| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I6a0752cf0c0e484e670acca97c4991b5578845fb
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11081
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
On my Foxconn nT-A3500 on cold boot the board doesn't survive the soft
reboot in the UsbRxMode path and the vendor bios doesn't touch this
Cg2Pll voltage setting either.
The fixup code for UsbRxMode in src/vendorcode/amd/cimx/sb800/SBPort.c
doesn't seem to "CG PLL multiplier for USB Rx 1.1 mode", but rather
lowers the Cg2Pll voltage from the hw default of 1.222V to 1.1V
by setting Cg2Pll_IVR_TRIM in CGPllConfig5 to 1000.
See also USB_PLL_Voltage which is only used in the UsbRxMode code path.
However if this is already the efuse/eprom default for the SB800 then
UsbRxMode is a no-op, so whether or not it gets executed depends on the
very exact hw revision of the southbridge chip and could change between
two instances of the same board.
UsbRxMode used to be unitialized and was first set to default to 1
in http://review.coreboot.org/6474 (change I32237ff9,
southbridge/amd/cimx/sb800: Uninitialized variables in config func):
> > Why initialize those to 1? (just curious)
> See src/vendorcode/amd/cimx/sb800/SBTYPE.h
> git grep 'SbSpiSpeedSupport\|UsbRxMode'
> src/vendorcode/amd/cimx/sb800/SBTYPE.h
I could not find a corresponding errata in the SB800 errata list,
however errata 15 (USB Resets Asynchronously With Port CF9h Hard Reset)
might play into this being unsafe to do since the code uses CF9h to
reset.
So its possible that while previously undefined it still ended up
defaulting to 0 and the codepath exercised on my board is simply
buggy or there is a difference between a true "SB800" and the
"A50 Hudson M1" presumably used on my board.
Change-Id: I33f45925e222b86c0a97ece48f1ba97f6f878499
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: http://review.coreboot.org/10549
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Instead of reaching into src/include and re-writing code
allow for cleaner code sharing within coreboot and its
utilities. The additional thing needed at this point is
for the utilities to provide a printk() declaration within
a <console/console.h> file. That way code which uses printk()
can than be mapped properly to verbosity of utility parameters.
Change-Id: I9e46a279569733336bc0a018aed96bc924c07cdd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11592
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This is required the BLOB change Icb7a4f07
"AMD Merlin Falcon: Update to CarrizoPI 1.1.0.0 (Binary PI 1.4)"
This is tested on Bettong Alfa(DDR3) and Beta(DDR4). Both of the
boards can boot to Windows 8.1. PCIe slots, USB and NIC work.
Change-Id: Ibe141c16f8f9eac2adc5d5f45a1f354fb2a7f33c
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/11148
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
This is required the BLOB change I67817dc59
AMD Steppe Eagle: Update to MullinsPI 1.0.0.A (Binary PI 1.1).
This is tested on Olive Hill Plus. The board can boot to Windows 7.
PCIe slot, USB and NIC work.
Change-Id: I605df26b61bdffabd74846206ad0b7bf677ebed1
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/11225
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
:'<,'>s,\ *$,,
Change-Id: I9fca0e12f02d6fff4644abacecd4a31cea64bbc1
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11024
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The AMD AGESA binaryPI sources were incorrectly committed to
3rdparty/blobs. Move them from blobs to vendorcode and fix
Kconfig and Makefile.inc to match.
Change-Id: I55a777553c1203464d7f7f4293b361fedcfa3283
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/10982
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The *_SELECTED Kconfig variables are not needed with the
options contained within "if CPU_AMD_AGESA_BINARY_PI"
introduced in e4c17ce8. It also removes the need to
source and select the default prior to selecting the
AGESA source or AGESA PI option.
Change-Id: Iffa366f575f7f155bd6c7e7ece2a985f747c83be
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/10981
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Make SB800 code compile with x64 compiler
These fixes probably apply 1:1 to the other SB components
in that directory.
