| Age | Commit message (Collapse) | Author |
|---|
|
Also unify __attribute__ ((..)) to __attribute__((..)) and
handle ((__packed__)) like ((packed))
Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/15921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I891cb4f799aaafcf4a0dd91b5533d2f8db7f3d61
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The AP sends the Cr50 a request to enable the new firmware image. If
the new Cr50 image was found and enabled, the AP expects the Cr50 to
reset the device in 1 second.
While waiting for the Cr50 to reset, the AP logs a newly defined event
and optionally shuts down the system. By default the x86 systems power
off as shutting those systems down is not board specific.
BRANCH=gru,reef
BUG=b:35580805
TEST=built a reef image, observed that in case cr50 image is updated,
after the next reboot the AP stops booting before loading depthcharge,
reports upcoming reset and waits for it.
Once the system is booted after that, the new event can be found
in the log:
localhost ~ # mosys eventlog list
...
7 | 2017-03-23 18:42:12 | Chrome OS Developer Mode
8 | 2017-03-23 18:42:13 | Unknown | 0xac
9 | 2017-03-23 18:42:21 | System boot | 46
...
Change-Id: I45fd6058c03f32ff8edccd56ca2aa5359d9b21b1
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/18946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The CR50 TPM can do both SPI and I2C communication. However,
there's situations where policy needs to be applied for CR50
generically regardless of the I/O transport. Therefore add
MAINBOARD_HAS_TPM_CR50 to encompass that. Additionally,
once the mainboard has selected CR50 TPM automatically select
MAINBOARD_HAS_TPM2 since CR50 TPM is TPM 2.0.
Change-Id: I878f9b9dc99cfb0252d6fef7fc020fa3d391fcec
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19370
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
This patch attempts to finish the separation between CONFIG_VBOOT and
CONFIG_CHROMEOS by moving the remaining options and code (including
image generation code for things like FWID and GBB flags, which are
intrinsic to vboot itself) from src/vendorcode/google/chromeos to
src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig
options, and clean up menuconfig visibility for them (i.e. some options
were visible even though they were tied to the hardware while others
were invisible even though it might make sense to change them).
CQ-DEPEND=CL:459088
Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18984
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This callback was only required for a single mainboard, and it can
easily be moved to mainboard-specific code. This patch removes it from
the global namespace and isolates it to the Jecht board. (This makes
it easier to separate vboot and chromeos code in a later patch.)
Change-Id: I9cf67a75a052d1c86eda0393b6a9fbbe255fedf8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18981
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The virtualized developer switch was invented five years ago and has
been used on every vboot system ever since. We shouldn't need to specify
it again and again for every new board. This patch flips the Kconfig
logic around and replaces CONFIG_VIRTUAL_DEV_SWITCH with
CONFIG_PHYSICAL_DEV_SWITCH, so that only a few ancient boards need to
set it and it fits better with CONFIG_PHYSICAL_REC_SWITCH. (Also set the
latter for Lumpy which seems to have been omitted incorrectly, and hide
it from menuconfig since it's a hardware parameter that shouldn't be
configurable.)
Since almost all our developer switches are virtual, it doesn't make
sense for every board to pass a non-existent or non-functional developer
mode switch in the coreboot tables, so let's get rid of that. It's also
dangerously confusing for many boards to define a get_developer_mode()
function that reads an actual pin (often from a debug header) which will
not be honored by coreboot because CONFIG_PHYSICAL_DEV_SWITCH isn't set.
Therefore, this patch removes all those non-functional instances of that
function. In the future, either the board has a physical dev switch and
must define it, or it doesn't and must not.
In a similar sense (and since I'm touching so many board configs
anyway), it's annoying that we have to keep selecting EC_SOFTWARE_SYNC.
Instead, it should just be assumed by default whenever a Chrome EC is
present in the system. This way, it can also still be overridden by
menuconfig.
CQ-DEPEND=CL:459701
Change-Id: If9cbaa7df530580a97f00ef238e3d9a8a86a4a7f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18980
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The correct way to mock out vboot TPM accesses these days is the
CONFIG_VBOOT_MOCK_SECDATA Kconfig option. There are some remnants of
older TPM-mocking infrastructure in our codebase that are as far as I
can tell inert. Remove them.
Change-Id: I3e00c94b71d53676e6c796e0bec0f3db67c78e34
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18977
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
cr50 by default delays nvmem commits internally from the point of
reset to accumulate change state. However, the factory process can
put a board into dev mode through the recovery screen. This state
is stored in the TPM's nvmem space. When the factory process is
complete a disable_dev_request and battery_cutoff_request is performed.
This leads to disabling the dev mode in TPM, but the battery is
subsequently cut off so the nvmem contents never stick. Therefore,
whenever antirollback_write_space_firmware() is called we know there
was a change in secdata so request cr50 to immediately enable nvmem
commits going forward. This allows state changes to happen immediately.
The fallout from this is that when secdata is changed that current
boot will take longer because every transaction that writes to TPM
nvmem space will perform a write synchronously. All subsequent boots
do not have that effect.
It should also be noted that this approach to the implementation is
a pretty severe layering violation. However, the current TPM APIs
don't lend themselves well to extending commands or re-using code
outside of the current routines which inherently assume all knowledge
of every command (in conflict with vendor commands since those are
vendor-specific by definition).
BUG=b:35775104
BRANCH=reef
TEST=Confirmed disablement of dev mode sticks in the presence of:
crossystem disable_dev_request=1; crossystem
battery_cutoff_request=1; reboot;
Change-Id: I3395db9cbdfea45da1f5cb994c6570978593b944
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/18681
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The event log entry indicating developer mode is useful for the
boot path, but is not really useful on the resume path and removing
it makes the event log easier to read when developer mode is enabled.
To make this work I have to use #ifdef around the ACPI code since
this is shared with ARM which does not have acpi.h.
BUG=b:36042662
BRANCH=none
TEST=perform suspend/resume on Eve and check that the event log
does not have an entry for Chrome OS Developer Mode.
Change-Id: I1a9d775d18e794b41c3d701e5211c238a888501a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18665
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This reverts commit 580db7fd9036134b1da4fe7340e306fee4681659.
There's a (parallel) mechanism more closely aligned with how the values
are filled in (fixed device part + version string) that landed from
Chrome OS downstream (see commit 4399b85fdd).
Change-Id: I5ccd06eadabb396452cc9d1d4dff780ea0720523
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18205
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
On Chrome OS devices that use TPM2 parts the platform hierarchy
is disabled by the boot loader, depthcharge. Since the bootloader
isn't involved in resuming a suspended machine there's no equivalent
action in coreboot to disable the platform hierarchy. Therefore, to
ensure consistent state in resume the platform hierarchy in the TPM2
needs to be disabled as well. For systems that resume using the
firmware the platform hierarchy is disabled when utilizing
TPM2 devices.
