| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I6e94f44d50f2b53855adc1bb1cd6a1a5d9929003
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84549
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The declarations describing interface functions between SoCs
and openSIL glue code are common for the stub and Genoa POC,
and likely with future SoC openSIL implementations. Therefore,
move these out of SoC-specific header files and into
vc/amd/opensil/opensil.h.
This change facilitates swapping out the stub for the actual
openSIL glue code.
Change-Id: Icc8783ddb868f9f0c4cd357245604313eadfe531
Signed-off-by: Nicolas Kochlowski <nickkochlowski@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84428
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
FSP n-1 headers in vc/intel/fsp/fsp2_0/graniterapid are updated to
pass compilation with full platform codes.
Change-Id: I1d13ddd4db8409a4928bd1bf152a9c284d138e48
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch skips event logging for current boot information at ramstage
if CSE sync is scheduled at payload. Given that CSE sync could initiate
a system reset, resulting in redundant boot information logs, the
payload should handle the logging of boot information following CSE
sync.
BUG=b:360082747
TEST=Verified elog boot info is not logged at ramstage
Change-Id: Ia29ec350facc6850c04bb988027ecb146e648a50
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84120
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update generated FSP headers for ADL-N to MR5(5132_00)
Change-Id: I96fccbb92866fbc18c57187628612fda655cd7a7
Signed-off-by: KunYi Chen <kunyi.chen@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Extend support for CrashLog to Intel Jasperlake based platforms.
This commit is based on 15cbc3b5996ae64aff2e4741c4c3ec3d7f5cc1a7,
originally reviewed on https://review.coreboot.org/c/coreboot/+/49943.
BUG=b:354834461
TEST=CrashLog can be enabled in Kconfig for Jasperlake based platforms
and can generate a BERT table, if enabled.
Change-Id: Ia18a79d8de849d556b4b8fd0e6b43090311eb23f
Signed-off-by: Jędrzej Ciupis <jciupis@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
We were previously at Wuffs 0.4.0-alpha.2. The C file was copied from
https://github.com/google/wuffs-mirror-release-c and its hash matches
https://github.com/google/wuffs-mirror-release-c/blob/90e4d81a6a8b7b601e8e568da32a105d7f7705e5/sync.txt#L9-L10
$ sha256sum src/vendorcode/wuffs/wuffs-v0.4.c
6c22caff4af929112601379a73f72461bc4719a5215366bcc90d599cbc442bb6 src/vendorcode/wuffs/wuffs-v0.4.c
Change-Id: Ie90d989384e0db2b23d7d1b3d9a57920ac8a95a2
Signed-off-by: Nigel Tao <nigeltao@golang.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83894
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch introduces a new early sign-of-life config option when
libgfx or uGOP is enabled for early graphics initialization.
BUG=b:352651132
TEST=Able to build google/rex and google/tivviks
Change-Id: Ic8fe4ca5234de7f8e579f950f6ccbf750f4c7950
Signed-off-by: Jayvik Desai <jayvik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83705
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Details:
- Skeleton files to compile google/fatcat mainboard.
BUG=b:348678529
TEST=Build verified on with using PTL SOC and google/fatcat mainboard.
Change-Id: I4c069ba64f487259ce746dc52296618d91209602
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83732
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
|
|
Update header files for FSP for Raptor Lake refresh platform to
version 5045_00, previous version being 4435_00.
FSPM:
1. Add IgdGsm2Size UPD
2. Comment added for Offset 0x0AB6
FSPS:
1. Add CepEnable UPD
2. Offset size updated for UPD ReservedCpuPostMemProduction
2. Comment added for Offset 0x104C
MemInfoHob:
1. Structure updated
BUG=b:355384183
Kit:https://www.intel.com/content/www/us/en/secure/design/confidential/
software-kits/kit-details.html?kitId=815173
Cq-Depend: chrome-internal:7554984
Change-Id: I80cccb6aaa8f3a97d860a1e7908bfac0435b1aec
Signed-off-by: Kulkarni, Srinivas <srinivas.kulkarni@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Change-Id: I333b137c1dc08a3c06bdd3f7a78ca44a5dd043cc
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83192
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
To avoid having constructs like 'dev->path.domain.domain' in the SoC
code, create the 'dev_get_domain_id' helper function that returns the
domain ID of either that device if it's a domain device or the
corresponding domain device's domain ID, and use it in the code.
If this function is called with a device other than PCI or domain type,
it won't have a domain number. In order to not need to call 'die',
'dev_get_domain_id' will print an error and return 0 which is a valid
domain number. In that case, the calling code should be fixed.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3d79f19846cea49609f848a4c42747ac1052c288
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83644
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Add Usb4CmMode & CnviWifiCore Upd support in FspsUpd.h
- Update UPD Offset in FspsUpd.h
BUG=b:354612775
TEST=Able to build and boot google/Tivviks
Change-Id: Ia68b6aa90c782a359b594f381e223772a897c6e6
Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch enables LZMA or LZ4 compression algorithm for the logo cbfs
file based on BMP_LOGO_COMPRESS_LZMA or BMP_LOGO_COMPRESS_LZ4 Kconfig.
