Age | Commit message (Collapse) | Author |
|
The memory between _car_region_start .. _car_region_end has to
be set up as WB in MTRRs for all the cores executing through
bootblock, verstage and romstage. Otherwise global variables may
fail on AP CPUs.
Fixes combination of CBMEM_CONSOLE=y with SQUELCH_EARLY_SMP=n,
which previously did not boot at all for some cases.
Change-Id: I4abcec90c03046e32dafcf97d2f7228ca93c5549
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/26115
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Under some scenarios the key ladder on the Cr50 can get disabled. If
this state is detected, trigger a reboot of the Cr50 to restore full
TPM functionality.
BUG=b:121463033
BRANCH=none
TEST=Built coreboot on sarien and grunt platforms.
TEST=Ran 'gsctool -a -m disable' and reboot. Verified coreboot sends
VENDOR_CC_IMMEDIATE_RESET command to Cr50 and that the Cr50 resets and
then the platform boots normally.
TEST=Performed Cr50 rollback to 0.0.22 which does not support the
VENDOR_CC_TPM_MODE command, confirmed that platform boots normally and
the coreboot log captures the unsupported command.
Tested-by: Keith Short <keithshort@chromium.org>
Change-Id: I70e012efaf1079d43890e909bc6b5015bef6835a
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This board is EOL and has FSP2.0 support, so drop the older
version.
Change-Id: If5297e87c7a7422e1a129a2d8687fc86a5015a77
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Have the generated Chrome OS ACPI GPIO table provide the ACPI GPIO
pin number instead of the raw GPIO number when possible.
This is necessary if the OS uses a different numbering for GPIOs
that are reported in ACPI than the actual underlying GPIO number.
For example, if the SOC OS driver declares more pins in an ACPI GPIO
bank than there are actual pins in the hardware it will have gaps in
the number space.
This is a reworked version of 6217e9beff16d805ca833e79a2931bcdb3d02a44
which does not try to convert CROS_GPIO_VIRTUAL.
BUG=b:120686247
TEST=pass firmware_WriteProtect test on Sarien
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I3ad5099b7f2f871c7e516988f60a54eb2a75bef7
Reviewed-on: https://review.coreboot.org/c/31080
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
FSP 2.0.9 provides UPD interface to adjust integrated filter
value, usb3 LDO and pmic vdd2 voltage. Change coreboot upd
structure to sync with fsp 2.0.9 release.
BUG=b:123398358
CQ-DEPEND=CL:*817128
TEST=Verified yorp boots to kernel.
Change-Id: I3d17dfbe58bdc5222378459723da8e9ac0573510
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/31131
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In order to allow the mainboard to configure the system before a
cr50 initiated update reset add a weak function that the mainboard
can override if necessary.
This will allow a board that would otherwise be configured to
stay off after an EC reset to instead power up after the reset and
not end up in a shut down state after a cr50 update.
BUG=b:121380403
TEST=update cr50 firmware on sarien and reboot
Change-Id: I11f9e8c9bfe810f69b4eaa2c633252c25004cbd0
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31057
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
find src -type f "!" -regex ".*\.\(vbt\|bin\)" -exec sed -i -e "s,\s\+$,,g" {} \;
Change-Id: Ic70cf8524dcd0a0f5700f91b704b3c545dd8a01a
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30959
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Default to FSP binary and headers shiped in 3rdparty/fsp.
* Drop headers and code from vendorcode/intel/fsp1_0/broadwell_de
* Select HAVE_FSP_BIN to build test the platform
* Fetch FSP repo as submodule
* Make FSP_HEADER_PATH known from FSP2.0 useable on FSP1.0
* Introduce FSP_SRC_PATH for FSP source file
* Add sane defaults for FSP_FILE
Tested on wedge100s.
Change-Id: I46f201218d19cf34c43a04f57458f474d8c3340d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/30742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
|
|
It was only hooked up for galileo board when using the obsolete
FSP1.1. I don't see how it can be useful...
Change-Id: Ifd7cbd664cfa3b729a11c885134fd9b5de62a96c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30691
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Only a few boards are using IMC for the onboard fan control,
so regarding the availability of IMC selection it should be opt-in,
not opt-out. Also, select HUDSON_IMC_ENABLE for Gizmo 2
because Gizmo 2 could use IMC for the onboard fan control.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I3590b13c3b155405d61e373daf1bd82ca8e3bd16
Reviewed-on: https://review.coreboot.org/c/30756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Some boards may want to initialize watchdog in verstage instead of
bootblock or ramstage, so we need to add watchdog support in verstage.
BRANCH=none
BUG=b:120588396
TEST=build successfully
Change-Id: I13ab84f54d576a0e8c723070b5d9aadd9d63f87c
Signed-off-by: You-Cheng Syu <youcheng@google.com>
Reviewed-on: https://review.coreboot.org/c/30329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Change-Id: I179264ee6681a7ba4488b9f1c6bce1a19b4e1772
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/c/30160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This reverts commit 6217e9beff16d805ca833e79a2931bcdb3d02a44.
