summaryrefslogtreecommitdiff
path: root/src/vendorcode/amd
AgeCommit message (Collapse)Author
2017-03-09AGESA: Use printk for IDS outputKyösti Mälkki
In all simplicity, with board/OptionsIds.h file having: IDSOPT_IDS_ENABLED TRUE IDSOPT_TRACING_ENABLED TRUE And src/Kconfig modified to: config WARNINGS_ARE_ERRORS default n With these settings AGESA outputs complete debugging log where-ever you have your coreboot console configured. Change-Id: Ie5c0de6358b294160f9bf0a202161722f88059c1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15320 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins)
2017-03-09AGESA: Make eventlog more tolerant to failuresKyösti Mälkki
We have been forced to build AGESA with ASSERT() as non-fatal for some board, as hitting those errors is not uncommon. For the cases touched here, abort eventlog operations early to avoid further errors and dereference of null pointers. Change-Id: I1a09ad55d998502ad19273cfcd8d6588d85d5e0c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18543 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-03-09AGESA: Apply a threshold on event loggingKyösti Mälkki
Implement threshold as described in AMD.h, and do not add entries below STATUS_LOG_LEVEL in the eventlog. Change-Id: Ic9e45b1473b4fee46a1ad52d439e8682d961dc03 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18542 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-03-07Stage rules.h: Add ENV_LIBAGESAKyösti Mälkki
Definition is required to enable use of printk() from AGESA proper. Change-Id: I6666a003c91794490f670802d496321ffb965cd3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18544 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-14AGESA: Remove nonexistent include pathKyösti Mälkki
Change-Id: I3395e274e0ba43de7e7306daedeb26c75de65ee1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18327 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-18AMD binaryPI: Promote rules.h to default includeKyösti Mälkki
Also remove config.h, kconfig.h will pull that one in. Change-Id: I798b3ffcf86fca19ae4b0103bb901a69db734141 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17667 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-14vendorcode/amd: drop dead codePatrick Georgi
Change-Id: Ie67e1f7887e8df497d7dfd956badd9e06fd5d8a3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1254651 Reviewed-on: https://review.coreboot.org/17833 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-14vendorcode/amd: Fix non-terminating loopPatrick Georgi
Code is copied from agesa/common's amdlib.c. Things can probably be deduplicated. Change-Id: I9c8adab5db7e9fd41aecc522136dfa705c1e2ee6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1229662 Reviewed-on: https://review.coreboot.org/17834 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins)
2016-12-13vendorcode/amd/agesa: Remove flawed warningŁukasz Dobrowolski
The compilation would fail if CFG_MEMORY_LRDIMM_CAPABLE == FALSE and BLDOPT_REMOVE_LRDIMMS_SUPPORT == TRUE. Change-Id: I1be37e368bc4ed07e59d0f0bb967bed11143a65b Signed-off-by: Łukasz Dobrowolski <lukasz@dobrowolski.io> Reviewed-on: https://review.coreboot.org/17354 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-12-08buildsystem: Drop explicit (k)config.h includesKyösti Mälkki
We have kconfig.h auto-included and it pulls config.h too. Change-Id: I665a0a168b0d4d3b8f3a27203827b542769988da Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17655 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-22src/vendorcode/amd/agesa: Fix castingŁukasz Dobrowolski
When IDSOPT_TRACING_ENABLED is TRUE build fails with "cast from pointer to integer of different size" Use "UINTN" as is done in Family 16h. Change-Id: I362e67fc83aa609155f959535f33be9c150c7636 Signed-off-by: Łukasz Dobrowolski <lukasz@dobrowolski.io> Reviewed-on: https://review.coreboot.org/17406 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-07vendorcode/amd: Update Kconfig and makefiles for 00670F00Marc Jones
Add Stoney specific code subtree and fix Makefles and Kconfig files. Original-Author: Charles Marslett <charles@scarlettechnologies.com> Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit 51a187a3d08a425ef0cc141a7ddc49a70ac931b1) Change-Id: I13c6b08c780e7bd2abd0fabbde1a89686132f65c Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17196 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07vendorcode/amd: Modify 0067F00 for binaryPIMarshall Dawson
Make changes to the vendorcode files that allow them to work with the binaryPI. This fixes various compile issues and establishes a common calling convention between coreboot and AGESA. Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit f7ea2785d70bd6813b5b4d315b064802251d9557) Change-Id: Ie36228476a9dbd7b83f95828ca9c7252cecd8ec8 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17195 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07vendorcode/amd: Copy 00670F00 files from PI packageMarshall Dawson
Make exact copies of the AGESA files from the Stoney PI package replacing existing versions. Change the license text and fix up misc. whitespace. This will facilitate the review of binaryPI changes in the vendorcode directory. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 1097249585ab76fab59dcfbf8e7a419f34fcfcb6) Change-Id: I9951df58aeab2d533efc0a837ce35f343ff28d7c Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17194 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07vendorcode/amd: Copy 00660F01 directory to 00670F00Marc Jones
