| Age | Commit message (Collapse) | Author |
|---|
|
When coreboot checks the TPM and key-ladder state it issues a reboot of
the Cr50 with a delay parameter. Older Cr50 code doesn't support the
delay parameter and reboots immediately, which prevented coreboot from
running the mainboard specific code needed for the AP to come back up.
This change calls mainboard_prepare_cr50_reset() prior to sending the
VENDOR_CC_IMMEDIATE_RESET command.
This change also fixes a false error message from the coreboot log that
indicated "Unexpected Cr50 TPM mode 3" when the Cr50 key ladder is
disabled.
BUG=b:130830178
BRANCH=none
TEST=build coreboot on sarien and grunt platforms.
TEST=Load Cr50 v3.15, run 'gsctool -a -m disable; reboot'. Verify
corebot send the
VENDOR_CC_IMMEDIATE_RESET command and that the AP boots normally.
Verify event log shows "cr50 Reset Required"
TEST=Force Cr50 automatic update. Verify event log shows "cr50 Update
Reset".
Change-Id: Ib05c9cfde8e87daffd4233114263de5b30822872
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
As part of chromium:942901, physical dev switch functionality
is being deprecated.
Remove remaining references as well as helper macros.
BUG=chromium:942901
TEST=Build locally
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: Ib4eec083eb76d41b47685701f9394c684ddc6b37
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The r8152 kernel driver is expecting the AMAC() method to return
a raw buffer, not a string. To fix this simply remove the
ToString() in the return statement that was converting the buffer
to a string.
BUG=b:123925776
Change-Id: I7cd4244a1ccc7397d5969b817a52ea48867b4d17
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31807
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch is a raw application of
find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'
Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
MMIO operations are arch-agnostic so the include
path should not be arch/.
Change-Id: I0fd70f5aeca02e98e96b980c3aca0819f5c44b98
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31691
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds support for providing a MAC address that can be used
by the OS network drivers to change the MAC address that a NIC uses.
The Realtek r8152 driver in the Linux kernel supports a MAC address
passthru feature which can result in the dock ethernet port using the
same MAC address that is assigned to the internal NIC. This is done
by calling an ACPI method at \_SB.AMAC() which returns a formatted
string containing the MAC address for the dock to use.
The Linux kernel implementation can be found at
drivers/net/usb/r8152.c:vendor_mac_passthru_addr_read()
This is implemented specifically for Chrome OS as it relies on VPD
to determine the MAC address to supply.
The policy which controls where the dock MAC address comes from is
written into RW_VPD property "dock_passthru":
"dock_mac" or empty: Use MAC address from RO_VPD value "dock_mac"
"ethernet_mac0": Use MAC address from RO_VPD value "ethernet_mac0"
"builtin": existing dock MAC address (return nothing)
The MAC address in VPD is the standard format AA:BB:CC:DD:EE:FF and
it must be converted into the string format expected by the OS which
involves some string manipulation which ACPI is not great at handling.
BUG=b:123925776
TEST=this was tested on a sarien board by setting the VPD keys to
their expected values and observing if the AMAC() method returns the
expected string.
Change-Id: I3335e5d924155431e299844e2aaace62168294e0
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
|
|
This ACPI device presents an interface that allows other ACPI devices
or methods to read VPD strings. The VPDF() method is provided the
VPD partition to look in, and the name of the VPD key to find and it
will return the VPD string if it exists.
For example: VPD.VPDF ("RO", "serial_number")
BUG=b:123925776
TEST=this was tested on a sarien platform by adding ACPI code that
searches for a VPD key and returns the value it finds, and then setting
that VPD string from the OS with the Chrome OS 'vpd' utility to ensure
the ACPI method returns the correct value.
Change-Id: I4668f66d7f7f364ac8c3b064d406b24135abb0f6
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
|
|
Store the memory address of VPD region start and length for the memory
mapped RO_VPD and RW_VPD into GNVS so they can be used by ACPI code.
BUG=b:123925776
TEST=boot on sarien and verify VPD start/length in GNVS
Change-Id: I39073a9d78f5ff60bfe088860c087a5167f05fdf
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
|
|
When <symbols.h> was first introduced, it only declared a handful of
regions and we didn't expect that too many architectures and platforms
would need to add their own later. However, our amount of platforms has
greatly expanded since, and with them the need for more special memory
regions. The amount of code duplication is starting to get unsightly,
and platforms keep defining their own <soc/symbols.h> files that need
this as well.
This patch adds another macro to cut down the definition boilerplate.
Unfortunately, macros cannot define other macros when they're called, so
referring to region sizes as _name_size doesn't work anymore. This patch
replaces the scheme with REGION_SIZE(name).
Not touching the regions in the x86-specific <arch/symbols.h> yet since
they don't follow the standard _region/_eregion naming scheme. They can
be converted later if desired.
Change-Id: I44727d77d1de75882c72a94f29bd7e2c27741dd8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Under some scenarios the key ladder on the Cr50 can get disabled. If
this state is detected, trigger a reboot of the Cr50 to restore full
TPM functionality.
BUG=b:121463033
BRANCH=none
TEST=Built coreboot on sarien and grunt platforms.
TEST=Ran 'gsctool -a -m disable' and reboot. Verified coreboot sends
VENDOR_CC_IMMEDIATE_RESET command to Cr50 and that the Cr50 resets and
then the platform boots normally.
TEST=Performed Cr50 rollback to 0.0.22 which does not support the
VENDOR_CC_TPM_MODE command, confirmed that platform boots normally and
the coreboot log captures the unsupported command.
Tested-by: Keith Short <keithshort@chromium.org>
Change-Id: I70e012efaf1079d43890e909bc6b5015bef6835a
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Have the generated Chrome OS ACPI GPIO table provide the ACPI GPIO
pin number instead of the raw GPIO number when possible.
This is necessary if the OS uses a different numbering for GPIOs
that are reported in ACPI than the actual underlying GPIO number.
For example, if the SOC OS driver declares more pins in an ACPI GPIO
bank than there are actual pins in the hardware it will have gaps in
the number space.
This is a reworked version of 6217e9beff16d805ca833e79a2931bcdb3d02a44
which does not try to convert CROS_GPIO_VIRTUAL.