Logo cbfs file is compressed based on CBFS_COMPRESS_FLAG, by default.
Based on logo file content and target platform, enabling LZ4 could
save significant boot time, with increase in file size.
For brox:
cb_logo LZ4 is +1265 bytes than LZMA, saves ~0.760ms in decomp.
cb_plus_logo LZ4 is +2011 bytes than LZMA, saves ~0.880ms in decomp.
BUG=b:337330958
TEST=Able to boot brox and verified firmware splash screen display
with LZMA and LZ4 compression.
Change-Id: I57fbd0d3a39eaba3fb9d61e7a3fb5eeb44e3a839
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83420
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib757c0548f6f643747ba8d70228b3d6dfa5182cd
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82752
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for the configuration of 320MHz Bandwidth per MCC based on
countries. The implementation follows document #559910 Intel
Connectivity Platforms BIOS Guidelines revision 8.3.
BUG=b:333804562
BRANCH=firmware-rex-15709.B
TEST=WBEM method is added to the CNVW device and return the data
supplied by the SAR binary blob
Change-Id: Ie76794825f1a0104d199c078aa4ffc714aa95b17
Signed-off-by: Poornima Tom <poornima.tom@intel.com>
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81790
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The 'Bluetooth Increased Power Mode - SAR Limitation' feature provides
ability to utilize increased device Transmit power capability for
Bluetooth applications in coordination with Wi-Fi adhering to product
SAR limit when Bluetooth and Wi-Fi run together.
This commit introduces a `bluetooth_companion' field to the generic
Wi-Fi drivers chip data. This field can be set in the board design
device tree to supply the bluetooth device for which the BRDS function
must be created.
This feature is required for Meteor Lake rex karis variant.
The implementation follows document 559910 Intel Connectivity
Platforms BIOS Guideline revision 8.3 specification.
BUG=b:348345301
BRANCH=firmware-rex-15709.B
TEST=BRDS method is added to the CNVW device and return the data
supplied by the SAR binary blob
Change-Id: Iebe95815c944d045f4cf686abcd1874a8a45e209
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83200
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
device/device.h provides the definition of struct device.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id1c3c09665e3eedec6055f4a0586016c5a5537bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83083
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update generated FSP headers for Alder Lake N from v5021.00
Changes include:
- Add FspProducerDataHeader.h header file
- Open Usb4CmMode & CnviWifiCore Upd in FspsUpd.h
- Update UPD Offset in FspsUpd.h
BUG=b:296433836
TEST=Able to build and boot google/nivviks
Change-Id: Ieb4cc8f2f83d8f6e821894f0ec2e56262a25743c
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82780
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This reverts commit 79503ef515967ffceab7bd2a16a381e6a02c3d30.
The Intel FSP repository at https://github.com/intel/FSP.git currently
lacks the Client ADL-N headers. The existing coreboot code references
the "IoT/AlderLakeN/" directory for these headers, but it is missing the
crucial FspProducerDataHeader.h file. Without this header, the ADL-N
platform is unable to utilize the appropriate MRC version needed for
updating MRC caches. This patch aims to restore the necessary FSP
headers for the ADL-N platform within the vendorcode directory.
Change-Id: I99e9d5a07b4ca8d1666e3fd50d3d363ed5d4618e
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This commit removes config guard around FSPM_ARCH_UPD from the
FspApi.h header file. This change is done to ensure
that this header file can be used with both x86_32 and x86_64
architectures and also with different FSP specification versions.
The following modifications are made:
- Removes PLATFORM_USES_FSP2_X86_32 config guard around
FSPM_ARCH_UPD, this was added to isolate the structure from
x64 build. This is not really required since the x64 build uses
FSP2.4 structures.
BUG=b:343428206
TEST=Verified x86_32 and x86_64 builds on Meteor Lake board (Rex)
Change-Id: Idc849de73723036323f81dfd055730f6669cd52e
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82425
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This commit introduces new header files of V3471.91 for the x86_64
architecture in the fsp2_0/meteorlake directory. FSP2.4 brings FSP
64-bits support and the soc Kconfig file has been updated to select
this new header path when FSP2.4 is in use.
BUG=b:329034258
TEST=Verified x86_32 and x86_64 builds on Meteor Lake board (Rex)
Change-Id: Ib41b57e794311db729ac65a968f562aa127e86c3
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
This commit moves FSP V3471.91 header files for Meteor Lake
into a new x86_32 directory to better organize the files based
on the architecture. The Kconfig file has been modified accordingly
to reflect the new paths of the relocated headers.
