMIO operations are arch-agnostic so the include path should not be arch/. Change-Id: I0fd70f5aeca02e98e96b980c3aca0819f5c44b98 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31691 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04vendorcode/google/chromeos: Support MAC address passthru policyDuncan Laurie
This change adds support for providing a MAC address that can be used by the OS network drivers to change the MAC address that a NIC uses. The Realtek r8152 driver in the Linux kernel supports a MAC address passthru feature which can result in the dock ethernet port using the same MAC address that is assigned to the internal NIC. This is done by calling an ACPI method at \_SB.AMAC() which returns a formatted string containing the MAC address for the dock to use. The Linux kernel implementation can be found at drivers/net/usb/r8152.c:vendor_mac_passthru_addr_read() This is implemented specifically for Chrome OS as it relies on VPD to determine the MAC address to supply. The policy which controls where the dock MAC address comes from is written into RW_VPD property "dock_passthru": "dock_mac" or empty: Use MAC address from RO_VPD value "dock_mac" "ethernet_mac0": Use MAC address from RO_VPD value "ethernet_mac0" "builtin": existing dock MAC address (return nothing) The MAC address in VPD is the standard format AA:BB:CC:DD:EE:FF and it must be converted into the string format expected by the OS which involves some string manipulation which ACPI is not great at handling. BUG=b:123925776 TEST=this was tested on a sarien board by setting the VPD keys to their expected values and observing if the AMAC() method returns the expected string. Change-Id: I3335e5d924155431e299844e2aaace62168294e0 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-03-04vendorcode/google/chromeos: Add support for reading VPD in ACPIDuncan Laurie
This ACPI device presents an interface that allows other ACPI devices or methods to read VPD strings. The VPDF() method is provided the VPD partition to look in, and the name of the VPD key to find and it will return the VPD string if it exists. For example: VPD.VPDF ("RO", "serial_number") BUG=b:123925776 TEST=this was tested on a sarien platform by adding ACPI code that searches for a VPD key and returns the value it finds, and then setting that VPD string from the OS with the Chrome OS 'vpd' utility to ensure the ACPI method returns the correct value. Change-Id: I4668f66d7f7f364ac8c3b064d406b24135abb0f6 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-03-04vendorcode/google/chromeos: Save VPD region into GNVSDuncan Laurie
Store the memory address of VPD region start and length for the memory mapped RO_VPD and RW_VPD into GNVS so they can be used by ACPI code. BUG=b:123925776 TEST=boot on sarien and verify VPD start/length in GNVS Change-Id: I39073a9d78f5ff60bfe088860c087a5167f05fdf Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-02-28vendorcode/intel/fsp/fsp2_0/cml: Add FSP header files for CometlakeMaulik V Vaghela
Adding header files for FSP for cometlake platform version 1034 Change-Id: I734316445dda5b1feb4098ce3c58b6dd8ce2d272 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/31529 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2019-02-25AGESA vendorcode: Define libagesa rule just onceKyösti Mälkki
No reason to keep this rule in per-family directory. Change-Id: I6bfc9a277674077774c4cb398f8add5e4fa99c69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31509 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-25vendorcode/siemens: Cache currently opened hwi file nameWerner Zeh
On every call of hwilib_find_blocks() the CBFS file will be mapped and the contents are parsed to get the offsets for every single block. This is not needed if the CBFS file name is the same for the different calls. This patch adds a storage for the currently opened CBFS file name in CAR_GLOBAL and checks on each call if the file to open is already open. If yes, the file will not be mapped again which saves execution time. Test=Booted mc_tcu3, mc_bdx1 and mc_apl1 and verified that hwinfo.hex is only mapped once across several following hwilib_find_blocks() calls. In addition a test was done to ensure that files with different names get mapped correctly. Change-Id: Id69e0f6c914c2b8e4551fd8a4fb7d452d176afb3 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/31518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-02-22symbols.h: Add macro to define memlayout region symbolsJulius Werner
When <symbols.h> was first introduced, it only declared a handful of regions and we didn't expect that too many architectures and platforms would need to add their own later. However, our amount of platforms has greatly expanded since, and with them the need for more special memory regions. The amount of code duplication is starting to get unsightly, and platforms keep defining their own <soc/symbols.h> files that need this as well. This patch adds another macro to cut down the definition boilerplate. Unfortunately, macros cannot define other macros when they're called, so referring to region sizes as _name_size doesn't work anymore. This patch replaces the scheme with REGION_SIZE(name). Not touching the regions in the x86-specific <arch/symbols.h> yet since they don't follow the standard _region/_eregion naming scheme. They can be converted later if desired. Change-Id: I44727d77d1de75882c72a94f29bd7e2c27741dd8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/31539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-02-14binaryPI: Fix cache coherency use for AP CPUsKyösti Mälkki