BUG=b:120686247
TEST=pass firmware_WriteProtect test on Sarien
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I3ad5099b7f2f871c7e516988f60a54eb2a75bef7
Reviewed-on: https://review.coreboot.org/c/31080
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
In order to allow the mainboard to configure the system before a
cr50 initiated update reset add a weak function that the mainboard
can override if necessary.
This will allow a board that would otherwise be configured to
stay off after an EC reset to instead power up after the reset and
not end up in a shut down state after a cr50 update.
BUG=b:121380403
TEST=update cr50 firmware on sarien and reboot
Change-Id: I11f9e8c9bfe810f69b4eaa2c633252c25004cbd0
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31057
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some boards may want to initialize watchdog in verstage instead of
bootblock or ramstage, so we need to add watchdog support in verstage.
BRANCH=none
BUG=b:120588396
TEST=build successfully
Change-Id: I13ab84f54d576a0e8c723070b5d9aadd9d63f87c
Signed-off-by: You-Cheng Syu <youcheng@google.com>
Reviewed-on: https://review.coreboot.org/c/30329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
This reverts commit 6217e9beff16d805ca833e79a2931bcdb3d02a44.
Reason for revert: boards with CROS_GPIO_VIRTUAL selected in
absence of dedicated recovery GPIO pin is die-ing now at
gpio.c file line. 127
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: Ief20681b2a7ed4d15fd2d637ae034d54a96b2d6f
Reviewed-on: https://review.coreboot.org/c/30278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Using a fixed filename only allows for one SAR configuration to be
checked into CBFS. However, we have devices with shared firmware that
would desire separate SAR configurations. This change allows boards to
define a function to select one of multiple files stored in CBFS to be
used.
BUG=b:120958726
BRANCH=octopus
TEST=build
Signed-off-by: Justin TerAvest <teravest@chromium.org>
Change-Id: Ib852aaaff39f1e9149fa43bf8dc25b2400737ea5
Reviewed-on: https://review.coreboot.org/c/30222
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
If the generic GPIO library is enabled the code that generates the
GPIO table in ACPI should attempt to get the GPIO pin value from
the gpio_acpi_pin() function.
BUG=b:120686247
TEST=Tested on Sarien board to ensure that GPIO pin exported by
Chrome OS for the Write Protect signal is correct.
Change-Id: I267694b576009f79bacac6eda5f32bbf51742d78
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/30132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Make the firmware slot configuration in VBOOT selectable. The following
three modes are available:
-RO only
-RO + RW_A
-RO + RW_A + RW_B
The mode "RO only" is the lowest mode with no safety during update.
You can select either RW_A or RW_AB via Kconfig which will add the
selected parttions to the final image.
Change-Id: I278fc060522b13048b00090b8e5261c14496f56e
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/27714
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
If the file `southbridge/intel/lynxpoint/nvs.h` is included in a file
that does not already include <stdint.h>, compilation errors result.
Adding the necessary <stdint.h> inclusions fixes compilation for an
ASRock H81M-HDS.
Change-Id: Id0d14705282cc959146e00dd47754ee8a2e8e825
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
board_reset() replaces the existing common reset API. There is no common
distinction between reset types across platforms, hence, common code
could never decide which one to call.
Currently only hard_reset() is used by common code. We replace these
calls and provide a fall-back to the current hard_reset() implemen-
tation. The fall-back will be removed along with hard_reset() after the
transition of all boards.
Change-Id: I274a8cee9cb38226b5a0bdff6a847c74ef0b3128
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
More platforms are not able to hibernate under certain circumstances,
such as when AC is plugged. This original path was conservatively put in
to prevent potential damage when cr50-update-caused asynchronous resets
occur. Julius' compelling argument that async resets from recovery mode
requests should have enough coverage of the design over the course of
project development. Remove the hibernate path and assume all is well
going forward.
Change-Id: I37121e75ff4e6abcb41d8534a1eccf0788ce2ea2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/29076
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Its spreading copies got out of sync. And as it is not a standard header
but used in commonlib code, it belongs into commonlib. While we are at
it, always include it via GCC's `-include` switch.
Some Windows and BSD quirk handling went into the util copies. We always
guard from redefinitions now to prevent further issues.
Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/28927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
VPD reference: https://chromium.googlesource.com/chromiumos/platform/vpd/+/master/README.md
Copy ChromeOS VPD driver to add support for VPD without CROMEOS.
Possible use case:
* Storing calibration data
* Storing MAC address
* Storing serial
* Storing boot options
+ Now it's possible to define the VPD space by choosing
one of the following enums: VPD_ANY, VPD_RW, VPD_RO.
+ CHROMEOS selects now VPD as part of it.
+ VPD is implemented as driver.
Change-Id: Id9263bd39bf25d024e93daa57053fefcb1adc53a
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25046
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Standardize on using vboot_handoff data structure for transferring
data between coreboot and depthcharge. chromeos_acpi_t.vdat is
undefined until set in depthcharge.
BUG=b:112288216
TEST=compile and run on eve
CQ-DEPEND=CL:1198814
Change-Id: Iccc021334d3c6f0145dffd5ca05beb9e430378a9
Signed-off-by: Joel Kitching <kitching@gmail.com>
Reviewed-on: https://review.coreboot.org/28407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
- Remove unused acpi_get_chromeos_acpi_info (see CB:28190)
- Make function naming in gnvs.h consistent (start with "chromeos_")
BUG=b:112288216
TEST=compile and run on eve
Change-Id: I5b0066bc311b0ea995fa30bca1cd9235dc9b7d1b
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/28406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Some ACPI interfaces introduced by Chrome or coreboot do not
need drivers outside ChromeOS, for example Chrome EC or
coreboot table; or will be probed by direct ACPI calls (instead
of trying to find drivers by device IDs).
These interfaces should be set to hidden so non-ChromeOS systems,
for example Windows, won't have problem finding driver.
Interfaces changed:
- coreboot (BOOT0000), only used by Chrome OS / Linux kernel.
- Chrome OS EC
- Chrome OS EC PD
- Chrome OS TBMC
- Chrome OS RAMoops
BUG=b:72200466
BRANCH=eve
TEST=Boot into non-ChromeOS systems (for example Windows)
and checked ACPI devices on UI.
