| Age | Commit message (Collapse) | Author |
|---|
|
PCI function number takes only 3 bits, therefore
correct bitmask for it is 0x7.
Change-Id: Id41700be0474eecc4d5b5173c4d5686c421735e3
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-on: https://review.coreboot.org/20837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add support of DMI tables for AMD Opteron 6300 Series Processors.
Correct value for CPU family is taken from SMBIOS reference
specification.
Change-Id: I8c5d487c0f45f61deb081be50c6701a42fbf9111
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-on: https://review.coreboot.org/20838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
We define BINARYPI_LEGACY_WRAPPER a method of calling AGESA
via functions in agesawrapper.c file. The approach implemented
there makes it very inconvenient to do board-specific
customisation or present common platform-specific features.
Seems like it also causes assertion errors on AGESA side.
The flag is applied here to all boards and then individually
removed one at a time, as things get tested.
New method is not to call AGESA internal functions directly,
but via the dispatcher. AGESA call parameters are routed to
hooks in both platform and board -directories, to allow for
easy capture or modification as needed.
For each AGESA dispatcher call made, eventlog entries are
replayed to the console log. Also relocations of AGESA heap
that took place are recorded.
New method is expected to be compatible with binaryPI.
Change-Id: I2900249e60f21a13dc231f4a8a04835e090109d5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In AGESA specification AmdInitEnv() is to be called once
host memory allocator has started. In coreboot context this
could mean either availability of CBMEM or malloc heap.
As for AmdS3LateRestore(), there is no requirement to have
it run as part of the romstage either.
Change-Id: Icc8d97b82df89e2480e601d5c2e094de0365b0a5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
We define AGESA_LEGACY_WRAPPER a method of calling AGESA
via functions in agesawrapper.c file. The approach implemented
there makes it very inconvenient to do board-specific
customisation or present common platform-specific features.
Seems like it also causes assertion errors on AGESA side.
The flag is applied here to all boards and then individually
removed one at a time, as things get tested.
New method is not to call AGESA internal functions directly,
but via the dispatcher. AGESA call parameters are routed to
hooks in both platform and board -directories, to allow for
easy capture or modification as needed.
For each AGESA dispatcher call made, eventlog entries are
replayed to the console log. Also relocations of AGESA heap
that took place are recorded.
New method is expected to be compatible with binaryPI.
Change-Id: Iac3d7f8b0354e9f02c2625576f36fe06b05eb4ce
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I09b094b3f129ac3e32608bcbe56f4b3f90c8946b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/20762
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I8d9097100eee68a67091342161d169929c1a74dd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/20696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The parameter shall be FANStartSpeed instead of FANStartpeed.
Change-Id: I977da687ba8d9d0bad4c184cd0945ecaa52286ad
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/20788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add dedicated CAR setup and teardown functions and Kconfig
options to force their inclusion into the build. The .S files
are mostly duplicated code from the old cache_as_ram.inc file.
The .S files use global proc names in anticipation for use with
the Kconfig symbols C_ENVIRONMENT_BOOTBLOCK and POSTCAR_STAGE.
Move the mainboard romstage functionality into the soc directory
and change the function name to be compatible with the call
from assembly_entry.S. Drop the BIST check like other devices.
Move InitReset and InitEarly to bootblock. These AGESA entry
points set some default settings, and release/recapture the
AP cores. There are currently some early dependencies on
InitReset. Future work should include:
* Pull the necessary functionality from InitReset into bootblock
* Move InitReset and InitEarly to car_stage_entry() and out of
bootblock
- Add a mechanism for the BSP to give the APs an address
to call and skip most of bootblock and verstage (when
available) (1)
- Reunify BiosCallOuts.c and OemCustomize.c
(1) During the InitReset call, the BSP enables the APs by setting
core enable bits in F18F0x1DC and APs begin fetching/executing
from the reset vector. The BSP waits for all APs to also
reach InitReset, where they enter an endless loop. The BSP
sends a command to them to execute a HLT instruction and the
BSP eventually returns from InitReset. The goal would be to
preserve this process but prevent APs from rerunning early
code.
Change-Id: I811c7ef875b980874f3c4b1f234f969ae5618c44
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/19755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Update glk header files as per v52_27 FSP code.
Change-Id: I8e313a2b854e60b1ad8a5c6e080641e323de56a8
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-on: https://review.coreboot.org/20673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Fixes warning by GCC 7.1:
note: did you mean to use logical not?