The memory between _car_region_start .. _car_region_end has to be set up as WB in MTRRs for all the cores executing through bootblock, verstage and romstage. Otherwise global variables may fail on AP CPUs. Fixes combination of CBMEM_CONSOLE=y with SQUELCH_EARLY_SMP=n, which previously did not boot at all for some cases. Change-Id: I4abcec90c03046e32dafcf97d2f7228ca93c5549 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/26115 Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-13coreboot: check Cr50 PM mode on normal bootKeith Short
Under some scenarios the key ladder on the Cr50 can get disabled. If this state is detected, trigger a reboot of the Cr50 to restore full TPM functionality. BUG=b:121463033 BRANCH=none TEST=Built coreboot on sarien and grunt platforms. TEST=Ran 'gsctool -a -m disable' and reboot. Verified coreboot sends VENDOR_CC_IMMEDIATE_RESET command to Cr50 and that the Cr50 resets and then the platform boots normally. TEST=Performed Cr50 rollback to 0.0.22 which does not support the VENDOR_CC_TPM_MODE command, confirmed that platform boots normally and the coreboot log captures the unsupported command. Tested-by: Keith Short <keithshort@chromium.org> Change-Id: I70e012efaf1079d43890e909bc6b5015bef6835a Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/31260 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-02-11mb/intel/galileo: Drop the FSP1.1 optionArthur Heymans
This board is EOL and has FSP2.0 support, so drop the older version. Change-Id: If5297e87c7a7422e1a129a2d8687fc86a5015a77 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-02-01vendorcode/google/chromeos: Use ACPI GPIO pin when possibleDuncan Laurie
Have the generated Chrome OS ACPI GPIO table provide the ACPI GPIO pin number instead of the raw GPIO number when possible. This is necessary if the OS uses a different numbering for GPIOs that are reported in ACPI than the actual underlying GPIO number. For example, if the SOC OS driver declares more pins in an ACPI GPIO bank than there are actual pins in the hardware it will have gaps in the number space. This is a reworked version of 6217e9beff16d805ca833e79a2931bcdb3d02a44 which does not try to convert CROS_GPIO_VIRTUAL. BUG=b:120686247 TEST=pass firmware_WriteProtect test on Sarien Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I3ad5099b7f2f871c7e516988f60a54eb2a75bef7 Reviewed-on: https://review.coreboot.org/c/31080 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-30soc/intel/apollolake: Sync fsp upd structure updateJohn Zhao
FSP 2.0.9 provides UPD interface to adjust integrated filter value, usb3 LDO and pmic vdd2 voltage. Change coreboot upd structure to sync with fsp 2.0.9 release. BUG=b:123398358 CQ-DEPEND=CL:*817128 TEST=Verified yorp boots to kernel. Change-Id: I3d17dfbe58bdc5222378459723da8e9ac0573510 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/31131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-25vendorcode/google/chromeos: Add mainboard hook before cr50 updateDuncan Laurie
In order to allow the mainboard to configure the system before a cr50 initiated update reset add a weak function that the mainboard can override if necessary. This will allow a board that would otherwise be configured to stay off after an EC reset to instead power up after the reset and not end up in a shut down state after a cr50 update. BUG=b:121380403 TEST=update cr50 firmware on sarien and reboot Change-Id: I11f9e8c9bfe810f69b4eaa2c633252c25004cbd0 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31057 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-17vendorcode/{amd,cavium,intel}: Remove trailing whitespacePeter Lemenkov
find src -type f "!" -regex ".*\.\(vbt\|bin\)" -exec sed -i -e "s,\s\+$,,g" {} \; Change-Id: Ic70cf8524dcd0a0f5700f91b704b3c545dd8a01a Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/30959 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-15vendorcode/intel/fsp1_0/broadwell_de: Use FSP from 3rdparty/fspPatrick Rudolph
Default to FSP binary and headers shiped in 3rdparty/fsp. * Drop headers and code from vendorcode/intel/fsp1_0/broadwell_de * Select HAVE_FSP_BIN to build test the platform * Fetch FSP repo as submodule * Make FSP_HEADER_PATH known from FSP2.0 useable on FSP1.0 * Introduce FSP_SRC_PATH for FSP source file * Add sane defaults for FSP_FILE Tested on wedge100s. Change-Id: I46f201218d19cf34c43a04f57458f474d8c3340d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
2019-01-14[RFC]util/checklist: Remove this functionalityArthur Heymans