Change-Id: I9786cf9ee07b2c3f11509850604f2bfb3f3e710a
Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/1078211
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Hung-Te Lin <hungte@chromium.org>
Tested-by: Hung-Te Lin <hungte@chromium.org>
Trybot-Ready: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/28333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since we can derive chromeos_acpi's location from that of
ACPI GNVS, remove chromeos_acpi entry from cbtable and
instead use acpi_gnvs + GVNS_CHROMEOS_ACPI_OFFSET.
BUG=b:112288216
TEST=None
CQ-DEPEND=CL:1179725
Change-Id: I74d8a9965a0ed7874ff03884e7a921fd725eace9
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/28190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch allows boards to disable turning off EC on cr50 update.
If CR50 resets the whole system, an EC reset is not required.
BUG=b:112604277
BRANCH=none
TEST=gsctool -a -u /media/removable/cr50.bin && reboot
Verify EC reboots. AP prints 'Waiting for CR50 reset to pick up update'
then reboots.
Change-Id: I60a7aa50a549e7a5a1a114245fbf7b9646d813bb
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/28110
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is a confusingly named section in cbmem called vdat.
This section holds a data structure called chromeos_acpi_t,
which exposes some system information to the Chrome OS
userland utility crossystem.
Within the chromeos_acpi_t structure, there is a member
called vdat. This (currently) holds a VbSharedDataHeader.
Rename the outer vdat to chromeos_acpi to make its purpose
clear, and prevent the bizarreness of being able to access
vdat->vdat.
Additionally, disallow external references to the
chromeos_acpi data structure in gnvs.c.
BUG=b:112288216
TEST=emerge-eve coreboot, run on eve
CQ-DEPEND=CL:1164722
Change-Id: Ia74e58cde21678f24b0bb6c1ca15048677116b2e
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/27888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
To comply with all relevant bodies throughout the world, SAR settings
take into account the lowest common denominator Tx power settings. This
setup may lead to non-optimal performance when the user location is in a
country that may allow higher power setting. The purpose of Wireless Geo
Delta Settings (WGDS) is to provide offset settings for FCC, Europe,
Japan and Rest of the world. These offsets would be added (by Intel wifi
driver) to the base SAR Tx Power as defined in WRDS and EWRD
BUG=b:65155728
BRANCH=none
TEST=WGDS ACPI table gets created as expected.
Change-Id: I4f602e3f95ff3545db6cc6e428beb9a36abd9296
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/21098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
* Remove 2nd software stack in pc80 drivers directory.
* Create TSPI interface for common usage.
* Refactor TSS / TIS code base.
* Add vendor tss (Cr50) directory.
* Change kconfig options for TPM to TPM1.
* Add user / board configuration with:
* MAINBOARD_HAS_*_TPM # * BUS driver
* MAINBOARD_HAS_TPM1 or MAINBOARD_HAS_TPM2
* Add kconfig TPM user selection (e.g. pluggable TPMs)
* Fix existing headers and function calls.
* Fix vboot for interface usage and antirollback mode.
Change-Id: I7ec277e82a3c20c62a0548a1a2b013e6ce8f5b3f
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/24903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
* Rename tlcl* to tss* as tpm software stack layer.
* Fix inconsistent naming.
Change-Id: I206dd6a32dbd303a6d4d987e424407ebf5c518fa
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/22104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
* Move code from src/lib and src/include into src/security/tpm
* Split TPM TSS 1.2 and 2.0
* Fix header includes
* Add a new directory structure with kconfig and makefile includes
Change-Id: Id15a9aa6bd367560318dfcfd450bf5626ea0ec2b
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/22103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch makes AP send EC_REBOOT_HIBERNATE_CLEAR_AP_OFF, which makes
EC clear AP_OFF flag then hibernate.
This is needed to make Chromebox boot when cr50 toggles the EC's reset
line after TURN_UPDATE_ON command.
BUG=b:69721737
BRANCH=none
CQ-DEPEND=CL:802632
TEST=Verify Fizz reboot after cr50 update.
Change-Id: I5f590286393ac21382cab64afdccae92d3fc14ba
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/22657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
794d222886 "cr50_enable_update: Add printk before EC hibernate"
inserted printk and kicked out google_chromeec_reboot from the
if-clause. This patch fixes it.
BUG=none
BRANCH=none
TEST=none
Change-Id: I058e929e2acd883d2265b2ab019743e3849cb3af
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/22668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This commit just moves the vboot sources into
the security directory and fixes kconfig/makefile paths.
Fix vboot2 headers
Change-Id: Icd87f95640186f7a625242a3937e1dd13347eb60
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/22074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add printout before EC hibernates during a cr50 update to clarify that
failure is due to EC rather than cr50. Ran into a situation where DUT
shut down during cr50 update and the EC was the culprit.
BUG=None
BRANCH=None
TEST=None
Change-Id: I54813fec123de69604d1da4dfc65eaeb77d1662e
Signed-off-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://review.coreboot.org/22120
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Also unify __attribute__ ((..)) to __attribute__((..)) and
handle ((__packed__)) like ((packed))
Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/15921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I891cb4f799aaafcf4a0dd91b5533d2f8db7f3d61
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The AP sends the Cr50 a request to enable the new firmware image. If
the new Cr50 image was found and enabled, the AP expects the Cr50 to
reset the device in 1 second.
While waiting for the Cr50 to reset, the AP logs a newly defined event
and optionally shuts down the system. By default the x86 systems power
off as shutting those systems down is not board specific.
BRANCH=gru,reef
BUG=b:35580805
TEST=built a reef image, observed that in case cr50 image is updated,
after the next reboot the AP stops booting before loading depthcharge,
reports upcoming reset and waits for it.
Once the system is booted after that, the new event can be found
in the log:
localhost ~ # mosys eventlog list
...
7 | 2017-03-23 18:42:12 | Chrome OS Developer Mode
8 | 2017-03-23 18:42:13 | Unknown | 0xac
9 | 2017-03-23 18:42:21 | System boot | 46
...
Change-Id: I45fd6058c03f32ff8edccd56ca2aa5359d9b21b1
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/18946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The CR50 TPM can do both SPI and I2C communication. However,
there's situations where policy needs to be applied for CR50
generically regardless of the I/O transport. Therefore add
MAINBOARD_HAS_TPM_CR50 to encompass that. Additionally,
once the mainboard has selected CR50 TPM automatically select
MAINBOARD_HAS_TPM2 since CR50 TPM is TPM 2.0.