Change-Id: I9ff9f27dff5074d2faf41ebc14bfe50871d9c7f7
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/10573
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
Change-Id: Ic6b3c3382a6d3fdc6d716ea899db598910b4fe3e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/10581
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
1. Use enable_imc_thermal_zone to enable fan control.
2. The ACPI method ITZE works on Ubuntu 14.04 and Windows 7
but does not work on Windows 8, so I didn't use it.
After this issue is fixed, I'll add ACPI_ENABLE_THERMAL_ZONE
in bettong/Kconfig.
3. Fan control works on Bettong. I used "APU Validation Toolkit"
to test on Windows 8. This tool can put load to APU. The fan's
behaviour is just like bettong/fchec.c defined. When the temperature
is 40 Celsius, the fan start to run.
Change-Id: I0fc22974a7a7cf3f6bdf5f1c66be95219a177e12
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/10721
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Binary PI doesn't provide fan control lib.
HwmLateService.c and ImcLib.c are ported from Kabini PI.
I have tested on AMD Bettong. The two files work.
Change-Id: Ia4d24650d2a5544674e9d44c502e8fd9da0b55d3
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/10719
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Fix up all the code that is using / to use >> for divisions instead.
Change-Id: I8a6deb0aa090e0df71d90a5509c911b295833cea
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10819
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I61a9f65a1ac4c95096d0ff071a95984cf219caa8
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10593
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
Instead of having three copies of amdlib, the glue code for Agesa,
let's share the code between all implementations (and come up with
a versioned API if needed at some point in the future)
Change-Id: I38edffd1bbb04785765d20ca30908a1101c0dda0
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10507
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Add all of the PI source that will remain part of coreboot to
build with a binary AGESA PI BLOB. This includes the gcc makefiles,
some Kconfig, and the AGESA standard library functions.
Change vendorcode Makefile and Kconfig so that they can compile
AMD library files and use headers from outside the coreboot/src
tree.
Change-Id: Iad26689292eb123d735023dd29ef3d47396076ea
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/10416
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
The AGESA.c file in 3rdparty has cbfs access functions
for locating the AGESA binaries. coreboot access functions
need to be within coreboot where they can be updated with
cbfs changes. Move the offending function to coreboot.
Change-Id: Ibf6136d04dfbdb0198e90cc3ce719dc286c5610e
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/10058
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There's now room for other repositories under 3rdparty.
Change-Id: I51b02d8bf46b5b9f3f8a59341090346dca7fa355
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10109
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
To move 3rdparty to 3rdparty/blobs (ie. below itself
from git's broken perspective), we need to work around
it - since some git implementations don't like the direct
approach.
Change-Id: I1fc84bbb37e7c8c91ab14703d609a739b5ca073c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10108
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Adds option FORCE_AM1_SOCKET_SUPPORT to disable
package type mismatch check between cpu and northbridge.
Default agesa for kabini doesn't know about AM1 socket
so it returns FALSE, that stops memory config code.
With this hack current agesa version supports the AM1 socket.
Change-Id: I99e9cec5cd558087092cf195094df20489f6d3b5
Signed-off-by: Sergej Ivanov <getinaks@gmail.com>
Reviewed-on: http://review.coreboot.org/9291
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
|
|
Make the build tolerate re-definitions.
Change-Id: Ia7505837c70b1f749262508b26576e95c7865576
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8609
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
If devicetree.cb has GPP port off, really disable it before even
trying to do link training.
Change-Id: I810945da28d86768e88249dc4d29a50ad9f9959b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8385
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
05000028 -> 05000029 tested on asrock E350M1
05000101 -> 05000119
Change-Id: Iccb096eb55a4a789c1e810f68c8c8eacfd5f8a0b
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8296
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
To maintain consistancy with southbridge/amd/agesa/hudson rename
pi/avalon to pi/hudson in advance of adding support for the
base hudson southbridge.
Change-Id: Icff8c4c06aae2d40cbd9e90903754735ac3510c3
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8251
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Add all of the PI source that will remain part of coreboot to
build with a binary AGESA PI BLOB. This includes the gcc makefiles,
some Kconfig, and the AGESA standard library functions.
Change vendorcode Makefile and Kconfig so that they can compile
AMD library files and use headers from outside the coreboot/src
tree.