It was only hooked up for galileo board when using the obsolete FSP1.1. I don't see how it can be useful... Change-Id: Ifd7cbd664cfa3b729a11c885134fd9b5de62a96c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30691 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14AGESA/PI: replace HUDSON_DISABLE_IMC with HUDSON_IMC_ENABLEMike Banon
Only a few boards are using IMC for the onboard fan control, so regarding the availability of IMC selection it should be opt-in, not opt-out. Also, select HUDSON_IMC_ENABLE for Gizmo 2 because Gizmo 2 could use IMC for the onboard fan control. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I3590b13c3b155405d61e373daf1bd82ca8e3bd16 Reviewed-on: https://review.coreboot.org/c/30756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-12-21chromeos: Provide watchdog support in verstageYou-Cheng Syu
Some boards may want to initialize watchdog in verstage instead of bootblock or ramstage, so we need to add watchdog support in verstage. BRANCH=none BUG=b:120588396 TEST=build successfully Change-Id: I13ab84f54d576a0e8c723070b5d9aadd9d63f87c Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/30329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-12-18Fix typos involving "the the"Jonathan Neuschäfer
Change-Id: I179264ee6681a7ba4488b9f1c6bce1a19b4e1772 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/30160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-17Revert "vendorcode/google/chromeos: Get ACPI pin from GPIO library"Duncan Laurie
This reverts commit 6217e9beff16d805ca833e79a2931bcdb3d02a44. Reason for revert: boards with CROS_GPIO_VIRTUAL selected in absence of dedicated recovery GPIO pin is die-ing now at gpio.c file line. 127 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: Ief20681b2a7ed4d15fd2d637ae034d54a96b2d6f Reviewed-on: https://review.coreboot.org/c/30278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-17vendorcode/google: support multiple SAR filenamesJustin TerAvest
Using a fixed filename only allows for one SAR configuration to be checked into CBFS. However, we have devices with shared firmware that would desire separate SAR configurations. This change allows boards to define a function to select one of multiple files stored in CBFS to be used. BUG=b:120958726 BRANCH=octopus TEST=build Signed-off-by: Justin TerAvest <teravest@chromium.org> Change-Id: Ib852aaaff39f1e9149fa43bf8dc25b2400737ea5 Reviewed-on: https://review.coreboot.org/c/30222 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-14vendorcode/google/chromeos: Get ACPI pin from GPIO libraryDuncan Laurie
If the generic GPIO library is enabled the code that generates the GPIO table in ACPI should attempt to get the GPIO pin value from the gpio_acpi_pin() function. BUG=b:120686247 TEST=Tested on Sarien board to ensure that GPIO pin exported by Chrome OS for the Write Protect signal is correct. Change-Id: I267694b576009f79bacac6eda5f32bbf51742d78 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-11-28vendorcode/cavium: Supply bdk_pop and bdk_dpop definitionsMartin Roth
This is an issue found by the new builder image and needs to be fixed before we can upgrade to the new toolchain version: In function `bdk_dram_get_size_mbytes': src/vendorcode/cavium/bdk/libbdk-dram/bdk-dram-size.c:198: undefined reference to `bdk_pop' In function `bdk_get_num_cores': /src/vendorcode/cavium/include/bdk/libbdk-hal/bdk-utils.h:164: undefined reference to `bdk_dpop' In function `init_octeon3_ddr3_interface': src/vendorcode/cavium/bdk/libdram/dram-init-ddr3.c:7550: undefined reference to `bdk_pop' Change-Id: Ibf71e4556014795bfedceccfe3837dc9deb29ad2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/29851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-11-23soc/intel/common: Bring DISPLAY_MTRRS into the lightNico Huber
Initially, I wanted to move only the Kconfig DISPLAY_MTRRS into the "Debug" menu. It turned out, though, that the code looks rather generic. No need to hide it in soc/intel/. To not bloat src/Kconfig up any further, start a new `Kconfig.debug` hierarchy just for debug options. If somebody wants to review the code if it's 100% generic, we could even get rid of HAVE_DISPLAY_MTRRS. Change-Id: Ibd0a64121bd6e4ab5d7fd835f3ac25d3f5011f24 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29684 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-19northbridge/intel/fsp_*: Remove legacy SoCszaolin
* Remove FSP Sandy/Ivybrige which are unused. * Open Source implementation isn't final but good enough to replace FSP version. * For new ports use NORTHBRIDGE_INTEL_IVYBRIDGE and NORTHBRIDGE_INTEL_SANDYBRIDGE Change-Id: I7b6bc4bfdd0481c8fe5b2b3d8f8b2eb9aa3c3b9e Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/29402 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-08security/vboot: Add selection for firmware slots used by VBOOTPhilipp Deppenwiese