Prepare for new 00670FF00 support. Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit ca53cac5c847c55e56ad6f5feb382c04f33ae77a) Change-Id: Ib48b1611bf70ec302c50f6e07bd2b3d9b09e0a24 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17193 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02vendorcode/amd/f14: Fix ignored argument in IDS_HDT_CONSOLEŁukasz Dobrowolski
String format required two arguments however those were packaged in ( , ) so the left one was ignored. Change-Id: I59698319d5ff4215f296356147b4e22229cc9245 Signed-off-by: Łukasz Dobrowolski <lukasz@dobrowolski.io> Reviewed-on: https://review.coreboot.org/17118 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-10-02vendorcode/amd/pi/Kconfig: update AGESA_BINARY_PI_LOCATION to hexMartin Roth
The AGESA_BINARY_PI_LOCATION Kconfig symbol was declared as a string. Change it to a hex value. Change-Id: Ifd87b6c8dfcdf950aea9b15a6fea45bb72e8b4e9 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16835 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-09vendorcode/amd: Remove dead codePatrick Georgi
Change-Id: I6b21822d60d379cb8cd21b69c714a437bb7977ce Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1254643 and others Reviewed-on: https://review.coreboot.org/16112 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-08vendorcode/amd/pi/Lib: Fix reporting fatal errorPatrick Georgi
Instead of writing the first word of 6 "post code structs" where only one exists (leading to 0xDEAD and 5 garbage words), write the correct set. Change-Id: Ifdfa53a970dda33dc9dc8c05788875077c001ecf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1361054, #1361055, #1361056 Reviewed-on: https://review.coreboot.org/16058 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-27Rename VB_SOURCE to VBOOT_SOURCE for increased clarityPaul Kocialkowski
This renames the VB_SOURCE variable to VBOOT_SOURCE in the build system, providing increased clarity about what it represents. Since the submodule itself is called "vboot", it makes sense to use that name in full instead of a very shortened (and confusing) version of it. Change-Id: Ib343b6642363665ec1205134832498a59b7c4a26 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/15824 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-22amd/agesa/f16kb: Allow SATA Gen3Fabian Kunkel
YangtzeSataResetService implements the SataSetMaxGen2 double. The value should be only set, if the condition is met. For testing, add FchParams_env->Sata.SataMode.SataSetMaxGen2 = FALSE; to your BiosCallOuts.c, which enables GEN3 for the SATA ports. Patch is tested with bap/e20xx board, Lubuntu 16.04 Kernel 4.4. $ dmesg | grep ahci #before patch ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode $ dmesg | grep ahci #after patch ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode Change-Id: I17a493b876a4be3236736b2116b331e465b159af Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com> Reviewed-on: https://review.coreboot.org/15728 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-01AGESA boards: Fix split to romstage and ramstageKyösti Mälkki
Boards broken with commit: 062ef1c AGESA boards: Split dispatcher to romstage and ramstage Boot failure with asus/f2a85-m witnessed around MemMS3Save() call, message "Save memory S3 data in heap" in verbose agesa logs was replaced by a system reset. Default stubs for MemS3ResumeConstructNBBlock() returned TRUE without initializing the block contents. This would not work for case with multiple NB support built into same firmware. MemMCreateS3NbBlock() then returned with S3NBPtr!=NULL with uninitialized data and MemMContextSave() referenced those as invalid pointers. There is no reason to prevent booting in the case S3 resume data is not passed to ramstage, so remove the ASSERT(). It only affects builds with IDSOPT_IDS_ENABLED=TRUE anyways. Change-Id: I8fd1e308ceab2b6f4b4c90f0f712934c2918d92d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15344 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2016-06-04AGESA boards: Split dispatcher to romstage and ramstageKyösti Mälkki
The way dispatcher table is set up prevents linker from optimizing unused code away, we currently have raminit in ramstage. Optimize this manually by configuring AGESA_ENTRY booleans for romstage and ramstage separately. This will remove references in FuncParamsInfo and DispatchTable -arrays. All boards now include multi-core dispatcher, it has minimal footprint: AGESA_ENTRY_LATE_RUN_AP_TASK ACPI S3 support depends on HAVE_ACPI_RESUME being enabled: AGESA_ENTRY_INIT_RESUME AGESA_ENTRY_INIT_LATE_RESTORE AGESA_ENTRY_INIT_S3SAVE Disabled for all boards as it was not used: AGESA_ENTRY_INIT_GENERAL_SERVICES Change-Id: I7ec36a5819a8e526cbeb87b04dce4227a1689285 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14417 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-04AGESA f12 f15: Add OEM customisationKyösti Mälkki
Follow-up on commits a5d72a3 and 53052fe for f12 and f15. OEM Hooks are not BiosCallOuts. Change-Id: Iab22b0d73282a5a1a5d1344397b4430c0ebb81b5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14888 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-04AGESA: Fix invalid BLDCFG_ and CFG_ useKyösti Mälkki