BUG=chrome-os-partner:61097
BRANCH=reef
TEST=Suspend and resume. Confirmed 'stop trunksd; tpmc getvf; start
trunksd' shows that phEnable is 0.
Change-Id: I060252f338c8fd68389273224ee58caa99881de8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/18096
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Build issues were somehow overlooked in commit
ed840023a84915ece4bc63edffef979926107d55:
1. hexstrtobin is not defined (needs the lib.h);
2. coreboot default compiler doesn't like variable initialization
within for loop.
BUG=chrome-os-partner:60821
TEST=Build and boot lars and reef
Change-Id: Ie52c1f93eee7d739b8aaf59604875f179dff60d0
Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-on: https://review.coreboot.org/18076
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
A VPD entry "wifi_sar" needs to be created which contains a heximal
encoded string in length of 40 bytes. get_wifi_sar_limits() function
retrieves and decodes the data from the VPD entry, which would later
be consumed by platform code.
BUG=chrome-os-partner:60821
TEST=Build and boot lars and reef
Change-Id: I923b58a63dc1f8a7fdd685cf1c618b2fdf4e7061
Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-on: https://review.coreboot.org/17958
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In the factory it's helpful for knowing when a system being
built is meant for release with all the security features
locked down. Provide support for exporting this type of pin
in the acpi tables.
BUG=chrome-os-partner:59951
BRANCH=reef
Change-Id: Iec70249f19fc36e5c9c3a05b1395f84a3bcda9d0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17802
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
BUG=chromium:595715
BRANCH=none
TEST=/build/$board/firmware/coreboot.rom has a zeroed out SHARED_DATA
region if it exists.
Change-Id: Ib1e6fd62bcf987872890c6d155287dcedb0b1f40
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e8a88bf744f44d034f8606a556014e2bee37eda1
Original-Change-Id: I0b59f1f0e2f8645000f83cb3ca7f49e4da726341
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/417821
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://review.coreboot.org/17789
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Chrome OS images have three firmware ID regions, to store version
information for the read-only and the two read-write areas. Fill them
with a suitable default and allow configuring a different scheme.
There's already an override in google/foster and google/rotor to match
the naming scheme used so far (in depthcharge).
BUG=chromium:595715
BRANCH=none
TEST=/build/$board/firmware/coreboot.rom has the expected values in the
regions.
Change-Id: I5fade5971135fa0347d6e13ec72909db83818959
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d2e3be81faa8d21f92325294530714a4b18a1b3e
Original-Change-Id: I2fa2d51eacd832db6864fb67b6481b4d27889f52
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/417320
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://review.coreboot.org/17788
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Instead of defining the same functions for reading/clearing boot-mode
switches from EC in every mainboard, add a common infrastructure to
enable common functions for handling boot-mode switches if
GOOGLE_CHROMEEC is being used.
Only boards that were not moved to this new infrastructure are those
that do not use GOOGLE_CHROMEEC or which rely on some mainboard specific
mechanism for reading boot-mode switches.
BUG=None
BRANCH=None
TEST=abuild compiles all boards successfully with and without ChromeOS
option.
Change-Id: I267aadea9e616464563df04b51a668b877f0d578
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17449
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=chrome-os-partner:59352
BRANCH=None
TEST=Compiles successfully
Change-Id: I87cd675ea45a8b05a178cf64119bf5f9d8d218ca
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17408
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Kconfig hex values don't need to be in quotes, and should start with
'0x'. If the default value isn't set this way, Kconfig will add the
0x to the start, and the entry can be added unnecessarily to the
defconfig since it's "different" than what was set by the default.
A check for this has been added to the Kconfig lint tool.
Change-Id: I86f37340682771700011b6285e4b4af41b7e9968
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16834
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Instead of assuming SPI backing use a region_device to
abstract away the underlying storage mechanism.
BUG=chrome-os-partner:55932
Change-Id: I6b0f5a7e9bea8833fb1bca87e02abefab63acec3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16204
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
CONFIG_VBOOT was recently moved to be independent from CONFIG_CHROMEOS.
However, the latter still has some 'select' clauses to ensure that
required TPM libraries are built. The TPM is an essential part of vboot,
and without these libraries the vboot code cannot compile... therefore,
they should be moved under CONFIG_VBOOT.
Change-Id: I0145558e5127c65c6a82d62f25b5a39e24cb8726
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16229
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This option is no longer used in the code base. Remove it.
BUG=chrome-os-partner:56151
Change-Id: Ia73cce7546c9839518c9e931b03c50856abc2018
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16186
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch enables the CHROMEOS_RAMOOPS_NON_APCI Kconfig option as a
default across all non-x86 Chrome OS boards.
CQ-DEPEND=CL:367905
BRANCH=None
BUG=None
TEST=See depthcharge CL.
Change-Id: If14ef4f9b1bd480f2d52df3892c73059bb9b07d5
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 8c3b74fb21aadd6de7af62f32fa98fc211d75085
Original-Change-Id: I16ff7f68762a995cd38e5fddaf6971d4b9f07e21
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/368010
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16154
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The elog.c file had stale includes no longer needed. Remove them.
BUG=chrome-os-partner:55932
Change-Id: I891a57d08281c3c56e9d35489d6dea6c47eaa27b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16085
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This replaces all occurrences of a hardcoded vboot path to the
VBOOT_SOURCE variable, that may be overridden from the command line,
witch fallback to the source from 3rdparty.
Change-Id: Ia57d498d38719cc71e17060b76b0162c4ab363ed
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15825
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Use the ACPI generator for creating the Chrome OS gpio
package. Each mainboard has its own list of Chrome OS
gpios that are fed into a helper to generate the ACPI
external OIPG package. Additionally, the common
chromeos.asl is now conditionally included based on
CONFIG_CHROMEOS.
Change-Id: I1d3d951964374a9d43521879d4c265fa513920d2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15909
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
BUG=chrome-os-partner:55639
Change-Id: I40a28f921499ddf43d8b423f5192ac93b40254c1
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15903
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
1. Currenty, boot reason is being added to elog only for some
ARM32/ARM64 platforms. Change this so that boot reason is logged by
default in elog for all devices which have CHROMEOS selected.
2. Add a new option to select ELOG_WATCHDOG_RESET for the devices that
want to add details about watchdog reset in elog. This requires a
special region WATCHDOG to be present in the memlayout.
3. Remove calls to elog add boot reason and watchdog reset from
mainboards.