Make the firmware slot configuration in VBOOT selectable. The following three modes are available: -RO only -RO + RW_A -RO + RW_A + RW_B The mode "RO only" is the lowest mode with no safety during update. You can select either RW_A or RW_AB via Kconfig which will add the selected parttions to the final image. Change-Id: I278fc060522b13048b00090b8e5261c14496f56e Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/27714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-08soc/intel/apollolake: Improve cold boot and S3 resumeJohn Zhao
FSP 2.0.7.1 provides UPD interface to execute IPC command. Configure PmicPmcIpcCtrl for PMC to program PMIC PCH_PWROK delay from default 100ms to 10ms to improve cold boot and S3 resume performance. BUG=b:118676361 CQ-DEPEND=CL:*703187 TEST=Verified system_resume_firmware_ec time reduction. Change-Id: I05656c9083a855112120b7f1b0ec01c42f582409 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/29363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-01sb/intel/lynxpoint: Include <stdint.h> to fix compilation errorsTristan Corrick
If the file `southbridge/intel/lynxpoint/nvs.h` is included in a file that does not already include <stdint.h>, compilation errors result. Adding the necessary <stdint.h> inclusions fixes compilation for an ASRock H81M-HDS. Change-Id: Id0d14705282cc959146e00dd47754ee8a2e8e825 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/29389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-10-26vendorcode/intel/fsp/icelake: Add icelake FSP header file templateRizwan Qureshi
icelake FSP is still under development and hence the FSP header files and binaries are not available on github. Meanwhile add basic header files required to compile the SoC and mainboard with FSP2.0. BUG=None BRANCH=None TEST=Build for icelake_rvp board successfull. Change-Id: I9ab8f180b572ec553e7531f7483d091f6897c462 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/29163 Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-24intel/fsp: Fix license header for MeminfoHob.hLijian Zhao
Current header file included a proprietary license, fix that by using same license shared on public fsp release on fsp. BUG=https://ticket.coreboot.org/issues/177 TEST=N/A Change-Id: I129c8a465e702d3885d994f4fab352b34d46f177 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/29224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ian Kelling <ian@iankelling.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-10-23src: Typo fix (cosmetic)Peter Lemenkov
Change-Id: I81985bd2836bdeb369587f170504a8a048ee496b Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29196 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-22reset: Provide new single-function reset APINico Huber
board_reset() replaces the existing common reset API. There is no common distinction between reset types across platforms, hence, common code could never decide which one to call. Currently only hard_reset() is used by common code. We replace these calls and provide a fall-back to the current hard_reset() implemen- tation. The fall-back will be removed along with hard_reset() after the transition of all boards. Change-Id: I274a8cee9cb38226b5a0bdff6a847c74ef0b3128 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29047 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-15vc/google/chromeos/ec: remove EC hibernate in cr50 update pathAaron Durbin
More platforms are not able to hibernate under certain circumstances, such as when AC is plugged. This original path was conservatively put in to prevent potential damage when cr50-update-caused asynchronous resets occur. Julius' compelling argument that async resets from recovery mode requests should have enough coverage of the design over the course of project development. Remove the hibernate path and assume all is well going forward. Change-Id: I37121e75ff4e6abcb41d8534a1eccf0788ce2ea2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/29076 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-12drivers/intel/fsp2_0: Hook up IntelFSP repoPatrick Georgi
With https://github.com/IntelFsp/FSP/pull/4 merged, this allows using Intel's FSP repo (that we mirror) to build a complete BIOS ifd region with a simple coreboot build, automatically drawing in headers and binaries. This commit covers Apollolake, Coffeelake, Skylake, and Kabylake. Skylake is using Kabylake's FSP since its own is FSP 1.1 and Kabylake's also supports Skylake. Another candidate (given 3rdparty/fsp's content) is Denverton NS, but it requires changes to coreboot's FSP bindings to become compatible. Cannonlake, Whiskeylake require an FSP release. Change-Id: I8d838ca6555348ce877f54e95907e9fdf6b9f2e7 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28593 Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08Move compiler.h to commonlibNico Huber
Its spreading copies got out of sync. And as it is not a standard header but used in commonlib code, it belongs into commonlib. While we are at it, always include it via GCC's `-include` switch. Some Windows and BSD quirk handling went into the util copies. We always guard from redefinitions now to prevent further issues. Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-28vendorcode/amd/pi/00670F00/Lib: Remove folderRichard Spiegel
