| Age | Commit message (Collapse) | Author |
|---|
|
Add a 'depends on' statement so that path/to/opensil/source is only
active when the stub is not built.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ic050ff0fa3f428e6adff3357f476fcd8a88cdf7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81189
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove those MSVC compiler defaults checks so that the GCC defaults for
wchar_t can be used. The FSP interface does not depend on wchar_t.
TEST: the resulting binaries are the same for intel/mtlrvp
Change-Id: I0ee1abc7e9ba46665838b63a6cfe0f4aa300114c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
Add a stub MPIO chip driver to the openSIL stub code, so that the
devicetree entries needed for the MPIO chip can already be added to the
mainboard's devicetree files. This driver won't do anything, but still
allows the register settings in the devicetree to be set to make
switching over to the actual openSIL code and the corresponding glue
code easier.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib4f5c232859b9abcd10bfa5c21e2f2c3a70b4b0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Update header files for FSP for Meteor Lake platform to version 3471_91,
previous version being 3471_85.
FSPM:
1. Address offset changes
BUG=b:327688959
TEST=Able to build and boot google/rex to ChromeOS.
Change-Id: I5a71232018dfefec63b0a83d1e87717e238a4a0a
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80782
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the GiB define to make the 4 GiB boundary used in some places in the
code a bit easier to read.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I81877a5d293c883d2e31bdb18ae3b22b8a44e62f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use get_top_of_mem_below_4gb instead of open-coding the functionality.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5885e9ad89ed9f0aa657c56804e98c352267267f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Move MEM_ADDR_64MB_SHIFT_BITS from FSP headers to Xeon-SP common layer
to reduce the dependency.
TEST=intel/archercity CRB
Change-Id: I4e1a652ad58233f7514cb9b23813d75144b8d435
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This reverts commit b5f6320c694766d10023fe8f5183c9c143441b2b.
ADL-N FSP uses 202111 Edk2. There are structure definition changes
between 202005 and 202111. One of change is in FSP_INFO_HEADER structure.
This patch is to bring back support of edk2-stable202111.
BUG=b:296433836
TEST=Able to build google/crassk.
Change-Id: Id1d3e2c5b368a479e637f3ab3d18e242607849ed
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
* Introduces logic to display context-specific boot splash logos.
* Logo selection considers:
* Chromebook-Plus hardware compliance (using factory_config).
* VPD-based product segmentation (soft-branded vs. regular
chromebook).
* Default Chromebook logo as fallback for regular Chromebook.
This patch fixes the problem where existing logic was unable to pick
correct ChromeOS boot splash logo based on the product segmentation.
Relation between product segment and boot splash screen:
1. Chromebook-Plus Hard-branded device: Renders "cb_plus_logo.bmp" logo
2. Chromebook-Plus Soft-branded device: Renders "cb_plus_logo.bmp" logo
3. Regular Chromebook device: Renders "cb_logo.bmp"
BUG=b:324107408
TEST=Verified logo selection based on compliance and product
requirements.
Change-Id: I9bb1e868764738333977bd8c990bea4253c9d37b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I60ac259d2aa0bd500063a5c841ba33e576e022f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80702
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add FSP header files for Twin Lake. Currently these are just a copy of
ADL-N headers.
BUG=none
BRANCH=firmware-nissa-15217.B
TEST=Build and boot Google/Yaviks with Twin Lake kconfig enabled
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I37579335c784866ebbf978e28936abf046a85b48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Macros MAX_ACPI_MEMORY_AFFINITY_COUNT and MAX_SRAT_MEM_ENTRIES_PER_IMC
are ACPI table specific, and could be used across Xeon-SP SoCs.
This patch moves their definition from FSP header to Xeon-SP layer
ACPI header.
TEST=intel/archercity CRB
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Change-Id: I6c3a84b04a452bc8d4217947a7d12f050c94b56b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80629
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the definition of SRAT memory flags (SRAT_ACPI_MEMORY_ENABLED
and SRAT_ACPI_MEMORY_NONVOLATILE) from FSP header to ACPI common
codes.
TEST=intel/archercity CRB
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Change-Id: I6aa5c20c9556fd5d680406518d19a83801b0852c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
These strings didn't match the license names exactly, so update them
to match.
Change-Id: Ib946eb15ca5fa64cbd6b657350b989b4a4c1b7b7
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
In preparation to using gpp_clk_setup_common for picasso, bring enum
defined in picasso more in line with other AMD SoC.