The definitions of CFG_ would evaluate to incorrect values when Options.h is included outside buildOpts.c, where all BLDCFG_ values are defined. Already done for f16kb. Change-Id: I5d725b9306027c7c46c6450ab17b692fa948cf5b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14886 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-04AGESA: Drop unused assembly filesKyösti Mälkki
Change-Id: I0a452b6234b02222be82ca8694868e1ffbfceaee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14396 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-04AGESA: Remove unused platform configuration filesKyösti Mälkki
Change-Id: Ie6effa802f6971c59b5c4e07ca7d98736e27859f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14885 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-04AGESA f10: Pick sample platform configurationKyösti Mälkki
Tree does not have any AGESA f10 boards. Keep the Danube platform as a sample configuration file for unlikely future use. Change-Id: I025aff48fcd0884b45e2a0a993d82f317ede48be Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14884 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-18AGESA vendorcode: Build a common amdlibKyösti Mälkki
Having CFLAGS with -Os disables -falign-function, for unlucky builds this may delay entry to ramstage by 600ms. Build the low-level IO functions aligned with -O2 instead. Change-Id: Ice6781666a0834f1e8e60a0c93048ac8472f27d9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14414 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-18AGESA vendorcode: Move compiler class definitionKyösti Mälkki
Change-Id: Ia4cef7d584e43f1911db2f81d8b86ed406b75aad Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14786 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-13AMD fam14: Blacklist Intel Centrino n6235 from PCIe ASPMKyösti Mälkki
PCI device ID of this mini-PCI-e WLAN card is 8086:088e. With this card inserted on pcengines/apu1 mini-PCI-e slot J17, system halts late in ramstage, in agesawrapper AMD_INIT_MID. Offending operation is enabling PCIe ASPM L0s and L1 for the card. That is, writing PCIe capability block Link Control [1:0] = 11b in the card's configuration space. AGESA already has a blacklist for the purpose of masking such unstable ASPM implementations. Change-Id: I9623699c4ee68e5cdc244b87faf92303b01c4823 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/8496 Tested-by: build bot (Jenkins) Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-12AGESA vendorcode: Drop alternate image dispatcherKyösti Mälkki
Not used as we link AGESA into same romstage and ramstage ELF. Change-Id: Ia427b9c0cc88b870de75df14bba4ca337a28adff Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14395 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-12AGESA f12: Build as libagesa.aKyösti Mälkki
Change-Id: If48fffee1441b6bb012a8d99abb794f7a35efcf6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14412 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-12AGESA f16kb: Build as libagesa.aKyösti Mälkki
Change-Id: I9faeda508694f950f1b025765e2ac63bc91747fa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14411 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-10AGESA boards: Relocate platform memory configKyösti Mälkki
File buildOpts.c is a can of worms, pull platform memory configuration in to OemCustomize.c. This array should be assigned at runtime instead of linking a modified defaults table. Change-Id: I73d9d3fbc165e6c10472e105576d7c40820eaa6a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14528 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-21AGESA vendorcode: Fix type mismatchKyösti Mälkki
Fix is required to compile AGESA ramstage without raminit. Change-Id: I783883fa7a12e8a647aa432535bb990a47257e9b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14416 Tested-by: build bot (Jenkins) Reviewed-by: Kerry Sheh <shekairui@gmail.com>
2016-04-20AGESA vendorcode: Suppress maybe-uninitialized warningsKyösti Mälkki
Compiling libagesa with -O2 would throws error on these. Change-Id: I04afa42f0ac76677f859ca72f9df2e128762ad3c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14413 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-20AGESA vendorcode: Fix logic errorKyösti Mälkki
We have not really hit this error, due the test on AGESA_UNSUPPORTED above. Change-Id: I6e7d136a1bb46138cc347225bc4c82cfeaff385d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14394 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-20AMD CIMX: Drop unused codeKyösti Mälkki
We never define B1_IMAGE or B2_IMAGE. These are about building CIMx as separate binary modules, while coreboot builds these into same romstage or ramstage module. Change-Id: I9cfa3f0bff8332aff4b661d56d0e7b340a992992 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14393 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Kerry Sheh <shekairui@gmail.com>
2016-04-16vendorcode/amd/agesa: Fix tautological compareEdward O'Callaghan
An unsigned enum expression is always strictly positive; Comparison with '>= 0' is a tautology, hence remove it. Change-Id: I910d672f8a27d278c2a2fe1e4f39fc61f2c5dbc5 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: https://review.coreboot.org/8207 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-03-31vendorcode/amd/agesa/*/AGESA.h: Correct "ne" to "be" in commentPaul Menzel