Now that the last dependency was resolved, remove AmdLib folder. BUG=b:112525011 TEST=Build and boot grunt. Change-Id: Ibd9a20bc358742520138b9b01f76d7fd2fac92ab Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28742 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Charles Marslett <charles.marslett@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-26vendorcode/amd/pi/00670F00/Proc/PspBaseLib: Remove folderRichard Spiegel
Now that PspBaseLib is no longer used, fully remove the folder. BUG=b:116579642 TEST=Build grunt Change-Id: I441b3f46e2312c12771766f87b25d1dc15ff3af0 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-09-24amd/common/psp: Remove use of PspBaseLibCharles Marslett
Eliminate the references to PspBaseLib.c and PspBaseLib.h in agesa_headers.h. Fix psp.c references to definitions in those files by adding them to include/amdblocks/psp.h. BUG=b:78514564 TEST=Build and boot grunt/ChromeOS and restore an image from the internet. Change-Id: I2740ceb945736c6e413f7d0bd0c41a19e19c7d5a Signed-off-by: Charles Marslett <charles.marslett@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27619 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-20src/vendorcode/amd/agesa: Improve formatting of some f12 and f14 microcodesMike Banon
It is much more convenient to view these files if there are 8 values per line, not 1 value which results in a very long file. The contents remain the same: these microcodes are still the latest publicly available at the time of writing. Change-Id: I3e5296a5b5e895702a60aca1ded7418bb345263d Signed-off-by: Mike Banon <mikebdp2@gmail.com> Reviewed-on: https://review.coreboot.org/28391 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-20src/vendorcode/amd/agesa/f12: Update microcode to version 0x3000027 2011-09-13Mike Banon
This microcode update for CPU ID 0x300F10 should improve the system stability. It is a part of microcode_amd.bin officially released by AMD at linux-firmware: it starts at 0x217C offset, and size is 0x03C0 as specified priorly at 0x2178. Old version: 0x300000F [2010-04-10] replaced by New version: 0x3000027 [2011-09-13] Change-Id: I9650fab377d957904318ebb393323c2509cfea26 Signed-off-by: Mike Banon <mikebdp2@gmail.com> Reviewed-on: https://review.coreboot.org/28378 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-09drivers/vpd: Add VPD supportPatrick Rudolph
VPD reference: https://chromium.googlesource.com/chromiumos/platform/vpd/+/master/README.md Copy ChromeOS VPD driver to add support for VPD without CROMEOS. Possible use case: * Storing calibration data * Storing MAC address * Storing serial * Storing boot options + Now it's possible to define the VPD space by choosing one of the following enums: VPD_ANY, VPD_RW, VPD_RO. + CHROMEOS selects now VPD as part of it. + VPD is implemented as driver. Change-Id: Id9263bd39bf25d024e93daa57053fefcb1adc53a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25046 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-06acpi/gnvs: delay setting chromeos_apci_t.vdat until depthchargeJoel Kitching
Standardize on using vboot_handoff data structure for transferring data between coreboot and depthcharge. chromeos_acpi_t.vdat is undefined until set in depthcharge. BUG=b:112288216 TEST=compile and run on eve CQ-DEPEND=CL:1198814 Change-Id: Iccc021334d3c6f0145dffd5ca05beb9e430378a9 Signed-off-by: Joel Kitching <kitching@gmail.com> Reviewed-on: https://review.coreboot.org/28407 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-06chromeos/gnvs: remove function and naming cleanupJoel Kitching
- Remove unused acpi_get_chromeos_acpi_info (see CB:28190) - Make function naming in gnvs.h consistent (start with "chromeos_") BUG=b:112288216 TEST=compile and run on eve Change-Id: I5b0066bc311b0ea995fa30bca1cd9235dc9b7d1b Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/28406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-28acpi: Hide Chrome and coreboot specific devicesDavid Wu
Some ACPI interfaces introduced by Chrome or coreboot do not need drivers outside ChromeOS, for example Chrome EC or coreboot table; or will be probed by direct ACPI calls (instead of trying to find drivers by device IDs). These interfaces should be set to hidden so non-ChromeOS systems, for example Windows, won't have problem finding driver. Interfaces changed: - coreboot (BOOT0000), only used by Chrome OS / Linux kernel. - Chrome OS EC - Chrome OS EC PD - Chrome OS TBMC - Chrome OS RAMoops BUG=b:72200466 BRANCH=eve TEST=Boot into non-ChromeOS systems (for example Windows) and checked ACPI devices on UI. Change-Id: I9786cf9ee07b2c3f11509850604f2bfb3f3e710a Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/1078211 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Commit-Queue: Hung-Te Lin <hungte@chromium.org> Tested-by: Hung-Te Lin <hungte@chromium.org> Trybot-Ready: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/28333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-28fsp/fsp2_0/coffeelake: Update CFL FSP headersLijian Zhao