Change-Id: I9753acdff15921c84516ec873c925f36afdd2aa3
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80412
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Add a stub implementation of the openSIL interface between coreboot and
vendorcode. This can be used to add most of the coreboot-side support
for a SoC using openSIL without the actual opnSIL code already being
publicly available. Once the corresponding openSIL code is available,
the SoC can then switch over to using the actual openSIL implementation.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9284b0cbacba6eae7e2e7e69bc687f015076c2b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80292
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Provide 3 separate functions for each openSIL time point instead of one,
so that we don't need the xSIM-api header file to be included in
opensil.h to decouple the coreboot code more form the openSIL code. This
will allow to create an openSIL stub implementation to already get most
of the coreboot-side SoC code in place before the openSIL source code is
done and released.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I969bc0862560b7254c48f04e9a03387417f328bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Since reporting the PCI ECAM MMCONF MMIO region and the IO ports for the
legacy PCI config space access is needed on all AMD SoCs, implement a
common add_pci_cfg_resources function that reports both and gets called
from amd_pci_domain_read_resources and don't report those in the SoC-
specific code any more. The only functional change is that on Genoa now
the IO ports used for the legacy PCI config space access get reserved.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibbcc2aea4f25b6dc68fdf7f360e5a4ce53f6d850
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
To make add_opensil_memmap match the other function that are directly or
indirectly called by amd_pci_domain_read_resources, pass the resource
index as a pointer instead of passing it by value and then returning the
new resource index.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6a17e488a01cc52b2dab5dd3e3d58bdf3acb554d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use an unsigned long as resource index type instead of an int to match
the data type used for the index in the resource struct and the
functions to report the resources.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iccc2e0556ce8688d933506e0db5cc4b83c66ac76
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80265
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This renames bus to upstream and link_list to downstream.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I80a81b6b8606e450ff180add9439481ec28c2420
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Macros can be confusing on their own; hiding commas make things worse.
This can sometimes be downright misleading. A "good" example would be
the code in soc/intel/xeon_sp/spr/chip.c:
CHIP_NAME("Intel SapphireRapids-SP").enable_dev = chip_enable_dev,
This appears as CHIP_NAME() being some struct when in fact these are
defining 2 separate members of the same struct.
It was decided to remove this macro altogether, as it does not do
anything special and incurs a maintenance burden.
Change-Id: Iaed6dfb144bddcf5c43634b0c955c19afce388f0
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80239
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Move the verstage on PSP files in vendorcode from the fsp subdirectory
to a new psp_verstage subdirectory, since those files aren't specific to
the case of the FSP being used for the silicon initialization.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic47f8b18bc515600add7838f4c7afcb4fff7c004
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80209
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
When the device right below the MPIO chip driver has downstream devices
without another chip in between, those downstream devices will also have
their chip_ops entry set to vendorcode_amd_opensil_genoa_poc_mpio_ops.
To avoid adding the same MPIO descriptor again for those additional
downstream devices, make sure that the chip_info pointer of the device
isn't the same as the one of the parent device, since that's only the
case for those additional downstream devices.
TEST=Onyx still boots to the payload and the MPIO configuration reported
from the openSIL code is still the same
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Nico Huber <nico.h@gmx.de>
Change-Id: I6ba90fdc83ba089127e6722778bfef29dd480bb4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80149
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Call setup_opensil, opensil_entry, and fch_init in the right order from
the init method of the SoC's chip operations. This brings this SoC both
more in line with the other SoCs and avoids using boot state hooks for
this which also makes the sequence in which those functions are called
easier to understand. Previously the boot states were used so that
setup_opensil was run before configure_mpio which was run before
opensil_entry(SIL_TP1), but since configure_mpio is called from
setup_opensil, this is no longer necessary.
TEST=Onyx still boots to the payload and the MPIO configuration reported
from the openSIL code is still the same. The FCH init code now runs
before the resource allocation like on the AMD SoCs that rely on FSP.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic752635da5eaa9e333cfb927836f0d260d2ac049
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79985
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Instead of calling configure_mpio from the init function of the MPIO
chip struct for the first device that has this struct as chip_ops, call
if from setup_opensil. This will allow to do the calls into openSIL from
the SoC's chip_ops init function instead of having to rely on boot state
hooks. configure_mpio needs to be called after the xSimAssignMemoryTp1
call which sets up the openSIL data structures, but before the
opensil_entry(SIL_TP1) call for which the MPIO data structures need to
be filled for it to be able to initialize the hardware accordingly.
Since the vendorcode_amd_opensil_genoa_poc_mpio_ops struct now no longer
assigns configure_mpio to the init function pointer, we have to check
if the device's chip_ops pointer points to
vendorcode_amd_opensil_genoa_poc_mpio_ops instead of checking if the
chip_ops' init function is configure_mpio to match for the devices below
the MPIO chips in the devicetree.