Change-Id: If8167c6fe88135ae89eb795eeda09e6937b1684f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Fixes GCC 7.1 error:
error: '<<' in boolean context, did you mean '<' ?
Change-Id: I1a28522279982b30d25f1a4a4433a1db767f8a02
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
A new UPD named SpiFlashCfgLockDown is added in the FSP-S
header file.
This change is going to come in FSP in the next FSP release.
This patch is pushed to urgently fix the SPI FPR locking issue.
CQ-DEPEND=CL:*414049
BUG=b:63049493
BRANCH=none
TEST=Built and boot poppy
Change-Id: I4725506103781a358b18ee70f4fdd56bf4ab3d96
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Additional UPDs included with FSP 2.5.0:
FspsUpd.h:
*SataRstOptaneMemory
*Additional Upds for Core Ratio limit
FspmUpd.h:
*RingDownBin
*PcdDebugInterfaceFlags
*PcdSerialDebugBaudRate
*PcdSerialDebugLevel
*GtPllVoltageOffset
*RingPllVoltageOffset
*SaPllVoltageOffset
*McPllVoltageOffset
*RealtimeMemoryTiming
*EvLoader
*Avx3RatioOffset
CQ-DEPEND=CL:*388108,CL:*388109
BUG=None
BRANCH=None
TEST=Build and test on Soraka
Signed-off-by: Balaji Manigandan B <balaji.manigandan@intel.com>
Change-Id: Id31ddd4595e36c91ba7c888688114c4dbe4db86a
Reviewed-on: https://review.coreboot.org/20123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change register preservations and fix comments about register
usage accordingly. Do this to avoid use of %mm0-2 registers inside
macros defined in gcccar.inc, as future implementation of
C_BOOTBLOCK_ENVIRONMENT will use them as well.
Adjust caller side accordingly.
Change-Id: Ic76fcc31ae714baf5259d17c41b62a3610aa947b
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/20579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Clean up commentary on AMD_DISABLE_STACK to be clear that
it does a wbinvd to preserve coreboot CBMEM and
value of car_migrated.
Change-Id: I0f5e9c807f7990fcd5ca85f77b9d92312e775d3e
Signed-off-by: Marc Jones <marcj303@gmail.com>
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/20578
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
After modifications:
f12 and f14 are identical
f10 is f14 with invd -> wbinvd modification added to HOOK_F10
f15 is f10 with invd -> wbinvd modification added to HOOK_F15
f15tn is f15 modified to use with TN / KV / KM
Change-Id: I4006fe09c134e5b51f3ee3772d6d150321d27b57
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/20577
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Remove register preservations that are not required and
fix comments about register usage accordingly.
Change-Id: Ibc9ed982ac55e947c100739250db122033348a82
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/20576
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clean up commentary on AMD_DISABLE_STACK to be clear that
it does a wbinvd to preserve coreboot CBMEM and
value of car_migrated.
Change-Id: I1265ed3d1bdf4b22f1a56f68bc53e18cfadc44b2
Signed-off-by: Marc Jones <marcj303@gmail.com>
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also unify __attribute__ ((..)) to __attribute__((..)) and
handle ((__packed__)) like ((packed))
Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/15921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Intial FSP headers with FSP version 1.5.30
Change-Id: I4471c6aa40ff23179b033a873aec1887b8b4370e
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/20069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
These sources are no longer part of build-tests and transition
to soc/ appears to be completed.
Change-Id: I9bc2212f44d79c795e5b8f6d62b6ee3c42de779a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/20502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I0f78cb275ecad732f81c609564a0640f03d2559e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I891cb4f799aaafcf4a0dd91b5533d2f8db7f3d61
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
* Split the existing cflags to a second line to stay under 80 characters
* Correctly identify the libagesa "Stage" by adding the __LIBAGESA__
define to the files when they're compiled. This matches stage
defines such as __BOOTBLOCK__, __ROMSTAGE__, and __RAMSTAGE__. This is
needed to have printk actually show console information on whatever
interface the user has selected, such as the serial port, speaker,
SPI rom, or something else that hasn't been thought of yet.
Change-Id: I2a64414491130275ba06e5bd76e0b01e450174e8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Nothing in the amdlib.c file actually uses the StdHeader structure, so
remove the asserts verifying that it's not null, and remove references
to it from calls.
For now, I've left it in the parameters for the functions for
compatibility, but we might want to remove these at some point as well.
Change-Id: Ib13e9209c8119fdcc3720470aaa9dcdbde6ac388
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The two flags FF_FanReq and FF_Freeze_Dis should be treated as
8 bit values and not as 32 bit. Change the length of these fields to
1 byte and adjust the offset and mask for FF_FanReq.