This fix changes the makefile so that the AGESA dispatcher is
built using its own rules rather than generic library generation
rules in coreboot/Makefile and coreboot/Makefile.inc. The AGESA
source files are initially copied from whereever they live into
coreboot/build/agesa. They are compiled from there. The binary
PI directory now has a mandatory structure that places the AGESA
BLOB into the same directory as the support headers. These will
nominally be placed in the amd directory in SageBIOS or the
3rdparty directory in coreboot.org.
Change-Id: I56788cd197159939b64c7d16c1d32418f8cc2197
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/5967
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Remove useless AGESA microcode macro that leads to unused variable
warnings.
Change-Id: Ia21bfc758f81e349bdd0bfd185df75e8b1898336
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8200
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
|
|
Change-Id: I41ba4cffa545a31c1e0845ec44c8a433bda9f99d
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7886
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: If46079c1affc7d74767c4215467fd6754b24f20c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7576
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The first dword in FirmwareTN has been changed from 0xa0009 to 0xa000e.
The FirmwareTNHeader is not called by any one in latest PI. It seems to
be useless for now.
Change-Id: Ic7a20e0bcca8de0b56c7bc5d01e0ce86347bde21
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/7844
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
As is the case in commit:
3312ed7 amd/agesa/f1?/Lib/amdlib.c: Integer overflow in loop construct
The semantics of this loop relies on an integer overflow in Index >=0
that implies a return value of (UINT8)-1 which around wraps to 0xFF, or
VOLT_UNSUPPORTED.
Also fix an infinite loop.
Change-Id: Iced3eff3ae7b8935db3bdd6147372cf3b540883c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7676
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Remove '__attribute__((optimize("Os")))' as it is unlikely to be
necessary as it is not used in other families that have the same
code and only hides deeper issues.
Change-Id: Ica890812ebc2fb659b9c3e46b40cf3f6534b3cf2
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/7689
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Clang complains:
"implicit truncation from 'int' to bitfield changes value from -1 to 15"
-1 is define in 'c11std 6.3.1.3p2' as:
[Signed and unsigned integers] Otherwise, if the new type is unsigned,
the value is converted by repeatedly adding or subtracting one
more than the maximum value that can be represented in the new type
until the value is in the range of the new type.60)
FOOTNOTE.60 The rules describe arithmetic on the mathem...
This is "0xFF" on Mullins and "0xF" in this case. Clang seems to
complain about this two's complement in a bitfield as being truncated.
As the bitfield is 4 bits wide, (a maximum of 15 decimal), we set the
field as '0x0F'. Ideally this field /should/ be set to 'UINT8_MAX' however
we still have silly truncation warnings.
Change-Id: Ib7476d453ffd932bb911e638117cf9f56f71f269
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7719
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Following the same reasoning as commit
ee905a8 vendorcode/amd/agesa/fam15tn: Build as a static library
Since AGESA is stage-independent, we can build it just once, and use
the resulting static library in both rom and ram stages.
Change-Id: I8fbb318daacf64a14a71022705eb040a01c34fa8
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7699
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Following the same reasoning as commit
ee905a8 vendorcode/amd/agesa/fam15tn: Build as a static library
Since AGESA is stage-independent, we can build it just once, and use
the resulting static library in both rom and ram stages.
Change-Id: I7798b689db3e582649eb4af4ccd1877bb1d49063
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7698
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Add decorations to specify that empty loop is intended so.
Change-Id: Ia3e40d341eca5e26da3832edc733cf1ccc96c136
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Found-by: Clang
Reviewed-on: http://review.coreboot.org/7688
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Topology Extensions Support (bit 54 of 0xC0011005) applies to
PACKAGE_TYPE_FS1r2 also. Rids us of:
"Re-enabling disabled Topology Extensions Support"
showing up in dmesg.
Change-Id: Id123fa9632936c150cf1aebc4d34b404a4398ead
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7671
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
The contents of these files were guarded by a check for the _MSC_VER
macro, which we don't use.