BUG=chrome-os-partner:55639
Change-Id: I91ff5b158cfd2a0749e7fefc498d8659f7e6aa91
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15897
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:55639
Change-Id: I3ac2b256862758bb5c9e6c2f1311972af474e8f6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15870
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
With VBOOT_VERIFY_FIRMWARE separated from CHROMEOS, move recovery and
developer mode check functions to vboot. Thus, get rid of the
BOOTMODE_STRAPS option which controlled these functions under src/lib.
BUG=chrome-os-partner:55639
Change-Id: Ia2571026ce8976856add01095cc6be415d2be22e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15868
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
VBOOT_VERIFY_FIRMWARE should be independent of CHROMEOS. This allows use
of verified boot library without having to stick to CHROMEOS.
BUG=chrome-os-partner:55639
Change-Id: Ia2c328712caedd230ab295b8a613e3c1ed1532d9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15867
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This renames the VB_SOURCE variable to VBOOT_SOURCE in the build system,
providing increased clarity about what it represents.
Since the submodule itself is called "vboot", it makes sense to use that
name in full instead of a very shortened (and confusing) version of it.
Change-Id: Ib343b6642363665ec1205134832498a59b7c4a26
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15824
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
On some x86 platforms (skylake, apollolake), we observe reboots at
different steps during the FSP initialization. These additional reboots
result in loss of recovery request because vboot_reference library
clears recovery request on vbnv once verification is complete and it has
made a decision about which boot path to take(normal/dev, slot-a/slot-b,
recovery).
Provide a way to allow mainboards/chipsets to inform recovery module in
vboot2 to save recovery reason to survive unexpected reboots. The
recovery reason is set in vbnv after vboot_reference library completes
its verification and clears the reason in vbnv while jumping to
payload.
BUG=chrome-os-partner:55431
Change-Id: Ie96be9aeb42c8209d8215943409e6327d6a8bf98
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15802
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add recovery module in vboot2 that checks if a recovery request is
pending and returns appropriate reason code:
1. Checks if recovery mode is initiated by EC.
2. Checks if recovery request is present in VBNV.
3. Checks if recovery request is present in handoff for post-cbmem
stages.
4. Checks if vboot verification is complete and looks up selected region
to identify if recovery is requested by vboot library.
BUG=chrome-os-partner:55431
Change-Id: I31e332a4d014a185df2434c3730954e08dc27281
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15800
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
1. Remove unused functions/structures.
2. Add checks for NULL return values.
3. Change prefixes to vb2 instead of vboot for functions used internally
within vboot2/
4. Get rid of vboot_handoff.h file and move the structure definition to
vboot_common.h
5. Rename all functions using handoff structure to have prefix
vboot_handoff_*. All the handoff functions can be run _only_ after cbmem
is online.
6. Organize vboot_common.h content according to different
functionalities.
BUG=chrome-os-partner:55431
Change-Id: I4c07d50327d88cddbdfbb0b6f82c264e2b8620eb
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15799
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This fills up the RO_FRID, RW_FWID_A and RW_FWID_B FMAP sections with
the relevant version from KERNELVERSION, padded to the right size and
gap-filled with zeros.
Change-Id: I45c724555f8e41be02b92ef2990bf6710be805c2
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15604
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
TPM1.2 is using the somewhat misnamed tlcl_set_global_lock() command
function to lock the hardware rollback counter. For TPM2 let's
implement and use the TPM2 command to lock an NV Ram location
(TPM2_NV_WriteLock).
BRANCH=none
BUG=chrome-os-partner:50645
TEST=verified that TPM2_NV_WriteLock command is invoked before RO
firmware starts RW, and succeeds.
Change-Id: I52aa8db95b908488ec4cf0843afeb6310dc7f38b
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 2f859335dfccfeea900f15bbb8c6cb3fd5ec8c77
Original-Change-Id: I62f22b9991522d4309cccc44180a5ebd4dca488d
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/358097
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Darren Krahn <dkrahn@chromium.org>
Reviewed-on: https://review.coreboot.org/15638
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
tlcl_force_clear() needs to be issued each time when the device mode
switches between normal/development/recovery.
This patch adds command implementation using TPM_Clear TPM2 command,
and also invokes it before factory initialization.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=verified that TPM_Clear command succeeds at factory startup and
the boot proceeds normally.
Change-Id: Ia431390870cbe448bc1b6f1755ed17953be9bdf1
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 347ff17b97da45fa4df547ff32f9dd2c8972cefd
Original-Change-Id: I2a0e62527ad46f9dd060afe5e75c7e4d56752849
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/358095
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Darren Krahn <dkrahn@chromium.org>
Reviewed-on: https://review.coreboot.org/15636
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
The TPM2 specification allows defining NV ram spaces in a manner
that makes it impossible to remove the space until a certain PCR is in
a certain state.
This comes in handy when defining spaces for rollback counters: make
their removal depend on PCR0 being in the default state. Then extend
PCR0 to any value. This guarantees that the spaces can not be deleted.
Also, there is no need t create firmware and kernel rollback spaces
with different privileges: they both can be created with the same set of
properties, the firmware space could be locked by the RO firmware, and
the kernel space could be locked by the RW firmware thus providing
necessary privilege levels.
BRANCH=none
BUG=chrome-os-partner:50645, chrome-os-partner:55063
TEST=with the rest of the patches applied it is possible to boot into
Chrome OS maintaining two rollback counter spaces in the TPM NV
ram locked at different phases of the boot process.
Change-Id: I889b2c4c4831ae01c093f33c09b4d98a11d758da
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 36317f5e85107b1b2e732a5bb2a38295120560cd
Original-Change-Id: I69e5ada65a5f15a8c04be9def92a8e1f4b753d9a
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/358094
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15635
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
This patch adds a TPM2 specific path in the vboot2 initialization
sequence when the device is turned on in the factory for the first
time, namely two secure NVRAM spaces are created, with different
access privileges.
The higher privilege space can be modified only be the RO firmware,
and the lower privilege space can be modified by both RO and RW
firmware.
The API is being modified to hide the TPM implementation details from
the caller.
Some functions previously exported as global are in fact not used
anywhere else, they are being defined static.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=when this code is enabled the two secure spaces are successfully
created during factory initialization.
Original-Commit-Id: 5f082d6a9b095c3efc283b7a49eac9b4f2bcb6ec
Original-Change-Id: I917b2f74dfdbd214d7f651ce3d4b80f4a18def20
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/353916
Original-Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Original-Reviewed-by: Darren Krahn <dkrahn@chromium.org>
squashed:
mock tpm: drop unused functions
safe_write() and safe_define_space() functions are defined in
secdata_mock.c, but not used in mocked TPM mode.
The actual functions have been redefined as static recently and their
declarations were removed from src/include/antirollback.h, which now
causes compilation problems when CONFIG_VBOOT2_MOCK_SECDATA is
defined.
Dropping the functions from secdata_mock.c solves the problem.