Change-Id: If5e9e8b16491a33997cc39c3dd9b80f97682adc6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/20431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This requires to also unify the calling convention for
AGESA functions from
AGESA_STATUS (*agesa_func)(UINT32 Func, UINT32 Data, VOID *ConfigPtr)
to
AGESA_STATUS (*agesa_func)(UINT32 Func, UINTN Data, VOID *ConfigPtr)
On systems running 32bit x86 code this will not make a difference as
UINTN is uintptr_t which is 32bit on these machines.
Change-Id: I095ec2273c18a9fda11712654e290ebc41b27bd9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
src/vendorcode/amd/agesa/f15/Include/OptionMemoryInstall.h:3688:7: error:
suggest braces around initialization of subobject
Change-Id: Id086a64205dfffa2d1324993f4164508b57b6993
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ibff31a9960a23f03facbb09e76d6a5d6fbfb5e94
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ifc6a0638c03fa5f3e1007a844e56dfa6f4c71d7e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20326
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Most of these functions go unused most of the time, but in order
to not keep several copies around, let's make sure we are using
the same file everywhere first.
Change-Id: Ie121e67f3663410fd2860b7d619e8a679c57caba
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20325
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Copy northbridge files from northbridge/amd/pi/00670F00
to soc/amd/stoneyridge and soc/amd/common.
Changes:
- update chip_ops and device_ops
- remove multi-node support
- clean up Kconfig and Makefile
Change-Id: Ie86b4d744900f23502068517ece5bcea6c128993
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/19724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Copy cpu/amd/pi/00670F00 to soc/amd/stoneyridge and
soc/amd/common. This is the second patch in the process of
converting Stoney Ridge to soc/.
Changes:
- update Kconfig and Makefiles
- update vendorcode/amd for new soc/ path
Change-Id: I8b6b1991372c2c6a02709777a73615a86e78ac26
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/19723
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Copy the Hudson/Kern code from southbridge/amd/pi/hudson. This
is the first of a series of patches to migrate Stoney Ridge
support from cpu, northbridge, and southbridge to soc/
Changes:
- add soc/amd/stoneyridge and soc/amd/common
- remove all other Husdon versions
- update include paths, etc
- clean up Kconfig and Makefile
- create chip.c to contain chip_ops
Change-Id: Ib88a868e654ad127be70ecc506f6b90b784f8d1b
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/19722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The Siemens mc_apl1 mainboard needs new values from hwilib.
- add Dsave time for board reset
- add backlight brightness for panel setting
- add backlight PWM period
Change-Id: I3a48654ef57c7f8accaabe60e8aec144e4fe5466
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/20159
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The word 'coreboot' should always be written in lowercase, even at the
start of a sentence.
Change-Id: I7945ddb988262e7483da4e623cedf972380e65a2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
from FSP release V030_61
Change-Id: I5ecba08de851ee2e362f9ac31e1fa8bf3dfceebb
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/19605
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The AP sends the Cr50 a request to enable the new firmware image. If
the new Cr50 image was found and enabled, the AP expects the Cr50 to
reset the device in 1 second.
While waiting for the Cr50 to reset, the AP logs a newly defined event
and optionally shuts down the system. By default the x86 systems power
off as shutting those systems down is not board specific.
BRANCH=gru,reef
BUG=b:35580805
TEST=built a reef image, observed that in case cr50 image is updated,
after the next reboot the AP stops booting before loading depthcharge,
reports upcoming reset and waits for it.
Once the system is booted after that, the new event can be found
in the log:
localhost ~ # mosys eventlog list
...
7 | 2017-03-23 18:42:12 | Chrome OS Developer Mode
8 | 2017-03-23 18:42:13 | Unknown | 0xac
9 | 2017-03-23 18:42:21 | System boot | 46
...
Change-Id: I45fd6058c03f32ff8edccd56ca2aa5359d9b21b1
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/18946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The CR50 TPM can do both SPI and I2C communication. However,
there's situations where policy needs to be applied for CR50
generically regardless of the I/O transport. Therefore add
MAINBOARD_HAS_TPM_CR50 to encompass that. Additionally,
once the mainboard has selected CR50 TPM automatically select
MAINBOARD_HAS_TPM2 since CR50 TPM is TPM 2.0.
Change-Id: I878f9b9dc99cfb0252d6fef7fc020fa3d391fcec
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19370
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Bottom five LSBs are used to store the running frequency
of memory clock.