The typo is not present anymore in Family 16h (Kabini), so fix it for the older families (Family 10h, 12h, 14h, 15h, 15h Trinity) too using the command below. $ git grep -l ' ne ' src/vendorcode/amd/agesa | xargs sed -i 's/ ne / be /g' Change-Id: I9cb419251eeec79925f48a5832fac339d40f01d1 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/5543 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-02-03vendorcode/amd/agesa/f1{4,2,0} Sync Include directoryEdward O'Callaghan
Sync and merge useless differences. Change-Id: I4eea66c35af66d473dd56db9ccf105c878266f22 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: https://review.coreboot.org/7513 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-03vendorcode/amd/agesa/f15?tn: Strip false/redudant AMD ver tagEdward O'Callaghan
Strip out the AMD internal version tag, e.g. * @e \$Revision: 63425 $ @e \$Date: 2011-12-22 11:24:10 -0600 (Thu, 22 Dec 2011) $ which are false/inconsistent and serve no real meaning or purpose now. Change-Id: I4cca0899eba66a1c361ba784c5ac0222b0ee1aa6 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: https://review.coreboot.org/7516 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-29src/: Chmod 644 all .c, .h, .asl, .inc, .cb, .hex, & Kconfig filesMartin Roth
Some trivial cleanup. Change-Id: I866efc4939b5e036ef02d1acb7b8bb8335671914 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13427 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-28Makefile: Make full use of src-to-obj macroNico Huber
There were several spots in the tree where the path to a per class object file was hardcoded. To make use of the src-to-obj macro for this, it had to be moved before the inclusion of subdirs. Which is fine, as it doesn't have dependencies beside $(obj). Tested by verifying that the resulting coreboot.rom files didn't change for all of Jenkins' abuild configurations. Change-Id: I2eb1beeb8ae55872edfd95f750d7d5a1cee474c4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/13180 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-08vendorcode/amd/agesa/f15tn: Fix out of bounds read on on memory voltageMartin Roth
I think this has a fairly low likelyhood of happening, but if AGESA can't determine the voltage of the memory, it assignes a value of 255 to the variable that it later uses to read from an 3-value array. There is an assert, but that doesn't halt AGESA, so it would use some random value. If the voltage can't be determined, fall back to 1.5v as the default value. Fixes coverity warning 1294803 - Out-of-bounds read Change-Id: Ib9e568175edbdf55a7a4c35055da7169ea7f2ede Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12855 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-07src/vendorcode/amd: correct spelling of MTRRPaul Menzel
Change-Id: I7576591b42fa62da2b3bd74f961fb297b85e250d Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/4806 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-07f14: Increase AP stack to 8k on 64bitStefan Reinauer
This has been broken out from http://review.coreboot.org/#/c/10581/ Change-Id: Ia6153115ff75e21657fa8c244c9eb993d0d63772 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: https://review.coreboot.org/11025 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-06commonlib: Add function to hash contents of a CBFS region.Aaron Durbin
Provide a common routine to hash the contents of a cbfs region. The cbfs region is hashed in the following order: 1. potential cbfs header at offset 0 2. potential cbfs header retlative offset at cbfs size - 4 3. For each file the metadata of the file. 4. For each non-empty file the data of the file. BUG=chrome-os-partner:48412 BUG=chromium:445938 BRANCH=None TEST=Utilized in chromeos cros_bundle_firmware as well as at runtime during vboot verification on glados. Change-Id: Ie1e5db5b8a80d9465e88d3f69f5367d887bdf73f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12786 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-11-12AMD Merlin Falcon: update vendorcode header files to CarrizoPI 1.1.0.1zbao
1. This is required the BLOB change Ie86bb0cf AMD Merlin Falcon: Update to CarrizoPI 1.1.0.1 (Binary PI 1.5) 2. This is tested on Bettong Alfa(DDR3) and Beta(DDR4). Both of the boards can boot to Windows 10. PCIe slots, USB and NIC work. Change-Id: I6cf3e333899f1eb2c00ca84c96deadeea0e23b07 Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/11752 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-06amd/pi/Makefile: Remove cp option '-u'zbao
"-u" is only for GNU cp. Cp of BSD and Solaris don't take this option. It is not necessary to compare the files before copying. Change-Id: I60cf57991275db0e075278f77a95ca5b8b941c7f Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/11601 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30Drop unused code from gcc-intrin.hStefan Reinauer
Change-Id: I3df66320d0bc18221f947b47e7f09533daafabad Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11108 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30cpu/amd: Fix cbtypes.h to match UINTN conventionStefan Reinauer
There are some inconsistencies in AMDs APIs between the coreboot code and the vendorcode code. Unify the API. UINTN maps to uintptr_t in UEFI land. Do the same here. Also switch the other UEFI types to map to fixed size types. Change-Id: Ib46893c7cd5368eae43e9cda30eed7398867ac5b Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Scott Duplichan <scott@notabs.org> Reviewed-on: http://review.coreboot.org/10601 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30vendorcode/amd: 64bit fixesStefan Reinauer