TEST=Onyx still boots to the payload and the MPIO configuration reported
from the openSIL code is still the same
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If37077c879e266763fd2748a1a8d71c63c94729b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Since we pass va_list list to the print function, we need to use vprintk
instead of printk. Earlier versions of this code used vsnprintf and a
local buffer, but when that code was reworked to not need the temporary
buffer, it was replaced by printk instead of the correct vprintk.
TEST=Now the console output from openSIL looks as expected:
Example line from openSIL's console output when it prints the MPIO
configuration from a log some commits before this patch:
Host PCI Address - -1352681400:-1353251983:7
Same line with this patch applied looks how it's supposed to:
Host PCI Address - 0:0:0
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Varshit Pandya <pandyavarshit@gmail.com>
Change-Id: Ia931cc80dea5b7eabb75cfb19f8baa9a09cd2dbf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80203
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As a preparation for the following patch, rename mpio_config to
configure_mpio to make it both a bit more descriptive and to match the
naming scheme used for the functions that get called by setup_opensil.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic4b1aa6e964cbbb4affb89cacd33af8b24871bb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I80559b7c86a8fd2583cb0335279f676e0aa0209e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80067
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
|
|
The `d` flag used in .section is unknown in LLVM/clang 17 and fails
the build. It is also not documented in the ARM compiler manual.
The GNU assembler supports the `d` flag but it also seems to compile
without.
ARM compiler manual: https://developer.arm.com/documentation/101754/0621/armclang-Reference/armclang-Integrated-Assembler/Section-directives
GNU compiler manual: https://sourceware.org/binutils/docs/as/Section.html
`coreboot.rom` does not change between compiling a google skyrim board
with or without this patch. However the debug info for the following
three files in the build directory changes with this patch:
* build/verstage/vendorcode/amd/fsp/mendocino/bl_uapp/bl_uapp_end.o
* build/cbfs/fallback/verstage.elf
* build/cbfs/fallback/verstage.debug
Change-Id: Ie3735b72349b0cfdd27364a39bcdda390af7bfa5
Signed-off-by: Lennart Eichhorn <lennarteichhorn@googlemail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79366
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit adds support for showing different logos on the ChromeOS
firmware splash screen based on the device model (between
Chromebook-Plus and regular ChromeOS devices like Chromebook and
Chromebox). This allows OEMs to customize the branding on their
devices.
This patch also introduces three new Kconfigs:
- CHROMEOS_FW_SPLASH_SCREEN
- CHROMEOS_LOGO_PATH
- CHROMEBOOK_PLUS_LOGO_PATH
which allow users to enable the fw splash screen feature in the
vendorcode. Previously, we were using the BMP_LOGO Kconfig in
drivers/intel/fsp2_0, but we didn't want the top level Kconfigs to be
located inside the architecture specific files.
BUG=b:317880956
BRANCH=None
TEST=emerge-rex coreboot chromeos-bootimage
verify that FW splash screen appears
Change-Id: I56613d1e7e81e25b31ad034edae0f716c94c4960
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79775
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Update header files for FSP for Meteor Lake platform to version 3471_85,
previous version being 3424_88.
FSPM:
1. Add 'DisplayGpioPinMux' UPDs
2. Address offset changes
BUG=b:318772151
TEST=Able to build and boot google/rex to ChromeOS.
Change-Id: I11c39fc2e3099d93a488e71d571ac1af02345fbd
Signed-off-by: Kulkarni, Srinivas <srinivas.kulkarni@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79829
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch ensures `chromeos_get_factory_config()` returns an
unsigned integer value because factory config represents
bit-fields to determine the Chromebook Plus branding.
Additionally, introduced safety measures to catch future
"factory_config" bit-field exhaustion.
BUG=b:317880956
TEST=Able to verify that google/screebo is branded as
Chromebook Plus.
Change-Id: I3021b8646de4750b4c8e2a2981f42500894fa2d0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79769
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch implements an API which relies on the
chromeos_get_factory_config() function to retrieve the factory
config value.
This information is useful to determine whether a ChromeOS device
is branded as a Chromebook Plus based on specific bit flags:
- Bit 4 (0x10): Indicates whether the device chassis has the
"chromebook-plus" branding.
- Bits 3-0 (0x1): Must be 0x1 to signify compliance with
Chromebook Plus hardware specifications.
BUG=b:317880956
TEST=Able to verify that google/screebo is branded as
Chromebook Plus.