Change-Id: I2dfcf1950883836499ea2ca95f9eb72ccdfb979c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19042
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Updating headers corresponding to FSP 2.0.0
Below UPDs are added to FspmUpd.h
* PeciC10Reset
* PeciSxReset
rest of the changes are update to comments
CQ-DEPEND=CL:*340004,CL:*340005,CL:*340006
BUG=None
BRANCH=None
TEST=Build and test on Poppy
Change-Id: Id8ecea6fa5f4e7a72410f8da535ab9c4808b3482
Signed-off-by: Balaji Manigandan B <balaji.manigandan@intel.com>
Reviewed-on: https://review.coreboot.org/19109
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add package options to the CPU Kconfig that may be selected by the
mainboard's Kconfig file. Stoney Ridge is available in FP4 and FT4
packages and each requires a unique binaryPI image. Default to the
correct blob used by the northbridge by looking at the CPU's package.
Also modify Gardenia to select the right package.
See the Infrastructure Roadmap for FP4 (#53555) and FT4 (#55349) for
additional details for the packages.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: Marc Jones <marcj303@gmail.com>
(cherry picked from commit 7b8ed7b732b7cf5503862c5edc6537d672109aec)
Change-Id: I7bb15bc4c85c5b4d3d5a6c926c4bc346a282ef27
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/18989
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Memory training data that is saved as part of S3 feature in SPI
flash can be used to bypass training on normal boot path as well.
When RegisterSize is 3 in the register playback tables, no register is
saved or restored. Instead a function is called to do certain things in
the save and resume sequence. Previously, this was overlooked, and the
pointer containing the current OrMask was still incremented by 3 bytes.
Change-Id: I7221a03d5a4e442817911ba4862e3c0e8fa4a500
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19041
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch attempts to finish the separation between CONFIG_VBOOT and
CONFIG_CHROMEOS by moving the remaining options and code (including
image generation code for things like FWID and GBB flags, which are
intrinsic to vboot itself) from src/vendorcode/google/chromeos to
src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig
options, and clean up menuconfig visibility for them (i.e. some options
were visible even though they were tied to the hardware while others
were invisible even though it might make sense to change them).
CQ-DEPEND=CL:459088
Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18984
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This callback was only required for a single mainboard, and it can
easily be moved to mainboard-specific code. This patch removes it from
the global namespace and isolates it to the Jecht board. (This makes
it easier to separate vboot and chromeos code in a later patch.)
Change-Id: I9cf67a75a052d1c86eda0393b6a9fbbe255fedf8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18981
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The virtualized developer switch was invented five years ago and has
been used on every vboot system ever since. We shouldn't need to specify
it again and again for every new board. This patch flips the Kconfig
logic around and replaces CONFIG_VIRTUAL_DEV_SWITCH with
CONFIG_PHYSICAL_DEV_SWITCH, so that only a few ancient boards need to
set it and it fits better with CONFIG_PHYSICAL_REC_SWITCH. (Also set the
latter for Lumpy which seems to have been omitted incorrectly, and hide
it from menuconfig since it's a hardware parameter that shouldn't be
configurable.)
Since almost all our developer switches are virtual, it doesn't make
sense for every board to pass a non-existent or non-functional developer
mode switch in the coreboot tables, so let's get rid of that. It's also
dangerously confusing for many boards to define a get_developer_mode()
function that reads an actual pin (often from a debug header) which will
not be honored by coreboot because CONFIG_PHYSICAL_DEV_SWITCH isn't set.
Therefore, this patch removes all those non-functional instances of that
function. In the future, either the board has a physical dev switch and
must define it, or it doesn't and must not.
In a similar sense (and since I'm touching so many board configs
anyway), it's annoying that we have to keep selecting EC_SOFTWARE_SYNC.
Instead, it should just be assumed by default whenever a Chrome EC is
present in the system. This way, it can also still be overridden by
menuconfig.
CQ-DEPEND=CL:459701
Change-Id: If9cbaa7df530580a97f00ef238e3d9a8a86a4a7f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18980
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The correct way to mock out vboot TPM accesses these days is the
CONFIG_VBOOT_MOCK_SECDATA Kconfig option. There are some remnants of
older TPM-mocking infrastructure in our codebase that are as far as I
can tell inert. Remove them.