Change-Id: I878f9b9dc99cfb0252d6fef7fc020fa3d391fcec
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19370
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
This patch attempts to finish the separation between CONFIG_VBOOT and
CONFIG_CHROMEOS by moving the remaining options and code (including
image generation code for things like FWID and GBB flags, which are
intrinsic to vboot itself) from src/vendorcode/google/chromeos to
src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig
options, and clean up menuconfig visibility for them (i.e. some options
were visible even though they were tied to the hardware while others
were invisible even though it might make sense to change them).
CQ-DEPEND=CL:459088
Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18984
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This callback was only required for a single mainboard, and it can
easily be moved to mainboard-specific code. This patch removes it from
the global namespace and isolates it to the Jecht board. (This makes
it easier to separate vboot and chromeos code in a later patch.)
Change-Id: I9cf67a75a052d1c86eda0393b6a9fbbe255fedf8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18981
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The virtualized developer switch was invented five years ago and has
been used on every vboot system ever since. We shouldn't need to specify
it again and again for every new board. This patch flips the Kconfig
logic around and replaces CONFIG_VIRTUAL_DEV_SWITCH with
CONFIG_PHYSICAL_DEV_SWITCH, so that only a few ancient boards need to
set it and it fits better with CONFIG_PHYSICAL_REC_SWITCH. (Also set the
latter for Lumpy which seems to have been omitted incorrectly, and hide
it from menuconfig since it's a hardware parameter that shouldn't be
configurable.)
Since almost all our developer switches are virtual, it doesn't make
sense for every board to pass a non-existent or non-functional developer
mode switch in the coreboot tables, so let's get rid of that. It's also
dangerously confusing for many boards to define a get_developer_mode()
function that reads an actual pin (often from a debug header) which will
not be honored by coreboot because CONFIG_PHYSICAL_DEV_SWITCH isn't set.
Therefore, this patch removes all those non-functional instances of that
function. In the future, either the board has a physical dev switch and
must define it, or it doesn't and must not.
In a similar sense (and since I'm touching so many board configs
anyway), it's annoying that we have to keep selecting EC_SOFTWARE_SYNC.
Instead, it should just be assumed by default whenever a Chrome EC is
present in the system. This way, it can also still be overridden by
menuconfig.
CQ-DEPEND=CL:459701
Change-Id: If9cbaa7df530580a97f00ef238e3d9a8a86a4a7f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18980
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The correct way to mock out vboot TPM accesses these days is the
CONFIG_VBOOT_MOCK_SECDATA Kconfig option. There are some remnants of
older TPM-mocking infrastructure in our codebase that are as far as I
can tell inert. Remove them.
Change-Id: I3e00c94b71d53676e6c796e0bec0f3db67c78e34
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18977
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
cr50 by default delays nvmem commits internally from the point of
reset to accumulate change state. However, the factory process can
put a board into dev mode through the recovery screen. This state
is stored in the TPM's nvmem space. When the factory process is
complete a disable_dev_request and battery_cutoff_request is performed.
This leads to disabling the dev mode in TPM, but the battery is
subsequently cut off so the nvmem contents never stick. Therefore,
whenever antirollback_write_space_firmware() is called we know there
was a change in secdata so request cr50 to immediately enable nvmem
commits going forward. This allows state changes to happen immediately.
The fallout from this is that when secdata is changed that current
boot will take longer because every transaction that writes to TPM
nvmem space will perform a write synchronously. All subsequent boots
do not have that effect.
It should also be noted that this approach to the implementation is
a pretty severe layering violation. However, the current TPM APIs
don't lend themselves well to extending commands or re-using code
outside of the current routines which inherently assume all knowledge
of every command (in conflict with vendor commands since those are
vendor-specific by definition).
BUG=b:35775104
BRANCH=reef
TEST=Confirmed disablement of dev mode sticks in the presence of:
crossystem disable_dev_request=1; crossystem
battery_cutoff_request=1; reboot;
Change-Id: I3395db9cbdfea45da1f5cb994c6570978593b944
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/18681
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The event log entry indicating developer mode is useful for the
boot path, but is not really useful on the resume path and removing
it makes the event log easier to read when developer mode is enabled.
To make this work I have to use #ifdef around the ACPI code since
this is shared with ARM which does not have acpi.h.
BUG=b:36042662
BRANCH=none
TEST=perform suspend/resume on Eve and check that the event log
does not have an entry for Chrome OS Developer Mode.
Change-Id: I1a9d775d18e794b41c3d701e5211c238a888501a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18665
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This reverts commit 580db7fd9036134b1da4fe7340e306fee4681659.
There's a (parallel) mechanism more closely aligned with how the values
are filled in (fixed device part + version string) that landed from
Chrome OS downstream (see commit 4399b85fdd).
Change-Id: I5ccd06eadabb396452cc9d1d4dff780ea0720523
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18205
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
On Chrome OS devices that use TPM2 parts the platform hierarchy
is disabled by the boot loader, depthcharge. Since the bootloader
isn't involved in resuming a suspended machine there's no equivalent
action in coreboot to disable the platform hierarchy. Therefore, to
ensure consistent state in resume the platform hierarchy in the TPM2
needs to be disabled as well. For systems that resume using the
firmware the platform hierarchy is disabled when utilizing
TPM2 devices.
BUG=chrome-os-partner:61097
BRANCH=reef
TEST=Suspend and resume. Confirmed 'stop trunksd; tpmc getvf; start
trunksd' shows that phEnable is 0.
Change-Id: I060252f338c8fd68389273224ee58caa99881de8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/18096
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Build issues were somehow overlooked in commit
ed840023a84915ece4bc63edffef979926107d55:
1. hexstrtobin is not defined (needs the lib.h);
2. coreboot default compiler doesn't like variable initialization
within for loop.
BUG=chrome-os-partner:60821
TEST=Build and boot lars and reef
Change-Id: Ie52c1f93eee7d739b8aaf59604875f179dff60d0
Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-on: https://review.coreboot.org/18076
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
A VPD entry "wifi_sar" needs to be created which contains a heximal
encoded string in length of 40 bytes. get_wifi_sar_limits() function
retrieves and decodes the data from the VPD entry, which would later
be consumed by platform code.
BUG=chrome-os-partner:60821
TEST=Build and boot lars and reef
Change-Id: I923b58a63dc1f8a7fdd685cf1c618b2fdf4e7061
Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-on: https://review.coreboot.org/17958
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In the factory it's helpful for knowing when a system being
built is meant for release with all the security features
locked down. Provide support for exporting this type of pin
in the acpi tables.