Change-Id: Iebaed1c60e34af4cc36316f1f87a89df778b0857
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This code leverages the TPM vendor-specific function
tlcl_cr50_get_factory_config() to fetch the device's factory
configuration.
BUG=b:317880956
TEST=Able to retrieve the factory config from google/screebo.
Change-Id: I34f47c9a94972534cda656ef624ef12ed5ddeb06
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Acoustic noise in PCBs is a common problem and be caused by a variety
of factors, including:
Mechanical vibrations, Electromagnetic interference (EMI) and/or Thermal
expansion.
This patch adds the UPDs to FSPM header file for mitigating the acoustic
noise.
FSPM:
1. AcousticNoiseMitigation
2. FastPkgCRampDisable
3. SlowSlewRate
BUG=b:312405633
TEST=Able to build and boot google/rex.
Change-Id: Iea0bfa2f92bb82e722ffc1a0b2f1e374b32e4ebc
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79301
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
|
|
This updates all warnings currently being printed under the files_added
and build_complete targets to the show_notices target.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia14d790dd377f2892f047059b6d24e5b5c5ea823
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79423
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update header files for FSP for Raptor Lake platform to version 4435_00,
previous version being 4301_01.
FSPM:
1. Options changed for Ppr Enable
2. Add 'Ppr Run Once' and 'Post Package Repair' UPD's
FSPS:
1. Add 'CpuPcieRpTestForceLtrOverride' UPD
MemInfoHob:
1. Structure updated
BUG=b:315234533
Kit: https://www.intel.com/content/www/us/en/secure/design/confidential/
software-kits/kit-details.html?kitId=793230
Cq-Depend: chrome-internal:6786881, chrome-internal:6787635
Cq-Depend: chrome-internal:6719974, chromium:5125983
Change-Id: I65b8a4b6c72f7ae3fff1ee6d073311d154cd6b69
Signed-off-by: Kulkarni, Srinivas <srinivas.kulkarni@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The openSIL code for the Genoa SoC is only a proof of concept, so change
the name of the Kconfig option to include this code in the build from
SOC_AMD_OPENSIL_GENOA to SOC_AMD_OPENSIL_GENOA_POC to clarify that this
is code that isn't intended or ready to be productized.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If91cdaa7c324426964bba2de2109b6c38482fab8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79574
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Even though this SoC is called 'Genoa', the openSIL implementation and
the corresponding coreboot integration is only a proof of concept that
isn't fully featured, has known limitations and bugs, and is not meant
for or ready to being productized. Adding the proof of concept suffix to
the name should point this out clearly enough so that no potential
customer could infer that this might be a fully functional and supported
implementation which it is not.
Change-Id: Ia459b1e007dcfd8e8710c12e252b2f9a4ae19b72
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77894
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I176182180f508a180726fca60064b16fad80e9d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Add the opensil_fill_fadt_io_ports function to fill in the ACPI I/O
ports in FADT that openSIL configured.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I154a162cc8e048cadab693c0755e96c71a62983c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76529
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the existing FSP 4301.01 headers for Raptor Lake out of
subdirectory called 43101.01 to follow standard process.
Change-Id: I710f373acd37e9e0f8b50084a1a7e9fbda816e8c
Signed-off-by: Kulkarni, Srinivas <srinivas.kulkarni@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
To quote its repo[0]: Wuffs is a memory-safe programming language (and
a standard library written in that language) for Wrangling Untrusted
File Formats Safely. Wrangling includes parsing, decoding and encoding.
It compiles its library, written in its own language, to a C/C++ source
file that can then be used independently without needing support for
the language. That library is now imported to src/vendorcode/wuffs/.
This change modifies our linters to ignore that directory because
it's supposed to contain the wuffs compiler's result verbatim.
Nigel Tao provided an initial wrapper around wuffs' jpeg decoder
that implements our JPEG API. I further changed it a bit regarding
data placement, dropped stuff from our API that wasn't ever used,
or isn't used anymore, and generally made it fit coreboot a bit
better. Features are Nigel's, bugs are mine.
This commit also adapts our jpeg fuzz test to work with the modified
API. After limiting it to deal only with approximately screen sized
inputs, it fuzzed for 25 hours CPU time without a single hang or
crash. This is a notable improvement over running the test with our
old decoder which crashes within a minute.
Finally, I tried the new parser with a pretty-much-random JPEG file
I got from the internet, and it just showed it (once the resolution
matched), which is also a notable improvement over the old decoder
which is very particular about the subset of JPEG it supports.
In terms of code size, a QEmu build's ramstage increases
from 128060 bytes decompressed (64121 bytes after LZMA)
to 172304 bytes decompressed (82734 bytes after LZMA).