Reason for revert: boards with CROS_GPIO_VIRTUAL selected in
absence of dedicated recovery GPIO pin is die-ing now at
gpio.c file line. 127
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: Ief20681b2a7ed4d15fd2d637ae034d54a96b2d6f
Reviewed-on: https://review.coreboot.org/c/30278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Using a fixed filename only allows for one SAR configuration to be
checked into CBFS. However, we have devices with shared firmware that
would desire separate SAR configurations. This change allows boards to
define a function to select one of multiple files stored in CBFS to be
used.
BUG=b:120958726
BRANCH=octopus
TEST=build
Signed-off-by: Justin TerAvest <teravest@chromium.org>
Change-Id: Ib852aaaff39f1e9149fa43bf8dc25b2400737ea5
Reviewed-on: https://review.coreboot.org/c/30222
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
If the generic GPIO library is enabled the code that generates the
GPIO table in ACPI should attempt to get the GPIO pin value from
the gpio_acpi_pin() function.
BUG=b:120686247
TEST=Tested on Sarien board to ensure that GPIO pin exported by
Chrome OS for the Write Protect signal is correct.
Change-Id: I267694b576009f79bacac6eda5f32bbf51742d78
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/30132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This is an issue found by the new builder image and needs to be fixed
before we can upgrade to the new toolchain version:
In function `bdk_dram_get_size_mbytes':
src/vendorcode/cavium/bdk/libbdk-dram/bdk-dram-size.c:198:
undefined reference to `bdk_pop'
In function `bdk_get_num_cores':
/src/vendorcode/cavium/include/bdk/libbdk-hal/bdk-utils.h:164:
undefined reference to `bdk_dpop'
In function `init_octeon3_ddr3_interface':
src/vendorcode/cavium/bdk/libdram/dram-init-ddr3.c:7550:
undefined reference to `bdk_pop'
Change-Id: Ibf71e4556014795bfedceccfe3837dc9deb29ad2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/29851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Initially, I wanted to move only the Kconfig DISPLAY_MTRRS into the
"Debug" menu. It turned out, though, that the code looks rather generic.
No need to hide it in soc/intel/.
To not bloat src/Kconfig up any further, start a new `Kconfig.debug`
hierarchy just for debug options.
If somebody wants to review the code if it's 100% generic, we could
even get rid of HAVE_DISPLAY_MTRRS.
Change-Id: Ibd0a64121bd6e4ab5d7fd835f3ac25d3f5011f24
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/29684
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
* Remove FSP Sandy/Ivybrige which are unused.
* Open Source implementation isn't final but
good enough to replace FSP version.
* For new ports use NORTHBRIDGE_INTEL_IVYBRIDGE
and NORTHBRIDGE_INTEL_SANDYBRIDGE
Change-Id: I7b6bc4bfdd0481c8fe5b2b3d8f8b2eb9aa3c3b9e
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-on: https://review.coreboot.org/29402
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make the firmware slot configuration in VBOOT selectable. The following
three modes are available:
-RO only
-RO + RW_A
-RO + RW_A + RW_B
The mode "RO only" is the lowest mode with no safety during update.
You can select either RW_A or RW_AB via Kconfig which will add the
selected parttions to the final image.
Change-Id: I278fc060522b13048b00090b8e5261c14496f56e
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/27714
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
FSP 2.0.7.1 provides UPD interface to execute IPC command. Configure
PmicPmcIpcCtrl for PMC to program PMIC PCH_PWROK delay from default
100ms to 10ms to improve cold boot and S3 resume performance.
BUG=b:118676361
CQ-DEPEND=CL:*703187
TEST=Verified system_resume_firmware_ec time reduction.
Change-Id: I05656c9083a855112120b7f1b0ec01c42f582409
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/29363
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
If the file `southbridge/intel/lynxpoint/nvs.h` is included in a file
that does not already include <stdint.h>, compilation errors result.
Adding the necessary <stdint.h> inclusions fixes compilation for an
ASRock H81M-HDS.
Change-Id: Id0d14705282cc959146e00dd47754ee8a2e8e825
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
icelake FSP is still under development and hence the FSP header files
and binaries are not available on github. Meanwhile add basic header
files required to compile the SoC and mainboard with FSP2.0.
BUG=None
BRANCH=None
TEST=Build for icelake_rvp board successfull.
Change-Id: I9ab8f180b572ec553e7531f7483d091f6897c462
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/29163
Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Current header file included a proprietary license, fix that by using
same license shared on public fsp release on fsp.
BUG=https://ticket.coreboot.org/issues/177
TEST=N/A
Change-Id: I129c8a465e702d3885d994f4fab352b34d46f177
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/29224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ian Kelling <ian@iankelling.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I81985bd2836bdeb369587f170504a8a048ee496b
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/29196
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
board_reset() replaces the existing common reset API. There is no common
distinction between reset types across platforms, hence, common code
could never decide which one to call.
Currently only hard_reset() is used by common code. We replace these
calls and provide a fall-back to the current hard_reset() implemen-
tation. The fall-back will be removed along with hard_reset() after the
transition of all boards.