Change-Id: I6a0752cf0c0e484e670acca97c4991b5578845fb Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11081 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-24amd/sb800: Make UsbRxMode per-board customizableTobias Diedrich
On my Foxconn nT-A3500 on cold boot the board doesn't survive the soft reboot in the UsbRxMode path and the vendor bios doesn't touch this Cg2Pll voltage setting either. The fixup code for UsbRxMode in src/vendorcode/amd/cimx/sb800/SBPort.c doesn't seem to "CG PLL multiplier for USB Rx 1.1 mode", but rather lowers the Cg2Pll voltage from the hw default of 1.222V to 1.1V by setting Cg2Pll_IVR_TRIM in CGPllConfig5 to 1000. See also USB_PLL_Voltage which is only used in the UsbRxMode code path. However if this is already the efuse/eprom default for the SB800 then UsbRxMode is a no-op, so whether or not it gets executed depends on the very exact hw revision of the southbridge chip and could change between two instances of the same board. UsbRxMode used to be unitialized and was first set to default to 1 in http://review.coreboot.org/6474 (change I32237ff9, southbridge/amd/cimx/sb800: Uninitialized variables in config func): > > Why initialize those to 1? (just curious) > See src/vendorcode/amd/cimx/sb800/SBTYPE.h > git grep 'SbSpiSpeedSupport\|UsbRxMode' > src/vendorcode/amd/cimx/sb800/SBTYPE.h I could not find a corresponding errata in the SB800 errata list, however errata 15 (USB Resets Asynchronously With Port CF9h Hard Reset) might play into this being unsafe to do since the code uses CF9h to reset. So its possible that while previously undefined it still ended up defaulting to 0 and the codepath exercised on my board is simply buggy or there is a difference between a true "SB800" and the "A50 Hudson M1" presumably used on my board. Change-Id: I33f45925e222b86c0a97ece48f1ba97f6f878499 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/10549 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-22coreboot: introduce commonlibAaron Durbin
Instead of reaching into src/include and re-writing code allow for cleaner code sharing within coreboot and its utilities. The additional thing needed at this point is for the utilities to provide a printk() declaration within a <console/console.h> file. That way code which uses printk() can than be mapped properly to verbosity of utility parameters. Change-Id: I9e46a279569733336bc0a018aed96bc924c07cdd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11592 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-09-16AMD Merlin Falcon: update vendorcode header files to CarrizoPI 1.1.0.0WANG Siyuan
This is required the BLOB change Icb7a4f07 "AMD Merlin Falcon: Update to CarrizoPI 1.1.0.0 (Binary PI 1.4)" This is tested on Bettong Alfa(DDR3) and Beta(DDR4). Both of the boards can boot to Windows 8.1. PCIe slots, USB and NIC work. Change-Id: Ibe141c16f8f9eac2adc5d5f45a1f354fb2a7f33c Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/11148 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2015-09-16AMD Steppe Eagle: update vendorcode header files to MullinsPI 1.0.0.AWANG Siyuan
This is required the BLOB change I67817dc59 AMD Steppe Eagle: Update to MullinsPI 1.0.0.A (Binary PI 1.1). This is tested on Olive Hill Plus. The board can boot to Windows 7. PCIe slot, USB and NIC work. Change-Id: I605df26b61bdffabd74846206ad0b7bf677ebed1 Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/11225 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-09f10/f12: Remove whitespace from gcccar.incStefan Reinauer
:'<,'>s,\ *$,, Change-Id: I9fca0e12f02d6fff4644abacecd4a31cea64bbc1 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11024 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-07vendorcode: Move AMD sources from blobs to vendorcodeMarc Jones
The AMD AGESA binaryPI sources were incorrectly committed to 3rdparty/blobs. Move them from blobs to vendorcode and fix Kconfig and Makefile.inc to match. Change-Id: I55a777553c1203464d7f7f4293b361fedcfa3283 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/10982 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-05vendorcode: Fixup AGESA PI Kconfig variablesMarc Jones
The *_SELECTED Kconfig variables are not needed with the options contained within "if CPU_AMD_AGESA_BINARY_PI" introduced in e4c17ce8. It also removes the need to source and select the default prior to selecting the AGESA source or AGESA PI option. Change-Id: Iffa366f575f7f155bd6c7e7ece2a985f747c83be Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/10981 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-30vendorcode: 64bit fixes for AMD CIMX SB800Stefan Reinauer
Make SB800 code compile with x64 compiler These fixes probably apply 1:1 to the other SB components in that directory. Change-Id: I9ff9f27dff5074d2faf41ebc14bfe50871d9c7f7 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Scott Duplichan <scott@notabs.org> Reviewed-on: http://review.coreboot.org/10573 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-07-30vendorcode: Port AMD Agesa for Fam14 to 64bitStefan Reinauer