BRANCH=none
BUG=none
TEST=compilation in mock secdata mode does not fail any more.
Original-Commit-Id: c6d7824f52534ecd3b02172cb9078f03e318cb2b
Original-Change-Id: Ia781ce99630d759469d2bded40952ed21830e611
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/356291
Original-Tested-by: Caesar Wang <wxt@rock-chips.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Change-Id: Icb686c5f9129067eb4bb3ea10bbb85a075b29955
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/15571
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
If read_vbnv finds that the vbnv_copy is not valid, it initializes it
with the correct HEADER_SIGNATURE and other attributes. However, the
vbnv copy is checked for validity and initialized at the vboot layer as
well. Since, vboot is the owner of this data, it should be the one
initializing it. Thus, if read_vbnv sees that the data is not valid,
simply reset it to all 0s and let vboot layer take care of it. This also
removes the need for additional checks to ensure that the dirty vbnv
copy is properly updated on storage.
Change-Id: I6101ac41f31f720a6e357c9c56e571d62e0f2f47
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15498
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Currently, read_vbnv performs a reset of the vbnv cache if it is not
valid. However, this information is not passed up to the vboot layer,
thus resulting in missed write-back of vbnv cache to storage if vboot
does not update the cache itself.
Update read_vbnv to return a value depending upon whether it wants a
write-back to be performed when save is called.
Return value:
0 = No write-back required
1 = Write-back of VBNV cache is required.
Change-Id: I239939d5f9731d89a9d53fe662321b93fc1ab113
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15457
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Until now it was assumed that all TPM devices were of the same type
(TCG 1.2 spec compliant) and x86 based boards had LPC connected TPMs
and all other boards had I2C connected TPMs.
With the advent of TPM2 specification there is a need to be able to
configure different combinations of TPM types (TPM or TPM2) and
interfaces (LPC, I2C and SPI).
This patch allows to do it. Picking Chrome OS still assumes that the
board has a TPM device, but adding MAINBOARD_HAS_TPM2 to the board's
Kconfig will trigger including of TPM2 instead.
MAINBOARD_HAS_LPC_TPM forces the interface to be set to LPC, adding
SPI_TPM to the board config switches interface choice to SPI, and if
neither of the two is defined, the interface is assumed to be I2C.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=verified that none of the generated board configurations change
as a result of this patch. With the rest of the stack in place it
is possible to configure different combinations of TPM types and
interfaces for ARM and x86 boards.
Change-Id: I24f2e3ee63636566bf2a867c51ed80a622672f07
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 5a25c1070560cd2734519f87dfbf401c135088d1
Original-Change-Id: I659e9301a4a4fe065ca6537ef1fa824a08d36321
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/349850
Original-Reviewed-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/15294
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
The VBOOT_OPROM_MATTERS configuration option signals to vboot that the
board can skip display initialization in the normal boot path. It's name
is a left-over from a time when this could only happen by avoiding
loading the VGA option ROM on x86 devices. Now we have other
boards that can skip their native display initialization paths too, and
the effect to vboot is the same. (Really, we should rename oprom_matters
and oprom_loaded to display_skippable and display_initialized or
something, but I don't think that's worth the amount of repositories
this would need to touch.)
The only effect this still has in today's vboot is to reboot and
explicitly request display initialization for EC software sync on
VBOOT_EC_SLOW_UPDATE devices (which we haven't had yet on ARM). Still,
the vboot flag just declares the capability (for skipping display init),
and it should be set correctly regardless of whether that actually makes
a difference on a given platform (right now). This patch updates all
boards/SoCs that have a conditional path based on
display_init_required() accordingly.
BRANCH=None
BUG=chrome-os-partner:51145
TEST=Booted Oak, confirmed that there's no notable boot time impact.
Change-Id: Ic7c77dbd8356d67af7aee54e7869f9ac35241b99
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 9c242f7
Original-Change-Id: I75e5cdda2ba2d111ea50ed2c7cdf94322679f1cd
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/348786
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15113
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
When the vboot cbfs selection runs in postcar stage it should be
utilizing cbmem to locate the vboot selected region.
Change-Id: I027ba19438468bd690d74ae55007393f051fde42
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14959
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add cmos init helper function.
This function saves the Vboot NV data, calls cmos init
and restores the Vboot NV data.
Change-Id: I8475f23d849fb5b5a2d16738b4d5e99f112883da
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/14898
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Using a dedicated variable is slightly less readable and makes the code
less consistent, given that other test functions are called directly in
the if statements.
Change-Id: If52b2a4268acb1e2187574d15cc73a0c1d5fe9bb
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/14817
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
On modern x86 platforms like apollolake, pre-RAM stages verstage and
romstage run within the cache-as-ram region. Thus, we do not need to
pass in the --xip parameter to cbfstool while adding these
stages. Introduce a new Kconfig variable NO_XIP_EARLY_STAGES which is
default false for all x86 platforms. Apollolake selects this option
since it supports code execution with CAR.
Change-Id: I2848046472f40f09ce7fc230c258b0389851b2ea
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14623
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
In the case where one of the FW_MAIN regions is empty, the last file
(empty) will also appear to be first and have a zero offset, making head
complain.
This is a very borderline use case, since the FW_MAIN_ regions should
have been filled previously, but an extra check doesn't hurt.
Change-Id: I15491c5b4a5e7d1f9fb369cc5fa4e3875e2dad3b
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/14472
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ide3202fca75c77ccebf17d61d93945ba7834a13b
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14398
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The codepath was untested and incomplete. It now determines the right
GBB region sizes and puts the data in.
BUG=chromium:595715
BRANCH=none
TEST=none
Change-Id: I2cc47ddd8aa7675375ca5ed5f75632c30c65dd1e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 36e026404ed049d61b677ef043a781c8c209dd93
Original-Change-Id: Ib872627740dbd8ac19fc3e2a01464457f38366ed
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/336358
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14239
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This mirrors vboot's flag table.
BUG=chromium:595715
BRANCH=none
TEST=none
Change-Id: I4473eb6c0e073f555e6a692a447e8cc85f8e4eeb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0fc50a6cff5ba900e6407d58a8f18db63b5946a5
Original-Change-Id: Ieabd3f9391ba256557e18386f334558d64a81694
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/336630
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14238
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The MT8173 hardware watchdog can assert an external signal which we use
to reset the TPM on Oak. Therefore we do not need to do the same
double-reset dance as on other Chromebooks to ensure that we reset in a
correct state.
Still, we have a situation where we need to reconfigure the watchdog
early in the bootblock in a way that will clear information about the
previous reboot from the status register, and we need that information
later in ramstage to log the right event. Let's reuse the same watchdog
tombstone mechanism from other boards, except that we don't perform a
second reset and the tombstone is simply used to communicate between
bootblock and ramstage within the same boot.