Coffeelake FSP headers had been updated to version 7.0.3D.60. Original file location from https://github.com/IntelFsp/FSP/tree/master/ CoffeeLakeFspBinPkg/Include . BUG=N/A TEST=Build and flash, able to boot up into OS on whiskeylake rvp platform. Change-Id: I656da83e9042642576b785643e423ba47da8dd73 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28286 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-28vendorcode/amd/pi/00670F00: Remove IDS headersRichard Spiegel
Only Ids.h had definitions still in use, and they were removed or moved to AGESA.h. Now Ids.h, IdsPerf.h and IdsLib.h can be safely removed. BUG=b:112885948 TEST=Build grunt Change-Id: I031ae8eb5f34fee801365fc89ea11a881211e726 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28299 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-28vendorcode/amd/pi/00670F00: Transfer TP_Perf_STRUCT to AGESA.hRichard Spiegel
Google is creating code to measure AGESA performance, which needs structure TP_Perf_STRUCT and associated definitions. In preparation to remove IDS headers, move the necessary definitions to AGESA.h. BUG=b:112885948 TEST=Build grunt Change-Id: I941a67a8889a9dbf35c9fd511c7f670623204134 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28369 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-27vendorcode/amd/pi/00670F00: Transfer IDS_CALLOUT to AGESA.hRichard Spiegel
Currently, IDS_CALLOUT macros are only used in stoneyridge callout. In preparation to remove IDS headers, move the definitions to AGESA.h. BUG=b:112885948 TEST=Build grunt Change-Id: Ia9717eb68fed2e568eaf169157c2837bb8232b7e Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28297 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-08-27vendorcode/amd/pi/00670F00/Include/Ids.h: Remove IDS_ERROR_TRAPRichard Spiegel
The macro IDS_ERROR_TRAP is only defined, and never used. Also, IDSOPT_ERROR_TRAP_ENABLED is defined FALSE, so the macro would translate to nothing. Remove the macro and IDSOPT_ERROR_TRAP_ENABLED. BUG=b:112885948 TEST=Build grunt Change-Id: I2c3ca4b0a4a1f96f245ba2f4902fd0051dda77ef Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-08-27vendorcode/amd/pi/00670F00/Lib/AmdLib.c: Remove IdsErrorStopRichard Spiegel
Function IdsErrorStop() is only used within AmdLib.c function LibAmdMsrRead(), which in turn is only used once within PspBaseLib.c and three times inside AmdLib.c, all with well defined MSR addresses. IdsErrorStop() is used as a trap if MSR address is 0 or 0xFFFFFFFF, which clearly it's not. Therefore it can be safely removed from AmdLib.c. BUG=b:112885948 TEST=Build grunt Change-Id: I47ffcbd4fbae28b6d711a340f0ac3f3b007e8e4f Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-08-27vendorcode/amd/cimx/sb*: Rename RSDP headerMarc Jones
Rename RSDP to RSDP_HEADER to match other AMD vendorcode and to not pollute the namespace. We will use RSDP in a future patch. Change-Id: I3b66135ae1732b86b5ebfcdc01a850a0d9d3eb50 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/28294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-22cbtable: remove chromeos_acpi from cbtableJoel Kitching
Since we can derive chromeos_acpi's location from that of ACPI GNVS, remove chromeos_acpi entry from cbtable and instead use acpi_gnvs + GVNS_CHROMEOS_ACPI_OFFSET. BUG=b:112288216 TEST=None CQ-DEPEND=CL:1179725 Change-Id: I74d8a9965a0ed7874ff03884e7a921fd725eace9 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/28190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-20vendorcode/amd/pi/00670F00/Lib: Remove unused functionsRichard Spiegel
The only code still used are LibAmdPciRead() and LibAmdPciWrite(). These functions are used by PspBaseLib. Remove all functions that are not used, directly or indirectly, by LibAmdPciRead() and LibAmdPciWrite(). BUG=b:112688270 TEST=Build grunt Change-Id: Iba5cfbeee8e83ca78279a1bc2a333370c04f55ed Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28194 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-20vendorcode/amd/agesa/f15tn: add Richland RL-A1 to the equivalence tableMike Banon
This small change is required for the successful loading of microcode from F15TnMicrocodePatch0600110F_Enc.c for the Richland RL-A1 CPUs, such as A10-5750M found at coreboot-supported Lenovo G505S laptop. Richland RL-A1 and Trinity TN-A1 CPUs are using the same microcode, so the Richland RL-A1 IDs should be added to this equivalence table. Function `GetPatchEquivalentId()` in `src/vendorcode/amd/agesa/f15tn/Proc/CPU/cpuMicrocodePatch.c` goes through the equivalence table like below. for (i = 0; i < (EquivalencyEntries * 2); i += 2) { // check for equivalence if (ProcessorRevisionId == MicrocodeEquivalenceTable[i]) { *ProcessorEquivalentId = MicrocodeEquivalenceTable[i + 1]; return (TRUE); } } Change-Id: I7a68f2fef74fb4c578c47645f727a9ed45526f69 Signed-off-by: Mike Banon <mikebdp2@gmail.com> Reviewed-on: https://review.coreboot.org/28204 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: <awokd@danwin1210.me> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-17cr50: Allow boards to disable powering off EC on cr50 updateDaisuke Nojiri