Change-Id: Ic595c8e6284c54e1449cf21e0cebee8c9ce7c682
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/7670
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ica17b2452498f30b710533caf610c9f0c1a0452c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7594
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Missing IOMMU support is missing from the libagesa Makefile, it also
lacks a header with type-signature and a few bad typecast issues.
Change-Id: I7f2ad2104de9baaa66dbb6ffeb0f2b4d35fa5c16
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Co-Author: Rudolf Marek <r.marek@assembler.cz>
Reviewed-on: http://review.coreboot.org/7642
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Right now, coreboot code using AGESA headers can only build if all the
AGESA path are given to the compiler via the "-I" option. This is sub-
optimal, as it requires us to have every AGESA source directory
specified as a compiler include path. This pollutes our global include
paths.
We restrict the compiler include paths to only allow "AGESA_ROOT/" and
"AGESA_ROOT/Include". We then modify the AGESA headers to specify
non-local include files relative to "AGESA_ROOT/Include".
We use the convention that includes relative to the directory of the
header are included as "path/to/header.h", while includes relative to
AGESA_ROOT are included as <path/to/header.h>.
This change allows building coreboot code based on AGESA with the
limited subset of include paths, but does not allow AGESA itself to
build with this restricted subset.
Change-Id: I31102273c8caa8d6b1d80774bfd35711825bec03
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5424
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
TL;DR ASCII art that sucks, remove it.
Change-Id: I424736b040fe019bba6155de76903225a266760d
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7641
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
We don't actually use nor support these as our implementation
makes use of gcccar.inc. They maybe useful as a reference for
history so lets keep them in version history.
Change-Id: I388251dead449dde14283e57db39c37982d947b2
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7596
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I6b20ded866fa0418bd24ce9eef3775557c2feec7
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7562
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
For the moment we make use of Trinity f15tn AGESA for Richland
f15rl support until we have properly worked out the discrepancies.
Adds RL-A1 Richland stepping cpuid to F15TnLogicalIdTables lookup.
We later wish to merge f15tn and f15rl support into the AGESA in
any case.
Change-Id: Ia9070d4e392ce7eb912771d1c7b3ef1440f8e8a8
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7559
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
|
|
To backport features introduced with recent Chromebooks and/or Intel
boards in general, heavy work on the AMD AGESA platform infrastructure
is required. With the AGESA PI available in binary form only, community
members have little means to verify, debug and develop for the said
platforms.
Thus it makes sense to fork the existing agesawrapper interfaces, to give
AMD PI platforms a clean and independent sandbox. New directory layout
reflects the separation already taken place under 3rdparty/ and vendorcode/.
Change-Id: Ia730f0e45e7c1bdfc0c91e95eb6729a77773e2b9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7388
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
To backport features introduced with recent Chromebooks and/or Intel
boards in general, heavy work on the AMD AGESA platform infrastructure
is required. With the AGESA PI available in binary form only, community
members have little means to verify, debug and develop for the said
platforms.
Thus it makes sense to fork the existing agesawrapper interfaces, to give
AMD PI platforms a clean and independent sandbox. New directory layout
reflects the separation already taken place under 3rdparty/ and vendorcode/.
Change-Id: Ib60861266f8a70666617dde811663f2d5891a9e0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7149
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
Reduce inconsequential differences between fam15 and
fam15tn to better prepare for possible merger.
Change-Id: I016aa1a4cc45553d51190988d48c8a54cfd85f5a
Signed-off-by: Sara Lelliott <sara@jupitercrash.org>
Reviewed-on: http://review.coreboot.org/7503
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Sync up these 'Porting.h' headers to include fixes from each
family on botched-up typedef's for primitive data types.
Fix corresponding breakage introduced by typecasts in
mainboards.
Change-Id: I003b155cc6c860f6b0cd75667083634a04814473
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7512
Tested-by: build bot (Jenkins)
|
|
Found missing '$' symbol on variable.
Change-Id: I748c315adc44598e16283f8e629be0ecfe9cb6a9
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: http://review.coreboot.org/7514
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Found an extra bracket that appears it should not be there.