BUG=chrome-os-partner:59951
BRANCH=reef
Change-Id: Iec70249f19fc36e5c9c3a05b1395f84a3bcda9d0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17802
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
BUG=chromium:595715
BRANCH=none
TEST=/build/$board/firmware/coreboot.rom has a zeroed out SHARED_DATA
region if it exists.
Change-Id: Ib1e6fd62bcf987872890c6d155287dcedb0b1f40
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e8a88bf744f44d034f8606a556014e2bee37eda1
Original-Change-Id: I0b59f1f0e2f8645000f83cb3ca7f49e4da726341
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/417821
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://review.coreboot.org/17789
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Chrome OS images have three firmware ID regions, to store version
information for the read-only and the two read-write areas. Fill them
with a suitable default and allow configuring a different scheme.
There's already an override in google/foster and google/rotor to match
the naming scheme used so far (in depthcharge).
BUG=chromium:595715
BRANCH=none
TEST=/build/$board/firmware/coreboot.rom has the expected values in the
regions.
Change-Id: I5fade5971135fa0347d6e13ec72909db83818959
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d2e3be81faa8d21f92325294530714a4b18a1b3e
Original-Change-Id: I2fa2d51eacd832db6864fb67b6481b4d27889f52
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/417320
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://review.coreboot.org/17788
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Instead of defining the same functions for reading/clearing boot-mode
switches from EC in every mainboard, add a common infrastructure to
enable common functions for handling boot-mode switches if
GOOGLE_CHROMEEC is being used.
Only boards that were not moved to this new infrastructure are those
that do not use GOOGLE_CHROMEEC or which rely on some mainboard specific
mechanism for reading boot-mode switches.
BUG=None
BRANCH=None
TEST=abuild compiles all boards successfully with and without ChromeOS
option.
Change-Id: I267aadea9e616464563df04b51a668b877f0d578
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17449
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=chrome-os-partner:59352
BRANCH=None
TEST=Compiles successfully
Change-Id: I87cd675ea45a8b05a178cf64119bf5f9d8d218ca
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17408
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Provide an option to deliver the mainboard smbios version in the
form of 'rev%d' based on the board_id() value.
BUG=chromium:663243
Change-Id: If0a34935f570612da6e0c950fd7e8f0d92b6984f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17290
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Kconfig hex values don't need to be in quotes, and should start with
'0x'. If the default value isn't set this way, Kconfig will add the
0x to the start, and the entry can be added unnecessarily to the
defconfig since it's "different" than what was set by the default.
A check for this has been added to the Kconfig lint tool.
Change-Id: I86f37340682771700011b6285e4b4af41b7e9968
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16834
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Instead of assuming SPI backing use a region_device to
abstract away the underlying storage mechanism.
BUG=chrome-os-partner:55932
Change-Id: I6b0f5a7e9bea8833fb1bca87e02abefab63acec3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16204
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
CONFIG_VBOOT was recently moved to be independent from CONFIG_CHROMEOS.
However, the latter still has some 'select' clauses to ensure that
required TPM libraries are built. The TPM is an essential part of vboot,
and without these libraries the vboot code cannot compile... therefore,
they should be moved under CONFIG_VBOOT.
Change-Id: I0145558e5127c65c6a82d62f25b5a39e24cb8726
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16229
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This option is no longer used in the code base. Remove it.
BUG=chrome-os-partner:56151
Change-Id: Ia73cce7546c9839518c9e931b03c50856abc2018
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16186
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch enables the CHROMEOS_RAMOOPS_NON_APCI Kconfig option as a
default across all non-x86 Chrome OS boards.
CQ-DEPEND=CL:367905
BRANCH=None
BUG=None
TEST=See depthcharge CL.
Change-Id: If14ef4f9b1bd480f2d52df3892c73059bb9b07d5
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 8c3b74fb21aadd6de7af62f32fa98fc211d75085
Original-Change-Id: I16ff7f68762a995cd38e5fddaf6971d4b9f07e21
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/368010
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16154
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The elog.c file had stale includes no longer needed. Remove them.
BUG=chrome-os-partner:55932
Change-Id: I891a57d08281c3c56e9d35489d6dea6c47eaa27b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16085
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This replaces all occurrences of a hardcoded vboot path to the
VBOOT_SOURCE variable, that may be overridden from the command line,
witch fallback to the source from 3rdparty.
Change-Id: Ia57d498d38719cc71e17060b76b0162c4ab363ed
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15825
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Use the ACPI generator for creating the Chrome OS gpio
package. Each mainboard has its own list of Chrome OS
gpios that are fed into a helper to generate the ACPI
external OIPG package. Additionally, the common
chromeos.asl is now conditionally included based on
CONFIG_CHROMEOS.
Change-Id: I1d3d951964374a9d43521879d4c265fa513920d2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15909
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
BUG=chrome-os-partner:55639
Change-Id: I40a28f921499ddf43d8b423f5192ac93b40254c1
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15903
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
1. Currenty, boot reason is being added to elog only for some
ARM32/ARM64 platforms. Change this so that boot reason is logged by
default in elog for all devices which have CHROMEOS selected.
2. Add a new option to select ELOG_WATCHDOG_RESET for the devices that
want to add details about watchdog reset in elog. This requires a
special region WATCHDOG to be present in the memlayout.
3. Remove calls to elog add boot reason and watchdog reset from
mainboards.
BUG=chrome-os-partner:55639
Change-Id: I91ff5b158cfd2a0749e7fefc498d8659f7e6aa91
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15897
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:55639
Change-Id: I3ac2b256862758bb5c9e6c2f1311972af474e8f6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15870
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
With VBOOT_VERIFY_FIRMWARE separated from CHROMEOS, move recovery and
developer mode check functions to vboot. Thus, get rid of the
BOOTMODE_STRAPS option which controlled these functions under src/lib.
BUG=chrome-os-partner:55639
Change-Id: Ia2571026ce8976856add01095cc6be415d2be22e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15868
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
VBOOT_VERIFY_FIRMWARE should be independent of CHROMEOS. This allows use
of verified boot library without having to stick to CHROMEOS.