BUG=b:329034258
TEST=Verified x86_32 and x86_64 builds on Meteor Lake board (Rex)
Change-Id: Id30186a8b1b5a9082f498e18a3378f5e9907b668
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82424
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
<stdio.h> header is used for input/output operations (such as printf,
scanf, fopen, etc.). Although some input/output functions can manipulate
strings, they do not need to directly include <string.h> because they
are declared independently.
Change-Id: Ibe2a4ff6f68843a6d99cfdfe182cf2dd922802aa
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82665
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The chip drivers in the devicetree use the path where the corresponding
chip.h file resides both to include this chip.h file in the static.c
generated by util/sconfig from the devicetree and also for the names of
the chip config and chip ops struct. To be able to build a SoC using
either the MPIO chip driver from the openSIL stub or from the actual
openSIL glue code without needing different devicetree files for the
different cases, introduce a common MPIO chip.h file that then includes
the correct MPIO header file. The chip config and ops structures also
need to be renamed to take this change into account.
Thanks to Matt for pointing out how to make the path to the actual MPIO
chip.h file configurable via a Kconfig setting. This allows overriding
this path from site-local without the need to have any reference to
site-local in the upstream code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iead97d1727569ec0d23a2b9c4fd96daff4bebcf6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82262
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idef3b661b1cf3008373e61e0760a7dd3b9e9fede
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82261
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
RAMOOPS memory region was being overwritten by coreboot bmp_load_logo()
function. The CBMEM_ID_FSP_LOGO region created during bmp_load_logo()
was overlapping with RAMOOPS space created earlier. This resulted in
memory corruption of RAMOOPS buffer.
To prevent this, the RAMOOPS region allocation is moved to
BS_DEV_INIT_CHIPS phase from earlier BS_WRITE_TABLES phase of boot.
BUG=b:332910298
TEST=build and boot coreboot image on google/rex HW. Check RAMOOPS
CBMEM region creation using cbmem -l command
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: Ibae06362cd80eacb16f6cf0eed8c9aa1fbfb2535
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82042
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eran Mitrani <mitrani@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
In the non-stub openSIL coreboot glue code, this can be used to add the
ALIB SSDT.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3ccd2e81211417ad4ac94f208572e0fa4e1cf97c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82012
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I18bf67cae7af90a92a030e552af6dc6b134a8357
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This change refactors EDK2 essential header management within the FSP
directory to ensure compatibility.
Header selection is now dynamically based on:
* FSP specification version: Distinguishes between 1.1 and 2.x
* EDK2 revision (for FSP 2.x): Chooses the appropriate FSP info header
FSP Header
|
|-> FSP 1.1 specification FSP_INFO_HEADER
|-> FSP 2.0 specification EDK2 release
|-> EDK2_2017 FSP_INFO_HEADER
|-> EDK2_2020 FSP_INFO_HEADER
|-> EDK2_2021 FSP_INFO_HEADER
|-> EDK2_2023 FSP_INFO_HEADER
Any .C/.H file requires to include FSP_INFO_HEADER can now just add the
FSP header alone.
BUG=b:242829490
TEST=Able to build google/rex0 with 64-bit FSP.
Change-Id: I29e5002821843c9cffbc8f6317d1062175f014ff
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81623
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch introduces the FSP_SIG macro into EDK2 headers to ensure
compilation compatibility when using FSP 2.x specifications.
Previously, the macro was only defined for FSP 1.1.
BUG=b:242829490
TEST=Successful build of google/rex0 with 64-bit FSP.
Change-Id: I4f97fc303ca2881ccd17b4d149d01c3b671dbbde
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
It does not hurt to do this and makes it possible to link romstage
sources into bootblock.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ic7edfdac43c2d71ee3dcbd9d8f59c9799595e7f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79576
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GNR N-1 FSP headers are a set of stub headers used to fulfill
build sanity check for GNR SoC and CRB codes before the formal
FSP headers are published. The N-1 headers are forward compatible
with the later formal headers.
Change-Id: I1c8125dd64e5a9619073c2f17aeade1d33607870
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This prepares the code for enabling both CONFIG_TPM1 and CONFIG_TPM2
during compilation, in which case actual TPM family in use can be
determined at runtime.
In some places both compile-time and runtime checks are necessary.
Yet in places like probe functions runtime state checks don't make sense
as runtime state is defined by results of probing.
Change-Id: Id9cc25aad8d1d7bfad12b7a92059b1b3641bbfa9
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69161
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
No functional changes. Refactor code such that there won't be any
compiler or linker errors if TSS 1.2 and TSS 2.0 were both compiled
in.
One might want to support both TPM families for example if TPM is
pluggable, while currently one has to reflash firmware along with
switching TPM device.