BRANCH=None
BUG=None
TEST=Run 'mem w 0x10007004 0x8' on Oak, observe how it reboots and how
'mosys eventlog list' shows a hardware watchdog reboot event afterwards.
Change-Id: I1ade018eba652af91814fdaec233b9920f2df01f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 07af37e11499e86e730f7581862e8f0d67a04218
Original-Change-Id: I0b9c6b83b20d6e1362d650ac2ee49fff45b29767
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/334449
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14234
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
When doing verification of memory init code in verstage vboot
should issue a TPM_Startup(ST_STATE) instead of TPM_Startup(ST_CLEAR)
in order to preserve the flags in TPM_STCLEAR_FLAGS which include
things like physical presence. In doing so we can also skip the rest
of the TPM init work in this function in the S3 resume path.
BUG=chrome-os-partner:50633
BRANCH=glados
TEST=S3 resume on chell and ensure TPM is resumed instead of being
cleared and that 'tpmc getvf|getpf|getf' does not show any difference
in flags between boot and resume.
Change-Id: I7a48eaf7f57d2bc6ebc182178cbe60ceb2ad8863
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f059f39a0f5c2f21e564b9554efacf26a41ad794
Original-Change-Id: I647869202d2f04328764155d3de4cad9edf10ae4
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Previous-Reviewed-on: https://chromium-review.googlesource.com/332434
Original-(cherry picked from commit 5fc7792e4104523569140cd84ce313da721ec34b)
Original-Reviewed-on: https://chromium-review.googlesource.com/332542
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14107
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
In ChromeOS VPD spec the right name is "region".
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/322851
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: mukesh agrawal <quiche@chromium.org>
(cherry picked from commit 21ea0663e7f3ffe3aaea6b6ce0e1216fcd9ca23e)
BUG=chrome-os-partner:50516
BRANCH=glados
TEST=build and boot on chell
Change-Id: I4ba9a9c65af3732fa263030640495ab5bea91d1f
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 848f18e731eb11dd3037d12607d7364f95e64e34
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Change-Id: Ib96036f9cd76449f170af5c3dd6ef6e8e91ded94
Original-Reviewed-on: https://chromium-review.googlesource.com/329293
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13837
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
If a platform does verification of the memory init step, and it must
resume with the same slot that it booted from then it needs to set
the vboot context flag when resuming instead of booting. This will
affect the slot that is selected to verify and resume from.
BUG=chromium:577269
BRANCH=glados
TEST=manually tested on chell:
1) ensure that booting from slot A resumes from slot A.
2) ensure that booting from slot B resumes from slot B.
3) do RW update while booted from slot A (so the flags are set to try
slot B) and ensure that suspend/resume still functions properly using
current slot A.
4) do RW update while booted from slot B (so the flags are set to try
slot A) and ensure that suspend/resume still functions properly using
current slot B.
Change-Id: I77e6320e36b4d2cbc308cfb39f0d4999e3497be3
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 4c84af7eae7b2a52a28cc3ef8a80649301215a68
Original-Change-Id: I395e5abaccd6f578111f242d1e85e28dced469ea
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/328775
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13834
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch ports the LZ4 decompression code that debuted in libpayload
last year to coreboot for use in CBFS stages (upgrading the base
algorithm to LZ4's dev branch to access the new in-place decompression
checks). This is especially useful for pre-RAM stages in constrained
SRAM-based systems, which previously could not be compressed due to
the size requirements of the LZMA scratchpad and bounce buffer. The
LZ4 algorithm offers a very lean decompressor function and in-place
decompression support to achieve roughly the same boot speed gains
(trading compression ratio for decompression time) with nearly no
memory overhead.
For now we only activate it for the stages that had previously not been
compressed at all on non-XIP (read: non-x86) boards. In the future we
may also consider replacing LZMA completely for certain boards, since
which algorithm wins out on boot speed depends on board-specific
parameters (architecture, processor speed, SPI transfer rate, etc.).
BRANCH=None
BUG=None
TEST=Built and booted Oak, Jerry, Nyan and Falco. Measured boot time on
Oak to be about ~20ms faster (cutting load times for affected stages
almost in half).
Change-Id: Iec256c0e6d585d1b69985461939884a54e3ab900
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13638
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This symbol is not defined.
Change-Id: I2b0a3fca82d85962fc882f237b70702cab0400db
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/13647
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
See discussion on https://review.coreboot.org/13600 and
https://review.coreboot.org/13601
Change-Id: Ia8274b0b296d6b398f75c0d91a6fded4c5f57e10
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13643
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
These files aren't updated (or updatable), and as such don't need to be
copied to the RW sections.
Change-Id: Ie78936792ad651fbf8500fc7e34f0899e33a904c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13633
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds a new kconfig option that will back up the VBNV data
from CMOS to flash, and restore it if the CMOS data is invalid
during boot.
This allows special flags to not get lost when power is lost,
RTC reset is triggered, or CMOS is corrupted.
BUG=chrome-os-partner:47915
BRANCH=glados
TEST=manually tested on chell:
1-boot and run "enable_dev_usb_boot"
2-reboot and check that it is enabled with crossystem
3-run "mosys nvram clear"
4-reboot and check that it is still enabled
Change-Id: I38103d100117da34471734a6dd31eb7058735c12
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8a356e616c6885d5ae3b776691929675d48a28f9
Original-Change-Id: I06e7ddff7b272e579c704914a0cf8cc14d6994e8
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324122
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13600
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Certain platforms query the recovery mode switch more than just within
vboot during the boot flow. Therefore, it's important that the first call to
get_recovery_mode_switch() is consistent through memory training because
certain platforms use the recovery mode switch to take different action
for memory training. Therefore, defer the clearing of the rec mode
switch to a place when it's known that memory is up and online.
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=Three finger salute is honored on chell by retraining memory.
Change-Id: I26ea51de7ffa2fe75b9ef1401fe92f9aec2b4567
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6b0de9369242e50c7ff3b164cf1ced0642c7b087
Original-Change-Id: Ia7709c7346d1222e314bf3ac7e4335a63e9a5144
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/325120
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13604
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This modifies the vbnv_flash driver to make it safe for use
in cache-as-ram by handling the global variables safely.
To make this cleaner all of the variables were moved into
one structure and referenced from there.
BUG=chrome-os-partner:47915
BRANCH=glados
TEST=build and boot on chell using following patches to
test backup and restore of vbnv_cmos into flash
Change-Id: I3a17fa51cfd754455502ac2e5f181dae35967f2a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 48876561fa4fb61e1ec8f92596c5610d97135201
Original-Change-Id: Id9fda8467edcc55e5ed760ddab197ab97d1f3d25
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324121
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13599
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The VBNV region size is determined by vboot and is not really
configurable. Only the CMOS implementation defined this config
variable so switch it to use VBNV_BLOCK_SIZE defined by vboot
in vbnv_layout.h instead.