Change-Id: I274a8cee9cb38226b5a0bdff6a847c74ef0b3128
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
More platforms are not able to hibernate under certain circumstances,
such as when AC is plugged. This original path was conservatively put in
to prevent potential damage when cr50-update-caused asynchronous resets
occur. Julius' compelling argument that async resets from recovery mode
requests should have enough coverage of the design over the course of
project development. Remove the hibernate path and assume all is well
going forward.
Change-Id: I37121e75ff4e6abcb41d8534a1eccf0788ce2ea2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/29076
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With https://github.com/IntelFsp/FSP/pull/4 merged, this allows using
Intel's FSP repo (that we mirror) to build a complete BIOS ifd region
with a simple coreboot build, automatically drawing in headers and
binaries.
This commit covers Apollolake, Coffeelake, Skylake, and Kabylake.
Skylake is using Kabylake's FSP since its own is FSP 1.1 and Kabylake's
also supports Skylake.
Another candidate (given 3rdparty/fsp's content) is Denverton NS, but
it requires changes to coreboot's FSP bindings to become compatible.
Cannonlake, Whiskeylake require an FSP release.
Change-Id: I8d838ca6555348ce877f54e95907e9fdf6b9f2e7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/28593
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Its spreading copies got out of sync. And as it is not a standard header
but used in commonlib code, it belongs into commonlib. While we are at
it, always include it via GCC's `-include` switch.
Some Windows and BSD quirk handling went into the util copies. We always
guard from redefinitions now to prevent further issues.
Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/28927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Now that the last dependency was resolved, remove AmdLib folder.
BUG=b:112525011
TEST=Build and boot grunt.
Change-Id: Ibd9a20bc358742520138b9b01f76d7fd2fac92ab
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28742
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Charles Marslett <charles.marslett@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that PspBaseLib is no longer used, fully remove the folder.
BUG=b:116579642
TEST=Build grunt
Change-Id: I441b3f46e2312c12771766f87b25d1dc15ff3af0
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Eliminate the references to PspBaseLib.c and PspBaseLib.h in
agesa_headers.h. Fix psp.c references to definitions in those files
by adding them to include/amdblocks/psp.h.
BUG=b:78514564
TEST=Build and boot grunt/ChromeOS and restore an image from the internet.
Change-Id: I2740ceb945736c6e413f7d0bd0c41a19e19c7d5a
Signed-off-by: Charles Marslett <charles.marslett@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/27619
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It is much more convenient to view these files if there are 8 values per line,
not 1 value which results in a very long file. The contents remain the same:
these microcodes are still the latest publicly available at the time of writing.
Change-Id: I3e5296a5b5e895702a60aca1ded7418bb345263d
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-on: https://review.coreboot.org/28391
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This microcode update for CPU ID 0x300F10 should improve the system stability.
It is a part of microcode_amd.bin officially released by AMD at linux-firmware:
it starts at 0x217C offset, and size is 0x03C0 as specified priorly at 0x2178.
Old version: 0x300000F [2010-04-10]
replaced by
New version: 0x3000027 [2011-09-13]
Change-Id: I9650fab377d957904318ebb393323c2509cfea26
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-on: https://review.coreboot.org/28378
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
VPD reference: https://chromium.googlesource.com/chromiumos/platform/vpd/+/master/README.md
Copy ChromeOS VPD driver to add support for VPD without CROMEOS.
Possible use case:
* Storing calibration data
* Storing MAC address
* Storing serial
* Storing boot options
+ Now it's possible to define the VPD space by choosing
one of the following enums: VPD_ANY, VPD_RW, VPD_RO.
+ CHROMEOS selects now VPD as part of it.
+ VPD is implemented as driver.
Change-Id: Id9263bd39bf25d024e93daa57053fefcb1adc53a
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25046
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Standardize on using vboot_handoff data structure for transferring
data between coreboot and depthcharge. chromeos_acpi_t.vdat is
undefined until set in depthcharge.
BUG=b:112288216
TEST=compile and run on eve
CQ-DEPEND=CL:1198814
Change-Id: Iccc021334d3c6f0145dffd5ca05beb9e430378a9
Signed-off-by: Joel Kitching <kitching@gmail.com>
Reviewed-on: https://review.coreboot.org/28407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
- Remove unused acpi_get_chromeos_acpi_info (see CB:28190)
- Make function naming in gnvs.h consistent (start with "chromeos_")
BUG=b:112288216
TEST=compile and run on eve
Change-Id: I5b0066bc311b0ea995fa30bca1cd9235dc9b7d1b
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/28406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Some ACPI interfaces introduced by Chrome or coreboot do not
need drivers outside ChromeOS, for example Chrome EC or
coreboot table; or will be probed by direct ACPI calls (instead
of trying to find drivers by device IDs).
These interfaces should be set to hidden so non-ChromeOS systems,
for example Windows, won't have problem finding driver.
Interfaces changed:
- coreboot (BOOT0000), only used by Chrome OS / Linux kernel.