BUG=chrome-os-partner:55639
Change-Id: Ia2c328712caedd230ab295b8a613e3c1ed1532d9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15867
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This renames the VB_SOURCE variable to VBOOT_SOURCE in the build system,
providing increased clarity about what it represents.
Since the submodule itself is called "vboot", it makes sense to use that
name in full instead of a very shortened (and confusing) version of it.
Change-Id: Ib343b6642363665ec1205134832498a59b7c4a26
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15824
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
On some x86 platforms (skylake, apollolake), we observe reboots at
different steps during the FSP initialization. These additional reboots
result in loss of recovery request because vboot_reference library
clears recovery request on vbnv once verification is complete and it has
made a decision about which boot path to take(normal/dev, slot-a/slot-b,
recovery).
Provide a way to allow mainboards/chipsets to inform recovery module in
vboot2 to save recovery reason to survive unexpected reboots. The
recovery reason is set in vbnv after vboot_reference library completes
its verification and clears the reason in vbnv while jumping to
payload.
BUG=chrome-os-partner:55431
Change-Id: Ie96be9aeb42c8209d8215943409e6327d6a8bf98
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15802
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add recovery module in vboot2 that checks if a recovery request is
pending and returns appropriate reason code:
1. Checks if recovery mode is initiated by EC.
2. Checks if recovery request is present in VBNV.
3. Checks if recovery request is present in handoff for post-cbmem
stages.
4. Checks if vboot verification is complete and looks up selected region
to identify if recovery is requested by vboot library.
BUG=chrome-os-partner:55431
Change-Id: I31e332a4d014a185df2434c3730954e08dc27281
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15800
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
1. Remove unused functions/structures.
2. Add checks for NULL return values.
3. Change prefixes to vb2 instead of vboot for functions used internally
within vboot2/
4. Get rid of vboot_handoff.h file and move the structure definition to
vboot_common.h
5. Rename all functions using handoff structure to have prefix
vboot_handoff_*. All the handoff functions can be run _only_ after cbmem
is online.
6. Organize vboot_common.h content according to different
functionalities.
BUG=chrome-os-partner:55431
Change-Id: I4c07d50327d88cddbdfbb0b6f82c264e2b8620eb
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15799
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This fills up the RO_FRID, RW_FWID_A and RW_FWID_B FMAP sections with
the relevant version from KERNELVERSION, padded to the right size and
gap-filled with zeros.
Change-Id: I45c724555f8e41be02b92ef2990bf6710be805c2
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15604
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
TPM1.2 is using the somewhat misnamed tlcl_set_global_lock() command
function to lock the hardware rollback counter. For TPM2 let's
implement and use the TPM2 command to lock an NV Ram location
(TPM2_NV_WriteLock).
BRANCH=none
BUG=chrome-os-partner:50645
TEST=verified that TPM2_NV_WriteLock command is invoked before RO
firmware starts RW, and succeeds.
Change-Id: I52aa8db95b908488ec4cf0843afeb6310dc7f38b
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 2f859335dfccfeea900f15bbb8c6cb3fd5ec8c77
Original-Change-Id: I62f22b9991522d4309cccc44180a5ebd4dca488d
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/358097
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Darren Krahn <dkrahn@chromium.org>
Reviewed-on: https://review.coreboot.org/15638
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
tlcl_force_clear() needs to be issued each time when the device mode
switches between normal/development/recovery.
This patch adds command implementation using TPM_Clear TPM2 command,
and also invokes it before factory initialization.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=verified that TPM_Clear command succeeds at factory startup and
the boot proceeds normally.
Change-Id: Ia431390870cbe448bc1b6f1755ed17953be9bdf1
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 347ff17b97da45fa4df547ff32f9dd2c8972cefd
Original-Change-Id: I2a0e62527ad46f9dd060afe5e75c7e4d56752849
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/358095
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Darren Krahn <dkrahn@chromium.org>
Reviewed-on: https://review.coreboot.org/15636
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
The TPM2 specification allows defining NV ram spaces in a manner
that makes it impossible to remove the space until a certain PCR is in
a certain state.
This comes in handy when defining spaces for rollback counters: make
their removal depend on PCR0 being in the default state. Then extend
PCR0 to any value. This guarantees that the spaces can not be deleted.
Also, there is no need t create firmware and kernel rollback spaces
with different privileges: they both can be created with the same set of
properties, the firmware space could be locked by the RO firmware, and
the kernel space could be locked by the RW firmware thus providing
necessary privilege levels.
BRANCH=none
BUG=chrome-os-partner:50645, chrome-os-partner:55063
TEST=with the rest of the patches applied it is possible to boot into
Chrome OS maintaining two rollback counter spaces in the TPM NV
ram locked at different phases of the boot process.
Change-Id: I889b2c4c4831ae01c093f33c09b4d98a11d758da
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 36317f5e85107b1b2e732a5bb2a38295120560cd
Original-Change-Id: I69e5ada65a5f15a8c04be9def92a8e1f4b753d9a
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/358094
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15635
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
This patch adds a TPM2 specific path in the vboot2 initialization
sequence when the device is turned on in the factory for the first
time, namely two secure NVRAM spaces are created, with different
access privileges.
The higher privilege space can be modified only be the RO firmware,
and the lower privilege space can be modified by both RO and RW
firmware.
The API is being modified to hide the TPM implementation details from
the caller.
Some functions previously exported as global are in fact not used
anywhere else, they are being defined static.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=when this code is enabled the two secure spaces are successfully
created during factory initialization.
Original-Commit-Id: 5f082d6a9b095c3efc283b7a49eac9b4f2bcb6ec
Original-Change-Id: I917b2f74dfdbd214d7f651ce3d4b80f4a18def20
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/353916
Original-Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Original-Reviewed-by: Darren Krahn <dkrahn@chromium.org>
squashed:
mock tpm: drop unused functions
safe_write() and safe_define_space() functions are defined in
secdata_mock.c, but not used in mocked TPM mode.
The actual functions have been redefined as static recently and their
declarations were removed from src/include/antirollback.h, which now
causes compilation problems when CONFIG_VBOOT2_MOCK_SECDATA is
defined.
Dropping the functions from secdata_mock.c solves the problem.
BRANCH=none
BUG=none
TEST=compilation in mock secdata mode does not fail any more.