Change-Id: I66b7967833afd25f12bd4eaaf6419a6ed3ad544b
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: http://review.coreboot.org/7515
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I059047390e80e084f5d7763259d918446d96931e
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/7294
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
Change-Id: I05d568f27f610c395e2638e79a7fd6646a407955
Found-by: Clang preprocessor wizard powers
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7441
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Version 0.9 contains a fix for a security issue. A more
detailed changelog is not available.
Change-Id: I1a66c9da900f89ba9b4c13f3457582278d3793e2
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/7293
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
Tested-by: build bot (Jenkins)
|
|
Apply commit 283ba78415 to f14 (literally, plus one adaptation).
Change-Id: Ieea47470e5852ec8a46596ce23a2d18444618624
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7361
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I3e9b7e0e5558a6942067dcea04b83fe3bccbbaf9
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7362
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Forward port commit:
db0e0e2 amd/agesa/*/gcc-intrin.h: Invaild inline asm
Change-Id: Ia857f76d3782aea07e09df1352eeb286e40b2689
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7302
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
Apply commit 283ba78415 to f12 (literally, plus one adaptation).
Change-Id: Ied7891806e269320caf968cae3de3dc792c5f8fd
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7312
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
Forward port commit:
db0e0e2 amd/agesa/*/gcc-intrin.h: Invaild inline asm
Change-Id: I52da16b39293c8aeff150db83b8b1aeaa232c205
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7299
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
Forward port commit:
db0e0e2 amd/agesa/*/gcc-intrin.h: Invaild inline asm
Change-Id: Ife26fb5eca5164e72b5e55eba90757253765b633
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7300
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
Forward port commit:
db0e0e2 amd/agesa/*/gcc-intrin.h: Invaild inline asm
Change-Id: Ic1bd19087a4500ba0ca9e312ea351e301ab42518
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7301
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
Change-Id: I242664032d368794d828fce73a20f75ded45051d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7151
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The static library builder for the stub that interfaces to the
AGESA binary does not include config.h and kconfig.h, so any
header file changes that depend on Kconfig variables fail. Force
these two system headers to be included in the build of any AGESA
stub files.
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Change-Id: I2e8d38fa5aa21cc31b995ee3abe68ab3c3c55a68
Reviewed-on: http://review.coreboot.org/6979
Reviewed-by: Martin Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Add all of the PI source that will remain part of coreboot to
build with a binary AGESA PI BLOB. This includes the gcc
makefiles, some Kconfig, and the AGESA standard library
functions.
Change vendorcode Makefile and Kconfig so that they can compile
AMD library files and use headers from outside the coreboot/src
tree.
The AGESA dispatcher is built using its own rules rather than
generic library generation rules in coreboot/Makefile and
coreboot/Makefile.inc. The AGESA source files are initially
copied from whereever they live into coreboot/build/agesa.
They are compiled from there. The binary PI directory has a
mandatory structure that places the AGESA BLOB into the same
directory as the support headers. These will nominally be
placed in the 3rdparty directory in coreboot.org.
The copy commands that were added to the the vendorcode
Makefile.inc ensure that only one thread will operate on each
source file by using a macro to generate the copy targets.
After the change, each copy target will operate on exactly one
source file.
Due to API issues, coreboot has no way to control the IMC to set up
fan control. Set a Kconfig flag that removes the ability to install
an IMC BLOB into CBFS.
Change-Id: I050b72a19086aaeba6cb65ce165297b10e3cfc45
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/6595
Tested-by: build bot (Jenkins)
Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
|
|
We already have these macros define in 'stdlib.h'. Make good use of them
here to avoid redefinition conflicts of the pre-processor depending on
header inclusion ordering. This has the nice side-effect of syncing up
AGESA families in this particular regard.
Change-Id: Icf911629a4a1a82b01062fe16af4c8f812b05717
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6199
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
Implement the fix for the erratum #712. - Processor May Hang During Graphics Memory Controller
Sequencing
The processor may hang during a graphics memory controller (GMC) sleep state transitioning. The failure may
be processor specific and may be sensitive to temperature.
Potential Effect on System:
System hang.
Suggested Workaround:
BIOS should set D18F2x408_dct[1:0] bit 31 = 1b.