- Chrome OS EC
- Chrome OS EC PD
- Chrome OS TBMC
- Chrome OS RAMoops
BUG=b:72200466
BRANCH=eve
TEST=Boot into non-ChromeOS systems (for example Windows)
and checked ACPI devices on UI.
Change-Id: I9786cf9ee07b2c3f11509850604f2bfb3f3e710a
Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/1078211
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Hung-Te Lin <hungte@chromium.org>
Tested-by: Hung-Te Lin <hungte@chromium.org>
Trybot-Ready: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/28333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Coffeelake FSP headers had been updated to version 7.0.3D.60. Original
file location from https://github.com/IntelFsp/FSP/tree/master/
CoffeeLakeFspBinPkg/Include .
BUG=N/A
TEST=Build and flash, able to boot up into OS on whiskeylake rvp
platform.
Change-Id: I656da83e9042642576b785643e423ba47da8dd73
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/28286
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Only Ids.h had definitions still in use, and they were removed or moved to
AGESA.h. Now Ids.h, IdsPerf.h and IdsLib.h can be safely removed.
BUG=b:112885948
TEST=Build grunt
Change-Id: I031ae8eb5f34fee801365fc89ea11a881211e726
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28299
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Google is creating code to measure AGESA performance, which needs structure
TP_Perf_STRUCT and associated definitions. In preparation to remove IDS
headers, move the necessary definitions to AGESA.h.
BUG=b:112885948
TEST=Build grunt
Change-Id: I941a67a8889a9dbf35c9fd511c7f670623204134
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Currently, IDS_CALLOUT macros are only used in stoneyridge callout. In
preparation to remove IDS headers, move the definitions to AGESA.h.
BUG=b:112885948
TEST=Build grunt
Change-Id: Ia9717eb68fed2e568eaf169157c2837bb8232b7e
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The macro IDS_ERROR_TRAP is only defined, and never used. Also,
IDSOPT_ERROR_TRAP_ENABLED is defined FALSE, so the macro would translate
to nothing. Remove the macro and IDSOPT_ERROR_TRAP_ENABLED.
BUG=b:112885948
TEST=Build grunt
Change-Id: I2c3ca4b0a4a1f96f245ba2f4902fd0051dda77ef
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Function IdsErrorStop() is only used within AmdLib.c function
LibAmdMsrRead(), which in turn is only used once within PspBaseLib.c and
three times inside AmdLib.c, all with well defined MSR addresses.
IdsErrorStop() is used as a trap if MSR address is 0 or 0xFFFFFFFF, which
clearly it's not. Therefore it can be safely removed from AmdLib.c.
BUG=b:112885948
TEST=Build grunt
Change-Id: I47ffcbd4fbae28b6d711a340f0ac3f3b007e8e4f
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Rename RSDP to RSDP_HEADER to match other AMD vendorcode and
to not pollute the namespace. We will use RSDP in a future patch.
Change-Id: I3b66135ae1732b86b5ebfcdc01a850a0d9d3eb50
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/28294
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Since we can derive chromeos_acpi's location from that of
ACPI GNVS, remove chromeos_acpi entry from cbtable and
instead use acpi_gnvs + GVNS_CHROMEOS_ACPI_OFFSET.
BUG=b:112288216
TEST=None
CQ-DEPEND=CL:1179725
Change-Id: I74d8a9965a0ed7874ff03884e7a921fd725eace9
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/28190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The only code still used are LibAmdPciRead() and LibAmdPciWrite(). These
functions are used by PspBaseLib. Remove all functions that are not used,
directly or indirectly, by LibAmdPciRead() and LibAmdPciWrite().
BUG=b:112688270
TEST=Build grunt
Change-Id: Iba5cfbeee8e83ca78279a1bc2a333370c04f55ed
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28194
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This small change is required for the successful loading of microcode
from F15TnMicrocodePatch0600110F_Enc.c for the Richland RL-A1 CPUs,
such as A10-5750M found at coreboot-supported Lenovo G505S laptop.
Richland RL-A1 and Trinity TN-A1 CPUs are using the same microcode,
so the Richland RL-A1 IDs should be added to this equivalence table.
Function `GetPatchEquivalentId()` in
`src/vendorcode/amd/agesa/f15tn/Proc/CPU/cpuMicrocodePatch.c`
goes through the equivalence table like below.
for (i = 0; i < (EquivalencyEntries * 2); i += 2) {
// check for equivalence
if (ProcessorRevisionId == MicrocodeEquivalenceTable[i]) {
*ProcessorEquivalentId = MicrocodeEquivalenceTable[i + 1];
return (TRUE);
}
}
Change-Id: I7a68f2fef74fb4c578c47645f727a9ed45526f69
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-on: https://review.coreboot.org/28204
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: <awokd@danwin1210.me>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch allows boards to disable turning off EC on cr50 update.
If CR50 resets the whole system, an EC reset is not required.
BUG=b:112604277
BRANCH=none
TEST=gsctool -a -u /media/removable/cr50.bin && reboot
Verify EC reboots. AP prints 'Waiting for CR50 reset to pick up update'
then reboots.