[0] https://github.com/google/wuffs
Change-Id: If8fa7da69da1ad412f27c2c5e882393c7739bc82
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Based-on-work-by: Nigel Tao <nigeltao@golang.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78271
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the xPRF call to report holes in memory to report those regions as
reserved.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: If89b08a31a9b9f8e7d2959d1bc45e91763fe565b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78922
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the openSIL MPIO chip driver that allows specifying the MPIO lane
configuration in the mainboard's devicetree instead of having this
configuration in a separate port descriptor C file.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I1d408a7eff22423612bc5eb9bfebaf0d86642829
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76520
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For now, we'll use a hard-coded SATA controller configuration that
should work in most cases instead of making everything configurable via
devicetree settings.
In the process of scrubbing opensil for public release SATA became non
functional.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ib37a081c0be4fdd2785e1dca70f376b967ce4462
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76518
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Drive board specific USB configuration from the coreboot devicetree into
the opensil input block.
In the process of scrubbing opensil for public release USB became non
functional.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic41f57f3208aebb3a8b42f70cf558de50fa4de24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78919
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update header files for FSP for Meteor Lake platform to
version 3424_88, previous version being 3323_86.
FSPM:
1. Add `MarginLimitCheck` UPD
2. Add pre-memory graphics UPDs i.e `LidStatus`,
`VgaInitControl`,`VbtPtr`,`VbtSize`,`VgaMessage`
3. Address offset changes
FSPS:
1. Add `Usb4CmMode` UPD
2. Address offset changes
BUG=b:310108425
TEST=Able to build and boot google/rex to ChromeOS.
Change-Id: I3f71cd739a607318fda06fa50d4a379d64857458
Signed-off-by: Kilari Raasi <kilari.raasi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78997
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Tell the resource manager in openSIL to distribute the available IO and
MMIO ranges across the different PCI root bridges.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0985712bc4e87b4068dea22bde1dfa371a6c47bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
- First a console is set up for opensil.
- After that a region in CBMEM is reserved and passed to opensil which
will use it as a buffer for input/output information.
- Finally opensil is called and the return value handled.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I4833a5a86034a13e6be102a6b68c3bb54108bc9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use an xPRF call to get the top of lower DRAM.
Organize Makefile to keep romstage/ramstage components separate.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I269663414f4d8e39eb218cd6348bfce7989a79f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76513
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
OpenSIL has an API to call back into the host firmware to print to the
console.
These could be moved to a common directory when there are more openSIL
implementations to see if it is actually common.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I208eea37ffde64a2311cb9f51e2bcd1ac3dbad4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
OpenSIL has a native buildsystem using meson and configuration mechanism
using kconfiglib.
To be able to use the coreboot toolchain with opensil, meson crossfiles
are used, which get generated by coreboot makefiles.
Configuration of opensil is done in a similar fashion with a template
defconfig after which kconfiglib is called to generate headers.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ide2d181914116119dfd37b1511d89ea965729141
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76511
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Updating from commit id d81517e:
2023-09-28 14:13:56 -0600 - (Improper bit field offset calculation)
to commit id 0411c75:
2023-11-10 23:59:34 +0000 - (Minor changes to fix issues compiling with clang)
This brings in 1 new commits:
0411c75 Minor changes to fix issues compiling with clang
Change-Id: Ib3adfd7bccd45dfd76ede462677dcfb294baa15d
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79009
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Having a separate romstage is only desirable:
- with advanced setups like vboot or normal/fallback
- boot medium is slow at startup (some ARM SOCs)
- bootblock is limited in size (Intel APL 32K)
When this is not the case there is no need for the extra complexity
that romstage brings. Including the romstage sources inside the
bootblock substantially reduces the total code footprint. Often the
resulting code is 10-20k smaller.
This is controlled via a Kconfig option.
TESTED: works on qemu x86, arm and aarch64 with and without VBOOT.
Change-Id: Id68390edc1ba228b121cca89b80c64a92553e284
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55068
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This is a RW mirror of AMD's openSIL for Genoa with additions from
Arthur Heymans.
- origin/openSIL/main from
https://github.com/openSIL/openSIL.git
- origin/ArthurHeymans/64b_public from
https://github.com/ArthurHeymans/openSIL.git
The current main branch starts with Arthur's branch and adds 5 commits
from the AMD's openSIL repo.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8917edf3a6a8493ffa9230902cafcc6234d3d571
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
A new FSP-S UPD is added to allow passing a buffer containing boot logo
in BMP format. Update the FSP-S UPD and add a SoC specific callback to
populate the UPD.