Change-Id: I3e00c94b71d53676e6c796e0bec0f3db67c78e34
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18977
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
cr50 by default delays nvmem commits internally from the point of
reset to accumulate change state. However, the factory process can
put a board into dev mode through the recovery screen. This state
is stored in the TPM's nvmem space. When the factory process is
complete a disable_dev_request and battery_cutoff_request is performed.
This leads to disabling the dev mode in TPM, but the battery is
subsequently cut off so the nvmem contents never stick. Therefore,
whenever antirollback_write_space_firmware() is called we know there
was a change in secdata so request cr50 to immediately enable nvmem
commits going forward. This allows state changes to happen immediately.
The fallout from this is that when secdata is changed that current
boot will take longer because every transaction that writes to TPM
nvmem space will perform a write synchronously. All subsequent boots
do not have that effect.
It should also be noted that this approach to the implementation is
a pretty severe layering violation. However, the current TPM APIs
don't lend themselves well to extending commands or re-using code
outside of the current routines which inherently assume all knowledge
of every command (in conflict with vendor commands since those are
vendor-specific by definition).
BUG=b:35775104
BRANCH=reef
TEST=Confirmed disablement of dev mode sticks in the presence of:
crossystem disable_dev_request=1; crossystem
battery_cutoff_request=1; reboot;
Change-Id: I3395db9cbdfea45da1f5cb994c6570978593b944
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/18681
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
|
|
In all simplicity, with board/OptionsIds.h file having:
IDSOPT_IDS_ENABLED TRUE
IDSOPT_TRACING_ENABLED TRUE
And src/Kconfig modified to:
config WARNINGS_ARE_ERRORS
default n
With these settings AGESA outputs complete debugging log
where-ever you have your coreboot console configured.
Change-Id: Ie5c0de6358b294160f9bf0a202161722f88059c1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15320
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins)
|
|
We have been forced to build AGESA with ASSERT() as non-fatal
for some board, as hitting those errors is not uncommon.
For the cases touched here, abort eventlog operations early
to avoid further errors and dereference of null pointers.
Change-Id: I1a09ad55d998502ad19273cfcd8d6588d85d5e0c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18543
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Implement threshold as described in AMD.h, and do not add
entries below STATUS_LOG_LEVEL in the eventlog.
Change-Id: Ic9e45b1473b4fee46a1ad52d439e8682d961dc03
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18542
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The event log entry indicating developer mode is useful for the
boot path, but is not really useful on the resume path and removing
it makes the event log easier to read when developer mode is enabled.
To make this work I have to use #ifdef around the ACPI code since
this is shared with ARM which does not have acpi.h.
BUG=b:36042662
BRANCH=none
TEST=perform suspend/resume on Eve and check that the event log
does not have an entry for Chrome OS Developer Mode.
Change-Id: I1a9d775d18e794b41c3d701e5211c238a888501a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18665
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Definition is required to enable use of printk() from AGESA proper.
Change-Id: I6666a003c91794490f670802d496321ffb965cd3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18544
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add the MemInfoHob.h provided by FSP v1.6.0 for aid in parsing the
MEM_INFO_DATA_HOB.
BUG=chrome-os-partner:61729
BRANCH=none
TEST=Build and boot KBLRVP
Change-Id: Ia2b528ba4d9f093006cc12ee317d02e7f3e83166
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/18326
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I3395e274e0ba43de7e7306daedeb26c75de65ee1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18327
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Update FSP UPD header files as per version 1.6.0.
Below UPDs are added to FspsUpd.h:
* DelayUsbPdoProgramming
* MeUnconfigIsValid
* CpuS3ResumeDataSize
* CpuS3ResumeData
CQ-DEPEND=CL:*322871,CL:*323186,CL:*322870
BUG=None
BRANCH=None
TEST=Build and boot on RVP3 and poppy
Change-Id: Id51a474764a28eec463285757d0eb8ec7ca13fd1
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/18289
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The FSP UPD offsets and the corresponding structure size do not match,
CpuConfigData.h needs an update to align the same. Hence update the
header file based on FSP version 1.4.0.
BUG=chrome-os-partner:61548
BRANCH=none
TEST=Built and booted KBLRVP and verify that all UPDs are in sync in
both coreboot and FSP.
Change-Id: I5ef7cbb569c3d1a44e7846717201952a0acf12ab
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/18285
Tested-by: build bot (Jenkins)
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This reverts commit 580db7fd9036134b1da4fe7340e306fee4681659.
There's a (parallel) mechanism more closely aligned with how the values
are filled in (fixed device part + version string) that landed from
Chrome OS downstream (see commit 4399b85fdd).