This requires updating the broadwell/skylake cmos reset functions
to use the right constant.
BUG=chrome-os-partner:47915
BRANCH=glados
TEST=manually tested on chell
Change-Id: I45e3efc2a22efcb1470bbbefbdae4eda33fc6c96
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e2b803ff3ac30ab22d65d1e62aca623730999a1d
Original-Change-Id: I4896a1a5b7889d77ad00c4c8f285d184c4218e17
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324520
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13598
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add a wrapper around the vbnv implementations and call into the different
backend functions from there. Also move some of the common functions to
the common code and simplify the backend drivers. This will allow some
of the code to be re-used so the CMOS backend can backup the data into
the flash backend.
One side effect of this is that the cache of VBNV was removed from CMOS
and EC backends and moved into the VBNV wrapper, but the flash backend
also still has a separate cache because it has more state and complexity
in the implementation. The wrapper cached data is not used for normal
vbnv_read/vbnv_write because some callers need the ability to force a
write if the backend storage is cleared (i.e. CMOS clear).
BUG=chrome-os-partner:47915
BRANCH=glados
TEST=build and boot on chell
Change-Id: I4d2e0e99af7e8a44aec77ad9991507401babcca6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c30f60434a64f6c0eb9ede45d48ddafff19dd24f
Original-Change-Id: Ia97f6607c5ad837b9aa10b45211137221ccb93a0
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324120
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13597
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Vboot keeps track of the size of the hashed region in each
RW slot. While that size was being used to calculate the hash
it wasn't being honored in restricting the access within the
FMAP region for that RW slot. To alleviate that create a sub
region that covers the hashed data for the region in which
we boot from while performing CBFS accesses.
BUG=chrome-os-partner:49764
BUG=chromium:445938
BRANCH=glados
TEST=Built and booted chell with cbfstool and dev-util patches.
Change-Id: I1a4f45573a6eb8d53a63bc4b2453592664c4f78b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4ac9e84af5b632e5735736d505bb2ca6dba4ce28
Original-Change-Id: Idca946926f5cfd2c87c4a740ad2108010b6b6973
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324093
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13586
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When vboot_handoff_flag() is called in the bootblock or a separate
verstage there's no memory nor the possibility of dram coming online.
Therefore, don't bother to attempt call cbmem_find().
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=Built chell with separate verstage which pulls in vboot_common.c
dependency. No more linking errors w/ cbmem_find() not being
around.
Change-Id: I494c93adc1c00459fdfaa8ce535c6b4c884ed0fb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 414ce6aeaff657dc90289b25e5c883562189b154
Original-Change-Id: I8a5f2d154026ce794a70e7ec38883fa3c28fb6e7
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324070
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13580
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Sometimes it's necessary for the platform to perform clean up
tasks prior to reboot when employing vboot. For example, x86 systems
that resume and do vboot verification may need to clear their
sleep control register prior to doing a cold reset so that the
next boot doesn't appear to be a resume. Allow that hook by
introducing vboot_platform_prepare_reboot().
BUG=chrome-os-partner:46049
BRANCH=glados
TEST=Ensure vboot_platform_prepare_reboot() called from vboot_reboot().
Change-Id: I622c9181d9fa3048204e3df3223d5dd4b458abca
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f31ffc40bde002dec398fd4dd9d2ee9d65df0d7b
Original-Change-Id: I97318cec34494a7fc4b1ecf2cb22715d20e730ff
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/323501
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13575
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
For x86 systems which resume through the reset vector one needs to
ensure the the RW slot taken at resume time matches the one at
boot time. The reason is that any assets pulled out of the boot
media need to match how the platform previously booted. To do
that one needs obtain the hash digest of the chosen slot, and it
needs to be saved in a secure place on the normal boot path. On
resume one needs to retrieve the hash digest back to compare it
with the chosen slot. If they don't match resuming won't be
possible.
BUG=chrome-os-partner:46049
BRANCH=glados
TEST=Suspended and resumed on chell. Also, tested with an EC build
which returns a bad hash to ensure that is properly caught.
CQ-DEPEND=CL:323460
Change-Id: I90ce26813b67f46913aa4026b42d9490a564bb6c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 01a42c0ecfc6d60d1d2e5e36a86781d91d5c47a9
Original-Change-Id: I6c6bdce7e06712bc06cc620a3d7a6a6250c59c95
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/323500
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13574
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This requires payload integration somewhere to be useful, because
without that, adding it will (hopefully) break the signature.
Change-Id: I67b8267e5040e26353df02d258e92a0610e19a52
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13560
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Use the flags to preset the GBB flags field. The Kconfig defaults are
chosen for a "developer" configuration.
Change-Id: Ifcc05aab10b92a2fc201b663df5ea47f92439a3f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13559
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The GBB contains hardware-specific data plus some configuration. The
latter isn't supported by this change yet and will come later.
The fields that are supported (hardware ID, bmpfv, vboot keys) are
configurable through Kconfig and point to Chrome OS-style default (eg.
developer keys).
While adding vboot keys, the two keys used to sign RW regions are also
added to Kconfig, even if not yet used.
Change-Id: Icfba6061ca83182df560cd36052fbb257826d4b0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13558
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Just rename the two scripts that are in the src/ tree to give them
a .sh extension. Since we generally expect files in the src directory
to be source files, this allows to identify these as scripts easily.
Change-Id: I0ab20a083880370164488d37a752ba2d5a192fdc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13432
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch adds a check to the VPD parsing code to avoid reading the
whole thing if the first byte ('type' of the first VPD entry) is 0x00
or 0xff. These values match the TERMINATOR and IMPLICIT_TERMINATOR types
which should never occur as the first entry, so this usually means that
the VPD FMAP section has simply never been initialized correctly. This
early abort avoids wasting time to read the whole section from SPI flash
(which we'd otherwise have to since we're not going to find a Google VPD
2.0 header either).
BRANCH=None
BUG=None
TEST=Booted Oak, confirmed that VPD read times dropped from 100ms to
1.5ms.
Change-Id: I9fc473e06440aef4e1023238fb9e53d45097ee9d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 20a726237e03941ad626a6146700170a45ee7720
Original-Change-Id: I09bfec3c24d24214fa4e9180878b58d00454f399
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/322897
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/13467
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch adds three timestamps to coreboot and the cbmem utility that
track the time required to read in the Chrome OS Vital Product Data
(VPD) blocks (RO and RW). It's useful to account for these like all
other large flash accesses, since their size is variable.
BRANCH=None
BUG=None
TEST=Booted Oak, found my weird 100ms gap at the start of ramstage
properly accounted for.