See Publication # 48931 Revision: 3.08
Change-Id: I4346fd4ef3cf554ffdaaad5ab6fc84e73532e885
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Reviewed-on: http://review.coreboot.org/6216
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: Ic63c456e775ad0863ea773abd957d9399e8e2a13
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6191
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I716253fe8532a4215e5770cd901ee3b3c4963d3d
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6187
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Iace2ccfe95bd7f7e5dabbbc69ee4249d80d1cb84
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6190
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Ieca3358a2a459016b7a38dce7f717100b55baba5
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6186
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Ie8d74970ef8969cf65b40970cb234399c3db8e56
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6189
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I8f4b2b555d71dd30f134e41ce998c946c4ac0280
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6185
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I3af50553191d7df9255be222eaf941b4232955d9
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6188
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I485f79ece481210f31b0b6d3c62d7269131e29ab
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6184
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Forward port commit:
db0e0e2 amd/agesa/*/gcc-intrin.h: Invaild inline asm
Change-Id: I87bf101b15bac7c06afa9cec10e2bd4e0cdfd6c7
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5941
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Change-Id: I710efc3171e1653241f2dba1217a9560d2d99a16
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5802
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
_CPU_L3_FEATIRES_H -> _CPU_L3_FEATURES_H
Spotted by Clang
Change-Id: I1eabebffc7fd5e4f37b28dabcd28984bed64acd8
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5818
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The 'm' (a memory reference) constraint makes little sense here since we
are talking about a fs relative read, rather 'ir' (immediate or
register) constraint is more sensible.
N.B. The 'p' constraint allows anything which fits the form of an address
calculation where the 'ir' constraint is just a register /xor/
immediate. Hence would produce better code here however, unfortunately,
clang does not currently support it properly.
The %b and %w constraints are also redundant and only hide errors.
The functions writefsword() and writefsdword() should use ir instead of
iq. iq is unnecessarily restrictive (it is only required for writing
bytes).
The cld in stosb is redundant (and the constraints are unnecessarily
complicated). Note that The ABI guarantees that the direction flag is
cleared. i.e. eax, ecx, edx are caller-saved, returned value in eax,
eax+edx, st0, yaddayadda, direction flag cleared. In fact bad things can
happen if you set it in some asm and do not clear it until the end of
the asm.
Line wrap these extraneously long lines found with these particular functions.
Many thanks to Christoph Mallon <christoph.mallon@gmx.de> from #llvm for
helping me with this.
Change-Id: Iaf3ad65791640e1060a2029e7ebb043f57b338a9
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5758
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The semantics of this loop relies on an integer overflow in Index >=0
that implies a return value of (UINT8)-1 which around wraps to 0xFF, or
VOLT_UNSUPPORTED.
Change-Id: I44d68973d0a80093350b2a8a4d3b46bfbb57917a
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5801
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The typedef'ed BIT_FIELD_NAME enum is type unsigned. The parameter
'FieldName' is decleared with type BIT_FIELD_NAME and thus the redudant
comparison of unsigned enum expression >= 0 is always true.
BIT_FIELD_NAME is declared in vendorcode/amd/agesa/f14/Proc/Mem/mm.h
Change-Id: Id2f03596c44b68e861e939f3528256d4b08c45ce
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5757
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The conditional comparison in the for-loop construct with the constant
300000 has an index incrementor of type 'UINT16' (aka 'unsigned short')
which is always true.
Change-Id: I932c168742163be4038728fb40833231a447fa78
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5799
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The function GfxPowerPlayLocateTdp() sets MinDeltaSclk to a maximum
sentinel value and checks DeltaSclk in a loop to minimize MinDeltaSclk.
However, MinDeltaSclk incorrectly self-assigns.
Change-Id: Id01c792057681516bba411adec268769a3549aa8
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5752
Tested-by: build bot (Jenkins)
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
|
|
Change-Id: I31632948ce69b2d1ff63b6c920016ed6fdf9e2f8
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5760
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Change-Id: I1d801b9d8387e267feeb95563e55910b30ebbc34
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5790
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
They don't exactly add clarity, but increase the risk
they're used at some obscure place.