Change-Id: I60a7aa50a549e7a5a1a114245fbf7b9646d813bb
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/28110
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Header files AcpiLib.h, FchDef.h and FchBiosRamUsage.h became obsolete when
VENDORCODE_FULL_SUPPORT was removed. Therefor they should be removed.
BUG=b:112602580
TEST=Build grunt and gardenia.
Change-Id: If4fdb9ae1e106ba15f2a073f592499e638e40c65
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28093
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove VENDORCODE_FULL_SUPPORT from /soc/amd/stoneyridge/Kconfig and
from vendorcode/amd/pi/00670F00/Makefile.inc, thus completing the removal
of VENDORCODE_FULL_SUPPORT from coreboot.
BUG=b:112578491
TEST=none, VENDORCODE_FULL_SUPPORT already not used.
Change-Id: Idb5f6dc7add1617f7a97a97ae110901b2dec0996
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Remove VENDORCODE_FULL_SUPPORT from file above mentioned file, in
preparation to full removal of VENDORCODE_FULL_SUPPORT functions.
BUG=b:112578491
TEST=none, VENDORCODE_FULL_SUPPORT already not used.
Change-Id: Ic23dcf245b2cee24f7363ca3bb9918eb2f11179c
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Remove VENDORCODE_FULL_SUPPORT from file above mentioned file, in
preparation to full removal of VENDORCODE_FULL_SUPPORT functions.
BUG=b:112578491
TEST=none, VENDORCODE_FULL_SUPPORT already not used.
Change-Id: Id91e76282509743070e34c02082d3f3f46a14059
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Remove VENDORCODE_FULL_SUPPORT from file:
vendorcode/amd/pi/00670F00/Proc/Psp/PspBaseLib/PspBaseLib.c
BUG=b:112578491
TEST=none, VENDORCODE_FULL_SUPPORT already not used.
Change-Id: I0d590b175a3cf0426580dc9ee5164b3cedc838e2
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Remove VENDORCODE_FULL_SUPPORT from files FchLib.c and FchPeLib.c.
BUG=b:112578491
TEST=none, VENDORCODE_FULL_SUPPORT already not used.
Change-Id: If24eb7f005720a62a1280fe78ddb54c9d2690150
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Now that the functions that used them were safely removed, remove
LibAmdIoRMW(), LibAmdMemRMW() and LibAmdPciRMW().
BUG=b:112541697
TEST=Build grunt and gardenia
Change-Id: I570bd91cd9eba7798ea39d9685e214fee10824be
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28083
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The functions that use LibAmdPciRMW() are not used by coreboot and can be
safely removed in preparation to remove LibAmdPciRMW() itself. The
functions to be removed are:
From vendorcode/amd/pi/00670F00/Proc/Fch/Common/FchPeLib.c:
ProgramPciByteTable().
From vendorcode/amd/pi/00670F00/Proc/Fch/Common/FchLib.c: RwXhciIndReg(),
RwXhci0IndReg() and RwXhci1IndReg().
From vendorcode/amd/pi/00670F00/Proc/Fch/Common/PciLib.c: RwPci().
BUG=b:112541697
TEST=Build grunt and gardenia
Change-Id: I0b96d3d6b98140ed8e9298817dbe29d55b9e22cb
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The functions that use LibAmdMemRMW() are not used by coreboot and can be
safely removed in preparation to remove LibAmdMemRMW() itself. The
functions to be removed are: ProgramFchAcpiMmioTbl() and GetEfuseStatus(),
both from vendorcode/amd/pi/00670F00/Proc/Fch/Common/FchPeLib.c.
BUG=b:112541697
TEST=Build grunt and gardenia
Change-Id: Ib935b1797c4bf8b504fdda6f676fca369169a7f1
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
There is a confusingly named section in cbmem called vdat.
This section holds a data structure called chromeos_acpi_t,
which exposes some system information to the Chrome OS
userland utility crossystem.
Within the chromeos_acpi_t structure, there is a member
called vdat. This (currently) holds a VbSharedDataHeader.
Rename the outer vdat to chromeos_acpi to make its purpose
clear, and prevent the bizarreness of being able to access
vdat->vdat.
Additionally, disallow external references to the
chromeos_acpi data structure in gnvs.c.
BUG=b:112288216
TEST=emerge-eve coreboot, run on eve
CQ-DEPEND=CL:1164722
Change-Id: Ia74e58cde21678f24b0bb6c1ca15048677116b2e
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/27888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
From doc 571118, the bit 5 of OdtConfig is nWR config.
If the bit 5 is set, MRC will set MR1 nWR field to 24.
If the bit 5 is clear, MRC will set MR1 nWR field to 6.
Change-Id: Ic8e4e2ffb098c8ba2f670535981e9a30c3d45b64
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/27814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Per AMD, the Integrated Micro Controller is not a supported feature of the
Stoney Ridge APU. Systems are expected to implement an external EC for
desired features. Remove all stoney IMC files and functions from vendor code.