Change-Id: Ic6b3c3382a6d3fdc6d716ea899db598910b4fe3e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Scott Duplichan <scott@notabs.org> Reviewed-on: http://review.coreboot.org/10581 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-07-30amd/bettong: Enable fan controlWANG Siyuan
1. Use enable_imc_thermal_zone to enable fan control. 2. The ACPI method ITZE works on Ubuntu 14.04 and Windows 7 but does not work on Windows 8, so I didn't use it. After this issue is fixed, I'll add ACPI_ENABLE_THERMAL_ZONE in bettong/Kconfig. 3. Fan control works on Bettong. I used "APU Validation Toolkit" to test on Windows 8. This tool can put load to APU. The fan's behaviour is just like bettong/fchec.c defined. When the temperature is 40 Celsius, the fan start to run. Change-Id: I0fc22974a7a7cf3f6bdf5f1c66be95219a177e12 Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10721 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-07-30AMD binary PI: add vendorcode support for fan controlWANG Siyuan
Binary PI doesn't provide fan control lib. HwmLateService.c and ImcLib.c are ported from Kabini PI. I have tested on AMD Bettong. The two files work. Change-Id: Ia4d24650d2a5544674e9d44c502e8fd9da0b55d3 Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10719 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-07-07x86: Drop -Wa,--divideStefan Reinauer
Fix up all the code that is using / to use >> for divisions instead. Change-Id: I8a6deb0aa090e0df71d90a5509c911b295833cea Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10819 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-06-23vendorcode: Use cross archiver for libagesa.a on AMD f14Stefan Reinauer
Change-Id: I61a9f65a1ac4c95096d0ff071a95984cf219caa8 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10593 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2015-06-13vendorcode/amd: unify amdlib for binary piStefan Reinauer
Instead of having three copies of amdlib, the glue code for Agesa, let's share the code between all implementations (and come up with a versioned API if needed at some point in the future) Change-Id: I38edffd1bbb04785765d20ca30908a1101c0dda0 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10507 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-06-13AMD Merlin Falcon: Add binary PI vendorcode filesWANG Siyuan
Add all of the PI source that will remain part of coreboot to build with a binary AGESA PI BLOB. This includes the gcc makefiles, some Kconfig, and the AGESA standard library functions. Change vendorcode Makefile and Kconfig so that they can compile AMD library files and use headers from outside the coreboot/src tree. Change-Id: Iad26689292eb123d735023dd29ef3d47396076ea Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10416 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-13amd/pi: Move AGESA cbfs access into the wrapperMarc Jones
The AGESA.c file in 3rdparty has cbfs access functions for locating the AGESA binaries. coreboot access functions need to be within coreboot where they can be updated with cbfs changes. Move the offending function to coreboot. Change-Id: Ibf6136d04dfbdb0198e90cc3ce719dc286c5610e Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/10058 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-053rdparty: move to 3rdparty/blobsPatrick Georgi
There's now room for other repositories under 3rdparty. Change-Id: I51b02d8bf46b5b9f3f8a59341090346dca7fa355 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10109 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-053rdparty: Move to blobsPatrick Georgi
To move 3rdparty to 3rdparty/blobs (ie. below itself from git's broken perspective), we need to work around it - since some git implementations don't like the direct approach. Change-Id: I1fc84bbb37e7c8c91ab14703d609a739b5ca073c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10108 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10vendorcode/amd/agesa/f16kb: Enable support for AM1 socketSergej Ivanov
Adds option FORCE_AM1_SOCKET_SUPPORT to disable package type mismatch check between cpu and northbridge. Default agesa for kabini doesn't know about AM1 socket so it returns FALSE, that stops memory config code. With this hack current agesa version supports the AM1 socket. Change-Id: I99e9cec5cd558087092cf195094df20489f6d3b5 Signed-off-by: Sergej Ivanov <getinaks@gmail.com> Reviewed-on: http://review.coreboot.org/9291 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2015-03-07AMD: Uniformly define MSRs for TOP_MEM and TOP_MEM2Kyösti Mälkki
Make the build tolerate re-definitions. Change-Id: Ia7505837c70b1f749262508b26576e95c7865576 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8609 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-14AMD cimx/sb800: Disable unused GPP portsKyösti Mälkki
If devicetree.cb has GPP port off, really disable it before even trying to do link training. Change-Id: I810945da28d86768e88249dc4d29a50ad9f9959b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8385 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-31vendorcode/amd/agesa/f14: update microcodeNicolas Reinecke
05000028 -> 05000029 tested on asrock E350M1 05000101 -> 05000119 Change-Id: Iccb096eb55a4a789c1e810f68c8c8eacfd5f8a0b Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8296 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-27southbridge/amd/pi: Rename Avalon to HudsonDave Frodin