This patch allows boards to disable turning off EC on cr50 update. If CR50 resets the whole system, an EC reset is not required. BUG=b:112604277 BRANCH=none TEST=gsctool -a -u /media/removable/cr50.bin && reboot Verify EC reboots. AP prints 'Waiting for CR50 reset to pick up update' then reboots. Change-Id: I60a7aa50a549e7a5a1a114245fbf7b9646d813bb Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/28110 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-17src/vendorcode/amd/pi/00670F00/Proc/Fch/Common: Remove unused headersRichard Spiegel
Header files AcpiLib.h, FchDef.h and FchBiosRamUsage.h became obsolete when VENDORCODE_FULL_SUPPORT was removed. Therefor they should be removed. BUG=b:112602580 TEST=Build grunt and gardenia. Change-Id: If4fdb9ae1e106ba15f2a073f592499e638e40c65 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28093 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-15Stoneyridge: Remove VENDORCODE_FULL_SUPPORTRichard Spiegel
Remove VENDORCODE_FULL_SUPPORT from /soc/amd/stoneyridge/Kconfig and from vendorcode/amd/pi/00670F00/Makefile.inc, thus completing the removal of VENDORCODE_FULL_SUPPORT from coreboot. BUG=b:112578491 TEST=none, VENDORCODE_FULL_SUPPORT already not used. Change-Id: Idb5f6dc7add1617f7a97a97ae110901b2dec0996 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28092 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-15vendorcode/amd/pi/00670F00/Lib/AmdLib.c: Remove VENDORCODE_FULL_SUPPORTRichard Spiegel
Remove VENDORCODE_FULL_SUPPORT from file above mentioned file, in preparation to full removal of VENDORCODE_FULL_SUPPORT functions. BUG=b:112578491 TEST=none, VENDORCODE_FULL_SUPPORT already not used. Change-Id: Ic23dcf245b2cee24f7363ca3bb9918eb2f11179c Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-15vendorcode/amd/pi/00670F00/binaryPI/AGESA.c: Remove VENDORCODE_FULL_SUPPORTRichard Spiegel
Remove VENDORCODE_FULL_SUPPORT from file above mentioned file, in preparation to full removal of VENDORCODE_FULL_SUPPORT functions. BUG=b:112578491 TEST=none, VENDORCODE_FULL_SUPPORT already not used. Change-Id: Id91e76282509743070e34c02082d3f3f46a14059 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-15vendorcode/amd/pi/00670F00/Proc/Psp: Remove VENDORCODE_FULL_SUPPORTRichard Spiegel
Remove VENDORCODE_FULL_SUPPORT from file: vendorcode/amd/pi/00670F00/Proc/Psp/PspBaseLib/PspBaseLib.c BUG=b:112578491 TEST=none, VENDORCODE_FULL_SUPPORT already not used. Change-Id: I0d590b175a3cf0426580dc9ee5164b3cedc838e2 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-15vendorcode/amd/pi/00670F00/Proc/Fch/Common: Remove VENDORCODE_FULL_SUPPORTRichard Spiegel
Remove VENDORCODE_FULL_SUPPORT from files FchLib.c and FchPeLib.c. BUG=b:112578491 TEST=none, VENDORCODE_FULL_SUPPORT already not used. Change-Id: If24eb7f005720a62a1280fe78ddb54c9d2690150 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-15vendorcode/amd/pi/00670F00/Lib: Remove read modify write functionsRichard Spiegel
Now that the functions that used them were safely removed, remove LibAmdIoRMW(), LibAmdMemRMW() and LibAmdPciRMW(). BUG=b:112541697 TEST=Build grunt and gardenia Change-Id: I570bd91cd9eba7798ea39d9685e214fee10824be Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-15vendorcode/amd/pi/00670F00: Remove functions that use LibAmdPciRMW()Richard Spiegel
The functions that use LibAmdPciRMW() are not used by coreboot and can be safely removed in preparation to remove LibAmdPciRMW() itself. The functions to be removed are: From vendorcode/amd/pi/00670F00/Proc/Fch/Common/FchPeLib.c: ProgramPciByteTable(). From vendorcode/amd/pi/00670F00/Proc/Fch/Common/FchLib.c: RwXhciIndReg(), RwXhci0IndReg() and RwXhci1IndReg(). From vendorcode/amd/pi/00670F00/Proc/Fch/Common/PciLib.c: RwPci(). BUG=b:112541697 TEST=Build grunt and gardenia Change-Id: I0b96d3d6b98140ed8e9298817dbe29d55b9e22cb Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-15vendorcode/amd/pi/00670F00: Remove functions that use LibAmdMemRMW()Richard Spiegel
The functions that use LibAmdMemRMW() are not used by coreboot and can be safely removed in preparation to remove LibAmdMemRMW() itself. The functions to be removed are: ProgramFchAcpiMmioTbl() and GetEfuseStatus(), both from vendorcode/amd/pi/00670F00/Proc/Fch/Common/FchPeLib.c. BUG=b:112541697 TEST=Build grunt and gardenia Change-Id: Ib935b1797c4bf8b504fdda6f676fca369169a7f1 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-14cbmem: rename vdat to chromeos_acpiJoel Kitching
There is a confusingly named section in cbmem called vdat. This section holds a data structure called chromeos_acpi_t, which exposes some system information to the Chrome OS userland utility crossystem. Within the chromeos_acpi_t structure, there is a member called vdat. This (currently) holds a VbSharedDataHeader. Rename the outer vdat to chromeos_acpi to make its purpose clear, and prevent the bizarreness of being able to access vdat->vdat. Additionally, disallow external references to the chromeos_acpi data structure in gnvs.c. BUG=b:112288216 TEST=emerge-eve coreboot, run on eve CQ-DEPEND=CL:1164722 Change-Id: Ia74e58cde21678f24b0bb6c1ca15048677116b2e Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/27888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-06vendorcode/intel/fsp/fsp2_0/glk: Add nWR config in Odt ConfigKane Chen