Change-Id: I5ccd06eadabb396452cc9d1d4dff780ea0720523
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18205
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
These updated header files contain USB tuning parameters as well as
some general cleanup of unused parameters in the UPD Headers. This
patch along with the upcoming FSP 1.3.0 release will allow for USB
tuning on apollolake platforms.
CQ-DEPEND=CL:*315403
BUG=chrome-os-partner:61031
Change-Id: Id7cce1ea83057630d508523ada18c5425804535e
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/18046
Reviewed-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
On Chrome OS devices that use TPM2 parts the platform hierarchy
is disabled by the boot loader, depthcharge. Since the bootloader
isn't involved in resuming a suspended machine there's no equivalent
action in coreboot to disable the platform hierarchy. Therefore, to
ensure consistent state in resume the platform hierarchy in the TPM2
needs to be disabled as well. For systems that resume using the
firmware the platform hierarchy is disabled when utilizing
TPM2 devices.
BUG=chrome-os-partner:61097
BRANCH=reef
TEST=Suspend and resume. Confirmed 'stop trunksd; tpmc getvf; start
trunksd' shows that phEnable is 0.
Change-Id: I060252f338c8fd68389273224ee58caa99881de8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/18096
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Build issues were somehow overlooked in commit
ed840023a84915ece4bc63edffef979926107d55:
1. hexstrtobin is not defined (needs the lib.h);
2. coreboot default compiler doesn't like variable initialization
within for loop.
BUG=chrome-os-partner:60821
TEST=Build and boot lars and reef
Change-Id: Ie52c1f93eee7d739b8aaf59604875f179dff60d0
Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-on: https://review.coreboot.org/18076
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
A VPD entry "wifi_sar" needs to be created which contains a heximal
encoded string in length of 40 bytes. get_wifi_sar_limits() function
retrieves and decodes the data from the VPD entry, which would later
be consumed by platform code.
BUG=chrome-os-partner:60821
TEST=Build and boot lars and reef
Change-Id: I923b58a63dc1f8a7fdd685cf1c618b2fdf4e7061
Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-on: https://review.coreboot.org/17958
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Also remove config.h, kconfig.h will pull that one in.
Change-Id: I798b3ffcf86fca19ae4b0103bb901a69db734141
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17667
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ie67e1f7887e8df497d7dfd956badd9e06fd5d8a3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1254651
Reviewed-on: https://review.coreboot.org/17833
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Code is copied from agesa/common's amdlib.c.
Things can probably be deduplicated.
Change-Id: I9c8adab5db7e9fd41aecc522136dfa705c1e2ee6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1229662
Reviewed-on: https://review.coreboot.org/17834
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins)
|
|
In the factory it's helpful for knowing when a system being
built is meant for release with all the security features
locked down. Provide support for exporting this type of pin
in the acpi tables.
BUG=chrome-os-partner:59951
BRANCH=reef
Change-Id: Iec70249f19fc36e5c9c3a05b1395f84a3bcda9d0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17802
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
BUG=chromium:595715
BRANCH=none
TEST=/build/$board/firmware/coreboot.rom has a zeroed out SHARED_DATA
region if it exists.
Change-Id: Ib1e6fd62bcf987872890c6d155287dcedb0b1f40
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e8a88bf744f44d034f8606a556014e2bee37eda1
Original-Change-Id: I0b59f1f0e2f8645000f83cb3ca7f49e4da726341
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/417821
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://review.coreboot.org/17789
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Chrome OS images have three firmware ID regions, to store version
information for the read-only and the two read-write areas. Fill them
with a suitable default and allow configuring a different scheme.
There's already an override in google/foster and google/rotor to match
the naming scheme used so far (in depthcharge).
BUG=chromium:595715
BRANCH=none
TEST=/build/$board/firmware/coreboot.rom has the expected values in the
regions.
Change-Id: I5fade5971135fa0347d6e13ec72909db83818959
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d2e3be81faa8d21f92325294530714a4b18a1b3e
Original-Change-Id: I2fa2d51eacd832db6864fb67b6481b4d27889f52
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/417320
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://review.coreboot.org/17788
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The compilation would fail if CFG_MEMORY_LRDIMM_CAPABLE == FALSE
and BLDOPT_REMOVE_LRDIMMS_SUPPORT == TRUE.
Change-Id: I1be37e368bc4ed07e59d0f0bb967bed11143a65b
Signed-off-by: Łukasz Dobrowolski <lukasz@dobrowolski.io>
Reviewed-on: https://review.coreboot.org/17354
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
We have kconfig.h auto-included and it pulls config.h too.