Change-Id: Ia0ea5a917c46ada9fc3274f17240e12bca98db6a
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
To bring genoa_poc more in line with the other AMD SoCs, move the
reporting of the memory map up to cbmem_top from the openSIL-specific
add_opensil_memmap function to read_soc_memmap_resources. This is a
preparation for making this code common for all newer AMD SoCs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic06282baa3bb9a65d297b5717697a12d08605d2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81388
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Print that the MPIO chip of one of the MPIO-related PCI device functions
is unused and is skipped, if the type is IFTYPE_UNUSED and the
corresponding PCI device function isn't enabled. This allows to
differentiate between this case and the case where the type isn't
IFTYPE_UNUSED.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4fc28d39a229494b487b300b28f92bf3adad66f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
When the chip of one of the MPIO-related PCI device functions has the
type IFTYPE_UNUSED, there is no corresponding MPIO engine, so replace
'engine' with 'chip' in the warning.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0f55a3f8e1d220d4eb7b0287d03b7af2e5d2889f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81383
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Only report the port as present in the MPIO_PORT_DATA_INITIALIZER_PCIE
macro parameter when the device is enabled; otherwise report the port as
disabled.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ieaa2af6c5ff3fc7e25992e7fdf14d37ee4a57d62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81342
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Since we're already passing a pointer to the corresponding device to
per_device_config, we don't need to pass the chip_info as separate
parameter. Before moving the PCIe port function device below the MPIO
chip, the chip_info struct was from a different device, so that change
allows this simplification.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0466f7ad2f5c9874d45712fa9f89b978bd2a09bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Move the gpp_bridge_* device functions that are bridges to the external
PCIe ports below the corresponding mpio chip. This avoids the need for
dummy devices and does things in a slightly more coreboot-native way.
TEST=PCIe lane config reported by openSIL is identical
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Varshit Pandya <pandyavarshit@gmail.com>
Change-Id: I7e39bf68d30d7d00b16f943953e8207d6fe9ef41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81340
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch is to add FspProducerDataHeader.h header file to support MRC
version Info in TWL.
BUG=b:296433836
Change-Id: Ie33c681676d2a699b7aec8185dbdb90555ef8fe2
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81037
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Remove those MSVC compiler defaults checks so that the GCC defaults for
wchar_t can be used with UDK_202111_BINDING Kconfig.
Compilation error:
src/vendorcode/intel/edk2/edk2-stable202111/MdePkg/Include/Base.h:807:25:
error: static assertion failed: "sizeof (L\'A\') does not meet UEFI
Specification Data Type requirements"
src/vendorcode/intel/edk2/edk2-stable202111/MdePkg/Include/Base.h:807:25:
error: static assertion failed: "sizeof (L\"A\") does not meet UEFI
Specification Data Type requirements"
BUG=b:296433836
TEST=Able to build google/crassk with UDK_202111_BINDING.
Change-Id: Ib2716436a910b43a5e546afdedb9eec88c5da8c6
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81328
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Bitfields with signed integers are not valid C code. This fixes
compilation with clang v16.0.6.
Change-Id: I0b2add2f1078a88347fea7dc65d422d0e5a210a1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80638
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add IFTYPE_UNUSED as first element to the mpio_type enum. This allows
checking if the type was set in the devicetree, since the default will
now be IFTYPE_UNUSED. If the type is set to IFTYPE_UNUSED although the
corresponding PCI device function, a warning is printed and the PCI
device function is disabled.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I85e2589c021b4f05662369fd551146b6f2fa0ad4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add an IFTYPE_ prefix to all elements of the mpio_type enum to have more
specific names.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I229a3402c36941ee5347e3704fcf8d8a1bbc78a6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81338
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change the prefix of the elements of the mpio_engine_type enum from
ENGINE_ to IFTYPE_.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Matt DeVillier <matt.devillier@gmail.com>
Change-Id: If81c5ea01ba147b71b423004a2199b348ffac99a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81346
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Add a 'depends on' statement so that path/to/opensil/source is only
active when the stub is not built.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ic050ff0fa3f428e6adff3357f476fcd8a88cdf7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81189
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove those MSVC compiler defaults checks so that the GCC defaults for
wchar_t can be used. The FSP interface does not depend on wchar_t.
TEST: the resulting binaries are the same for intel/mtlrvp
Change-Id: I0ee1abc7e9ba46665838b63a6cfe0f4aa300114c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
Add a stub MPIO chip driver to the openSIL stub code, so that the
devicetree entries needed for the MPIO chip can already be added to the
mainboard's devicetree files. This driver won't do anything, but still
allows the register settings in the devicetree to be set to make
switching over to the actual openSIL code and the corresponding glue
code easier.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib4f5c232859b9abcd10bfa5c21e2f2c3a70b4b0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Update header files for FSP for Meteor Lake platform to version 3471_91,
previous version being 3471_85.
FSPM:
1. Address offset changes
BUG=b:327688959
TEST=Able to build and boot google/rex to ChromeOS.
