summaryrefslogtreecommitdiff
path: root/src/superio
AgeCommit message (Expand)Author
2017-06-12superio/ite/common: fix prototype to match othersSamuel Holland
2017-06-12superio/acpi: allow custom HID on generic deviceSamuel Holland
2017-06-12superio/acpi: allow 3 I/O ranges on generic deviceSamuel Holland
2017-06-04superio/winbond/*/header: Include <arch/io.h>Arthur Heymans
2017-05-11superio/nuvoton: Make SuperIO config functions externally availableArthur Heymans
2017-05-09superio/ite/it8728f: Hook up common environment-controller driverTobias Diedrich
2017-03-27superio/fintek: Add support for Fintek F71808ANicola Corna
2016-12-13sio/ite/it8783ef: Return (0) in ACPI _PSC methodsNico Huber
2016-12-07sio/ite/it8783ef: New super i/o chipNico Huber
2016-12-07sio/acpi: Add more magic bytes to ENTER/EXIT_CONFIG_MODENico Huber
2016-12-07sio/ite/common: Export pnp_enter/exit_conf_state()Nico Huber
2016-11-28sio/nuvoton: Include generic nuvoton driver in bootblock stageTeo Boon Tiong
2016-11-28common Ite EC driver: Enable PWM smoothing via devicetreeArthur Heymans
2016-11-28sio/it8718f: Hook up common environment-controller driverArthur Heymans
2016-11-21smscsuperio: map interrupt in smscsuperio_enable_serial()Jonathan A. Kollasch
2016-11-18sio/it8772f: add GPIO blink definition needed by google/trickyMatt DeVillier
2016-11-17sio/ite/common: Add generic environment-controller driverNico Huber
2016-10-19winbond/w83627ehg: Remove unnecessary valueElyes HAOUAS
2016-10-01sio/winbond/w83627dhg: Add ACPI function to control suspend LEDNico Huber
2016-10-01superio/nuvoton: Add back Nuvoton NCT6776 supportTeo Boon Tiong
2016-09-20src/superio: Add space around operatorsElyes HAOUAS
2016-09-05src/superio: Improve code formattingElyes HAOUAS
2016-09-02Fix newlines at the end of filesMartin Roth
2016-08-09superio/*: Relocate Kconfig to chip folder.Omar Pakker
2016-08-02superio/fintek/f81866d: Add support for UART 3/4Fabian Kunkel
2016-07-31superio/nuvoton: Add Nuvoton NCT6791DOmar Pakker
2016-05-29sio/winbond/w83667hg-a: Add pinmux defines for UART BTimothy Pearson
2016-05-29sio/winbond/common: Add function to configure pin muxTimothy Pearson
2016-05-20sio/winbond: Expose enter/exit configuration state functionsTimothy Pearson
2016-04-13superio/smsc/mec1308: Fix AddressMax value for SMBX mailboxMartin Roth
2016-04-08superio/winbond/w83667hg-a: Set SPI device mask correctlyTimothy Pearson
2016-04-02superio/nuvoton: Use official spelling of Nuvoton in `CHIP_NAME`Paul Menzel
2016-03-08roda/rk9: Remove #include early_serial.c from romstageAntonello Dettori
2016-03-05amd/thatcher: Removed #include early_serial.c from romstageAntonello Dettori
2016-02-09superio/nuvoton/nct5572d: Add PS/2 presence detectPaul Menzel
2016-02-01drivers/pc80: Add PS/2 mouse presence detectTimothy Pearson
2016-01-29superio/winbond/w83667hg-a: Add support for W83667HG-ATimothy Pearson
2016-01-18header files: Fix guard name comments to match guard namesMartin Roth
2016-01-13tree: drop last paragraph of GPL copyright header from new filesMartin Roth
2016-01-07Correct some common spelling mistakesMartin Roth
2015-12-31superio/it8772f: Add register to set the default value of FAN speedTed Kuo
2015-12-31superio/it8772f: Add switch to enable HWM (Hardware Monitor)Ted Kuo
2015-12-30superio/it8718f: Add missing PNP infoDamien Zammit
2015-12-29device/pnp: Ability to set vendor specific logical device configDamien Zammit
2015-12-26IT8772F: Clean up it8772f includes and add a LED APIdavid
2015-11-24superio/smsc/mec1308: Fix IASL warningsMartin Roth
2015-11-16Revert "Drop SuperIO nuvoton/nct6779d"Stefan Reinauer
2015-11-10Drop SuperIO fintek/f71889Stefan Reinauer
2015-11-10superio/intel: Add i8900 deviceMarc Jones
2015-11-09superio/windbond: Add WPCD376I deviceMarc Jones