Change-Id: Ic74f72dae3f9b7eb2343cb5c51bc44c888e1276c
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5787
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
They're _not_ part of the compiler binary, so they have
no place in $(CC_*)
Change-Id: I1e1c3c0be6f75629450a824ea834e1614d48ed9b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5785
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
With the upcoming CC/CFLAGS/CPPFLAGS split,
romcc gets more CPPFLAGS, and it's picky about
directories actually existing.
Change-Id: Ib9c525296e5be0c8ace935ab8096bc98206cbcc1
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5784
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Make all three coreboot stages (bootblock, romstage and ramstage) aware of the
architecture specific to that stage i.e. we will have CONFIG_ARCH variables for
each of the three stages. This allows us to have an SOC with any combination of
architectures and thus every stage can be made to run on a completely different
architecture independent of others. Thus, bootblock can have an x86 arch whereas
romstage and ramstage can have arm32 and arm64 arch respectively. These stage
specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain
and compiler flags for every stage.
These options can be considered as either arch or modes eg: x86 running in
different modes or ARM having different arch types (v4, v7, v8). We have got rid
of the original CONFIG_ARCH option completely as every stage can have any
architecture of its own. Thus, almost all the components of coreboot are
identified as being part of one of the three stages (bootblock, romstage or
ramstage). The components which cannot be classified as such e.g. smm, rmodules
can have their own compiler toolset which is for now set to *_i386. Hence, all
special classes are treated in a similar way and the compiler toolset is defined
using create_class_compiler defined in Makefile.
In order to meet these requirements, changes have been made to CC, LD, OBJCOPY
and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others.
Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the
toolsets are defined using create_class_compiler.
Few additional macros have been introduced to identify the class to be used at
various points, e.g.: CC_$(class) derives the $(class) part from the name of
the stage being compiled.
We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER
as they do not make any sense for coreboot as a whole. All these attributes are
associated with each of the stages.
Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5577
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Following the same reasoning as commit
ee905a8 vendorcode/amd/agesa/fam15tn: Build as a static library
Since AGESA is stage-independent, we can build it just once, and use
the resulting static library in both rom and ram stages.
Change-Id: I8b78c462f4963fbb3a40d739196529fffedccb4c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5441
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Up until now, we were building AGESA by specifying each AGESA source
file and adding it to the list of romstage and ramstage source files.
As a result, we were compiling each AGESA source twice, despite the
fact that it does not depend on the stage we're in.
Since AGESA is stage-independent, we can build it just once, and use
the resulting static library in both rom and ram stages.
We still keep the practice of specifying every single AGESA directory
as an include dir and adding the AGESA CFLAGS to our global CFLAGS;
this is needed due to the way AGESA builds.
Change-Id: I9b23264129d1c08cb67cabc31d15a68d43ed7624
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5430
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
The ROM address range is set up in the LPC PCI device, register 0x6c.
Coreboot already sets that up correctly in the bootblock, however
AGESA overrides that to 0xffffff00, which will always map the ROM from
0xff000000. This may conflict with other devices which are assigned
address space in that range.
If a device is assigned a range between 0xff000000 and the real ROM
base, accesses to that device will be diverted to the system ROM,
regardless of how other BARs are set up. Since we already need to set
up the ROM address range in the bootblock, before calling AGESA, just
remove the override from AGESA.
Note that not all AGESA versions override this mapping.
Change-Id: I592e5d087ed830c9604a04a356912c7654ce56d2
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5467
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
A comparison with a two's complement in gcccar.inc has dubious
GAS/AT&T notation. Clang miss-parses 0x-1 as an invalid hexadecimal
number.
Change-Id: I88baa5c2513f062ff309df05916a3832b9bd9bb1
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5277
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
It is inappropriate for chipset code to be redefining
types -- especially NULL to a non-pointer type. There's
only one non-straight forward change. A condition
being checked was '!ptr_type == NULL' (0 as int). That
check is actually 'ptr_type != NULL'.