Change-Id: I5a71232018dfefec63b0a83d1e87717e238a4a0a
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80782
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the GiB define to make the 4 GiB boundary used in some places in the
code a bit easier to read.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I81877a5d293c883d2e31bdb18ae3b22b8a44e62f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use get_top_of_mem_below_4gb instead of open-coding the functionality.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5885e9ad89ed9f0aa657c56804e98c352267267f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Move MEM_ADDR_64MB_SHIFT_BITS from FSP headers to Xeon-SP common layer
to reduce the dependency.
TEST=intel/archercity CRB
Change-Id: I4e1a652ad58233f7514cb9b23813d75144b8d435
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This reverts commit b5f6320c694766d10023fe8f5183c9c143441b2b.
ADL-N FSP uses 202111 Edk2. There are structure definition changes
between 202005 and 202111. One of change is in FSP_INFO_HEADER structure.
This patch is to bring back support of edk2-stable202111.
BUG=b:296433836
TEST=Able to build google/crassk.
Change-Id: Id1d3e2c5b368a479e637f3ab3d18e242607849ed
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
* Introduces logic to display context-specific boot splash logos.
* Logo selection considers:
* Chromebook-Plus hardware compliance (using factory_config).
* VPD-based product segmentation (soft-branded vs. regular
chromebook).
* Default Chromebook logo as fallback for regular Chromebook.
This patch fixes the problem where existing logic was unable to pick
correct ChromeOS boot splash logo based on the product segmentation.
Relation between product segment and boot splash screen:
1. Chromebook-Plus Hard-branded device: Renders "cb_plus_logo.bmp" logo
2. Chromebook-Plus Soft-branded device: Renders "cb_plus_logo.bmp" logo
3. Regular Chromebook device: Renders "cb_logo.bmp"
BUG=b:324107408
TEST=Verified logo selection based on compliance and product
requirements.
Change-Id: I9bb1e868764738333977bd8c990bea4253c9d37b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I60ac259d2aa0bd500063a5c841ba33e576e022f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80702
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add FSP header files for Twin Lake. Currently these are just a copy of
ADL-N headers.
BUG=none
BRANCH=firmware-nissa-15217.B
TEST=Build and boot Google/Yaviks with Twin Lake kconfig enabled
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I37579335c784866ebbf978e28936abf046a85b48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Macros MAX_ACPI_MEMORY_AFFINITY_COUNT and MAX_SRAT_MEM_ENTRIES_PER_IMC
are ACPI table specific, and could be used across Xeon-SP SoCs.
This patch moves their definition from FSP header to Xeon-SP layer
ACPI header.
TEST=intel/archercity CRB
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Change-Id: I6c3a84b04a452bc8d4217947a7d12f050c94b56b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80629
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the definition of SRAT memory flags (SRAT_ACPI_MEMORY_ENABLED
and SRAT_ACPI_MEMORY_NONVOLATILE) from FSP header to ACPI common
codes.
TEST=intel/archercity CRB
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Change-Id: I6aa5c20c9556fd5d680406518d19a83801b0852c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
These strings didn't match the license names exactly, so update them
to match.
Change-Id: Ib946eb15ca5fa64cbd6b657350b989b4a4c1b7b7
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
In preparation to using gpp_clk_setup_common for picasso, bring enum
defined in picasso more in line with other AMD SoC.
Change-Id: I9753acdff15921c84516ec873c925f36afdd2aa3
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80412
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Add a stub implementation of the openSIL interface between coreboot and
vendorcode. This can be used to add most of the coreboot-side support
for a SoC using openSIL without the actual opnSIL code already being
publicly available. Once the corresponding openSIL code is available,
the SoC can then switch over to using the actual openSIL implementation.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9284b0cbacba6eae7e2e7e69bc687f015076c2b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80292
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Provide 3 separate functions for each openSIL time point instead of one,
so that we don't need the xSIM-api header file to be included in
opensil.h to decouple the coreboot code more form the openSIL code. This
will allow to create an openSIL stub implementation to already get most
of the coreboot-side SoC code in place before the openSIL source code is
done and released.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I969bc0862560b7254c48f04e9a03387417f328bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Since reporting the PCI ECAM MMCONF MMIO region and the IO ports for the
legacy PCI config space access is needed on all AMD SoCs, implement a
common add_pci_cfg_resources function that reports both and gets called
from amd_pci_domain_read_resources and don't report those in the SoC-
specific code any more. The only functional change is that on Genoa now
the IO ports used for the legacy PCI config space access get reserved.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibbcc2aea4f25b6dc68fdf7f360e5a4ce53f6d850
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
To make add_opensil_memmap match the other function that are directly or
indirectly called by amd_pci_domain_read_resources, pass the resource
index as a pointer instead of passing it by value and then returning the
new resource index.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6a17e488a01cc52b2dab5dd3e3d58bdf3acb554d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use an unsigned long as resource index type instead of an int to match
the data type used for the index in the resource struct and the
functions to report the resources.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iccc2e0556ce8688d933506e0db5cc4b83c66ac76
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80265
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This renames bus to upstream and link_list to downstream.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I80a81b6b8606e450ff180add9439481ec28c2420
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Macros can be confusing on their own; hiding commas make things worse.