To maintain consistancy with southbridge/amd/agesa/hudson rename pi/avalon to pi/hudson in advance of adding support for the base hudson southbridge. Change-Id: Icff8c4c06aae2d40cbd9e90903754735ac3510c3 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8251 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-01-27AMD Bald Eagle: Add binary PI vendorcode filesBruce Griffith
Add all of the PI source that will remain part of coreboot to build with a binary AGESA PI BLOB. This includes the gcc makefiles, some Kconfig, and the AGESA standard library functions. Change vendorcode Makefile and Kconfig so that they can compile AMD library files and use headers from outside the coreboot/src tree. This fix changes the makefile so that the AGESA dispatcher is built using its own rules rather than generic library generation rules in coreboot/Makefile and coreboot/Makefile.inc. The AGESA source files are initially copied from whereever they live into coreboot/build/agesa. They are compiled from there. The binary PI directory now has a mandatory structure that places the AGESA BLOB into the same directory as the support headers. These will nominally be placed in the amd directory in SageBIOS or the 3rdparty directory in coreboot.org. Change-Id: I56788cd197159939b64c7d16c1d32418f8cc2197 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/5967 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-01-14vendorcode/amd/agesa: Remove UCODE_VS_FLAG() macro unused variableEdward O'Callaghan
Remove useless AGESA microcode macro that leads to unused variable warnings. Change-Id: Ia21bfc758f81e349bdd0bfd185df75e8b1898336 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8200 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2014-12-31vendorcode/amd/cimx/sbX00: Make SBPort.c filename consistentEdward O'Callaghan
Change-Id: I41ba4cffa545a31c1e0845ec44c8a433bda9f99d Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7886 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-22amd/agesa/f15/Proc/Common/S3SaveState.c: Sync with f15tnEdward O'Callaghan
Change-Id: If46079c1affc7d74767c4215467fd6754b24f20c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7576 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-12-18AMD Trinity: Update SMU firmware from 10.9 to 10.14Zheng Bao
The first dword in FirmwareTN has been changed from 0xa0009 to 0xa000e. The FirmwareTNHeader is not called by any one in latest PI. It seems to be useless for now. Change-Id: Ic7a20e0bcca8de0b56c7bc5d01e0ce86347bde21 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/7844 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-12-16amd/agesa/f*/Lib/amdlib.c: Integer overflow in loop constructEdward O'Callaghan
As is the case in commit: 3312ed7 amd/agesa/f1?/Lib/amdlib.c: Integer overflow in loop construct The semantics of this loop relies on an integer overflow in Index >=0 that implies a return value of (UINT8)-1 which around wraps to 0xFF, or VOLT_UNSUPPORTED. Also fix an infinite loop. Change-Id: Iced3eff3ae7b8935db3bdd6147372cf3b540883c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7676 Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-12vendorcode/amd/pi/00730F01/Lib/amdlib.c: Remove optimize attributeBruce Griffith
Remove '__attribute__((optimize("Os")))' as it is unlikely to be necessary as it is not used in other families that have the same code and only hides deeper issues. Change-Id: Ica890812ebc2fb659b9c3e46b40cf3f6534b3cf2 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/7689 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-10vendorcode/amd/agesa/f16kb/*/PcieComplexDataKB.c: Implicit truncationEdward O'Callaghan
Clang complains: "implicit truncation from 'int' to bitfield changes value from -1 to 15" -1 is define in 'c11std 6.3.1.3p2' as: [Signed and unsigned integers] Otherwise, if the new type is unsigned, the value is converted by repeatedly adding or subtracting one more than the maximum value that can be represented in the new type until the value is in the range of the new type.60) FOOTNOTE.60 The rules describe arithmetic on the mathem... This is "0xFF" on Mullins and "0xF" in this case. Clang seems to complain about this two's complement in a bitfield as being truncated. As the bitfield is 4 bits wide, (a maximum of 15 decimal), we set the field as '0x0F'. Ideally this field /should/ be set to 'UINT8_MAX' however we still have silly truncation warnings. Change-Id: Ib7476d453ffd932bb911e638117cf9f56f71f269 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7719 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-12-08vendorcode/amd/agesa/fam10: Build as a static libraryEdward O'Callaghan
Following the same reasoning as commit ee905a8 vendorcode/amd/agesa/fam15tn: Build as a static library Since AGESA is stage-independent, we can build it just once, and use the resulting static library in both rom and ram stages. Change-Id: I8fbb318daacf64a14a71022705eb040a01c34fa8 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7699 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-08vendorcode/amd/agesa/fam15: Build as a static libraryEdward O'Callaghan