Original-Commit-Id: c6d7824f52534ecd3b02172cb9078f03e318cb2b
Original-Change-Id: Ia781ce99630d759469d2bded40952ed21830e611
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/356291
Original-Tested-by: Caesar Wang <wxt@rock-chips.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Change-Id: Icb686c5f9129067eb4bb3ea10bbb85a075b29955
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/15571
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
If read_vbnv finds that the vbnv_copy is not valid, it initializes it
with the correct HEADER_SIGNATURE and other attributes. However, the
vbnv copy is checked for validity and initialized at the vboot layer as
well. Since, vboot is the owner of this data, it should be the one
initializing it. Thus, if read_vbnv sees that the data is not valid,
simply reset it to all 0s and let vboot layer take care of it. This also
removes the need for additional checks to ensure that the dirty vbnv
copy is properly updated on storage.
Change-Id: I6101ac41f31f720a6e357c9c56e571d62e0f2f47
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15498
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Currently, read_vbnv performs a reset of the vbnv cache if it is not
valid. However, this information is not passed up to the vboot layer,
thus resulting in missed write-back of vbnv cache to storage if vboot
does not update the cache itself.
Update read_vbnv to return a value depending upon whether it wants a
write-back to be performed when save is called.
Return value:
0 = No write-back required
1 = Write-back of VBNV cache is required.
Change-Id: I239939d5f9731d89a9d53fe662321b93fc1ab113
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15457
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Until now it was assumed that all TPM devices were of the same type
(TCG 1.2 spec compliant) and x86 based boards had LPC connected TPMs
and all other boards had I2C connected TPMs.
With the advent of TPM2 specification there is a need to be able to
configure different combinations of TPM types (TPM or TPM2) and
interfaces (LPC, I2C and SPI).
This patch allows to do it. Picking Chrome OS still assumes that the
board has a TPM device, but adding MAINBOARD_HAS_TPM2 to the board's
Kconfig will trigger including of TPM2 instead.
MAINBOARD_HAS_LPC_TPM forces the interface to be set to LPC, adding
SPI_TPM to the board config switches interface choice to SPI, and if
neither of the two is defined, the interface is assumed to be I2C.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=verified that none of the generated board configurations change
as a result of this patch. With the rest of the stack in place it
is possible to configure different combinations of TPM types and
interfaces for ARM and x86 boards.
Change-Id: I24f2e3ee63636566bf2a867c51ed80a622672f07
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 5a25c1070560cd2734519f87dfbf401c135088d1
Original-Change-Id: I659e9301a4a4fe065ca6537ef1fa824a08d36321
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/349850
Original-Reviewed-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/15294
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
The VBOOT_OPROM_MATTERS configuration option signals to vboot that the
board can skip display initialization in the normal boot path. It's name
is a left-over from a time when this could only happen by avoiding
loading the VGA option ROM on x86 devices. Now we have other
boards that can skip their native display initialization paths too, and
the effect to vboot is the same. (Really, we should rename oprom_matters
and oprom_loaded to display_skippable and display_initialized or
something, but I don't think that's worth the amount of repositories
this would need to touch.)
The only effect this still has in today's vboot is to reboot and
explicitly request display initialization for EC software sync on
VBOOT_EC_SLOW_UPDATE devices (which we haven't had yet on ARM). Still,
the vboot flag just declares the capability (for skipping display init),
and it should be set correctly regardless of whether that actually makes
a difference on a given platform (right now). This patch updates all
boards/SoCs that have a conditional path based on
display_init_required() accordingly.
BRANCH=None
BUG=chrome-os-partner:51145
TEST=Booted Oak, confirmed that there's no notable boot time impact.
Change-Id: Ic7c77dbd8356d67af7aee54e7869f9ac35241b99
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 9c242f7
Original-Change-Id: I75e5cdda2ba2d111ea50ed2c7cdf94322679f1cd
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/348786
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15113
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
When the vboot cbfs selection runs in postcar stage it should be
utilizing cbmem to locate the vboot selected region.
Change-Id: I027ba19438468bd690d74ae55007393f051fde42
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14959
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add cmos init helper function.
This function saves the Vboot NV data, calls cmos init
and restores the Vboot NV data.
Change-Id: I8475f23d849fb5b5a2d16738b4d5e99f112883da
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/14898
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Using a dedicated variable is slightly less readable and makes the code
less consistent, given that other test functions are called directly in
the if statements.
Change-Id: If52b2a4268acb1e2187574d15cc73a0c1d5fe9bb
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/14817
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
On modern x86 platforms like apollolake, pre-RAM stages verstage and
romstage run within the cache-as-ram region. Thus, we do not need to
pass in the --xip parameter to cbfstool while adding these
stages. Introduce a new Kconfig variable NO_XIP_EARLY_STAGES which is
default false for all x86 platforms. Apollolake selects this option
since it supports code execution with CAR.
Change-Id: I2848046472f40f09ce7fc230c258b0389851b2ea
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14623
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
In the case where one of the FW_MAIN regions is empty, the last file
(empty) will also appear to be first and have a zero offset, making head
complain.
This is a very borderline use case, since the FW_MAIN_ regions should
have been filled previously, but an extra check doesn't hurt.
Change-Id: I15491c5b4a5e7d1f9fb369cc5fa4e3875e2dad3b
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/14472
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ide3202fca75c77ccebf17d61d93945ba7834a13b
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14398
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The codepath was untested and incomplete. It now determines the right
GBB region sizes and puts the data in.
BUG=chromium:595715
BRANCH=none
TEST=none
Change-Id: I2cc47ddd8aa7675375ca5ed5f75632c30c65dd1e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 36e026404ed049d61b677ef043a781c8c209dd93
Original-Change-Id: Ib872627740dbd8ac19fc3e2a01464457f38366ed
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/336358
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14239
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This mirrors vboot's flag table.
BUG=chromium:595715
BRANCH=none
TEST=none
Change-Id: I4473eb6c0e073f555e6a692a447e8cc85f8e4eeb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0fc50a6cff5ba900e6407d58a8f18db63b5946a5
Original-Change-Id: Ieabd3f9391ba256557e18386f334558d64a81694
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/336630
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14238
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The MT8173 hardware watchdog can assert an external signal which we use
to reset the TPM on Oak. Therefore we do not need to do the same
double-reset dance as on other Chromebooks to ensure that we reset in a
correct state.