BUG=b:111780177
TEST=Build grunt and gardenia
Change-Id: I06e993fa498cc0978c1d037bc6001682407f7fac
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27652
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update FSP header files to match FSP Reference Code Release v2.0.5
for Geminilake
BUG=b:111683980
CQ-DEPEND=CL:*653835
Change-Id: Ib5ac532843fdb30ac3269fb6ed96dd05ef5736cc
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/27623
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix an undefined reference error with GCC 8.1
/cb-
build/Testing_coreboot.0/CAVIUM_CN8100_SFF_EVB/romstage/vendorcode/cavium/bdk
/libbdk-dram/bdk-dram-size.o: In function `bdk_dram_get_size_mbytes':
/home/coreboot/slave-root/workspace/Testing_coreboot/src/vendorcode/cavium/bdk
/libbdk-dram/bdk-dram-size.c:198: undefined reference to `bdk_pop'
/cb-
build/Testing_coreboot.0/CAVIUM_CN8100_SFF_EVB/romstage/vendorcode/cavium/bdk
/libbdk-dram/bdk-dram-test.o: In function `bdk_get_num_cores':
/home/coreboot/slave-
root/workspace/Testing_coreboot/src/vendorcode/cavium/include/bdk/libbdk-hal
/bdk-utils.h:164: undefined reference to `bdk_dpop'
/cb-
build/Testing_coreboot.0/CAVIUM_CN8100_SFF_EVB/romstage/vendorcode/cavium/bdk/libdram
/dram-init-ddr3.o: In function `init_octeon3_ddr3_interface':
/home/coreboot/slave-
root/workspace/Testing_coreboot/src/vendorcode/cavium/bdk/libdram/dram-init-
ddr3.c:7550: undefined reference to `bdk_pop'
/cb-
build/Testing_coreboot.0/CAVIUM_CN8100_SFF_EVB/romstage/vendorcode/cavium/bdk/libdram
/dram-l2c.o: In function `bdk_get_num_cores':
/home/coreboot/slave-
root/workspace/Testing_coreboot/src/vendorcode/cavium/include/bdk/libbdk-hal
/bdk-utils.h:164: undefined reference to `bdk_dpop'
make[1]: *** [src/arch/arm64/Makefile.inc:119: /cb-
build/Testing_coreboot.0/CAVIUM_CN8100_SFF_EVB/cbfs/fallback/romstage.debug]
Error 1
Change-Id: Ifcde5476c6f347c0eac7ca44bac88d3fa4017fb7
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Prevent a reboot loop due to slow PCIe init.
Poke the watchdog a few times.
Change-Id: I03739d7dbad3072ccf77364fa4caba42c66ac643
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27455
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Swap 100Mhz and 156Mhz reference clock.
Correct values are taken from __bdk_qlm_sff81xx_set_reference().
Tested on Cavium's cn8100_sff_evb.
Change-Id: I312ce7379b361594249f9f26f4e561ebf57347df
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27454
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix Coverity CID1393970
Change-Id: I5db6866b8e51eaea201a4c03e59d7d00f4f826e7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
* Fix CID1393963 (Uninitialized variables)
* Comment in working code
* Remove workaround to limit DDR speed
Change-Id: I96289da43c1018c2fdf9d013ce7f21d7511ba595
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27452
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The BDK config subsystem can't store values in romstage.
Read frequency from DDR memory controller instead from
BDK config.
Fixes memory info showing always 0 MT/s.
Change-Id: Iaee33e57e27ca182f41be923cf950868f66d3638
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27451
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix Coverity CID1393975
Change-Id: I275cabf55fba464be7bd4c21dfe5826ea554ac84
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
* Use Kconfig options instead of unusable getenv
* Select CAVIUM_BDK_DDR_TUNE_HW_OFFSETS on CN81XX
* Fix Coverity CID 1393976 (DEADCODE)
Tested on Cavium's cn8100_sff_evb.
Change-Id: Ia16c0161b0e9cf5d06418e46556c0fb45532a5b1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
To comply with all relevant bodies throughout the world, SAR settings
take into account the lowest common denominator Tx power settings. This
setup may lead to non-optimal performance when the user location is in a
country that may allow higher power setting. The purpose of Wireless Geo
Delta Settings (WGDS) is to provide offset settings for FCC, Europe,
Japan and Rest of the world. These offsets would be added (by Intel wifi
driver) to the base SAR Tx Power as defined in WRDS and EWRD
BUG=b:65155728
BRANCH=none
TEST=WGDS ACPI table gets created as expected.
Change-Id: I4f602e3f95ff3545db6cc6e428beb9a36abd9296
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/21098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Fix a typo.
Only memcpy into target buffer if pointer is not NULL.
Change-Id: I1aa4b2ce1843e53ab6ed2224eaa928fc79ea3b83
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
This adds Cavium CN81xx SoC and SFF EVB files.