Following the same reasoning as commit ee905a8 vendorcode/amd/agesa/fam15tn: Build as a static library Since AGESA is stage-independent, we can build it just once, and use the resulting static library in both rom and ram stages. Change-Id: I7798b689db3e582649eb4af4ccd1877bb1d49063 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7698 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-07vendorcode/amd/agesa/f1{5,5tn,6kb}: Silence empty loop warnEdward O'Callaghan
Add decorations to specify that empty loop is intended so. Change-Id: Ia3e40d341eca5e26da3832edc733cf1ccc96c136 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Found-by: Clang Reviewed-on: http://review.coreboot.org/7688 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-07vendorcode/amd/agesa/f15tn/*/F15TnMsrTables.c: Topology Extensions SupportEdward O'Callaghan
Topology Extensions Support (bit 54 of 0xC0011005) applies to PACKAGE_TYPE_FS1r2 also. Rids us of: "Re-enabling disabled Topology Extensions Support" showing up in dmesg. Change-Id: Id123fa9632936c150cf1aebc4d34b404a4398ead Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7671 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2014-12-06vendorcode/amd/agesa: Remove unused helper.c fileAlexandru Gagniuc
The contents of these files were guarded by a check for the _MSC_VER macro, which we don't use. Change-Id: Ic595c8e6284c54e1449cf21e0cebee8c9ce7c682 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7670 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-06vendorcode/amd/agesa: Make Porting.h common between familiesEdward O'Callaghan
Change-Id: Ica17b2452498f30b710533caf610c9f0c1a0452c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7594 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-12-06vendorcode/amd/agesa/f15tn: Fix GnbIommuScratch in AGESA compilationEdward O'Callaghan
Missing IOMMU support is missing from the libagesa Makefile, it also lacks a header with type-signature and a few bad typecast issues. Change-Id: I7f2ad2104de9baaa66dbb6ffeb0f2b4d35fa5c16 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Co-Author: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/7642 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-06vendorcode/amd/agesa/fam15tn: Clean #includes in public headersAlexandru Gagniuc
Right now, coreboot code using AGESA headers can only build if all the AGESA path are given to the compiler via the "-I" option. This is sub- optimal, as it requires us to have every AGESA source directory specified as a compiler include path. This pollutes our global include paths. We restrict the compiler include paths to only allow "AGESA_ROOT/" and "AGESA_ROOT/Include". We then modify the AGESA headers to specify non-local include files relative to "AGESA_ROOT/Include". We use the convention that includes relative to the directory of the header are included as "path/to/header.h", while includes relative to AGESA_ROOT are included as <path/to/header.h>. This change allows building coreboot code based on AGESA with the limited subset of include paths, but does not allow AGESA itself to build with this restricted subset. Change-Id: I31102273c8caa8d6b1d80774bfd35711825bec03 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5424 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-05vendorcode/amd/agesa/f15tn: Trim out ASCII art in GnbIommuScratch.cEdward O'Callaghan
TL;DR ASCII art that sucks, remove it. Change-Id: I424736b040fe019bba6155de76903225a266760d Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7641 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-04vendorcode/amd/agesa/f*/cpcar.in: Remove non-GCC CAR implementationEdward O'Callaghan
We don't actually use nor support these as our implementation makes use of gcccar.inc. They maybe useful as a reference for history so lets keep them in version history. Change-Id: I388251dead449dde14283e57db39c37982d947b2 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7596 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-11-28Use AMD_F15_TN_A0 define in FTnLogicalIdTables.cEdward O'Callaghan
Change-Id: I6b20ded866fa0418bd24ce9eef3775557c2feec7 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7562 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-11-27vendorcode/amd/agesa: Use F15TN AGESA for F15RLEdward O'Callaghan
For the moment we make use of Trinity f15tn AGESA for Richland f15rl support until we have properly worked out the discrepancies. Adds RL-A1 Richland stepping cpuid to F15TnLogicalIdTables lookup. We later wish to merge f15tn and f15rl support into the AGESA in any case. Change-Id: Ia9070d4e392ce7eb912771d1c7b3ef1440f8e8a8 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7559 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2014-11-20AMD: Isolate AGESA and PI build environments for southbridgeKyösti Mälkki
To backport features introduced with recent Chromebooks and/or Intel boards in general, heavy work on the AMD AGESA platform infrastructure is required. With the AGESA PI available in binary form only, community members have little means to verify, debug and develop for the said platforms. Thus it makes sense to fork the existing agesawrapper interfaces, to give AMD PI platforms a clean and independent sandbox. New directory layout reflects the separation already taken place under 3rdparty/ and vendorcode/. Change-Id: Ia730f0e45e7c1bdfc0c91e95eb6729a77773e2b9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7388 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Tested-by: build bot (Jenkins)