BUG=b:294055390
TEST=Build and boot to OS in Skyrim. Pass the BMP logo buffer through
the UPD to FSP-S. Ensure that the concerned driver in FSP-S handles the
buffer.
Change-Id: Ie522956b6dfe2400ef91d43c80f2adc6d52c8415
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78817
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Export Power State Current 1, 2 and 3 Threshold configuration entries.
BUG=b:308002192
Change-Id: Iff4467720541efbdedace12431cd1f6f66fca8e6
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Remove the existing FSP 4221.00 headers subdirectory called
4221.00_google, and have Google vendor devices use FSP 4301.01.
BUG=b:306181828
TEST=`emerge-brya coreboot chromeos-bootimage`, flash and boot skolas to kernel.
Change-Id: Ic64b3aec62f0d6302278393bf06d090f43c0d592
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: <srinivas.kulkarni@intel.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Convert TPM functions to return TPM error codes(referred to as
tpm_result_t) values to match the TCG standard.
BUG=b:296439237
TEST=build and boot to Skyrim
BRANCH=None
Change-Id: Ifdf9ff6c2a1f9b938dbb04d245799391115eb6b1
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77666
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Convert hex print values to use the %#x qualifier to print 0x{value}.
BUG=b:296439237
TEST=build and boot to Skyrim
BRANCH=None
Change-Id: I0d1ac4b920530635fb758c5165a6a99c11b414c8
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78183
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adopt TCG standard naming and definitions for TPM Return codes.
BUG=b:296439237
TEST=Build and boot to OS on skyrim
BRANCH=None
Change-Id: I60755723262ec205a4c134948b0250aac4974d35
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77665
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update header files for FSP for Meteor Lake platform to version
3323.86, previous version being 3323.84.
FSPM:
1. Added new UPDs
- AcLoadline
- DcLoadline
- LowerBasicMemTestSize
2. Address offset changes
BUG=b:301441204
TEST=Able to build and boot google/rex to ChromeOS.
Change-Id: I6c2f7f588874b37c52e3926c02e381ceff14f5af
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78065
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
Make naming convention consistent across all functions return values.
BUG=b:296439237
TEST=Boot to OS on Skyrim
BRANCH=None
Change-Id: If86805b39048800276ab90b7687644ec2a0d4bee
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77536
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Move the existing FSP 4221.00 headers for Raptor Lake to a
subdirectory called 4221.00_google, and select this if the
vendor is Google.
Add the standard FSP 4301.01 headers to a separate directory,
from Intel download #686654, and select this for all other
vendors.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Icd99bdee1eeac70dfcaca3d07150d3de6bb83d81
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77101
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When CSE jumps between RO and RW, it triggers global reset so the
AP goes down to S5 and back to S0. For Chromebox, when AP goes
down to S5 EC set AP_IDLE flag. This cause an issue to warm reset
the Chromebox device when it is in recovery mode and powered by
USB-C adapter. This patch allows AP to direct EC to clear AP_IDLE
flag before trigger reset.
BUG=b:296173534
BRANCH=firmware-dedede-136-6.B
TEST=Chromebox DUT which is powered by USB-C adapter boots up
after warm reset in recovery mode
Change-Id: Ib0002c1b8313c6f25d2b8767c60639aed8a4f904
Signed-off-by: Derek Huang <derekhuang@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77632
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daisuke Nojiri <dnojiri@google.com>
|
|
Previously the clear_ec_ap_idle() is implemented in
cr50_enable_update.c and be called in the file. Move it to
common code so that it can be called in cse_board_reset.c
TEST=emerge-brask coreboot
Change-Id: I2dbe41b01e70f7259f75d967e6df694a3e0fac23
Signed-off-by: Derek Huang <derekhuang@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77631
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Update the use of __attribute__((weak)) to the preferred __weak
BUG=None
TEST=Builds
BRANCH=None
Change-Id: I75a0e7c03e537be2d38b7f9c6b81eafbb5fb8018
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I870fa65ff05cf5907d62b3af1b2f9c4334b62603
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77260
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update header files for FSP for Meteor Lake platform from 3292.83
to 3323.84.
The patch changess only a few spacing alignment for FSP-M header and
added few PPR (Post Package Repair) related variable for MemInfoHob
header.
BUG=b:297965979
TEST=Able to build and boot google/rex.
Change-Id: I65c6e05256a2ae9516449dbce62affd040cb0e56
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77561
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
License classifiers are much better about classifying files with SPDX
headers than they are at classifying the general text licenses due to
minor variations in the text. To help with classification, add the
SPDX headers to the files.