Code is based off of Cavium's Octeon-TX SDK:
https://github.com/Cavium-Open-Source-Distributions/OCTEON-TX-SDK
BDK coreboot differences:
bootblock:
- Get rid of BDK header
- Add Kconfig for link address
- Move CAR setup code into assembly
- Move unaligned memory access enable into assembly
- Implement custom bootblock entry function
- Add CLIB and CSIB blobs
romstage:
- Use minimal DRAM init only
devicetree:
- Convert FTD to static C file containing key value pairs
Tested on CN81xx:
- Boots to payload
- Tested with GNU/Linux 4.16.3
- All hardware is usable (after applying additional commits)
Implemented in future commits:
- Vboot integration
- MMU suuport
- L2 Cache handling
- ATF from external repo
- Devicetree patching
- Extended DRAM testing
- UART init
Not working:
- Booting a payload
- Booting upstream ATF
TODO:
- Configuration straps
Change-Id: I47b4412d29203b45aee49bfa026c1d86ef7ce688
Signed-off-by: David Hendricks <dhendricks@fb.com>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/23037
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
* Make it compile.
* Fix whitespace errors.
* Fix printf formats.
* Add missing headers includes
* Guard headers with ifdefs
Compile DRAM init code in romstage.
Compile QLM, PCIe, RNG, PHY, GPIO, MDIO init code in ramstage.
Change-Id: I0a93219a14bfb6ebe41103a825d5032b11e7f2c6
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/25089
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new callout definition for AgesaGetTempHeapBase and displace
AgesaHeapRebase (which was merged too soon) in the ordering. Also
add its structure.
AGESA will be modified to ask coreboot for the location for temporary
storage of heap data at the end of InitPost. The old methodology is
to use 0xb0000 but the change will allow coreboot to determine the
location.
BUG=b:74518368
Change-Id: I0bc894d7842cf4b3eb728a90704277b17f4bf7be
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/26145
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
* Remove 2nd software stack in pc80 drivers directory.
* Create TSPI interface for common usage.
* Refactor TSS / TIS code base.
* Add vendor tss (Cr50) directory.
* Change kconfig options for TPM to TPM1.
* Add user / board configuration with:
* MAINBOARD_HAS_*_TPM # * BUS driver
* MAINBOARD_HAS_TPM1 or MAINBOARD_HAS_TPM2
* Add kconfig TPM user selection (e.g. pluggable TPMs)
* Fix existing headers and function calls.
* Fix vboot for interface usage and antirollback mode.
Change-Id: I7ec277e82a3c20c62a0548a1a2b013e6ce8f5b3f
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/24903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ic7d80b25c0815f3816ae40646d024e0d9fe61f08
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Update FSP header files to match FSP Reference Code Release v2.0.3 for
Gemimilake
CQ-DEPEND=CL:*627827
Change-Id: I17438f18fc3a1ea7ad9bd69a06adb1330d917257
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-on: https://review.coreboot.org/26285
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The TP_Perf_STRUCT was missing from pi/00670F00. So I copied the file
from src/vendorcode/amd/pi/00630F01/Include/IdsPerf.h and removed
everything that we don't need. I did have to change
MAX_PERFORMANCE_UNIT_NUM so it matches the size used by pi/00670F00.
This struct is used to extract the timestamps from AGESA.
BUG=b:64549506
TEST=built on grunt
Change-Id: I06ec82348e3d10f2430c1192a925a49389ae4414
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/26235
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update Cannonlake FSP header to version 7.x.2E.50, the following changes
were made,
Memory Init UPD:
1. Add GDXC configuration options.
2. Remove some internal graphics memory selections.
2. Remove Fixed mid option for SaGv.
3. Add DualDimm per channel board type.
4. Remove PEG IMR options.
Silicon Init UPD:
1. Add CD clock selections of 675MHz.
2. Remove Pcode PreWake/Rampup/RampDn time selections.
3. Remove C3 state demotion/unDemotion selections.
BUG=None
TEST=Build and boot up on meowth platform.
Change-Id: I08ffb14df9f32089dbf44fa5bd3fc58a5bedb90d
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/26148
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Was never used for the boards in our tree.
Change-Id: Ib9e9ab25ccb8d1d556fdeb8bb4c6558f25bb81b6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I8cf2f23d785e934371dfa687483491cd22b9863d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Vendor code is compiled as a library, thus the whole library is included
into the final image. However, not all procedures are required, they are
there because original AGESA code had them. We cannot remove them, in order
to facilitate porting of fixed AGESA code. Therefor add #if throughout the
code to allow the control if unneeded procedures will be build.
BUG=b:78610011
TEST=Build and boot grunt; build kahlee and gardenia.
Change-Id: I68f9e359b2331f715a3b85486c4181866985afdf
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/26135
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Vendor code has several headers included into source code that are not
needed in order to build them. Remove unneeded #include. This is part of
controlling the build of unneeded procedures within vendor code.
BUG=b:78610011
TEST=Build grunt.
Change-Id: Id7d451b6be564632836fc64fd343131edb85183a
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/26134
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
While built, this code was never called.
Change-Id: Ie8216d8f4636330d38ea02aab83bc9e440864f17
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Syncronise HT init code with f12 vendorcode.
Constructor for HT init is not required since init itself
is not called.
Change-Id: I0552c4d019c700f84d98473978afb18fe4eea1e8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26040
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Create libagesa as a thin and deterministic archive file,
this could reduce build time and used space.