Change-Id: I665a0a168b0d4d3b8f3a27203827b542769988da
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17655
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
While searching for a field in all blocks ensure that the checked block
is available and can be used. In this way a field can be retrieved from
every block and not just the first one.
Change-Id: Idbd7656ab0664763cb065f5e817193ad1d9e0871
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/17670
Tested-by: build bot (Jenkins)
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Add header files as is from FSP build output without any adaptations.
Change-Id: Ic4b33c42efe8c9dbe9f9e2b11bf6344c9487d86e
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17556
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This header update contains updates for skipping punit as well as some
MRC related UPD values.
BUG=chrome-os-partner:60068
BRANCH=none
TEST=built with FSP 1.2.3 and MRC patches for coreboot
CQ-DEPEND=CL:*307357
Change-Id: I8c66c0c0febba5e67ae3290034e9b095c9e68f07
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/17631
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add the location of HWID field so that hwilib supports this
value as well.
Change-Id: If6d4695f861232231ac8f9c247c0a10410dac1c5
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/17575
Tested-by: build bot (Jenkins)
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
When IDSOPT_TRACING_ENABLED is TRUE build fails with
"cast from pointer to integer of different size"
Use "UINTN" as is done in Family 16h.
Change-Id: I362e67fc83aa609155f959535f33be9c150c7636
Signed-off-by: Łukasz Dobrowolski <lukasz@dobrowolski.io>
Reviewed-on: https://review.coreboot.org/17406
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Instead of defining the same functions for reading/clearing boot-mode
switches from EC in every mainboard, add a common infrastructure to
enable common functions for handling boot-mode switches if
GOOGLE_CHROMEEC is being used.
Only boards that were not moved to this new infrastructure are those
that do not use GOOGLE_CHROMEEC or which rely on some mainboard specific
mechanism for reading boot-mode switches.
BUG=None
BRANCH=None
TEST=abuild compiles all boards successfully with and without ChromeOS
option.
Change-Id: I267aadea9e616464563df04b51a668b877f0d578
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17449
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=chrome-os-partner:59352
BRANCH=None
TEST=Compiles successfully
Change-Id: I87cd675ea45a8b05a178cf64119bf5f9d8d218ca
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17408
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Provide an option to deliver the mainboard smbios version in the
form of 'rev%d' based on the board_id() value.
BUG=chromium:663243
Change-Id: If0a34935f570612da6e0c950fd7e8f0d92b6984f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17290
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Add Stoney specific code subtree and fix Makefles and Kconfig files.
Original-Author: Charles Marslett <charles@scarlettechnologies.com>
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit 51a187a3d08a425ef0cc141a7ddc49a70ac931b1)
Change-Id: I13c6b08c780e7bd2abd0fabbde1a89686132f65c
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17196
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Make changes to the vendorcode files that allow them to work
with the binaryPI. This fixes various compile issues and
establishes a common calling convention between coreboot and
AGESA.
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit f7ea2785d70bd6813b5b4d315b064802251d9557)
Change-Id: Ie36228476a9dbd7b83f95828ca9c7252cecd8ec8
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17195
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Make exact copies of the AGESA files from the Stoney PI package
replacing existing versions. Change the license text and fix
up misc. whitespace.
This will facilitate the review of binaryPI changes in the
vendorcode directory.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: Marc Jones <marcj303@gmail.com>
(cherry picked from commit 1097249585ab76fab59dcfbf8e7a419f34fcfcb6)
Change-Id: I9951df58aeab2d533efc0a837ce35f343ff28d7c
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17194
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Prepare for new 00670FF00 support.
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit ca53cac5c847c55e56ad6f5feb382c04f33ae77a)
Change-Id: Ib48b1611bf70ec302c50f6e07bd2b3d9b09e0a24
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17193
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
String format required two arguments however those
were packaged in ( , ) so the left one was ignored.
Change-Id: I59698319d5ff4215f296356147b4e22229cc9245
Signed-off-by: Łukasz Dobrowolski <lukasz@dobrowolski.io>
Reviewed-on: https://review.coreboot.org/17118
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
These header files contain a few new UPDs. The EnableS3Heci2
UPD will be used to save ~100ms from the S3 resume time on
Apollolake chrome platforms.
BUG=chrome-os-partner:58121
BRANCH=none
TEST=built coreboot for reef and verified no regressions
Change-Id: I1f324d00237c7150697800258a2f7b7eed856417
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/16869
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The AGESA_BINARY_PI_LOCATION Kconfig symbol was declared as a string.