To see the current state of coreboot's licensing, see:
https://coreboot.org/fossology/
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If490f6705e7862d9ad02c925104113b355434101
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: If093dc08c70c521cbef96ac5b5a7a46b37169bcd
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
These Kconfig options were being used basically as #define statements,
which is unnecessary. This isn't a good use of Kconfig options and would
be better just as #defines if actually needed.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If987b50d8ec3bb2ab99096e5e3c325e4d90a67a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This patch moves the line adding hwlib to the include path to the inner
makefile so that it doesn't get added to every build, but only when
CONFIG_USE_SIEMENS_HWILIB=y
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id668b76366a554efff560cec746e637487ebdbf4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77417
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This keeps the vc/amd/pi & pi/00670F00 Makefiles from getting pulled
into the build when they aren't needed.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If600c78c2ba74dd03cf493586dae037b96b7d623
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This change tells the build to only pull vc/eltan/security/Makefile.inc
into the overall build when USE_VENDORCODE_ELTAN is enabled in Kconfig.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I1e462d8cc21c44716463c41cab598588cf4a22c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77418
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Similar situation happened last year when IoT FSP for ADL-S came out
before the Client FSP variant: https://github.com/intel/FSP/issues/83
It seems IoT FSP publishes the MemInfoHob.h file much later due to
legal reasons. Hack the missing file to get the builds using RPL-S IoT
FSP from repo working properly.
This change could be merged, subject for later revert (when the header
file is published).
Change-Id: Iec35db4573a3c3d011e4c1edf1c82a5c34438695
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This patch adds the PsysPmax Upd to FSPM header file.
FSPM:
1. Add 'PsysPmax' UPD
2. Address offset changes
BUG=b:295126631
TEST=Able to build and boot google/rex to ChromeOS.
Change-Id: I892b8c2d75e58a42d3f85006237827da01426ea7
Signed-off-by: Kilari Raasi <kilari.raasi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77244
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Update header files for FSP for Meteor Lake platform to version 3292.83,
previous version being 3223.80.
The patch doesn't include any function changes, only a few comments and
headers have been changed.
BUG=b:295126631
TEST=Able to build and boot google/rex to ChromeOS.
Change-Id: I27f88732bfafd4732ea39bf9c54e18341dd26cf9
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic559b78e6444acec36d437fe3c139b692a3f4d0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77126
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
´config´ is removed from measure list (CB:74750)
Add 'config' to ram_stage_additional_list[] to have it measured and
verified.
BUG=NA
TEST=boot and verify coreboot logs on facebook FBG1701
Change-Id: Id4119bc3a01e11f14a091facf81964d1a71092c1
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I19c029968584fedbb6749e66c7ea2f74a7d580f4
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
On mainboards using Phoenix SoC with PSP verstage enabled, to
accommodate growing number of PSP binaries, multiple smaller hash tables
are introduced. Also some hash tables are in V2 format identifying the
concerned PSP binaries using UUID. Add SVC calls to support multiple
hash tables with different versions.
BUG=b:277292697
TEST=Build and boot to OS in Myst with PSP verstage enabled. Ensure that
all the hash tables are injected successfully. Ensure that PSP validated
all the signed PSP binaries using the injected hash tables successfully.
Change-Id: I64e1b1af55cb95067403e89da4fb31bec704cd4f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76588
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I81ae8acb0365af102e513b3d7cfa1a824636eb06
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76812
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SoC family is able to provide SoC-specific information
via amd/fsp/<soc_family>/soc_dmi_info.h.
Use common amd/fsp/common/dmi_info.h for all AMD platforms.
This way, duplicated dmi_info.h files in
vendorcode/amd/fsp/<soc_family>/ can be removed.
BUG=b:288520486
TEST=Dump `dmidecode -t 17`.
Change-Id: I5e0109af51b78360f7038b20a2975aceb721a7d5
Signed-off-by: Konrad Adamczyk <konrada@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76107
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Phoenix doesn't have an eMMC controller and those UPDs were carried over
from Picasso. The SoC's fsp_m_params.c didn't write to any of those
fields, so this doesn't change any behavior.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie3640c1493a92c1effba3ce42103d022bd8399ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
The dxio_port_param_type enum was copied over from Cezanne, but the enum
on the AGESA/FSP side changed between the generations. Add a TODO as a
reminder that this needs to be updated.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8063ab00a508b045265bab73197c8ca117622800
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76448
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the dxio_link_hotplug_type enum definition for the link_hotplug
field in the DXIO descriptor struct.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ieeb3e3edaed2c689707edc4df7d25c777005fde2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The dxio_port_param_type enum was copied over from Cezanne to Mendocino
to Phoenix, but the enum on the AGESA/FSP side changed between the
generations. Update the definition to match the definition used in the
Phoenix FSP.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3c87fdc8bf0849d797c2af74c1d1495c7d85019f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76447
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The dxio_port_param_type enum was copied over from Cezanne to Mendocino,
but the enum on the AGESA/FSP side changed between the two generations.