Change-Id: Iab5733e5a573baba6fec94e0c955ba4fad72c836
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5088
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The AGESA resumes the GPP ports in the romstage using FchInitResetGpp(),
which does FchGppPortInitS3Phase() for S3 resume. The PreInitGppLink()
looks into CMOS to figure out what ports to just force to Gen1 or
Gen2 PCIe. Then boot continues and in the ramstage the rest of GPP
init is executed. There is a problem that nobody sets properly the
PortDetected flags in the S3 path. As the consequence FchGppDynamicPowerSaving()
thinks the GPP port is not enabled and shut downs it.
The best fix would be also to remove the CMOS dependency which
might be some left over, because AGESA does not use CMOS much for
anything else. There could be also some way how to pass the GPP state
structure from romstage to ramstage possibly via hudson/resume.c
but I don't know how to do that. Similar problem is that the "late"
stage of init again "forgets" the PortDetected state.
This fix fixes the resume issue on Asus F2A85-M. With this patch applied
both GPP ports (used as PCIe x1 and internal ethernet) are working again
after resume.
Change-Id: Idaf609043abb09441c6790504d66d23e0637588f
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Reviewed-on: http://review.coreboot.org/4671
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Some files have incorrect/odd permissions,
correct them: remove unnecessary +x flags.
Change-Id: I784e6e599dfee88239f85bb58323aae9e40fb21c
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/4490
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
Delete files that (were overlooked and) are probably needed to
build with Visual Studio.
Remove doxygen helper files as well.
Change-Id: I6b6cece178917ad9da1081eb6b1bb9be33066a77
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/4489
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
The bug is hard to find. We were adding the feature of fan control. We
met some strange things which could not be explained. Like, sometimes
adding printk let the error disappear. Then we traced the code by hardware
debug tool (HDT). It turned out the data in stack was overwritten.
The values of AccessWidthxx are
{ AccessWidth8 = 1,
AccessWidth16,
AccessWidth32,}
For the case of AccessWidth8, we only need to access the index/data
once. But ReadECmsg and WriteECmsg did the loop twice, 1 more time
than they are supposed to do. The data in stack next to "Value" would
be overwritten.
For all the cases, the code should be
OpFlag = OpFlag & 0x7f;
switch (OpFlag) {
case 1: /* AccessWidth8 */
OpFlag = 0;break;
case 2: /* AccessWidth16 */
OpFlag = 1;break;
case 3: /* AccessWidth32 */
OpFlag = 3;break;
case 4: /* AccessWidth64 */
OpFlag = 7;break;
default:
error;
}
Actually, the caller only takes AccessWidth8 as the parameter. We can ignore other
cases for now.
That is an AGESA bug. AMD's AGESA team own this code. They have given the
response that they are going to update this in next release. I presume let them
decide the proper way to fix that. Before that, I change the code as little
as possible to make it run without crash.
Change-Id: I566f74c242ce93f4569eedf69ca07d2fb7fb368d
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/4297
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
The platform initialization (PI) code v1.0.0.7 for Kabini has some
enhancements like ECC DIMM support, new CPU microcode rev 0700010B, FCH
bug fix (RTC) and so on.
Use the name Kabini instead of Kerala everywhere.
Note, the former PI code was indeed version v1.0.0.0 instead of v0.0.1.0
as used in `AGESA_VERSION_STRING`.
Change-Id: I186de1aef222cd35ea69efa93967a3ffb8da7248
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/3935
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
Northbridge code includes these headers, so they all need to
have the same name to allow different combinations of northbridge
and southbridge. This changes the sb900 names to match sb700 &
sb800, and points agesa/family12 and amd/torpedo to the new file
names.
Change-Id: I7a654ce9ae591a636a56177f64fb8cb953b4b04f
Signed-off-by: Corey Osgood <corey.osgood@gmail.com>
Reviewed-on: http://review.coreboot.org/3825
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
src/southbridge/amd/agesa/hudson/Kconfig config default value,
mainboard Kconfig config value for specific mainboard.
bit 1,0 - pin 0
bit 3,2 - pin 1
bit 5,4 - pin 2
bit 7,6 - pin 3
Change-Id: I54a87cf734685515a3e1850838ca7d94387172ce
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/3879
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
|