This can sometimes be downright misleading. A "good" example would be
the code in soc/intel/xeon_sp/spr/chip.c:
CHIP_NAME("Intel SapphireRapids-SP").enable_dev = chip_enable_dev,
This appears as CHIP_NAME() being some struct when in fact these are
defining 2 separate members of the same struct.
It was decided to remove this macro altogether, as it does not do
anything special and incurs a maintenance burden.
Change-Id: Iaed6dfb144bddcf5c43634b0c955c19afce388f0
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80239
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Move the verstage on PSP files in vendorcode from the fsp subdirectory
to a new psp_verstage subdirectory, since those files aren't specific to
the case of the FSP being used for the silicon initialization.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic47f8b18bc515600add7838f4c7afcb4fff7c004
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80209
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
When the device right below the MPIO chip driver has downstream devices
without another chip in between, those downstream devices will also have
their chip_ops entry set to vendorcode_amd_opensil_genoa_poc_mpio_ops.
To avoid adding the same MPIO descriptor again for those additional
downstream devices, make sure that the chip_info pointer of the device
isn't the same as the one of the parent device, since that's only the
case for those additional downstream devices.
TEST=Onyx still boots to the payload and the MPIO configuration reported
from the openSIL code is still the same
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Nico Huber <nico.h@gmx.de>
Change-Id: I6ba90fdc83ba089127e6722778bfef29dd480bb4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80149
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Call setup_opensil, opensil_entry, and fch_init in the right order from
the init method of the SoC's chip operations. This brings this SoC both
more in line with the other SoCs and avoids using boot state hooks for
this which also makes the sequence in which those functions are called
easier to understand. Previously the boot states were used so that
setup_opensil was run before configure_mpio which was run before
opensil_entry(SIL_TP1), but since configure_mpio is called from
setup_opensil, this is no longer necessary.
TEST=Onyx still boots to the payload and the MPIO configuration reported
from the openSIL code is still the same. The FCH init code now runs
before the resource allocation like on the AMD SoCs that rely on FSP.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic752635da5eaa9e333cfb927836f0d260d2ac049
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79985
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Instead of calling configure_mpio from the init function of the MPIO
chip struct for the first device that has this struct as chip_ops, call
if from setup_opensil. This will allow to do the calls into openSIL from
the SoC's chip_ops init function instead of having to rely on boot state
hooks. configure_mpio needs to be called after the xSimAssignMemoryTp1
call which sets up the openSIL data structures, but before the
opensil_entry(SIL_TP1) call for which the MPIO data structures need to
be filled for it to be able to initialize the hardware accordingly.
Since the vendorcode_amd_opensil_genoa_poc_mpio_ops struct now no longer
assigns configure_mpio to the init function pointer, we have to check
if the device's chip_ops pointer points to
vendorcode_amd_opensil_genoa_poc_mpio_ops instead of checking if the
chip_ops' init function is configure_mpio to match for the devices below
the MPIO chips in the devicetree.
TEST=Onyx still boots to the payload and the MPIO configuration reported
from the openSIL code is still the same
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If37077c879e266763fd2748a1a8d71c63c94729b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Since we pass va_list list to the print function, we need to use vprintk
instead of printk. Earlier versions of this code used vsnprintf and a
local buffer, but when that code was reworked to not need the temporary
buffer, it was replaced by printk instead of the correct vprintk.
TEST=Now the console output from openSIL looks as expected:
Example line from openSIL's console output when it prints the MPIO
configuration from a log some commits before this patch:
Host PCI Address - -1352681400:-1353251983:7
Same line with this patch applied looks how it's supposed to:
Host PCI Address - 0:0:0
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Varshit Pandya <pandyavarshit@gmail.com>
Change-Id: Ia931cc80dea5b7eabb75cfb19f8baa9a09cd2dbf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80203
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As a preparation for the following patch, rename mpio_config to
configure_mpio to make it both a bit more descriptive and to match the
naming scheme used for the functions that get called by setup_opensil.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic4b1aa6e964cbbb4affb89cacd33af8b24871bb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I80559b7c86a8fd2583cb0335279f676e0aa0209e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80067
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
|
|
The `d` flag used in .section is unknown in LLVM/clang 17 and fails
the build. It is also not documented in the ARM compiler manual.
The GNU assembler supports the `d` flag but it also seems to compile
without.
ARM compiler manual: https://developer.arm.com/documentation/101754/0621/armclang-Reference/armclang-Integrated-Assembler/Section-directives
GNU compiler manual: https://sourceware.org/binutils/docs/as/Section.html
`coreboot.rom` does not change between compiling a google skyrim board
with or without this patch. However the debug info for the following
three files in the build directory changes with this patch:
* build/verstage/vendorcode/amd/fsp/mendocino/bl_uapp/bl_uapp_end.o
* build/cbfs/fallback/verstage.elf
* build/cbfs/fallback/verstage.debug
Change-Id: Ie3735b72349b0cfdd27364a39bcdda390af7bfa5
Signed-off-by: Lennart Eichhorn <lennarteichhorn@googlemail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79366
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit adds support for showing different logos on the ChromeOS
firmware splash screen based on the device model (between
Chromebook-Plus and regular ChromeOS devices like Chromebook and
Chromebox). This allows OEMs to customize the branding on their
devices.