From doc 571118, the bit 5 of OdtConfig is nWR config. If the bit 5 is set, MRC will set MR1 nWR field to 24. If the bit 5 is clear, MRC will set MR1 nWR field to 6. Change-Id: Ic8e4e2ffb098c8ba2f670535981e9a30c3d45b64 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/27814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-31src/vendorcode/amd/pi/00670F00: Remove IMC supportRichard Spiegel
Per AMD, the Integrated Micro Controller is not a supported feature of the Stoney Ridge APU. Systems are expected to implement an external EC for desired features. Remove all stoney IMC files and functions from vendor code. BUG=b:111780177 TEST=Build grunt and gardenia Change-Id: I06e993fa498cc0978c1d037bc6001682407f7fac Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27652 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-25vendorcode/intel: Update GLK FSP Header files w.r.t FSP v2.0.5John Zhao
Update FSP header files to match FSP Reference Code Release v2.0.5 for Geminilake BUG=b:111683980 CQ-DEPEND=CL:*653835 Change-Id: Ib5ac532843fdb30ac3269fb6ed96dd05ef5736cc Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/27623 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-17vendorcode/cavium/include: Make bdk_pop and dpop staticMartin Roth
Fix an undefined reference error with GCC 8.1 /cb- build/Testing_coreboot.0/CAVIUM_CN8100_SFF_EVB/romstage/vendorcode/cavium/bdk /libbdk-dram/bdk-dram-size.o: In function `bdk_dram_get_size_mbytes': /home/coreboot/slave-root/workspace/Testing_coreboot/src/vendorcode/cavium/bdk /libbdk-dram/bdk-dram-size.c:198: undefined reference to `bdk_pop' /cb- build/Testing_coreboot.0/CAVIUM_CN8100_SFF_EVB/romstage/vendorcode/cavium/bdk /libbdk-dram/bdk-dram-test.o: In function `bdk_get_num_cores': /home/coreboot/slave- root/workspace/Testing_coreboot/src/vendorcode/cavium/include/bdk/libbdk-hal /bdk-utils.h:164: undefined reference to `bdk_dpop' /cb- build/Testing_coreboot.0/CAVIUM_CN8100_SFF_EVB/romstage/vendorcode/cavium/bdk/libdram /dram-init-ddr3.o: In function `init_octeon3_ddr3_interface': /home/coreboot/slave- root/workspace/Testing_coreboot/src/vendorcode/cavium/bdk/libdram/dram-init- ddr3.c:7550: undefined reference to `bdk_pop' /cb- build/Testing_coreboot.0/CAVIUM_CN8100_SFF_EVB/romstage/vendorcode/cavium/bdk/libdram /dram-l2c.o: In function `bdk_get_num_cores': /home/coreboot/slave- root/workspace/Testing_coreboot/src/vendorcode/cavium/include/bdk/libbdk-hal /bdk-utils.h:164: undefined reference to `bdk_dpop' make[1]: *** [src/arch/arm64/Makefile.inc:119: /cb- build/Testing_coreboot.0/CAVIUM_CN8100_SFF_EVB/cbfs/fallback/romstage.debug] Error 1 Change-Id: Ifcde5476c6f347c0eac7ca44bac88d3fa4017fb7 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/27493 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2018-07-17cavium/bdk: Poke the watchdog while PCIe initPatrick Rudolph
Prevent a reboot loop due to slow PCIe init. Poke the watchdog a few times. Change-Id: I03739d7dbad3072ccf77364fa4caba42c66ac643 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27455 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-17cavium/bdk: Fix reference clockPatrick Rudolph
Swap 100Mhz and 156Mhz reference clock. Correct values are taken from __bdk_qlm_sff81xx_set_reference(). Tested on Cavium's cn8100_sff_evb. Change-Id: I312ce7379b361594249f9f26f4e561ebf57347df Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27454 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-17cavium/bdk: Fix possible divide by zeroPatrick Rudolph
Fix Coverity CID1393970 Change-Id: I5db6866b8e51eaea201a4c03e59d7d00f4f826e7 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-07-17cavium/bdk: Fix coverity and remove hardcoded DRAM speedPatrick Rudolph
* Fix CID1393963 (Uninitialized variables) * Comment in working code * Remove workaround to limit DDR speed Change-Id: I96289da43c1018c2fdf9d013ce7f21d7511ba595 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27452 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-17cavium/bdk: Read DDR freq from memory controllerPatrick Rudolph
The BDK config subsystem can't store values in romstage. Read frequency from DDR memory controller instead from BDK config. Fixes memory info showing always 0 MT/s. Change-Id: Iaee33e57e27ca182f41be923cf950868f66d3638 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27451 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-17cavium/bdk: Fix possible buffer overrunPatrick Rudolph
Fix Coverity CID1393975 Change-Id: I275cabf55fba464be7bd4c21dfe5826ea554ac84 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-07-17bdk: Use Kconfig options instead of getenv()Patrick Rudolph
* Use Kconfig options instead of unusable getenv * Select CAVIUM_BDK_DDR_TUNE_HW_OFFSETS on CN81XX * Fix Coverity CID 1393976 (DEADCODE) Tested on Cavium's cn8100_sff_evb. Change-Id: Ia16c0161b0e9cf5d06418e46556c0fb45532a5b1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>