Still, we have a situation where we need to reconfigure the watchdog
early in the bootblock in a way that will clear information about the
previous reboot from the status register, and we need that information
later in ramstage to log the right event. Let's reuse the same watchdog
tombstone mechanism from other boards, except that we don't perform a
second reset and the tombstone is simply used to communicate between
bootblock and ramstage within the same boot.
BRANCH=None
BUG=None
TEST=Run 'mem w 0x10007004 0x8' on Oak, observe how it reboots and how
'mosys eventlog list' shows a hardware watchdog reboot event afterwards.
Change-Id: I1ade018eba652af91814fdaec233b9920f2df01f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 07af37e11499e86e730f7581862e8f0d67a04218
Original-Change-Id: I0b9c6b83b20d6e1362d650ac2ee49fff45b29767
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/334449
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14234
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
When doing verification of memory init code in verstage vboot
should issue a TPM_Startup(ST_STATE) instead of TPM_Startup(ST_CLEAR)
in order to preserve the flags in TPM_STCLEAR_FLAGS which include
things like physical presence. In doing so we can also skip the rest
of the TPM init work in this function in the S3 resume path.
BUG=chrome-os-partner:50633
BRANCH=glados
TEST=S3 resume on chell and ensure TPM is resumed instead of being
cleared and that 'tpmc getvf|getpf|getf' does not show any difference
in flags between boot and resume.
Change-Id: I7a48eaf7f57d2bc6ebc182178cbe60ceb2ad8863
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f059f39a0f5c2f21e564b9554efacf26a41ad794
Original-Change-Id: I647869202d2f04328764155d3de4cad9edf10ae4
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Previous-Reviewed-on: https://chromium-review.googlesource.com/332434
Original-(cherry picked from commit 5fc7792e4104523569140cd84ce313da721ec34b)
Original-Reviewed-on: https://chromium-review.googlesource.com/332542
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14107
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
In ChromeOS VPD spec the right name is "region".
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/322851
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: mukesh agrawal <quiche@chromium.org>
(cherry picked from commit 21ea0663e7f3ffe3aaea6b6ce0e1216fcd9ca23e)
BUG=chrome-os-partner:50516
BRANCH=glados
TEST=build and boot on chell
Change-Id: I4ba9a9c65af3732fa263030640495ab5bea91d1f
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 848f18e731eb11dd3037d12607d7364f95e64e34
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Change-Id: Ib96036f9cd76449f170af5c3dd6ef6e8e91ded94
Original-Reviewed-on: https://chromium-review.googlesource.com/329293
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13837
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
If a platform does verification of the memory init step, and it must
resume with the same slot that it booted from then it needs to set
the vboot context flag when resuming instead of booting. This will
affect the slot that is selected to verify and resume from.
BUG=chromium:577269
BRANCH=glados
TEST=manually tested on chell:
1) ensure that booting from slot A resumes from slot A.
2) ensure that booting from slot B resumes from slot B.
3) do RW update while booted from slot A (so the flags are set to try
slot B) and ensure that suspend/resume still functions properly using
current slot A.
4) do RW update while booted from slot B (so the flags are set to try
slot A) and ensure that suspend/resume still functions properly using
current slot B.
Change-Id: I77e6320e36b4d2cbc308cfb39f0d4999e3497be3
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 4c84af7eae7b2a52a28cc3ef8a80649301215a68
Original-Change-Id: I395e5abaccd6f578111f242d1e85e28dced469ea
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/328775
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13834
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch ports the LZ4 decompression code that debuted in libpayload
last year to coreboot for use in CBFS stages (upgrading the base
algorithm to LZ4's dev branch to access the new in-place decompression
checks). This is especially useful for pre-RAM stages in constrained
SRAM-based systems, which previously could not be compressed due to
the size requirements of the LZMA scratchpad and bounce buffer. The
LZ4 algorithm offers a very lean decompressor function and in-place
decompression support to achieve roughly the same boot speed gains
(trading compression ratio for decompression time) with nearly no
memory overhead.
For now we only activate it for the stages that had previously not been
compressed at all on non-XIP (read: non-x86) boards. In the future we
may also consider replacing LZMA completely for certain boards, since
which algorithm wins out on boot speed depends on board-specific
parameters (architecture, processor speed, SPI transfer rate, etc.).
BRANCH=None
BUG=None
TEST=Built and booted Oak, Jerry, Nyan and Falco. Measured boot time on
Oak to be about ~20ms faster (cutting load times for affected stages
almost in half).
Change-Id: Iec256c0e6d585d1b69985461939884a54e3ab900
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13638
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This symbol is not defined.
Change-Id: I2b0a3fca82d85962fc882f237b70702cab0400db
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/13647
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
See discussion on https://review.coreboot.org/13600 and
https://review.coreboot.org/13601
Change-Id: Ia8274b0b296d6b398f75c0d91a6fded4c5f57e10
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13643
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
These files aren't updated (or updatable), and as such don't need to be
copied to the RW sections.
Change-Id: Ie78936792ad651fbf8500fc7e34f0899e33a904c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13633
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds a new kconfig option that will back up the VBNV data
from CMOS to flash, and restore it if the CMOS data is invalid
during boot.
This allows special flags to not get lost when power is lost,
RTC reset is triggered, or CMOS is corrupted.
BUG=chrome-os-partner:47915
BRANCH=glados
TEST=manually tested on chell:
1-boot and run "enable_dev_usb_boot"
2-reboot and check that it is enabled with crossystem
3-run "mosys nvram clear"
4-reboot and check that it is still enabled
Change-Id: I38103d100117da34471734a6dd31eb7058735c12
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8a356e616c6885d5ae3b776691929675d48a28f9
Original-Change-Id: I06e7ddff7b272e579c704914a0cf8cc14d6994e8
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324122
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13600
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Certain platforms query the recovery mode switch more than just within
vboot during the boot flow. Therefore, it's important that the first call to
get_recovery_mode_switch() is consistent through memory training because
certain platforms use the recovery mode switch to take different action
for memory training. Therefore, defer the clearing of the rec mode
switch to a place when it's known that memory is up and online.
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=Three finger salute is honored on chell by retraining memory.
Change-Id: I26ea51de7ffa2fe75b9ef1401fe92f9aec2b4567
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6b0de9369242e50c7ff3b164cf1ced0642c7b087
Original-Change-Id: Ia7709c7346d1222e314bf3ac7e4335a63e9a5144
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/325120
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13604
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