Change-Id: I2024ed4f7d5e5ae81df9ab5293547cb5a10ff5e0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b97288b5ac67ada56e2ee7b181b28341d54b7234
Original-Change-Id: Ie69c1a4ddb6bd3f1094b3880201d53f1b5373aef
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/322831
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/13139
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add flag handling for CONFIG_VBOOT_EC_SLOW_UPDATE to indicate
to vboot that it should show the "critical update" screen during
software sync for EC+PD.
In order to make this work on x86 where we do not run graphics
init in the normal path add handling for CONFIG_VBOOT_OPROM_MATTERS
and indicate to vboot when the option rom has been loaded.
BUG=chrome-os-partner:49560
BRANCH=glados
TEST=Build and boot on chell in normal mode with an EC update payload
and ensure that it reboots to enable graphics, shows the "critical
update" screen, and then reboots to disable graphics init again.
Change-Id: I5ca46457798a22e9b08aa2febfec05b01aa788f9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6a1bb8572c3485f64b9f3e759288321b44184e66
Original-Change-Id: I9f66caaac57bb9f05bc6c405814469ef7ddf4d0a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/322781
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13073
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Setup an initial rule to make use of the updatable CBFS regions in fmap.
Change-Id: I1fe1c6e7574854b735760c85590da6e297f6e687
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13060
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Implement wifi_regulatory_domain function by getting country code from
VPD
Original-Reviewed-on: https://chromium-review.googlesource.com/314385
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Hannah Williams <hannah.williams@intel.com>
Change-Id: Ia6a24df110a3860d404d345571007ae8965e9564
Signed-off-by: fdurairx <felixx.durairaj@intel.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/12743
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
CB used to clear recovery status towards romstage end after FSP
memory init. Later inside FSP silicon init due to HSIO CRC mismatch
it will request for an additional reset.On next boot system resume
in dev mode rather than recovery because lost its original state
due to FSP silicon init reset.
Hence an additional 1 reset require to identify original state.
With this patch, we will get future platform reset info during romstage
and restore back recovery request flag so, in next boot CB can maintain
its original status and avoid 1 extra reboot.
BUG=chrome-os-partner:43517
BRANCH=none
TEST= build and booted Kunimitsu and tested RO mode
Change-Id: Ibf86ff2b140cd9ad259eb39987d78177535cd975
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 40ddc21a97b318510116b7d5c4314380778a40f7
Original-Change-Id: Ia52835f87ef580317e91931aee5dd0119dea8111
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/302257
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12975
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Provide a common routine to hash the contents of a cbfs
region. The cbfs region is hashed in the following order:
1. potential cbfs header at offset 0
2. potential cbfs header retlative offset at cbfs size - 4
3. For each file the metadata of the file.
4. For each non-empty file the data of the file.
BUG=chrome-os-partner:48412
BUG=chromium:445938
BRANCH=None
TEST=Utilized in chromeos cros_bundle_firmware as well as at
runtime during vboot verification on glados.
Change-Id: Ie1e5db5b8a80d9465e88d3f69f5367d887bdf73f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12786
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
This file became obsolete when FMAP code moved to src/lib/ and is no
longer built by any Makefile. Let's remove it to avoid confusing people.
Change-Id: I55639af28f9f3d4c4cb0429b805e3f120ecc374e
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12753
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Now that only CBFS access is supported for finding resources
within the boot media the assets infrastructure can be removed.
Remove it.
BUG=chromium:445938
BRANCH=None
TEST=Built and ran on glados.
Change-Id: I383fd6579280cf9cfe5a18c2851baf74cad004e9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12690
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The Chrome OS verified boot path supported multiple CBFS
instances in the boot media as well as stand-alone assets
sitting in each vboot RW slot. Remove the support for the
stand-alone assets and always use CBFS accesses as the
way to retrieve data.
This is implemented by adding a cbfs_locator object which
is queried for locating the current CBFS. Additionally, it
is also signalled prior to when a program is about to be
loaded by coreboot for the subsequent stage/payload. This
provides the same opportunity as previous for vboot to
hook in and perform its logic.
BUG=chromium:445938
BRANCH=None
TEST=Built and ran on glados.
CQ-DEPEND=CL:307121,CL:31691,CL:31690
Change-Id: I6a3a15feb6edd355d6ec252c36b6f7885b383099
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12689
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
ELOG requires SPI_FLASH, so don't bother selecting if if SPI_FLASH isn't
available.
Change-Id: I080ac47e74aba820c94409d4913647abee215076
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12661
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
verstage, romstage, and payload can be added through infrastructure now.
Change-Id: Ib9e612ae35fb8c0230175f5b8bca1b129f366f4b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12549
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Put dependecies on CHROMEOS's selection of the Kconfig symbols
TPM_INIT_FAILURE_IS_FATAL and SKIP_TPM_STARTUP_ON_NORMAL_BOOT to match
the dependencies on those symbols where they are defined in
src/drivers/pc80/tpm/Kconfig
The file that uses these only gets built in if CONFIG_LPC_TPM is
selected selected.
The warnings were:
warning: (CHROMEOS) selects TPM_INIT_FAILURE_IS_FATAL which has unmet
direct dependencies (PC80_SYSTEM && LPC_TPM)
warning: (CHROMEOS) selects SKIP_TPM_STARTUP_ON_NORMAL_BOOT which has
unmet direct dependencies (PC80_SYSTEM && LPC_TPM)
Change-Id: I7af00c79050bf511758bf29e3d57f6ff34d2a296
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12497
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There are few drawbacks reading VPD from SPI flash in user land, including
"lack of firmware level authority" and "slow reading speed".
Since for many platforms we are already reading VPD in firmware (for
example MAC and serial number), caching the VPD data in CBMEM should
will speed up and simplify user land VPD processing without adding
performance cost.
A new CBMEM ID is added: CBMEM_ID_VPD, referring to a structure containing
raw Google VPD 2.0 structure and can be found by the new LB_TAG_VPD in
Coreboot tables.
BRANCH=smaug
BUG=chrome-os-partner:39945
TEST=emerge-smaug coreboot chromeos-bootimage # and boots successfully.
[pg: lots of changes to make it work with what happened in upstream
since 2013]
Change-Id: If8629ac002d52abed7b480d3d06298665613edbf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 117a9e88912860a22d250ff0e53a7d40237ddd45
Original-Change-Id: Ic79f424a6e3edfb6c5d168b9661d61a56fab295f
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/285031
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12453
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
While migrating from vboot1 to vboot2, the tpm_init was moved out of
vboot library and implemented in coreboot. However, while doing this,
the initial factory flow was missed.