This patch also introduces three new Kconfigs:
- CHROMEOS_FW_SPLASH_SCREEN
- CHROMEOS_LOGO_PATH
- CHROMEBOOK_PLUS_LOGO_PATH
which allow users to enable the fw splash screen feature in the
vendorcode. Previously, we were using the BMP_LOGO Kconfig in
drivers/intel/fsp2_0, but we didn't want the top level Kconfigs to be
located inside the architecture specific files.
BUG=b:317880956
BRANCH=None
TEST=emerge-rex coreboot chromeos-bootimage
verify that FW splash screen appears
Change-Id: I56613d1e7e81e25b31ad034edae0f716c94c4960
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79775
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Update header files for FSP for Meteor Lake platform to version 3471_85,
previous version being 3424_88.
FSPM:
1. Add 'DisplayGpioPinMux' UPDs
2. Address offset changes
BUG=b:318772151
TEST=Able to build and boot google/rex to ChromeOS.
Change-Id: I11c39fc2e3099d93a488e71d571ac1af02345fbd
Signed-off-by: Kulkarni, Srinivas <srinivas.kulkarni@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79829
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch ensures `chromeos_get_factory_config()` returns an
unsigned integer value because factory config represents
bit-fields to determine the Chromebook Plus branding.
Additionally, introduced safety measures to catch future
"factory_config" bit-field exhaustion.
BUG=b:317880956
TEST=Able to verify that google/screebo is branded as
Chromebook Plus.
Change-Id: I3021b8646de4750b4c8e2a2981f42500894fa2d0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79769
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch implements an API which relies on the
chromeos_get_factory_config() function to retrieve the factory
config value.
This information is useful to determine whether a ChromeOS device
is branded as a Chromebook Plus based on specific bit flags:
- Bit 4 (0x10): Indicates whether the device chassis has the
"chromebook-plus" branding.
- Bits 3-0 (0x1): Must be 0x1 to signify compliance with
Chromebook Plus hardware specifications.
BUG=b:317880956
TEST=Able to verify that google/screebo is branded as
Chromebook Plus.
Change-Id: Iebaed1c60e34af4cc36316f1f87a89df778b0857
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This code leverages the TPM vendor-specific function
tlcl_cr50_get_factory_config() to fetch the device's factory
configuration.
BUG=b:317880956
TEST=Able to retrieve the factory config from google/screebo.
Change-Id: I34f47c9a94972534cda656ef624ef12ed5ddeb06
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Acoustic noise in PCBs is a common problem and be caused by a variety
of factors, including:
Mechanical vibrations, Electromagnetic interference (EMI) and/or Thermal
expansion.
This patch adds the UPDs to FSPM header file for mitigating the acoustic
noise.
FSPM:
1. AcousticNoiseMitigation
2. FastPkgCRampDisable
3. SlowSlewRate
BUG=b:312405633
TEST=Able to build and boot google/rex.
Change-Id: Iea0bfa2f92bb82e722ffc1a0b2f1e374b32e4ebc
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79301
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
|
|
This updates all warnings currently being printed under the files_added
and build_complete targets to the show_notices target.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia14d790dd377f2892f047059b6d24e5b5c5ea823
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79423
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update header files for FSP for Raptor Lake platform to version 4435_00,
previous version being 4301_01.
FSPM:
1. Options changed for Ppr Enable
2. Add 'Ppr Run Once' and 'Post Package Repair' UPD's
FSPS:
1. Add 'CpuPcieRpTestForceLtrOverride' UPD
MemInfoHob:
1. Structure updated
BUG=b:315234533
Kit: https://www.intel.com/content/www/us/en/secure/design/confidential/
software-kits/kit-details.html?kitId=793230
Cq-Depend: chrome-internal:6786881, chrome-internal:6787635
Cq-Depend: chrome-internal:6719974, chromium:5125983
Change-Id: I65b8a4b6c72f7ae3fff1ee6d073311d154cd6b69
Signed-off-by: Kulkarni, Srinivas <srinivas.kulkarni@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The openSIL code for the Genoa SoC is only a proof of concept, so change
the name of the Kconfig option to include this code in the build from
SOC_AMD_OPENSIL_GENOA to SOC_AMD_OPENSIL_GENOA_POC to clarify that this
is code that isn't intended or ready to be productized.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If91cdaa7c324426964bba2de2109b6c38482fab8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79574
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Even though this SoC is called 'Genoa', the openSIL implementation and
the corresponding coreboot integration is only a proof of concept that
isn't fully featured, has known limitations and bugs, and is not meant
for or ready to being productized. Adding the proof of concept suffix to
the name should point this out clearly enough so that no potential
customer could infer that this might be a fully functional and supported
implementation which it is not.