Change it to a hex value.
Change-Id: Ifd87b6c8dfcdf950aea9b15a6fea45bb72e8b4e9
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16835
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Kconfig hex values don't need to be in quotes, and should start with
'0x'. If the default value isn't set this way, Kconfig will add the
0x to the start, and the entry can be added unnecessarily to the
defconfig since it's "different" than what was set by the default.
A check for this has been added to the Kconfig lint tool.
Change-Id: I86f37340682771700011b6285e4b4af41b7e9968
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16834
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Add Kconfig values to select the FSP setup:
* FSP version: 1.1 or 2.0
* Implementation: Subroutine or SEC/PEI core based
* Build type: DEBUG or RELEASE
* Enable all debugging for FSP
* Remove USE_FSP1_1 and USE_FSP2_0
Look for include files in vendorcode/intel/fsp/fsp???/quark
BRANCH=none
BUG=None
TEST=Build FSP 1.1 (subroutine) and run on Galileo Gen2
Change-Id: I3a6cb571021611820263a8cbfe83e69278f50a21
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16806
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add header files as is from FSP build output.
Move the FSP header files to new location as in apollolake.
Update all the FSP structure references now that they are
typedef'd.
Change-Id: I148bff04c064cf853eccaaaf7a465d0079c46b07
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/16517
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Commit e96543e1 (vendorcode/intel: Add UDK 2015 Bindings)
had an extra underscore at the end of one of the make lines that
we missed in the review. Remove it.
Fixes this build warning:
.../Makefile.inc:34: Extraneous text after `ifeq' directive
Change-Id: I0bc76d827207b4f641ac5ff08f540a114347533b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16411
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
FSP header files should be located in vendorcode, not soc directory.
This patch includes changes any references to the old location to
the new location.
Change-Id: I44270392617418ec1b9dec15ee187863f2503341
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/16310
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add UDK 2015 Bindings for FSP header compatibility.
These bindings add the necessary code to read FSP Headers
without any modifications from FSP Source.
BUG=chrome-os-partner:54100
BRANCH=none
TEST=built coreboot image and verified boot
Change-Id: I2887f55b6e63cd0a2b2add9a521be9cfaf875e7d
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/16307
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instead of assuming SPI backing use a region_device to
abstract away the underlying storage mechanism.
BUG=chrome-os-partner:55932
Change-Id: I6b0f5a7e9bea8833fb1bca87e02abefab63acec3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16204
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
CONFIG_VBOOT was recently moved to be independent from CONFIG_CHROMEOS.
However, the latter still has some 'select' clauses to ensure that
required TPM libraries are built. The TPM is an essential part of vboot,
and without these libraries the vboot code cannot compile... therefore,
they should be moved under CONFIG_VBOOT.
Change-Id: I0145558e5127c65c6a82d62f25b5a39e24cb8726
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16229
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This option is no longer used in the code base. Remove it.
BUG=chrome-os-partner:56151
Change-Id: Ia73cce7546c9839518c9e931b03c50856abc2018
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16186
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch enables the CHROMEOS_RAMOOPS_NON_APCI Kconfig option as a
default across all non-x86 Chrome OS boards.
CQ-DEPEND=CL:367905
BRANCH=None
BUG=None
TEST=See depthcharge CL.
Change-Id: If14ef4f9b1bd480f2d52df3892c73059bb9b07d5
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 8c3b74fb21aadd6de7af62f32fa98fc211d75085
Original-Change-Id: I16ff7f68762a995cd38e5fddaf6971d4b9f07e21
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/368010
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16154
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add FSP 2.0 header files, these files are common for Skylake
and Kabylake, name the folder as skykabylake to signify the same.
Change-Id: I71b43a59c9a9b0adf1ee48285e4a72e24a13df2d
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/16050
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
|
|
Switch from passing FSP the serial port address to passing FSP the
serial port output routine. This enables coreboot to use any UART in
the system and also log the FSP output.
TEST=Build and run on Galileo Gen2
Change-Id: I67d820ea0360a3188480455dd2595be7f2debd5c
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16105
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I6b21822d60d379cb8cd21b69c714a437bb7977ce
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1254643 and others
Reviewed-on: https://review.coreboot.org/16112
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Remove the TODO message from FspUpdVpd.h
TEST=Build and run on Galileo Gen2
Change-Id: Icd565c6062ef59b1e4a68310bb6f9ed62fb014af
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16114
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
|