2015-11-04Drop SuperIO smsc/fdc37m60xStefan Reinauer
2015-11-02superio/nuvoton/nct5572d: Add missing logical devicesKyösti Mälkki
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
2015-10-30Drop SuperIO nuvoton/nct6779dStefan Reinauer
2015-10-30Drop SuperIO ite/it8661fStefan Reinauer
2015-10-30Drop SuperIO nuvoton/nct6776Stefan Reinauer
2015-10-30Drop SuperIO nsc/pc97307Stefan Reinauer
2015-10-30Drop SuperIO nsc/pc8374Stefan Reinauer
2015-10-23superio/nuvoton/nct5572d: Enable power state after power failure supportTimothy Pearson
2015-07-13superio/smsc: Add support for SMSC DME1737Jonathan A. Kollasch
2015-07-13superio/smsc/dme1737: copy superio/smsc/lpc47b397Jonathan A. Kollasch
2015-06-22superio: use common x86 code on x86-64Stefan Reinauer
2015-06-21superio/fintek/Kconfig: add newline at end of file.Martin Roth
2015-06-12superio/fintek: Add support for Fintek F81866AD-IFabian Kunkel
2015-06-04devicetree: Discriminate device ops scan_bus()Kyösti Mälkki
2015-05-21Remove address from GPLv2 headersPatrick Georgi
2015-05-19superio/nuvoton: Add support for Nuvoton NCT6779DMatt DeVillier
2015-05-17nuvoton/nct6776: there is no IRQ for LDN8Felix Held
2015-05-14superio: Replace the indexed I/O functionsDave Frodin
2015-05-14superio/nct5104d: Handle shared GPIO/UART pinsKyösti Mälkki
2015-05-14superio/nct5104d: Refactor IRQ trigger configKyösti Mälkki
2015-04-07kconfig: drop intermittend forwarder filesStefan Reinauer
2015-03-21superio: ite8772f: Exit extemp busy stateRyan Lin
2015-02-14superio/fintek/f81216h: Add the correct unlock key valuesDave Frodin
2015-02-04superio/fintek: Add required changes so F81216H can be usedDave Frodin
2015-01-06superio: Drop print_ implementation from non-romcc boardsStefan Reinauer
2015-01-06superio/smsc/lpc47n217: Drop dead codeStefan Reinauer
2015-01-06superio/smsc/lpc47n207: Hook into build systemEdward O'Callaghan
2015-01-04superio/smsc/lpc47b272/superio.c: Remove dead codeEdward O'Callaghan
2015-01-04src/superio/smsc/lpc47m10x/superio.c: Remove dead codeEdward O'Callaghan
2015-01-04superio/smsc/lpc47b272: Use link-time symbols over .c inclusionEdward O'Callaghan
2015-01-04superio/smsc/lpc47m10x: Use link-time symbols over .c inclusionEdward O'Callaghan
2015-01-04superio/smsc/lpc47b397: Use link-time symbols over .c inclusionEdward O'Callaghan
2015-01-04superio/nsc/pc87417: Use link-time symbols over .c inclusionEdward O'Callaghan
2015-01-04superio/nsc/pc87366: Use link-time symbols over .c inclusionEdward O'Callaghan
2015-01-04superio/nsc/pc97317: Use link-time symbols over .c inclusionEdward O'Callaghan
2015-01-04superio/intel/i3100: Use link-time symbol over .c includesEdward O'Callaghan
2015-01-04superio/nsc/pc87360: Use link-time symbol over .c includesEdward O'Callaghan
2014-12-18Drop Intel E7520 and E7525 and related boardsStefan Reinauer
2014-12-16Drop obsolete SuperIOs used by GX1 systems onlyStefan Reinauer
2014-12-01Mark non-executable files non-executablePatrick Georgi
2014-11-04superio/ite: Use common dispatch for pnp entry/exit functionsEdward O'Callaghan
2014-11-01superio/fintek/f81216h: Implement device supportEdward O'Callaghan
2014-11-01superio/common/conf_mode.c: Introduce 'new' enter/exit keys for SIO'sEdward O'Callaghan
2014-10-30superio/nuvoton: Add support for Nuvoton NCT6776Felix Held
2014-10-30superio/nuvoton: Add support for Nuvoton NCT5572DFelix Held
2014-10-27{arch,cpu,drivers,ec}: Don't hide pointers behind typedefsEdward O'Callaghan
2014-10-27superio/*/superio.c: Don't hide pointer types behind typedefsEdward O'Callaghan
2014-10-27superio: Use 'pnp_devfn_t' over 'device_t' in romstage componentEdward O'Callaghan
2014-10-27superio/common/conf_mode.c: Don't hide pointers with typedefsEdward O'Callaghan
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 03:26:43 +0000