Change-Id: Ia459b1e007dcfd8e8710c12e252b2f9a4ae19b72
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77894
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I176182180f508a180726fca60064b16fad80e9d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Add the opensil_fill_fadt_io_ports function to fill in the ACPI I/O
ports in FADT that openSIL configured.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I154a162cc8e048cadab693c0755e96c71a62983c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76529
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the existing FSP 4301.01 headers for Raptor Lake out of
subdirectory called 43101.01 to follow standard process.
Change-Id: I710f373acd37e9e0f8b50084a1a7e9fbda816e8c
Signed-off-by: Kulkarni, Srinivas <srinivas.kulkarni@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
To quote its repo[0]: Wuffs is a memory-safe programming language (and
a standard library written in that language) for Wrangling Untrusted
File Formats Safely. Wrangling includes parsing, decoding and encoding.
It compiles its library, written in its own language, to a C/C++ source
file that can then be used independently without needing support for
the language. That library is now imported to src/vendorcode/wuffs/.
This change modifies our linters to ignore that directory because
it's supposed to contain the wuffs compiler's result verbatim.
Nigel Tao provided an initial wrapper around wuffs' jpeg decoder
that implements our JPEG API. I further changed it a bit regarding
data placement, dropped stuff from our API that wasn't ever used,
or isn't used anymore, and generally made it fit coreboot a bit
better. Features are Nigel's, bugs are mine.
This commit also adapts our jpeg fuzz test to work with the modified
API. After limiting it to deal only with approximately screen sized
inputs, it fuzzed for 25 hours CPU time without a single hang or
crash. This is a notable improvement over running the test with our
old decoder which crashes within a minute.
Finally, I tried the new parser with a pretty-much-random JPEG file
I got from the internet, and it just showed it (once the resolution
matched), which is also a notable improvement over the old decoder
which is very particular about the subset of JPEG it supports.
In terms of code size, a QEmu build's ramstage increases
from 128060 bytes decompressed (64121 bytes after LZMA)
to 172304 bytes decompressed (82734 bytes after LZMA).
[0] https://github.com/google/wuffs
Change-Id: If8fa7da69da1ad412f27c2c5e882393c7739bc82
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Based-on-work-by: Nigel Tao <nigeltao@golang.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78271
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the xPRF call to report holes in memory to report those regions as
reserved.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: If89b08a31a9b9f8e7d2959d1bc45e91763fe565b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78922
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the openSIL MPIO chip driver that allows specifying the MPIO lane
configuration in the mainboard's devicetree instead of having this
configuration in a separate port descriptor C file.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I1d408a7eff22423612bc5eb9bfebaf0d86642829
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76520
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For now, we'll use a hard-coded SATA controller configuration that
should work in most cases instead of making everything configurable via
devicetree settings.
In the process of scrubbing opensil for public release SATA became non
functional.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ib37a081c0be4fdd2785e1dca70f376b967ce4462
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76518
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Drive board specific USB configuration from the coreboot devicetree into
the opensil input block.
In the process of scrubbing opensil for public release USB became non
functional.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic41f57f3208aebb3a8b42f70cf558de50fa4de24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78919
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update header files for FSP for Meteor Lake platform to
version 3424_88, previous version being 3323_86.
FSPM:
1. Add `MarginLimitCheck` UPD
2. Add pre-memory graphics UPDs i.e `LidStatus`,
`VgaInitControl`,`VbtPtr`,`VbtSize`,`VgaMessage`
3. Address offset changes
FSPS:
1. Add `Usb4CmMode` UPD
2. Address offset changes
BUG=b:310108425
TEST=Able to build and boot google/rex to ChromeOS.
Change-Id: I3f71cd739a607318fda06fa50d4a379d64857458
Signed-off-by: Kilari Raasi <kilari.raasi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78997
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Tell the resource manager in openSIL to distribute the available IO and
MMIO ranges across the different PCI root bridges.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0985712bc4e87b4068dea22bde1dfa371a6c47bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
- First a console is set up for opensil.
- After that a region in CBMEM is reserved and passed to opensil which
will use it as a buffer for input/output information.
- Finally opensil is called and the return value handled.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I4833a5a86034a13e6be102a6b68c3bb54108bc9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use an xPRF call to get the top of lower DRAM.
Organize Makefile to keep romstage/ramstage components separate.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I269663414f4d8e39eb218cd6348bfce7989a79f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76513
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
OpenSIL has an API to call back into the host firmware to print to the
console.
These could be moved to a common directory when there are more openSIL
implementations to see if it is actually common.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I208eea37ffde64a2311cb9f51e2bcd1ac3dbad4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