Change-Id: Icfd1f3fbf54f7e61ab528fa7686331182959c7d5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/22068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix (assumed) regression with commit
ac63b41 vendorcode/amd/agesa: Fix variable length array declaration
The code used sizeof() on the struct where array length was
previously adjusted, but only f14 case was fixed accordingly.
Change-Id: Ib83660d5e102e13b4ffad19fb78f695ac4a871dc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26036
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Definition of S_PSTATE only allowed PStateStruct[0], while it is
effectively used as a flexible array. Since sizeof(S_PSTATE) is
reduced here by sizeof(S_PSTATE_VALUES), we have to account for
that when calculating PStateLevelingSizeOfBytes.
In S_PSTATE context, PStateStruct[PStateMaxValue] is valid reference.
GCC 7.2.0 warns about an out of bounds array subscript.
```
CC libagesa/vendorcode/amd/agesa/f14/Proc/CPU/Feature/cpuPstateLeveling.o
src/vendorcode/amd/agesa/f14/Proc/CPU/Feature/cpuPstateLeveling.c: In function 'PStateLevelingMain':
src/vendorcode/amd/agesa/f14/Proc/CPU/Feature/cpuPstateLeveling.c:524:65: error: array subscript is above array bounds [-Werror=array-bounds]
PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].PStateEnable = 0;
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
Change-Id: If9598a951c6b882432689b677a956c44650c7083
Found-by: gcc (Debian 7.2.0-2) 7.2.0
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21297
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update FSP header files to match FSP Reference Code Release v2.0.2 for
Gemimilake
CQ-DEPEND=CL:*594651,CL:*598345
Change-Id: I78d064db41a54d97e98d6e44e0832724127e5bfc
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-on: https://review.coreboot.org/25757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Remove Fch.h from being included in
src/vendorcode/amd/pi/00670F00/agesa_headers.h. It is not needed.
BUG=b:69220826
BRANCH=master
TEST=build Gardenia and Grunt systems.
Change-Id: Ifde58421d20c813ae5708b1d9c6ec76433051d33
Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/25808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Remove unused header files in
src/vendorcode/amd/pi/00670F00/agesa_headers.h. This is a first
clean up. Hopefully more headers will be removed in other commits.
Header files cannot be removed at this time. They are used by files in
vendorcode/amd/pi/00670F00/.
BUG=b:77944801
BRANCH=none
TEST=build Gardenia and Grunt
Change-Id: I99b77f6ba41ded30122a01bbe709681312561436
Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/25644
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove unused AGESA header files from
vendorcode/amd/pi/00670F00/binaryPI/AGESA.c
BUG=b:77905293
BRANCH=none
TEST=build Gardenia.
Change-Id: Ic38424d489dcc37a4074159e33fca0d49c71f701
Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/25626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The term MTRR has been misspelled in a few places.
Change-Id: I3e3c11f80de331fa45ae89779f2b8a74a0097c74
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Header files based on FSP 7.0.25.34
BUG=none
BRANCH=none
TEST=built coreboot without build error.
Change-Id: Id92d99915bda89dd475f393a48adee60bbaee80f
Signed-off-by: Ng Kin Wai <kin.wai.ng@intel.com>
Reviewed-on: https://review.coreboot.org/25335
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
|
|
This imports common BDK sources that will be used in subsequent
patches.
The BDK is licensed under BSD and will be reduced in size and optimized to
compile under coreboot.
Change-Id: Icb32ee670d9fa9e5c10f9abb298cebf616fa67ad
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/25524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
AgesaHeapRebase is an optional callout that allows AGESA to use a
coreboot-managed heap base address. Its internal default location
is determined by AMD_HEAP_START_ADDRESS which is defined as 4 MB.
Add a #define that AGESA may use once the feature is available.
BUG=b:74518368
Change-Id: Id23455779b1c8c4931ad1a3122587e09ad237ecc
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/25456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Fsp revison 7.x.2A.20 also updated MemInfoHob.h to fix SMBIOS Type 17
Offset 15h Speed report incorrectly issue.
BUG=None
TEST=Boot up with meowth platform and run dmidecode to see two dimm
entries under Type 17.
Change-Id: Ie1c4df162e75535ad458709452a76de01e31907e
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/25378
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update FSP header files to match GLK FSP Reference Code Release v2.0.0
Change-Id: I93d95e1977a4e31981e8b91882059611d91f78a5
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-on: https://review.coreboot.org/25247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Update Cannonlake FSP header to version 7.x.2A.20, the following changes
were made:
1. Add MemtestonWarmBoot option.
2. Add enable8254clockgatingonS3 option.
3. Default disable Tccoffsetlock
BUG=None
TEST=None
Change-Id: Ie794960f0253b2a6dbd55ffda973756d15e35c01
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/25289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
AGESA.bin was updated in the binary repo, so update the submodule pointer.
Among other changes, this added a callback "AGESA_HALT_THIS_AP", which
requires updated header files.
BUG=b:70338633
TEST=build kahlee.
Change-Id: I5a07f1c539d00aed34cfe45d6d7ef60c1dc56566
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25183
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|