Update the definition to match the definition used in the Mendocino FSP.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie4c4d7e4e3eaf7af9a43007363135412633c7440
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76446
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The file for Mendocino and Phoenix still used Cezanne in the comment and
from the file it's already clear to which SoC generation this belongs,
so just drop the SoC name from the comment.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I73e8b01e46904578226bb64e5e4659016c491880
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76440
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch updates the MemInfoHob header file as per Meteor Lake
version 3251.81.
Changes include:
1. Drop DimmDFE structure variable
2. Drop unused macro MAX_COPY_DIMM_DFE_TAPS
BUG=b:290898626
TEST=Able to build and boot google/rex.
w/o this patch:
cbmem -c -1 | grep DIMM
[ERROR] No DIMMs found
w/ this patch:
cbmem -c -1 | grep DIMM
[DEBUG] 8 DIMMs found
Change-Id: I8eed410831399bb4835244f48c14d5ed9e701e68
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76433
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When set to 1, the link_compliance_mode element of the DXIO port
descriptor will cause the corresponding PCIe port to not be trained but
to output a compliance testing pattern instead. Update the comment to
point out that this is only a testing mode.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaabb16c51a0c08391cd2d63b8064c524a748ccb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76441
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
The headers added are generated as per FSP v4221.00
BUG=b:290038558
TEST=Boot to OS
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I23f6e1e4baa39883475cd93fa6aabcec4e7152cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76147
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Update header files for FSP for Meteor Lake platform to version 3223_80,
previous version being 3194_81.
FSPM:
1. Add 'ROWHAMMER','RhSelect','McRefreshRate','Lfsr0Mask','Lfsr1Mask'
UPDs
2. Add 'TmeExcludeBase','TmeExcludeSize','GenerateNewTmeKey' UPDs
3. Address offset changes
BUG=b:287890130
TEST=Able to build and boot google/rex to ChromeOS.
Change-Id: I4b8d0a3a87be7dc0d899298eb8e4e48905090e71
Signed-off-by: Kilari Raasi <kilari.raasi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75916
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Commit d054bbd4f1ba ("Makefile.inc: fix multiple jobs build issue")
added a dependency on $(obj)/fmap_config.h to all .c source files in all
stages, so it's not needed any more to add it as a dependency to files
that include fmap_config.h.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7b62917f32ae9f51f079b243a606e5db07ca9099
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76002
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The prefix POSTCODE makes it clear that the macro is a post code.
Hence, replace related macros starting with POST to POSTCODE and
also replace every instance the macros are invoked with the new
name.
The files was changed by running the following bash script from the
top level directory.
sed -i'' '30,${s/#define POST/#define POSTCODE/g;}' \
src/commonlib/include/commonlib/console/post_codes.h;
myArray=`grep -e "^#define POSTCODE_" \
src/commonlib/include/commonlib/console/post_codes.h | \
grep -v "POST_CODES_H" | tr '\t' ' ' | cut -d ' ' -f 2`;
for str in ${myArray[@]}; do
splitstr=`echo $str | cut -d '_' -f2-`
grep -r POST_$splitstr src | \
cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g";
grep -r "POST_$splitstr" util/cbfstool | \
cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g";
done
Change-Id: I25db79fa15f032c08678f66d86c10c928b7de9b8
Signed-off-by: lilacious <yuchenhe126@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
For Phoenix the lane numbers in the DXIO descriptor match the ones in
the schematic, so remove the corresponding text and the table from the
comment on the fsp_dxio_descriptor struct. Since there's no logical to
physical lane number remapping needed for the lanes in the Phoenix DXIO
descriptors, drop the 'logical' from the start_logical_lane and
end_logical_lane fields in the DXIO descriptor and rename those to
start_lane and end_lane.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I94664fd9d3807370b73f9fae8645d444e5faf7b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch removes the support for edk2-stable202111 as MTL has migrated
to edk2-stable202302, and no other platform is utilizing
edk2-stable202111. The support for edk2-stable202111 is no longer
necessary.
Change-Id: Ide1864e0a42a4c0a81c3c94b1b1254f8fad062af
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75817
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