We need to ensure following flow for tpm_init:
1. Perform tpm_init
2. If tpm_init fails, set secdata_context flag to indicate to vboot
that tpm needs reboot.
3. Call vb2_api_phase1
4. If vb2_api_phase1 returns error code saying boot into recovery,
continue booting into recovery. For all other error codes, save
context if required and reboot.
[pg: everything but step 2 was already done, so this upstream commit is
quite minimal]
CQ-DEPEND=CL:300572
BUG=chrome-os-partner:45462
BRANCH=None
TEST=Verified behavior on smaug. Steps to test:
1. Reboot into recovery
2. tpmc clear
3. Reboot device
Expected Behavior: Device should reboot after Enabling TPM. Should not
enter recovery
Confirmed that the device behaves as expected.
Change-Id: I72f08d583b744bd77accadd06958c61ade298dfb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 85ac93137f3cfb28668dcfa18dfc773bf910d44e
Original-Change-Id: I38ab9b9d6c2a718ccc8641377508ffc93fef2ba1
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/300570
Original-Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12205
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
vboot handoff should look at flags in struct vb2_shared_data when
translating flags to VBSD_BOOT_REC_SWITCH_ON because
VBSD_BOOT_REC_SWITCH_ON is supposed to indicate whether manual recovery was
triggered or not while vb2_sd->recovery_reason will be able to provide
that information only in some cases after CL:307586 is checked in.
For example, this fixes a recovery loop problem: Without this fix,
vb2_sd->recovery_reason won't be set to VB2_RECOVERY_RO_MANUAL when user
hits esc+refresh+power at 'broken' screen. In the next boot,
recovery_reason will be set to whatever reason which caused 'broken'
screen. So, if we check recovery_reason == VB2_RECOVERY_RO_MANUAL, we
won't set vb_sd->flags to VBSD_BOOT_REC_SWITCH_ON. That'll cause a
recovery loop because VbBootRecovery traps us again in the 'broken'
screen after not seeing VBSD_BOOT_REC_SWITCH_ON.
BUG=chromium:501060
BRANCH=tot
TEST=test_that -b veyron_jerry suite:faft_bios
Change-Id: I69a50c71d93ab311c1f7d4cfcd7d454ca1189586
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d9679b02f6d21ed903bb02e107badb0fbf7da46c
Original-Change-Id: I3da642ff2d05c097d10db303fc8ab3358e10a5c7
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/307946
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: http://review.coreboot.org/12199
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We need to special-case filling out the vboot structures when
we use CBFS instead of vboot's custom indexed format, otherwise
(due to the way the CBFS header looks), it will try to write several
million entries.
Change-Id: Ie1289d4a19060bac48089ff70e5cfc04a2de373f
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11914
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
To support x86 verstage one needs a working buffer for
vboot. That buffer resides in the cache-as-ram region
which persists across verstage and romstage. The current
assumption is that verstage brings cache-as-ram up
and romstage tears cache-as-ram down. The timestamp,
cbmem console, and the vboot work buffer are persistent
through in both romstage and verstage. The vboot
work buffer as well as the cbmem console are permanently
destroyed once cache-as-ram is torn down. The timestamp
region is migrated. When verstage is enabled the assumption
is that _start is the romstage entry point. It's currently
expected that the chipset provides the entry point to
romstage when verstage is employed. Also, the car_var_*()
APIs use direct access when in verstage since its expected
verstage does not tear down cache-as-ram. Lastly, supporting
files were added to verstage-y such that an x86 verstage
will build and link.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados using separate verstage.
Change-Id: I097aa0b92f3bb95275205a3fd8b21362c67b97aa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11822
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
When a separate verstage is employed the verstage file
was just being added through the cbfs-files mechanism.
However, that doesn't allow one to specify other flags
that aren't supported that an architecture may require.
The x86 architecture is one of those entities in that
it needs its verstage to be XIP. To that end provide
a mechanism for adding verstage with options.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados using his mechansim on x86.
Change-Id: Iaba053a55a4d84d8455026e7d6fa548744edaa28
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11819
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
In order to support x86 verstage proper the work buffer
needs to live in cache-as-ram. However, after cache-as-ram
is torn down one still needs the verification results to
know which slot was selected. Though the platforms with
a dedicated SRAM can just use the work buffer in SRAM, the
x86 cache-as-ram platforms need a place to stash the
results. For that situation cbmem is employed. This works
because when cbmem is initialized cache-as-ram is still
enabled. The VBOOT_DYNAMIC_WORK_BUFFER case assumes
verified boot doesn't start until after cbmem is up. That
doesn't change, but it's a goal to get rid of that option
entirely once all other x86 platforms are moved over to
pre-romstage vboot.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados with pre-romstage verification
as well as VBOOT_DYNAMIC_WORK_BUFFER case.
Change-Id: I7eacd0edb2b6ca52b59b74075d17c00b50676d4c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11821
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For the purpose of isolating the work buffer logic
the surface area of the API was slimmed down. The
vb2_working_data structure is no longer exposed,
and the function signatures are updated accordingly.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: If64184a79e9571ee8ef9822cfce1eda20fceee00
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11818
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Now that cbfs is adding more metadata in the cbfs file
header one needs to access that metadata. Therefore,
add struct cbfsf which tracks the metadata and data
of the file separately. Note that stage and payload
metadata specific to itself is still contained within
the 'data' portion of a cbfs file. Update the cbfs
API to use struct cbfsf. Additionally, remove struct
cbfsd as there's nothing else associated with a cbfs
region aside from offset and size which tracked
by a region_device (thanks, CBFS_ALIGNMENT!).
BUG=None
BRANCH=None
TEST=Built and booted through end of ramstage on qemu armv7.
Built and booted glados using Chrome OS.
Change-Id: I05486c6cf6cfcafa5c64b36324833b2374f763c2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11679
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Up to now, the multi-CBFS code path merely looked up files in the "boot
ro" image (ie. the default), disregarding the specified fmap region to
use for CBFS.
The code still relies on the master header being around, which on the
upside allows it to skip an offset at the beginning of the region (eg.
for ARM bootblocks).
This will change later (both the reliance on the master header and the
presence of the bootblock like this).
Change-Id: Ib2fc03eac8add59fc90b4e601f6dfa488257b326
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11805
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Certain chipsets provide their own main symbol for verstage.
Therefore, it's necessary to know this so that those chipsets
can leverage the common verstage flow.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built nyan using this option.
Change-Id: If80784aa47b27f0ad286babcf0f42ce198b929e9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11777
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
vboot_handoff_flag was duplicating the logic to grab the handoff info, that is
already made available with vboot_get_handoff_info.
This uses vboot_get_handoff_info in vboot_handoff_flag instead.
Change-Id: I28f1decce98f988f90c446a3a0dbe7409d714527
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11498
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
